tty: esp: remove broken driver

The ESP driver has been marked broken for years. It's an old ISA device
that clearly nobody cares about any more. Remove it

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2 files changed, 0 insertions, 115 deletions

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 5a5385749e1..f72914db2a1 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -214,7 +214,6 @@ unifdef-y += futex.h
 unifdef-y += fs.h
 unifdef-y += gameport.h
 unifdef-y += generic_serial.h
-unifdef-y += hayesesp.h
 unifdef-y += hdlcdrv.h
 unifdef-y += hdlc.h
 unifdef-y += hdreg.h
diff --git a/include/linux/hayesesp.h b/include/linux/hayesesp.h
deleted file mode 100644
index 92b08cfe4a7..00000000000
--- a/include/linux/hayesesp.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef HAYESESP_H
-#define HAYESESP_H
-
-struct hayes_esp_config {
-	short flow_on;
-	short flow_off;
-	short rx_trigger;
-	short tx_trigger;
-	short pio_threshold;
-	unsigned char rx_timeout;
-	char dma_channel;
-};
-
-#ifdef __KERNEL__
-
-#define ESP_DMA_CHANNEL   0
-#define ESP_RX_TRIGGER    768
-#define ESP_TX_TRIGGER    768
-#define ESP_FLOW_OFF      1016
-#define ESP_FLOW_ON       944
-#define ESP_RX_TMOUT      128
-#define ESP_PIO_THRESHOLD 32
-
-#define ESP_IN_MAJOR	57	/* major dev # for dial in */
-#define ESP_OUT_MAJOR	58	/* major dev # for dial out */
-#define ESPC_SCALE 	3
-#define UART_ESI_BASE	0x00
-#define UART_ESI_SID	0x01
-#define UART_ESI_RX	0x02
-#define UART_ESI_TX	0x02
-#define UART_ESI_CMD1	0x04
-#define UART_ESI_CMD2	0x05
-#define UART_ESI_STAT1	0x04
-#define UART_ESI_STAT2	0x05
-#define UART_ESI_RWS	0x07
-
-#define UART_IER_DMA_TMOUT	0x80
-#define UART_IER_DMA_TC		0x08
-
-#define ESI_SET_IRQ		0x04
-#define ESI_SET_DMA_TMOUT	0x05
-#define ESI_SET_SRV_MASK	0x06
-#define ESI_SET_ERR_MASK	0x07
-#define ESI_SET_FLOW_CNTL	0x08
-#define ESI_SET_FLOW_CHARS	0x09
-#define ESI_SET_FLOW_LVL	0x0a
-#define ESI_SET_TRIGGER		0x0b
-#define ESI_SET_RX_TIMEOUT	0x0c
-#define ESI_SET_FLOW_TMOUT	0x0d
-#define ESI_WRITE_UART		0x0e
-#define ESI_READ_UART		0x0f
-#define ESI_SET_MODE		0x10
-#define ESI_GET_ERR_STAT	0x12
-#define ESI_GET_UART_STAT	0x13
-#define ESI_GET_RX_AVAIL	0x14
-#define ESI_GET_TX_AVAIL	0x15
-#define ESI_START_DMA_RX	0x16
-#define ESI_START_DMA_TX	0x17
-#define ESI_ISSUE_BREAK		0x1a
-#define ESI_FLUSH_RX		0x1b
-#define ESI_FLUSH_TX		0x1c
-#define ESI_SET_BAUD		0x1d
-#define ESI_SET_ENH_IRQ		0x1f
-#define ESI_SET_REINTR		0x20
-#define ESI_SET_PRESCALAR	0x23
-#define ESI_NO_COMMAND		0xff
-
-#define ESP_STAT_RX_TIMEOUT	0x01
-#define ESP_STAT_DMA_RX		0x02
-#define ESP_STAT_DMA_TX		0x04
-#define ESP_STAT_NEVER_DMA      0x08
-#define ESP_STAT_USE_PIO        0x10
-
-#define ESP_MAGIC		0x53ee
-#define ESP_XMIT_SIZE		4096
-
-struct esp_struct {
-	int			magic;
-	struct tty_port		port;
-	spinlock_t		lock;
-	int			io_port;
-	int			irq;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			stat_flags;
-	int			custom_divisor;
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
-	int			IER; 	/* Interrupt Enable Register */
-	int			MCR; 	/* Modem control register */
-	unsigned long		last_active;
-	int			line;
-	unsigned char 		*xmit_buf;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	wait_queue_head_t	break_wait;
-	struct async_icount	icount;	/* kernel counters for the 4 input interrupts */
-	struct hayes_esp_config config; /* port configuration */
-	struct esp_struct	*next_port; /* For the linked list */
-};
-
-struct esp_pio_buffer {
-	unsigned char data[1024];
-	struct esp_pio_buffer *next;
-};
-
-#endif /* __KERNEL__ */
-
-
-#endif /* ESP_H */
-