ENGR00121497-2 MX28 USB 100mA current draw

Add USB 100mA limitation feature for mx28 to mach usb 2.0 current requirment

Signed-off-by: Frank Li <Frank.li@freescale.com>

5 files changed, 91 insertions, 15 deletions

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 8793ce6972a..f90ffbf4c43 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -117,4 +117,11 @@ config BATTERY_MXS
 	  Say Y to enable support for the battery charger state machine
 	  for the Sigmatel MXS based SoC's.
 
+config MXS_VBUS_CURRENT_DRAW
+	tristate "MXS SoC USB2.0 VBUS Current Limitation"
+	depends on ARCH_MXS
+	help
+	  Say Y to enable 100mA limitation when USB vbus power on system
+	  before enumeration to match USB2.0 requirement.
+
 endif # POWER_SUPPLY
diff --git a/drivers/power/mxs/ddi_power_battery.c b/drivers/power/mxs/ddi_power_battery.c
index c17b2da86ff..101e38e6b8d 100644
--- a/drivers/power/mxs/ddi_power_battery.c
+++ b/drivers/power/mxs/ddi_power_battery.c
@@ -888,6 +888,12 @@ int ddi_power_init_battery(void)
 			power driver behavior may not be reliable \n");
 		ret = 1;
 	}
+	if ((__raw_readl(REGS_POWER_BASE + HW_POWER_BATTMONITOR) &
+		BM_POWER_BATTMONITOR_BATT_VAL) == 0) {
+		ret = 1;
+		printk(KERN_INFO "WARNING : No battery connected !\r\n");
+		return ret;
+	}
 
 	/* the following code to enable automatic battery measurement
 	 * should have already been enabled in the boot prep files.  Not
diff --git a/drivers/power/mxs/linux.c b/drivers/power/mxs/linux.c
index ce8b0e3ed75..3cd173d640c 100644
--- a/drivers/power/mxs/linux.c
+++ b/drivers/power/mxs/linux.c
@@ -18,6 +18,7 @@
 #include <linux/jiffies.h>
 #include <linux/io.h>
 #include <linux/sched.h>
+#include <linux/clk.h>
 #include <mach/ddi_bc.h>
 #include "ddi_bc_internal.h"
 #include <linux/regulator/consumer.h>
@@ -26,6 +27,7 @@
 #include <mach/regs-power.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/clock.h>
 #include <linux/delay.h>
 #include <linux/proc_fs.h>
 #include <linux/interrupt.h>
@@ -229,9 +231,25 @@ static void check_and_handle_5v_connection(struct mxs_info *info)
 					_5v_connected_verified;
 				dev_info(info->dev,
 					"5v connection verified\n");
+#ifdef CONFIG_MXS_VBUS_CURRENT_DRAW
+	#ifdef CONFIG_USB_GADGET
+		/* if there is USB 2.0 current limitation requirement,
+		* waiting for USB enum done.
+		*/
+		if ((__raw_readl(REGS_POWER_BASE + HW_POWER_5VCTRL)
+			& BM_POWER_5VCTRL_CHARGE_4P2_ILIMIT) ==
+			(0x8 << BP_POWER_5VCTRL_CHARGE_4P2_ILIMIT)) {
+			dev_info(info->dev, "waiting USB enum done...\r\n");
+		}
+		while ((__raw_readl(REGS_POWER_BASE + HW_POWER_5VCTRL)
+			& BM_POWER_5VCTRL_CHARGE_4P2_ILIMIT)
+			== (0x8 << BP_POWER_5VCTRL_CHARGE_4P2_ILIMIT)) {
+			msleep(50);
+		}
+	#endif
+#endif
 				ddi_power_Enable4p2(450);
 
-
 				/* part of handling for errata.  It is
 				 *  now "somewhat" safe to
 				 * turn on vddio interrupts again
@@ -278,6 +296,12 @@ static void check_and_handle_5v_connection(struct mxs_info *info)
 				dev_info(info->dev,
 					"5v disconnection handled\n");
 
+				__raw_writel(__raw_readl(REGS_POWER_BASE +
+				HW_POWER_5VCTRL) &
+				(~BM_POWER_5VCTRL_CHARGE_4P2_ILIMIT)
+				| (0x8 << BP_POWER_5VCTRL_CHARGE_4P2_ILIMIT),
+				REGS_POWER_BASE + HW_POWER_5VCTRL);
+
 			}
 		}
 
@@ -494,8 +518,7 @@ static void state_machine_work(struct work_struct *work)
 	}
 
 	/* if we made it here, we have a verified 5v connection */
-
-	if (is_ac_online()) {
+#ifndef CONFIG_MXS_VBUS_CURRENT_DRAW
 		if (info->is_ac_online)
 			goto done;
 
@@ -518,7 +541,7 @@ static void state_machine_work(struct work_struct *work)
 		}
 		ddi_bc_SetEnable();
 		goto done;
-	}
+#else
 
 	if (!is_usb_online())
 		goto out;
@@ -557,7 +580,7 @@ static void state_machine_work(struct work_struct *work)
 	info->is_usb_online |= USB_REG_SET;
 
 	dev_info(info->dev, "changed power connection to usb/5v present\n");
-
+#endif
 
 done:
 	ddi_bc_StateMachine();
@@ -1073,6 +1096,8 @@ static struct proc_dir_entry *power_fiq_proc;
 
 static int __init mxs_bat_init(void)
 {
+	struct clk *cpu, *pll0;
+
 #ifdef POWER_FIQ
 	int ret;
 	ret = claim_fiq(&power_fiq);
@@ -1118,6 +1143,28 @@ static int __init mxs_bat_init(void)
 	}
 #endif
 
+#ifdef CONFIG_MXS_VBUS_CURRENT_DRAW
+	if (((__raw_readl(REGS_POWER_BASE + HW_POWER_5VCTRL) &
+		BM_POWER_5VCTRL_CHARGE_4P2_ILIMIT) == 0x8000)
+		&& ((__raw_readl(REGS_POWER_BASE + HW_POWER_5VCTRL) &
+		BM_POWER_5VCTRL_PWD_CHARGE_4P2) == 0)) {
+#ifdef CONFIG_USB_GADGET
+		printk(KERN_INFO "USB GADGET exist,wait USB enum done...\r\n");
+		while (((__raw_readl(REGS_POWER_BASE + HW_POWER_5VCTRL)
+			& BM_POWER_5VCTRL_CHARGE_4P2_ILIMIT) == 0x8000) &&
+			((__raw_readl(REGS_POWER_BASE + HW_POWER_5VCTRL) &
+			BM_POWER_5VCTRL_PWD_CHARGE_4P2) == 0))
+			;
+#else
+		printk(KERN_INFO "USB GADGET not exist,\
+		release current limit and let CPU clock up...\r\n");
+#endif
+	}
+	cpu = clk_get(NULL, "cpu");
+	pll0 = clk_get(NULL, "ref_cpu");
+	if (cpu->set_parent)
+		cpu->set_parent(cpu, pll0);
+#endif
 	return platform_driver_register(&mxs_batdrv);
 }
 
@@ -1125,8 +1172,11 @@ static void __exit mxs_bat_exit(void)
 {
 	platform_driver_unregister(&mxs_batdrv);
 }
-
-module_init(mxs_bat_init);
+#ifdef CONFIG_MXS_VBUS_CURRENT_DRAW
+	fs_initcall(mxs_bat_init);
+#else
+	module_init(mxs_bat_init);
+#endif
 module_exit(mxs_bat_exit);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/arcotg_udc.c b/drivers/usb/gadget/arcotg_udc.c
index 2f7612df686..58bb833fd97 100644
--- a/drivers/usb/gadget/arcotg_udc.c
+++ b/drivers/usb/gadget/arcotg_udc.c
@@ -1356,10 +1356,16 @@ static int fsl_vbus_session(struct usb_gadget *gadget, int is_active)
 static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 {
 	struct fsl_udc *udc;
+	struct fsl_usb2_platform_data *pdata;
 
 	udc = container_of(gadget, struct fsl_udc, gadget);
 	if (udc->transceiver)
 		return otg_set_power(udc->transceiver, mA);
+	pdata = udc->pdata;
+	if (pdata->xcvr_ops && pdata->xcvr_ops->set_vbus_draw) {
+		pdata->xcvr_ops->set_vbus_draw(pdata->xcvr_ops, pdata, mA);
+		return 0;
+	}
 	return -ENOTSUPP;
 }
 
@@ -1515,7 +1521,8 @@ static void setup_received_irq(struct fsl_udc *udc,
 	u16 wValue = le16_to_cpu(setup->wValue);
 	u16 wIndex = le16_to_cpu(setup->wIndex);
 	u16 wLength = le16_to_cpu(setup->wLength);
-
+	struct usb_gadget *gadget = &(udc->gadget);
+	unsigned mA = 500;
 	udc_reset_ep_queue(udc, 0);
 
 	if (wLength) {
@@ -1544,7 +1551,8 @@ static void setup_received_irq(struct fsl_udc *udc,
 			break;
 		ch9setaddress(udc, wValue, wIndex, wLength);
 		return;
-
+	case USB_REQ_SET_CONFIGURATION:
+		fsl_vbus_draw(gadget, mA);
 	case USB_REQ_CLEAR_FEATURE:
 	case USB_REQ_SET_FEATURE:
 		/* Status phase from udc */
@@ -3069,9 +3077,11 @@ static int __init udc_init(void)
 	printk(KERN_INFO "%s (%s)\n", driver_desc, DRIVER_VERSION);
 	return platform_driver_register(&udc_driver);
 }
-
-module_init(udc_init);
-
+#ifdef CONFIG_MXS_VBUS_CURRENT_DRAW
+	fs_initcall(udc_init);
+#else
+	module_init(udc_init);
+#endif
 static void __exit udc_exit(void)
 {
 	platform_driver_unregister(&udc_driver);
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 42a74b8a0bb..2b8c435db49 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2004-2007 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2004-2010 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Author: Li Yang <leoli@freescale.com>
  *         Jiang Bo <tanya.jiang@freescale.com>
@@ -2475,8 +2475,11 @@ static int __init udc_init(void)
 	return platform_driver_probe(&udc_driver, fsl_udc_probe);
 }
 
-module_init(udc_init);
-
+#ifdef CONFIG_MXS_VBUS_CURRENT_DRAW
+	fs_initcall(udc_init);
+#else
+	module_init(udc_init);
+#endif
 static void __exit udc_exit(void)
 {
 	platform_driver_unregister(&udc_driver);