mtd: nand: more BB Detection refactoring and dynamic scan options

This is a revision to PATCH 2/2 that I sent. Link:
http://lists.infradead.org/pipermail/linux-mtd/2010-July/030911.html

Added new flag for scanning of both bytes 1 and 6 of the OOB for
a BB marker (instead of simply one or the other).

The "check_pattern" and "check_short_pattern" functions were updated
to include support for scanning the two different locations in the OOB.

In order to handle increases in variety of necessary scanning patterns,
I implemented dynamic memory allocation of nand_bbt_descr structs
in new function 'nand_create_default_bbt_descr()'. This replaces
some increasingly-unwieldy, statically-declared descriptors. It can
replace several more (e.g. "flashbased" structs). However, I do not
test the flashbased options personally.

How this was tested:

I referenced 30+ data sheets (covering 100+ parts), and I tested a
selection of 10 different chips to varying degrees. Particularly, I
tested the creation of bad-block descriptors and basic BB scanning on
three parts:

ST NAND04GW3B2D, 2K page
ST NAND128W3A, 512B page
Samsung K9F1G08U0A, 2K page

To test these, I wrote some fake bad block markers to the flash (in OOB
bytes 1, 6, and elsewhere) to see if the scanning routine would detect
them properly. However, this method was somewhat limited because the
driver I am using has some bugs in its OOB write functionality.

Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 14 insertions, 0 deletions

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index bd697909db5..c2901bd126f 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2963,6 +2963,15 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 			 *maf_id == NAND_MFR_MICRON))
 		chip->options |= NAND_BBT_SCAN2NDPAGE;
 
+	/*
+	 * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6
+	 */
+	if (!(busw & NAND_BUSWIDTH_16) &&
+			*maf_id == NAND_MFR_STMICRO &&
+			mtd->writesize == 2048) {
+		chip->options |= NAND_BBT_SCANBYTE1AND6;
+		chip->badblockpos = 0;
+	}
 
 	/* Check for AND chips with 4 page planes */
 	if (chip->options & NAND_4PAGE_ARRAY)
@@ -3322,6 +3331,11 @@ void nand_release(struct mtd_info *mtd)
 	kfree(chip->bbt);
 	if (!(chip->options & NAND_OWN_BUFFERS))
 		kfree(chip->buffers);
+
+	/* Free bad block descriptor memory */
+	if (chip->badblock_pattern && chip->badblock_pattern->options
+			& NAND_BBT_DYNAMICSTRUCT)
+		kfree(chip->badblock_pattern);
 }
 
 EXPORT_SYMBOL_GPL(nand_lock);