aboutsummaryrefslogtreecommitdiff
path: root/Documentation/sound/alsa
diff options
context:
space:
mode:
authorTakashi Iwai <tiwai@suse.de>2005-11-17 17:26:09 +0100
committerJaroslav Kysela <perex@suse.cz>2006-01-03 12:28:55 +0100
commit5fe76e4dc60a2c3ff9b1143f5275a953db685e26 (patch)
treef54acdb029f429bf8c0068ed964a1216fbe614d3 /Documentation/sound/alsa
parenta4efc230c60ad15584e723755316e67b3c708d67 (diff)
[ALSA] document - Update PM support
Modules: Documentation Update the description about the PCI PM support. Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'Documentation/sound/alsa')
-rw-r--r--Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl185
1 files changed, 146 insertions, 39 deletions
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index f2e59fe802b..4963d83d151 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -18,8 +18,8 @@
</affiliation>
</author>
- <date>October 6, 2005</date>
- <edition>0.3.5</edition>
+ <date>November 17, 2005</date>
+ <edition>0.3.6</edition>
<abstract>
<para>
@@ -2329,9 +2329,14 @@ struct _snd_pcm_runtime {
<constant>PAUSE</constant> bit means that the pcm supports the
<quote>pause</quote> operation, while the
<constant>RESUME</constant> bit means that the pcm supports
- the <quote>suspend/resume</quote> operation. If these flags
- are set, the <structfield>trigger</structfield> callback below
- must handle the corresponding commands.
+ the full <quote>suspend/resume</quote> operation.
+ If <constant>PAUSE</constant> flag is set,
+ the <structfield>trigger</structfield> callback below
+ must handle the corresponding (pause push/release) commands.
+ The suspend/resume trigger commands can be defined even without
+ <constant>RESUME</constant> flag. See <link
+ linkend="power-management"><citetitle>
+ Power Management</citetitle></link> section for details.
</para>
<para>
@@ -2903,8 +2908,8 @@ struct _snd_pcm_runtime {
</para>
<para>
- When the pcm supports the suspend/resume operation
- (i.e. <constant>SNDRV_PCM_INFO_RESUME</constant> flag is set),
+ When the pcm supports the suspend/resume operation,
+ regardless of full or partial suspend/resume support,
<constant>SUSPEND</constant> and <constant>RESUME</constant>
commands must be handled, too.
These commands are issued when the power-management status is
@@ -2913,6 +2918,8 @@ struct _snd_pcm_runtime {
do suspend and resume of the pcm substream, and usually, they
are identical with <constant>STOP</constant> and
<constant>START</constant> commands, respectively.
+ See <link linkend="power-management"><citetitle>
+ Power Management</citetitle></link> section for details.
</para>
<para>
@@ -5483,22 +5490,60 @@ struct _snd_pcm_runtime {
<constant>CONFIG_PM</constant>.
</para>
+ <para>
+ If the driver supports the suspend/resume
+ <emphasis>fully</emphasis>, that is, the device can be
+ properly resumed to the status at the suspend is called,
+ you can set <constant>SNDRV_PCM_INFO_RESUME</constant> flag
+ to pcm info field. Usually, this is possible when the
+ registers of ths chip can be safely saved and restored to the
+ RAM. If this is set, the trigger callback is called with
+ <constant>SNDRV_PCM_TRIGGER_RESUME</constant> after resume
+ callback is finished.
+ </para>
+
+ <para>
+ Even if the driver doesn't support PM fully but only the
+ partial suspend/resume is possible, it's still worthy to
+ implement suspend/resume callbacks. In such a case, applications
+ would reset the status by calling
+ <function>snd_pcm_prepare()</function> and restart the stream
+ appropriately. Hence, you can define suspend/resume callbacks
+ below but don't set <constant>SNDRV_PCM_INFO_RESUME</constant>
+ info flag to the PCM.
+ </para>
+
+ <para>
+ Note that the trigger with SUSPEND can be always called when
+ <function>snd_pcm_suspend_all</function> is called,
+ regardless of <constant>SNDRV_PCM_INFO_RESUME</constant> flag.
+ The <constant>RESUME</constant> flag affects only the behavior
+ of <function>snd_pcm_resume()</function>.
+ (Thus, in theory,
+ <constant>SNDRV_PCM_TRIGGER_RESUME</constant> isn't needed
+ to be handled in the trigger callback when no
+ <constant>SNDRV_PCM_INFO_RESUME</constant> flag is set. But,
+ it's better to keep it for compatibility reason.)
+ </para>
<para>
- ALSA provides the common power-management layer. Each card driver
- needs to have only low-level suspend and resume callbacks.
+ In the earlier version of ALSA drivers, a common
+ power-management layer was provided, but it has been removed.
+ The driver needs to define the suspend/resume hooks according to
+ the bus the device is assigned. In the case of PCI driver, the
+ callbacks look like below:
<informalexample>
<programlisting>
<![CDATA[
#ifdef CONFIG_PM
- static int snd_my_suspend(struct snd_card *card, pm_message_t state)
+ static int snd_my_suspend(struct pci_dev *pci, pm_message_t state)
{
- .... // do things for suspsend
+ .... /* do things for suspsend */
return 0;
}
- static int snd_my_resume(struct snd_card *card)
+ static int snd_my_resume(struct pci_dev *pci)
{
- .... // do things for suspsend
+ .... /* do things for suspsend */
return 0;
}
#endif
@@ -5511,11 +5556,18 @@ struct _snd_pcm_runtime {
The scheme of the real suspend job is as following.
<orderedlist>
- <listitem><para>Retrieve the chip data from pm_private_data field.</para></listitem>
+ <listitem><para>Retrieve the card and the chip data.</para></listitem>
+ <listitem><para>Call <function>snd_power_change_state()</function> with
+ <constant>SNDRV_CTL_POWER_D3hot</constant> to change the
+ power status.</para></listitem>
<listitem><para>Call <function>snd_pcm_suspend_all()</function> to suspend the running PCM streams.</para></listitem>
+ <listitem><para>If AC97 codecs are used, call
+ <function>snd_ac97_resume()</function> for each codec.</para></listitem>
<listitem><para>Save the register values if necessary.</para></listitem>
<listitem><para>Stop the hardware if necessary.</para></listitem>
- <listitem><para>Disable the PCI device by calling <function>pci_disable_device()</function>.</para></listitem>
+ <listitem><para>Disable the PCI device by calling
+ <function>pci_disable_device()</function>. Then, call
+ <function>pci_save_state()</function> at last.</para></listitem>
</orderedlist>
</para>
@@ -5525,18 +5577,24 @@ struct _snd_pcm_runtime {
<informalexample>
<programlisting>
<![CDATA[
- static int mychip_suspend(struct snd_card *card, pm_message_t state)
+ static int mychip_suspend(strut pci_dev *pci, pm_message_t state)
{
/* (1) */
- struct mychip *chip = card->pm_private_data;
+ struct snd_card *card = pci_get_drvdata(pci);
+ struct mychip *chip = card->private_data;
/* (2) */
- snd_pcm_suspend_all(chip->pcm);
+ snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
/* (3) */
- snd_mychip_save_registers(chip);
+ snd_pcm_suspend_all(chip->pcm);
/* (4) */
- snd_mychip_stop_hardware(chip);
+ snd_ac97_suspend(chip->ac97);
/* (5) */
- pci_disable_device(chip->pci);
+ snd_mychip_save_registers(chip);
+ /* (6) */
+ snd_mychip_stop_hardware(chip);
+ /* (7) */
+ pci_disable_device(pci);
+ pci_save_state(pci);
return 0;
}
]]>
@@ -5548,14 +5606,17 @@ struct _snd_pcm_runtime {
The scheme of the real resume job is as following.
<orderedlist>
- <listitem><para>Retrieve the chip data from pm_private_data field.</para></listitem>
- <listitem><para>Enable the pci device again by calling
- <function>pci_enable_device()</function>.</para></listitem>
+ <listitem><para>Retrieve the card and the chip data.</para></listitem>
+ <listitem><para>Set up PCI. First, call <function>pci_restore_state()</function>.
+ Then enable the pci device again by calling <function>pci_enable_device()</function>.
+ Call <function>pci_set_master()</function> if necessary, too.</para></listitem>
<listitem><para>Re-initialize the chip.</para></listitem>
<listitem><para>Restore the saved registers if necessary.</para></listitem>
<listitem><para>Resume the mixer, e.g. calling
<function>snd_ac97_resume()</function>.</para></listitem>
<listitem><para>Restart the hardware (if any).</para></listitem>
+ <listitem><para>Call <function>snd_power_change_state()</function> with
+ <constant>SNDRV_CTL_POWER_D0</constant> to notify the processes.</para></listitem>
</orderedlist>
</para>
@@ -5565,12 +5626,15 @@ struct _snd_pcm_runtime {
<informalexample>
<programlisting>
<![CDATA[
- static void mychip_resume(struct mychip *chip)
+ static int mychip_resume(struct pci_dev *pci)
{
/* (1) */
- struct mychip *chip = card->pm_private_data;
+ struct snd_card *card = pci_get_drvdata(pci);
+ struct mychip *chip = card->private_data;
/* (2) */
- pci_enable_device(chip->pci);
+ pci_restore_state(pci);
+ pci_enable_device(pci);
+ pci_set_master(pci);
/* (3) */
snd_mychip_reinit_chip(chip);
/* (4) */
@@ -5579,6 +5643,8 @@ struct _snd_pcm_runtime {
snd_ac97_resume(chip->ac97);
/* (6) */
snd_mychip_restart_chip(chip);
+ /* (7) */
+ snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
}
]]>
@@ -5587,8 +5653,48 @@ struct _snd_pcm_runtime {
</para>
<para>
- OK, we have all callbacks now. Let's set up them now. In the
- initialization of the card, add the following:
+ As shown in the above, it's better to save registers after
+ suspending the PCM operations via
+ <function>snd_pcm_suspend_all()</function> or
+ <function>snd_pcm_suspend()</function>. It means that the PCM
+ streams are already stoppped when the register snapshot is
+ taken. But, remind that you don't have to restart the PCM
+ stream in the resume callback. It'll be restarted via
+ trigger call with <constant>SNDRV_PCM_TRIGGER_RESUME</constant>
+ when necessary.
+ </para>
+
+ <para>
+ OK, we have all callbacks now. Let's set them up. In the
+ initialization of the card, make sure that you can get the chip
+ data from the card instance, typically via
+ <structfield>private_data</structfield> field, in case you
+ created the chip data individually.
+
+ <informalexample>
+ <programlisting>
+<![CDATA[
+ static int __devinit snd_mychip_probe(struct pci_dev *pci,
+ const struct pci_device_id *pci_id)
+ {
+ ....
+ struct snd_card *card;
+ struct mychip *chip;
+ ....
+ card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
+ ....
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ ....
+ card->private_data = chip;
+ ....
+ }
+]]>
+ </programlisting>
+ </informalexample>
+
+ When you created the chip data with
+ <function>snd_card_new()</function>, it's anyway accessible
+ via <structfield>private_data</structfield> field.
<informalexample>
<programlisting>
@@ -5600,30 +5706,28 @@ struct _snd_pcm_runtime {
struct snd_card *card;
struct mychip *chip;
....
- snd_card_set_pm_callback(card, snd_my_suspend, snd_my_resume, chip);
+ card = snd_card_new(index[dev], id[dev], THIS_MODULE,
+ sizeof(struct mychip));
+ ....
+ chip = card->private_data;
....
}
]]>
</programlisting>
</informalexample>
- Here you don't have to put ifdef CONFIG_PM around, since it's already
- checked in the header and expanded to empty if not needed.
</para>
<para>
- If you need a space for saving the registers, you'll need to
- allocate the buffer for it here, too, since it would be fatal
+ If you need a space for saving the registers, allocate the
+ buffer for it here, too, since it would be fatal
if you cannot allocate a memory in the suspend phase.
The allocated buffer should be released in the corresponding
destructor.
</para>
<para>
- And next, set suspend/resume callbacks to the pci_driver,
- This can be done by passing a macro SND_PCI_PM_CALLBACKS
- in the pci_driver struct. This macro is expanded to the correct
- (global) callbacks if CONFIG_PM is set.
+ And next, set suspend/resume callbacks to the pci_driver.
<informalexample>
<programlisting>
@@ -5633,7 +5737,10 @@ struct _snd_pcm_runtime {
.id_table = snd_my_ids,
.probe = snd_my_probe,
.remove = __devexit_p(snd_my_remove),
- SND_PCI_PM_CALLBACKS
+ #ifdef CONFIG_PM
+ .suspend = snd_my_suspend,
+ .resume = snd_my_resume,
+ #endif
};
]]>
</programlisting>