/* * Wavelan Pcmcia driver * * Jean II - HPLB '96 * * Reorganisation and extension of the driver. * * This file contain all definition and declarations necessary for the * wavelan pcmcia driver. This file is a private header, so it should * be included only on wavelan_cs.c !!! */ #ifndef WAVELAN_CS_P_H #define WAVELAN_CS_P_H /************************** DOCUMENTATION **************************/ /* * This driver provide a Linux interface to the Wavelan Pcmcia hardware * The Wavelan is a product of Lucent (http://www.wavelan.com/). * This division was formerly part of NCR and then AT&T. * Wavelan are also distributed by DEC (RoamAbout DS)... * * To know how to use this driver, read the PCMCIA HOWTO. * If you want to exploit the many other fonctionalities, look comments * in the code... * * This driver is the result of the effort of many peoples (see below). */ /* ------------------------ SPECIFIC NOTES ------------------------ */ /* * Web page * -------- * I try to maintain a web page with the Wireless LAN Howto at : * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html * * SMP * --- * We now are SMP compliant (I eventually fixed the remaining bugs). * The driver has been tested on a dual P6-150 and survived my usual * set of torture tests. * Anyway, I spent enough time chasing interrupt re-entrancy during * errors or reconfigure, and I designed the locked/unlocked sections * of the driver with great care, and with the recent addition of * the spinlock (thanks to the new API), we should be quite close to * the truth. * The SMP/IRQ locking is quite coarse and conservative (i.e. not fast), * but better safe than sorry (especially at 2 Mb/s ;-). * * I have also looked into disabling only our interrupt on the card * (via HACR) instead of all interrupts in the processor (via cli), * so that other driver are not impacted, and it look like it's * possible, but it's very tricky to do right (full of races). As * the gain would be mostly for SMP systems, it can wait... * * Debugging and options * --------------------- * You will find below a set of '#define" allowing a very fine control * on the driver behaviour and the debug messages printed. * The main options are : * o WAVELAN_ROAMING, for the experimental roaming support. * o SET_PSA_CRC, to have your card correctly recognised by * an access point and the Point-to-Point diagnostic tool. * o USE_PSA_CONFIG, to read configuration from the PSA (EEprom) * (otherwise we always start afresh with some defaults) * * wavelan_cs.o is darn too big * ------------------------- * That's true ! There is a very simple way to reduce the driver * object by 33% (yes !). Comment out the following line : * #include * Other compile options can also reduce the size of it... * * MAC address and hardware detection : * ---------------------------------- * The detection code of the wavelan chech that the first 3 * octets of the MAC address fit the company code. This type of * detection work well for AT&T cards (because the AT&T code is * hardcoded in wavelan_cs.h), but of course will fail for other * manufacturer. * * If you are sure that your card is derived from the wavelan, * here is the way to configure it : * 1) Get your MAC address * a) With your card utilities (wfreqsel, instconf, ...) * b) With the driver : * o compile the kernel with DEBUG_CONFIG_INFO enabled * o Boot and look the card messages * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan_cs.h) * 3) Compile & verify * 4) Send me the MAC code - I will include it in the next version... * */ /* --------------------- WIRELESS EXTENSIONS --------------------- */ /* * This driver is the first one to support "wireless extensions". * This set of extensions provide you some way to control the wireless * caracteristics of the hardware in a standard way and support for * applications for taking advantage of it (like Mobile IP). * * It might be a good idea as well to fetch the wireless tools to * configure the device and play a bit. */ /* ---------------------------- FILES ---------------------------- */ /* * wavelan_cs.c : The actual code for the driver - C functions * * wavelan_cs.p.h : Private header : local types / vars for the driver * * wavelan_cs.h : Description of the hardware interface & structs * * i82593.h : Description if the Ethernet controller */ /* --------------------------- HISTORY --------------------------- */ /* * The history of the Wavelan drivers is as complicated as history of * the Wavelan itself (NCR -> AT&T -> Lucent). * * All started with Anders Klemets , * writting a Wavelan ISA driver for the MACH microkernel. Girish * Welling had also worked on it. * Keith Moore modify this for the Pcmcia hardware. * * Robert Morris port these two drivers to BSDI * and add specific Pcmcia support (there is currently no equivalent * of the PCMCIA package under BSD...). * * Jim Binkley port both BSDI drivers to FreeBSD. * * Bruce Janson port the BSDI ISA driver to Linux. * * Anthony D. Joseph started modify Bruce driver * (with help of the BSDI PCMCIA driver) for PCMCIA. * Yunzhou Li finished is work. * Joe Finney patched the driver to start * correctly 2.00 cards (2.4 GHz with frequency selection). * David Hinds integrated the whole in his * Pcmcia package (+ bug corrections). * * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some * patchs to the Pcmcia driver. After, I added code in the ISA driver * for Wireless Extensions and full support of frequency selection * cards. Now, I'm doing the same to the Pcmcia driver + some * reorganisation. * Loeke Brederveld from Lucent has given me * much needed informations on the Wavelan hardware. */ /* By the way : for the copyright & legal stuff : * Almost everybody wrote code under GNU or BSD license (or alike), * and want that their original copyright remain somewhere in the * code (for myself, I go with the GPL). * Nobody want to take responsibility for anything, except the fame... */ /* --------------------------- CREDITS --------------------------- */ /* * Credits: * Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht and * Loeke Brederveld of Lucent for providing extremely useful * information about WaveLAN PCMCIA hardware * * This driver is based upon several other drivers, in particular: * David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter * Bruce Janson's Linux driver for the AT-bus WaveLAN adapter * Anders Klemets' PCMCIA WaveLAN adapter driver * Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter * * Additional Credits: * * This software was originally developed under Linux 1.2.3 * (Slackware 2.0 distribution). * And then under Linux 2.0.x (Debian 1.1 -> 2.2 - pcmcia 2.8.18+) * with an HP OmniBook 4000 and then a 5500. * * It is based on other device drivers and information either written * or supplied by: * James Ashton (jaa101@syseng.anu.edu.au), * Ajay Bakre (bakre@paul.rutgers.edu), * Donald Becker (becker@super.org), * Jim Binkley , * Loeke Brederveld , * Allan Creighton (allanc@cs.su.oz.au), * Brent Elphick , * Joe Finney , * Matthew Geier (matthew@cs.su.oz.au), * Remo di Giovanni (remo@cs.su.oz.au), * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM), * David Hinds , * Jan Hoogendoorn (c/o marteijn@lucent.com), * Bruce Janson , * Anthony D. Joseph , * Anders Klemets (klemets@paul.rutgers.edu), * Yunzhou Li , * Marc Meertens (mmeertens@lucent.com), * Keith Moore, * Robert Morris (rtm@das.harvard.edu), * Ian Parkin (ian@cs.su.oz.au), * John Rosenberg (johnr@cs.su.oz.au), * George Rossi (george@phm.gov.au), * Arthur Scott (arthur@cs.su.oz.au), * Stanislav Sinyagin * Peter Storey, * Jean Tourrilhes , * Girish Welling (welling@paul.rutgers.edu) * Clark Woodworth * Yongguang Zhang ... */ /* ------------------------- IMPROVEMENTS ------------------------- */ /* * I proudly present : * * Changes made in 2.8.22 : * ---------------------- * - improved wv_set_multicast_list * - catch spurious interrupt * - correct release of the device * * Changes mades in release : * ------------------------ * - Reorganisation of the code, function name change * - Creation of private header (wavelan_cs.h) * - Reorganised debug messages * - More comments, history, ... * - Configure earlier (in "insert" instead of "open") * and do things only once * - mmc_init : configure the PSA if not done * - mmc_init : 2.00 detection better code for 2.00 init * - better info at startup * - Correct a HUGE bug (volatile & uncalibrated busy loop) * in wv_82593_cmd => config speedup * - Stop receiving & power down on close (and power up on open) * use "ifconfig down" & "ifconfig up ; route add -net ..." * - Send packets : add watchdog instead of pooling * - Receive : check frame wrap around & try to recover some frames * - wavelan_set_multicast_list : avoid reset * - add wireless extensions (ioctl & get_wireless_stats) * get/set nwid/frequency on fly, info for /proc/net/wireless * - Suppress useless stuff from lp (net_local), but add link * - More inlines * - Lot of others minor details & cleanups * * Changes made in second release : * ------------------------------ * - Optimise wv_85893_reconfig stuff, fix potential problems * - Change error values for ioctl * - Non blocking wv_ru_stop() + call wv_reset() in case of problems * - Remove development printk from wavelan_watchdog() * - Remove of the watchdog to wavelan_close instead of wavelan_release * fix potential problems... * - Start debugging suspend stuff (but it's still a bit weird) * - Debug & optimize dump header/packet in Rx & Tx (debug) * - Use "readb" and "writeb" to be kernel 2.1 compliant * - Better handling of bogus interrupts * - Wireless extension : SETSPY and GETSPY * - Remove old stuff (stats - for those needing it, just ask me...) * - Make wireless extensions optional * * Changes made in third release : * ----------------------------- * - cleanups & typos * - modif wireless ext (spy -> only one pointer) * - new private ioctl to set/get quality & level threshold * - Init : correct default value of level threshold for pcmcia * - kill watchdog in hw_reset * - more 2.1 support (copy_to/from_user instead of memcpy_to/fromfs) * - Add message level (debug stuff in /var/adm/debug & errors not * displayed at console and still in /var/adm/messages) * * Changes made in fourth release : * ------------------------------ * - multicast support (yes !) thanks to Yongguang Zhang. * * Changes made in fifth release (2.9.0) : * ------------------------------------- * - Revisited multicast code (it was mostly wrong). * - protect code in wv_82593_reconfig with dev->tbusy (oups !) * * Changes made in sixth release (2.9.1a) : * -------------------------------------- * - Change the detection code for multi manufacturer code support * - Correct bug (hang kernel) in init when we were "rejecting" a card * * Changes made in seventh release (2.9.1b) : * ---------------------------------------- * - Update to wireless extensions changes * - Silly bug in card initial configuration (psa_conf_status) * * Changes made in eigth release : * ----------------------------- * - Small bug in debug code (probably not the last one...) * - 1.2.13 support (thanks to Clark Woodworth) * * Changes made for release in 2.9.2b : * ---------------------------------- * - Level threshold is now a standard wireless extension (version 4 !) * - modules parameters types for kernel > 2.1.17 * - updated man page * - Others cleanup from David Hinds * * Changes made for release in 2.9.5 : * --------------------------------- * - byte count stats (courtesy of David Hinds) * - Remove dev_tint stuff (courtesy of David Hinds) * - Others cleanup from David Hinds * - Encryption setting from Brent Elphick (thanks a lot !) * - 'base' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin) * * Changes made for release in 2.9.6 : * --------------------------------- * - fix bug : no longuer disable watchdog in case of bogus interrupt * - increase timeout in config code for picky hardware * - mask unused bits in status (Wireless Extensions) * * Changes integrated by Justin Seger & David Hinds : * ----------------------------------------------------------------- * - Roaming "hack" from Joe Finney * - PSA CRC code from Bob Gray * - Better initialisation of the i82593 controller * from Joseph K. O'Sullivan * * Changes made for release in 3.0.10 : * ---------------------------------- * - Fix eject "hang" of the driver under 2.2.X : * o create wv_flush_stale_links() * o Rename wavelan_release to wv_pcmcia_release & move up * o move unregister_netdev to wavelan_detach() * o wavelan_release() no longer call wavelan_detach() * o Suppress "release" timer * o Other cleanups & fixes * - New MAC address in the probe * - Reorg PSA_CRC code (endian neutral & cleaner) * - Correct initialisation of the i82593 from Lucent manual * - Put back the watchdog, with larger timeout * - TRANSMIT_NO_CRC is a "normal" error, so recover from it * from Derrick J Brashear * - Better handling of TX and RX normal failure conditions * - #ifdef out all the roaming code * - Add ESSID & "AP current address" ioctl stubs * - General cleanup of the code * * Changes made for release in 3.0.13 : * ---------------------------------- * - Re-enable compilation of roaming code by default, but with * do_roaming = 0 * - Nuke `nwid=nwid^ntohs(beacon->domain_id)' in wl_roam_gather * at the demand of John Carol Langford * - Introduced WAVELAN_ROAMING_EXT for incomplete ESSID stuff. * * Changes made for release in 3.0.15 : * ---------------------------------- * - Change e-mail and web page addresses * - Watchdog timer is now correctly expressed in HZ, not in jiffies * - Add channel number to the list of frequencies in range * - Add the (short) list of bit-rates in range * - Developp a new sensitivity... (sens.value & sens.fixed) * * Changes made for release in 3.1.2 : * --------------------------------- * - Fix check for root permission (break instead of exit) * - New nwid & encoding setting (Wireless Extension 9) * * Changes made for release in 3.1.12 : * ---------------------------------- * - reworked wv_82593_cmd to avoid using the IRQ handler and doing * ugly things with interrupts. * - Add IRQ protection in 82593_config/ru_start/ru_stop/watchdog * - Update to new network API (softnet - 2.3.43) : * o replace dev->tbusy (David + me) * o replace dev->tstart (David + me) * o remove dev->interrupt (David) * o add SMP locking via spinlock in splxx (me) * o add spinlock in interrupt handler (me) * o use kernel watchdog instead of ours (me) * o verify that all the changes make sense and work (me) * - Re-sync kernel/pcmcia versions (not much actually) * - A few other cleanups (David & me)... * * Changes made for release in 3.1.22 : * ---------------------------------- * - Check that SMP works, remove annoying log message * * Changes made for release in 3.1.24 : * ---------------------------------- * - Fix unfrequent card lockup when watchdog was reseting the hardware : * o control first busy loop in wv_82593_cmd() * o Extend spinlock protection in wv_hw_config() * * Changes made for release in 3.1.33 : * ---------------------------------- * - Optional use new driver API for Wireless Extensions : * o got rid of wavelan_ioctl() * o use a bunch of iw_handler instead * * Changes made for release in 3.2.1 : * --------------------------------- * - Set dev->trans_start to avoid filling the logs * (and generating useless abort commands) * - Avoid deadlocks in mmc_out()/mmc_in() * * Wishes & dreams: * ---------------- * - Cleanup and integrate the roaming code * (std debug, set DomainID, decay avg and co...) */ /***************************** INCLUDES *****************************/ /* Linux headers that we need */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Wireless extensions */ #include /* New driver API */ /* Pcmcia headers that we need */ #include #include #include #include #include /* Wavelan declarations */ #include "i82593.h" /* Definitions for the Intel chip */ #include "wavelan_cs.h" /* Others bits of the hardware */ /************************** DRIVER OPTIONS **************************/ /* * `#define' or `#undef' the following constant to change the behaviour * of the driver... */ #define WAVELAN_ROAMING /* Include experimental roaming code */ #undef WAVELAN_ROAMING_EXT /* Enable roaming wireless extensions */ #undef SET_PSA_CRC /* Set the CRC in PSA (slower) */ #define USE_PSA_CONFIG /* Use info from the PSA */ #undef STRUCT_CHECK /* Verify padding of structures */ #undef EEPROM_IS_PROTECTED /* Doesn't seem to be necessary */ #define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical) */ #undef SET_MAC_ADDRESS /* Experimental */ /* Warning : these stuff will slow down the driver... */ #define WIRELESS_SPY /* Enable spying addresses */ #undef HISTOGRAM /* Enable histogram of sig level... */ /****************************** DEBUG ******************************/ #undef DEBUG_MODULE_TRACE /* Module insertion/removal */ #undef DEBUG_CALLBACK_TRACE /* Calls made by Linux */ #undef DEBUG_INTERRUPT_TRACE /* Calls to handler */ #undef DEBUG_INTERRUPT_INFO /* type of interrupt & so on */ #define DEBUG_INTERRUPT_ERROR /* problems */ #undef DEBUG_CONFIG_TRACE /* Trace the config functions */ #undef DEBUG_CONFIG_INFO /* What's going on... */ #define DEBUG_CONFIG_ERRORS /* Errors on configuration */ #undef DEBUG_TX_TRACE /* Transmission calls */ #undef DEBUG_TX_INFO /* Header of the transmitted packet */ #undef DEBUG_TX_FAIL /* Normal failure conditions */ #define DEBUG_TX_ERROR /* Unexpected conditions */ #undef DEBUG_RX_TRACE /* Transmission calls */ #undef DEBUG_RX_INFO /* Header of the transmitted packet */ #undef DEBUG_RX_FAIL /* Normal failure conditions */ #define DEBUG_RX_ERROR /* Unexpected conditions */ #undef DEBUG_PACKET_DUMP /* Dump packet on the screen */ #undef DEBUG_IOCTL_TRACE /* Misc call by Linux */ #undef DEBUG_IOCTL_INFO /* Various debug info */ #define DEBUG_IOCTL_ERROR /* What's going wrong */ #define DEBUG_BASIC_SHOW /* Show basic startup info */ #undef DEBUG_VERSION_SHOW /* Print version info */ #undef DEBUG_PSA_SHOW /* Dump psa to screen */ #undef DEBUG_MMC_SHOW /* Dump mmc to screen */ #undef DEBUG_SHOW_UNUSED /* Show also unused fields */ #undef DEBUG_I82593_SHOW /* Show i82593 status */ #undef DEBUG_DEVICE_SHOW /* Show device parameters */ /************************ CONSTANTS & MACROS ************************/ #ifdef DEBUG_VERSION_SHOW static const char *version = "wavelan_cs.c : v24 (SMP + wireless extensions) 11/1/02\n"; #endif /* Watchdog temporisation */ #define WATCHDOG_JIFFIES (256*HZ/100) /* Fix a bug in some old wireless extension definitions */ #ifndef IW_ESSID_MAX_SIZE #define IW_ESSID_MAX_SIZE 32 #endif /* ------------------------ PRIVATE IOCTL ------------------------ */ #define SIOCSIPQTHR SIOCIWFIRSTPRIV /* Set quality threshold */ #define SIOCGIPQTHR SIOCIWFIRSTPRIV + 1 /* Get quality threshold */ #define SIOCSIPROAM SIOCIWFIRSTPRIV + 2 /* Set roaming state */ #define SIOCGIPROAM SIOCIWFIRSTPRIV + 3 /* Get roaming state */ #define SIOCSIPHISTO SIOCIWFIRSTPRIV + 4 /* Set histogram ranges */ #define SIOCGIPHISTO SIOCIWFIRSTPRIV + 5 /* Get histogram values */ /*************************** WaveLAN Roaming **************************/ #ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */ #define WAVELAN_ROAMING_DEBUG 0 /* 1 = Trace of handover decisions */ /* 2 = Info on each beacon rcvd... */ #define MAX_WAVEPOINTS 7 /* Max visible at one time */ #define WAVEPOINT_HISTORY 5 /* SNR sample history slow search */ #define WAVEPOINT_FAST_HISTORY 2 /* SNR sample history fast search */ #define SEARCH_THRESH_LOW 10 /* SNR to enter cell search */ #define SEARCH_THRESH_HIGH 13 /* SNR to leave cell search */ #define WAVELAN_ROAMING_DELTA 1 /* Hysteresis value (+/- SNR) */ #define CELL_TIMEOUT 2*HZ /* in jiffies */ #define FAST_CELL_SEARCH 1 /* Boolean values... */ #define NWID_PROMISC 1 /* for code clarity. */ typedef struct wavepoint_beacon { unsigned char dsap, /* Unused */ ssap, /* Unused */ ctrl, /* Unused */ O,U,I, /* Unused */ spec_id1, /* Unused */ spec_id2, /* Unused */ pdu_type, /* Unused */ seq; /* WavePoint beacon sequence number */ unsigned short domain_id, /* WavePoint Domain ID */ nwid; /* WavePoint NWID */ } wavepoint_beacon; typedef struct wavepoint_history { unsigned short nwid; /* WavePoint's NWID */ int average_slow; /* SNR running average */ int average_fast; /* SNR running average */ unsigned char sigqual[WAVEPOINT_HISTORY]; /* Ringbuffer of recent SNR's */ unsigned char qualptr; /* Index into ringbuffer */ unsigned char last_seq; /* Last seq. no seen for WavePoint */ struct wavepoint_history *next; /* Next WavePoint in table */ struct wavepoint_history *prev; /* Previous WavePoint in table */ unsigned long last_seen; /* Time of last beacon recvd, jiffies */ } wavepoint_history; struct wavepoint_table { wavepoint_history *head; /* Start of ringbuffer */ int num_wavepoints; /* No. of WavePoints visible */ unsigned char locked; /* Table lock */ }; #endif /* WAVELAN_ROAMING */ /****************************** TYPES ******************************/ /* Shortcuts */ typedef struct net_device_stats en_stats; typedef struct iw_statistics iw_stats; typedef struct iw_quality iw_qual; typedef struct iw_freq iw_freq; typedef struct net_local net_local; typedef struct timer_list timer_list; /* Basic types */ typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */ /* * Static specific data for the interface. * * For each network interface, Linux keep data in two structure. "device" * keep the generic data (same format for everybody) and "net_local" keep * the additional specific data. * Note that some of this specific data is in fact generic (en_stats, for * example). */ struct net_local { dev_node_t node; /* ???? What is this stuff ???? */ struct net_device * dev; /* Reverse link... */ spinlock_t spinlock; /* Serialize access to the hardware (SMP) */ struct pcmcia_device * link; /* pcmcia structure */ en_stats stats; /* Ethernet interface statistics */ int nresets; /* Number of hw resets */ u_char configured; /* If it is configured */ u_char reconfig_82593; /* Need to reconfigure the controller */ u_char promiscuous; /* Promiscuous mode */ u_char allmulticast; /* All Multicast mode */ int mc_count; /* Number of multicast addresses */ int stop; /* Current i82593 Stop Hit Register */ int rfp; /* Last DMA machine receive pointer */ int overrunning; /* Receiver overrun flag */ iw_stats wstats; /* Wireless specific stats */ struct iw_spy_data spy_data; struct iw_public_data wireless_data; #ifdef HISTOGRAM int his_number; /* Number of intervals */ u_char his_range[16]; /* Boundaries of interval ]n-1; n] */ u_long his_sum[16]; /* Sum in interval */ #endif /* HISTOGRAM */ #ifdef WAVELAN_ROAMING u_long domain_id; /* Domain ID we lock on for roaming */ int filter_domains; /* Check Domain ID of beacon found */ struct wavepoint_table wavepoint_table; /* Table of visible WavePoints*/ wavepoint_history * curr_point; /* Current wavepoint */ int cell_search; /* Searching for new cell? */ struct timer_list cell_timer; /* Garbage collection */ #endif /* WAVELAN_ROAMING */ void __iomem *mem; }; /* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */ static inline u_char /* data */ hasr_read(u_long); /* Read the host interface : base address */ static inline void hacr_write(u_long, /* Write to host interface : base address */ u_char), /* data */ hacr_write_slow(u_long, u_char); static void psa_read(struct net_device *, /* Read the Parameter Storage Area */ int, /* offset in PSA */ u_char *, /* buffer to fill */ int), /* size to read */ psa_write(struct net_device *, /* Write to the PSA */ int, /* Offset in psa */ u_char *, /* Buffer in memory */ int); /* Length of buffer */ static inline void mmc_out(u_long, /* Write 1 byte to the Modem Manag Control */ u_short, u_char), mmc_write(u_long, /* Write n bytes to the MMC */ u_char, u_char *, int); static inline u_char /* Read 1 byte from the MMC */ mmc_in(u_long, u_short); static inline void mmc_read(u_long, /* Read n bytes from the MMC */ u_char, u_char *, int), fee_wait(u_long, /* Wait for frequency EEprom : base address */ int, /* Base delay to wait for */ int); /* Number of time to wait */ static void fee_read(u_long, /* Read the frequency EEprom : base address */ u_short, /* destination offset */ u_short *, /* data buffer */ int); /* number of registers */ /* ---------------------- I82593 SUBROUTINES ----------------------- */ static int wv_82593_cmd(struct net_device *, /* synchronously send a command to i82593 */ char *, int, int); static inline int wv_diag(struct net_device *); /* Diagnostique the i82593 */ static int read_ringbuf(struct net_device *, /* Read a receive buffer */ int, char *, int); static inline void wv_82593_reconfig(struct net_device *); /* Reconfigure the controller */ /* ------------------- DEBUG & INFO SUBROUTINES ------------------- */ static inline void wv_init_info(struct net_device *); /* display startup info */ /* ------------------- IOCTL, STATS & RECONFIG ------------------- */ static en_stats * wavelan_get_stats(struct net_device *); /* Give stats /proc/net/dev */ static iw_stats * wavelan_get_wireless_stats(struct net_device *); /* ----------------------- PACKET RECEPTION ----------------------- */ static inline int wv_start_of_frame(struct net_device *, /* Seek beggining of current frame */ int, /* end of frame */ int); /* start of buffer */ static inline void wv_packet_read(struct net_device *, /* Read a packet from a frame */ int, int), wv_packet_rcv(struct net_device *); /* Read all packets waiting */ /* --------------------- PACKET TRANSMISSION --------------------- */ static inline void wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer */ void *, short); static int wavelan_packet_xmit(struct sk_buff *, /* Send a packet */ struct net_device *); /* -------------------- HARDWARE CONFIGURATION -------------------- */ static inline int wv_mmc_init(struct net_device *); /* Initialize the modem */ static int wv_ru_stop(struct net_device *), /* Stop the i82593 receiver unit */ wv_ru_start(struct net_device *); /* Start the i82593 receiver unit */ static int wv_82593_config(struct net_device *); /* Configure the i82593 */ static inline int wv_pcmcia_reset(struct net_device *); /* Reset the pcmcia interface */ static int wv_hw_config(struct net_device *); /* Reset & configure the whole hardware */ static inline void wv_hw_reset(struct net_device *); /* Same, + start receiver unit */ static inline int wv_pcmcia_config(struct pcmcia_device *); /* Configure the pcmcia interface */ static void wv_pcmcia_release(struct pcmcia_device *);/* Remove a device */ /* ---------------------- INTERRUPT HANDLING ---------------------- */ static irqreturn_t wavelan_interrupt(int, /* Interrupt handler */ void *); static void wavelan_watchdog(struct net_device *); /* Transmission watchdog */ /* ------------------- CONFIGURATION CALLBACKS ------------------- */ static int wavelan_open(struct net_device *), /* Open the device */ wavelan_close(struct net_device *); /* Close the device */ static void wavelan_detach(struct pcmcia_device *p_dev); /* Destroy a removed device */ /**************************** VARIABLES ****************************/ /* * Parameters that can be set with 'insmod' * The exact syntax is 'insmod wavelan_cs.o =' */ /* Shared memory speed, in ns */ static int mem_speed = 0; /* New module interface */ module_param(mem_speed, int, 0); #ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */ /* Enable roaming mode ? No ! Please keep this to 0 */ static int do_roaming = 0; module_param(do_roaming, bool, 0); #endif /* WAVELAN_ROAMING */ MODULE_LICENSE("GPL"); #endif /* WAVELAN_CS_P_H */