From 3e9d84cae5c31b45e6754f9602bf8c711fa3a183 Mon Sep 17 00:00:00 2001 From: Ido Yariv Date: Mon, 2 May 2011 12:42:39 +0800 Subject: wl12xx: Clean up the block size alignment code Simplify and clean up the block size alignment code: 1. Set the block size according to the padding field type, as it cannot exceed the maximum value this field can hold. 2. Move the alignment code into a function instead of duplicating it in multiple places. 3. In the current implementation, the block_size member can be misleading because a zero value actually means that there's no need to align. Declare a block size alignment quirk instead. Signed-off-by: Ido Yariv Signed-off-by: Luciano Coelho --- drivers/net/wireless/wl12xx/init.c | 2 +- drivers/net/wireless/wl12xx/io.c | 3 ++- drivers/net/wireless/wl12xx/main.c | 4 ++-- drivers/net/wireless/wl12xx/sdio.c | 12 ++---------- drivers/net/wireless/wl12xx/tx.c | 26 ++++++++++++++------------ drivers/net/wireless/wl12xx/tx.h | 9 +++++++++ drivers/net/wireless/wl12xx/wl12xx.h | 10 ++++++---- 7 files changed, 36 insertions(+), 30 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c index 2dbc08331ca..cf466074237 100644 --- a/drivers/net/wireless/wl12xx/init.c +++ b/drivers/net/wireless/wl12xx/init.c @@ -514,7 +514,7 @@ int wl1271_chip_specific_init(struct wl1271 *wl) if (wl->chip.id == CHIP_ID_1283_PG20) { u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE; - if (wl1271_set_block_size(wl)) + if (wl->quirks & WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT) /* Enable SDIO padding */ host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK; diff --git a/drivers/net/wireless/wl12xx/io.c b/drivers/net/wireless/wl12xx/io.c index aa40c98e8fd..da5c1ad942a 100644 --- a/drivers/net/wireless/wl12xx/io.c +++ b/drivers/net/wireless/wl12xx/io.c @@ -29,6 +29,7 @@ #include "wl12xx.h" #include "wl12xx_80211.h" #include "io.h" +#include "tx.h" #define OCP_CMD_LOOP 32 @@ -46,7 +47,7 @@ bool wl1271_set_block_size(struct wl1271 *wl) { if (wl->if_ops->set_block_size) { - wl->if_ops->set_block_size(wl); + wl->if_ops->set_block_size(wl, WL12XX_BUS_BLOCK_SIZE); return true; } diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index b4212060178..9ca0f550460 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -1017,6 +1017,8 @@ static int wl1271_chip_wakeup(struct wl1271 *wl) ret = wl1271_setup(wl); if (ret < 0) goto out; + if (wl1271_set_block_size(wl)) + wl->quirks |= WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT; break; case CHIP_ID_1283_PG10: default: @@ -1489,7 +1491,6 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl) memset(wl->ap_hlid_map, 0, sizeof(wl->ap_hlid_map)); wl->ap_fw_ps_map = 0; wl->ap_ps_map = 0; - wl->block_size = 0; /* * this is performed after the cancel_work calls and the associated @@ -3634,7 +3635,6 @@ struct ieee80211_hw *wl1271_alloc_hw(void) wl->ap_ps_map = 0; wl->ap_fw_ps_map = 0; wl->quirks = 0; - wl->block_size = 0; memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map)); for (i = 0; i < ACX_TX_DESCRIPTORS; i++) diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c index 1a7d72a4c96..64c9d0e2c35 100644 --- a/drivers/net/wireless/wl12xx/sdio.c +++ b/drivers/net/wireless/wl12xx/sdio.c @@ -50,15 +50,10 @@ static const struct sdio_device_id wl1271_devices[] = { }; MODULE_DEVICE_TABLE(sdio, wl1271_devices); -/* The max SDIO block size is 256 when working with tx padding to SDIO block */ -#define TX_PAD_SDIO_BLK_SIZE 256 - -static void wl1271_sdio_set_block_size(struct wl1271 *wl) +static void wl1271_sdio_set_block_size(struct wl1271 *wl, unsigned int blksz) { - wl->block_size = TX_PAD_SDIO_BLK_SIZE; - sdio_claim_host(wl->if_priv); - sdio_set_block_size(wl->if_priv, TX_PAD_SDIO_BLK_SIZE); + sdio_set_block_size(wl->if_priv, blksz); sdio_release_host(wl->if_priv); } @@ -177,9 +172,6 @@ static int wl1271_sdio_power_on(struct wl1271 *wl) sdio_claim_host(func); sdio_enable_func(func); - /* Set the default block size in case it was modified */ - sdio_set_block_size(func, 0); - out: return ret; } diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c index 7686bc1ff16..ba69ba7051f 100644 --- a/drivers/net/wireless/wl12xx/tx.c +++ b/drivers/net/wireless/wl12xx/tx.c @@ -149,6 +149,15 @@ u8 wl1271_tx_get_hlid(struct sk_buff *skb) } } +static unsigned int wl12xx_calc_packet_alignment(struct wl1271 *wl, + unsigned int packet_length) +{ + if (wl->quirks & WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT) + return ALIGN(packet_length, WL12XX_BUS_BLOCK_SIZE); + else + return ALIGN(packet_length, WL1271_TX_ALIGN_TO); +} + static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra, u32 buf_offset, u8 hlid) { @@ -174,10 +183,7 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra, /* approximate the number of blocks required for this packet in the firmware */ - if (wl->block_size) - len = ALIGN(total_len, wl->block_size); - else - len = total_len; + len = wl12xx_calc_packet_alignment(wl, total_len); total_blocks = (len + TX_HW_BLOCK_SIZE - 1) / TX_HW_BLOCK_SIZE + spare_blocks; @@ -291,9 +297,9 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb, tx_attr |= rate_idx << TX_HW_ATTR_OFST_RATE_POLICY; desc->reserved = 0; - if (wl->block_size) { - aligned_len = ALIGN(skb->len, wl->block_size); + aligned_len = wl12xx_calc_packet_alignment(wl, skb->len); + if (wl->chip.id == CHIP_ID_1283_PG20) { desc->wl128x_mem.extra_bytes = aligned_len - skb->len; desc->length = cpu_to_le16(aligned_len >> 2); @@ -306,8 +312,7 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb, } else { int pad; - /* align the length (and store in terms of words) */ - aligned_len = ALIGN(skb->len, WL1271_TX_ALIGN_TO); + /* Store the aligned length in terms of words */ desc->length = cpu_to_le16(aligned_len >> 2); /* calculate number of padding bytes */ @@ -386,10 +391,7 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb, * In special cases, we want to align to a specific block size * (eg. for wl128x with SDIO we align to 256). */ - if (wl->block_size) - total_len = ALIGN(skb->len, wl->block_size); - else - total_len = ALIGN(skb->len, WL1271_TX_ALIGN_TO); + total_len = wl12xx_calc_packet_alignment(wl, skb->len); memcpy(wl->aggr_buf + buf_offset, skb->data, skb->len); memset(wl->aggr_buf + buf_offset + skb->len, 0, total_len - skb->len); diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h index a3877ba32d3..d6b05d98062 100644 --- a/drivers/net/wireless/wl12xx/tx.h +++ b/drivers/net/wireless/wl12xx/tx.h @@ -89,6 +89,15 @@ struct wl128x_tx_mem { u8 extra_bytes; } __packed; +/* + * On wl128x based devices, when TX packets are aggregated, each packet + * size must be aligned to the SDIO block size. The maximum block size + * is bounded by the type of the padded bytes field that is sent to the + * FW. Currently the type is u8, so the maximum block size is 256 bytes. + */ +#define WL12XX_BUS_BLOCK_SIZE min(512u, \ + (1u << (8 * sizeof(((struct wl128x_tx_mem *) 0)->extra_bytes)))) + struct wl1271_tx_hw_descr { /* Length of packet in words, including descriptor+header+data */ __le16 length; diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h index f45d3475f07..d04bd8e3470 100644 --- a/drivers/net/wireless/wl12xx/wl12xx.h +++ b/drivers/net/wireless/wl12xx/wl12xx.h @@ -322,7 +322,7 @@ struct wl1271_if_operations { struct device* (*dev)(struct wl1271 *wl); void (*enable_irq)(struct wl1271 *wl); void (*disable_irq)(struct wl1271 *wl); - void (*set_block_size) (struct wl1271 *wl); + void (*set_block_size) (struct wl1271 *wl, unsigned int blksz); }; #define MAX_NUM_KEYS 14 @@ -557,7 +557,6 @@ struct wl1271 { bool ba_support; u8 ba_rx_bitmap; - u32 block_size; int tcxo_clock; /* @@ -609,12 +608,15 @@ int wl1271_plt_stop(struct wl1271 *wl); /* Quirks */ /* Each RX/TX transaction requires an end-of-transaction transfer */ -#define WL12XX_QUIRK_END_OF_TRANSACTION BIT(0) +#define WL12XX_QUIRK_END_OF_TRANSACTION BIT(0) /* * Older firmwares use 2 spare TX blocks * (for STA < 6.1.3.50.58 or for AP < 6.2.0.0.47) */ -#define WL12XX_QUIRK_USE_2_SPARE_BLOCKS BIT(1) +#define WL12XX_QUIRK_USE_2_SPARE_BLOCKS BIT(1) + +/* WL128X requires aggregated packets to be aligned to the SDIO block size */ +#define WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT BIT(2) #endif -- cgit v1.2.3