diff options
Diffstat (limited to 'drivers/net/wireless')
21 files changed, 255 insertions, 347 deletions
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h index 4168b1a807e..0e790efae68 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx.h @@ -352,6 +352,10 @@ #define BCM43xx_UCODEFLAG_UNKPACTRL 0x0040 #define BCM43xx_UCODEFLAG_JAPAN 0x0080 +/* Hardware Radio Enable masks */ +#define BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16) +#define BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4) + /* Generic-Interrupt reasons. */ #define BCM43xx_IRQ_READY (1 << 0) #define BCM43xx_IRQ_BEACON (1 << 1) @@ -758,7 +762,8 @@ struct bcm43xx_private { bad_frames_preempt:1, /* Use "Bad Frames Preemption" (default off) */ reg124_set_0x4:1, /* Some variable to keep track of IRQ stuff. */ short_preamble:1, /* TRUE, if short preamble is enabled. */ - firmware_norelease:1; /* Do not release the firmware. Used on suspend. */ + firmware_norelease:1, /* Do not release the firmware. Used on suspend. */ + radio_hw_enable:1; /* TRUE if radio is hardware enabled */ struct bcm43xx_stats stats; diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c index 7d383a27b92..8f198befba3 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c @@ -26,6 +26,7 @@ */ #include "bcm43xx_leds.h" +#include "bcm43xx_radio.h" #include "bcm43xx.h" #include <asm/bitops.h> @@ -108,6 +109,7 @@ static void bcm43xx_led_init_hardcoded(struct bcm43xx_private *bcm, switch (led_index) { case 0: led->behaviour = BCM43xx_LED_ACTIVITY; + led->activelow = 1; if (bcm->board_vendor == PCI_VENDOR_ID_COMPAQ) led->behaviour = BCM43xx_LED_RADIO_ALL; break; @@ -199,20 +201,21 @@ void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity) turn_on = activity; break; case BCM43xx_LED_RADIO_ALL: - turn_on = radio->enabled; + turn_on = radio->enabled && bcm43xx_is_hw_radio_enabled(bcm); break; case BCM43xx_LED_RADIO_A: case BCM43xx_LED_BCM4303_2: - turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A); + turn_on = (radio->enabled && bcm43xx_is_hw_radio_enabled(bcm) && + phy->type == BCM43xx_PHYTYPE_A); break; case BCM43xx_LED_RADIO_B: case BCM43xx_LED_BCM4303_1: - turn_on = (radio->enabled && + turn_on = (radio->enabled && bcm43xx_is_hw_radio_enabled(bcm) && (phy->type == BCM43xx_PHYTYPE_B || phy->type == BCM43xx_PHYTYPE_G)); break; case BCM43xx_LED_MODE_BG: - if (phy->type == BCM43xx_PHYTYPE_G && + if (phy->type == BCM43xx_PHYTYPE_G && bcm43xx_is_hw_radio_enabled(bcm) && 1/*FIXME: using G rates.*/) turn_on = 1; break; diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index 63fc16f6e58..2e400aacc43 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -2437,6 +2437,9 @@ static int bcm43xx_chip_init(struct bcm43xx_private *bcm) if (err) goto err_gpio_cleanup; bcm43xx_radio_turn_on(bcm); + bcm->radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm); + dprintk(KERN_INFO PFX "Radio %s by hardware\n", + (bcm->radio_hw_enable == 0) ? "disabled" : "enabled"); bcm43xx_write16(bcm, 0x03E6, 0x0000); err = bcm43xx_phy_init(bcm); @@ -3173,9 +3176,24 @@ static void bcm43xx_periodic_every30sec(struct bcm43xx_private *bcm) static void bcm43xx_periodic_every15sec(struct bcm43xx_private *bcm) { + bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning? + //TODO for APHY (temperature?) +} + +static void bcm43xx_periodic_every1sec(struct bcm43xx_private *bcm) +{ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm); + int radio_hw_enable; + /* check if radio hardware enabled status changed */ + radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm); + if (unlikely(bcm->radio_hw_enable != radio_hw_enable)) { + bcm->radio_hw_enable = radio_hw_enable; + dprintk(KERN_INFO PFX "Radio hardware status changed to %s\n", + (radio_hw_enable == 0) ? "disabled" : "enabled"); + bcm43xx_leds_update(bcm, 0); + } if (phy->type == BCM43xx_PHYTYPE_G) { //TODO: update_aci_moving_average if (radio->aci_enable && radio->aci_wlan_automatic) { @@ -3199,21 +3217,21 @@ static void bcm43xx_periodic_every15sec(struct bcm43xx_private *bcm) //TODO: implement rev1 workaround } } - bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning? - //TODO for APHY (temperature?) } static void do_periodic_work(struct bcm43xx_private *bcm) { - if (bcm->periodic_state % 8 == 0) + if (bcm->periodic_state % 120 == 0) bcm43xx_periodic_every120sec(bcm); - if (bcm->periodic_state % 4 == 0) + if (bcm->periodic_state % 60 == 0) bcm43xx_periodic_every60sec(bcm); - if (bcm->periodic_state % 2 == 0) + if (bcm->periodic_state % 30 == 0) bcm43xx_periodic_every30sec(bcm); - bcm43xx_periodic_every15sec(bcm); + if (bcm->periodic_state % 15 == 0) + bcm43xx_periodic_every15sec(bcm); + bcm43xx_periodic_every1sec(bcm); - schedule_delayed_work(&bcm->periodic_work, HZ * 15); + schedule_delayed_work(&bcm->periodic_work, HZ); } static void bcm43xx_periodic_work_handler(struct work_struct *work) @@ -3226,7 +3244,7 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work) unsigned long orig_trans_start = 0; mutex_lock(&bcm->mutex); - if (unlikely(bcm->periodic_state % 4 == 0)) { + if (unlikely(bcm->periodic_state % 60 == 0)) { /* Periodic work will take a long time, so we want it to * be preemtible. */ @@ -3258,7 +3276,7 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work) do_periodic_work(bcm); - if (unlikely(bcm->periodic_state % 4 == 0)) { + if (unlikely(bcm->periodic_state % 60 == 0)) { spin_lock_irqsave(&bcm->irq_lock, flags); tasklet_enable(&bcm->isr_tasklet); bcm43xx_interrupt_enable(bcm, savedirqs); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_radio.c b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c index bb9c484d7e1..af19a07032a 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_radio.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c @@ -1981,6 +1981,7 @@ void bcm43xx_radio_turn_on(struct bcm43xx_private *bcm) } radio->enabled = 1; dprintk(KERN_INFO PFX "Radio turned on\n"); + bcm43xx_leds_update(bcm, 0); } void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm) @@ -2001,6 +2002,7 @@ void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm) bcm43xx_phy_write(bcm, 0x0015, 0xAA00); radio->enabled = 0; dprintk(KERN_INFO PFX "Radio turned off\n"); + bcm43xx_leds_update(bcm, 0); } void bcm43xx_radio_clear_tssi(struct bcm43xx_private *bcm) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_radio.h b/drivers/net/wireless/bcm43xx/bcm43xx_radio.h index 9ed18039fa3..77a98a53a2e 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_radio.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_radio.h @@ -65,6 +65,22 @@ void bcm43xx_radio_init2060(struct bcm43xx_private *bcm); void bcm43xx_radio_turn_on(struct bcm43xx_private *bcm); void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm); +static inline +int bcm43xx_is_hw_radio_enabled(struct bcm43xx_private *bcm) +{ + /* function to return state of hardware enable of radio + * returns 0 if radio disabled, 1 if radio enabled + */ + if (bcm->current_core->rev >= 3) + return ((bcm43xx_read32(bcm, BCM43xx_MMIO_RADIO_HWENABLED_HI) + & BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK) + == 0) ? 1 : 0; + else + return ((bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_HWENABLED_LO) + & BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK) + == 0) ? 0 : 1; +} + int bcm43xx_radio_selectchannel(struct bcm43xx_private *bcm, u8 channel, int synthetic_pu_workaround); diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c index 04c19cefa1d..9077e6edde3 100644 --- a/drivers/net/wireless/hostap/hostap_main.c +++ b/drivers/net/wireless/hostap/hostap_main.c @@ -84,7 +84,7 @@ struct net_device * hostap_add_interface(struct local_info *local, if (strchr(dev->name, '%')) ret = dev_alloc_name(dev, dev->name); - SET_NETDEV_DEV(dev, mdev->class_dev.dev); + SET_NETDEV_DEV(dev, mdev->dev.parent); if (ret >= 0) ret = register_netdevice(dev); diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 22cb3fb7502..c878a2f3239 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -9166,7 +9166,7 @@ static int ipw_wx_set_rts(struct net_device *dev, { struct ipw_priv *priv = ieee80211_priv(dev); mutex_lock(&priv->mutex); - if (wrqu->rts.disabled) + if (wrqu->rts.disabled || !wrqu->rts.fixed) priv->rts_threshold = DEFAULT_RTS_THRESHOLD; else { if (wrqu->rts.value < MIN_RTS_THRESHOLD || @@ -9255,7 +9255,7 @@ static int ipw_wx_set_frag(struct net_device *dev, { struct ipw_priv *priv = ieee80211_priv(dev); mutex_lock(&priv->mutex); - if (wrqu->frag.disabled) + if (wrqu->frag.disabled || !wrqu->frag.fixed) priv->ieee->fts = DEFAULT_FTS; else { if (wrqu->frag.value < MIN_FRAG_THRESHOLD || diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 936c888e03e..4e7f6cf5143 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -2059,7 +2059,7 @@ static int determine_firmware(struct net_device *dev) int err; struct comp_id nic_id, sta_id; unsigned int firmver; - char tmp[SYMBOL_MAX_VER_LEN+1]; + char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2))); /* Get the hardware version */ err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); @@ -4293,8 +4293,8 @@ static void orinoco_get_drvinfo(struct net_device *dev, strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1); strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1); strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1); - if (dev->class_dev.dev) - strncpy(info->bus_info, dev->class_dev.dev->bus_id, + if (dev->dev.parent) + strncpy(info->bus_info, dev->dev.parent->bus_id, sizeof(info->bus_info) - 1); else snprintf(info->bus_info, sizeof(info->bus_info) - 1, diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index d08ae8d2726..d1e502236b2 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -332,7 +332,7 @@ orinoco_cs_config(struct pcmcia_device *link) /* Finally, report what we've done */ printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " - "0x%04x-0x%04x\n", dev->name, dev->class_dev.dev->bus_id, + "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id, link->irq.AssignedIRQ, link->io.BasePort1, link->io.BasePort1 + link->io.NumPorts1 - 1); diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index f057fd9fcd7..a037b11dac9 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -21,6 +21,7 @@ #include <linux/module.h> #include <linux/netdevice.h> +#include <linux/ethtool.h> #include <linux/pci.h> #include <linux/etherdevice.h> #include <linux/delay.h> @@ -787,6 +788,17 @@ islpci_set_multicast_list(struct net_device *dev) } #endif +static void islpci_ethtool_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); +} + +static struct ethtool_ops islpci_ethtool_ops = { + .get_drvinfo = islpci_ethtool_get_drvinfo, +}; + struct net_device * islpci_setup(struct pci_dev *pdev) { @@ -813,6 +825,7 @@ islpci_setup(struct pci_dev *pdev) ndev->do_ioctl = &prism54_ioctl; ndev->wireless_handlers = (struct iw_handler_def *) &prism54_handler_def; + ndev->ethtool_ops = &islpci_ethtool_ops; ndev->hard_start_xmit = &islpci_eth_transmit; /* ndev->set_multicast_list = &islpci_set_multicast_list; */ diff --git a/drivers/net/wireless/prism54/islpci_dev.h b/drivers/net/wireless/prism54/islpci_dev.h index a9aa1662eaa..736666da6c2 100644 --- a/drivers/net/wireless/prism54/islpci_dev.h +++ b/drivers/net/wireless/prism54/islpci_dev.h @@ -211,4 +211,8 @@ islpci_trigger(islpci_private *priv) int islpci_free_memory(islpci_private *); struct net_device *islpci_setup(struct pci_dev *); + +#define DRV_NAME "prism54" +#define DRV_VERSION "1.2" + #endif /* _ISLPCI_DEV_H */ diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c index 58257b40c04..3dcb13bb7d5 100644 --- a/drivers/net/wireless/prism54/islpci_hotplug.c +++ b/drivers/net/wireless/prism54/islpci_hotplug.c @@ -28,9 +28,6 @@ #include "islpci_mgt.h" /* for pc_debug */ #include "isl_oid.h" -#define DRV_NAME "prism54" -#define DRV_VERSION "1.2" - MODULE_AUTHOR("[Intersil] R.Bastings and W.Termorshuizen, The prism54.org Development Team <prism54-devel@prism54.org>"); MODULE_DESCRIPTION("The Prism54 802.11 Wireless LAN adapter"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index cf2d1486b01..af70460f008 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -806,7 +806,7 @@ spectrum_cs_config(struct pcmcia_device *link) /* Finally, report what we've done */ printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " - "0x%04x-0x%04x\n", dev->name, dev->class_dev.dev->bus_id, + "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id, link->irq.AssignedIRQ, link->io.BasePort1, link->io.BasePort1 + link->io.NumPorts1 - 1); diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index 78ea72fb8f0..12dfc0b6efe 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -84,6 +84,18 @@ static void print_id(struct zd_chip *chip) dev_info(zd_chip_dev(chip), "%s\n", buffer); } +static zd_addr_t inc_addr(zd_addr_t addr) +{ + u16 a = (u16)addr; + /* Control registers use byte addressing, but everything else uses word + * addressing. */ + if ((a & 0xf000) == CR_START) + a += 2; + else + a += 1; + return (zd_addr_t)a; +} + /* Read a variable number of 32-bit values. Parameter count is not allowed to * exceed USB_MAX_IOREAD32_COUNT. */ @@ -114,7 +126,7 @@ int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, const zd_addr_t *addr for (i = 0; i < count; i++) { int j = 2*i; /* We read the high word always first. */ - a16[j] = zd_inc_word(addr[i]); + a16[j] = inc_addr(addr[i]); a16[j+1] = addr[i]; } @@ -163,7 +175,7 @@ int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, j = 2*i; /* We write the high word always first. */ ioreqs16[j].value = ioreqs[i].value >> 16; - ioreqs16[j].addr = zd_inc_word(ioreqs[i].addr); + ioreqs16[j].addr = inc_addr(ioreqs[i].addr); ioreqs16[j+1].value = ioreqs[i].value; ioreqs16[j+1].addr = ioreqs[i].addr; } @@ -466,7 +478,8 @@ static int read_values(struct zd_chip *chip, u8 *values, size_t count, ZD_ASSERT(mutex_is_locked(&chip->mutex)); for (i = 0;;) { - r = zd_ioread32_locked(chip, &v, e2p_addr+i/2); + r = zd_ioread32_locked(chip, &v, + (zd_addr_t)((u16)e2p_addr+i/2)); if (r) return r; v -= guard; @@ -798,47 +811,18 @@ static int hw_reset_phy(struct zd_chip *chip) static int zd1211_hw_init_hmac(struct zd_chip *chip) { static const struct zd_ioreq32 ioreqs[] = { - { CR_ACK_TIMEOUT_EXT, 0x20 }, - { CR_ADDA_MBIAS_WARMTIME, 0x30000808 }, { CR_ZD1211_RETRY_MAX, 0x2 }, - { CR_SNIFFER_ON, 0 }, - { CR_RX_FILTER, STA_RX_FILTER }, - { CR_GROUP_HASH_P1, 0x00 }, - { CR_GROUP_HASH_P2, 0x80000000 }, - { CR_REG1, 0xa4 }, - { CR_ADDA_PWR_DWN, 0x7f }, - { CR_BCN_PLCP_CFG, 0x00f00401 }, - { CR_PHY_DELAY, 0x00 }, - { CR_ACK_TIMEOUT_EXT, 0x80 }, - { CR_ADDA_PWR_DWN, 0x00 }, - { CR_ACK_TIME_80211, 0x100 }, - { CR_RX_PE_DELAY, 0x70 }, - { CR_PS_CTRL, 0x10000000 }, - { CR_RTS_CTS_RATE, 0x02030203 }, { CR_RX_THRESHOLD, 0x000c0640 }, - { CR_AFTER_PNP, 0x1 }, - { CR_WEP_PROTECT, 0x114 }, }; - int r; - dev_dbg_f(zd_chip_dev(chip), "\n"); ZD_ASSERT(mutex_is_locked(&chip->mutex)); - r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); -#ifdef DEBUG - if (r) { - dev_err(zd_chip_dev(chip), - "error in zd_iowrite32a_locked. Error number %d\n", r); - } -#endif /* DEBUG */ - return r; + return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); } static int zd1211b_hw_init_hmac(struct zd_chip *chip) { static const struct zd_ioreq32 ioreqs[] = { - { CR_ACK_TIMEOUT_EXT, 0x20 }, - { CR_ADDA_MBIAS_WARMTIME, 0x30000808 }, { CR_ZD1211B_RETRY_MAX, 0x02020202 }, { CR_ZD1211B_TX_PWR_CTL4, 0x007f003f }, { CR_ZD1211B_TX_PWR_CTL3, 0x007f003f }, @@ -847,6 +831,20 @@ static int zd1211b_hw_init_hmac(struct zd_chip *chip) { CR_ZD1211B_AIFS_CTL1, 0x00280028 }, { CR_ZD1211B_AIFS_CTL2, 0x008C003C }, { CR_ZD1211B_TXOP, 0x01800824 }, + { CR_RX_THRESHOLD, 0x000c0eff, }, + }; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int hw_init_hmac(struct zd_chip *chip) +{ + int r; + static const struct zd_ioreq32 ioreqs[] = { + { CR_ACK_TIMEOUT_EXT, 0x20 }, + { CR_ADDA_MBIAS_WARMTIME, 0x30000808 }, { CR_SNIFFER_ON, 0 }, { CR_RX_FILTER, STA_RX_FILTER }, { CR_GROUP_HASH_P1, 0x00 }, @@ -861,25 +859,16 @@ static int zd1211b_hw_init_hmac(struct zd_chip *chip) { CR_RX_PE_DELAY, 0x70 }, { CR_PS_CTRL, 0x10000000 }, { CR_RTS_CTS_RATE, 0x02030203 }, - { CR_RX_THRESHOLD, 0x000c0eff, }, { CR_AFTER_PNP, 0x1 }, { CR_WEP_PROTECT, 0x114 }, + { CR_IFS_VALUE, IFS_VALUE_DEFAULT }, }; - int r; - - dev_dbg_f(zd_chip_dev(chip), "\n"); ZD_ASSERT(mutex_is_locked(&chip->mutex)); r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); - if (r) { - dev_dbg_f(zd_chip_dev(chip), - "error in zd_iowrite32a_locked. Error number %d\n", r); - } - return r; -} + if (r) + return r; -static int hw_init_hmac(struct zd_chip *chip) -{ return chip->is_zd1211b ? zd1211b_hw_init_hmac(chip) : zd1211_hw_init_hmac(chip); } @@ -974,16 +963,14 @@ static int hw_init(struct zd_chip *chip) if (r) return r; - /* Although the vendor driver defaults to a different value during - * init, it overwrites the IFS value with the following every time - * the channel changes. We should aim to be more intelligent... */ - r = zd_iowrite32_locked(chip, IFS_VALUE_DEFAULT, CR_IFS_VALUE); - if (r) - return r; - return set_beacon_interval(chip, 100); } +static zd_addr_t fw_reg_addr(struct zd_chip *chip, u16 offset) +{ + return (zd_addr_t)((u16)chip->fw_regs_base + offset); +} + #ifdef DEBUG static int dump_cr(struct zd_chip *chip, const zd_addr_t addr, const char *addr_string) @@ -1018,9 +1005,11 @@ static int test_init(struct zd_chip *chip) static void dump_fw_registers(struct zd_chip *chip) { - static const zd_addr_t addr[4] = { - FW_FIRMWARE_VER, FW_USB_SPEED, FW_FIX_TX_RATE, - FW_LINK_STATUS + const zd_addr_t addr[4] = { + fw_reg_addr(chip, FW_REG_FIRMWARE_VER), + fw_reg_addr(chip, FW_REG_USB_SPEED), + fw_reg_addr(chip, FW_REG_FIX_TX_RATE), + fw_reg_addr(chip, FW_REG_LED_LINK_STATUS), }; int r; @@ -1046,7 +1035,8 @@ static int print_fw_version(struct zd_chip *chip) int r; u16 version; - r = zd_ioread16_locked(chip, &version, FW_FIRMWARE_VER); + r = zd_ioread16_locked(chip, &version, + fw_reg_addr(chip, FW_REG_FIRMWARE_VER)); if (r) return r; @@ -1126,6 +1116,22 @@ int zd_chip_disable_hwint(struct zd_chip *chip) return r; } +static int read_fw_regs_offset(struct zd_chip *chip) +{ + int r; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread16_locked(chip, (u16*)&chip->fw_regs_base, + FWRAW_REGS_ADDR); + if (r) + return r; + dev_dbg_f(zd_chip_dev(chip), "fw_regs_base: %#06hx\n", + (u16)chip->fw_regs_base); + + return 0; +} + + int zd_chip_init_hw(struct zd_chip *chip, u8 device_type) { int r; @@ -1145,7 +1151,7 @@ int zd_chip_init_hw(struct zd_chip *chip, u8 device_type) if (r) goto out; - r = zd_usb_init_hw(&chip->usb); + r = read_fw_regs_offset(chip); if (r) goto out; @@ -1325,15 +1331,15 @@ u8 zd_chip_get_channel(struct zd_chip *chip) int zd_chip_control_leds(struct zd_chip *chip, enum led_status status) { - static const zd_addr_t a[] = { - FW_LINK_STATUS, + const zd_addr_t a[] = { + fw_reg_addr(chip, FW_REG_LED_LINK_STATUS), CR_LED, }; int r; u16 v[ARRAY_SIZE(a)]; struct zd_ioreq16 ioreqs[ARRAY_SIZE(a)] = { - [0] = { FW_LINK_STATUS }, + [0] = { fw_reg_addr(chip, FW_REG_LED_LINK_STATUS) }, [1] = { CR_LED }, }; u16 other_led; diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index a4e3cee9b59..b07569e391e 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -18,7 +18,6 @@ #ifndef _ZD_CHIP_H #define _ZD_CHIP_H -#include "zd_types.h" #include "zd_rf.h" #include "zd_usb.h" @@ -27,6 +26,37 @@ * adds a processor for handling the USB protocol. */ +/* Address space */ +enum { + /* CONTROL REGISTERS */ + CR_START = 0x9000, + + + /* FIRMWARE */ + FW_START = 0xee00, + + + /* EEPROM */ + E2P_START = 0xf800, + E2P_LEN = 0x800, + + /* EEPROM layout */ + E2P_LOAD_CODE_LEN = 0xe, /* base 0xf800 */ + E2P_LOAD_VECT_LEN = 0x9, /* base 0xf80e */ + /* E2P_DATA indexes into this */ + E2P_DATA_LEN = 0x7e, /* base 0xf817 */ + E2P_BOOT_CODE_LEN = 0x760, /* base 0xf895 */ + E2P_INTR_VECT_LEN = 0xb, /* base 0xfff5 */ + + /* Some precomputed offsets into the EEPROM */ + E2P_DATA_OFFSET = E2P_LOAD_CODE_LEN + E2P_LOAD_VECT_LEN, + E2P_BOOT_CODE_OFFSET = E2P_DATA_OFFSET + E2P_DATA_LEN, +}; + +#define CTL_REG(offset) ((zd_addr_t)(CR_START + (offset))) +#define E2P_DATA(offset) ((zd_addr_t)(E2P_START + E2P_DATA_OFFSET + (offset))) +#define FWRAW_DATA(offset) ((zd_addr_t)(FW_START + (offset))) + /* 8-bit hardware registers */ #define CR0 CTL_REG(0x0000) #define CR1 CTL_REG(0x0004) @@ -302,7 +332,7 @@ #define CR_MAX_PHY_REG 255 -/* Taken from the ZYDAS driver, not all of them are relevant for the ZSD1211 +/* Taken from the ZYDAS driver, not all of them are relevant for the ZD1211 * driver. */ @@ -594,81 +624,71 @@ /* * Upper 16 bit contains the regulatory domain. */ -#define E2P_SUBID E2P_REG(0x00) -#define E2P_POD E2P_REG(0x02) -#define E2P_MAC_ADDR_P1 E2P_REG(0x04) -#define E2P_MAC_ADDR_P2 E2P_REG(0x06) -#define E2P_PWR_CAL_VALUE1 E2P_REG(0x08) -#define E2P_PWR_CAL_VALUE2 E2P_REG(0x0a) -#define E2P_PWR_CAL_VALUE3 E2P_REG(0x0c) -#define E2P_PWR_CAL_VALUE4 E2P_REG(0x0e) -#define E2P_PWR_INT_VALUE1 E2P_REG(0x10) -#define E2P_PWR_INT_VALUE2 E2P_REG(0x12) -#define E2P_PWR_INT_VALUE3 E2P_REG(0x14) -#define E2P_PWR_INT_VALUE4 E2P_REG(0x16) +#define E2P_SUBID E2P_DATA(0x00) +#define E2P_POD E2P_DATA(0x02) +#define E2P_MAC_ADDR_P1 E2P_DATA(0x04) +#define E2P_MAC_ADDR_P2 E2P_DATA(0x06) +#define E2P_PWR_CAL_VALUE1 E2P_DATA(0x08) +#define E2P_PWR_CAL_VALUE2 E2P_DATA(0x0a) +#define E2P_PWR_CAL_VALUE3 E2P_DATA(0x0c) +#define E2P_PWR_CAL_VALUE4 E2P_DATA(0x0e) +#define E2P_PWR_INT_VALUE1 E2P_DATA(0x10) +#define E2P_PWR_INT_VALUE2 E2P_DATA(0x12) +#define E2P_PWR_INT_VALUE3 E2P_DATA(0x14) +#define E2P_PWR_INT_VALUE4 E2P_DATA(0x16) /* Contains a bit for each allowed channel. It gives for Europe (ETSI 0x30) * also only 11 channels. */ -#define E2P_ALLOWED_CHANNEL E2P_REG(0x18) - -#define E2P_PHY_REG E2P_REG(0x1a) -#define E2P_DEVICE_VER E2P_REG(0x20) -#define E2P_36M_CAL_VALUE1 E2P_REG(0x28) -#define E2P_36M_CAL_VALUE2 E2P_REG(0x2a) -#define E2P_36M_CAL_VALUE3 E2P_REG(0x2c) -#define E2P_36M_CAL_VALUE4 E2P_REG(0x2e) -#define E2P_11A_INT_VALUE1 E2P_REG(0x30) -#define E2P_11A_INT_VALUE2 E2P_REG(0x32) -#define E2P_11A_INT_VALUE3 E2P_REG(0x34) -#define E2P_11A_INT_VALUE4 E2P_REG(0x36) -#define E2P_48M_CAL_VALUE1 E2P_REG(0x38) -#define E2P_48M_CAL_VALUE2 E2P_REG(0x3a) -#define E2P_48M_CAL_VALUE3 E2P_REG(0x3c) -#define E2P_48M_CAL_VALUE4 E2P_REG(0x3e) -#define E2P_48M_INT_VALUE1 E2P_REG(0x40) -#define E2P_48M_INT_VALUE2 E2P_REG(0x42) -#define E2P_48M_INT_VALUE3 E2P_REG(0x44) -#define E2P_48M_INT_VALUE4 E2P_REG(0x46) -#define E2P_54M_CAL_VALUE1 E2P_REG(0x48) /* ??? */ -#define E2P_54M_CAL_VALUE2 E2P_REG(0x4a) -#define E2P_54M_CAL_VALUE3 E2P_REG(0x4c) -#define E2P_54M_CAL_VALUE4 E2P_REG(0x4e) -#define E2P_54M_INT_VALUE1 E2P_REG(0x50) -#define E2P_54M_INT_VALUE2 E2P_REG(0x52) -#define E2P_54M_INT_VALUE3 E2P_REG(0x54) -#define E2P_54M_INT_VALUE4 E2P_REG(0x56) - -/* All 16 bit values */ -#define FW_FIRMWARE_VER FW_REG(0) -/* non-zero if USB high speed connection */ -#define FW_USB_SPEED FW_REG(1) -#define FW_FIX_TX_RATE FW_REG(2) -/* Seems to be able to control LEDs over the firmware */ -#define FW_LINK_STATUS FW_REG(3) -#define FW_SOFT_RESET FW_REG(4) -#define FW_FLASH_CHK FW_REG(5) +#define E2P_ALLOWED_CHANNEL E2P_DATA(0x18) + +#define E2P_PHY_REG E2P_DATA(0x1a) +#define E2P_DEVICE_VER E2P_DATA(0x20) +#define E2P_36M_CAL_VALUE1 E2P_DATA(0x28) +#define E2P_36M_CAL_VALUE2 E2P_DATA(0x2a) +#define E2P_36M_CAL_VALUE3 E2P_DATA(0x2c) +#define E2P_36M_CAL_VALUE4 E2P_DATA(0x2e) +#define E2P_11A_INT_VALUE1 E2P_DATA(0x30) +#define E2P_11A_INT_VALUE2 E2P_DATA(0x32) +#define E2P_11A_INT_VALUE3 E2P_DATA(0x34) +#define E2P_11A_INT_VALUE4 E2P_DATA(0x36) +#define E2P_48M_CAL_VALUE1 E2P_DATA(0x38) +#define E2P_48M_CAL_VALUE2 E2P_DATA(0x3a) +#define E2P_48M_CAL_VALUE3 E2P_DATA(0x3c) +#define E2P_48M_CAL_VALUE4 E2P_DATA(0x3e) +#define E2P_48M_INT_VALUE1 E2P_DATA(0x40) +#define E2P_48M_INT_VALUE2 E2P_DATA(0x42) +#define E2P_48M_INT_VALUE3 E2P_DATA(0x44) +#define E2P_48M_INT_VALUE4 E2P_DATA(0x46) +#define E2P_54M_CAL_VALUE1 E2P_DATA(0x48) /* ??? */ +#define E2P_54M_CAL_VALUE2 E2P_DATA(0x4a) +#define E2P_54M_CAL_VALUE3 E2P_DATA(0x4c) +#define E2P_54M_CAL_VALUE4 E2P_DATA(0x4e) +#define E2P_54M_INT_VALUE1 E2P_DATA(0x50) +#define E2P_54M_INT_VALUE2 E2P_DATA(0x52) +#define E2P_54M_INT_VALUE3 E2P_DATA(0x54) +#define E2P_54M_INT_VALUE4 E2P_DATA(0x56) + +/* This word contains the base address of the FW_REG_ registers below */ +#define FWRAW_REGS_ADDR FWRAW_DATA(0x1d) + +/* All 16 bit values, offset from the address in FWRAW_REGS_ADDR */ +enum { + FW_REG_FIRMWARE_VER = 0, + /* non-zero if USB high speed connection */ + FW_REG_USB_SPEED = 1, + FW_REG_FIX_TX_RATE = 2, + /* Seems to be able to control LEDs over the firmware */ + FW_REG_LED_LINK_STATUS = 3, + FW_REG_SOFT_RESET = 4, + FW_REG_FLASH_CHK = 5, +}; +/* Values for FW_LINK_STATUS */ #define FW_LINK_OFF 0x0 #define FW_LINK_TX 0x1 /* 0x2 - link led on? */ enum { - CR_BASE_OFFSET = 0x9000, - FW_START_OFFSET = 0xee00, - FW_BASE_ADDR_OFFSET = FW_START_OFFSET + 0x1d, - EEPROM_START_OFFSET = 0xf800, - EEPROM_SIZE = 0x800, /* words */ - LOAD_CODE_SIZE = 0xe, /* words */ - LOAD_VECT_SIZE = 0x10000 - 0xfff7, /* words */ - EEPROM_REGS_OFFSET = LOAD_CODE_SIZE + LOAD_VECT_SIZE, - EEPROM_REGS_SIZE = 0x7e, /* words */ - E2P_BASE_OFFSET = EEPROM_START_OFFSET + - EEPROM_REGS_OFFSET, -}; - -#define FW_REG_TABLE_ADDR USB_ADDR(FW_START_OFFSET + 0x1d) - -enum { /* indices for ofdm_cal_values */ OFDM_36M_INDEX = 0, OFDM_48M_INDEX = 1, @@ -679,6 +699,8 @@ struct zd_chip { struct zd_usb usb; struct zd_rf rf; struct mutex mutex; + /* Base address of FW_REG_ registers */ + zd_addr_t fw_regs_base; u8 e2p_mac[ETH_ALEN]; /* EepSetPoint in the vendor driver */ u8 pwr_cal_values[E2P_CHANNEL_COUNT]; diff --git a/drivers/net/wireless/zd1211rw/zd_def.h b/drivers/net/wireless/zd1211rw/zd_def.h index fb22f62cf1f..deb99d1eaa7 100644 --- a/drivers/net/wireless/zd1211rw/zd_def.h +++ b/drivers/net/wireless/zd1211rw/zd_def.h @@ -23,6 +23,8 @@ #include <linux/device.h> #include <linux/kernel.h> +typedef u16 __nocast zd_addr_t; + #define dev_printk_f(level, dev, fmt, args...) \ dev_printk(level, dev, "%s() " fmt, __func__, ##args) diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.h b/drivers/net/wireless/zd1211rw/zd_ieee80211.h index 26b8298dff8..c4f36d39642 100644 --- a/drivers/net/wireless/zd1211rw/zd_ieee80211.h +++ b/drivers/net/wireless/zd1211rw/zd_ieee80211.h @@ -2,7 +2,6 @@ #define _ZD_IEEE80211_H #include <net/ieee80211.h> -#include "zd_types.h" /* Additional definitions from the standards. */ diff --git a/drivers/net/wireless/zd1211rw/zd_rf.h b/drivers/net/wireless/zd1211rw/zd_rf.h index 676b3734f1e..a57732eb69e 100644 --- a/drivers/net/wireless/zd1211rw/zd_rf.h +++ b/drivers/net/wireless/zd1211rw/zd_rf.h @@ -18,8 +18,6 @@ #ifndef _ZD_RF_H #define _ZD_RF_H -#include "zd_types.h" - #define UW2451_RF 0x2 #define UCHIP_RF 0x3 #define AL2230_RF 0x4 diff --git a/drivers/net/wireless/zd1211rw/zd_types.h b/drivers/net/wireless/zd1211rw/zd_types.h deleted file mode 100644 index 0155a1584ed..00000000000 --- a/drivers/net/wireless/zd1211rw/zd_types.h +++ /dev/null @@ -1,71 +0,0 @@ -/* zd_types.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ZD_TYPES_H -#define _ZD_TYPES_H - -#include <linux/types.h> - -/* We have three register spaces mapped into the overall USB address space of - * 64K words (16-bit values). There is the control register space of - * double-word registers, the eeprom register space and the firmware register - * space. The control register space is byte mapped, the others are word - * mapped. - * - * For that reason, we are using byte offsets for control registers and word - * offsets for everything else. - */ - -typedef u32 __nocast zd_addr_t; - -enum { - ADDR_BASE_MASK = 0xff000000, - ADDR_OFFSET_MASK = 0x0000ffff, - ADDR_ZERO_MASK = 0x00ff0000, - NULL_BASE = 0x00000000, - USB_BASE = 0x01000000, - CR_BASE = 0x02000000, - CR_MAX_OFFSET = 0x0b30, - E2P_BASE = 0x03000000, - E2P_MAX_OFFSET = 0x007e, - FW_BASE = 0x04000000, - FW_MAX_OFFSET = 0x0005, -}; - -#define ZD_ADDR_BASE(addr) ((u32)(addr) & ADDR_BASE_MASK) -#define ZD_OFFSET(addr) ((u32)(addr) & ADDR_OFFSET_MASK) - -#define ZD_ADDR(base, offset) \ - ((zd_addr_t)(((base) & ADDR_BASE_MASK) | ((offset) & ADDR_OFFSET_MASK))) - -#define ZD_NULL_ADDR ((zd_addr_t)0) -#define USB_REG(offset) ZD_ADDR(USB_BASE, offset) /* word addressing */ -#define CTL_REG(offset) ZD_ADDR(CR_BASE, offset) /* byte addressing */ -#define E2P_REG(offset) ZD_ADDR(E2P_BASE, offset) /* word addressing */ -#define FW_REG(offset) ZD_ADDR(FW_BASE, offset) /* word addressing */ - -static inline zd_addr_t zd_inc_word(zd_addr_t addr) -{ - u32 base = ZD_ADDR_BASE(addr); - u32 offset = ZD_OFFSET(addr); - - offset += base == CR_BASE ? 2 : 1; - - return base | offset; -} - -#endif /* _ZD_TYPES_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index a3217a8d37c..aac8a1c5ba0 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -58,6 +58,10 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0586, 0x340f), .driver_info = DEVICE_ZD1211B }, /* "Driverless" devices that need ejecting */ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, {} @@ -73,96 +77,6 @@ MODULE_DEVICE_TABLE(usb, usb_ids); #define FW_ZD1211_PREFIX "zd1211/zd1211_" #define FW_ZD1211B_PREFIX "zd1211/zd1211b_" -/* register address handling */ - -#ifdef DEBUG -static int check_addr(struct zd_usb *usb, zd_addr_t addr) -{ - u32 base = ZD_ADDR_BASE(addr); - u32 offset = ZD_OFFSET(addr); - - if ((u32)addr & ADDR_ZERO_MASK) - goto invalid_address; - switch (base) { - case USB_BASE: - break; - case CR_BASE: - if (offset > CR_MAX_OFFSET) { - dev_dbg(zd_usb_dev(usb), - "CR offset %#010x larger than" - " CR_MAX_OFFSET %#10x\n", - offset, CR_MAX_OFFSET); - goto invalid_address; - } - if (offset & 1) { - dev_dbg(zd_usb_dev(usb), - "CR offset %#010x is not a multiple of 2\n", - offset); - goto invalid_address; - } - break; - case E2P_BASE: - if (offset > E2P_MAX_OFFSET) { - dev_dbg(zd_usb_dev(usb), - "E2P offset %#010x larger than" - " E2P_MAX_OFFSET %#010x\n", - offset, E2P_MAX_OFFSET); - goto invalid_address; - } - break; - case FW_BASE: - if (!usb->fw_base_offset) { - dev_dbg(zd_usb_dev(usb), - "ERROR: fw base offset has not been set\n"); - return -EAGAIN; - } - if (offset > FW_MAX_OFFSET) { - dev_dbg(zd_usb_dev(usb), - "FW offset %#10x is larger than" - " FW_MAX_OFFSET %#010x\n", - offset, FW_MAX_OFFSET); - goto invalid_address; - } - break; - default: - dev_dbg(zd_usb_dev(usb), - "address has unsupported base %#010x\n", addr); - goto invalid_address; - } - - return 0; -invalid_address: - dev_dbg(zd_usb_dev(usb), - "ERROR: invalid address: %#010x\n", addr); - return -EINVAL; -} -#endif /* DEBUG */ - -static u16 usb_addr(struct zd_usb *usb, zd_addr_t addr) -{ - u32 base; - u16 offset; - - base = ZD_ADDR_BASE(addr); - offset = ZD_OFFSET(addr); - - ZD_ASSERT(check_addr(usb, addr) == 0); - - switch (base) { - case CR_BASE: - offset += CR_BASE_OFFSET; - break; - case E2P_BASE: - offset += E2P_BASE_OFFSET; - break; - case FW_BASE: - offset += usb->fw_base_offset; - break; - } - - return offset; -} - /* USB device initialization */ static int request_fw_file( @@ -295,14 +209,13 @@ static int handle_version_mismatch(struct usb_device *udev, u8 device_type, if (r) goto error; - r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START_OFFSET, - REBOOT); + r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START, REBOOT); if (r) goto error; - offset = ((EEPROM_REGS_OFFSET + EEPROM_REGS_SIZE) * sizeof(u16)); + offset = (E2P_BOOT_CODE_OFFSET * sizeof(u16)); r = upload_code(udev, ub_fw->data + offset, ub_fw->size - offset, - E2P_BASE_OFFSET + EEPROM_REGS_SIZE, REBOOT); + E2P_START + E2P_BOOT_CODE_OFFSET, REBOOT); /* At this point, the vendor driver downloads the whole firmware * image, hacks around with version IDs, and uploads it again, @@ -331,7 +244,7 @@ static int upload_firmware(struct usb_device *udev, u8 device_type) if (r) goto error; - fw_bcdDevice = get_word(ub_fw->data, EEPROM_REGS_OFFSET); + fw_bcdDevice = get_word(ub_fw->data, E2P_DATA_OFFSET); if (fw_bcdDevice != bcdDevice) { dev_info(&udev->dev, @@ -357,8 +270,7 @@ static int upload_firmware(struct usb_device *udev, u8 device_type) if (r) goto error; - r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START_OFFSET, - REBOOT); + r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START, REBOOT); if (r) { dev_err(&udev->dev, "Could not upload firmware code uph. Error number %d\n", @@ -867,7 +779,7 @@ static inline void init_usb_interrupt(struct zd_usb *usb) spin_lock_init(&intr->lock); intr->interval = int_urb_interval(zd_usb_to_usbdev(usb)); init_completion(&intr->read_regs.completion); - intr->read_regs.cr_int_addr = cpu_to_le16(usb_addr(usb, CR_INTERRUPT)); + intr->read_regs.cr_int_addr = cpu_to_le16((u16)CR_INTERRUPT); } static inline void init_usb_rx(struct zd_usb *usb) @@ -899,22 +811,6 @@ void zd_usb_init(struct zd_usb *usb, struct net_device *netdev, init_usb_rx(usb); } -int zd_usb_init_hw(struct zd_usb *usb) -{ - int r; - struct zd_chip *chip = zd_usb_to_chip(usb); - - ZD_ASSERT(mutex_is_locked(&chip->mutex)); - r = zd_ioread16_locked(chip, &usb->fw_base_offset, - USB_REG((u16)FW_BASE_ADDR_OFFSET)); - if (r) - return r; - dev_dbg_f(zd_usb_dev(usb), "fw_base_offset: %#06hx\n", - usb->fw_base_offset); - - return 0; -} - void zd_usb_clear(struct zd_usb *usb) { usb_set_intfdata(usb->intf, NULL); @@ -1265,7 +1161,7 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, return -ENOMEM; req->id = cpu_to_le16(USB_REQ_READ_REGS); for (i = 0; i < count; i++) - req->addr[i] = cpu_to_le16(usb_addr(usb, addresses[i])); + req->addr[i] = cpu_to_le16((u16)addresses[i]); udev = zd_usb_to_usbdev(usb); prepare_read_regs_int(usb); @@ -1330,7 +1226,7 @@ int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, req->id = cpu_to_le16(USB_REQ_WRITE_REGS); for (i = 0; i < count; i++) { struct reg_data *rw = &req->reg_writes[i]; - rw->addr = cpu_to_le16(usb_addr(usb, ioreqs[i].addr)); + rw->addr = cpu_to_le16((u16)ioreqs[i].addr); rw->value = cpu_to_le16(ioreqs[i].value); } diff --git a/drivers/net/wireless/zd1211rw/zd_usb.h b/drivers/net/wireless/zd1211rw/zd_usb.h index 317d37c3667..506ea6a7439 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.h +++ b/drivers/net/wireless/zd1211rw/zd_usb.h @@ -25,7 +25,6 @@ #include <linux/usb.h> #include "zd_def.h" -#include "zd_types.h" enum devicetype { DEVICE_ZD1211 = 0, @@ -181,15 +180,14 @@ struct zd_usb_tx { spinlock_t lock; }; -/* Contains the usb parts. The structure doesn't require a lock, because intf - * and fw_base_offset, will not be changed after initialization. +/* Contains the usb parts. The structure doesn't require a lock because intf + * will not be changed after initialization. */ struct zd_usb { struct zd_usb_interrupt intr; struct zd_usb_rx rx; struct zd_usb_tx tx; struct usb_interface *intf; - u16 fw_base_offset; }; #define zd_usb_dev(usb) (&usb->intf->dev) |