diff options
Diffstat (limited to 'arch/blackfin/mach-bf527')
19 files changed, 7790 insertions, 2 deletions
diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index c3334cc5bcb..28c48619120 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -31,8 +31,8 @@ #include <linux/init.h> #include <asm/blackfin.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/mach-common/clocks.h> -#include <asm/mach/mem_init.h> +#include <asm/clocks.h> +#include <mach/mem_init.h> #endif .section .l1.text diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h new file mode 100644 index 00000000000..b7b166f4f06 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -0,0 +1,104 @@ +/* + * File: include/asm-blackfin/mach-bf527/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* This file shoule be up to date with: + * - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (1) +/* New Feature: EMAC TX DMA Word Alignment */ +#define ANOMALY_05000285 (1) +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* Incorrect Access of OTP_STATUS During otp_write() Function */ +#define ANOMALY_05000328 (1) +/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ +#define ANOMALY_05000337 (1) +/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ +#define ANOMALY_05000341 (1) +/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */ +#define ANOMALY_05000342 (1) +/* USB Calibration Value Is Not Initialized */ +#define ANOMALY_05000346 (1) +/* Preboot Routine Incorrectly Alters Reset Value of USB Register */ +#define ANOMALY_05000347 (1) +/* Security Features Are Not Functional */ +#define ANOMALY_05000348 (__SILICON_REVISION__ < 1) +/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ +#define ANOMALY_05000355 (1) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000364 (__SILICON_REVISION__ > 0) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* New Feature: Higher Default CCLK Rate */ +#define ANOMALY_05000368 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* Authentication Fails To Initiate */ +#define ANOMALY_05000376 (__SILICON_REVISION__ > 0) +/* Data Read From L3 Memory by USB DMA May be Corrupted */ +#define ANOMALY_05000380 (1) +/* USB Full-speed Mode not Fully Tested */ +#define ANOMALY_05000381 (1) +/* New Feature: Boot from OTP Memory */ +#define ANOMALY_05000385 (1) +/* New Feature: bfrom_SysControl() Routine */ +#define ANOMALY_05000386 (1) +/* New Feature: Programmable Preboot Settings */ +#define ANOMALY_05000387 (1) +/* Reset Vector Must Not Be in SDRAM Memory Space */ +#define ANOMALY_05000389 (1) +/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */ +#define ANOMALY_05000392 (1) +/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000393 (1) +/* New Feature: Log Buffer Functionality */ +#define ANOMALY_05000394 (1) +/* New Feature: Hook Routine Functionality */ +#define ANOMALY_05000395 (1) +/* New Feature: Header Indirect Bit */ +#define ANOMALY_05000396 (1) +/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */ +#define ANOMALY_05000397 (1) +/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */ +#define ANOMALY_05000398 (1) +/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */ +#define ANOMALY_05000399 (1) +/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */ +#define ANOMALY_05000401 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000125 (0) +#define ANOMALY_05000158 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000261 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000363 (0) + +#endif diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h new file mode 100644 index 00000000000..056eb4b9cd2 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/bf527.h @@ -0,0 +1,127 @@ +/* + * File: include/asm-blackfin/mach-bf527/bf527.h + * Based on: include/asm-blackfin/mach-bf537/bf537.h + * Author: Michael Hennerich (michael.hennerich@analog.com) + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527 + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF527_H__ +#define __MACH_BF527_H__ + +#define SUPPORTED_REVID 2 + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#ifdef CONFIG_BF527 +#define CPU "BF527" +#endif +#ifdef CONFIG_BF525 +#define CPU "BF525" +#endif +#ifdef CONFIG_BF522 +#define CPU "BF522" +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#endif /* __MACH_BF527_H__ */ diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h new file mode 100644 index 00000000000..2526b6ed6fa --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -0,0 +1,195 @@ +/* + * file: include/asm-blackfin/mach-bf527/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v) +#define UART_PUT_DLL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLL), v) +#define UART_PUT_IER(uart, v) bfin_write16(((uart)->port.membase + OFFSET_IER), v) +#define UART_SET_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) +#define UART_PUT_DLH(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLH), v) +#define UART_PUT_LCR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_LCR), v) +#define UART_PUT_GCTL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_GCTL), v) + +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +# define CONFIG_SERIAL_BFIN_CTSRTS + +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_CTS_PIN +# define CONFIG_UART1_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_RTS_PIN +# define CONFIG_UART1_RTS_PIN -1 +# endif +#endif +/* + * The pin configuration is different from schematic + */ +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; + unsigned int lsr; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct timer_list cts_timer; + int cts_pin; + int rts_pin; +#endif +}; + +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + 0xFFC00400, + IRQ_UART0_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART0_TX, + CH_UART0_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + 0xFFC02000, + IRQ_UART1_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART1_TX, + CH_UART1_RX, +#endif +#ifdef CONFIG_BFIN_UART1_CTSRTS + CONFIG_UART1_CTS_PIN, + CONFIG_UART1_RTS_PIN, +#endif + }, +#endif +}; + +int nr_ports = ARRAY_SIZE(bfin_serial_resource); + +#define DRIVER_NAME "bfin-uart" + +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ + +#ifdef CONFIG_SERIAL_BFIN_UART0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_UART1 + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, DRIVER_NAME); + gpio_direction_input(uart->cts_pin); + } + + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, DRIVER_NAME); + gpio_direction_output(uart->rts_pin, 0); + } +#endif +} diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_sir.h b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h new file mode 100644 index 00000000000..cfd8ad4f1f2 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h @@ -0,0 +1,142 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART0_RX, + CH_UART0_RX, + CH_UART0_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + 0xFFC02000, + IRQ_UART1_RX, + CH_UART1_RX, + CH_UART1_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static int bfin_sir_hw_init(void) +{ + int ret = -ENODEV; +#ifdef CONFIG_BFIN_SIR0 + ret = peripheral_request(P_UART0_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART0_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + +#ifdef CONFIG_BFIN_SIR1 + ret = peripheral_request(P_UART1_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART1_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + return ret; +} diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h new file mode 100644 index 00000000000..297821e2d79 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h @@ -0,0 +1,93 @@ +/* + * File: include/asm-blackfin/mach-bf527/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF527_FAMILY + +#include "bf527.h" +#include "mem_map.h" +#include "defBF522.h" +#include "anomaly.h" + +#if defined(CONFIG_BF527) || defined(CONFIG_BF526) +#include "defBF527.h" +#endif + +#if defined(CONFIG_BF525) || defined(CONFIG_BF524) +#include "defBF525.h" +#endif + +#if !defined(__ASSEMBLY__) +#include "cdefBF522.h" + +#if defined(CONFIG_BF527) || defined(CONFIG_BF526) +#include "cdefBF527.h" +#endif + +#if defined(CONFIG_BF525) || defined(CONFIG_BF524) +#include "cdefBF525.h" +#endif +#endif + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 + +#define BFIN_UART_NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +/* DPMC*/ +#define bfin_read_STOPCK_OFF() bfin_read_STOPCK() +#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) +#define STOPCK_OFF STOPCK + +/* PLL_DIV Masks */ +#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ + +#endif diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h new file mode 100644 index 00000000000..663c2bbdfd9 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h @@ -0,0 +1,46 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefbf522.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF522_H +#define _CDEF_BF522_H + +/* include all Core registers and bit definitions */ +#include "defBF522.h" + +/* include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */ + +/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "cdefBF52x_base.h" + +#endif /* _CDEF_BF522_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h new file mode 100644 index 00000000000..00377eb59b7 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h @@ -0,0 +1,461 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefbf525.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF525_H +#define _CDEF_BF525_H + +/* include all Core registers and bit definitions */ +#include "defBF525.h" + +/* include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ + +/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "cdefBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF525 that are not in the common header */ + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endpoint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) + +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) + +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endpoint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) + +/* USB Endpoint 1 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) + +/* USB Endpoint 2 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) + +/* USB Endpoint 3 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) + +/* USB Endpoint 4 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) + +/* USB Endpoint 5 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) + +/* USB Endpoint 6 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) + +/* USB Endpoint 7 Control Registers */ + +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) + +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +#endif /* _CDEF_BF525_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h new file mode 100644 index 00000000000..fca8db70811 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h @@ -0,0 +1,626 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefbf527.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF527_H +#define _CDEF_BF527_H + +/* include all Core registers and bit definitions */ +#include "defBF527.h" + +/* include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ + +/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "cdefBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF527 that are not in the common header */ + +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ + +#define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE) +#define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE, val) +#define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO) +#define bfin_write_EMAC_ADDRLO(val) bfin_write32(EMAC_ADDRLO, val) +#define bfin_read_EMAC_ADDRHI() bfin_read32(EMAC_ADDRHI) +#define bfin_write_EMAC_ADDRHI(val) bfin_write32(EMAC_ADDRHI, val) +#define bfin_read_EMAC_HASHLO() bfin_read32(EMAC_HASHLO) +#define bfin_write_EMAC_HASHLO(val) bfin_write32(EMAC_HASHLO, val) +#define bfin_read_EMAC_HASHHI() bfin_read32(EMAC_HASHHI) +#define bfin_write_EMAC_HASHHI(val) bfin_write32(EMAC_HASHHI, val) +#define bfin_read_EMAC_STAADD() bfin_read32(EMAC_STAADD) +#define bfin_write_EMAC_STAADD(val) bfin_write32(EMAC_STAADD, val) +#define bfin_read_EMAC_STADAT() bfin_read32(EMAC_STADAT) +#define bfin_write_EMAC_STADAT(val) bfin_write32(EMAC_STADAT, val) +#define bfin_read_EMAC_FLC() bfin_read32(EMAC_FLC) +#define bfin_write_EMAC_FLC(val) bfin_write32(EMAC_FLC, val) +#define bfin_read_EMAC_VLAN1() bfin_read32(EMAC_VLAN1) +#define bfin_write_EMAC_VLAN1(val) bfin_write32(EMAC_VLAN1, val) +#define bfin_read_EMAC_VLAN2() bfin_read32(EMAC_VLAN2) +#define bfin_write_EMAC_VLAN2(val) bfin_write32(EMAC_VLAN2, val) +#define bfin_read_EMAC_WKUP_CTL() bfin_read32(EMAC_WKUP_CTL) +#define bfin_write_EMAC_WKUP_CTL(val) bfin_write32(EMAC_WKUP_CTL, val) +#define bfin_read_EMAC_WKUP_FFMSK0() bfin_read32(EMAC_WKUP_FFMSK0) +#define bfin_write_EMAC_WKUP_FFMSK0(val) bfin_write32(EMAC_WKUP_FFMSK0, val) +#define bfin_read_EMAC_WKUP_FFMSK1() bfin_read32(EMAC_WKUP_FFMSK1) +#define bfin_write_EMAC_WKUP_FFMSK1(val) bfin_write32(EMAC_WKUP_FFMSK1, val) +#define bfin_read_EMAC_WKUP_FFMSK2() bfin_read32(EMAC_WKUP_FFMSK2) +#define bfin_write_EMAC_WKUP_FFMSK2(val) bfin_write32(EMAC_WKUP_FFMSK2, val) +#define bfin_read_EMAC_WKUP_FFMSK3() bfin_read32(EMAC_WKUP_FFMSK3) +#define bfin_write_EMAC_WKUP_FFMSK3(val) bfin_write32(EMAC_WKUP_FFMSK3, val) +#define bfin_read_EMAC_WKUP_FFCMD() bfin_read32(EMAC_WKUP_FFCMD) +#define bfin_write_EMAC_WKUP_FFCMD(val) bfin_write32(EMAC_WKUP_FFCMD, val) +#define bfin_read_EMAC_WKUP_FFOFF() bfin_read32(EMAC_WKUP_FFOFF) +#define bfin_write_EMAC_WKUP_FFOFF(val) bfin_write32(EMAC_WKUP_FFOFF, val) +#define bfin_read_EMAC_WKUP_FFCRC0() bfin_read32(EMAC_WKUP_FFCRC0) +#define bfin_write_EMAC_WKUP_FFCRC0(val) bfin_write32(EMAC_WKUP_FFCRC0, val) +#define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1) +#define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1, val) + +#define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL) +#define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL, val) +#define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT) +#define bfin_write_EMAC_SYSTAT(val) bfin_write32(EMAC_SYSTAT, val) +#define bfin_read_EMAC_RX_STAT() bfin_read32(EMAC_RX_STAT) +#define bfin_write_EMAC_RX_STAT(val) bfin_write32(EMAC_RX_STAT, val) +#define bfin_read_EMAC_RX_STKY() bfin_read32(EMAC_RX_STKY) +#define bfin_write_EMAC_RX_STKY(val) bfin_write32(EMAC_RX_STKY, val) +#define bfin_read_EMAC_RX_IRQE() bfin_read32(EMAC_RX_IRQE) +#define bfin_write_EMAC_RX_IRQE(val) bfin_write32(EMAC_RX_IRQE, val) +#define bfin_read_EMAC_TX_STAT() bfin_read32(EMAC_TX_STAT) +#define bfin_write_EMAC_TX_STAT(val) bfin_write32(EMAC_TX_STAT, val) +#define bfin_read_EMAC_TX_STKY() bfin_read32(EMAC_TX_STKY) +#define bfin_write_EMAC_TX_STKY(val) bfin_write32(EMAC_TX_STKY, val) +#define bfin_read_EMAC_TX_IRQE() bfin_read32(EMAC_TX_IRQE) +#define bfin_write_EMAC_TX_IRQE(val) bfin_write32(EMAC_TX_IRQE, val) + +#define bfin_read_EMAC_MMC_CTL() bfin_read32(EMAC_MMC_CTL) +#define bfin_write_EMAC_MMC_CTL(val) bfin_write32(EMAC_MMC_CTL, val) +#define bfin_read_EMAC_MMC_RIRQS() bfin_read32(EMAC_MMC_RIRQS) +#define bfin_write_EMAC_MMC_RIRQS(val) bfin_write32(EMAC_MMC_RIRQS, val) +#define bfin_read_EMAC_MMC_RIRQE() bfin_read32(EMAC_MMC_RIRQE) +#define bfin_write_EMAC_MMC_RIRQE(val) bfin_write32(EMAC_MMC_RIRQE, val) +#define bfin_read_EMAC_MMC_TIRQS() bfin_read32(EMAC_MMC_TIRQS) +#define bfin_write_EMAC_MMC_TIRQS(val) bfin_write32(EMAC_MMC_TIRQS, val) +#define bfin_read_EMAC_MMC_TIRQE() bfin_read32(EMAC_MMC_TIRQE) +#define bfin_write_EMAC_MMC_TIRQE(val) bfin_write32(EMAC_MMC_TIRQE, val) + +#define bfin_read_EMAC_RXC_OK() bfin_read32(EMAC_RXC_OK) +#define bfin_write_EMAC_RXC_OK(val) bfin_write32(EMAC_RXC_OK, val) +#define bfin_read_EMAC_RXC_FCS() bfin_read32(EMAC_RXC_FCS) +#define bfin_write_EMAC_RXC_FCS(val) bfin_write32(EMAC_RXC_FCS, val) +#define bfin_read_EMAC_RXC_ALIGN() bfin_read32(EMAC_RXC_ALIGN) +#define bfin_write_EMAC_RXC_ALIGN(val) bfin_write32(EMAC_RXC_ALIGN, val) +#define bfin_read_EMAC_RXC_OCTET() bfin_read32(EMAC_RXC_OCTET) +#define bfin_write_EMAC_RXC_OCTET(val) bfin_write32(EMAC_RXC_OCTET, val) +#define bfin_read_EMAC_RXC_DMAOVF() bfin_read32(EMAC_RXC_DMAOVF) +#define bfin_write_EMAC_RXC_DMAOVF(val) bfin_write32(EMAC_RXC_DMAOVF, val) +#define bfin_read_EMAC_RXC_UNICST() bfin_read32(EMAC_RXC_UNICST) +#define bfin_write_EMAC_RXC_UNICST(val) bfin_write32(EMAC_RXC_UNICST, val) +#define bfin_read_EMAC_RXC_MULTI() bfin_read32(EMAC_RXC_MULTI) +#define bfin_write_EMAC_RXC_MULTI(val) bfin_write32(EMAC_RXC_MULTI, val) +#define bfin_read_EMAC_RXC_BROAD() bfin_read32(EMAC_RXC_BROAD) +#define bfin_write_EMAC_RXC_BROAD(val) bfin_write32(EMAC_RXC_BROAD, val) +#define bfin_read_EMAC_RXC_LNERRI() bfin_read32(EMAC_RXC_LNERRI) +#define bfin_write_EMAC_RXC_LNERRI(val) bfin_write32(EMAC_RXC_LNERRI, val) +#define bfin_read_EMAC_RXC_LNERRO() bfin_read32(EMAC_RXC_LNERRO) +#define bfin_write_EMAC_RXC_LNERRO(val) bfin_write32(EMAC_RXC_LNERRO, val) +#define bfin_read_EMAC_RXC_LONG() bfin_read32(EMAC_RXC_LONG) +#define bfin_write_EMAC_RXC_LONG(val) bfin_write32(EMAC_RXC_LONG, val) +#define bfin_read_EMAC_RXC_MACCTL() bfin_read32(EMAC_RXC_MACCTL) +#define bfin_write_EMAC_RXC_MACCTL(val) bfin_write32(EMAC_RXC_MACCTL, val) +#define bfin_read_EMAC_RXC_OPCODE() bfin_read32(EMAC_RXC_OPCODE) +#define bfin_write_EMAC_RXC_OPCODE(val) bfin_write32(EMAC_RXC_OPCODE, val) +#define bfin_read_EMAC_RXC_PAUSE() bfin_read32(EMAC_RXC_PAUSE) +#define bfin_write_EMAC_RXC_PAUSE(val) bfin_write32(EMAC_RXC_PAUSE, val) +#define bfin_read_EMAC_RXC_ALLFRM() bfin_read32(EMAC_RXC_ALLFRM) +#define bfin_write_EMAC_RXC_ALLFRM(val) bfin_write32(EMAC_RXC_ALLFRM, val) +#define bfin_read_EMAC_RXC_ALLOCT() bfin_read32(EMAC_RXC_ALLOCT) +#define bfin_write_EMAC_RXC_ALLOCT(val) bfin_write32(EMAC_RXC_ALLOCT, val) +#define bfin_read_EMAC_RXC_TYPED() bfin_read32(EMAC_RXC_TYPED) +#define bfin_write_EMAC_RXC_TYPED(val) bfin_write32(EMAC_RXC_TYPED, val) +#define bfin_read_EMAC_RXC_SHORT() bfin_read32(EMAC_RXC_SHORT) +#define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT, val) +#define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64) +#define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64, val) +#define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128) +#define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128, val) +#define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256) +#define bfin_write_EMAC_RXC_LT256(val) bfin_write32(EMAC_RXC_LT256, val) +#define bfin_read_EMAC_RXC_LT512() bfin_read32(EMAC_RXC_LT512) +#define bfin_write_EMAC_RXC_LT512(val) bfin_write32(EMAC_RXC_LT512, val) +#define bfin_read_EMAC_RXC_LT1024() bfin_read32(EMAC_RXC_LT1024) +#define bfin_write_EMAC_RXC_LT1024(val) bfin_write32(EMAC_RXC_LT1024, val) +#define bfin_read_EMAC_RXC_GE1024() bfin_read32(EMAC_RXC_GE1024) +#define bfin_write_EMAC_RXC_GE1024(val) bfin_write32(EMAC_RXC_GE1024, val) + +#define bfin_read_EMAC_TXC_OK() bfin_read32(EMAC_TXC_OK) +#define bfin_write_EMAC_TXC_OK(val) bfin_write32(EMAC_TXC_OK, val) +#define bfin_read_EMAC_TXC_1COL() bfin_read32(EMAC_TXC_1COL) +#define bfin_write_EMAC_TXC_1COL(val) bfin_write32(EMAC_TXC_1COL, val) +#define bfin_read_EMAC_TXC_GT1COL() bfin_read32(EMAC_TXC_GT1COL) +#define bfin_write_EMAC_TXC_GT1COL(val) bfin_write32(EMAC_TXC_GT1COL, val) +#define bfin_read_EMAC_TXC_OCTET() bfin_read32(EMAC_TXC_OCTET) +#define bfin_write_EMAC_TXC_OCTET(val) bfin_write32(EMAC_TXC_OCTET, val) +#define bfin_read_EMAC_TXC_DEFER() bfin_read32(EMAC_TXC_DEFER) +#define bfin_write_EMAC_TXC_DEFER(val) bfin_write32(EMAC_TXC_DEFER, val) +#define bfin_read_EMAC_TXC_LATECL() bfin_read32(EMAC_TXC_LATECL) +#define bfin_write_EMAC_TXC_LATECL(val) bfin_write32(EMAC_TXC_LATECL, val) +#define bfin_read_EMAC_TXC_XS_COL() bfin_read32(EMAC_TXC_XS_COL) +#define bfin_write_EMAC_TXC_XS_COL(val) bfin_write32(EMAC_TXC_XS_COL, val) +#define bfin_read_EMAC_TXC_DMAUND() bfin_read32(EMAC_TXC_DMAUND) +#define bfin_write_EMAC_TXC_DMAUND(val) bfin_write32(EMAC_TXC_DMAUND, val) +#define bfin_read_EMAC_TXC_CRSERR() bfin_read32(EMAC_TXC_CRSERR) +#define bfin_write_EMAC_TXC_CRSERR(val) bfin_write32(EMAC_TXC_CRSERR, val) +#define bfin_read_EMAC_TXC_UNICST() bfin_read32(EMAC_TXC_UNICST) +#define bfin_write_EMAC_TXC_UNICST(val) bfin_write32(EMAC_TXC_UNICST, val) +#define bfin_read_EMAC_TXC_MULTI() bfin_read32(EMAC_TXC_MULTI) +#define bfin_write_EMAC_TXC_MULTI(val) bfin_write32(EMAC_TXC_MULTI, val) +#define bfin_read_EMAC_TXC_BROAD() bfin_read32(EMAC_TXC_BROAD) +#define bfin_write_EMAC_TXC_BROAD(val) bfin_write32(EMAC_TXC_BROAD, val) +#define bfin_read_EMAC_TXC_XS_DFR() bfin_read32(EMAC_TXC_XS_DFR) +#define bfin_write_EMAC_TXC_XS_DFR(val) bfin_write32(EMAC_TXC_XS_DFR, val) +#define bfin_read_EMAC_TXC_MACCTL() bfin_read32(EMAC_TXC_MACCTL) +#define bfin_write_EMAC_TXC_MACCTL(val) bfin_write32(EMAC_TXC_MACCTL, val) +#define bfin_read_EMAC_TXC_ALLFRM() bfin_read32(EMAC_TXC_ALLFRM) +#define bfin_write_EMAC_TXC_ALLFRM(val) bfin_write32(EMAC_TXC_ALLFRM, val) +#define bfin_read_EMAC_TXC_ALLOCT() bfin_read32(EMAC_TXC_ALLOCT) +#define bfin_write_EMAC_TXC_ALLOCT(val) bfin_write32(EMAC_TXC_ALLOCT, val) +#define bfin_read_EMAC_TXC_EQ64() bfin_read32(EMAC_TXC_EQ64) +#define bfin_write_EMAC_TXC_EQ64(val) bfin_write32(EMAC_TXC_EQ64, val) +#define bfin_read_EMAC_TXC_LT128() bfin_read32(EMAC_TXC_LT128) +#define bfin_write_EMAC_TXC_LT128(val) bfin_write32(EMAC_TXC_LT128, val) +#define bfin_read_EMAC_TXC_LT256() bfin_read32(EMAC_TXC_LT256) +#define bfin_write_EMAC_TXC_LT256(val) bfin_write32(EMAC_TXC_LT256, val) +#define bfin_read_EMAC_TXC_LT512() bfin_read32(EMAC_TXC_LT512) +#define bfin_write_EMAC_TXC_LT512(val) bfin_write32(EMAC_TXC_LT512, val) +#define bfin_read_EMAC_TXC_LT1024() bfin_read32(EMAC_TXC_LT1024) +#define bfin_write_EMAC_TXC_LT1024(val) bfin_write32(EMAC_TXC_LT1024, val) +#define bfin_read_EMAC_TXC_GE1024() bfin_read32(EMAC_TXC_GE1024) +#define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024, val) +#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) +#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endpoint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) + +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) + +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endpoint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) + +/* USB Endpoint 1 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) + +/* USB Endpoint 2 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) + +/* USB Endpoint 3 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) + +/* USB Endpoint 4 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) + +/* USB Endpoint 5 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) + +/* USB Endpoint 6 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) + +/* USB Endpoint 7 Control Registers */ + +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) + +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +#endif /* _CDEF_BF527_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h new file mode 100644 index 00000000000..9a814b9a12b --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h @@ -0,0 +1,1204 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefBF52x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF52X_H +#define _CDEF_BF52X_H + +#include <asm/system.h> +#include <asm/blackfin.h> + +#include "defBF52x_base.h" + +/* Include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* ==== begin from cdefBF534.h ==== */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore(flags); +} +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore(flags); +} +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) + + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST, val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) + +#define bfin_read_SIC_RVECT() bfin_read32(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_write32(SIC_RVECT, val) +#define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) +#define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) +#define bfin_read_SIC_IMASK(x) bfin_read32(SIC_IMASK0 + (x << 6)) +#define bfin_write_SIC_IMASK(x, val) bfin_write32((SIC_IMASK0 + (x << 6)), val) + +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) + +#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0) +#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) +#define bfin_read_SIC_ISR(x) bfin_read32(SIC_ISR0 + (x << 6)) +#define bfin_write_SIC_ISR(x, val) bfin_write32((SIC_ISR0 + (x << 6)), val) + +#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) +#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) +#define bfin_read_SIC_IWR(x) bfin_read32(SIC_IWR0 + (x << 6)) +#define bfin_write_SIC_IWR(x, val) bfin_write32((SIC_IWR0 + (x << 6)), val) + +/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */ + +#define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) +#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val) +#define bfin_read_SIC_IAR4() bfin_read32(SIC_IAR4) +#define bfin_write_SIC_IAR4(val) bfin_write32(SIC_IAR4, val) +#define bfin_read_SIC_IAR5() bfin_read32(SIC_IAR5) +#define bfin_write_SIC_IAR5(val) bfin_write32(SIC_IAR5, val) +#define bfin_read_SIC_IAR6() bfin_read32(SIC_IAR6) +#define bfin_write_SIC_IAR6(val) bfin_write32(SIC_IAR6, val) +#define bfin_read_SIC_IAR7() bfin_read32(SIC_IAR7) +#define bfin_write_SIC_IAR7(val) bfin_write32(SIC_IAR7, val) +#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) +#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) +#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) +#define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val) + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) + + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val) +#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST) +#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST, val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val) + + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) +#define bfin_read_UART0_IER() bfin_read16(UART0_IER) +#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER, val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) +#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR) +#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR, val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) +#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) +#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) + + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val) + + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) + +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) + +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) + +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) + +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) + +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) + +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) + +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) + +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE, val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE, val) +#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS, val) + + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define bfin_read_PORTFIO() bfin_read16(PORTFIO) +#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO, val) +#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) +#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR, val) +#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) +#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET, val) +#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) +#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val) +#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) +#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA, val) +#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) +#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val) +#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) +#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val) +#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) +#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val) +#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) +#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB, val) +#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) +#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val) +#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) +#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val) +#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) +#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val) +#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) +#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR, val) +#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) +#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR, val) +#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) +#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE, val) +#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) +#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH, val) +#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) +#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN, val) + + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX32) +#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX32, val) +#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX32) +#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX32, val) +#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX16) +#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX16, val) +#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX16) +#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX16, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) + + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) +#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX32) +#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX32, val) +#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX32) +#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX32, val) +#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX16) +#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX16, val) +#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX16) +#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX16, val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) + + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL, val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL, val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC, val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT, val) + + +/* DMA Traffic Control Registers */ +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER, val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT, val) + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) +#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER, val) +#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) +#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT, val) + +/* DMA Controller */ +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR, val) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR, val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR, val) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) + +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR, val) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR, val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR, val) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) + +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR, val) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR, val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR, val) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) + +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR, val) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR, val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR, val) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) + +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR, val) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR, val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR, val) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) + +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR, val) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR, val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR, val) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) + +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR, val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR, val) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) + +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR, val) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR, val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR, val) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) + +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR, val) +#define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR, val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR, val) +#define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) + +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR, val) +#define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR, val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR, val) +#define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) + +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR, val) +#define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR, val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) + +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR, val) +#define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR, val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR, val) +#define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR, val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR, val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR, val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR, val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR, val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR, val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR, val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR, val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val) + + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val) + + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define bfin_read_PORTGIO() bfin_read16(PORTGIO) +#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO, val) +#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR) +#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR, val) +#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET) +#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET, val) +#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE) +#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE, val) +#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA) +#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA, val) +#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR) +#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR, val) +#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET) +#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET, val) +#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE) +#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE, val) +#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB) +#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB, val) +#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR) +#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR, val) +#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET) +#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET, val) +#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE) +#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE, val) +#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR) +#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR, val) +#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR) +#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR, val) +#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE) +#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE, val) +#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH) +#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH, val) +#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN) +#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN, val) + + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define bfin_read_PORTHIO() bfin_read16(PORTHIO) +#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO, val) +#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR) +#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR, val) +#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET) +#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET, val) +#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE) +#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE, val) +#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA) +#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA, val) +#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR) +#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR, val) +#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET) +#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET, val) +#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE) +#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE, val) +#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB) +#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB, val) +#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR) +#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR, val) +#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET) +#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET, val) +#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE) +#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE, val) +#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR) +#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR, val) +#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR) +#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR, val) +#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE) +#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE, val) +#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH) +#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH, val) +#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN) +#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN, val) + + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) +#define bfin_read_UART1_IER() bfin_read16(UART1_IER) +#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER, val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) +#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR) +#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR, val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) +#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) +#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) + +/* Omit CAN register sets from the cdefBF534.h (CAN is not in the ADSP-BF52x processor) */ + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val) +#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val) +#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) +#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val) +#define bfin_read_PORT_MUX() bfin_read16(PORT_MUX) +#define bfin_write_PORT_MUX(val) bfin_write16(PORT_MUX, val) + + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) + +/* ==== end from cdefBF534.h ==== */ + +/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */ + +#define bfin_read_PORTF_MUX() bfin_read16(PORTF_MUX) +#define bfin_write_PORTF_MUX(val) bfin_write16(PORTF_MUX, val) +#define bfin_read_PORTG_MUX() bfin_read16(PORTG_MUX) +#define bfin_write_PORTG_MUX(val) bfin_write16(PORTG_MUX, val) +#define bfin_read_PORTH_MUX() bfin_read16(PORTH_MUX) +#define bfin_write_PORTH_MUX(val) bfin_write16(PORTH_MUX, val) + +#define bfin_read_PORTF_DRIVE() bfin_read16(PORTF_DRIVE) +#define bfin_write_PORTF_DRIVE(val) bfin_write16(PORTF_DRIVE, val) +#define bfin_read_PORTG_DRIVE() bfin_read16(PORTG_DRIVE) +#define bfin_write_PORTG_DRIVE(val) bfin_write16(PORTG_DRIVE, val) +#define bfin_read_PORTH_DRIVE() bfin_read16(PORTH_DRIVE) +#define bfin_write_PORTH_DRIVE(val) bfin_write16(PORTH_DRIVE, val) +#define bfin_read_PORTF_SLEW() bfin_read16(PORTF_SLEW) +#define bfin_write_PORTF_SLEW(val) bfin_write16(PORTF_SLEW, val) +#define bfin_read_PORTG_SLEW() bfin_read16(PORTG_SLEW) +#define bfin_write_PORTG_SLEW(val) bfin_write16(PORTG_SLEW, val) +#define bfin_read_PORTH_SLEW() bfin_read16(PORTH_SLEW) +#define bfin_write_PORTH_SLEW(val) bfin_write16(PORTH_SLEW, val) +#define bfin_read_PORTF_HYSTERISIS() bfin_read16(PORTF_HYSTERISIS) +#define bfin_write_PORTF_HYSTERISIS(val) bfin_write16(PORTF_HYSTERISIS, val) +#define bfin_read_PORTG_HYSTERISIS() bfin_read16(PORTG_HYSTERISIS) +#define bfin_write_PORTG_HYSTERISIS(val) bfin_write16(PORTG_HYSTERISIS, val) +#define bfin_read_PORTH_HYSTERISIS() bfin_read16(PORTH_HYSTERISIS) +#define bfin_write_PORTH_HYSTERISIS(val) bfin_write16(PORTH_HYSTERISIS, val) +#define bfin_read_MISCPORT_DRIVE() bfin_read16(MISCPORT_DRIVE) +#define bfin_write_MISCPORT_DRIVE(val) bfin_write16(MISCPORT_DRIVE, val) +#define bfin_read_MISCPORT_SLEW() bfin_read16(MISCPORT_SLEW) +#define bfin_write_MISCPORT_SLEW(val) bfin_write16(MISCPORT_SLEW, val) +#define bfin_read_MISCPORT_HYSTERISIS() bfin_read16(MISCPORT_HYSTERISIS) +#define bfin_write_MISCPORT_HYSTERISIS(val) bfin_write16(MISCPORT_HYSTERISIS, val) + +/* HOST Port Registers */ + +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) + +/* Counter Registers */ + +#define bfin_read_CNT_CONFIG() bfin_read16(CNT_CONFIG) +#define bfin_write_CNT_CONFIG(val) bfin_write16(CNT_CONFIG, val) +#define bfin_read_CNT_IMASK() bfin_read16(CNT_IMASK) +#define bfin_write_CNT_IMASK(val) bfin_write16(CNT_IMASK, val) +#define bfin_read_CNT_STATUS() bfin_read16(CNT_STATUS) +#define bfin_write_CNT_STATUS(val) bfin_write16(CNT_STATUS, val) +#define bfin_read_CNT_COMMAND() bfin_read16(CNT_COMMAND) +#define bfin_write_CNT_COMMAND(val) bfin_write16(CNT_COMMAND, val) +#define bfin_read_CNT_DEBOUNCE() bfin_read16(CNT_DEBOUNCE) +#define bfin_write_CNT_DEBOUNCE(val) bfin_write16(CNT_DEBOUNCE, val) +#define bfin_read_CNT_COUNTER() bfin_read32(CNT_COUNTER) +#define bfin_write_CNT_COUNTER(val) bfin_write32(CNT_COUNTER, val) +#define bfin_read_CNT_MAX() bfin_read32(CNT_MAX) +#define bfin_write_CNT_MAX(val) bfin_write32(CNT_MAX, val) +#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) +#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) + +/* OTP/FUSE Registers */ + +#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) +#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) +#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) +#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) +#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) +#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) +#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) +#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) + +/* Security Registers */ + +#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) +#define bfin_write_SECURE_SYSSWT(val) bfin_write32(SECURE_SYSSWT, val) +#define bfin_read_SECURE_CONTROL() bfin_read16(SECURE_CONTROL) +#define bfin_write_SECURE_CONTROL(val) bfin_write16(SECURE_CONTROL, val) +#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) +#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) + +/* OTP Read/Write Data Buffer Registers */ + +#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) +#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) +#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) +#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) +#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) +#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) +#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) +#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) + +/* NFC Registers */ + +#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) +#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val) +#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT) +#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val) +#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT) +#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val) +#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK) +#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val) +#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0) +#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val) +#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1) +#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val) +#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2) +#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val) +#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3) +#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val) +#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT) +#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val) +#define bfin_read_NFC_RST() bfin_read16(NFC_RST) +#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val) +#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL) +#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val) +#define bfin_read_NFC_READ() bfin_read16(NFC_READ) +#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val) +#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR) +#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val) +#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD) +#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val) +#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR) +#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val) +#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD) +#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val) + +#endif /* _CDEF_BF52X_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h new file mode 100644 index 00000000000..0a8cdcdf0b4 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h @@ -0,0 +1,42 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF522.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF522_H +#define _DEF_BF522_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */ + +/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "defBF52x_base.h" + +#endif /* _DEF_BF522_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h new file mode 100644 index 00000000000..5cd7576fef7 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h @@ -0,0 +1,713 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF525.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF525_H +#define _DEF_BF525_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ + +/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "defBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF525 that are not in the common header */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03800 /* Function address register */ +#define USB_POWER 0xffc03804 /* Power management register */ +#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03820 /* USB frame number */ +#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */ + +#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */ + +#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ +#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ +#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ +#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ +#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ +#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ +#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ +#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ + +#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define nENABLE_SUSPENDM 0x0 +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define nSUSPEND_MODE 0x0 +#define RESUME_MODE 0x4 /* DMA Mode */ +#define nRESUME_MODE 0x0 +#define RESET 0x8 /* Reset indicator */ +#define nRESET 0x0 +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define nHS_MODE 0x0 +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define nHS_ENABLE 0x0 +#define SOFT_CONN 0x40 /* Soft connect */ +#define nSOFT_CONN 0x0 +#define ISO_UPDATE 0x80 /* Isochronous update */ +#define nISO_UPDATE 0x0 + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define nEP0_TX 0x0 +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define nEP1_TX 0x0 +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define nEP2_TX 0x0 +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define nEP3_TX 0x0 +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define nEP4_TX 0x0 +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define nEP5_TX 0x0 +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define nEP6_TX 0x0 +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ +#define nEP7_TX 0x0 + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define nEP1_RX 0x0 +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define nEP2_RX 0x0 +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define nEP3_RX 0x0 +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define nEP4_RX 0x0 +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define nEP5_RX 0x0 +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define nEP6_RX 0x0 +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ +#define nEP7_RX 0x0 + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define nEP0_TX_E 0x0 +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define nEP1_TX_E 0x0 +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define nEP2_TX_E 0x0 +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define nEP3_TX_E 0x0 +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define nEP4_TX_E 0x0 +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define nEP5_TX_E 0x0 +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define nEP6_TX_E 0x0 +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ +#define nEP7_TX_E 0x0 + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define nEP1_RX_E 0x0 +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define nEP2_RX_E 0x0 +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define nEP3_RX_E 0x0 +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define nEP4_RX_E 0x0 +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define nEP5_RX_E 0x0 +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define nEP6_RX_E 0x0 +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ +#define nEP7_RX_E 0x0 + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define nSUSPEND_B 0x0 +#define RESUME_B 0x2 /* Resume indicator */ +#define nRESUME_B 0x0 +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define nRESET_OR_BABLE_B 0x0 +#define SOF_B 0x8 /* Start of frame */ +#define nSOF_B 0x0 +#define CONN_B 0x10 /* Connection indicator */ +#define nCONN_B 0x0 +#define DISCON_B 0x20 /* Disconnect indicator */ +#define nDISCON_B 0x0 +#define SESSION_REQ_B 0x40 /* Session Request */ +#define nSESSION_REQ_B 0x0 +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ +#define nVBUS_ERROR_B 0x0 + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define nSUSPEND_BE 0x0 +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define nRESUME_BE 0x0 +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define nRESET_OR_BABLE_BE 0x0 +#define SOF_BE 0x8 /* Start of frame int enable */ +#define nSOF_BE 0x0 +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define nCONN_BE 0x0 +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define nDISCON_BE 0x0 +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define nSESSION_REQ_BE 0x0 +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ +#define nVBUS_ERROR_BE 0x0 + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define nGLOBAL_ENA 0x0 +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define nEP1_TX_ENA 0x0 +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define nEP2_TX_ENA 0x0 +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define nEP3_TX_ENA 0x0 +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define nEP4_TX_ENA 0x0 +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define nEP5_TX_ENA 0x0 +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define nEP6_TX_ENA 0x0 +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define nEP7_TX_ENA 0x0 +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define nEP1_RX_ENA 0x0 +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define nEP2_RX_ENA 0x0 +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define nEP3_RX_ENA 0x0 +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define nEP4_RX_ENA 0x0 +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define nEP5_RX_ENA 0x0 +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define nEP6_RX_ENA 0x0 +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ +#define nEP7_RX_ENA 0x0 + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define nSESSION 0x0 +#define HOST_REQ 0x2 /* Host negotiation request */ +#define nHOST_REQ 0x0 +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define nHOST_MODE 0x0 +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define nVBUS0 0x0 +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define nVBUS1 0x0 +#define LSDEV 0x20 /* Low-speed indicator */ +#define nLSDEV 0x0 +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define nFSDEV 0x0 +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ +#define nB_DEVICE 0x0 + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define nDRIVE_VBUS_ON 0x0 +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define nDRIVE_VBUS_OFF 0x0 +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define nCHRG_VBUS_START 0x0 +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define nCHRG_VBUS_END 0x0 +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define nDISCHRG_VBUS_START 0x0 +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ +#define nDISCHRG_VBUS_END 0x0 + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define nDRIVE_VBUS_ON_ENA 0x0 +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define nDRIVE_VBUS_OFF_ENA 0x0 +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define nCHRG_VBUS_START_ENA 0x0 +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define nCHRG_VBUS_END_ENA 0x0 +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define nDISCHRG_VBUS_START_ENA 0x0 +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ +#define nDISCHRG_VBUS_END_ENA 0x0 + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define nRXPKTRDY 0x0 +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define nTXPKTRDY 0x0 +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define nSTALL_SENT 0x0 +#define DATAEND 0x8 /* Data end indicator */ +#define nDATAEND 0x0 +#define SETUPEND 0x10 /* Setup end */ +#define nSETUPEND 0x0 +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define nSENDSTALL 0x0 +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define nSERVICED_RXPKTRDY 0x0 +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define nSERVICED_SETUPEND 0x0 +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define nFLUSHFIFO 0x0 +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define nSTALL_RECEIVED_H 0x0 +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define nSETUPPKT_H 0x0 +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define nERROR_H 0x0 +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define nREQPKT_H 0x0 +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define nSTATUSPKT_H 0x0 +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ +#define nNAK_TIMEOUT_H 0x0 + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define nTXPKTRDY_T 0x0 +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define nFIFO_NOT_EMPTY_T 0x0 +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define nUNDERRUN_T 0x0 +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define nFLUSHFIFO_T 0x0 +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define nSTALL_SEND_T 0x0 +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define nSTALL_SENT_T 0x0 +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_T 0x0 +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define nINCOMPTX_T 0x0 +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_T 0x0 +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define nFORCE_DATATOGGLE_T 0x0 +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_T 0x0 +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define nISO_T 0x0 +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOSET_T 0x0 +#define ERROR_TH 0x4 /* error condition host mode */ +#define nERROR_TH 0x0 +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_TH 0x0 +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ +#define nNAK_TIMEOUT_TH 0x0 + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define nRXPKTRDY_R 0x0 +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define nFIFO_FULL_R 0x0 +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define nOVERRUN_R 0x0 +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define nDATAERROR_R 0x0 +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define nFLUSHFIFO_R 0x0 +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define nSTALL_SEND_R 0x0 +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define nSTALL_SENT_R 0x0 +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_R 0x0 +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define nINCOMPRX_R 0x0 +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_R 0x0 +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define nDISNYET_R 0x0 +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_R 0x0 +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define nISO_R 0x0 +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOCLEAR_R 0x0 +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define nERROR_RH 0x0 +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define nREQPKT_RH 0x0 +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_RH 0x0 +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define nINCOMPRX_RH 0x0 +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define nDMAREQMODE_RH 0x0 +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ +#define nAUTOREQ_RH 0x0 + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define nDMA0_INT 0x0 +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define nDMA1_INT 0x0 +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define nDMA2_INT 0x0 +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define nDMA3_INT 0x0 +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define nDMA4_INT 0x0 +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define nDMA5_INT 0x0 +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define nDMA6_INT 0x0 +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ +#define nDMA7_INT 0x0 + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define nDMA_ENA 0x0 +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define nDIRECTION 0x0 +#define MODE 0x4 /* DMA Bus error */ +#define nMODE 0x0 +#define INT_ENA 0x8 /* Interrupt enable */ +#define nINT_ENA 0x0 +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ +#define nBUSERROR 0x0 + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +#endif /* _DEF_BF525_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h new file mode 100644 index 00000000000..f040f364afa --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h @@ -0,0 +1,1090 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF527.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF527_H +#define _DEF_BF527_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ + +/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "defBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF527 that are not in the common header */ +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ + +#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ +#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ +#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ +#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ +#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ +#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ +#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ +#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ +#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ +#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ +#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ +#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ +#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ +#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ +#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ +#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ +#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ +#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ +#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ + +#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ +#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ +#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ +#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ +#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ +#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ +#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ +#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ + +#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ +#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ +#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ +#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ +#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ + +#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ +#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ +#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ +#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ +#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ +#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ +#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ +#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ +#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ +#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ +#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ +#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ +#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ +#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ +#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ +#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ +#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ +#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ +#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ +#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ +#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ +#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ +#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ +#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ +#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ +#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ +#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ +#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ +#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ +#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ +#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ +#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ +#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ +#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ +#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ +#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ +#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ + +/* Listing for IEEE-Supported Count Registers */ + +#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ +#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ +#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ +#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ +#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ +#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ +#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ +#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ +#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ +#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ +#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ +#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ +#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ +#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ +#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ +#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ +#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ +#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ +#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ +#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ +#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ +#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ +#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ +#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ +#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ +#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ +#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ +#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ +#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ +#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ +#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ +#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ +#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ +#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ +#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ + +/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ + +/* EMAC_OPMODE Masks */ + +#define RE 0x00000001 /* Receiver Enable */ +#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ +#define HU 0x00000010 /* Hash Filter Unicast Address */ +#define HM 0x00000020 /* Hash Filter Multicast Address */ +#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ +#define PR 0x00000080 /* Promiscuous Mode Enable */ +#define IFE 0x00000100 /* Inverse Filtering Enable */ +#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ +#define PBF 0x00000400 /* Pass Bad Frames Enable */ +#define PSF 0x00000800 /* Pass Short Frames Enable */ +#define RAF 0x00001000 /* Receive-All Mode */ +#define TE 0x00010000 /* Transmitter Enable */ +#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ +#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ +#define DC 0x00080000 /* Deferral Check */ +#define BOLMT 0x00300000 /* Back-Off Limit */ +#define BOLMT_10 0x00000000 /* 10-bit range */ +#define BOLMT_8 0x00100000 /* 8-bit range */ +#define BOLMT_4 0x00200000 /* 4-bit range */ +#define BOLMT_1 0x00300000 /* 1-bit range */ +#define DRTY 0x00400000 /* Disable TX Retry On Collision */ +#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ +#define RMII 0x01000000 /* RMII/MII* Mode */ +#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ +#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ +#define LB 0x08000000 /* Internal Loopback Enable */ +#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ + +/* EMAC_STAADD Masks */ + +#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ +#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ +#define STADISPRE 0x00000004 /* Disable Preamble Generation */ +#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ +#define REGAD 0x000007C0 /* STA Register Address */ +#define PHYAD 0x0000F800 /* PHY Device Address */ + +#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ +#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ + +/* EMAC_STADAT Mask */ + +#define STADATA 0x0000FFFF /* Station Management Data */ + +/* EMAC_FLC Masks */ + +#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ +#define FLCE 0x00000002 /* Flow Control Enable */ +#define PCF 0x00000004 /* Pass Control Frames */ +#define BKPRSEN 0x00000008 /* Enable Backpressure */ +#define FLCPAUSE 0xFFFF0000 /* Pause Time */ + +#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ + +/* EMAC_WKUP_CTL Masks */ + +#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ +#define MPKE 0x00000002 /* Magic Packet Enable */ +#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ +#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ +#define MPKS 0x00000020 /* Magic Packet Received Status */ +#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ + +/* EMAC_WKUP_FFCMD Masks */ + +#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ +#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ +#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ +#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ +#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ +#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ +#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ +#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ + +/* EMAC_WKUP_FFOFF Masks */ + +#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ +#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ +#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ +#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ + +#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ +#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ +#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ +#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ +/* Set ALL Offsets */ +#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) + +/* EMAC_WKUP_FFCRC0 Masks */ + +#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ +#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ + +#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ +#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ + +/* EMAC_WKUP_FFCRC1 Masks */ + +#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ +#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ + +#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ +#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ + +/* EMAC_SYSCTL Masks */ + +#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ +#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ +#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ +#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */ +#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ + +#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ + +/* EMAC_SYSTAT Masks */ + +#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ +#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ +#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ +#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ +#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ +#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ +#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ +#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ + +/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ + +#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ +#define RX_COMP 0x00001000 /* RX Frame Complete */ +#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ +#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ +#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ +#define RX_CRC 0x00010000 /* RX Frame CRC Error */ +#define RX_LEN 0x00020000 /* RX Frame Length Error */ +#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ +#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ +#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ +#define RX_PHY 0x00200000 /* RX Frame PHY Error */ +#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ +#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ +#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ +#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ +#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ +#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ +#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ +#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ +#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ +#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ + +/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ + +#define TX_COMP 0x00000001 /* TX Frame Complete */ +#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ +#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ +#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ +#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ +#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ +#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ +#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ +#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ +#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ +#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ +#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ +#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ +#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ +#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ + +/* EMAC_MMC_CTL Masks */ +#define RSTC 0x00000001 /* Reset All Counters */ +#define CROLL 0x00000002 /* Counter Roll-Over Enable */ +#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ +#define MMCE 0x00000008 /* Enable MMC Counter Operation */ + +/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ +#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ +#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ +#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ +#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ +#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ +#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ +#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ +#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ +#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ +#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ +#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ +#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ +#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ +#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ +#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ +#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ +#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ +#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ +#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ +#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ +#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ +#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ +#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ +#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ + +/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ + +#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ +#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ +#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ +#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ +#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ +#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ +#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ +#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ +#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ +#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ +#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ +#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ +#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ +#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ +#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ +#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ +#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ +#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ +#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ +#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ +#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ +#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ +#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03800 /* Function address register */ +#define USB_POWER 0xffc03804 /* Power management register */ +#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03820 /* USB frame number */ +#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */ + +#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */ + +#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ +#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ +#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ +#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ +#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ +#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ +#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ +#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ + +#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define nENABLE_SUSPENDM 0x0 +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define nSUSPEND_MODE 0x0 +#define RESUME_MODE 0x4 /* DMA Mode */ +#define nRESUME_MODE 0x0 +#define RESET 0x8 /* Reset indicator */ +#define nRESET 0x0 +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define nHS_MODE 0x0 +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define nHS_ENABLE 0x0 +#define SOFT_CONN 0x40 /* Soft connect */ +#define nSOFT_CONN 0x0 +#define ISO_UPDATE 0x80 /* Isochronous update */ +#define nISO_UPDATE 0x0 + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define nEP0_TX 0x0 +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define nEP1_TX 0x0 +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define nEP2_TX 0x0 +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define nEP3_TX 0x0 +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define nEP4_TX 0x0 +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define nEP5_TX 0x0 +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define nEP6_TX 0x0 +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ +#define nEP7_TX 0x0 + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define nEP1_RX 0x0 +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define nEP2_RX 0x0 +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define nEP3_RX 0x0 +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define nEP4_RX 0x0 +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define nEP5_RX 0x0 +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define nEP6_RX 0x0 +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ +#define nEP7_RX 0x0 + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define nEP0_TX_E 0x0 +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define nEP1_TX_E 0x0 +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define nEP2_TX_E 0x0 +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define nEP3_TX_E 0x0 +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define nEP4_TX_E 0x0 +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define nEP5_TX_E 0x0 +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define nEP6_TX_E 0x0 +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ +#define nEP7_TX_E 0x0 + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define nEP1_RX_E 0x0 +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define nEP2_RX_E 0x0 +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define nEP3_RX_E 0x0 +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define nEP4_RX_E 0x0 +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define nEP5_RX_E 0x0 +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define nEP6_RX_E 0x0 +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ +#define nEP7_RX_E 0x0 + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define nSUSPEND_B 0x0 +#define RESUME_B 0x2 /* Resume indicator */ +#define nRESUME_B 0x0 +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define nRESET_OR_BABLE_B 0x0 +#define SOF_B 0x8 /* Start of frame */ +#define nSOF_B 0x0 +#define CONN_B 0x10 /* Connection indicator */ +#define nCONN_B 0x0 +#define DISCON_B 0x20 /* Disconnect indicator */ +#define nDISCON_B 0x0 +#define SESSION_REQ_B 0x40 /* Session Request */ +#define nSESSION_REQ_B 0x0 +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ +#define nVBUS_ERROR_B 0x0 + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define nSUSPEND_BE 0x0 +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define nRESUME_BE 0x0 +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define nRESET_OR_BABLE_BE 0x0 +#define SOF_BE 0x8 /* Start of frame int enable */ +#define nSOF_BE 0x0 +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define nCONN_BE 0x0 +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define nDISCON_BE 0x0 +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define nSESSION_REQ_BE 0x0 +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ +#define nVBUS_ERROR_BE 0x0 + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define nGLOBAL_ENA 0x0 +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define nEP1_TX_ENA 0x0 +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define nEP2_TX_ENA 0x0 +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define nEP3_TX_ENA 0x0 +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define nEP4_TX_ENA 0x0 +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define nEP5_TX_ENA 0x0 +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define nEP6_TX_ENA 0x0 +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define nEP7_TX_ENA 0x0 +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define nEP1_RX_ENA 0x0 +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define nEP2_RX_ENA 0x0 +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define nEP3_RX_ENA 0x0 +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define nEP4_RX_ENA 0x0 +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define nEP5_RX_ENA 0x0 +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define nEP6_RX_ENA 0x0 +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ +#define nEP7_RX_ENA 0x0 + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define nSESSION 0x0 +#define HOST_REQ 0x2 /* Host negotiation request */ +#define nHOST_REQ 0x0 +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define nHOST_MODE 0x0 +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define nVBUS0 0x0 +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define nVBUS1 0x0 +#define LSDEV 0x20 /* Low-speed indicator */ +#define nLSDEV 0x0 +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define nFSDEV 0x0 +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ +#define nB_DEVICE 0x0 + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define nDRIVE_VBUS_ON 0x0 +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define nDRIVE_VBUS_OFF 0x0 +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define nCHRG_VBUS_START 0x0 +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define nCHRG_VBUS_END 0x0 +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define nDISCHRG_VBUS_START 0x0 +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ +#define nDISCHRG_VBUS_END 0x0 + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define nDRIVE_VBUS_ON_ENA 0x0 +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define nDRIVE_VBUS_OFF_ENA 0x0 +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define nCHRG_VBUS_START_ENA 0x0 +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define nCHRG_VBUS_END_ENA 0x0 +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define nDISCHRG_VBUS_START_ENA 0x0 +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ +#define nDISCHRG_VBUS_END_ENA 0x0 + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define nRXPKTRDY 0x0 +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define nTXPKTRDY 0x0 +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define nSTALL_SENT 0x0 +#define DATAEND 0x8 /* Data end indicator */ +#define nDATAEND 0x0 +#define SETUPEND 0x10 /* Setup end */ +#define nSETUPEND 0x0 +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define nSENDSTALL 0x0 +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define nSERVICED_RXPKTRDY 0x0 +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define nSERVICED_SETUPEND 0x0 +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define nFLUSHFIFO 0x0 +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define nSTALL_RECEIVED_H 0x0 +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define nSETUPPKT_H 0x0 +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define nERROR_H 0x0 +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define nREQPKT_H 0x0 +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define nSTATUSPKT_H 0x0 +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ +#define nNAK_TIMEOUT_H 0x0 + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define nTXPKTRDY_T 0x0 +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define nFIFO_NOT_EMPTY_T 0x0 +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define nUNDERRUN_T 0x0 +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define nFLUSHFIFO_T 0x0 +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define nSTALL_SEND_T 0x0 +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define nSTALL_SENT_T 0x0 +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_T 0x0 +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define nINCOMPTX_T 0x0 +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_T 0x0 +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define nFORCE_DATATOGGLE_T 0x0 +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_T 0x0 +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define nISO_T 0x0 +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOSET_T 0x0 +#define ERROR_TH 0x4 /* error condition host mode */ +#define nERROR_TH 0x0 +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_TH 0x0 +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ +#define nNAK_TIMEOUT_TH 0x0 + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define nRXPKTRDY_R 0x0 +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define nFIFO_FULL_R 0x0 +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define nOVERRUN_R 0x0 +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define nDATAERROR_R 0x0 +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define nFLUSHFIFO_R 0x0 +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define nSTALL_SEND_R 0x0 +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define nSTALL_SENT_R 0x0 +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_R 0x0 +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define nINCOMPRX_R 0x0 +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_R 0x0 +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define nDISNYET_R 0x0 +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_R 0x0 +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define nISO_R 0x0 +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOCLEAR_R 0x0 +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define nERROR_RH 0x0 +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define nREQPKT_RH 0x0 +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_RH 0x0 +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define nINCOMPRX_RH 0x0 +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define nDMAREQMODE_RH 0x0 +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ +#define nAUTOREQ_RH 0x0 + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define nDMA0_INT 0x0 +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define nDMA1_INT 0x0 +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define nDMA2_INT 0x0 +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define nDMA3_INT 0x0 +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define nDMA4_INT 0x0 +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define nDMA5_INT 0x0 +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define nDMA6_INT 0x0 +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ +#define nDMA7_INT 0x0 + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define nDMA_ENA 0x0 +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define nDIRECTION 0x0 +#define MODE 0x4 /* DMA Bus error */ +#define nMODE 0x0 +#define INT_ENA 0x8 /* Interrupt enable */ +#define nINT_ENA 0x0 +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ +#define nBUSERROR 0x0 + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +#endif /* _DEF_BF527_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h new file mode 100644 index 00000000000..6ac2ed7026e --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -0,0 +1,2005 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF52x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF52X_H +#define _DEF_BF52X_H + + +/* ************************************************************** */ +/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x */ +/* ************************************************************** */ + +/* ==== begin from defBF534.h ==== */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control Register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xFFC0000C /* PLL Status Register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ +#define CHIPID 0xFFC00014 /* Device ID Register */ + + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register */ +#define SYSCR 0xFFC00104 /* System Configuration Register */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ + +#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */ + +/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */ +#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */ +#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */ +#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */ +#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */ +#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */ +#define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */ +#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */ + + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */ + + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART0_THR 0xFFC00400 /* Transmit Holding register */ +#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_MSR 0xFFC00418 /* Modem Status Register */ +#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART0_GCTL 0xFFC00424 /* Global Control Register */ + + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI0_REGBASE 0xFFC00500 +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ + +#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ + +#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ + +#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */ + +#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ + +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ + + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ +#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ +#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ +#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ +#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ +#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ +#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ +#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ +#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ +#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ +#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ +#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ +#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ +#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ +#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ +#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ +#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ + + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + + +/* DMA Traffic Control Registers */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ + +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ + +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ + +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ + +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ + +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ + +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ + +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ + +#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ + +#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ + +#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ + +#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ + +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ + +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ + +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ + +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ + + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define TWI0_REGBASE 0xFFC01400 +#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ + + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ +#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ +#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ +#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ +#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ +#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ +#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ +#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ +#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ +#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ +#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ +#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ +#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ +#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ +#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ +#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ +#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ + + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ +#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ +#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ +#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ +#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ +#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ +#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ +#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ +#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ +#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ +#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ +#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ +#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ +#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ +#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ +#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ +#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ + + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define UART1_THR 0xFFC02000 /* Transmit Holding register */ +#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ +#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ +#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_MSR 0xFFC02018 /* Modem Status Register */ +#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ +#define UART1_GCTL 0xFFC02024 /* Global Control Register */ + + +/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */ + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ +#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ +#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ +#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ + + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ + +#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ + +/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */ +#define PORTF_MUX 0xFFC03210 /* Port F mux control */ +#define PORTG_MUX 0xFFC03214 /* Port G mux control */ +#define PORTH_MUX 0xFFC03218 /* Port H mux control */ +#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */ +#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */ +#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */ +#define PORTF_SLEW 0xFFC03230 /* Port F slew control */ +#define PORTG_SLEW 0xFFC03234 /* Port G slew control */ +#define PORTH_SLEW 0xFFC03238 /* Port H slew control */ +#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */ +#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */ +#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */ +#define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */ +#define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */ +#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */ + + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ +/* +** ********************* PLL AND RESET MASKS ****************************************/ +/* PLL_CTL Masks */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* PLL Not Powered */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Enter Deep Sleep Mode */ +#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#define BYPASS 0x0100 /* Bypass the PLL */ +#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ + +/* VR_CTL Masks */ +#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */ +#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ +#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ +#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ +#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* SWRST Masks */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ + + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/ +/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */ + +#if 0 +#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */ + +#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */ +#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */ +#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ +#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ +#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ +#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */ +#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */ + +#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */ +#define IRQ_TWI 0x00000200 /* TWI Interrupt */ +#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */ +#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ +#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */ +#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */ +#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */ +#define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */ + +#define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */ +#define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */ +#define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */ +#define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */ +#define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */ +#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */ +#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */ +#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */ +#define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */ +#define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */ + +#define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */ +#define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */ +#define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */ +#define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */ +#define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */ +#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */ +#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */ +#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */ +#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */ +#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */ +#define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */ +#endif + +/* SIC_IAR0 Macros */ +#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Macros */ +#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Macros */ +#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IAR3 Macros */ +#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */ +#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */ +#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */ +#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */ +#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */ +#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */ +#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */ +#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */ + + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ + + +/* ********* WATCHDOG TIMER MASKS ******************** */ + +/* Watchdog Timer WDOG_CTL Register Masks */ + +#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ +#define WDEV_RESET 0x0000 /* generate reset event on roll over */ +#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ +#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ +#define WDEV_NONE 0x0006 /* no event on roll over */ +#define WDEN 0x0FF0 /* enable watchdog */ +#define WDDIS 0x0AD0 /* disable watchdog */ +#define WDRO 0x8000 /* watchdog rolled over latch */ + +/* depreciated WDOG_CTL Register Masks for legacy code */ + + +#define ICTL WDEV +#define ENABLE_RESET WDEV_RESET +#define WDOG_RESET WDEV_RESET +#define ENABLE_NMI WDEV_NMI +#define WDOG_NMI WDEV_NMI +#define ENABLE_GPI WDEV_GPI +#define WDOG_GPI WDEV_GPI +#define DISABLE_EVT WDEV_NONE +#define WDOG_NONE WDEV_NONE + +#define TMR_EN WDEN +#define TMR_DIS WDDIS +#define TRO WDRO +#define ICTL_P0 0x01 + #define ICTL_P1 0x02 +#define TRO_P 0x0F + + + +/* *************** REAL TIME CLOCK MASKS **************************/ +/* RTC_STAT and RTC_ALARM Masks */ +#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ +#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ +#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ +#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ + +/* RTC_ALARM Macro z=day y=hr x=min w=sec */ +#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) + +/* RTC_ICTL and RTC_ISTAT Masks */ +#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ +#define ALARM 0x0002 /* Alarm Interrupt Enable */ +#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ +#define MINUTE 0x0008 /* Minutes Interrupt Enable */ +#define HOUR 0x0010 /* Hours Interrupt Enable */ +#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ +#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WRITE_PENDING 0x4000 /* Write Pending Status */ +#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ + +/* RTC_FAST / RTC_PREN Mask */ +#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ + + +/* ************** UART CONTROLLER MASKS *************************/ +/* UARTx_LCR Masks */ +#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#define STB 0x04 /* Stop Bits */ +#define PEN 0x08 /* Parity Enable */ +#define EPS 0x10 /* Even Parity Select */ +#define STP 0x20 /* Stick Parity */ +#define SB 0x40 /* Set Break */ +#define DLAB 0x80 /* Divisor Latch Access */ + +/* UARTx_MCR Mask */ +#define LOOP_ENA 0x10 /* Loopback Mode Enable */ +#define LOOP_ENA_P 0x04 + +/* UARTx_LSR Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x40 /* TSR and UART_THR Empty */ + +/* UARTx_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ + +/* UARTx_IIR Masks */ +#define NINT 0x01 /* Pending Interrupt */ +#define IIR_TX_READY 0x02 /* UART_THR empty */ +#define IIR_RX_READY 0x04 /* Receive data ready */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */ + +/* UARTx_GCTL Masks */ +#define UCEN 0x01 /* Enable UARTx Clocks */ +#define IREN 0x02 /* Enable IrDA Mode */ +#define TPOLC 0x04 /* IrDA TX Polarity Change */ +#define RPOLC 0x08 /* IrDA RX Polarity Change */ +#define FPE 0x10 /* Force Parity Error On Transmit */ +#define FFE 0x20 /* Force Framing Error On Transmit */ + + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/ +/* SPI_CTL Masks */ +#define TIMOD 0x0003 /* Transfer Initiate Mode */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ +#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ +#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ +#define PSSE 0x0010 /* Slave-Select Input Enable */ +#define EMISO 0x0020 /* Enable MISO As Output */ +#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ +#define LSBF 0x0200 /* LSB First */ +#define CPHA 0x0400 /* Clock Phase */ +#define CPOL 0x0800 /* Clock Polarity */ +#define MSTR 0x1000 /* Master/Slave* */ +#define WOM 0x2000 /* Write Open Drain Master */ +#define SPE 0x4000 /* SPI Enable */ + +/* SPI_FLG Masks */ +#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ +#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ +#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ +#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ +#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ +#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ +#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ +#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ + +/* SPI_STAT Masks */ +#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ +#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ +#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ +#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ +#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ +#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ +#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ + + +/* **************** GENERAL PURPOSE TIMER MASKS **********************/ +/* TIMER_ENABLE Masks */ +#define TIMEN0 0x0001 /* Enable Timer 0 */ +#define TIMEN1 0x0002 /* Enable Timer 1 */ +#define TIMEN2 0x0004 /* Enable Timer 2 */ +#define TIMEN3 0x0008 /* Enable Timer 3 */ +#define TIMEN4 0x0010 /* Enable Timer 4 */ +#define TIMEN5 0x0020 /* Enable Timer 5 */ +#define TIMEN6 0x0040 /* Enable Timer 6 */ +#define TIMEN7 0x0080 /* Enable Timer 7 */ + +/* TIMER_DISABLE Masks */ +#define TIMDIS0 TIMEN0 /* Disable Timer 0 */ +#define TIMDIS1 TIMEN1 /* Disable Timer 1 */ +#define TIMDIS2 TIMEN2 /* Disable Timer 2 */ +#define TIMDIS3 TIMEN3 /* Disable Timer 3 */ +#define TIMDIS4 TIMEN4 /* Disable Timer 4 */ +#define TIMDIS5 TIMEN5 /* Disable Timer 5 */ +#define TIMDIS6 TIMEN6 /* Disable Timer 6 */ +#define TIMDIS7 TIMEN7 /* Disable Timer 7 */ + +/* TIMER_STATUS Masks */ +#define TIMIL0 0x00000001 /* Timer 0 Interrupt */ +#define TIMIL1 0x00000002 /* Timer 1 Interrupt */ +#define TIMIL2 0x00000004 /* Timer 2 Interrupt */ +#define TIMIL3 0x00000008 /* Timer 3 Interrupt */ +#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ +#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */ +#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ +#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ +#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ +#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */ +#define TIMIL4 0x00010000 /* Timer 4 Interrupt */ +#define TIMIL5 0x00020000 /* Timer 5 Interrupt */ +#define TIMIL6 0x00040000 /* Timer 6 Interrupt */ +#define TIMIL7 0x00080000 /* Timer 7 Interrupt */ +#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */ +#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */ +#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */ +#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */ +#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ +#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ +#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ +#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR3 TOVF_ERR3 +#define TOVL_ERR4 TOVF_ERR4 +#define TOVL_ERR5 TOVF_ERR5 +#define TOVL_ERR6 TOVF_ERR6 +#define TOVL_ERR7 TOVF_ERR7 + +/* TIMERx_CONFIG Masks */ +#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ +#define WDTH_CAP 0x0002 /* Width Capture Input Mode */ +#define EXT_CLK 0x0003 /* External Clock Mode */ +#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ +#define PERIOD_CNT 0x0008 /* Period Count */ +#define IRQ_ENA 0x0010 /* Interrupt Request Enable */ +#define TIN_SEL 0x0020 /* Timer Input Select */ +#define OUT_DIS 0x0040 /* Output Pad Disable */ +#define CLK_SEL 0x0080 /* Timer Clock Select */ +#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ +#define EMU_RUN 0x0200 /* Emulation Behavior Select */ +#define ERR_TYP 0xC000 /* Error Type */ + + +/* ****************** GPIO PORTS F, G, H MASKS ***********************/ +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +/* Port F Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* Port G Masks */ +#define PG0 0x0001 +#define PG1 0x0002 +#define PG2 0x0004 +#define PG3 0x0008 +#define PG4 0x0010 +#define PG5 0x0020 +#define PG6 0x0040 +#define PG7 0x0080 +#define PG8 0x0100 +#define PG9 0x0200 +#define PG10 0x0400 +#define PG11 0x0800 +#define PG12 0x1000 +#define PG13 0x2000 +#define PG14 0x4000 +#define PG15 0x8000 + +/* Port H Masks */ +#define PH0 0x0001 +#define PH1 0x0002 +#define PH2 0x0004 +#define PH3 0x0008 +#define PH4 0x0010 +#define PH5 0x0020 +#define PH6 0x0040 +#define PH7 0x0080 +#define PH8 0x0100 +#define PH9 0x0200 +#define PH10 0x0400 +#define PH11 0x0800 +#define PH12 0x1000 +#define PH13 0x2000 +#define PH14 0x4000 +#define PH15 0x8000 + + +/* ******************* SERIAL PORT MASKS **************************************/ +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* Transmit Enable */ +#define ITCLK 0x0002 /* Internal Transmit Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* Transmit Bit Order */ +#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ +#define TFSR 0x0400 /* Transmit Frame Sync Required Select */ +#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ +#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ +#define LATFS 0x2000 /* Late Transmit Frame Sync Select */ +#define TCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks and Macro */ +#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* Receive Enable */ +#define IRCLK 0x0002 /* Internal Receive Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define RLSBIT 0x0010 /* Receive Bit Order */ +#define IRFS 0x0200 /* Internal Receive Frame Sync Select */ +#define RFSR 0x0400 /* Receive Frame Sync Required Select */ +#define LRFS 0x1000 /* Low Receive Frame Sync Select */ +#define LARFS 0x2000 /* Late Receive Frame Sync Select */ +#define RCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* Receive FIFO Not Empty Status */ +#define RUVF 0x0002 /* Sticky Receive Underflow Status */ +#define ROVF 0x0004 /* Sticky Receive Overflow Status */ +#define TXF 0x0008 /* Transmit FIFO Full Status */ +#define TUVF 0x0010 /* Sticky Transmit Underflow Status */ +#define TOVF 0x0020 /* Sticky Transmit Overflow Status */ +#define TXHRE 0x0040 /* Transmit Hold Register Empty */ + +/* SPORTx_MCMC1 Macros */ +#define SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ + +/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ + +/* SPORTx_MCMC2 Masks */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ + + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ +/* EBIU_AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x0000 /* All Banks Disabled */ +#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ + +/* EBIU_AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */ +#define B0RDYPOL 0x00000002 /* B0 RDY Active High */ +#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */ +#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */ +#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */ +#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */ +#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */ + +#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */ +#define B1RDYPOL 0x00020000 /* B1 RDY Active High */ +#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */ +#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */ +#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */ +#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */ +#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */ + +/* EBIU_AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */ +#define B2RDYPOL 0x00000002 /* B2 RDY Active High */ +#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */ +#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */ +#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */ +#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */ +#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */ + +#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */ +#define B3RDYPOL 0x00020000 /* B3 RDY Active High */ +#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */ +#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */ +#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */ +#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */ +#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */ + + +/* ********************** SDRAM CONTROLLER MASKS **********************************************/ +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SDRAM Signals */ +#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */ +#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */ +#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */ +#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */ +#define EBUFE 0x02000000 /* Enable External Buffering Timing */ +#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */ +#define EMREN 0x10000000 /* Extended Mode Register Enable */ +#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */ +#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x0001 /* Enable SDRAM External Bank */ +#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */ +#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ +#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ +#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ +#define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */ +#define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */ +#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ +#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ +#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ +#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x0001 /* SDRAM Controller Idle */ +#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */ +#define SDPUA 0x0004 /* SDRAM Power-Up Active */ +#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */ +#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */ +#define BGSTAT 0x0020 /* Bus Grant Status */ + + +/* ************************** DMA CONTROLLER MASKS ********************************/ +/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x0001 /* DMA Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ +#define RESTART 0x0020 /* DMA Buffer Clear */ +#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x0900 /* Next Descriptor Size */ +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ +#define PMAP 0xF000 /* Peripheral Mapped To This Channel */ +#define PMAP_PPI 0x0000 /* PPI Port DMA */ +#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */ +#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */ +#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */ +#define PMAP_SPI 0x7000 /* SPI Port DMA */ +#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */ +#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */ +#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ +#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + + +/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ +/* PPI_CONTROL Masks */ +#define PORT_EN 0x0001 /* PPI Port Enable */ +#define PORT_DIR 0x0002 /* PPI Port Direction */ +#define XFR_TYPE 0x000C /* PPI Transfer Type */ +#define PORT_CFG 0x0030 /* PPI Port Configuration */ +#define FLD_SEL 0x0040 /* PPI Active Field Select */ +#define PACK_EN 0x0080 /* PPI Packing Mode */ +#define DMA32 0x0100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ +#define DLEN_8 0x0000 /* Data Length = 8 Bits */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#define DLENGTH 0x3800 /* PPI Data Length */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ + +/* PPI_STATUS Masks */ +#define FLD 0x0400 /* Field Indicator */ +#define FT_ERR 0x0800 /* Frame Track Error */ +#define OVR 0x1000 /* FIFO Overflow Error */ +#define UNDR 0x2000 /* FIFO Underrun Error */ +#define ERR_DET 0x4000 /* Error Detected Indicator */ +#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ + + +/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ +/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ + +/* TWI_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWI_SLAVE_CTRL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Adrress Matching Enabled */ + +/* TWI_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWI_MASTER_CTRL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWI_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWI_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWI_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + + +/* Omit CAN masks from defBF534.h */ + +/* ******************* PIN CONTROL REGISTER MASKS ************************/ +/* PORT_MUX Masks */ +#define PJSE 0x0001 /* Port J SPI/SPORT Enable */ +#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */ +#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */ + +#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */ +#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */ +#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */ +#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ + +#define PFDE 0x0008 /* Port F DMA Request Enable */ +#define PFDE_UART 0x0000 /* Enable UART0 RX/TX */ +#define PFDE_DMA 0x0008 /* Enable DMAR1:0 */ + +#define PFTE 0x0010 /* Port F Timer Enable */ +#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ +#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */ + +#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */ +#define PFS6E_TIMER 0x0000 /* Enable TMR5 */ +#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */ + +#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */ +#define PFS5E_TIMER 0x0000 /* Enable TMR4 */ +#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */ + +#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */ +#define PFS4E_TIMER 0x0000 /* Enable TMR3 */ +#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */ + +#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */ +#define PFFE_TIMER 0x0000 /* Enable TMR2 */ +#define PFFE_PPI 0x0100 /* Enable PPI FS3 */ + +#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */ +#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */ +#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */ + +#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */ +#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */ +#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */ + +#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */ +#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ +#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ + + +/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/ +/* HDMAx_CTL Masks */ +#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */ +#define REP 0x0002 /* HDMA Request Polarity */ +#define UTE 0x0004 /* Urgency Threshold Enable */ +#define OIE 0x0010 /* Overflow Interrupt Enable */ +#define BDIE 0x0020 /* Block Done Interrupt Enable */ +#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */ +#define DRQ 0x0300 /* HDMA Request Type */ +#define DRQ_NONE 0x0000 /* No Request */ +#define DRQ_SINGLE 0x0100 /* Channels Request Single */ +#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */ +#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */ +#define RBC 0x1000 /* Reload BCNT With IBCNT */ +#define PS 0x2000 /* HDMA Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* entry addresses of the user-callable Boot ROM functions */ + +#define _BOOTROM_RESET 0xEF000000 +#define _BOOTROM_FINAL_INIT 0xEF000002 +#define _BOOTROM_DO_MEMORY_DMA 0xEF000006 +#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 +#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A +#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C +#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 +#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 +#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define PGDE_UART PFDE_UART +#define PGDE_DMA PFDE_DMA +#define CKELOW SCKELOW + +/* ==== end from defBF534.h ==== */ + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03400 /* HOST Control Register */ +#define HOST_STATUS 0xffc03404 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03408 /* HOST Acknowledge Mode Timeout Register */ + +/* Counter Registers */ + +#define CNT_CONFIG 0xffc03500 /* Configuration Register */ +#define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */ +#define CNT_STATUS 0xffc03508 /* Status Register */ +#define CNT_COMMAND 0xffc0350c /* Command Register */ +#define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */ +#define CNT_COUNTER 0xffc03514 /* Counter Register */ +#define CNT_MAX 0xffc03518 /* Maximal Count Register */ +#define CNT_MIN 0xffc0351c /* Minimal Count Register */ + +/* OTP/FUSE Registers */ + +#define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */ +#define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */ +#define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */ +#define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */ + +/* Security Registers */ + +#define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */ +#define SECURE_CONTROL 0xffc03624 /* Secure Control */ +#define SECURE_STATUS 0xffc03628 /* Secure Status */ + +/* OTP Read/Write Data Buffer Registers */ + +#define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ + +/* NFC Registers */ + +#define NFC_CTL 0xffc03700 /* NAND Control Register */ +#define NFC_STAT 0xffc03704 /* NAND Status Register */ +#define NFC_IRQSTAT 0xffc03708 /* NAND Interrupt Status Register */ +#define NFC_IRQMASK 0xffc0370c /* NAND Interrupt Mask Register */ +#define NFC_ECC0 0xffc03710 /* NAND ECC Register 0 */ +#define NFC_ECC1 0xffc03714 /* NAND ECC Register 1 */ +#define NFC_ECC2 0xffc03718 /* NAND ECC Register 2 */ +#define NFC_ECC3 0xffc0371c /* NAND ECC Register 3 */ +#define NFC_COUNT 0xffc03720 /* NAND ECC Count Register */ +#define NFC_RST 0xffc03724 /* NAND ECC Reset Register */ +#define NFC_PGCTL 0xffc03728 /* NAND Page Control Register */ +#define NFC_READ 0xffc0372c /* NAND Read Data Register */ +#define NFC_ADDR 0xffc03740 /* NAND Address Register */ +#define NFC_CMD 0xffc03744 /* NAND Command Register */ +#define NFC_DATA_WR 0xffc03748 /* NAND Data Write Register */ +#define NFC_DATA_RD 0xffc0374c /* NAND Data Read Register */ + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */ +#define HOST_CNTR_nHOST_EN 0x0 +#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */ +#define HOST_CNTR_nHOST_END 0x0 +#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */ +#define HOST_CNTR_nDATA_SIZE 0x0 +#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */ +#define HOST_CNTR_nHOST_RST 0x0 +#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */ +#define HOST_CNTR_nHRDY_OVR 0x0 +#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */ +#define HOST_CNTR_nINT_MODE 0x0 +#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */ +#define HOST_CNTR_ nBT_EN 0x0 +#define HOST_CNTR_EHW 0x100 /* Enable Host Write */ +#define HOST_CNTR_nEHW 0x0 +#define HOST_CNTR_EHR 0x200 /* Enable Host Read */ +#define HOST_CNTR_nEHR 0x0 +#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */ +#define HOST_CNTR_nBDR 0x0 + +/* Bit masks for HOST_STATUS */ + +#define HOST_STAT_READY 0x1 /* DMA Ready */ +#define HOST_STAT_nREADY 0x0 +#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */ +#define HOST_STAT_nFIFOFULL 0x0 +#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */ +#define HOST_STAT_nFIFOEMPTY 0x0 +#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */ +#define HOST_STAT_nCOMPLETE 0x0 +#define HOST_STAT_HSHK 0x10 /* Host Handshake */ +#define HOST_STAT_nHSHK 0x0 +#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */ +#define HOST_STAT_nTIMEOUT 0x0 +#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */ +#define HOST_STAT_nHIRQ 0x0 +#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define HOST_STAT_nALLOW_CNFG 0x0 +#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */ +#define HOST_STAT_nDMA_DIR 0x0 +#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */ +#define HOST_STAT_nBTE 0x0 +#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */ +#define HOST_STAT_nHOSTRD_DONE 0x0 + +/* Bit masks for HOST_TIMEOUT */ + +#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for CNT_CONFIG */ + +#define CNTE 0x1 /* Counter Enable */ +#define nCNTE 0x0 +#define DEBE 0x2 /* Debounce Enable */ +#define nDEBE 0x0 +#define CDGINV 0x10 /* CDG Pin Polarity Invert */ +#define nCDGINV 0x0 +#define CUDINV 0x20 /* CUD Pin Polarity Invert */ +#define nCUDINV 0x0 +#define CZMINV 0x40 /* CZM Pin Polarity Invert */ +#define nCZMINV 0x0 +#define CNTMODE 0x700 /* Counter Operating Mode */ +#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ +#define nZMZC 0x0 +#define BNDMODE 0x3000 /* Boundary register Mode */ +#define INPDIS 0x8000 /* CUG and CDG Input Disable */ +#define nINPDIS 0x0 + +/* Bit masks for CNT_IMASK */ + +#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ +#define nICIE 0x0 +#define UCIE 0x2 /* Up count Interrupt Enable */ +#define nUCIE 0x0 +#define DCIE 0x4 /* Down count Interrupt Enable */ +#define nDCIE 0x0 +#define MINCIE 0x8 /* Min Count Interrupt Enable */ +#define nMINCIE 0x0 +#define MAXCIE 0x10 /* Max Count Interrupt Enable */ +#define nMAXCIE 0x0 +#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ +#define nCOV31IE 0x0 +#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ +#define nCOV15IE 0x0 +#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ +#define nCZEROIE 0x0 +#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ +#define nCZMIE 0x0 +#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ +#define nCZMEIE 0x0 +#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ +#define nCZMZIE 0x0 + +/* Bit masks for CNT_STATUS */ + +#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ +#define nICII 0x0 +#define UCII 0x2 /* Up count Interrupt Identifier */ +#define nUCII 0x0 +#define DCII 0x4 /* Down count Interrupt Identifier */ +#define nDCII 0x0 +#define MINCII 0x8 /* Min Count Interrupt Identifier */ +#define nMINCII 0x0 +#define MAXCII 0x10 /* Max Count Interrupt Identifier */ +#define nMAXCII 0x0 +#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ +#define nCOV31II 0x0 +#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ +#define nCOV15II 0x0 +#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ +#define nCZEROII 0x0 +#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ +#define nCZMII 0x0 +#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ +#define nCZMEII 0x0 +#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ +#define nCZMZII 0x0 + +/* Bit masks for CNT_COMMAND */ + +#define W1LCNT 0xf /* Load Counter Register */ +#define W1LMIN 0xf0 /* Load Min Register */ +#define W1LMAX 0xf00 /* Load Max Register */ +#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ +#define nW1ZMONCE 0x0 + +/* Bit masks for CNT_DEBOUNCE */ + +#define DPRESCALE 0xf /* Load Counter Register */ + +/* Bit masks for OTP_CONTROL */ + +#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ +#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ +#define nFIEN 0x0 +#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ +#define nFTESTDEC 0x0 +#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ +#define nFWRTEST 0x0 +#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ +#define nFRDEN 0x0 +#define FWREN 0x8000 /* OTP/Fuse Write Enable */ +#define nFWREN 0x0 + +/* Bit masks for OTP_BEN */ + +#define FBEN 0xffff /* OTP/Fuse Byte Enable */ + +/* Bit masks for OTP_STATUS */ + +#define FCOMP 0x1 /* OTP/Fuse Access Complete */ +#define nFCOMP 0x0 +#define FERROR 0x2 /* OTP/Fuse Access Error */ +#define nFERROR 0x0 +#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ +#define nMMRGLOAD 0x0 +#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ +#define nMMRGLOCK 0x0 +#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ +#define nFPGMEN 0x0 + +/* Bit masks for OTP_TIMING */ + +#define USECDIV 0xff /* Micro Second Divider */ +#define READACC 0x7f00 /* Read Access Time */ +#define CPUMPRL 0x38000 /* Charge Pump Release Time */ +#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ +#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ +#define PGMTIME 0xff000000 /* Program Time */ + +/* Bit masks for SECURE_SYSSWT */ + +#define EMUDABL 0x1 /* Emulation Disable. */ +#define nEMUDABL 0x0 +#define RSTDABL 0x2 /* Reset Disable */ +#define nRSTDABL 0x0 +#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */ +#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */ +#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */ +#define DMA0OVR 0x800 /* DMA0 Memory Access Override */ +#define nDMA0OVR 0x0 +#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */ +#define nDMA1OVR 0x0 +#define EMUOVR 0x4000 /* Emulation Override */ +#define nEMUOVR 0x0 +#define OTPSEN 0x8000 /* OTP Secrets Enable. */ +#define nOTPSEN 0x0 +#define L2DABL 0x70000 /* L2 Memory Disable. */ + +/* Bit masks for SECURE_CONTROL */ + +#define SECURE0 0x1 /* SECURE 0 */ +#define nSECURE0 0x0 +#define SECURE1 0x2 /* SECURE 1 */ +#define nSECURE1 0x0 +#define SECURE2 0x4 /* SECURE 2 */ +#define nSECURE2 0x0 +#define SECURE3 0x8 /* SECURE 3 */ +#define nSECURE3 0x0 + +/* Bit masks for SECURE_STATUS */ + +#define SECMODE 0x3 /* Secured Mode Control State */ +#define NMI 0x4 /* Non Maskable Interrupt */ +#define nNMI 0x0 +#define AFVALID 0x8 /* Authentication Firmware Valid */ +#define nAFVALID 0x0 +#define AFEXIT 0x10 /* Authentication Firmware Exit */ +#define nAFEXIT 0x0 +#define SECSTAT 0xe0 /* Secure Status */ + +/* Bit masks for NFC_CTL */ + +#define WR_DLY 0xf /* Write Strobe Delay */ +#define RD_DLY 0xf0 /* Read Strobe Delay */ +#define NWIDTH 0x100 /* NAND Data Width */ +#define nNWIDTH 0x0 +#define PG_SIZE 0x200 /* Page Size */ +#define nPG_SIZE 0x0 + +/* Bit masks for NFC_STAT */ + +#define NBUSY 0x1 /* Not Busy */ +#define nNBUSY 0x0 +#define WB_FULL 0x2 /* Write Buffer Full */ +#define nWB_FULL 0x0 +#define PG_WR_STAT 0x4 /* Page Write Pending */ +#define nPG_WR_STAT 0x0 +#define PG_RD_STAT 0x8 /* Page Read Pending */ +#define nPG_RD_STAT 0x0 +#define WB_EMPTY 0x10 /* Write Buffer Empty */ +#define nWB_EMPTY 0x0 + +/* Bit masks for NFC_IRQSTAT */ + +#define NBUSYIRQ 0x1 /* Not Busy IRQ */ +#define nNBUSYIRQ 0x0 +#define WB_OVF 0x2 /* Write Buffer Overflow */ +#define nWB_OVF 0x0 +#define WB_EDGE 0x4 /* Write Buffer Edge Detect */ +#define nWB_EDGE 0x0 +#define RD_RDY 0x8 /* Read Data Ready */ +#define nRD_RDY 0x0 +#define WR_DONE 0x10 /* Page Write Done */ +#define nWR_DONE 0x0 + +/* Bit masks for NFC_IRQMASK */ + +#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ +#define nMASK_BUSYIRQ 0x0 +#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ +#define nMASK_WBOVF 0x0 +#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ +#define nMASK_WBEMPTY 0x0 +#define MASK_RDRDY 0x8 /* Mask Read Data Ready */ +#define nMASK_RDRDY 0x0 +#define MASK_WRDONE 0x10 /* Mask Write Done */ +#define nMASK_WRDONE 0x0 + +/* Bit masks for NFC_RST */ + +#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ +#define nECC_RST 0x0 + +/* Bit masks for NFC_PGCTL */ + +#define PG_RD_START 0x1 /* Page Read Start */ +#define nPG_RD_START 0x0 +#define PG_WR_START 0x2 /* Page Write Start */ +#define nPG_WR_START 0x0 + +/* Bit masks for NFC_ECC0 */ + +#define ECC0 0x7ff /* Parity Calculation Result0 */ + +/* Bit masks for NFC_ECC1 */ + +#define ECC1 0x7ff /* Parity Calculation Result1 */ + +/* Bit masks for NFC_ECC2 */ + +#define ECC2 0x7ff /* Parity Calculation Result2 */ + +/* Bit masks for NFC_ECC3 */ + +#define ECC3 0x7ff /* Parity Calculation Result3 */ + +/* Bit masks for NFC_COUNT */ + +#define ECCCNT 0x3ff /* Transfer Count */ + + +#endif /* _DEF_BF52X_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/dma.h b/arch/blackfin/mach-bf527/include/mach/dma.h new file mode 100644 index 00000000000..49dd693223e --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/dma.h @@ -0,0 +1,62 @@ +/* + * file: include/asm-blackfin/mach-bf527/dma.h + * based on: include/asm-blackfin/mach-bf537/dma.h + * author: Michael Hennerich (michael.hennerich@analog.com) + * + * created: + * description: + * system DMA map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define MAX_BLACKFIN_DMA_CHANNEL 16 + +#define CH_PPI 0 /* PPI receive/transmit or NFC */ +#define CH_EMAC_RX 1 /* Ethernet MAC receive or HOSTDP */ +#define CH_EMAC_HOSTDP 1 /* Ethernet MAC receive or HOSTDP */ +#define CH_EMAC_TX 2 /* Ethernet MAC transmit or NFC */ +#define CH_SPORT0_RX 3 /* SPORT0 receive */ +#define CH_SPORT0_TX 4 /* SPORT0 transmit */ +#define CH_SPORT1_RX 5 /* SPORT1 receive */ +#define CH_SPORT1_TX 6 /* SPORT1 transmit */ +#define CH_SPI 7 /* SPI transmit/receive */ +#define CH_UART0_RX 8 /* UART0 receive */ +#define CH_UART0_TX 9 /* UART0 transmit */ +#define CH_UART1_RX 10 /* UART1 receive */ +#define CH_UART1_TX 11 /* UART1 transmit */ + +#define CH_MEM_STREAM0_DEST 12 /* TX */ +#define CH_MEM_STREAM0_SRC 13 /* RX */ +#define CH_MEM_STREAM1_DEST 14 /* TX */ +#define CH_MEM_STREAM1_SRC 15 /* RX */ + +#if defined(CONFIG_BF527_NAND_D_PORTF) +#define CH_NFC CH_PPI /* PPI receive/transmit or NFC */ +#elif defined(CONFIG_BF527_NAND_D_PORTH) +#define CH_NFC CH_EMAC_TX /* PPI receive/transmit or NFC */ +#endif + +#endif diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h new file mode 100644 index 00000000000..4e2b3f2020e --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/irq.h @@ -0,0 +1,259 @@ +/* + * file: include/asm-blackfin/mach-bf527/irq.h + * based on: include/asm-blackfin/mach-bf537/irq.h + * author: Michael Hennerich (michael.hennerich@analog.com) + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _BF527_IRQ_H_ +#define _BF527_IRQ_H_ + +/* + * Interrupt source definitions + Event Source Core Event Name + Core Emulation ** + Events (highest priority) EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + + ..... + + Software Interrupt 1 IVG14 31 + Software Interrupt 2 -- + (lowest priority) IVG15 32 * +*/ + +#define NR_PERI_INTS (2 * 32) + +/* The ABSTRACT IRQ definitions */ +/** the first seven of the following are fixed, the rest you change if you need to **/ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define BFIN_IRQ(x) ((x) + 7) + +#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ +#define IRQ_DMA0_ERROR BFIN_IRQ(1) /* DMA Error 0 (generic) */ +#define IRQ_DMAR0_BLK BFIN_IRQ(2) /* DMAR0 Block Interrupt */ +#define IRQ_DMAR1_BLK BFIN_IRQ(3) /* DMAR1 Block Interrupt */ +#define IRQ_DMAR0_OVR BFIN_IRQ(4) /* DMAR0 Overflow Error */ +#define IRQ_DMAR1_OVR BFIN_IRQ(5) /* DMAR1 Overflow Error */ +#define IRQ_PPI_ERROR BFIN_IRQ(6) /* PPI Error */ +#define IRQ_MAC_ERROR BFIN_IRQ(7) /* MAC Status */ +#define IRQ_SPORT0_ERROR BFIN_IRQ(8) /* SPORT0 Status */ +#define IRQ_SPORT1_ERROR BFIN_IRQ(9) /* SPORT1 Status */ +#define IRQ_UART0_ERROR BFIN_IRQ(12) /* UART0 Status */ +#define IRQ_UART1_ERROR BFIN_IRQ(13) /* UART1 Status */ +#define IRQ_RTC BFIN_IRQ(14) /* RTC */ +#define IRQ_PPI BFIN_IRQ(15) /* DMA Channel 0 (PPI/NAND) */ +#define IRQ_SPORT0_RX BFIN_IRQ(16) /* DMA 3 Channel (SPORT0 RX) */ +#define IRQ_SPORT0_TX BFIN_IRQ(17) /* DMA 4 Channel (SPORT0 TX) */ +#define IRQ_SPORT1_RX BFIN_IRQ(18) /* DMA 5 Channel (SPORT1 RX) */ +#define IRQ_SPORT1_TX BFIN_IRQ(19) /* DMA 6 Channel (SPORT1 TX) */ +#define IRQ_TWI BFIN_IRQ(20) /* TWI */ +#define IRQ_SPI BFIN_IRQ(21) /* DMA 7 Channel (SPI) */ +#define IRQ_UART0_RX BFIN_IRQ(22) /* DMA8 Channel (UART0 RX) */ +#define IRQ_UART0_TX BFIN_IRQ(23) /* DMA9 Channel (UART0 TX) */ +#define IRQ_UART1_RX BFIN_IRQ(24) /* DMA10 Channel (UART1 RX) */ +#define IRQ_UART1_TX BFIN_IRQ(25) /* DMA11 Channel (UART1 TX) */ +#define IRQ_OPTSEC BFIN_IRQ(26) /* OTPSEC Interrupt */ +#define IRQ_CNT BFIN_IRQ(27) /* GP Counter */ +#define IRQ_MAC_RX BFIN_IRQ(28) /* DMA1 Channel (MAC RX/HDMA) */ +#define IRQ_PORTH_INTA BFIN_IRQ(29) /* Port H Interrupt A */ +#define IRQ_MAC_TX BFIN_IRQ(30) /* DMA2 Channel (MAC TX/NAND) */ +#define IRQ_NFC BFIN_IRQ(30) /* DMA2 Channel (MAC TX/NAND) */ +#define IRQ_PORTH_INTB BFIN_IRQ(31) /* Port H Interrupt B */ +#define IRQ_TMR0 BFIN_IRQ(32) /* Timer 0 */ +#define IRQ_TMR1 BFIN_IRQ(33) /* Timer 1 */ +#define IRQ_TMR2 BFIN_IRQ(34) /* Timer 2 */ +#define IRQ_TMR3 BFIN_IRQ(35) /* Timer 3 */ +#define IRQ_TMR4 BFIN_IRQ(36) /* Timer 4 */ +#define IRQ_TMR5 BFIN_IRQ(37) /* Timer 5 */ +#define IRQ_TMR6 BFIN_IRQ(38) /* Timer 6 */ +#define IRQ_TMR7 BFIN_IRQ(39) /* Timer 7 */ +#define IRQ_PORTG_INTA BFIN_IRQ(40) /* Port G Interrupt A */ +#define IRQ_PORTG_INTB BFIN_IRQ(41) /* Port G Interrupt B */ +#define IRQ_MEM_DMA0 BFIN_IRQ(42) /* MDMA Stream 0 */ +#define IRQ_MEM_DMA1 BFIN_IRQ(43) /* MDMA Stream 1 */ +#define IRQ_WATCH BFIN_IRQ(44) /* Software Watchdog Timer */ +#define IRQ_PORTF_INTA BFIN_IRQ(45) /* Port F Interrupt A */ +#define IRQ_PORTF_INTB BFIN_IRQ(46) /* Port F Interrupt B */ +#define IRQ_SPI_ERROR BFIN_IRQ(47) /* SPI Status */ +#define IRQ_NFC_ERROR BFIN_IRQ(48) /* NAND Error */ +#define IRQ_HDMA_ERROR BFIN_IRQ(49) /* HDMA Error */ +#define IRQ_HDMA BFIN_IRQ(50) /* HDMA (TFI) */ +#define IRQ_USB_EINT BFIN_IRQ(51) /* USB_EINT Interrupt */ +#define IRQ_USB_INT0 BFIN_IRQ(52) /* USB_INT0 Interrupt */ +#define IRQ_USB_INT1 BFIN_IRQ(53) /* USB_INT1 Interrupt */ +#define IRQ_USB_INT2 BFIN_IRQ(54) /* USB_INT2 Interrupt */ +#define IRQ_USB_DMA BFIN_IRQ(55) /* USB_DMAINT Interrupt */ + +#define SYS_IRQS BFIN_IRQ(63) /* 70 */ + +#define IRQ_PF0 71 +#define IRQ_PF1 72 +#define IRQ_PF2 73 +#define IRQ_PF3 74 +#define IRQ_PF4 75 +#define IRQ_PF5 76 +#define IRQ_PF6 77 +#define IRQ_PF7 78 +#define IRQ_PF8 79 +#define IRQ_PF9 80 +#define IRQ_PF10 81 +#define IRQ_PF11 82 +#define IRQ_PF12 83 +#define IRQ_PF13 84 +#define IRQ_PF14 85 +#define IRQ_PF15 86 + +#define IRQ_PG0 87 +#define IRQ_PG1 88 +#define IRQ_PG2 89 +#define IRQ_PG3 90 +#define IRQ_PG4 91 +#define IRQ_PG5 92 +#define IRQ_PG6 93 +#define IRQ_PG7 94 +#define IRQ_PG8 95 +#define IRQ_PG9 96 +#define IRQ_PG10 97 +#define IRQ_PG11 98 +#define IRQ_PG12 99 +#define IRQ_PG13 100 +#define IRQ_PG14 101 +#define IRQ_PG15 102 + +#define IRQ_PH0 103 +#define IRQ_PH1 104 +#define IRQ_PH2 105 +#define IRQ_PH3 106 +#define IRQ_PH4 107 +#define IRQ_PH5 108 +#define IRQ_PH6 109 +#define IRQ_PH7 110 +#define IRQ_PH8 111 +#define IRQ_PH9 112 +#define IRQ_PH10 113 +#define IRQ_PH11 114 +#define IRQ_PH12 115 +#define IRQ_PH13 116 +#define IRQ_PH14 117 +#define IRQ_PH15 118 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define NR_IRQS (IRQ_PH15+1) + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* IAR0 BIT FIELDS */ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMA0_ERROR_POS 4 +#define IRQ_DMAR0_BLK_POS 8 +#define IRQ_DMAR1_BLK_POS 12 +#define IRQ_DMAR0_OVR_POS 16 +#define IRQ_DMAR1_OVR_POS 20 +#define IRQ_PPI_ERROR_POS 24 +#define IRQ_MAC_ERROR_POS 28 + +/* IAR1 BIT FIELDS */ +#define IRQ_SPORT0_ERROR_POS 0 +#define IRQ_SPORT1_ERROR_POS 4 +#define IRQ_UART0_ERROR_POS 16 +#define IRQ_UART1_ERROR_POS 20 +#define IRQ_RTC_POS 24 +#define IRQ_PPI_POS 28 + +/* IAR2 BIT FIELDS */ +#define IRQ_SPORT0_RX_POS 0 +#define IRQ_SPORT0_TX_POS 4 +#define IRQ_SPORT1_RX_POS 8 +#define IRQ_SPORT1_TX_POS 12 +#define IRQ_TWI_POS 16 +#define IRQ_SPI_POS 20 +#define IRQ_UART0_RX_POS 24 +#define IRQ_UART0_TX_POS 28 + +/* IAR3 BIT FIELDS */ +#define IRQ_UART1_RX_POS 0 +#define IRQ_UART1_TX_POS 4 +#define IRQ_OPTSEC_POS 8 +#define IRQ_CNT_POS 12 +#define IRQ_MAC_RX_POS 16 +#define IRQ_PORTH_INTA_POS 20 +#define IRQ_MAC_TX_POS 24 +#define IRQ_PORTH_INTB_POS 28 + +/* IAR4 BIT FIELDS */ +#define IRQ_TMR0_POS 0 +#define IRQ_TMR1_POS 4 +#define IRQ_TMR2_POS 8 +#define IRQ_TMR3_POS 12 +#define IRQ_TMR4_POS 16 +#define IRQ_TMR5_POS 20 +#define IRQ_TMR6_POS 24 +#define IRQ_TMR7_POS 28 + +/* IAR5 BIT FIELDS */ +#define IRQ_PORTG_INTA_POS 0 +#define IRQ_PORTG_INTB_POS 4 +#define IRQ_MEM_DMA0_POS 8 +#define IRQ_MEM_DMA1_POS 12 +#define IRQ_WATCH_POS 16 +#define IRQ_PORTF_INTA_POS 20 +#define IRQ_PORTF_INTB_POS 24 +#define IRQ_SPI_ERROR_POS 28 + +/* IAR6 BIT FIELDS */ +#define IRQ_NFC_ERROR_POS 0 +#define IRQ_HDMA_ERROR_POS 4 +#define IRQ_HDMA_POS 8 +#define IRQ_USB_EINT_POS 12 +#define IRQ_USB_INT0_POS 16 +#define IRQ_USB_INT1_POS 20 +#define IRQ_USB_INT2_POS 24 +#define IRQ_USB_DMA_POS 28 + +#endif /* _BF527_IRQ_H_ */ diff --git a/arch/blackfin/mach-bf527/include/mach/mem_init.h b/arch/blackfin/mach-bf527/include/mach/mem_init.h new file mode 100644 index 00000000000..cbe03f4a569 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/mem_init.h @@ -0,0 +1,310 @@ +/* + * File: include/asm-blackfin/mach-bf527/mem_init.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75 || CONFIG_MEM_MT48LC32M16A2TG_75) +#if (CONFIG_SCLK_HZ > 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_7 +#define SDRAM_tRAS_num 7 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_6 +#define SDRAM_tRAS_num 6 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_5 +#define SDRAM_tRAS_num 5 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_2 +#define SDRAM_tRAS_num 2 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ <= 29850746) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_1 +#define SDRAM_tRAS_num 1 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#endif + +#if (CONFIG_MEM_MT48LC16M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC16M8A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC32M8A2_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC64M4A2FB_7E) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) + /*SDRAM INFORMATION: Modify this for your board */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC32M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) + +#if defined CONFIG_CLKIN_HALF +#define CLKIN_HALF 1 +#else +#define CLKIN_HALF 0 +#endif + +#if defined CONFIG_PLL_BYPASS +#define PLL_BYPASS 1 +#else +#define PLL_BYPASS 0 +#endif + +/***************************************Currently Not Being Used *********************************/ +#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) +#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3) +#define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3) +#define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2) +#define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2) +#define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3) +#define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3) +#define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2) +#define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2) +#define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2) +#define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2) +#define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) +#define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) +#define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) +#define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) +#define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) +#define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) +#define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) +#define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) +#define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) +#define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) +#define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) +#define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) +#define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) +#define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) +#define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) +#define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) +#define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) +#define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) +#define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) +#define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) +#define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) +#define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) +#define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) +#define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) +#define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) +#define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) +#define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) +#define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 \ + (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ + flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h new file mode 100644 index 00000000000..ef46dc991cd --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h @@ -0,0 +1,102 @@ +/* + * file: include/asm-blackfin/mach-bf527/mem_map.h + * based on: include/asm-blackfin/mach-bf537/mem_map.h + * author: Michael Hennerich (michael.hennerich@analog.com) + * + * created: + * description: + * Memory MAP Common header file for blackfin BF527/5/2 of processors. + * rev: + * + * modified: + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MEM_MAP_527_H_ +#define _MEM_MAP_527_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x8000 + +/* Level 1 Memory */ + +/* Memory Map for ADSP-BF527 ADSP-BF525 ADSP-BF522 processors */ + +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) +#else +#define BFIN_ICACHESIZE (0*1024) +#endif + +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#define L1_CODE_LENGTH 0xC000 + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE */ + +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + +/* Scratch Pad Memory */ + +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 + +#endif /* _MEM_MAP_527_H_ */ diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h new file mode 100644 index 00000000000..ae4d205bfcf --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/portmux.h @@ -0,0 +1,207 @@ +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0)) + +#if defined(CONFIG_BF527_SPORT0_PORTF) +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +#elif defined(CONFIG_BF527_SPORT0_PORTG) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1)) +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1)) +#if defined(CONFIG_BF527_SPORT0_TSCLK_PG10) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1)) +#elif defined(CONFIG_BF527_SPORT0_TSCLK_PG14) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) +#endif +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) +#endif + +#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) +#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1)) +#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1)) +#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) +#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) + +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2)) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2)) + +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2)) + +#if defined(CONFIG_BF527_UART1_PORTF) +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2)) +#elif defined(CONFIG_BF527_UART1_PORTG) +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1)) +#endif + +#define P_HWAIT (P_DONTCARE) + +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) +/* #define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) */ +#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0)) +#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) +#define P_MDC (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1)) +#define P_RMII0_MDINT (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) +#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) + +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2)) +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(2)) + +#define P_HOST_WR (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2)) +#define P_HOST_ACK (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2)) +#define P_HOST_ADDR (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2)) +#define P_HOST_RD (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2)) +#define P_HOST_CE (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2)) + +#if defined(CONFIG_BF527_NAND_D_PORTF) +#define P_NAND_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2)) +#define P_NAND_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2)) +#define P_NAND_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2)) +#define P_NAND_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2)) +#define P_NAND_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2)) +#define P_NAND_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2)) +#define P_NAND_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2)) +#define P_NAND_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2)) +#elif defined(CONFIG_BF527_NAND_D_PORTH) +#define P_NAND_D0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0)) +#define P_NAND_D1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0)) +#define P_NAND_D2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0)) +#define P_NAND_D3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0)) +#define P_NAND_D4 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0)) +#define P_NAND_D5 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0)) +#define P_NAND_D6 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0)) +#define P_NAND_D7 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0)) +#endif + +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0)) +#define P_NAND_CE (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0)) +#define P_NAND_WE (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0)) +#define P_NAND_RE (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0)) +#define P_NAND_RB (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0)) +#define P_NAND_CLE (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0)) +#define P_NAND_ALE (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0)) + +#define P_HOST_D0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(2)) +#define P_HOST_D1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(2)) +#define P_HOST_D2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2)) +#define P_HOST_D3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2)) +#define P_HOST_D4 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2)) +#define P_HOST_D5 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(2)) +#define P_HOST_D6 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(2)) +#define P_HOST_D7 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(2)) +#define P_HOST_D8 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2)) +#define P_HOST_D9 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(2)) +#define P_HOST_D10 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(2)) +#define P_HOST_D11 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(2)) +#define P_HOST_D12 (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(2)) +#define P_HOST_D13 (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(2)) +#define P_HOST_D14 (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(2)) +#define P_HOST_D15 (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(2)) + +#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1)) +#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(1)) +#define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(1)) +#define P_MII0_ETxD3 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(1)) +#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1)) +#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1)) +#define P_MII0_COL (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1)) +#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1)) +#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(1)) +#define P_MII0_ERxD2 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(1)) +#define P_MII0_ERxD3 (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(1)) +#define P_MII0_ERxDV (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(1)) +#define P_MII0_ERxCLK (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(1)) +#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1)) +#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) +#define P_RMII0_REF_CLK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1)) +#define P_RMII0_CRS_DV (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) +#define P_MDIO (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1)) + +#define P_TWI0_SCL (P_DONTCARE) +#define P_TWI0_SDA (P_DONTCARE) +#define P_PPI0_FS1 (P_DONTCARE) +#define P_TMR0 (P_DONTCARE) +#define P_TMRCLK (P_DONTCARE) +#define P_PPI0_CLK (P_DONTCARE) + +#define P_MII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxD2, \ + P_MII0_ETxD3, \ + P_MII0_ETxEN, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_COL, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxD2, \ + P_MII0_ERxD3, \ + P_MII0_ERxDV, \ + P_MII0_ERxCLK, \ + P_MII0_ERxER, \ + P_MII0_CRS, \ + P_MDC, \ + P_MDIO, 0} + +#define P_RMII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxEN, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxER, \ + P_RMII0_REF_CLK, \ + P_RMII0_MDINT, \ + P_RMII0_CRS_DV, \ + P_MDC, \ + P_MDIO, 0} + +#endif /* _MACH_PORTMUX_H_ */ |