blob: 2e3e7b113c934f829010bfa35a725ae70eebf987 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
|
/**
* Copyright 2011 Freescale Semiconductor
* Author: Mingkai Hu <Mingkai.hu@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This file provides support for the ngPIXIS, a board-specific FPGA used on
* some Freescale reference boards.
*/
/*
* CPLD register set. Feel free to add board-specific #ifdefs where necessary.
*/
typedef struct cpld_data {
u8 cpld_ver; /* 0x0 - CPLD Major Revision Register */
u8 cpld_ver_sub; /* 0x1 - CPLD Minor Revision Register */
u8 pcba_ver; /* 0x2 - PCBA Revision Register */
u8 system_rst; /* 0x3 - system reset register */
u8 res0; /* 0x4 - not used */
u8 sw_ctl_on; /* 0x5 - Switch Control Enable Register */
u8 por_cfg; /* 0x6 - POR Control Register */
u8 switch_strobe; /* 0x7 - Multiplexed pin Select Register */
u8 jtag_sel; /* 0x8 - JTAG or AURORA Selection */
u8 sdbank1_clk; /* 0x9 - SerDes Bank1 Reference clock */
u8 sdbank2_clk; /* 0xa - SerDes Bank2 Reference clock */
u8 fbank_sel; /* 0xb - Flash bank selection */
u8 serdes_mux; /* 0xc - Multiplexed pin Select Register */
u8 sw[1]; /* 0xd - SW2 Status */
u8 system_rst_default; /* 0xe - system reset to default register */
u8 sysclk_sw1; /* 0xf - sysclk configuration register */
} __attribute__ ((packed)) cpld_data_t;
#define SERDES_MUX_LANE_6_MASK 0x2
#define SERDES_MUX_LANE_6_SHIFT 1
#define SERDES_MUX_LANE_A_MASK 0x1
#define SERDES_MUX_LANE_A_SHIFT 0
#define SERDES_MUX_LANE_C_MASK 0x4
#define SERDES_MUX_LANE_C_SHIFT 2
#define SERDES_MUX_LANE_D_MASK 0x8
#define SERDES_MUX_LANE_D_SHIFT 3
#define CPLD_SWITCH_BANK_ENABLE 0x40
#define CPLD_SYSCLK_83 0x1 /* system clock 83.3MHz */
#define CPLD_SYSCLK_100 0x2 /* system clock 100MHz */
/* Pointer to the CPLD register set */
#define cpld ((cpld_data_t *)CPLD_BASE)
/* The CPLD SW register that corresponds to board switch X, where x >= 1 */
#define CPLD_SW(x) (cpld->sw[(x) - 2])
u8 cpld_read(unsigned int reg);
void cpld_write(unsigned int reg, u8 value);
#define CPLD_READ(reg) cpld_read(offsetof(cpld_data_t, reg))
#define CPLD_WRITE(reg, value) cpld_write(offsetof(cpld_data_t, reg), value)
|
