/* * U-boot - psd4256.h * * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA */ /* * Flash A/B Port A configuration registers. * Addresses are offset values to CONFIG_SYS_FLASH1_BASE * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B. */ #define PSD_PORTA_DIN 0x070000 #define PSD_PORTA_DOUT 0x070004 #define PSD_PORTA_DIR 0x070006 /* * Flash A/B Port B configuration registers * Addresses are offset values to CONFIG_SYS_FLASH1_BASE * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B. */ #define PSD_PORTB_DIN 0x070001 #define PSD_PORTB_DOUT 0x070005 #define PSD_PORTB_DIR 0x070007 /* * Flash A Port A Bit definitions */ #define PSDA_PPICLK1 0x20 /* PPI Clock select bit 1 */ #define PSDA_PPICLK0 0x10 /* PPI Clock select bit 0 */ #define PSDA_VDEC_RST 0x08 /* Video decoder reset, 0 = RESET */ #define PSDA_VENC_RST 0x04 /* Video encoder reset, 0 = RESET */ #define PSDA_CODEC_RST 0x01 /* Codec reset, 0 = RESET */ /* * Flash A Port B Bit definitions */ #define PSDA_LED9 0x20 /* LED 9, 1 = LED ON */ #define PSDA_LED8 0x10 /* LED 8, 1 = LED ON */ #define PSDA_LED7 0x08 /* LED 7, 1 = LED ON */ #define PSDA_LED6 0x04 /* LED 6, 1 = LED ON */ #define PSDA_LED5 0x02 /* LED 5, 1 = LED ON */ #define PSDA_LED4 0x01 /* LED 4, 1 = LED ON */