/* * Copyright 2004 Freescale Semiconductor. * Copyright (C) 2003 Motorola Inc. * Xianghua Xiao (x.xiao@motorola.com) * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * PCI Configuration space access support for MPC85xx PCI Bridge */ #include #include #include #if !defined(CONFIG_FSL_PCI_INIT) #ifndef CONFIG_SYS_PCI1_MEM_BUS #define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE #endif #ifndef CONFIG_SYS_PCI1_IO_BUS #define CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_BASE #endif #ifndef CONFIG_SYS_PCI2_MEM_BUS #define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI2_MEM_BASE #endif #ifndef CONFIG_SYS_PCI2_IO_BUS #define CONFIG_SYS_PCI2_IO_BUS CONFIG_SYS_PCI2_IO_BASE #endif static struct pci_controller *pci_hose; void pci_mpc85xx_init(struct pci_controller *board_hose) { u16 reg16; u32 dev; volatile ccsr_pcix_t *pcix = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR); #ifdef CONFIG_MPC85XX_PCI2 volatile ccsr_pcix_t *pcix2 = (void *)(CONFIG_SYS_MPC85xx_PCIX2_ADDR); #endif volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); struct pci_controller * hose; pci_hose = board_hose; hose = &pci_hose[0]; hose->first_busno = 0; hose->last_busno = 0xff; pci_setup_indirect(hose, (CONFIG_SYS_IMMR+0x8000), (CONFIG_SYS_IMMR+0x8004)); /* * Hose scan. */ dev = PCI_BDF(hose->first_busno, 0, 0); pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { /* PCI-X init */ if (CONFIG_SYS_CLK_FREQ < 66000000) printf("PCI-X will only work at 66 MHz\n"); reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16); } pcix->potar1 = (CONFIG_SYS_PCI1_MEM_BUS >> 12) & 0x000fffff; pcix->potear1 = 0x00000000; pcix->powbar1 = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff; pcix->powbear1 = 0x00000000; pcix->powar1 = (POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1)); pcix->potar2 = (CONFIG_SYS_PCI1_IO_BUS >> 12) & 0x000fffff; pcix->potear2 = 0x00000000; pcix->powbar2 = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff; pcix->powbear2 = 0x00000000; pcix->powar2 = (POWAR_EN | POWAR_IO_READ | POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI1_IO_SIZE) - 1)); pcix->pitar1 = 0x00000000; pcix->piwbar1 = 0x00000000; pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G); pcix->powar3 = 0; pcix->powar4 = 0; pcix->piwar2 = 0; pcix->piwar3 = 0; pci_set_region(hose->regions + 0, CONFIG_SYS_PCI1_MEM_BUS, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); pci_set_region(hose->regions + 1, CONFIG_SYS_PCI1_IO_BUS, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); hose->region_count = 2; pci_register_hose(hose); #if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS) /* * This is a SW workaround for an apparent HW problem * in the PCI controller on the MPC85555/41 CDS boards. * The first config cycle must be to a valid, known * device on the PCI bus in order to trick the PCI * controller state machine into a known valid state. * Without this, the first config cycle has the chance * of hanging the controller permanently, just leaving * it in a semi-working state, or leaving it working. * * Pick on the Tundra, Device 17, to get it right. */ { u8 header_type; pci_hose_read_config_byte(hose, PCI_BDF(0,BRIDGE_ID,0), PCI_HEADER_TYPE, &header_type); } #endif hose->last_busno = pci_hose_scan(hose); #ifdef CONFIG_MPC85XX_PCI2 hose = &pci_hose[1]; hose->first_busno = pci_hose[0].last_busno + 1; hose->last_busno = 0xff; pci_setup_indirect(hose, (CONFIG_SYS_IMMR+0x9000), (CONFIG_SYS_IMMR+0x9004)); dev = PCI_BDF(hose->first_busno, 0, 0); pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); pcix2->potar1 = (CONFIG_SYS_PCI2_MEM_BUS >> 12) & 0x000fffff; pcix2->potear1 = 0x00000000; pcix2->powbar1 = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff; pcix2->powbear1 = 0x00000000; pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1)); pcix2->potar2 = (CONFIG_SYS_PCI2_IO_BUS >> 12) & 0x000fffff; pcix2->potear2 = 0x00000000; pcix2->powbar2 = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff; pcix2->powbear2 = 0x00000000; pcix2->powar2 = (POWAR_EN | POWAR_IO_READ | POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI2_IO_SIZE) - 1)); pcix2->pitar1 = 0x00000000; pcix2->piwbar1 = 0x00000000; pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G); pcix2->powar3 = 0; pcix2->powar4 = 0; pcix2->piwar2 = 0; pcix2->piwar3 = 0; pci_set_region(hose->regions + 0, CONFIG_SYS_PCI2_MEM_BUS, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM); pci_set_region(hose->regions + 1, CONFIG_SYS_PCI2_IO_BUS, CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); hose->region_count = 2; /* * Hose scan. */ pci_register_hose(hose); hose->last_busno = pci_hose_scan(hose); #endif } #endif /* !CONFIG_FSL_PCI_INIT */