From 5079d8bbad77bf21ecc5f17e05141f04cfaaabb3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 23 Jul 2010 11:34:49 -0400 Subject: Blackfin: jtag-console: robustify against missing peer If the other side isn't listening, we should reset the state to ignore the whole message and not just the part we missed. This makes it easier to connect at any time to the jtag console without worrying about the two sides getting out of sync and thus sending garbage back and forth. Signed-off-by: Mike Frysinger --- arch/blackfin/cpu/jtag-console.c | 40 ++++++++++++++++++++++++++++++++-------- 1 file changed, 32 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/cpu/jtag-console.c b/arch/blackfin/cpu/jtag-console.c index 1cd619f10..46b30a0f8 100644 --- a/arch/blackfin/cpu/jtag-console.c +++ b/arch/blackfin/cpu/jtag-console.c @@ -1,7 +1,7 @@ /* * jtag-console.c - console driver over Blackfin JTAG * - * Copyright (c) 2008 Analog Devices Inc. + * Copyright (c) 2008-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -10,23 +10,37 @@ #include #include +static inline uint32_t bfin_write_emudat(uint32_t emudat) +{ + __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_read_emudat(void) +{ + uint32_t emudat; + __asm__ __volatile__("%0 = emudat;" : "=d"(emudat)); + return emudat; +} + #ifndef CONFIG_JTAG_CONSOLE_TIMEOUT # define CONFIG_JTAG_CONSOLE_TIMEOUT 500 #endif /* The Blackfin tends to be much much faster than the JTAG hardware. */ -static void jtag_write_emudat(uint32_t emudat) +static bool jtag_write_emudat(uint32_t emudat) { static bool overflowed = false; ulong timeout = get_timer(0) + CONFIG_JTAG_CONSOLE_TIMEOUT; while (bfin_read_DBGSTAT() & 0x1) { if (overflowed) - return; + return overflowed; if (timeout < get_timer(0)) overflowed = true; } overflowed = false; - __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); + bfin_write_emudat(emudat); + return overflowed; } /* Transmit a buffer. The format is: * [32bit length][actual data] @@ -39,11 +53,21 @@ static void jtag_send(const char *c, uint32_t len) return; /* First send the length */ - jtag_write_emudat(len); + if (jtag_write_emudat(len)) + return; /* Then send the data */ - for (i = 0; i < len; i += 4) - jtag_write_emudat((c[i] << 0) | (c[i+1] << 8) | (c[i+2] << 16) | (c[i+3] << 24)); + for (i = 0; i < len; i += 4) { + uint32_t emudat = + (c[i + 0] << 0) | + (c[i + 1] << 8) | + (c[i + 2] << 16) | + (c[i + 3] << 24); + if (jtag_write_emudat(emudat)) { + bfin_write_emudat(0); + return; + } + } } static void jtag_putc(const char c) { @@ -88,7 +112,7 @@ static int jtag_getc(void) /* wait for new data ! */ while (!jtag_tstc_dbg()) continue; - __asm__("%0 = emudat;" : "=d"(emudat)); + emudat = bfin_read_emudat(); if (inbound_len == 0) { /* grab the length */ -- cgit v1.2.3 From 4fff5ac2f89140361e373818aa3c8c6c7dbd20e9 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 23 Jul 2010 11:34:49 -0400 Subject: Blackfin: jtag-console: add debug markers While we're in here, add some useful debug points. We need custom debug statements because we need the output to only go to the serial port. If we used the standard debug helpers, the output would also go to the stdout (which would be the jtag console) and make it hard to figure out what is going where exactly. Signed-off-by: Mike Frysinger --- arch/blackfin/cpu/jtag-console.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/cpu/jtag-console.c b/arch/blackfin/cpu/jtag-console.c index 46b30a0f8..bde8beeca 100644 --- a/arch/blackfin/cpu/jtag-console.c +++ b/arch/blackfin/cpu/jtag-console.c @@ -10,6 +10,22 @@ #include #include +#ifdef DEBUG +# define dprintf(...) serial_printf(__VA_ARGS__) +#else +# define dprintf(...) do { if (0) printf(__VA_ARGS__); } while (0) +#endif + +static inline void dprintf_decode(const char *s, uint32_t len) +{ + uint32_t i; + for (i = 0; i < len; ++i) + if (s[i] < 0x20 || s[i] >= 0x7f) + dprintf("\\%o", s[i]); + else + dprintf("%c", s[i]); +} + static inline uint32_t bfin_write_emudat(uint32_t emudat) { __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); @@ -52,6 +68,10 @@ static void jtag_send(const char *c, uint32_t len) if (len == 0) return; + dprintf("%s(\"", __func__); + dprintf_decode(c, len); + dprintf("\", %i)\n", len); + /* First send the length */ if (jtag_write_emudat(len)) return; @@ -83,7 +103,10 @@ static size_t inbound_len, leftovers_len; /* Lower layers want to know when jtag has data */ static int jtag_tstc_dbg(void) { - return (bfin_read_DBGSTAT() & 0x2); + int ret = (bfin_read_DBGSTAT() & 0x2); + if (ret) + dprintf("%s: ret:%i\n", __func__, ret); + return ret; } /* Higher layers want to know when any data is available */ @@ -101,6 +124,9 @@ static int jtag_getc(void) int ret; uint32_t emudat; + dprintf("%s: inlen:%zu leftlen:%zu left:%x\n", __func__, + inbound_len, leftovers_len, leftovers); + /* see if any data is left over */ if (leftovers_len) { --leftovers_len; -- cgit v1.2.3 From b990c7bda4d8f4501b3383be9ed44327de24f36f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 23 Jul 2010 16:51:49 -0400 Subject: Blackfin: jtag-console: handle newline stuffing Serial devices currently have to manually stuff \r after every \n found, but this is a bit more difficult with the jtag console since we process everything in chunks of 4 bit. So we have to scan & stuff the whole string rather than what most serial drivers do which is output on a byte per byte basis. Signed-off-by: Mike Frysinger --- arch/blackfin/cpu/jtag-console.c | 41 +++++++++++++++++++++++++++++++--------- 1 file changed, 32 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/cpu/jtag-console.c b/arch/blackfin/cpu/jtag-console.c index bde8beeca..e0f297560 100644 --- a/arch/blackfin/cpu/jtag-console.c +++ b/arch/blackfin/cpu/jtag-console.c @@ -7,6 +7,7 @@ */ #include +#include #include #include @@ -61,33 +62,55 @@ static bool jtag_write_emudat(uint32_t emudat) /* Transmit a buffer. The format is: * [32bit length][actual data] */ -static void jtag_send(const char *c, uint32_t len) +static void jtag_send(const char *raw_str, uint32_t len) { - uint32_t i; + const char *cooked_str; + uint32_t i, ex; if (len == 0) return; + /* Ugh, need to output \r after \n */ + ex = 0; + for (i = 0; i < len; ++i) + if (raw_str[i] == '\n') + ++ex; + if (ex) { + char *c = malloc(len + ex); + cooked_str = c; + for (i = 0; i < len; ++i) { + *c++ = raw_str[i]; + if (raw_str[i] == '\n') + *c++ = '\r'; + } + len += ex; + } else + cooked_str = raw_str; + dprintf("%s(\"", __func__); - dprintf_decode(c, len); + dprintf_decode(cooked_str, len); dprintf("\", %i)\n", len); /* First send the length */ if (jtag_write_emudat(len)) - return; + goto done; /* Then send the data */ for (i = 0; i < len; i += 4) { uint32_t emudat = - (c[i + 0] << 0) | - (c[i + 1] << 8) | - (c[i + 2] << 16) | - (c[i + 3] << 24); + (cooked_str[i + 0] << 0) | + (cooked_str[i + 1] << 8) | + (cooked_str[i + 2] << 16) | + (cooked_str[i + 3] << 24); if (jtag_write_emudat(emudat)) { bfin_write_emudat(0); - return; + goto done; } } + + done: + if (cooked_str != raw_str) + free((char *)cooked_str); } static void jtag_putc(const char c) { -- cgit v1.2.3 From 9ab87d04a8bc762182b31e53100d83be01e5ca9d Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 28 Apr 2010 04:02:21 -0500 Subject: powerpc/85xx: Add additional p4080 platform related defines/structs * Added PCIE4 address, offset, DEVDISR & LAW target ID * Added new p4080 DDR registers and defines to immap * Add missing corenet platform DEVDISR related defines * Updated ccsr_gur to include LIODN registers * Add RCWSR defines * Added Basic qman, pme, bman immap structs * Added SATA related offsets & addresses * Added Frame Manager 1/2 offsets & addresses * Renamed CONFIG_SYS_TSEC1_OFFSET to CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET * Added various offsets and addresses that where missing Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/fsl_law.h | 3 +- arch/powerpc/include/asm/immap_85xx.h | 216 ++++++++++++++++++++++++++++++---- 2 files changed, 197 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index 12ba1a6a0..0e255ffce 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -54,6 +54,7 @@ enum law_trgt_if { LAW_TRGT_IF_PCIE_1 = 0x00, LAW_TRGT_IF_PCIE_2 = 0x01, LAW_TRGT_IF_PCIE_3 = 0x02, + LAW_TRGT_IF_PCIE_4 = 0x03, LAW_TRGT_IF_RIO_1 = 0x08, LAW_TRGT_IF_RIO_2 = 0x09, diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index b1d219b7a..a5e56d807 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -172,7 +172,17 @@ typedef struct ccsr_ddr { u32 ddr_sr_cntr; /* self refresh counter */ u32 ddr_sdram_rcw_1; /* Control Words 1 */ u32 ddr_sdram_rcw_2; /* Control Words 2 */ - u8 res8_1b[2456]; + u8 reg_1ab[8]; + u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */ + u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */ + u8 res8_1b[104]; + u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */ + u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */ + u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */ + u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */ + u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */ + u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */ + u8 res8_1ba[0x908]; u32 ddr_dsr1; /* Debug Status 1 */ u32 ddr_dsr2; /* Debug Status 2 */ u32 ddr_cdr1; /* Control Driver 1 */ @@ -180,7 +190,21 @@ typedef struct ccsr_ddr { u8 res8_1c[200]; u32 ip_rev1; /* IP Block Revision 1 */ u32 ip_rev2; /* IP Block Revision 2 */ - u8 res8_2[512]; + u32 eor; /* Enhanced Optimization Register */ + u8 res8_2[252]; + u32 mtcr; /* Memory Test Control Register */ + u8 res8_3[28]; + u32 mtp1; /* Memory Test Pattern 1 */ + u32 mtp2; /* Memory Test Pattern 2 */ + u32 mtp3; /* Memory Test Pattern 3 */ + u32 mtp4; /* Memory Test Pattern 4 */ + u32 mtp5; /* Memory Test Pattern 5 */ + u32 mtp6; /* Memory Test Pattern 6 */ + u32 mtp7; /* Memory Test Pattern 7 */ + u32 mtp8; /* Memory Test Pattern 8 */ + u32 mtp9; /* Memory Test Pattern 9 */ + u32 mtp10; /* Memory Test Pattern 10 */ + u8 res8_4[184]; u32 data_err_inject_hi; /* Data Path Err Injection Mask High */ u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */ u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */ @@ -218,6 +242,9 @@ typedef struct ccsr_ddr { u8 res12[184]; } ccsr_ddr_t; +#define DDR_EOR_RD_BDW_OPT_DIS 0x80000000 /* Read BDW Opt. disable */ +#define DDR_EOR_ADDR_HASH_EN 0x40000000 /* Address hash enabled */ + /* I2C Registers */ typedef struct ccsr_i2c { struct fsl_i2c i2c[1]; @@ -1609,6 +1636,7 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR_PCIE1 0x80000000 #define FSL_CORENET_DEVDISR_PCIE2 0x40000000 #define FSL_CORENET_DEVDISR_PCIE3 0x20000000 +#define FSL_CORENET_DEVDISR_PCIE4 0x10000000 #define FSL_CORENET_DEVDISR_RMU 0x08000000 #define FSL_CORENET_DEVDISR_SRIO1 0x04000000 #define FSL_CORENET_DEVDISR_SRIO2 0x02000000 @@ -1618,6 +1646,8 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR_DDR2 0x00080000 #define FSL_CORENET_DEVDISR_DBG 0x00010000 #define FSL_CORENET_DEVDISR_NAL 0x00008000 +#define FSL_CORENET_DEVDISR_SATA1 0x00004000 +#define FSL_CORENET_DEVDISR_SATA2 0x00002000 #define FSL_CORENET_DEVDISR_ELBC 0x00001000 #define FSL_CORENET_DEVDISR_USB1 0x00000800 #define FSL_CORENET_DEVDISR_USB2 0x00000400 @@ -1638,12 +1668,14 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR2_DTSEC1_2 0x00400000 #define FSL_CORENET_DEVDISR2_DTSEC1_3 0x00200000 #define FSL_CORENET_DEVDISR2_DTSEC1_4 0x00100000 +#define FSL_CORENET_DEVDISR2_DTSEC1_5 0x00080000 #define FSL_CORENET_DEVDISR2_FM2 0x00020000 #define FSL_CORENET_DEVDISR2_10GEC2 0x00010000 #define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00008000 #define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00004000 #define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00002000 #define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00001000 +#define FSL_CORENET_NUM_DEVDISR 2 u8 res7[8]; u32 powmgtcsr; /* Power management status & control */ u8 res8[12]; @@ -1672,9 +1704,18 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR5_DDR_SYNC 0x00000080 #define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 7 #define FSL_CORENET_RCWSR5_SRDS_EN 0x00002000 +#define FSL_CORENET_RCWSRn_SRDS_LPD_B2 0x3c000000 /* bits 162..165 */ +#define FSL_CORENET_RCWSRn_SRDS_LPD_B3 0x003c0000 /* bits 170..173 */ #define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000 #define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000 #define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000 +#define FSL_CORENET_RCWSR11_EC1 0x00c00000 /* bits 360..361 */ +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1 0x00000000 +#define FSL_CORENET_RCWSR11_EC1_FM1_USB1 0x00800000 +#define FSL_CORENET_RCWSR11_EC2 0x001c0000 /* bits 363..365 */ +#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1 0x00000000 +#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2 0x00080000 +#define FSL_CORENET_RCWSR11_EC2_USB2 0x00100000 u8 res18[192]; u32 scratchrw[4]; /* Scratch Read/Write */ u8 res19[240]; @@ -1698,10 +1739,15 @@ typedef struct ccsr_gur { u32 sdmmc2liodnr; /* SD/MMC 2 LIODN */ u32 sdmmc3liodnr; /* SD/MMC 3 LIODN */ u32 sdmmc4liodnr; /* SD/MMC 4 LIODN */ - u32 rmuliodnr; /* RIO Message Unit LIODN */ - u32 rduliodnr; /* RIO Doorbell Unit LIODN */ - u32 rpwuliodnr; /* RIO Port Write Unit LIODN */ - u8 res22[52]; + u32 rio1maintliodnr;/* RIO 1 Maintenance LIODN */ + u32 rio2maintliodnr;/* RIO 2 Maintenance LIODN */ + u32 rio3maintliodnr;/* RIO 3 Maintenance LIODN */ + u32 rio4maintliodnr;/* RIO 4 Maintenance LIODN */ + u32 sata1liodnr; /* SATA 1 LIODN */ + u32 sata2liodnr; /* SATA 2 LIODN */ + u32 sata3liodnr; /* SATA 3 LIODN */ + u32 sata4liodnr; /* SATA 4 LIODN */ + u8 res22[32]; u32 dma1liodnr; /* DMA 1 LIODN */ u32 dma2liodnr; /* DMA 2 LIODN */ u32 dma3liodnr; /* DMA 3 LIODN */ @@ -1736,6 +1782,12 @@ typedef struct ccsr_gur { u8 res37[380]; } ccsr_gur_t; +/* + * On p4080 we have an LIODN for msg unit (rmu) but not maintenance + * everything after has RMan thus msg unit LIODN is used for maintenance + */ +#define rmuliodnr rio1maintliodnr + typedef struct ccsr_clk { u32 clkc0csr; /* Core 0 Clock control/status */ u8 res1[0x1c]; @@ -2004,38 +2056,125 @@ enum { /* Security Engine Block (MS = Most Sig., LS = Least Sig.) */ #if CONFIG_SYS_FSL_SEC_COMPAT >= 4 typedef struct ccsr_sec { - u8 res1[0xfa0]; + u32 res0; + u32 mcfgr; /* Master CFG Register */ + u8 res1[0x8]; + struct { + u32 ms; /* Job Ring LIODN Register, MS */ + u32 ls; /* Job Ring LIODN Register, LS */ + } jqliodnr[4]; + u8 res2[0x30]; + struct { + u32 ms; /* RTIC LIODN Register, MS */ + u32 ls; /* RTIC LIODN Register, LS */ + } rticliodnr[4]; + u8 res3[0x1c]; + u32 decorr; /* DECO Request Register */ + struct { + u32 ms; /* DECO LIODN Register, MS */ + u32 ls; /* DECO LIODN Register, LS */ + } decoliodnr[5]; + u8 res4[0x58]; + u32 dar; /* DECO Avail Register */ + u32 drr; /* DECO Reset Register */ + u8 res5[0xe78]; u32 crnr_ms; /* CHA Revision Number Register, MS */ u32 crnr_ls; /* CHA Revision Number Register, LS */ u32 ctpr_ms; /* Compile Time Parameters Register, MS */ -#define SEC_CTPR_MS_AXI_LIODN 0x08000000 -#define SEC_CTPR_MS_QI 0x02000000 u32 ctpr_ls; /* Compile Time Parameters Register, LS */ - u8 res2[0x10]; + u8 res6[0x10]; u32 far_ms; /* Fault Address Register, MS */ u32 far_ls; /* Fault Address Register, LS */ u32 falr; /* Fault Address LIODN Register */ u32 fadr; /* Fault Address Detail Register */ - u8 res3[0x4]; + u8 res7[0x4]; u32 csta; /* CAAM Status Register */ - u8 res4[0x8]; + u8 res8[0x8]; u32 rvid; /* Run Time Integrity Checking Version ID Reg.*/ -#define SEC_RVID_MA 0x0f000000 u32 ccbvid; /* CHA Cluster Block Version ID Register */ u32 chavid_ms; /* CHA Version ID Register, MS */ u32 chavid_ls; /* CHA Version ID Register, LS */ u32 chanum_ms; /* CHA Number Register, MS */ + u32 chanum_ls; /* CHA Number Register, LS */ + u32 secvid_ms; /* SEC Version ID Register, MS */ + u32 secvid_ls; /* SEC Version ID Register, LS */ + u8 res9[0x6020]; + u32 qilcr_ms; /* Queue Interface LIODN CFG Register, MS */ + u32 qilcr_ls; /* Queue Interface LIODN CFG Register, LS */ + u8 res10[0x8fd8]; +} ccsr_sec_t; + +#define SEC_CTPR_MS_AXI_LIODN 0x08000000 +#define SEC_CTPR_MS_QI 0x02000000 +#define SEC_RVID_MA 0x0f000000 #define SEC_CHANUM_MS_JQNUM_MASK 0xf0000000 #define SEC_CHANUM_MS_JQNUM_SHIFT 28 #define SEC_CHANUM_MS_DECONUM_MASK 0x0f000000 #define SEC_CHANUM_MS_DECONUM_SHIFT 24 - u32 chanum_ls; /* CHA Number Register, LS */ - u32 caamvid_ms; /* CAAM Version ID Register, MS */ - u32 caamvid_ls; /* CAAM Version ID Register, LS */ - u8 res5[0xf000]; -} ccsr_sec_t; #endif +typedef struct ccsr_qman { + struct { + u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */ + u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */ + u32 res; + u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg */ + } qcsp[32]; + + /* Not actually reserved, but irrelevant to u-boot */ + u8 res[0xbf8 - 0x200]; + u32 ip_rev_1; + u32 ip_rev_2; + u32 fqd_bare; /* FQD Extended Base Addr Register */ + u32 fqd_bar; /* FQD Base Addr Register */ + u8 res1[0x8]; + u32 fqd_ar; /* FQD Attributes Register */ + u8 res2[0xc]; + u32 pfdr_bare; /* PFDR Extended Base Addr Register */ + u32 pfdr_bar; /* PFDR Base Addr Register */ + u8 res3[0x8]; + u32 pfdr_ar; /* PFDR Attributes Register */ + u8 res4[0x4c]; + u32 qcsp_bare; /* QCSP Extended Base Addr Register */ + u32 qcsp_bar; /* QCSP Base Addr Register */ + u8 res5[0x78]; + u32 ci_sched_cfg; /* Initiator Scheduling Configuration */ + u32 srcidr; /* Source ID Register */ + u32 liodnr; /* LIODN Register */ + u8 res6[4]; + u32 ci_rlm_cfg; /* Initiator Read Latency Monitor Cfg */ + u32 ci_rlm_avg; /* Initiator Read Latency Monitor Avg */ + u8 res7[0x2e8]; +} ccsr_qman_t; + +typedef struct ccsr_bman { + /* Not actually reserved, but irrelevant to u-boot */ + u8 res[0xbf8]; + u32 ip_rev_1; + u32 ip_rev_2; + u32 fbpr_bare; /* FBPR Extended Base Addr Register */ + u32 fbpr_bar; /* FBPR Base Addr Register */ + u8 res1[0x8]; + u32 fbpr_ar; /* FBPR Attributes Register */ + u8 res2[0xf0]; + u32 srcidr; /* Source ID Register */ + u32 liodnr; /* LIODN Register */ + u8 res7[0x2f4]; +} ccsr_bman_t; + +typedef struct ccsr_pme { + u8 res0[0x804]; + u32 liodnbr; /* LIODN Base Register */ + u8 res1[0x1f8]; + u32 srcidr; /* Source ID Register */ + u8 res2[8]; + u32 liodnr; /* LIODN Register */ + u8 res3[0x1e8]; + u32 pm_ip_rev_1; /* PME IP Block Revision Reg 1*/ + u32 pm_ip_rev_2; /* PME IP Block Revision Reg 1*/ + u8 res4[0x400]; +} ccsr_pme_t; + #ifdef CONFIG_FSL_CORENET #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000 @@ -2044,16 +2183,41 @@ typedef struct ccsr_sec { #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000 #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000 #define CONFIG_SYS_FSL_CPC_OFFSET 0x10000 -#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x100000 +#define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000 +#define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000 +#define CONFIG_SYS_MPC85xx_DMA_OFFSET CONFIG_SYS_MPC85xx_DMA1_OFFSET #define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x110000 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x114000 #define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x124000 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000 -#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x210000 +#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x200000 +#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x201000 +#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x202000 +#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x203000 +#define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000 +#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000 +#define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET +#define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x220000 +#define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x221000 #define CONFIG_SYS_FSL_SEC_OFFSET 0x300000 +#define CONFIG_SYS_FSL_CORENET_PME_OFFSET 0x316000 #define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET 0x318000 #define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET 0x31a000 -#define CONFIG_SYS_TSEC1_OFFSET 0x4e0000 /* FM1@DTSEC0 */ +#define CONFIG_SYS_FSL_FM1_OFFSET 0x400000 +#define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET 0x488000 +#define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET 0x489000 +#define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET 0x48a000 +#define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET 0x48b000 +#define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET 0x48c000 +#define CONFIG_SYS_FSL_FM1_RX0_10G_OFFSET 0x490000 +#define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0x4e0000 +#define CONFIG_SYS_FSL_FM2_OFFSET 0x500000 +#define CONFIG_SYS_FSL_FM2_RX0_1G_OFFSET 0x588000 +#define CONFIG_SYS_FSL_FM2_RX1_1G_OFFSET 0x589000 +#define CONFIG_SYS_FSL_FM2_RX2_1G_OFFSET 0x58a000 +#define CONFIG_SYS_FSL_FM2_RX3_1G_OFFSET 0x58b000 +#define CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET 0x58c000 +#define CONFIG_SYS_FSL_FM2_RX0_10G_OFFSET 0x590000 #else #define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000 #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000 @@ -2098,6 +2262,8 @@ typedef struct ccsr_sec { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_QMAN_OFFSET) #define CONFIG_SYS_FSL_CORENET_BMAN_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_BMAN_OFFSET) +#define CONFIG_SYS_FSL_CORENET_PME_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_PME_OFFSET) #define CONFIG_SYS_MPC85xx_GUTS_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET) #define CONFIG_SYS_FSL_CORENET_CCM_ADDR \ @@ -2146,6 +2312,12 @@ typedef struct ccsr_sec { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) #define CONFIG_SYS_FSL_SEC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET) +#define CONFIG_SYS_FSL_FM1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_OFFSET) +#define CONFIG_SYS_FSL_FM1_DTSEC1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET) +#define CONFIG_SYS_FSL_FM2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM2_OFFSET) #define CONFIG_SYS_PCI1_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI1_OFFSET) @@ -2157,6 +2329,8 @@ typedef struct ccsr_sec { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE2_OFFSET) #define CONFIG_SYS_PCIE3_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE3_OFFSET) +#define CONFIG_SYS_PCIE4_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE4_OFFSET) #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) -- cgit v1.2.3 From ebd7cb0ba98b8d1094152ef1ba2cf9ad906a16b8 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 3 Jul 2010 12:56:51 -0500 Subject: powerpc/fsl_fman: Add initial fman immap structures Add basic structures for Frame Manager on P4080/P3041/P5020 devices Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/fsl_fman.h | 212 ++++++++++++++++++++++++++++++++++ arch/powerpc/include/asm/immap_85xx.h | 1 + 2 files changed, 213 insertions(+) create mode 100644 arch/powerpc/include/asm/fsl_fman.h (limited to 'arch') diff --git a/arch/powerpc/include/asm/fsl_fman.h b/arch/powerpc/include/asm/fsl_fman.h new file mode 100644 index 000000000..6c01ffc41 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_fman.h @@ -0,0 +1,212 @@ +/* + * MPC85xx Internal Memory Map + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FSL_FMAN_H__ +#define __FSL_FMAN_H__ + +#include + +typedef struct fm_bmi_common { + u32 fmbm_init; /* BMI initialization */ + u32 fmbm_cfg1; /* BMI configuration1 */ + u32 fmbm_cfg2; /* BMI configuration2 */ + u32 res0[0x5]; + u32 fmbm_ievr; /* interrupt event register */ + u32 fmbm_ier; /* interrupt enable register */ + u32 fmbm_ifr; /* interrupt force register */ + u32 res1[0x5]; + u32 fmbm_arb[0x8]; /* BMI arbitration */ + u32 res2[0x28]; + u32 fmbm_gde; /* global debug enable */ + u32 fmbm_pp[0x3f]; /* BMI port parameters */ + u32 res3; + u32 fmbm_pfs[0x3f]; /* BMI port FIFO size */ + u32 res4; + u32 fmbm_ppid[0x3f];/* port partition ID */ +} fm_bmi_common_t; + +typedef struct fm_qmi_common { + u32 fmqm_gc; /* general configuration register */ + u32 res0; + u32 fmqm_eie; /* error interrupt event register */ + u32 fmqm_eien; /* error interrupt enable register */ + u32 fmqm_eif; /* error interrupt force register */ + u32 fmqm_ie; /* interrupt event register */ + u32 fmqm_ien; /* interrupt enable register */ + u32 fmqm_if; /* interrupt force register */ + u32 fmqm_gs; /* global status register */ + u32 fmqm_ts; /* task status register */ + u32 fmqm_etfc; /* enqueue total frame counter */ + u32 fmqm_dtfc; /* dequeue total frame counter */ + u32 fmqm_dc0; /* dequeue counter 0 */ + u32 fmqm_dc1; /* dequeue counter 1 */ + u32 fmqm_dc2; /* dequeue counter 2 */ + u32 fmqm_dc3; /* dequeue counter 3 */ + u32 fmqm_dfnoc; /* dequeue FQID not override counter */ + u32 fmqm_dfcc; /* dequeue FQID from context counter */ + u32 fmqm_dffc; /* dequeue FQID from FD counter */ + u32 fmqm_dcc; /* dequeue confirm counter */ + u32 res1[0xc]; + u32 fmqm_dtrc; /* debug trap configuration register */ + u32 fmqm_efddd; /* enqueue frame descriptor dynamic debug */ + u32 res3[0x2]; + u32 res4[0xdc]; /* missing debug regs */ +} fm_qmi_common_t; + +typedef struct fm_bmi { + u8 res[1024]; +} fm_bmi_t; + +typedef struct fm_qmi { + u8 res[1024]; +} fm_qmi_t; + +typedef struct fm_parser { + u8 res[1024]; +} fm_parser_t; + +typedef struct fm_policer { + u8 res[4*1024]; +} fm_policer_t; + +typedef struct fm_keygen { + u8 res[4*1024]; +} fm_keygen_t; + +typedef struct fm_dma { + u32 fmdmsr; /* status register */ + u32 fmdmmr; /* mode register */ + u32 fmdmtr; /* bus threshold register */ + u32 fmdmhy; /* bus hysteresis register */ + u32 fmdmsetr; /* SOS emergency threshold register */ + u32 fmdmtah; /* transfer bus address high register */ + u32 fmdmtal; /* transfer bus address low register */ + u32 fmdmtcid; /* transfer bus communication ID register */ + u32 fmdmra; /* DMA bus internal ram address register */ + u32 fmdmrd; /* DMA bus internal ram data register */ + u32 res0[0xb]; + u32 fmdmdcr; /* debug counter */ + u32 fmdmemsr; /* emrgency smoother register */ + u32 res1; + u32 fmdmplr[32]; /* FM DMA PID-LIODN # register */ + u32 res[0x3c8]; +} fm_dma_t; + +typedef struct fm_fpm { + u32 fpmtnc; /* TNUM control */ + u32 fpmprc; /* Port_ID control */ + u32 res0; + u32 fpmflc; /* flush control */ + u32 fpmdis1; /* dispatch thresholds1 */ + u32 fpmdis2; /* dispatch thresholds2 */ + u32 fmepi; /* error pending interrupts */ + u32 fmrie; /* rams interrupt enable */ + u32 fpmfcevent[0x4];/* FMan controller event 0-3 */ + u32 res1[0x4]; + u32 fpmfcmask[0x4]; /* FMan controller mask 0-3 */ + u32 res2[0x4]; + u32 fpmtsc1; /* timestamp control1 */ + u32 fpmtsc2; /* timestamp control2 */ + u32 fpmtsp; /* time stamp */ + u32 fpmtsf; /* time stamp fraction */ + u32 fpmrcr; /* rams control and event */ + u32 res3[0x3]; + u32 fpmdrd[0x4]; /* data_ram data 0-3 */ + u32 res4[0xc]; + u32 fpmdra; /* data ram access */ + u32 fm_ip_rev_1; /* IP block revision 1 */ + u32 fm_ip_rev_2; /* IP block revision 2 */ + u32 fmrstc; /* reset command */ + u32 fmcld; /* classifier debug control */ + u32 fmnpi; /* normal pending interrupts */ + u32 res5; + u32 fmnee; /* event and enable */ + u32 fpmcev[0x4]; /* CPU event 0-3 */ + u32 res6[0x4]; + u32 fmfp_ps[0x40]; /* port status */ + u32 res7[0x260]; + u32 fpmts[0x80]; /* task status */ + u32 res8[0xa0]; +} fm_fpm_t; + +typedef struct fm_imem { + u8 res[4*1024]; +} fm_imem_t; + +typedef struct fm_soft_parser { + u8 res[4*1024]; +} fm_soft_parser_t; + +typedef struct fm_dtesc { + u8 res[4*1024]; +} fm_dtsec_t; + +typedef struct fm_mdio { + u8 res[4*1024]; +} fm_mdio_t; + +typedef struct fm_10gec { + u8 res[4*1024]; +} fm_10gec_t; + +typedef struct fm_10gec_mdio { + u8 res[4*1024]; +} fm_10gec_mdio_t; + +typedef struct fm_1588 { + u8 res[4*1024]; +} fm_1588_t; + +typedef struct ccsr_fman { + u8 muram[0x80000]; + fm_bmi_common_t fm_bmi_common; + fm_qmi_common_t fm_qmi_common; + u8 res0[2048]; + struct { + fm_bmi_t fm_bmi; + fm_qmi_t fm_qmi; + fm_parser_t fm_parser; + u8 res[1024]; + } port[63]; + fm_policer_t fm_policer; + fm_keygen_t fm_keygen; + fm_dma_t fm_dma; + fm_fpm_t fm_fpm; + fm_imem_t fm_imem; + u8 res1[8*1024]; + fm_soft_parser_t fm_soft_parser; + u8 res2[96*1024]; + struct { + fm_dtsec_t fm_dtesc; + fm_mdio_t fm_mdio; + } mac[4]; + u8 res3[32*1024]; + fm_10gec_t fm_10gec; + fm_10gec_mdio_t fm_10gec_mdio; + u8 res4[48*1024]; + fm_1588_t fm_1588; + u8 res5[4*1024]; +} ccsr_fman_t; + +#endif /*__FSL_FMAN_H__*/ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index a5e56d807..f109e8c5c 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -32,6 +32,7 @@ #include #include #include +#include typedef struct ccsr_local { u32 ccsrbarh; /* CCSR Base Addr High */ -- cgit v1.2.3 From a3f18529ec9cd291f040f6a9c6e9ecf0f7cb721f Mon Sep 17 00:00:00 2001 From: york Date: Fri, 2 Jul 2010 22:25:57 +0000 Subject: powerpc/85xx: Move INIT_RAM_ADDR physical address to 36-bit space If 36-bit physical address is used, move the INIT_RAM_ADDR to higher address. This frees the low 4GB address space for better use. Signed-off-by: York Sun --- arch/powerpc/cpu/mpc85xx/start.S | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index b3cb56a5b..3278b109f 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -330,8 +330,18 @@ _start_e500: lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l +#if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \ + defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH) + lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, + (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, + (MAS3_SX|MAS3_SW|MAS3_SR))@l + li r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH + mtspr MAS7,r10 +#else lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l +#endif mtspr MAS0,r6 mtspr MAS1,r7 -- cgit v1.2.3 From 6aba33e939c41358cf731cbbdd9d5ca59c9266e8 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 19 Mar 2009 03:40:08 -0500 Subject: powerpc/p4080: Add support for CPC(Corenet platform cache) on CoreNet platforms The CoreNet style platforms can have a L3 cache that fronts the memory controllers. Enable that cache as well as add information into the device tree about it. Signed-off-by: Kumar Gala Signed-off-by: Dave Liu Signed-off-by: Becky Bruce Signed-off-by: Roy Zang Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc85xx/cpu_init.c | 45 ++++++++++++++++++++++++++++++++++++- arch/powerpc/cpu/mpc85xx/fdt.c | 24 ++++++++++++++++++++ 2 files changed, 68 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 5d5b4c296..a90ebb105 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -127,6 +127,44 @@ void config_8560_ioports (volatile ccsr_cpm_t * cpm) } #endif +#ifdef CONFIG_SYS_FSL_CPC +static void enable_cpc(void) +{ + int i; + u32 size = 0; + + cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR; + + for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) { + u32 cpccfg0 = in_be32(&cpc->cpccfg0); + size += CPC_CFG0_SZ_K(cpccfg0); + + out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE); + /* Read back to sync write */ + in_be32(&cpc->cpccsr0); + + } + + printf("Corenet Platform Cache: %d KB enabled\n", size); +} + +void invalidate_cpc(void) +{ + int i; + cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR; + + for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) { + /* Flash invalidate the CPC and clear all the locks */ + out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC); + while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC)) + ; + } +} +#else +#define enable_cpc() +#define invalidate_cpc() +#endif /* CONFIG_SYS_FSL_CPC */ + /* * Breathe some life into the CPU... * @@ -188,6 +226,9 @@ void cpu_init_f (void) corenet_tb_init(); #endif init_used_tlb_cams(); + + /* Invalidate the CPC before DDR gets enabled */ + invalidate_cpc(); } @@ -198,7 +239,6 @@ void cpu_init_f (void) * use the same bit-encoding as the older 8555, etc, parts. * */ - int cpu_init_r(void) { #ifdef CONFIG_SYS_LBC_LCRR @@ -319,6 +359,9 @@ int cpu_init_r(void) #else puts("disabled\n"); #endif + + enable_cpc(); + #ifdef CONFIG_QE uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */ qe_init(qe_base); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 932466e88..6c5fb36a3 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -28,6 +28,7 @@ #include #include #include +#include #ifdef CONFIG_FSL_ESDHC #include #endif @@ -80,7 +81,30 @@ void ft_fixup_cpu(void *blob, u64 memory_limit) } #endif +#ifdef CONFIG_SYS_FSL_CPC +static inline void ft_fixup_l3cache(void *blob, int off) +{ + u32 line_size, num_ways, size, num_sets; + cpc_corenet_t *cpc = (void *)CONFIG_SYS_FSL_CPC_ADDR; + u32 cfg0 = in_be32(&cpc->cpccfg0); + + size = CPC_CFG0_SZ_K(cfg0) * 1024 * CONFIG_SYS_NUM_CPC; + num_ways = CPC_CFG0_NUM_WAYS(cfg0); + line_size = CPC_CFG0_LINE_SZ(cfg0); + num_sets = size / (line_size * num_ways); + + fdt_setprop(blob, off, "cache-unified", NULL, 0); + fdt_setprop_cell(blob, off, "cache-block-size", line_size); + fdt_setprop_cell(blob, off, "cache-size", size); + fdt_setprop_cell(blob, off, "cache-sets", num_sets); + fdt_setprop_cell(blob, off, "cache-level", 3); +#ifdef CONFIG_SYS_CACHE_STASHING + fdt_setprop_cell(blob, off, "cache-stash-id", 1); +#endif +} +#else #define ft_fixup_l3cache(x, y) +#endif #if defined(CONFIG_L2_CACHE) /* return size in kilobytes */ -- cgit v1.2.3 From db977abfc87eebf22dfed374528c89130949dce2 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 10 Sep 2009 03:02:13 -0500 Subject: powerpc/85xx: Add support to initialize LIODN registers and portals On the new QorIQ/CoreNet based platforms we need to initialize the "portals" as access into the Data Path subystem as well as Logical IO Device Numbers (LIODN) that are used for the IOMMU (PAMU). Signed-off-by: Kumar Gala Signed-off-by: Scott Wood Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc85xx/Makefile | 6 + arch/powerpc/cpu/mpc85xx/fdt.c | 15 +++ arch/powerpc/cpu/mpc85xx/liodn.c | 187 ++++++++++++++++++++++++++ arch/powerpc/cpu/mpc85xx/p4080_ids.c | 115 ++++++++++++++++ arch/powerpc/cpu/mpc85xx/portals.c | 238 +++++++++++++++++++++++++++++++++ arch/powerpc/include/asm/fsl_liodn.h | 142 ++++++++++++++++++++ arch/powerpc/include/asm/fsl_portals.h | 59 ++++++++ 7 files changed, 762 insertions(+) create mode 100644 arch/powerpc/cpu/mpc85xx/liodn.c create mode 100644 arch/powerpc/cpu/mpc85xx/p4080_ids.c create mode 100644 arch/powerpc/cpu/mpc85xx/portals.c create mode 100644 arch/powerpc/include/asm/fsl_liodn.h create mode 100644 arch/powerpc/include/asm/fsl_portals.h (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index fe851f15d..6ae113acf 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -64,10 +64,16 @@ COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o +COBJS-$(CONFIG_FSL_CORENET) += liodn.o COBJS-$(CONFIG_MP) += mp.o COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o COBJS-$(CONFIG_P1022) += p1022_serdes.o COBJS-$(CONFIG_PCI) += pci.o +COBJS-$(CONFIG_FSL_CORENET) += portals.o + +# various SoC specific assignments +COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o + COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_CPM2) += serial_scc.o diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 6c5fb36a3..8e7b827ff 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -29,6 +29,7 @@ #include #include #include +#include #ifdef CONFIG_FSL_ESDHC #include #endif @@ -446,4 +447,18 @@ void ft_cpu_setup(void *blob, bd_t *bd) #endif ft_fixup_dpaa_clks(blob); + +#if defined(CONFIG_SYS_BMAN_MEM_PHYS) + fdt_portal(blob, "fsl,bman-portal", "bman-portals", + (u64)CONFIG_SYS_BMAN_MEM_PHYS, + CONFIG_SYS_BMAN_MEM_SIZE); +#endif + +#if defined(CONFIG_SYS_QMAN_MEM_PHYS) + fdt_portal(blob, "fsl,qman-portal", "qman-portals", + (u64)CONFIG_SYS_QMAN_MEM_PHYS, + CONFIG_SYS_QMAN_MEM_SIZE); + + fdt_fixup_qportals(blob); +#endif } diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c new file mode 100644 index 000000000..bd1909471 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/liodn.c @@ -0,0 +1,187 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include +#include +#include +#include + +int get_dpaa_liodn(enum fsl_dpaa_dev dpaa_dev, u32 *liodns, int liodn_offset) +{ + liodns[0] = liodn_bases[dpaa_dev].id[0] + liodn_offset; + + if (liodn_bases[dpaa_dev].num_ids == 2) + liodns[1] = liodn_bases[dpaa_dev].id[1] + liodn_offset; + + return liodn_bases[dpaa_dev].num_ids; +} + +static void set_liodn(struct liodn_id_table *tbl, int size) +{ + int i; + + for (i = 0; i < size; i++) { + u32 liodn; + if (tbl[i].num_ids == 2) { + liodn = (tbl[i].id[0] << 16) | tbl[i].id[1]; + } else { + liodn = tbl[i].id[0]; + } + + out_be32((volatile u32 *)(tbl[i].reg_offset), liodn); + } +} + +static void setup_sec_liodn_base(void) +{ + ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR; + u32 base; + + if (!IS_E_PROCESSOR(get_svr())) + return; + + /* QILCR[QSLOM] */ + out_be32(&sec->qilcr_ms, 0x3ff<<16); + + base = (liodn_bases[FSL_HW_PORTAL_SEC].id[0] << 16) | + liodn_bases[FSL_HW_PORTAL_SEC].id[1]; + + out_be32(&sec->qilcr_ls, base); +} + +#ifdef CONFIG_SYS_DPAA_FMAN +static void setup_fman_liodn_base(enum fsl_dpaa_dev dev, + struct liodn_id_table *tbl, int size) +{ + int i; + ccsr_fman_t *fm; + u32 base; + + switch(dev) { + case FSL_HW_PORTAL_FMAN1: + fm = (void *)CONFIG_SYS_FSL_FM1_ADDR; + break; + +#if (CONFIG_SYS_NUM_FMAN == 2) + case FSL_HW_PORTAL_FMAN2: + fm = (void *)CONFIG_SYS_FSL_FM2_ADDR; + break; +#endif + default: + printf("Error: Invalid device type to %s\n", __FUNCTION__); + return ; + } + + base = (liodn_bases[dev].id[0] << 16) | liodn_bases[dev].id[0]; + + /* setup all bases the same */ + for (i = 0; i < 32; i++) { + out_be32(&fm->fm_dma.fmdmplr[i], base); + } + + /* update tbl to ... */ + for (i = 0; i < size; i++) + tbl[i].id[0] += liodn_bases[dev].id[0]; +} +#endif + +static void setup_pme_liodn_base(void) +{ +#ifdef CONFIG_SYS_DPAA_PME + ccsr_pme_t *pme = (void *)CONFIG_SYS_FSL_CORENET_PME_ADDR; + u32 base = (liodn_bases[FSL_HW_PORTAL_PME].id[0] << 16) | + liodn_bases[FSL_HW_PORTAL_PME].id[1]; + + out_be32(&pme->liodnbr, base); +#endif +} + +void set_liodns(void) +{ + /* setup general liodn offsets */ + set_liodn(liodn_tbl, liodn_tbl_sz); + + /* setup SEC block liodn bases & offsets if we have one */ + if (IS_E_PROCESSOR(get_svr())) { + set_liodn(sec_liodn_tbl, sec_liodn_tbl_sz); + setup_sec_liodn_base(); + } + + /* setup FMAN block(s) liodn bases & offsets if we have one */ +#ifdef CONFIG_SYS_DPAA_FMAN + set_liodn(fman1_liodn_tbl, fman1_liodn_tbl_sz); + setup_fman_liodn_base(FSL_HW_PORTAL_FMAN1, fman1_liodn_tbl, + fman1_liodn_tbl_sz); + +#if (CONFIG_SYS_NUM_FMAN == 2) + set_liodn(fman2_liodn_tbl, fman2_liodn_tbl_sz); + setup_fman_liodn_base(FSL_HW_PORTAL_FMAN2, fman2_liodn_tbl, + fman2_liodn_tbl_sz); +#endif +#endif + /* setup PME liodn base */ + setup_pme_liodn_base(); +} + +static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz) +{ + int i; + + for (i = 0; i < sz; i++) { + int off; + + if (tbl[i].compat == NULL) + continue; + + off = fdt_node_offset_by_compat_reg(blob, + tbl[i].compat, tbl[i].compat_offset); + if (off >= 0) { + off = fdt_setprop(blob, off, "fsl,liodn", + &tbl[i].id[0], + sizeof(u32) * tbl[i].num_ids); + if (off > 0) + printf("WARNING unable to set fsl,liodn for " + "%s: %s\n", + tbl[i].compat, fdt_strerror(off)); + } else { + debug("WARNING: could not set fsl,liodn for %s: %s.\n", + tbl[i].compat, fdt_strerror(off)); + } + } +} + +void fdt_fixup_liodn(void *blob) +{ + fdt_fixup_liodn_tbl(blob, liodn_tbl, liodn_tbl_sz); +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_liodn_tbl(blob, fman1_liodn_tbl, fman1_liodn_tbl_sz); +#if (CONFIG_SYS_NUM_FMAN == 2) + fdt_fixup_liodn_tbl(blob, fman2_liodn_tbl, fman2_liodn_tbl_sz); +#endif +#endif + fdt_fixup_liodn_tbl(blob, sec_liodn_tbl, sec_liodn_tbl_sz); +} diff --git a/arch/powerpc/cpu/mpc85xx/p4080_ids.c b/arch/powerpc/cpu/mpc85xx/p4080_ids.c new file mode 100644 index 000000000..3861146b8 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p4080_ids.c @@ -0,0 +1,115 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO( 1, 2, 1, 0), + SET_QP_INFO( 3, 4, 2, 1), + SET_QP_INFO( 5, 6, 3, 2), + SET_QP_INFO( 7, 8, 4, 3), + SET_QP_INFO( 9, 10, 5, 4), + SET_QP_INFO(11, 12, 6, 5), + SET_QP_INFO(13, 14, 7, 6), + SET_QP_INFO(15, 16, 8, 7), + SET_QP_INFO(17, 18, 9, 0), /* for now sdest to 0 */ + SET_QP_INFO(19, 20, 10, 0), /* for now sdest to 0 */ +}; + +struct liodn_id_table liodn_tbl[] = { + SET_USB_LIODN(1, "fsl-usb2-mph", 127), + SET_USB_LIODN(2, "fsl-usb2-dr", 157), + + SET_SDHC_LIODN(1, 156), + + SET_PCI_LIODN(1, 193), + SET_PCI_LIODN(2, 194), + SET_PCI_LIODN(3, 195), + + SET_DMA_LIODN(1, 196), + SET_DMA_LIODN(2, 197), + + SET_GUTS_LIODN("fsl,rapidio-delta", 198, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 199, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rmuliodnr, 0), + + SET_QMAN_LIODN(31), + SET_BMAN_LIODN(32), + SET_PME_LIODN(128), +}; + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 11), + SET_FMAN_RX_1G_LIODN(1, 1, 12), + SET_FMAN_RX_1G_LIODN(1, 2, 13), + SET_FMAN_RX_1G_LIODN(1, 3, 14), + SET_FMAN_RX_10G_LIODN(1, 0, 15), +}; + +#if (CONFIG_SYS_NUM_FMAN == 2) +struct liodn_id_table fman2_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(2, 0, 16), + SET_FMAN_RX_1G_LIODN(2, 1, 17), + SET_FMAN_RX_1G_LIODN(2, 2, 18), + SET_FMAN_RX_1G_LIODN(2, 3, 19), + SET_FMAN_RX_10G_LIODN(2, 0, 20), +}; +#endif +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JQ_LIODN_ENTRY(0, 146, 154), + SET_SEC_JQ_LIODN_ENTRY(1, 147, 155), + SET_SEC_JQ_LIODN_ENTRY(2, 178, 186), + SET_SEC_JQ_LIODN_ENTRY(3, 179, 187), + SET_SEC_RTIC_LIODN_ENTRY(a, 144), + SET_SEC_RTIC_LIODN_ENTRY(b, 145), + SET_SEC_RTIC_LIODN_ENTRY(c, 176), + SET_SEC_RTIC_LIODN_ENTRY(d, 177), + SET_SEC_DECO_LIODN_ENTRY(0, 129, 161), + SET_SEC_DECO_LIODN_ENTRY(1, 130, 162), + SET_SEC_DECO_LIODN_ENTRY(2, 131, 163), + SET_SEC_DECO_LIODN_ENTRY(3, 132, 164), + SET_SEC_DECO_LIODN_ENTRY(4, 133, 165), +}; + +struct liodn_id_table liodn_bases[] = { + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(96, 106), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32), +#if (CONFIG_SYS_NUM_FMAN == 2) + [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(64), +#endif +#endif +#ifdef CONFIG_SYS_DPAA_PME + [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(116, 133), +#endif +}; + +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl); +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c new file mode 100644 index 000000000..01aec6e79 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/portals.c @@ -0,0 +1,238 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +#include +#include + +static ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_CORENET_QMAN_ADDR; + +void setup_portals(void) +{ + int i; + + /* Set the Qman initiator BAR to match the LAW (for DQRR stashing) */ +#ifdef CONFIG_PHYS_64BIT + out_be32(&qman->qcsp_bare, (u32)(CONFIG_SYS_QMAN_MEM_PHYS >> 32)); +#endif + out_be32(&qman->qcsp_bar, (u32)CONFIG_SYS_QMAN_MEM_PHYS); + + for (i = 0; i < CONFIG_SYS_QMAN_NUM_PORTALS; i++) { + u8 sdest = qp_info[i].sdest; + u16 fliodn = qp_info[i].fliodn; + u16 dliodn = qp_info[i].dliodn; + u16 liodn_off = qp_info[i].liodn_offset; + + out_be32(&qman->qcsp[i].qcsp_lio_cfg, (liodn_off << 16) | + dliodn); + /* set frame liodn */ + out_be32(&qman->qcsp[i].qcsp_io_cfg, (sdest << 16) | fliodn); + } +} + +/* Update portal containter to match LAW setup of portal in phy map */ +void fdt_portal(void *blob, const char *compat, const char *container, + u64 addr, u32 size) +{ + int off; + + off = fdt_node_offset_by_compatible(blob, -1, compat); + if (off < 0) + return ; + + off = fdt_parent_offset(blob, off); + /* if non-zero assume we have a container */ + if (off > 0) { + char buf[60]; + const char *p, *name; + u32 *range; + int len; + + /* fixup ranges */ + range = fdt_getprop_w(blob, off, "ranges", &len); + if (range == NULL) { + printf("ERROR: container for %s has no ranges", compat); + return ; + } + + range[0] = 0; + if (len == 16) { + range[1] = addr >> 32; + range[2] = addr & 0xffffffff; + range[3] = size; + } else { + range[1] = addr & 0xffffffff; + range[2] = size; + } + fdt_setprop_inplace(blob, off, "ranges", range, len); + + /* fixup the name */ + name = fdt_get_name(blob, off, &len); + p = memchr(name, '@', len); + + if (p) + len = p - name; + + /* if we are given a container name check it + * against what we found, if it doesnt match exit out */ + if (container && (memcmp(container, name, len))) { + printf("WARNING: container names didn't match %s %s\n", + container, name); + return ; + } + + memcpy(&buf, name, len); + len += sprintf(&buf[len], "@%llx", addr); + fdt_set_name(blob, off, buf); + return ; + } + + printf("ERROR: %s isn't in a container. Not supported\n", compat); +} + +static int fdt_qportal(void *blob, int off, int id, char *name, + enum fsl_dpaa_dev dev, int create) +{ + int childoff, dev_off, num, ret = 0; + uint32_t dev_handle; + u32 liodns[2]; + + childoff = fdt_subnode_offset(blob, off, name); + if (create) { + if (childoff <= 0) + childoff = fdt_add_subnode(blob, off, name); + + if (childoff > 0) { + char handle[64], *p; + + strncpy(handle, name, sizeof(handle)); + p = strchr(handle, '@'); + if (!strncmp(name, "fman", 4)) { + *p = *(p + 1); + p++; + } + *p = '\0'; + + dev_off = fdt_path_offset(blob, handle); + if (dev_off < 0) + return dev_off; + + dev_handle = fdt_get_phandle(blob, dev_off); + if (dev_handle <= 0) { + dev_handle = fdt_alloc_phandle(blob); + fdt_setprop_cell(blob, dev_off, + "linux,phandle", dev_handle); + } + + ret = fdt_setprop(blob, childoff, "dev-handle", + &dev_handle, sizeof(dev_handle)); + if (ret < 0) + return ret; + + num = get_dpaa_liodn(dev, &liodns[0], id); + ret = fdt_setprop(blob, childoff, "fsl,liodn", + &liodns[0], sizeof(u32) * num); + } else { + return childoff; + } + } else { + if (childoff > 0) + ret = fdt_del_node(blob, childoff); + } + + return ret; +} + +void fdt_fixup_qportals(void *blob) +{ + int off, err; + unsigned int maj, min; + u32 rev_1 = in_be32(&qman->ip_rev_1); + char compat[64]; + int compat_len; + + maj = (rev_1 >> 8) & 0xff; + min = rev_1 & 0xff; + + compat_len = sprintf(compat, "fsl,qman-portal-%u.%u", maj, min) + 1; + compat_len += sprintf(compat + compat_len, "fsl,qman-portal") + 1; + + off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal"); + while (off != -FDT_ERR_NOTFOUND) { + u32 liodns[2]; + const int *ci = fdt_getprop(blob, off, "cell-index", NULL); + int j, i = *ci; + + err = fdt_setprop(blob, off, "compatible", compat, compat_len); + if (err < 0) + goto err; + + liodns[0] = qp_info[i].dliodn; + liodns[1] = qp_info[i].fliodn; + + err = fdt_setprop(blob, off, "fsl,liodn", + &liodns, sizeof(u32) * 2); + if (err < 0) + goto err; + + i++; + + err = fdt_qportal(blob, off, i, "crypto@0", FSL_HW_PORTAL_SEC, + IS_E_PROCESSOR(get_svr())); + if (err < 0) + goto err; + +#ifdef CONFIG_SYS_DPAA_PME + err = fdt_qportal(blob, off, i, "pme@0", FSL_HW_PORTAL_PME, 1); + if (err < 0) + goto err; +#else + fdt_qportal(blob, off, i, "pme@0", FSL_HW_PORTAL_PME, 0); +#endif +#ifdef CONFIG_SYS_DPAA_FMAN + for (j = 0; j < CONFIG_SYS_NUM_FMAN; j++) { + char name[] = "fman@0"; + + name[sizeof(name) - 2] = '0' + j; + err = fdt_qportal(blob, off, i, name, + FSL_HW_PORTAL_FMAN1 + j, 1); + if (err < 0) + goto err; + } +#endif + +err: + if (err < 0) { + printf("ERROR: unable to create props for %s: %s\n", + fdt_get_name(blob, off, NULL), fdt_strerror(err)); + return; + } + + off = fdt_node_offset_by_compatible(blob, off, "fsl,qman-portal"); + } +} diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h new file mode 100644 index 000000000..acdc99aee --- /dev/null +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -0,0 +1,142 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _FSL_LIODN_H_ +#define _FSL_LIODN_H_ + +#include + +struct liodn_id_table { + const char * compat; + u32 id[2]; + u8 num_ids; + phys_addr_t compat_offset; + unsigned long reg_offset; +}; + +extern u32 get_ppid_liodn(int ppid_tbl_idx, int ppid); +extern void set_liodns(void); +extern void fdt_fixup_liodn(void *blob); + +#define SET_LIODN_BASE_1(idA) \ + { .id = { idA }, .num_ids = 1, } + +#define SET_LIODN_BASE_2(idA, idB) \ + { .id = { idA, idB }, .num_ids = 2 } + +#define SET_LIODN_ENTRY_1(name, idA, off, compatoff) \ + { .compat = name, \ + .id = { idA }, .num_ids = 1, \ + .reg_offset = off + CONFIG_SYS_CCSRBAR, \ + .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \ + } + +#define SET_LIODN_ENTRY_2(name, idA, idB, off, compatoff) \ + { .compat = name, \ + .id = { idA, idB }, .num_ids = 2, \ + .reg_offset = off + CONFIG_SYS_CCSRBAR, \ + .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \ + } + +#define SET_GUTS_LIODN(compat, liodn, name, compatoff) \ + SET_LIODN_ENTRY_1(compat, liodn, \ + offsetof(ccsr_gur_t, name) + CONFIG_SYS_MPC85xx_GUTS_OFFSET, \ + compatoff) + +#define SET_USB_LIODN(usbNum, compat, liodn) \ + SET_GUTS_LIODN(compat, liodn, usb##usbNum##liodnr,\ + CONFIG_SYS_MPC85xx_USB##usbNum##_OFFSET) + +#define SET_SATA_LIODN(sataNum, liodn) \ + SET_GUTS_LIODN("fsl,pq-sata-v2", liodn, sata##sataNum##liodnr,\ + CONFIG_SYS_MPC85xx_SATA##sataNum##_OFFSET) + +#define SET_PCI_LIODN(pciNum, liodn) \ + SET_GUTS_LIODN("fsl,p4080-pcie", liodn, pex##pciNum##liodnr,\ + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET) + +/* reg nodes for DMA start @ 0x300 */ +#define SET_DMA_LIODN(dmaNum, liodn) \ + SET_GUTS_LIODN("fsl,eloplus-dma", liodn, dma##dmaNum##liodnr,\ + CONFIG_SYS_MPC85xx_DMA##dmaNum##_OFFSET + 0x300) + +#define SET_SDHC_LIODN(sdhcNum, liodn) \ + SET_GUTS_LIODN("fsl,esdhc", liodn, sdmmc##sdhcNum##liodnr,\ + CONFIG_SYS_MPC85xx_ESDHC_OFFSET) + +#define SET_QMAN_LIODN(liodn) \ + SET_LIODN_ENTRY_1("fsl,qman", liodn, offsetof(ccsr_qman_t, liodnr) + \ + CONFIG_SYS_FSL_CORENET_QMAN_OFFSET, \ + CONFIG_SYS_FSL_CORENET_QMAN_OFFSET) + +#define SET_BMAN_LIODN(liodn) \ + SET_LIODN_ENTRY_1("fsl,bman", liodn, offsetof(ccsr_bman_t, liodnr) + \ + CONFIG_SYS_FSL_CORENET_BMAN_OFFSET, \ + CONFIG_SYS_FSL_CORENET_BMAN_OFFSET) + +#define SET_PME_LIODN(liodn) \ + SET_LIODN_ENTRY_1("fsl,pme", liodn, offsetof(ccsr_pme_t, liodnr) + \ + CONFIG_SYS_FSL_CORENET_PME_OFFSET, \ + CONFIG_SYS_FSL_CORENET_PME_OFFSET) + +/* -1 from portID due to how immap has the registers */ +#define FM_PPID_RX_PORT_OFFSET(fmNum, portID) \ + CONFIG_SYS_FSL_FM##fmNum##_OFFSET + \ + offsetof(struct ccsr_fman, fm_bmi_common.fmbm_ppid[portID - 1]) + +/* enetNum is 0, 1, 2... so we + 8 for 1g to get to HW Port ID */ +#define SET_FMAN_RX_1G_LIODN(fmNum, enetNum, liodn) \ + SET_LIODN_ENTRY_1("fsl,fman-port-1g-rx", liodn, \ + FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \ + CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET) \ + +/* enetNum is 0, 1, 2... so we + 16 for 10g to get to HW Port ID */ +#define SET_FMAN_RX_10G_LIODN(fmNum, enetNum, liodn) \ + SET_LIODN_ENTRY_1("fsl,fman-port-10g-rx", liodn, \ + FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \ + CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET) \ + +#define SET_SEC_JQ_LIODN_ENTRY(jqNum, liodnA, liodnB) \ + SET_LIODN_ENTRY_2("fsl,sec4.0-job-queue", liodnA, liodnB,\ + offsetof(ccsr_sec_t, jqliodnr[jqNum].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, \ + CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jqNum) + +/* This is a bit evil since we treat rtic param as both a string & hex value */ +#define SET_SEC_RTIC_LIODN_ENTRY(rtic, liodnA) \ + SET_LIODN_ENTRY_1("fsl,sec4.0-rtic-memory", \ + liodnA, \ + offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, \ + CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)) + +#define SET_SEC_DECO_LIODN_ENTRY(num, liodnA, liodnB) \ + SET_LIODN_ENTRY_2(NULL, liodnA, liodnB, \ + offsetof(ccsr_sec_t, decoliodnr[num].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, 0) + +extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[]; +extern struct liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[]; +extern int liodn_tbl_sz, sec_liodn_tbl_sz; +extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz; + +#endif diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h new file mode 100644 index 000000000..cb32927a8 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_portals.h @@ -0,0 +1,59 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _FSL_PORTALS_H_ +#define _FSL_PORTALS_H_ + +/* entries must be in order and contiguous */ +enum fsl_dpaa_dev { + FSL_HW_PORTAL_SEC, +#ifdef CONFIG_SYS_DPAA_FMAN + FSL_HW_PORTAL_FMAN1, +#if (CONFIG_SYS_NUM_FMAN == 2) + FSL_HW_PORTAL_FMAN2, +#endif +#endif +#ifdef CONFIG_SYS_DPAA_PME + FSL_HW_PORTAL_PME, +#endif +}; + +struct qportal_info { + u16 dliodn; /* DQRR LIODN */ + u16 fliodn; /* frame data LIODN */ + u16 liodn_offset; + u8 sdest; +}; + +#define SET_QP_INFO(dqrr, fdata, off, dest) \ + { .dliodn = dqrr, .fliodn = fdata, .liodn_offset = off, .sdest = dest } + +extern int get_dpaa_liodn(enum fsl_dpaa_dev dpaa_dev, + u32 *liodns, int liodn_offset); +extern void setup_portals(void); +extern void fdt_fixup_qportals(void *blob); + +extern struct qportal_info qp_info[]; +extern void fdt_portal(void *blob, const char *compat, const char *container, + u64 addr, u32 size); + +#endif -- cgit v1.2.3 From 34a8258fea40283426cf47c47008f9e6d2286080 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 12 Jul 2010 22:51:29 -0500 Subject: powerpc/p4080: Add support for initializing SERDES Add support for initializing the SERDES blocks on CoreNet style QoriQ devices and the p4080 specific SERDES tables to know which actual componetns are enabled. Additionally, split out the Frame Manger (FMAN) into its specific ethernet ports instead of gross level of the full FMAN. Signed-off-by: Li Yang Signed-off-by: Roy Zang Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc85xx/Makefile | 2 + arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 212 ++++++++++++++++++++++++++ arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h | 40 +++++ arch/powerpc/cpu/mpc85xx/p4080_serdes.c | 94 ++++++++++++ arch/powerpc/include/asm/fsl_serdes.h | 11 +- 5 files changed, 357 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c create mode 100644 arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h create mode 100644 arch/powerpc/cpu/mpc85xx/p4080_serdes.c (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 6ae113acf..b7c027210 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -76,6 +76,8 @@ COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_CPM2) += serial_scc.o +COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o +COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o COBJS = $(COBJS-y) COBJS += cpu.o diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c new file mode 100644 index 000000000..1c03061f7 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -0,0 +1,212 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include "fsl_corenet_serdes.h" + +static u32 serdes_prtcl_map; + +#ifdef DEBUG +static const char *serdes_prtcl_str[] = { + [NONE] = "NA", + [PCIE1] = "PCIE1", + [PCIE2] = "PCIE2", + [PCIE3] = "PCIE3", + [PCIE4] = "PCIE4", + [SATA1] = "SATA1", + [SATA2] = "SATA2", + [SRIO1] = "SRIO1", + [SRIO2] = "SRIO2", + [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1", + [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2", + [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3", + [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4", + [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5", + [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1", + [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2", + [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3", + [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4", + [XAUI_FM1] = "XAUI_FM1", + [XAUI_FM2] = "XAUI_FM2", + [AURORA] = "DEBUG", +}; +#endif + +static const struct { + int idx; + unsigned int lpd; /* RCW lane powerdown bit */ + int bank; +} lanes[SRDS_MAX_LANES] = { + { 0, 152, FSL_SRDS_BANK_1 }, + { 1, 153, FSL_SRDS_BANK_1 }, + { 2, 154, FSL_SRDS_BANK_1 }, + { 3, 155, FSL_SRDS_BANK_1 }, + { 4, 156, FSL_SRDS_BANK_1 }, + { 5, 157, FSL_SRDS_BANK_1 }, + { 6, 158, FSL_SRDS_BANK_1 }, + { 7, 159, FSL_SRDS_BANK_1 }, + { 8, 160, FSL_SRDS_BANK_1 }, + { 9, 161, FSL_SRDS_BANK_1 }, + { 16, 162, FSL_SRDS_BANK_2 }, + { 17, 163, FSL_SRDS_BANK_2 }, + { 18, 164, FSL_SRDS_BANK_2 }, + { 19, 165, FSL_SRDS_BANK_2 }, + { 20, 170, FSL_SRDS_BANK_3 }, + { 21, 171, FSL_SRDS_BANK_3 }, + { 22, 172, FSL_SRDS_BANK_3 }, + { 23, 173, FSL_SRDS_BANK_3 }, +}; + +int serdes_get_lane_idx(int lane) +{ + return lanes[lane].idx; +} + +int serdes_get_bank(int lane) +{ + return lanes[lane].bank; +} + +int serdes_lane_enabled(int lane) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + + int bank = lanes[lane].bank; + int word = lanes[lane].lpd / 32; + int bit = lanes[lane].lpd % 32; + + if (in_be32(®s->bank[bank].rstctl) & SRDS_RSTCTL_SDPD) + return 0; + + return !(in_be32(&gur->rcwsr[word]) & (0x80000000 >> bit)); +} + +int is_serdes_configured(enum srds_prtcl device) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + /* Is serdes enabled at all? */ + if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN)) + return 0; + + return (1 << device) & serdes_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int cfg; + serdes_corenet_t *srds_regs; + int lane, bank, idx; + enum srds_prtcl lane_prtcl; + long long end_tick; + int have_bank[SRDS_MAX_BANK] = {}; + + /* Is serdes enabled at all? */ + if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN)) + return; + + srds_regs = (void *)(CONFIG_SYS_FSL_CORENET_SERDES_ADDR); + cfg = (in_be32(&gur->rcwsr[4]) & FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; + debug("Using SERDES configuration 0x%x, lane settings:\n", cfg); + + if (!is_serdes_prtcl_valid(cfg)) { + printf("SERDES[PRTCL] = 0x%x is not valid\n", cfg); + return; + } + + /* Look for banks with all lanes disabled, and power down the bank. */ + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes_get_prtcl(cfg, lane); + if (serdes_lane_enabled(lane)) { + have_bank[serdes_get_bank(lane)] = 1; + serdes_prtcl_map |= (1 << lane_prtcl); + } + } + + for (bank = 0; bank < SRDS_MAX_BANK; bank++) { + if (!have_bank[bank]) { + printf("SERDES: bank %d disabled\n", bank + 1); + setbits_be32(&srds_regs->bank[bank].rstctl, + SRDS_RSTCTL_SDPD); + } + } + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + idx = serdes_get_lane_idx(lane); + lane_prtcl = serdes_get_prtcl(cfg, lane); + +#ifdef DEBUG + switch (lane) { + case 0: + puts("Bank1: "); + break; + case 10: + puts("\nBank2: "); + break; + case 14: + puts("\nBank3: "); + break; + default: + break; + } + + printf("%s ", serdes_prtcl_str[lane_prtcl]); +#endif + } + +#ifdef DEBUG + puts("\n"); +#endif + + for (idx = 0; idx < SRDS_MAX_BANK; idx++) { + u32 rstctl; + + bank = idx; + + /* Skip disabled banks */ + if (!have_bank[bank]) + continue; + + /* reset banks for errata */ + setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_RST); + + /* wait for reset complete or 1-second timeout */ + end_tick = usec2ticks(1000000) + get_ticks(); + do { + rstctl = in_be32(&srds_regs->bank[bank].rstctl); + if (rstctl & SRDS_RSTCTL_RSTDONE) + break; + } while (end_tick > get_ticks()); + + if (!(rstctl & SRDS_RSTCTL_RSTDONE)) { + printf("SERDES: timeout resetting bank %d\n", + bank + 1); + continue; + } + } +} diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h new file mode 100644 index 000000000..4e1f33144 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h @@ -0,0 +1,40 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * Author: Roy Zang + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FSL_CORENET_SERDES_H +#define __FSL_CORENET_SERDES_H + +#define SRDS_MAX_LANES 18 +#define SRDS_MAX_BANK 3 + +enum srds_bank { + FSL_SRDS_BANK_1 = 0, + FSL_SRDS_BANK_2 = 1, + FSL_SRDS_BANK_3 = 2, +}; + +int is_serdes_prtcl_valid(u32 prtcl); +int serdes_get_lane_idx(int lane); +int serdes_get_bank(int lane); +int serdes_lane_enabled(int lane); +enum srds_prtcl serdes_get_prtcl(int cfg, int lane); + +#endif /* __FSL_CORENET_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/p4080_serdes.c b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c new file mode 100644 index 000000000..eb6223cc9 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c @@ -0,0 +1,94 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include "fsl_corenet_serdes.h" + +static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { + [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0x5] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0x8] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0xd] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM2_DTSEC3, + SGMII_FM2_DTSEC4, AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0xe] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, SGMII_FM2_DTSEC3, + SGMII_FM2_DTSEC4, AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0xf] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, AURORA, AURORA, XAUI_FM2, + XAUI_FM2, XAUI_FM2, XAUI_FM2, NONE, NONE, NONE, NONE}, + [0x10] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + NONE, NONE, NONE, NONE}, + [0x13] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0x16] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}, + [0x19] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, PCIE3, PCIE3, PCIE3, PCIE3, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}, + [0x1d] = {PCIE1, PCIE1, PCIE3, PCIE3, NONE, SRIO2, NONE, SRIO1, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0x22] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0x25] = {PCIE1, PCIE1, PCIE3, PCIE3, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, +}; + +enum srds_prtcl serdes_get_prtcl(int cfg, int lane) +{ + if (!serdes_lane_enabled(lane)) + return NONE; + + return serdes_cfg_tbl[cfg][lane]; +} + +int is_serdes_prtcl_valid(u32 prtcl) { + int i; + + if (prtcl > ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_cfg_tbl[prtcl][i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index c7877b91a..85518eb6e 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -32,8 +32,15 @@ enum srds_prtcl { SATA2, SRIO1, SRIO2, - SGMII_FM1, - SGMII_FM2, + SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, + SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, + SGMII_FM2_DTSEC4, SGMII_TSEC1, SGMII_TSEC2, SGMII_TSEC3, -- cgit v1.2.3 From 61054ffa1690b2aef4e845c6aa071840b93abff6 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 13 Jul 2010 00:39:46 -0500 Subject: powerpc/p4080: Add workaround for errata SERDES8 Signed-off-by: Scott Wood Signed-off-by: Emil Medve Signed-off-by: Ed Swarthout Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 + arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 283 ++++++++++++++++++++++++++ arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h | 4 + arch/powerpc/cpu/mpc85xx/p4080_serdes.c | 4 + 4 files changed, 295 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index d7835c8d6..01c462c4b 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -41,6 +41,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif +#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) + puts("Work-around for Erratum SERDES8 enabled\n"); +#endif + return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 1c03061f7..5bcf91abf 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -21,10 +21,14 @@ */ #include +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 +#include +#endif #include #include #include #include +#include #include "fsl_corenet_serdes.h" static u32 serdes_prtcl_map; @@ -102,6 +106,13 @@ int serdes_lane_enabled(int lane) if (in_be32(®s->bank[bank].rstctl) & SRDS_RSTCTL_SDPD) return 0; +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + if (!IS_SVR_REV(get_svr(), 1, 0)) + if (bank > 0) + return !(srds_lpd_b[bank] & + (8 >> (lane - (6 + 4 * bank)))); +#endif + return !(in_be32(&gur->rcwsr[word]) & (0x80000000 >> bit)); } @@ -116,6 +127,140 @@ int is_serdes_configured(enum srds_prtcl device) return (1 << device) & serdes_prtcl_map; } +#ifndef CONFIG_SYS_DCSRBAR_PHYS +#define CONFIG_SYS_DCSRBAR_PHYS 0x80000000 /* Must be 1GB-aligned for rev1.0 */ +#define CONFIG_SYS_DCSRBAR 0x80000000 +#define __DCSR_NOT_DEFINED_BY_CONFIG +#endif + +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 +static void enable_bank(ccsr_gur_t *gur, int bank) +{ + u32 rcw5; + + /* + * Enable the lanes SRDS_LPD_Bn. The RCW bits are read-only in + * CCSR, and read/write in DSCR. + */ + rcw5 = in_be32(gur->rcwsr + 5); + if (bank == FSL_SRDS_BANK_2) { + rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B2; + rcw5 |= srds_lpd_b[bank] << 26; + } else if (bank == FSL_SRDS_BANK_3) { + rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B3; + rcw5 |= srds_lpd_b[bank] << 18; + } else { + printf("SERDES: enable_bank: bad bank %d\n", bank + 1); + return; + } + + /* See similar code in cpu/mpc85xx/cpu_init.c for an explanation + * of the DCSR mapping. + */ + { +#ifdef __DCSR_NOT_DEFINED_BY_CONFIG + struct law_entry law = find_law(CONFIG_SYS_DCSRBAR_PHYS); + int law_index; + if (law.index == -1) + law_index = set_next_law(CONFIG_SYS_DCSRBAR_PHYS, + LAW_SIZE_1M, LAW_TRGT_IF_DCSR); + else + set_law(law.index, CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_1M, + LAW_TRGT_IF_DCSR); +#endif + u32 *p = (void *)CONFIG_SYS_DCSRBAR + 0x20114; + out_be32(p, rcw5); +#ifdef __DCSR_NOT_DEFINED_BY_CONFIG + if (law.index == -1) + disable_law(law_index); + else + set_law(law.index, law.addr, law.size, law.trgt_id); +#endif + } +} + +/* + * To avoid problems with clock jitter, rev 2 p4080 uses the pll from + * bank 3 to clock banks 2 and 3, as well as a limited selection of + * protocol configurations. This requires that banks 2 and 3's lanes be + * disabled in the RCW, and enabled with some fixup here to re-enable + * them, and to configure bank 2's clock parameters in bank 3's pll in + * cases where they differ. + */ +static void p4080_erratum_serdes8(serdes_corenet_t *regs, ccsr_gur_t *gur, + u32 devdisr, u32 devdisr2, int cfg) +{ + int srds_ratio_b2; + int rfck_sel; + + /* + * The disabled lanes of bank 2 will cause the associated + * logic blocks to be disabled in DEVDISR. We reverse that here. + * + * Note that normally it is not permitted to clear DEVDISR bits + * once the device has been disabled, but the hardware people + * say that this special case is OK. + */ + clrbits_be32(&gur->devdisr, devdisr); + clrbits_be32(&gur->devdisr2, devdisr2); + + /* + * Some protocols require special handling. There are a few + * additional protocol configurations that can be used, which are + * not listed here. See app note 4065 for supported protocol + * configurations. + */ + switch (cfg) { + case 0x19: + /* + * Bank 2 has PCIe which wants BWSEL -- tell bank 3's PLL. + * SGMII on bank 3 should still be usable. + */ + setbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr1, + SRDS_PLLCR1_PLL_BWSEL); + + enable_bank(gur, FSL_SRDS_BANK_3); + break; + + case 0x0f: + case 0x10: + /* + * Banks 2 (XAUI) and 3 (SGMII) have different clocking + * requirements in these configurations. Bank 3 cannot + * be used and should have its lanes (but not the bank + * itself) disabled in the RCW. We set up bank 3's pll + * for bank 2's needs here. + */ + srds_ratio_b2 = (in_be32(&gur->rcwsr[4]) >> 13) & 7; + + /* Determine refclock from XAUI ratio */ + switch (srds_ratio_b2) { + case 1: /* 20:1 */ + rfck_sel = SRDS_PLLCR0_RFCK_SEL_156_25; + break; + case 2: /* 25:1 */ + rfck_sel = SRDS_PLLCR0_RFCK_SEL_125; + break; + default: + printf("SERDES: bad SRDS_RATIO_B2 %d\n", + srds_ratio_b2); + return; + } + + clrsetbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr0, + SRDS_PLLCR0_RFCK_SEL_MASK, rfck_sel); + + clrsetbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr0, + SRDS_PLLCR0_FRATE_SEL_MASK, + SRDS_PLLCR0_FRATE_SEL_6_25); + break; + default: + enable_bank(gur, FSL_SRDS_BANK_3); + } + +} +#endif + void fsl_serdes_init(void) { ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -125,6 +270,13 @@ void fsl_serdes_init(void) enum srds_prtcl lane_prtcl; long long end_tick; int have_bank[SRDS_MAX_BANK] = {}; +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + u32 serdes8_devdisr = 0; + u32 serdes8_devdisr2 = 0; + char srds_lpd_opt[16]; + const char *srds_lpd_arg; + size_t arglen; +#endif /* Is serdes enabled at all? */ if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN)) @@ -139,6 +291,18 @@ void fsl_serdes_init(void) return; } +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + if (!IS_SVR_REV(get_svr(), 1, 0)) + for (bank = 1; bank < ARRAY_SIZE(srds_lpd_b); bank++) { + sprintf(srds_lpd_opt, "fsl_srds_lpd_b%u", bank + 1); + srds_lpd_arg = hwconfig_subarg("serdes", srds_lpd_opt, + &arglen); + if (srds_lpd_arg) + srds_lpd_b[bank] = simple_strtoul(srds_lpd_arg, + NULL, 0); + } +#endif + /* Look for banks with all lanes disabled, and power down the bank. */ for (lane = 0; lane < SRDS_MAX_LANES; lane++) { enum srds_prtcl lane_prtcl = serdes_get_prtcl(cfg, lane); @@ -148,6 +312,35 @@ void fsl_serdes_init(void) } } +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + if (IS_SVR_REV(get_svr(), 1, 0)) { + /* At least one bank must be disabled due to SERDES8. If + * no bank is found to be disabled based on lane + * disables, disable bank 3 because we can't turn off its + * lanes in the RCW without disabling MDIO due to erratum + * GEN8. + * + * This means that if you are relying on bank 3 being + * disabled to avoid SERDES8, in some cases you cannot + * also disable all lanes of another bank, or else bank + * 3 won't be disabled, leaving you with a configuration + * that isn't valid according to SERDES8 (e.g. if banks + * 2 and 3 have the same clock, and bank 1 is disabled + * instead of 3). + */ + for (bank = 0; bank < SRDS_MAX_BANK; bank++) { + if (!have_bank[bank]) + break; + } + + if (bank == SRDS_MAX_BANK) + have_bank[FSL_SRDS_BANK_3] = 0; + } else { + if (have_bank[FSL_SRDS_BANK_2]) + have_bank[FSL_SRDS_BANK_3] = 1; + } +#endif + for (bank = 0; bank < SRDS_MAX_BANK; bank++) { if (!have_bank[bank]) { printf("SERDES: bank %d disabled\n", bank + 1); @@ -176,6 +369,68 @@ void fsl_serdes_init(void) } printf("%s ", serdes_prtcl_str[lane_prtcl]); +#endif + +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + switch (lane_prtcl) { + case PCIE1: + case PCIE2: + case PCIE3: + serdes8_devdisr |= FSL_CORENET_DEVDISR_PCIE1 >> + (lane_prtcl - PCIE1); + break; + case SRIO1: + case SRIO2: + serdes8_devdisr |= FSL_CORENET_DEVDISR_SRIO1 >> + (lane_prtcl - SRIO1); + break; + case SGMII_FM1_DTSEC1: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | + FSL_CORENET_DEVDISR2_DTSEC1_1; + break; + case SGMII_FM1_DTSEC2: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | + FSL_CORENET_DEVDISR2_DTSEC1_2; + break; + case SGMII_FM1_DTSEC3: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | + FSL_CORENET_DEVDISR2_DTSEC1_3; + break; + case SGMII_FM1_DTSEC4: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | + FSL_CORENET_DEVDISR2_DTSEC1_4; + break; + case SGMII_FM2_DTSEC1: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | + FSL_CORENET_DEVDISR2_DTSEC2_1; + break; + case SGMII_FM2_DTSEC2: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | + FSL_CORENET_DEVDISR2_DTSEC2_2; + break; + case SGMII_FM2_DTSEC3: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | + FSL_CORENET_DEVDISR2_DTSEC2_3; + break; + case SGMII_FM2_DTSEC4: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | + FSL_CORENET_DEVDISR2_DTSEC2_4; + break; + case XAUI_FM1: + case XAUI_FM2: + if (lane_prtcl == XAUI_FM1) + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | + FSL_CORENET_DEVDISR2_10GEC1; + else + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | + FSL_CORENET_DEVDISR2_10GEC2; + break; + case AURORA: + break; + default: + break; + } + #endif } @@ -188,10 +443,38 @@ void fsl_serdes_init(void) bank = idx; +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + if (!IS_SVR_REV(get_svr(), 1, 0)) { + /* + * Change bank init order to 0, 2, 1, so that the + * third bank's PLL is established before we + * start the second bank which shares the third + * bank's PLL. + */ + + if (idx == 1) + bank = FSL_SRDS_BANK_3; + else if (idx == 2) + bank = FSL_SRDS_BANK_2; + } +#endif + /* Skip disabled banks */ if (!have_bank[bank]) continue; +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + if (!IS_SVR_REV(get_svr(), 1, 0)) { + if (idx == 1) { + p4080_erratum_serdes8(srds_regs, gur, + serdes8_devdisr, + serdes8_devdisr2, cfg); + } else if (idx == 2) { + enable_bank(gur, FSL_SRDS_BANK_2); + } + } +#endif + /* reset banks for errata */ setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_RST); diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h index 4e1f33144..42d771e09 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h @@ -37,4 +37,8 @@ int serdes_get_bank(int lane); int serdes_lane_enabled(int lane); enum srds_prtcl serdes_get_prtcl(int cfg, int lane); +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 +extern uint16_t srds_lpd_b[SRDS_MAX_BANK]; +#endif + #endif /* __FSL_CORENET_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/p4080_serdes.c b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c index eb6223cc9..87bd79529 100644 --- a/arch/powerpc/cpu/mpc85xx/p4080_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c @@ -71,6 +71,10 @@ static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, }; +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 +uint16_t srds_lpd_b[SRDS_MAX_BANK]; +#endif + enum srds_prtcl serdes_get_prtcl(int cfg, int lane) { if (!serdes_lane_enabled(lane)) -- cgit v1.2.3 From fd3c9befa83eecf6e7c6ef03c501159fbf754143 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 5 May 2010 22:35:27 -0500 Subject: powerpc/p4080: Add workaround for erratum CPU22 Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 +++- arch/powerpc/cpu/mpc85xx/cpu_init.c | 7 +++++++ arch/powerpc/cpu/mpc85xx/release.S | 6 ++++++ arch/powerpc/include/asm/processor.h | 1 + 4 files changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 01c462c4b..d73f3d7f1 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -44,7 +44,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) puts("Work-around for Erratum SERDES8 enabled\n"); #endif - +#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) + puts("Work-around for Erratum CPU22 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index a90ebb105..2c3be6dd0 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -245,6 +246,12 @@ int cpu_init_r(void) volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; #endif +#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) + flush_dcache(); + mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS)); + sync(); +#endif + puts ("L2: "); #if defined(CONFIG_L2_CACHE) diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 0b5b9da03..53cefaf00 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -136,6 +136,12 @@ __secondary_start_page: mtspr L1CSR2,r8 #endif +#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) + mfspr r8,L1CSR2 + oris r8,r8,(L1CSR2_DCWS)@h + mtspr L1CSR2,r8 +#endif + #ifdef CONFIG_BACKSIDE_L2_CACHE /* Enable/invalidate the L2 cache */ msync diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 89f283a6c..84a1e2ec0 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -495,6 +495,7 @@ #define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */ #define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */ #define SPRN_L1CSR2 0x25e /* L1 Data Cache Control and Status Register 2 */ +#define L1CSR2_DCWS 0x40000000 /* Data Cache Write Shadow */ #define SPRN_L2CSR0 0x3f9 /* L2 Data Cache Control and Status Register 0 */ #define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ #define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ -- cgit v1.2.3 From 79e4e6480b359cb28129cecfa2cae0ef9cccf803 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 14 Jul 2010 10:04:21 -0500 Subject: powerpc/8xxx: Enabled hwconfig for memory interleaving Replace environmental variables memctl_intlv_ctl and ba_intlv_ctl with hwconfig parameters. The syntax is setenv hwconfig "fsl_ddr:ctlr_intlv=,bank_intlv=" The mode values for memory controller interleaving are cacheline page bank superbank The mode values for bank interleaving are cs0_cs1 cs2_cs3 cs0_cs1_and_cs2_cs3 cs0_cs1_cs2_cs3 Signed-off-by: York Sun --- arch/powerpc/cpu/mpc8xxx/ddr/options.c | 40 +++++++++++++++++++++------------- 1 file changed, 25 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 46731c815..11281b7de 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -8,6 +8,7 @@ */ #include +#include #include #include "ddr.h" @@ -23,7 +24,6 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, unsigned int ctrl_num) { unsigned int i; - const char *p; /* Chip select options. */ @@ -221,7 +221,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, * should be a subset of the requested configuration. */ #if (CONFIG_NUM_DDR_CONTROLLERS > 1) - if ((p = getenv("memctl_intlv_ctl")) != NULL) { + if (hwconfig_sub("fsl_ddr", "ctlr_intlv")) { if (pdimm[0].n_ranks == 0) { printf("There is no rank on CS0. Because only rank on " "CS0 and ranks chip-select interleaved with CS0" @@ -230,37 +230,47 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, popts->memctl_interleaving = 0; } else { popts->memctl_interleaving = 1; - if (strcmp(p, "cacheline") == 0) + /* test null first. if CONFIG_HWCONFIG is not defined + * hwconfig_arg_cmp returns non-zero */ + if (hwconfig_subarg_cmp("fsl_ddr", "ctlr_intlv", "null")) { + popts->memctl_interleaving = 0; + debug("memory controller interleaving disabled.\n"); + } else if (hwconfig_subarg_cmp("fsl_ddr", "ctlr_intlv", "cacheline")) popts->memctl_interleaving_mode = FSL_DDR_CACHE_LINE_INTERLEAVING; - else if (strcmp(p, "page") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "ctlr_intlv", "page")) popts->memctl_interleaving_mode = FSL_DDR_PAGE_INTERLEAVING; - else if (strcmp(p, "bank") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "ctlr_intlv", "bank")) popts->memctl_interleaving_mode = FSL_DDR_BANK_INTERLEAVING; - else if (strcmp(p, "superbank") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "ctlr_intlv", "superbank")) popts->memctl_interleaving_mode = FSL_DDR_SUPERBANK_INTERLEAVING; - else - popts->memctl_interleaving_mode = - simple_strtoul(p, NULL, 0); + else { + popts->memctl_interleaving = 0; + printf("hwconfig has unrecognized parameter for ctlr_intlv.\n"); + } } } #endif - if( ((p = getenv("ba_intlv_ctl")) != NULL) && + if ((hwconfig_sub("fsl_ddr", "bank_intlv")) && (CONFIG_CHIP_SELECTS_PER_CTRL > 1)) { - if (strcmp(p, "cs0_cs1") == 0) + /* test null first. if CONFIG_HWCONFIG is not defined, + * hwconfig_arg_cmp returns non-zero */ + if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "null")) + printf("bank interleaving disabled.\n"); + else if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "cs0_cs1")) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1; - else if (strcmp(p, "cs2_cs3") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "cs2_cs3")) popts->ba_intlv_ctl = FSL_DDR_CS2_CS3; - else if (strcmp(p, "cs0_cs1_and_cs2_cs3") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "cs0_cs1_and_cs2_cs3")) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3; - else if (strcmp(p, "cs0_cs1_cs2_cs3") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "cs0_cs1_cs2_cs3")) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3; else - popts->ba_intlv_ctl = simple_strtoul(p, NULL, 0); + printf("hwconfig has unrecognized parameter for ba_intlv_ctl.\n"); switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { case FSL_DDR_CS0_CS1_CS2_CS3: -- cgit v1.2.3 From 076bff8f4746baf7c83b96049d97e9dd4454dace Mon Sep 17 00:00:00 2001 From: york Date: Fri, 2 Jul 2010 22:25:52 +0000 Subject: powerpc/8xxx: Fix bug in memctrl interleaving & bank interleaving on cs0~cs4 Verified on MPC8641HPCN with four DDR2 dimms. Each dimm has dual rank with 512MB each rank. Also check dimm size and rank size for memory controller interleaving Signed-off-by: York Sun --- arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 113 ++++++++++++++++++++----------- arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 1 + arch/powerpc/cpu/mpc8xxx/ddr/main.c | 40 +++++------ arch/powerpc/cpu/mpc8xxx/ddr/options.c | 107 ++++++++++++++++++++++++----- 4 files changed, 184 insertions(+), 77 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 4a282bc52..69c1c7cb8 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -1201,20 +1201,28 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, /* Chip Select Memory Bounds (CSn_BNDS) */ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { unsigned long long ea = 0, sa = 0; - - if (popts->ba_intlv_ctl && (i > 0) && - ((popts->ba_intlv_ctl & 0x60) != FSL_DDR_CS2_CS3 )) { - /* Don't set up boundaries for other CS - * other than CS0, if bank interleaving - * is enabled and not CS2+CS3 interleaved. + unsigned int cs_per_dimm + = CONFIG_CHIP_SELECTS_PER_CTRL / CONFIG_DIMM_SLOTS_PER_CTLR; + unsigned int dimm_number + = i / cs_per_dimm; + unsigned long long rank_density + = dimm_params[dimm_number].rank_density; + + if (((i == 1) && (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1)) || + ((i == 2) && (popts->ba_intlv_ctl & 0x04)) || + ((i == 3) && (popts->ba_intlv_ctl & FSL_DDR_CS2_CS3))) { + /* + * Don't set up boundaries for unused CS + * cs1 for cs0_cs1, cs0_cs1_and_cs2_cs3, cs0_cs1_cs2_cs3 + * cs2 for cs0_cs1_cs2_cs3 + * cs3 for cs2_cs3, cs0_cs1_and_cs2_cs3, cs0_cs1_cs2_cs3 * But we need to set the ODT_RD_CFG and * ODT_WR_CFG for CS1_CONFIG here. */ set_csn_config(i, ddr, popts, dimm_params); - break; + continue; } - - if (dimm_params[i/2].n_ranks == 0) { + if (dimm_params[dimm_number].n_ranks == 0) { debug("Skipping setup of CS%u " "because n_ranks on DIMM %u is 0\n", i, i/2); continue; @@ -1222,16 +1230,34 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, if (popts->memctl_interleaving && popts->ba_intlv_ctl) { /* * This works superbank 2CS - * There are 2 memory controllers configured + * There are 2 or more memory controllers configured * identically, memory is interleaved between them, * and each controller uses rank interleaving within * itself. Therefore the starting and ending address * on each controller is twice the amount present on * each controller. */ - unsigned long long rank_density - = dimm_params[0].capacity; - ea = (2 * (rank_density >> dbw_cap_adj)) - 1; + unsigned long long ctlr_density = 0; + switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { + case FSL_DDR_CS0_CS1: + case FSL_DDR_CS0_CS1_AND_CS2_CS3: + ctlr_density = dimm_params[0].rank_density * 2; + break; + case FSL_DDR_CS2_CS3: + ctlr_density = dimm_params[0].rank_density; + break; + case FSL_DDR_CS0_CS1_CS2_CS3: + /* + * The four CS interleaving should have been verified by + * populate_memctl_options() + */ + ctlr_density = dimm_params[0].rank_density * 4; + break; + default: + break; + } + ea = (CONFIG_NUM_DDR_CONTROLLERS * + (ctlr_density >> dbw_cap_adj)) - 1; } else if (!popts->memctl_interleaving && popts->ba_intlv_ctl) { /* @@ -1243,8 +1269,6 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, * controller needs to be programmed into its * respective CS0_BNDS. */ - unsigned long long rank_density - = dimm_params[i/2].rank_density; switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { case FSL_DDR_CS0_CS1_CS2_CS3: /* CS0+CS1+CS2+CS3 interleaving, only CS0_CNDS @@ -1257,9 +1281,13 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, /* CS0+CS1 and CS2+CS3 interleaving, CS0_CNDS * and CS2_CNDS need to be set. */ - if (!(i&1)) { - sa = dimm_params[i/2].base_address; - ea = sa + (i * (rank_density >> + if ((i == 2) && (dimm_number == 0)) { + sa = dimm_params[dimm_number].base_address + + 2 * (rank_density >> dbw_cap_adj); + ea = sa + 2 * (rank_density >> dbw_cap_adj) - 1; + } else { + sa = dimm_params[dimm_number].base_address; + ea = sa + (2 * (rank_density >> dbw_cap_adj)) - 1; } break; @@ -1267,16 +1295,31 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, /* CS0+CS1 interleaving, CS0_CNDS needs * to be set */ - sa = common_dimm->base_address; - ea = sa + (2 * (rank_density >> dbw_cap_adj))-1; + if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) { + sa = dimm_params[dimm_number].base_address; + ea = sa + (rank_density >> dbw_cap_adj) - 1; + sa += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj); + ea += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj); + } else { + sa = 0; + ea = 0; + } + if (i == 0) + ea += (rank_density >> dbw_cap_adj); break; case FSL_DDR_CS2_CS3: /* CS2+CS3 interleaving*/ - if (i == 2) { - sa = dimm_params[i/2].base_address; - ea = sa + (2 * (rank_density >> - dbw_cap_adj)) - 1; + if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) { + sa = dimm_params[dimm_number].base_address; + ea = sa + (rank_density >> dbw_cap_adj) - 1; + sa += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj); + ea += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj); + } else { + sa = 0; + ea = 0; } + if (i == 2) + ea += (rank_density >> dbw_cap_adj); break; default: /* No bank(chip-select) interleaving */ break; @@ -1292,8 +1335,6 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, * memory in the two CS0 ranks. */ if (i == 0) { - unsigned long long rank_density - = dimm_params[0].rank_density; ea = (2 * (rank_density >> dbw_cap_adj)) - 1; } @@ -1303,20 +1344,14 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, * No rank interleaving and no memory controller * interleaving. */ - unsigned long long rank_density - = dimm_params[i/2].rank_density; - sa = dimm_params[i/2].base_address; + sa = dimm_params[dimm_number].base_address; ea = sa + (rank_density >> dbw_cap_adj) - 1; - if (i&1) { - if ((dimm_params[i/2].n_ranks == 1)) { - /* Odd chip select, single-rank dimm */ - sa = 0; - ea = 0; - } else { - /* Odd chip select, dual-rank DIMM */ - sa += rank_density >> dbw_cap_adj; - ea += rank_density >> dbw_cap_adj; - } + if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) { + sa += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj); + ea += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj); + } else { + sa = 0; + ea = 0; } } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h index f1220750d..98acb8dd5 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h @@ -73,6 +73,7 @@ extern unsigned int populate_memctl_options(int all_DIMMs_registered, memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num); +extern void check_interleaving_options(fsl_ddr_info_t *pinfo); extern unsigned int mclk_to_picos(unsigned int mclk); extern unsigned int get_memory_clk_period_ps(void); diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index faa1af95e..6d582e97d 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -100,8 +100,8 @@ const char * step_to_string(unsigned int step) { int step_assign_addresses(fsl_ddr_info_t *pinfo, unsigned int dbw_cap_adj[], - unsigned int *memctl_interleaving, - unsigned int *rank_interleaving) + unsigned int *all_memctl_interleaving, + unsigned int *all_ctlr_rank_interleaving) { int i, j; @@ -152,30 +152,30 @@ int step_assign_addresses(fsl_ddr_info_t *pinfo, } } - /* - * Check if all controllers are configured for memory - * controller interleaving. - */ j = 0; - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { - if (pinfo->memctl_opts[i].memctl_interleaving) { + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) + if (pinfo->memctl_opts[i].memctl_interleaving) j++; - } - } - if (j == 2) - *memctl_interleaving = 1; + /* + * Not support less than all memory controllers interleaving + * if more than two controllers + */ + if (j == CONFIG_NUM_DDR_CONTROLLERS) + *all_memctl_interleaving = 1; /* Check that all controllers are rank interleaving. */ j = 0; - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { - if (pinfo->memctl_opts[i].ba_intlv_ctl) { + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) + if (pinfo->memctl_opts[i].ba_intlv_ctl) j++; - } - } - if (j == 2) - *rank_interleaving = 1; + /* + * All memory controllers must be populated to qualify for + * all controller rank interleaving + */ + if (j == CONFIG_NUM_DDR_CONTROLLERS) + *all_ctlr_rank_interleaving = 1; - if (*memctl_interleaving) { + if (*all_memctl_interleaving) { unsigned long long addr, total_mem_per_ctlr = 0; /* * If interleaving between memory controllers, @@ -316,7 +316,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step) &pinfo->memctl_opts[i], pinfo->dimm_params[i], i); } - + check_interleaving_options(pinfo); case STEP_ASSIGN_ADDRESSES: /* STEP 5: Assign addresses to chip selects */ step_assign_addresses(pinfo, diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 11281b7de..ebbdb69c0 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -212,10 +212,9 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, * Please refer to doc/README.fsl-ddr for the detail. * * If memory controller interleaving is enabled, then the data - * bus widths must be programmed identically for the 2 memory - * controllers. + * bus widths must be programmed identically for all memory controllers. * - * XXX: Attempt to set both controllers to the same chip select + * XXX: Attempt to set all controllers to the same chip select * interleaving mode. It will do a best effort to get the * requested ranks interleaved together such that the result * should be a subset of the requested configuration. @@ -223,15 +222,17 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, #if (CONFIG_NUM_DDR_CONTROLLERS > 1) if (hwconfig_sub("fsl_ddr", "ctlr_intlv")) { if (pdimm[0].n_ranks == 0) { - printf("There is no rank on CS0. Because only rank on " - "CS0 and ranks chip-select interleaved with CS0" + printf("There is no rank on CS0 for controller %d. Because only" + " rank on CS0 and ranks chip-select interleaved with CS0" " are controller interleaved, force non memory " - "controller interleaving\n"); + "controller interleaving\n", ctrl_num); popts->memctl_interleaving = 0; } else { popts->memctl_interleaving = 1; - /* test null first. if CONFIG_HWCONFIG is not defined - * hwconfig_arg_cmp returns non-zero */ + /* + * test null first. if CONFIG_HWCONFIG is not defined + * hwconfig_arg_cmp returns non-zero + */ if (hwconfig_subarg_cmp("fsl_ddr", "ctlr_intlv", "null")) { popts->memctl_interleaving = 0; debug("memory controller interleaving disabled.\n"); @@ -254,13 +255,12 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, } } #endif - if ((hwconfig_sub("fsl_ddr", "bank_intlv")) && (CONFIG_CHIP_SELECTS_PER_CTRL > 1)) { /* test null first. if CONFIG_HWCONFIG is not defined, * hwconfig_arg_cmp returns non-zero */ if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "null")) - printf("bank interleaving disabled.\n"); + debug("bank interleaving disabled.\n"); else if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "cs0_cs1")) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1; else if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "cs2_cs3")) @@ -270,30 +270,70 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, else if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "cs0_cs1_cs2_cs3")) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3; else - printf("hwconfig has unrecognized parameter for ba_intlv_ctl.\n"); - + printf("hwconfig has unrecognized parameter for bank_intlv.\n"); switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { case FSL_DDR_CS0_CS1_CS2_CS3: +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) + if (pdimm[0].n_ranks != 4) { + popts->ba_intlv_ctl = 0; + printf("Not enough bank(chip-select) for " + "CS0+CS1+CS2+CS3 on controller %d, " + "force non-interleaving!\n", ctrl_num); + } +#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) + if ((pdimm[0].n_ranks != 2) && (pdimm[1].n_ranks != 2)) { + popts->ba_intlv_ctl = 0; + printf("Not enough bank(chip-select) for " + "CS0+CS1+CS2+CS3 on controller %d, " + "force non-interleaving!\n", ctrl_num); + } + if (pdimm[0].capacity != pdimm[1].capacity) { + popts->ba_intlv_ctl = 0; + printf("Not identical DIMM size for " + "CS0+CS1+CS2+CS3 on controller %d, " + "force non-interleaving!\n", ctrl_num); + } +#endif + break; case FSL_DDR_CS0_CS1: if (pdimm[0].n_ranks != 2) { popts->ba_intlv_ctl = 0; printf("Not enough bank(chip-select) for " - "CS0+CS1, force non-interleaving!\n"); + "CS0+CS1 on controller %d, " + "force non-interleaving!\n", ctrl_num); } break; case FSL_DDR_CS2_CS3: - if (pdimm[1].n_ranks !=2){ +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) + if (pdimm[0].n_ranks != 4) { + popts->ba_intlv_ctl = 0; + printf("Not enough bank(chip-select) for CS2+CS3 " + "on controller %d, force non-interleaving!\n", ctrl_num); + } +#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) + if (pdimm[1].n_ranks != 2) { popts->ba_intlv_ctl = 0; - printf("Not enough bank(CS) for CS2+CS3, " - "force non-interleaving!\n"); + printf("Not enough bank(chip-select) for CS2+CS3 " + "on controller %d, force non-interleaving!\n", ctrl_num); } +#endif break; case FSL_DDR_CS0_CS1_AND_CS2_CS3: +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) + if (pdimm[0].n_ranks != 4) { + popts->ba_intlv_ctl = 0; + printf("Not enough bank(CS) for CS0+CS1 and " + "CS2+CS3 on controller %d, " + "force non-interleaving!\n", ctrl_num); + } +#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) if ((pdimm[0].n_ranks != 2)||(pdimm[1].n_ranks != 2)) { popts->ba_intlv_ctl = 0; - printf("Not enough bank(CS) for CS0+CS1 or " - "CS2+CS3, force non-interleaving!\n"); + printf("Not enough bank(CS) for CS0+CS1 and " + "CS2+CS3 on controller %d, " + "force non-interleaving!\n", ctrl_num); } +#endif break; default: popts->ba_intlv_ctl = 0; @@ -305,3 +345,34 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, return 0; } + +void check_interleaving_options(fsl_ddr_info_t *pinfo) +{ + int i, j, check_n_ranks, intlv_fixed = 0; + unsigned long long check_rank_density; + /* + * Check if all controllers are configured for memory + * controller interleaving. Identical dimms are recommended. At least + * the size should be checked. + */ + j = 0; + check_n_ranks = pinfo->dimm_params[0][0].n_ranks; + check_rank_density = pinfo->dimm_params[0][0].rank_density; + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + if ((pinfo->memctl_opts[i].memctl_interleaving) && \ + (check_rank_density == pinfo->dimm_params[i][0].rank_density) && \ + (check_n_ranks == pinfo->dimm_params[i][0].n_ranks)) { + j++; + } + } + if (j != CONFIG_NUM_DDR_CONTROLLERS) { + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) + if (pinfo->memctl_opts[i].memctl_interleaving) { + pinfo->memctl_opts[i].memctl_interleaving = 0; + intlv_fixed = 1; + } + if (intlv_fixed) + printf("Not all DIMMs are identical in size. " + "Memory controller interleaving disabled.\n"); + } +} -- cgit v1.2.3 From 5800e7ab32c200836e81ab2384817d93105561c5 Mon Sep 17 00:00:00 2001 From: york Date: Fri, 2 Jul 2010 22:25:53 +0000 Subject: powerpc/8xxx: Enable quad-rank DIMMs. Previous code presumes each DIMM has up to two rank (chip select). Newer DDR controller supports up to four chip select on one DIMM. Signed-off-by: York Sun --- arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 52 ++++++++++++++++------ .../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 12 +++++ arch/powerpc/cpu/mpc8xxx/ddr/options.c | 17 ++++--- arch/powerpc/include/asm/fsl_ddr_sdram.h | 1 + 4 files changed, 61 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 69c1c7cb8..6e73b1d31 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -93,7 +93,7 @@ static inline unsigned int compute_cas_write_latency(void) } /* Chip Select Configuration (CSn_CONFIG) */ -static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr, +static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const dimm_params_t *dimm_params) { @@ -106,28 +106,49 @@ static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr, unsigned int ba_bits_cs_n = 0; /* Num of bank bits for SDRAM on CSn */ unsigned int row_bits_cs_n = 0; /* Num of row bits for SDRAM on CSn */ unsigned int col_bits_cs_n = 0; /* Num of ocl bits for SDRAM on CSn */ + int go_config = 0; /* Compute CS_CONFIG only for existing ranks of each DIMM. */ - if ((((i&1) == 0) - && (dimm_params[i/2].n_ranks == 1)) - || (dimm_params[i/2].n_ranks == 2)) { - unsigned int n_banks_per_sdram_device; - cs_n_en = 1; - if (i == 0) { + switch (i) { + case 0: + if (dimm_params[dimm_number].n_ranks > 0) { + go_config = 1; /* These fields only available in CS0_CONFIG */ intlv_en = popts->memctl_interleaving; intlv_ctl = popts->memctl_interleaving_mode; } + break; + case 1: + if ((dimm_number == 0 && dimm_params[0].n_ranks > 1) || \ + (dimm_number == 1 && dimm_params[1].n_ranks > 0)) + go_config = 1; + break; + case 2: + if ((dimm_number == 0 && dimm_params[0].n_ranks > 2) || \ + (dimm_number > 1 && dimm_params[dimm_number].n_ranks > 0)) + go_config = 1; + break; + case 3: + if ((dimm_number == 0 && dimm_params[0].n_ranks > 3) || \ + (dimm_number == 1 && dimm_params[1].n_ranks > 1) || \ + (dimm_number == 3 && dimm_params[3].n_ranks > 0)) + go_config = 1; + break; + default: + break; + } + if (go_config) { + unsigned int n_banks_per_sdram_device; + cs_n_en = 1; ap_n_en = popts->cs_local_opts[i].auto_precharge; odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg; odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg; n_banks_per_sdram_device - = dimm_params[i/2].n_banks_per_sdram_device; + = dimm_params[dimm_number].n_banks_per_sdram_device; ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2; - row_bits_cs_n = dimm_params[i/2].n_row_addr - 12; - col_bits_cs_n = dimm_params[i/2].n_col_addr - 8; + row_bits_cs_n = dimm_params[dimm_number].n_row_addr - 12; + col_bits_cs_n = dimm_params[dimm_number].n_col_addr - 8; } - ddr->cs[i].config = (0 | ((cs_n_en & 0x1) << 31) | ((intlv_en & 0x3) << 29) @@ -521,6 +542,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int d_init; /* DRAM data initialization */ unsigned int rcw_en = 0; /* Register Control Word Enable */ unsigned int md_en = 0; /* Mirrored DIMM Enable */ + unsigned int qd_en = 0; /* quad-rank DIMM Enable */ dll_rst_dis = 1; /* Make this configurable */ dqs_cfg = popts->DQS_config; @@ -562,6 +584,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, #if defined(CONFIG_FSL_DDR3) md_en = popts->mirrored_dimm; #endif + qd_en = popts->quad_rank_present ? 1 : 0; ddr->ddr_sdram_cfg_2 = (0 | ((frc_sr & 0x1) << 31) | ((sr_ie & 0x1) << 30) @@ -569,6 +592,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, | ((dqs_cfg & 0x3) << 26) | ((odt_cfg & 0x3) << 21) | ((num_pr & 0xf) << 12) + | (qd_en << 9) | ((obc_cfg & 0x1) << 6) | ((ap_en & 0x1) << 5) | ((d_init & 0x1) << 4) @@ -1219,12 +1243,12 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, * But we need to set the ODT_RD_CFG and * ODT_WR_CFG for CS1_CONFIG here. */ - set_csn_config(i, ddr, popts, dimm_params); + set_csn_config(dimm_number, i, ddr, popts, dimm_params); continue; } if (dimm_params[dimm_number].n_ranks == 0) { debug("Skipping setup of CS%u " - "because n_ranks on DIMM %u is 0\n", i, i/2); + "because n_ranks on DIMM %u is 0\n", i, dimm_number); continue; } if (popts->memctl_interleaving && popts->ba_intlv_ctl) { @@ -1364,7 +1388,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, ); debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds); - set_csn_config(i, ddr, popts, dimm_params); + set_csn_config(dimm_number, i, ddr, popts, dimm_params); set_csn_config_2(i, ddr); } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index e888e3ea5..ce6c148d0 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -118,6 +118,18 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, temp1++; continue; } + if (dimm_params[i].n_ranks == 4 && i != 0) { + printf("Found Quad-rank DIMM in wrong bank, ignored." + " Software may not run as expected.\n"); + temp1++; + continue; + } + if (dimm_params[i].n_ranks == 4 && \ + CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) { + printf("Found Quad-rank DIMM, not able to support."); + temp1++; + continue; + } /* * Find minimum tCKmax_ps to find fastest slow speed, diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index ebbdb69c0..1d5f3e2cd 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -274,14 +274,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { case FSL_DDR_CS0_CS1_CS2_CS3: #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) - if (pdimm[0].n_ranks != 4) { + if (pdimm[0].n_ranks < 4) { popts->ba_intlv_ctl = 0; printf("Not enough bank(chip-select) for " "CS0+CS1+CS2+CS3 on controller %d, " "force non-interleaving!\n", ctrl_num); } #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) - if ((pdimm[0].n_ranks != 2) && (pdimm[1].n_ranks != 2)) { + if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) { popts->ba_intlv_ctl = 0; printf("Not enough bank(chip-select) for " "CS0+CS1+CS2+CS3 on controller %d, " @@ -296,7 +296,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, #endif break; case FSL_DDR_CS0_CS1: - if (pdimm[0].n_ranks != 2) { + if (pdimm[0].n_ranks < 2) { popts->ba_intlv_ctl = 0; printf("Not enough bank(chip-select) for " "CS0+CS1 on controller %d, " @@ -305,13 +305,13 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, break; case FSL_DDR_CS2_CS3: #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) - if (pdimm[0].n_ranks != 4) { + if (pdimm[0].n_ranks < 4) { popts->ba_intlv_ctl = 0; printf("Not enough bank(chip-select) for CS2+CS3 " "on controller %d, force non-interleaving!\n", ctrl_num); } #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) - if (pdimm[1].n_ranks != 2) { + if (pdimm[1].n_ranks < 2) { popts->ba_intlv_ctl = 0; printf("Not enough bank(chip-select) for CS2+CS3 " "on controller %d, force non-interleaving!\n", ctrl_num); @@ -320,14 +320,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, break; case FSL_DDR_CS0_CS1_AND_CS2_CS3: #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) - if (pdimm[0].n_ranks != 4) { + if (pdimm[0].n_ranks < 4) { popts->ba_intlv_ctl = 0; printf("Not enough bank(CS) for CS0+CS1 and " "CS2+CS3 on controller %d, " "force non-interleaving!\n", ctrl_num); } #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) - if ((pdimm[0].n_ranks != 2)||(pdimm[1].n_ranks != 2)) { + if ((pdimm[0].n_ranks < 2) || (pdimm[1].n_ranks < 2)) { popts->ba_intlv_ctl = 0; printf("Not enough bank(CS) for CS0+CS1 and " "CS2+CS3 on controller %d, " @@ -341,6 +341,9 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, } } + if (pdimm[0].n_ranks == 4) + popts->quad_rank_present = 1; + fsl_ddr_board_options(popts, pdimm, ctrl_num); return 0; diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 02920dbfd..431327e94 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -172,6 +172,7 @@ typedef struct memctl_options_s { unsigned int OTF_burst_chop_en; /* mirrior DIMMs for DDR3 */ unsigned int mirrored_dimm; + unsigned int quad_rank_present; /* Global Timing Parameters */ unsigned int cas_latency_override; -- cgit v1.2.3 From 7fd101c97b58dab7b0bd87f30c3dedb0db21d15f Mon Sep 17 00:00:00 2001 From: york Date: Fri, 2 Jul 2010 22:25:54 +0000 Subject: powerpc/8xxx: Enabled address hashing for 85xx For 85xx silicon which supports address hashing, it can be activated by hwconfig. Signed-off-by: York Sun --- arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 2 ++ arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 10 ++++++++++ arch/powerpc/cpu/mpc8xxx/ddr/options.c | 7 +++++++ arch/powerpc/include/asm/fsl_ddr_sdram.h | 2 ++ 4 files changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index 0691ca455..e46dcb704 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -33,6 +33,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, return; } + out_be32(&ddr->eor, regs->ddr_eor); + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { if (i == 0) { out_be32(&ddr->cs0_bnds, regs->cs[i].bnds); diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 6e73b1d31..ff0ddd189 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -1161,6 +1161,14 @@ static void set_ddr_sdram_rcw_2(fsl_ddr_cfg_regs_t *ddr) ); } +static void set_ddr_eor(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) +{ + if (popts->addr_hash) { + ddr->ddr_eor = 0x40000000; /* address hash enable */ + puts("Addess hashing enabled.\n"); + } +} + unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) { @@ -1392,6 +1400,8 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_csn_config_2(i, ddr); } + set_ddr_eor(ddr, popts); + #if !defined(CONFIG_FSL_DDR1) set_timing_cfg_0(ddr); #endif diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 1d5f3e2cd..e4805d36b 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -341,6 +341,13 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, } } + if (hwconfig_sub("fsl_ddr", "addr_hash")) { + if (hwconfig_subarg_cmp("fsl_ddr", "addr_hash", "null")) + popts->addr_hash = 0; + else if (hwconfig_subarg_cmp("fsl_ddr", "addr_hash", "true")) + popts->addr_hash = 1; + } + if (pdimm[0].n_ranks == 4) popts->quad_rank_present = 1; diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 431327e94..d576eb85e 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -119,6 +119,7 @@ typedef struct fsl_ddr_cfg_regs_s { unsigned int ddr_sr_cntr; unsigned int ddr_sdram_rcw_1; unsigned int ddr_sdram_rcw_2; + unsigned int ddr_eor; } fsl_ddr_cfg_regs_t; typedef struct memctl_options_partial_s { @@ -156,6 +157,7 @@ typedef struct memctl_options_s { unsigned int memctl_interleaving; unsigned int memctl_interleaving_mode; unsigned int ba_intlv_ctl; + unsigned int addr_hash; /* Operational mode parameters */ unsigned int ECC_mode; /* Use ECC? */ -- cgit v1.2.3 From 9490ff48648d969caeb70dbc6e506175f8699617 Mon Sep 17 00:00:00 2001 From: york Date: Fri, 2 Jul 2010 22:25:55 +0000 Subject: powerpc/8xxx: Enable DDR3 RDIMM support Enabled registered DIMMs using data from SPD. RDIMMs have registers which need to be configured before using. The register configuration words are stored in SPD byte 60~116 (JEDEC standard No.21-C). Software should read those RCWs and put into DDR controller before initialization. Signed-off-by: York Sun --- .../powerpc/cpu/mpc8xxx/ddr/common_timing_params.h | 3 + arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 81 +++++++++------------- arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 6 +- .../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 18 ++++- arch/powerpc/include/asm/fsl_ddr_dimm_params.h | 3 + 5 files changed, 58 insertions(+), 53 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h b/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h index 5aea517f2..06706ed78 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h +++ b/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h @@ -48,6 +48,9 @@ typedef struct { unsigned long long total_mem; unsigned long long base_address; + + /* DDR3 RDIMM */ + unsigned char rcw[16]; /* Register Control Word 0-15 */ } common_timing_params_t; #endif diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index ff0ddd189..b2962d26c 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -448,6 +448,35 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2); } +/* DDR SDRAM Register Control Word */ +static void set_ddr_sdram_rcw(fsl_ddr_cfg_regs_t *ddr, + const common_timing_params_t *common_dimm) +{ + if (common_dimm->all_DIMMs_registered + && !common_dimm->all_DIMMs_unbuffered) { + ddr->ddr_sdram_rcw_1 = + common_dimm->rcw[0] << 28 | \ + common_dimm->rcw[1] << 24 | \ + common_dimm->rcw[2] << 20 | \ + common_dimm->rcw[3] << 16 | \ + common_dimm->rcw[4] << 12 | \ + common_dimm->rcw[5] << 8 | \ + common_dimm->rcw[6] << 4 | \ + common_dimm->rcw[7]; + ddr->ddr_sdram_rcw_2 = + common_dimm->rcw[8] << 28 | \ + common_dimm->rcw[9] << 24 | \ + common_dimm->rcw[10] << 20 | \ + common_dimm->rcw[11] << 16 | \ + common_dimm->rcw[12] << 12 | \ + common_dimm->rcw[13] << 8 | \ + common_dimm->rcw[14] << 4 | \ + common_dimm->rcw[15]; + debug("FSLDDR: ddr_sdram_rcw_1 = 0x%08x\n", ddr->ddr_sdram_rcw_1); + debug("FSLDDR: ddr_sdram_rcw_2 = 0x%08x\n", ddr->ddr_sdram_rcw_2); + } +} + /* DDR SDRAM control configuration (DDR_SDRAM_CFG) */ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, @@ -938,6 +967,7 @@ static void set_ddr_sdram_clk_cntl(fsl_ddr_cfg_regs_t *ddr, clk_adjust = popts->clk_adjust; ddr->ddr_sdram_clk_cntl = (clk_adjust & 0xF) << 23; + debug("FSLDDR: clk_cntl = 0x%08x\n", ddr->ddr_sdram_clk_cntl); } /* DDR Initialization Address (DDR_INIT_ADDR) */ @@ -1113,54 +1143,6 @@ static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr, unsigned int sr_it) ddr->ddr_sr_cntr = (sr_it & 0xF) << 16; } -/* DDR SDRAM Register Control Word 1 (DDR_SDRAM_RCW_1) */ -static void set_ddr_sdram_rcw_1(fsl_ddr_cfg_regs_t *ddr) -{ - unsigned int rcw0 = 0; /* RCW0: Register Control Word 0 */ - unsigned int rcw1 = 0; /* RCW1: Register Control Word 1 */ - unsigned int rcw2 = 0; /* RCW2: Register Control Word 2 */ - unsigned int rcw3 = 0; /* RCW3: Register Control Word 3 */ - unsigned int rcw4 = 0; /* RCW4: Register Control Word 4 */ - unsigned int rcw5 = 0; /* RCW5: Register Control Word 5 */ - unsigned int rcw6 = 0; /* RCW6: Register Control Word 6 */ - unsigned int rcw7 = 0; /* RCW7: Register Control Word 7 */ - - ddr->ddr_sdram_rcw_1 = (0 - | ((rcw0 & 0xF) << 28) - | ((rcw1 & 0xF) << 24) - | ((rcw2 & 0xF) << 20) - | ((rcw3 & 0xF) << 16) - | ((rcw4 & 0xF) << 12) - | ((rcw5 & 0xF) << 8) - | ((rcw6 & 0xF) << 4) - | ((rcw7 & 0xF) << 0) - ); -} - -/* DDR SDRAM Register Control Word 2 (DDR_SDRAM_RCW_2) */ -static void set_ddr_sdram_rcw_2(fsl_ddr_cfg_regs_t *ddr) -{ - unsigned int rcw8 = 0; /* RCW0: Register Control Word 8 */ - unsigned int rcw9 = 0; /* RCW1: Register Control Word 9 */ - unsigned int rcw10 = 0; /* RCW2: Register Control Word 10 */ - unsigned int rcw11 = 0; /* RCW3: Register Control Word 11 */ - unsigned int rcw12 = 0; /* RCW4: Register Control Word 12 */ - unsigned int rcw13 = 0; /* RCW5: Register Control Word 13 */ - unsigned int rcw14 = 0; /* RCW6: Register Control Word 14 */ - unsigned int rcw15 = 0; /* RCW7: Register Control Word 15 */ - - ddr->ddr_sdram_rcw_2 = (0 - | ((rcw8 & 0xF) << 28) - | ((rcw9 & 0xF) << 24) - | ((rcw10 & 0xF) << 20) - | ((rcw11 & 0xF) << 16) - | ((rcw12 & 0xF) << 12) - | ((rcw13 & 0xF) << 8) - | ((rcw14 & 0xF) << 4) - | ((rcw15 & 0xF) << 0) - ); -} - static void set_ddr_eor(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) { if (popts->addr_hash) { @@ -1430,8 +1412,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_sr_cntr(ddr, sr_it); - set_ddr_sdram_rcw_1(ddr); - set_ddr_sdram_rcw_2(ddr); + set_ddr_sdram_rcw(ddr, common_dimm); return check_fsl_memctl_config_regs(ddr); } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c index d4199baa8..29cea5326 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c @@ -90,6 +90,7 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, { unsigned int retval; unsigned int mtb_ps; + int i; if (spd->mem_type) { if (spd->mem_type != SPD_MEMTYPE_DDR3) { @@ -131,8 +132,11 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, case 0x01: /* RDIMM */ case 0x05: /* Mini-RDIMM */ pdimm->registered_dimm = 1; /* register buffered */ + for (i = 0; i < 16; i += 2) { + pdimm->rcw[i] = spd->mod_section.registered.rcw[i/2] & 0x0F; + pdimm->rcw[i+1] = (spd->mod_section.registered.rcw[i/2] >> 4) & 0x0F; + } break; - case 0x02: /* UDIMM */ case 0x03: /* SO-DIMM */ case 0x04: /* Micro-DIMM */ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index ce6c148d0..029e566b6 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -76,7 +76,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, unsigned int number_of_dimms) { - unsigned int i; + unsigned int i, j; unsigned int tCKmin_X_ps = 0; unsigned int tCKmax_ps = 0xFFFFFFFF; @@ -98,7 +98,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, unsigned int tDQSQ_max_ps = 0; unsigned int tQHS_ps = 0; - unsigned int temp1, temp2; + unsigned int temp1, temp2, temp3; unsigned int additive_latency = 0; #if !defined(CONFIG_FSL_DDR3) const unsigned int mclk_ps = get_memory_clk_period_ps(); @@ -231,6 +231,20 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, "DIMMs detected!\n"); } + temp1 = 0; + if (outpdimm->all_DIMMs_registered) + for (j = 0; j < 16; j++) { + outpdimm->rcw[j] = dimm_params[0].rcw[j]; + for (i = 1; i < number_of_dimms; i++) + if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) { + temp3 = 1; + break; + } + } + + if (temp1 != 0) + printf("ERROR: Mix different RDIMM detected!\n"); + #if defined(CONFIG_FSL_DDR3) if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms)) return 1; diff --git a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h index 55923e09b..be8260277 100644 --- a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h +++ b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h @@ -81,6 +81,9 @@ typedef struct dimm_params_s { unsigned int tRTP_ps; /* byte 38, spd->trtp */ unsigned int tDQSQ_max_ps; /* byte 44, spd->tdqsq */ unsigned int tQHS_ps; /* byte 45, spd->tqhs */ + + /* DDR3 RDIMM */ + unsigned char rcw[16]; /* Register Control Word 0-15 */ } dimm_params_t; extern unsigned int ddr_compute_dimm_parameters( -- cgit v1.2.3 From 5fb8a8a7315689cfbc81ec596cce160ee2ec6562 Mon Sep 17 00:00:00 2001 From: york Date: Fri, 2 Jul 2010 22:25:56 +0000 Subject: powerpc/8xxx: Improvement to DDR parameters Changes for P2020DS DDR applies to other 8xxx platform Signed-off-by: York Sun --- arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 14 +++++++------- arch/powerpc/cpu/mpc8xxx/ddr/options.c | 1 + 2 files changed, 8 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index b2962d26c..dccb7aa14 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -199,7 +199,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr) unsigned char act_pd_exit_mclk; /* Precharge powerdown exit timing (tXP). */ unsigned char pre_pd_exit_mclk; - /* Precharge powerdown exit timing (tAXPD). */ + /* ODT powerdown exit timing (tAXPD). */ unsigned char taxpd_mclk; /* Mode register set cycle time (tMRD). */ unsigned char tmrd_mclk; @@ -211,13 +211,13 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr) * we use the tXP instead of it. * tXP=max(3nCK, 7.5ns) for DDR3. * spec has not the tAXPD, we use - * tAXPD=8, need design to confirm. + * tAXPD=1, need design to confirm. */ int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */ act_pd_exit_mclk = picos_to_mclk(tXP); /* Mode register MR0[A12] is '1' - fast exit */ pre_pd_exit_mclk = act_pd_exit_mclk; - taxpd_mclk = 8; + taxpd_mclk = 1; tmrd_mclk = 4; /* set the turnaround time */ trwt_mclk = 1; @@ -1031,9 +1031,9 @@ static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr) unsigned int wodt_off = 0; /* Write to ODT off */ #if defined(CONFIG_FSL_DDR3) - rodt_on = 3; /* 2 clocks */ + rodt_on = 2; /* 2 clocks */ rodt_off = 4; /* 4 clocks */ - wodt_on = 2; /* 1 clocks */ + wodt_on = 1; /* 1 clocks */ wodt_off = 4; /* 4 clocks */ #endif @@ -1106,9 +1106,9 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en, /* * Write leveling repetition time * at least tWLO + 6 clocks clocks - * we set it 32 + * we set it 64 */ - wrlvl_wlr = 0x5; + wrlvl_wlr = 0x6; /* * Write leveling start time * The value use for the DQS_ADJUST for the first sample diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index e4805d36b..774c0e4b4 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -204,6 +204,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, * meet the tQDSS under different loading. */ popts->wrlvl_en = 1; + popts->zq_en = 1; popts->wrlvl_override = 0; #endif -- cgit v1.2.3 From c8cf4fc40757fa08af835dd886d9f7dacb515683 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 23 Jul 2010 04:24:46 -0400 Subject: Blackfin: gpio: use common usage func Signed-off-by: Mike Frysinger --- arch/blackfin/cpu/cmd_gpio.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/cpu/cmd_gpio.c b/arch/blackfin/cpu/cmd_gpio.c index 9e505b661..4430c90d4 100644 --- a/arch/blackfin/cpu/cmd_gpio.c +++ b/arch/blackfin/cpu/cmd_gpio.c @@ -26,11 +26,9 @@ int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } - if (argc != 3) { + if (argc != 3) show_usage: - printf("Usage:\n%s\n", cmdtp->usage); - return 1; - } + return cmd_usage(cmdtp); /* parse the behavior */ ulong sub_cmd; -- cgit v1.2.3 From a37c36f4e70bada297f281b0e542539ad43e50f6 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 14 Jul 2010 19:47:29 -0500 Subject: powerpc/8xxx: query feature reporting register for num cores on unknown cpus doing so helps avant garde users, such as those using simulators that allow users to configure the number of cores, so as to not have to manually adjust u-boot sources. h/w should also be reliably setting FRR NCPU in the future. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc8xxx/cpu.c | 10 ++++++++-- arch/powerpc/include/asm/immap_85xx.h | 2 ++ 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index dc3da1689..97a94f4cd 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -110,8 +110,14 @@ struct cpu_type *identify_cpu(u32 ver) } int cpu_numcores() { - struct cpu_type *cpu; - cpu = gd->cpu; + ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC85xx_PIC_ADDR; + struct cpu_type *cpu = gd->cpu; + + /* better to query feature reporting register than just assume 1 */ + if (cpu == &cpu_type_unknown) + return ((in_be32(&pic->frr) & MPC85xx_PICFRR_NCPU_MASK) >> + MPC85xx_PICFRR_NCPU_SHIFT) + 1; + return cpu->num_cores; } diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index f109e8c5c..c1382c8c5 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -760,6 +760,8 @@ typedef struct ccsr_pic { u32 eoi; /* End Of IRQ */ u8 res9[3916]; u32 frr; /* Feature Reporting */ +#define MPC85xx_PICFRR_NCPU_MASK 0x00001f00 +#define MPC85xx_PICFRR_NCPU_SHIFT 8 u8 res10[28]; u32 gcr; /* Global Configuration */ #define MPC85xx_PICGCR_RST 0x80000000 -- cgit v1.2.3 From cdb749778aa3a8f8d2a41dd4ad811ef822aecfe6 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sat, 24 Jul 2010 21:55:43 +0200 Subject: Rename getenv_r() into getenv_f() While running from flash, i. e. before relocation, we have only a limited C runtime environment without writable data segment. In this phase, some configurations (for example with environment in EEPROM) must not use the normal getenv(), but a special function. This function had been called getenv_r(), with the idea that the "_r" suffix would mean the same as in the _r_eentrant versions of some of the C library functions (for example getdate vs. getdate_r, getgrent vs. getgrent_r, etc.). Unfortunately this was a misleading name, as in U-Boot the "_r" generally means "running from RAM", i. e. _after_ relocation. To avoid confusion, rename into getenv_f() [as "running from flash"] Signed-off-by: Wolfgang Denk Acked-by: Detlev Zundel --- arch/arm/lib/board.c | 2 +- arch/avr32/lib/board.c | 2 +- arch/blackfin/lib/board.c | 2 +- arch/blackfin/lib/post.c | 2 +- arch/i386/lib/board.c | 2 +- arch/m68k/lib/board.c | 6 +++--- arch/mips/cpu/incaip_clock.c | 2 +- arch/mips/lib/board.c | 2 +- arch/powerpc/cpu/mpc8xx/speed.c | 2 +- arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c | 2 +- arch/powerpc/lib/board.c | 6 +++--- arch/sparc/lib/board.c | 2 +- 12 files changed, 16 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index f5660a985..54519b0e1 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -125,7 +125,7 @@ void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off"))); static int init_baudrate (void) { char tmp[64]; /* long enough for environment variables */ - int i = getenv_r ("baudrate", tmp, sizeof (tmp)); + int i = getenv_f("baudrate", tmp, sizeof (tmp)); gd->bd->bi_baudrate = gd->baudrate = (i > 0) ? (int) simple_strtoul (tmp, NULL, 10) : CONFIG_BAUDRATE; diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c index 254aecff5..9e741d22e 100644 --- a/arch/avr32/lib/board.c +++ b/arch/avr32/lib/board.c @@ -102,7 +102,7 @@ static int init_baudrate(void) char tmp[64]; int i; - i = getenv_r("baudrate", tmp, sizeof(tmp)); + i = getenv_f("baudrate", tmp, sizeof(tmp)); if (i > 0) { gd->baudrate = simple_strtoul(tmp, NULL, 10); } else { diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 4e9bb1922..2d3230cd6 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -64,7 +64,7 @@ static int display_banner(void) static int init_baudrate(void) { char baudrate[15]; - int i = getenv_r("baudrate", baudrate, sizeof(baudrate)); + int i = getenv_f("baudrate", baudrate, sizeof(baudrate)); gd->bd->bi_baudrate = gd->baudrate = (i > 0) ? simple_strtoul(baudrate, NULL, 10) : CONFIG_BAUDRATE; diff --git a/arch/blackfin/lib/post.c b/arch/blackfin/lib/post.c index faf6b96ba..bd6aaf5d4 100644 --- a/arch/blackfin/lib/post.c +++ b/arch/blackfin/lib/post.c @@ -168,7 +168,7 @@ static void post_get_flags(int *test_flags) } for (i = 0; i < varnum; i++) { - if (getenv_r(var[i], list, sizeof(list)) <= 0) + if (getenv_f(var[i], list, sizeof(list)) <= 0) continue; for (j = 0; j < post_list_size; j++) { diff --git a/arch/i386/lib/board.c b/arch/i386/lib/board.c index 0adc66455..684cdb84a 100644 --- a/arch/i386/lib/board.c +++ b/arch/i386/lib/board.c @@ -69,7 +69,7 @@ const char version_string[] = static int init_baudrate (void) { char tmp[64]; /* long enough for environment variables */ - int i = getenv_r("baudrate", tmp, 64); + int i = getenv_f("baudrate", tmp, 64); gd->baudrate = (i != 0) ? (int) simple_strtoul (tmp, NULL, 10) diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 732023d67..b254079ae 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -134,7 +134,7 @@ typedef int (init_fnc_t) (void); static int init_baudrate (void) { char tmp[64]; /* long enough for environment variables */ - int i = getenv_r ("baudrate", tmp, sizeof (tmp)); + int i = getenv_f("baudrate", tmp, sizeof (tmp)); gd->baudrate = (i > 0) ? (int) simple_strtoul (tmp, NULL, 10) @@ -278,7 +278,7 @@ board_init_f (ulong bootflag) /* * reserve protected RAM */ - i = getenv_r ("pram", tmp, sizeof (tmp)); + i = getenv_f("pram", tmp, sizeof (tmp)); reg = (i > 0) ? simple_strtoul (tmp, NULL, 10) : CONFIG_PRAM; addr -= (reg << 10); /* size is in kB */ debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr); @@ -549,7 +549,7 @@ void board_init_r (gd_t *id, ulong dest_addr) * Fill in missing fields of bd_info. * We do this here, where we have "normal" access to the * environment; we used to do this still running from ROM, - * where had to use getenv_r(), which can be pretty slow when + * where had to use getenv_f(), which can be pretty slow when * the environment is in EEPROM. */ bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); diff --git a/arch/mips/cpu/incaip_clock.c b/arch/mips/cpu/incaip_clock.c index fc2c62180..b65dfe0e1 100644 --- a/arch/mips/cpu/incaip_clock.c +++ b/arch/mips/cpu/incaip_clock.c @@ -105,7 +105,7 @@ int incaip_set_cpuclk (void) char tmp[64]; ulong cpuclk; - if (getenv_r ("cpuclk", tmp, sizeof (tmp)) > 0) { + if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0) { cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000; cgu_init (cpuclk); ebu_init (cpuclk); diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index b2d113e87..ab4a17c94 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -114,7 +114,7 @@ static void display_flash_config(ulong size) static int init_baudrate (void) { char tmp[64]; /* long enough for environment variables */ - int i = getenv_r ("baudrate", tmp, sizeof (tmp)); + int i = getenv_f("baudrate", tmp, sizeof (tmp)); gd->baudrate = (i > 0) ? (int) simple_strtoul (tmp, NULL, 10) diff --git a/arch/powerpc/cpu/mpc8xx/speed.c b/arch/powerpc/cpu/mpc8xx/speed.c index f309f29c0..6e13e5de0 100644 --- a/arch/powerpc/cpu/mpc8xx/speed.c +++ b/arch/powerpc/cpu/mpc8xx/speed.c @@ -266,7 +266,7 @@ int get_clocks_866 (void) long cpuclk = 0; long sccr_reg; - if (getenv_r ("cpuclk", tmp, sizeof (tmp)) > 0) + if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0) cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000; if ((CONFIG_SYS_8xx_CPUCLK_MIN > cpuclk) || (CONFIG_SYS_8xx_CPUCLK_MAX < cpuclk)) diff --git a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c index 2fee99569..2cfc37f75 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c @@ -985,7 +985,7 @@ u32 DQS_autocalibration(void) puts(str); #if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION) - i = getenv_r("autocalib", tmp, sizeof(tmp)); + i = getenv_f("autocalib", tmp, sizeof(tmp)); if (i < 0) strcpy(tmp, CONFIG_AUTOCALIB); diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 7b09fb51e..0e00d8619 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -169,7 +169,7 @@ typedef int (init_fnc_t) (void); static int init_baudrate (void) { char tmp[64]; /* long enough for environment variables */ - int i = getenv_r ("baudrate", tmp, sizeof (tmp)); + int i = getenv_f("baudrate", tmp, sizeof (tmp)); gd->baudrate = (i > 0) ? (int) simple_strtoul (tmp, NULL, 10) @@ -442,7 +442,7 @@ void board_init_f (ulong bootflag) /* * reserve protected RAM */ - i = getenv_r ("pram", (char *)tmp, sizeof (tmp)); + i = getenv_f("pram", (char *)tmp, sizeof (tmp)); reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM; addr -= (reg << 10); /* size is in kB */ debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr); @@ -790,7 +790,7 @@ void board_init_r (gd_t *id, ulong dest_addr) * Fill in missing fields of bd_info. * We do this here, where we have "normal" access to the * environment; we used to do this still running from ROM, - * where had to use getenv_r(), which can be pretty slow when + * where had to use getenv_f(), which can be pretty slow when * the environment is in EEPROM. */ diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index b776c21d6..4f6970965 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -88,7 +88,7 @@ ulong monitor_flash_len; static int init_baudrate(void) { char tmp[64]; /* long enough for environment variables */ - int i = getenv_r("baudrate", tmp, sizeof(tmp)); + int i = getenv_f("baudrate", tmp, sizeof(tmp)); gd->baudrate = (i > 0) ? (int)simple_strtoul(tmp, NULL, 10) -- cgit v1.2.3