From c0d660fbbede322648ec79d3e39389e48f5fab24 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Fri, 21 Aug 2009 16:21:58 -0500 Subject: mpc83xx: sbc8349 - make enabling PCI more user friendly Prior to this commit, to enable PCI, you had to go manually edit the board config header, which isn't really user friendly. This adds the typical PCI make targets to the toplevel Makefile in accordance with what is being done with other boards. Signed-off-by: Paul Gortmaker Signed-off-by: Kim Phillips --- Makefile | 19 ++++++++++++++++-- doc/README.sbc8349 | 50 ++++++++++++++++++++++++++++++++--------------- include/configs/sbc8349.h | 22 ++++++++++++--------- 3 files changed, 64 insertions(+), 27 deletions(-) diff --git a/Makefile b/Makefile index 2636ac055..96cca232b 100644 --- a/Makefile +++ b/Makefile @@ -2380,8 +2380,23 @@ MPC837XERDB_config: unconfig MVBLM7_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision -sbc8349_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 +sbc8349_config \ +sbc8349_PCI_33_config \ +sbc8349_PCI_66_config: unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _PCI_,$@)" ] ; then \ + $(XECHO) -n "... PCI HOST at " ; \ + echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ + fi ; \ + if [ "$(findstring _33_,$@)" ] ; then \ + $(XECHO) -n "33MHz... " ; \ + echo "#define PCI_33M" >>$(obj)include/config.h ; \ + fi ; \ + if [ "$(findstring _66_,$@)" ] ; then \ + $(XECHO) -n "66MHz... " ; \ + echo "#define PCI_66M" >>$(obj)include/config.h ; \ + fi ; + @$(MKCONFIG) -a sbc8349 ppc mpc83xx sbc8349 SIMPC8313_LP_config \ SIMPC8313_SP_config: unconfig diff --git a/doc/README.sbc8349 b/doc/README.sbc8349 index 908e7680a..2c35919f2 100644 --- a/doc/README.sbc8349 +++ b/doc/README.sbc8349 @@ -91,19 +91,37 @@ safety check before resetting the board upon completion of the reflash. PCI: ==== -This board and U-Boot have been tested with PCI built in, on a SBC8349 -and confirmed that the "pci" command showed the intel e1000 that was -present in the PCI slot. Note that if a 33MHz 32bit card is inserted -in the slot, then the whole board will clock down to a 33MHz base -clock instead of the default 66MHz. This will change the baud clocks -and mess up your serial console output. If you want to use a 33MHz PCI -card, then you should build a U-Boot with #undef PCI_66M in the -include/configs/sbc8349.h and store this to flash prior to powering down -the board and inserting the 33MHz PCI card. - -By default PCI support is disabled to better support very early -revision MPC834x chips with possible PCI issues. Also PCI support is -untested on the sbc8347 variants at this point in time. - - - Paul Gortmaker, 01/2007 +There are three configuration choices: + sbc8349_config + sbc8349_PCI_33_config + sbc8349_PCI_66_config + +The 1st does not enable CONFIG_PCI, and assumes that the PCI slot +will be left empty (M66EN high), and so the board will operate with +a base clock of 66MHz. Note that you need both PCI enabled in u-boot +and linux in order to have functional PCI under linux. The only +reason for choosing to not enable PCI would be if you had a very +early (rev 1.0) CPU with possible PCI issues. + +The second enables PCI support and builds for a 33MHz clock rate. Note +that if a 33MHz 32bit card is inserted in the slot, then the whole board +will clock down to a 33MHz base clock instead of the default 66MHz. This +will change the baud clocks and mess up your serial console output if you +were previously running at 66MHz. If you want to use a 33MHz PCI card, +then you should build a U-Boot with sbc8349_PCI_33_config and store this +to flash prior to powering down the board and inserting the 33MHz PCI +card. + +The third option builds PCI support in, and leaves the clocking at the +default 66MHz. This has been tested with an intel PCI-X e1000 card. +This is also the appropriate choice for people with a recent (non 1.0) +CPU who currently have the PCI slot physically empty, but intend to +possibly add a PCI-X card at a later date. + + => pci + Scanning PCI devices on bus 0 + BusDevFun VendorId DeviceId Device Class Sub-Class + _____________________________________________________________ + 00.00.00 0x1957 0x0080 Processor 0x20 + 00.11.00 0x8086 0x1026 Network controller 0x00 + => diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 868bd54a6..088b28356 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -40,24 +40,28 @@ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_SBC8349 1 /* WRS SBC8349 board specific */ -#undef CONFIG_PCI /* Don't enable PCI2 on sbc834x - it doesn't exist physically. */ #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ -#define PCI_66M -#ifdef PCI_66M -#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ -#else +/* + * The default if PCI isn't enabled, or if no PCI clk setting is given + * is 66MHz; this is what the board defaults to when the PCI slot is + * physically empty. The board will automatically (i.e w/o jumpers) + * clock down to 33MHz if you insert a 33MHz PCI card. + */ +#ifdef PCI_33M #define CONFIG_83XX_CLKIN 33000000 /* in Hz */ +#else /* 66M */ +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ #endif #ifndef CONFIG_SYS_CLK_FREQ -#ifdef PCI_66M -#define CONFIG_SYS_CLK_FREQ 66000000 -#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 -#else +#ifdef PCI_33M #define CONFIG_SYS_CLK_FREQ 33000000 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 +#else /* 66M */ +#define CONFIG_SYS_CLK_FREQ 66000000 +#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 #endif #endif -- cgit v1.2.3 From 193b4cb3f641ed0fd9bb79b8fa4671882c50ffdb Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Fri, 21 Aug 2009 16:27:05 -0500 Subject: mpc83xx: mpc8349 - delete unused SYS_MID_FLASH_JUMP This was introduced with the MPC8349EMDS board, and then copied to a couple other boards by nature of being the reference implementation. u-boot$git grep CONFIG_SYS_MID_FLASH_JUMP include/configs/MPC8349EMDS.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000 include/configs/sbc8349.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000 include/configs/vme8349.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000 u-boot$ It currently isn't used, so delete it before it spreads further. Signed-off-by: Paul Gortmaker Signed-off-by: Kim Phillips --- include/configs/MPC8349EMDS.h | 1 - include/configs/sbc8349.h | 1 - include/configs/vme8349.h | 1 - 3 files changed, 3 deletions(-) diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 3cf59efa0..a8c8a7987 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -172,7 +172,6 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 088b28356..4f2aef096 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -157,7 +157,6 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 1477552df..35d367da4 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -152,7 +152,6 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase TO (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO (ms) */ -#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -- cgit v1.2.3 From 6d2c26ac831f033b0025cfb256365a047f8dd115 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 21 Aug 2009 16:30:30 -0500 Subject: mpc83xx: add missing CSCONFIG_ODT_WR_CFG for 832x CPUs Signed-off-by: Heiko Schocher Signed-off-by: Kim Phillips --- include/mpc83xx.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/mpc83xx.h b/include/mpc83xx.h index fd742c780..44115c91b 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -837,6 +837,9 @@ #define CSCONFIG_EN 0x80000000 #define CSCONFIG_AP 0x00800000 #define CSCONFIG_ODT_WR_ACS 0x00010000 +#if defined(CONFIG_MPC832x) +#define CSCONFIG_ODT_WR_CFG 0x00040000 +#endif #define CSCONFIG_BANK_BIT_3 0x00004000 #define CSCONFIG_ROW_BIT 0x00000700 #define CSCONFIG_ROW_BIT_12 0x00000000 -- cgit v1.2.3 From 27c5248dd4c9ba4a36899689595956c5e59e349a Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 21 Aug 2009 16:31:20 -0500 Subject: mpc83xx: tqm8349 - remove pci & flash window conflict commit 9993e196da707a0a1cd4584f1fcef12382c1c144 "mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCI" remapped pci windows on tqm834x to make it more consistent with the other 83xx boards. During that time however, the author failed to realize that FLASH_BASE was occupying the same range as what PCI1_MEM_BASE was being assigned. Signed-off-by: Kim Phillips Tested-by: Wolfgang Denk --- include/configs/TQM834x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 492bdccb5..da08b7c21 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -250,7 +250,7 @@ extern int tqm834x_num_flash_banks; #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ /* PCI1 host bridge */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI1_MEM_BASE 0x90000000 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ #define CONFIG_SYS_PCI1_MMIO_BASE (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) -- cgit v1.2.3 From 8eceeb7fd656d6d071c0a8b615e178aca5775fff Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 21 Aug 2009 16:33:15 -0500 Subject: mpc83xx: mpc8377erdb - change DDR settings to those from latest bsp when using Linus' 83xx_defconfig, the mpc8377rdb would hang at boot at either: NET: Registered protocol family 16 or the io scheduler cfq registered message. Fixing up these DDR settings appears to fix the problem. Signed-off-by: Kim Phillips --- include/configs/MPC837XERDB.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index b637f7395..ca89b9be4 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -190,8 +190,8 @@ /* 0x3937d322 */ #define CONFIG_SYS_DDR_TIMING_2 0x02984cc8 -#define CONFIG_SYS_DDR_INTERVAL ((1545 << SDRAM_INTERVAL_REFINT_SHIFT) \ - | (256 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) +#define CONFIG_SYS_DDR_INTERVAL ((1024 << SDRAM_INTERVAL_REFINT_SHIFT) \ + | (0 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) /* 0x06090100 */ #if defined(CONFIG_DDR_2T_TIMING) @@ -205,7 +205,7 @@ /* 0x43000000 */ #endif #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */ -#define CONFIG_SYS_DDR_MODE ((0x0440 << SDRAM_MODE_ESD_SHIFT) \ +#define CONFIG_SYS_DDR_MODE ((0x0406 << SDRAM_MODE_ESD_SHIFT) \ | (0x0442 << SDRAM_MODE_SD_SHIFT)) /* 0x04400442 */ /* DDR400 */ #define CONFIG_SYS_DDR_MODE2 0x00000000 -- cgit v1.2.3 From 79f516bccc3cff5a5cd4b3dffb7d254e746fdbde Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 21 Aug 2009 16:34:38 -0500 Subject: mpc83xx: accommodate larger kernel sizes by default linux mpc83xx_defconfig kernels are getting bigger, accommodate for their growth by adjusting default load and fdt addresses. Signed-off-by: Kim Phillips --- include/configs/MPC8313ERDB.h | 4 ++-- include/configs/MPC8315ERDB.h | 4 ++-- include/configs/MPC8323ERDB.h | 4 ++-- include/configs/MPC832XEMDS.h | 4 ++-- include/configs/MPC8349EMDS.h | 4 ++-- include/configs/MPC8360EMDS.h | 4 ++-- include/configs/MPC837XEMDS.h | 4 ++-- include/configs/MPC837XERDB.h | 4 ++-- include/configs/sbc8349.h | 4 ++-- include/configs/vme8349.h | 4 ++-- 10 files changed, 20 insertions(+), 20 deletions(-) diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index d9aa60bcd..4bf05d203 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -594,7 +594,7 @@ #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #define CONFIG_FDTFILE mpc8313erdb.dtb -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 @@ -611,7 +611,7 @@ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ - "fdtaddr=400000\0" \ + "fdtaddr=780000\0" \ "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ "console=ttyS0\0" \ "setbootargs=setenv bootargs " \ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index d5e62e347..84cc9fa41 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -566,7 +566,7 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ @@ -576,7 +576,7 @@ "consoledev=ttyS0\0" \ "ramdiskaddr=1000000\0" \ "ramdiskfile=ramfs.83xx\0" \ - "fdtaddr=400000\0" \ + "fdtaddr=780000\0" \ "fdtfile=mpc8315erdb.dtb\0" \ "usb_phy_type=utmi\0" \ "" diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 907965d65..c40d3d3f4 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -542,7 +542,7 @@ #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #define CONFIG_FDTFILE mpc832x_rdb.dtb -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 @@ -558,7 +558,7 @@ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ - "fdtaddr=400000\0" \ + "fdtaddr=780000\0" \ "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ "ramdiskaddr=1000000\0" \ "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0" \ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 4e23a1174..f16616c0d 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -548,7 +548,7 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ @@ -558,7 +558,7 @@ "consoledev=ttyS0\0" \ "ramdiskaddr=1000000\0" \ "ramdiskfile=ramfs.83xx\0" \ - "fdtaddr=400000\0" \ + "fdtaddr=780000\0" \ "fdtfile=mpc832x_mds.dtb\0" \ "" diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index a8c8a7987..1d736f32a 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -700,7 +700,7 @@ #define CONFIG_GATEWAYIP 192.168.1.1 #define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ @@ -731,7 +731,7 @@ "update=protect off fe000000 fe03ffff; " \ "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0" \ "upd=run load update\0" \ - "fdtaddr=400000\0" \ + "fdtaddr=780000\0" \ "fdtfile=mpc8349emds.dtb\0" \ "" diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index fe6ec48ca..b072e8447 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -589,7 +589,7 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ @@ -599,7 +599,7 @@ "consoledev=ttyS0\0" \ "ramdiskaddr=1000000\0" \ "ramdiskfile=ramfs.83xx\0" \ - "fdtaddr=400000\0" \ + "fdtaddr=780000\0" \ "fdtfile=mpc836x_mds.dtb\0" \ "" diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index a2a2aadb5..a190a50ed 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -646,7 +646,7 @@ extern int board_pci_host_broken(void); #define CONFIG_BAUDRATE 115200 -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ @@ -656,7 +656,7 @@ extern int board_pci_host_broken(void); "consoledev=ttyS0\0" \ "ramdiskaddr=1000000\0" \ "ramdiskfile=ramfs.83xx\0" \ - "fdtaddr=400000\0" \ + "fdtaddr=780000\0" \ "fdtfile=mpc8379_mds.dtb\0" \ "" diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index ca89b9be4..89fafe7d2 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -668,7 +668,7 @@ #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #define CONFIG_FDTFILE mpc8379_rdb.dtb -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 @@ -684,7 +684,7 @@ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ - "fdtaddr=400000\0" \ + "fdtaddr=780000\0" \ "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ "ramdiskaddr=1000000\0" \ "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0" \ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 4f2aef096..e961bb392 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -630,7 +630,7 @@ #define CONFIG_GATEWAYIP 192.168.1.1 #define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ @@ -657,7 +657,7 @@ "update=protect off ff800000 ff83ffff; " \ "era ff800000 ff83ffff; cp.b 100000 ff800000 ${filesize}\0" \ "upd=run load update\0" \ - "fdtaddr=400000\0" \ + "fdtaddr=780000\0" \ "fdtfile=sbc8349.dtb\0" \ "" diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 35d367da4..5304ec94a 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -554,7 +554,7 @@ #define CONFIG_ROOTPATH /tftpboot/rootfs #define CONFIG_BOOTFILE uImage -#define CONFIG_LOADADDR 500000 /* def location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* def location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* boot command will set bootargs */ @@ -581,7 +581,7 @@ "update=protect off fff00000 fff3ffff; " \ "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \ "upd=run load update\0" \ - "fdtaddr=400000\0" \ + "fdtaddr=780000\0" \ "fdtfile=vme8349.dtb\0" \ "" -- cgit v1.2.3