aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-06-28mx53loco: Add power init supportJason Liu
Increase CPU core power to 1.25v via DA9053 PMIC, and after that CPU can ran to 1GHZ and DDR 400Mhz. Signed-off-by: Jason Liu <jason.hui@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-06-28mx5: Add clock config interfaceJason Liu
Add clock config interface support, so that we can configure CPU or DDR clock in the later init Signed-off-by: Jason Liu <jason.hui@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-06-28omap4: add support for EHCIGilles Chanteperdrix
As board may need some specific support, implement inner functions to be called by the boards implementaions of ehci_hcd_start, ehci_hcd_stop. Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
2011-06-28omap4: add support for gpiosGilles Chanteperdrix
Copied from omap3. Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
2011-06-27Minor coding style fixes.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-06-23Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: run arm_pci_init after relocation IXP42x PCI rewrite update/fix PDNB3 board update/fix IXDP425 / IXDPG425 boards add dvlhost (dLAN 200 AV Wireless G) board IXP NPE: add support for fixed-speed MII ports update/fix AcTux4 board update/fix AcTux3 board update/fix AcTux2 board update/fix AcTux1 board use -ffunction-sections / --gc-sections on IXP42x support CONFIG_SYS_LDSCRIPT on ARM fix "depend" target in npe directory Fix IXP code to work after relocation was added trigger hardware watchdog in IXP42x serial driver add support for IXP42x Rev. B1 and newer add XScale sub architecture (IXP/PXA) to maintainer list Conflicts: arch/arm/lib/board.c Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-06-23run arm_pci_init after relocationMichael Schwingen
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-06-23IXP42x PCI rewriteMichael Schwingen
clean up IXP PCI handling: get rid of IXP-private bus scan, BAR assign etc. code and use u-boot's PCI infrastructure instead. Move board-specific PCI setup code (clock/reset) to board directory. Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-06-23IXP NPE: add support for fixed-speed MII portsMichael Schwingen
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-06-23use -ffunction-sections / --gc-sections on IXP42xMichael Schwingen
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-06-23support CONFIG_SYS_LDSCRIPT on ARMMichael Schwingen
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-06-23fix "depend" target in npe directoryMichael Schwingen
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-06-23Fix IXP code to work after relocation was addedMichael Schwingen
- jump to real flash location after reset before turning off flash mirror - fix timer system to use HZ == 1000, remove broken interrupt-based code Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-06-23add support for IXP42x Rev. B1 and newerMichael Schwingen
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-06-22ARM: drop unsupported 'trab' boardWolfgang Denk
The 'trab' board configuration is broken, and there is nobody who is interested and willing to fix it. Drop it. This includes support for VFD displays which have always been used by this board only. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-06-21include/asm/arch-at91: update several .h files to ATMEL_xxx name schemeEric Benard
Signed-off-by: Eric Bénard <eric@eukrea.com>
2011-06-21arm926ejs/at91/lowlevel_init.S: fix definesEric Benard
atmel rework changed define names which broke this file Signed-off-by: Eric Bénard <eric@eukrea.com>
2011-06-21update arm/at91rm9200 work with rework rework110202Jens Scharsig
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme * Fix: timer.c compile error io.h not found with arm/at91rm9200 * update arm920t/at91 to ATMEL_xxx name scheme * update arm920t/at91 soc lib * update at91_emac driver Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> Tested-by: Andreas Bießmann <andreas.devel@gmail.com>
2011-06-03Blackfin: use on-chip reset func with newer partsMike Frysinger
Turns out the documentation is wrong and doing "RAISE 1" does not result in a software reset, only a core reset. So when the on-chip rom has a functioning reset helper, use it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-03Blackfin: use common LDSCRIPT logicMike Frysinger
Now that common code is a bit smarter when it comes to default LDSCRIPT values, rename the default Blackfin file and drop the Blackfin-specific config.mk logic. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-02Minor coding style cleanupWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-06-01Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: SMDKV310: Fix incorrect conditional compilation for MIU linear mapping SMDKV310: CPU fequency and mmc_pre_ratio modified armv7: Add support for ST-Ericsson U8500 href platform I2C: Add driver for ST-Ericsson U8500 i2c armv7: Add ST-Ericsson u8500 arch Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT ARMV7: Vexpress: Add missing MMC header arm/km: update mgcoge3un board support mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE arm/km: rename mgcoge2un to mgcoge3un arm/km: add second serial interface for kirkwood arm/km: disable ls (through jffs2 support) arm/km: introduce bootcount env variable and clean km_arm arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h ARMV7: MMC SPL Boot support for SMDKV310 board ARMV7: Add support for Samsung SMDKV310 Board S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1) S5P: add set_mmc_clk for external clock control S5PC2XX: Support the cpu revision S5P:SROM config code moved to s5p-common directory Add _end for the end of u-boot image for SMDK6400 MMC S5P: Fix typo S5P: GPIO Macro Values Corrected. SMDK2410: various cleanup/code style fixes SMDK2410: use the CFI driver (and remove the old one) SMDK2410: remove unneeded config.mk SMDK2410: activate ARM relocation feature BeagleBoard: fixed typo in typecast mvsata: issue hard reset on initialization VCMA9: use ARM relocation feature to fix build error MX31: drop warnings due to missing prototype for mxc_watchdog_reset() MX5: drop config.mk from efikamx board MX31: Make get_reset_cause() static and drop unreachable code MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files. MX53: Handle silicon revision 2.1 case mx5: board: code clean up for checkboard code MX51: vision2: Fix build for vision2 board. MX51: vision: Let video mode struct be independant of watchdog. MX53: Add initial support for MX53SMD board. MX53: support for freescale MX53LOCO board mx5: Fix CONFIG_OF_LIBFDT redefined warning mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition mx31pdk: Clean up mx31pdk.h file
2011-06-01armv7: Add ST-Ericsson u8500 archJohn Rigby
Based on ST-Ericsson internal git repo. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> CC: Albert Aribaud <albert.aribaud@free.fr>
2011-05-26S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1)Minkyu Kang
The source of pwm clock is fixed at evt1. And some registers for pwm clock are removed. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26S5P: add set_mmc_clk for external clock controlJaehoon Chung
This patch added set_mmc_clk for external clock control. c210 didn't support host clock control. So We need external_clock_control function for c210. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-05-26S5PC2XX: Support the cpu revisionMinkyu Kang
S5PC210 SoC have two cpu revisions, and have some difference. So, support the cpu revision for each revision. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-05-26S5P:SROM config code moved to s5p-common directoryChander Kashyap
SROM config code is made common for S5P series of boards. smdkc100.c now refers to s5p-common/sromc.c for SROM related subroutines. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26S5P: GPIO Macro Values Corrected.Chander Kashyap
S5PC2XX: Macro values for Pull Up and Driver Strength were wrong. S5PC1XX: Macro values for Driver Strength were wrong. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-23MX31: drop warnings due to missing prototype for mxc_watchdog_reset()Stefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-05-23MX31: Make get_reset_cause() static and drop unreachable codeStefano Babic
get_reset_cause() should not be exported. Drop code in the function after return statement that can generate warnings due to unreachable code. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-23MX53: Handle silicon revision 2.1 caseFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-20powerpc/fsl_pci: Fix device tree fixups for newer platformsKumar Gala
We assumed that only a small set of compatiable strings would be needed to find the PCIe device tree nodes to be fixed up. However on newer platforms the simple rules no longer work. We need to allow specifying the PCIe compatiable string for each individual SoC. We introduce CONFIG_SYS_FSL_PCIE_COMPAT for this purpose and set it if the default isn't sufficient. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19Minor coding style cleanup.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-05-18Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: (40 commits) avr32: add ATAG_BOARDINFO at91: reworked support for otc570 board at91: reworked support for meesc board hammerhead: move CONFIG_SYS_TEXT_BASE to header mimc200: move CONFIG_SYS_TEXT_BASE to header favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header atstk100x: move CONFIG_SYS_TEXT_BASE to header atngw100: move CONFIG_SYS_TEXT_BASE to header mimc200: fix "#define XXXX 1" hammerhead: fix "#define XXXX 1" favr-32-ezkit: fix "#define XXXX 1" atstk1006: fix "#define XXXX 1" atstk1004: fix "#define XXXX 1" atstk1003: fix "#define XXXX 1" atstk1002: fix "#define XXXX 1" atngw100: fix "#define XXXX 1" avr32: use single linker script avr32/config.mk: simplify PLATFORM_RELFLAGS avr32: fix linking Add support for Bluewater Systems Snapper 9260 and 9G20 modules ...
2011-05-18avr32: add ATAG_BOARDINFOAndreas Bießmann
This patch adds a new ATAG_BORADINFO to U-Boot. This tag is intended to hand over the bd->bi_board_number to the linux kernel for early stage board information like a board revision or other kind of board specific decisions necessary before the linux peripherial drivers are up. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18avr32: use single linker scriptAndreas Bießmann
This patch move the atstk100x linker script to $(CPUDIR) and delete other pure copies of this file in each board directory. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18avr32/config.mk: simplify PLATFORM_RELFLAGSAndreas Bießmann
This patch removes PLATFORM_RELFLAGS from board specific config.mk files and define them in arch specific config.mk file. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18avr32: fix linkingAndreas Bießmann
This patch fixes following error: ---8<--- avr32-linux-ld: --gc-sections and -r may not be used together --->8--- Since 8aba9dceebb14144e07d19593111ee3a999c37fc all avr32 boards are broken due to linking error as seen above. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18at91: fixed at91sam9263 system fileDaniel Gorsulowski
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2011-05-18remove __attribute__ ((packed)) in at91 headersJens Scharsig
* remove __attribute__ ((packed)) to prevent byte access to soc registers in some gcc version Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2011-05-18at91rm9200: fix lowlevel_init() SMRDATA sizeJens Scharsig
* use start/end label for initialization tables instead of fix values Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
2011-05-18AT91: fix timer.c - remove reset_timer()Reinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: remove LEGACY from at91_rstc.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: change includes from asm/arch/io.h to asm/io.hReinhard Meyer
and remove the now unused asm/arch-at91/io.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: cleanup at91sam9260_matrix.h to struct SoC accessReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: fix related at91 system/driver filesReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: fix related arch-at91 header filesReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: cleanup hardware.h, remove memory-map.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: rework at91sam9g45.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: rework at91sam9263.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-30 17:16:21 +0000