AgeCommit message (Collapse)Author
2013-07-10pxe: try bootz if bootm fails to find a valid imageHEADmasterRob Herring
Standard pxelinux servers will typically use a zImage rather than u-boot image format, so fallback to bootz if bootm fails. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [tushar.behera@linaro.org: Cherry-picked to current tracking branch] Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-10ARNDALE: Enable option to boot with zImageTushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-03-28Fix html encoding on copy/pasteFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2013-03-27Exynos5: Fix errata 773022 and 774769 on Exynos52502013.02.3Alexander Graf
The exynos5250 chip is affected by the errata 773022 (disable loop buffer) 774769 (refrain streaming-write to ever allocate into the L2 cache) and needs to get the respective fixes as mentioned above applied. This is done in the Samsung downstream kernel within Linux. However, that approach fails to work when we run the guest kernel in HYP mode, as in now Linux's errata fixup code runs without privileges to access the aux control register. So instead, let's patch up u-boot (where CPU errata fixes belong to anyways), so that we can happily run a kernel. This fixes random segmentation faults on Arndale for me, that mostly occured because of the broken loop buffer. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-27vfat: Fix mkcksum argument sizesMarek Vasut
In case a function argument is known/fixed size array in C, the argument is still decoyed as pointer instead ( T f(U n[k]) ~= T fn(U *n) ) and therefore calling sizeof on the function argument will result in the size of the pointer, not the size of the array. The VFAT code contains such a bug, this patch fixes it. Reported-by: Aaron Williams <Aaron.Williams@cavium.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <tom.rini@gmail.com> Cc: Aaron Williams <Aaron.Williams@cavium.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2013-02-07board: samsung: Update MAC address for Arndale board through GUID2013.02.2Tushar Behera
There are a couple of GUID (Global Unique Identifier) registers within EXYNOS5250 SoC. The values of these GUID registers are set as board MAC address. Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-02-05ARNDALE: Enable config to append MAC address to bootargs2013.02.1Tushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-02-05cmd_bootm: Add support to append MAC address to bootargsTushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-02-05EXYNOS5250: ARNDALE: Check booting mode and initialize mmc/emmc accordinglyInderpal Singh
Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
2013-02-05EXYNOS5250: ARNDALE: Read operating mode and invoke copy functions accordinglyInderpal Singh
Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
2013-02-05ARNDALE: CONFIG: define function pointers to copy from emmc to RAMInderpal Singh
It also defines macros for boot configuration. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
2013-02-05DRIVERS: DW_MMC: Correct the fifo_sizeInderpal Singh
fifoth register does not have the fifo_size. For emmc to work, fifo_size should be set 0x80. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
2013-02-05COMMAND: MMC: Extend mmc command to make emmc bootableInderpal Singh
Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
2013-02-05EXYNOS5: ARNDALE: Implement board_late_init to set preboot and eth h/w addressInderpal Singh
preboot is used to start usb so that ethernet device could be found automatically. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
2013-02-04arndale5250: Boot in Hyp mode and enable architected timersChristoffer Dall
First, to boot in Hyp mode we need to change to non-secure mode, which involves configuring the frequency of the arch. timers and setting all interrupts on the gic to group 1 (this code was inspired by the boot wrapper code). Second, signal the secondary CPU while still in secure mode and have the secondary CPU run the SPL. The SPL checks the hardware cpu id, and if it's a secondary CPU, it will initialize non-secure mode inside the SPL, enter Hyp mode, and finally enter a new SMP pen with the same poking stick interface as the regular kernel uses. Third, on CPU0 we wait until u-boot is fully up to actually enter the non-secure mode on CPU0, and stay in non-secure svc mode right up until we actually load the kernel, where the last thing we do is enter Hyp mode. Let it roll... Signed-off-by: Jeremy C. Andrus <jeremya@cs.columbia.edu> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-01-23Fix rebase error introduced in 63cbf0c63b2013.01.1John Rigby
Fixes https://bugs.launchpad.net/u-boot-linaro/+bug/1103004 Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-12-06fix build error with disabled command line editing2012.12.1John Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-12-06ARM: highbank: only boot from specified devicesRob Herring
Only boot from specified device and don't fallback to default boot devices on failure. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06highbank, opp: fix compile error and add transition-latencyMark Langsdorf
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
2012-12-06highbank, opp: copy the opp point dtb table from sysramMark Langsdorf
The ECME puts a copy of the opp table in SysRam. Copy it from SysRam and add it to the dtb. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
2012-12-06serial_pl011: Set RTS during initializationJoshua Housh
If the pl011 is connected to another device which has hardware flow-control on, characters are never received by the pl011. Asserting RTS when flow-control is off will have no effect. Signed-off-by: Joshua Housh <joshua.housh@calxeda.com>
2012-12-06(SW-1803) Support 2+ TB drives on highbankMark Langsdorf
Add CONFIG_SYS_64BIT_LBA to the highbank config. This change, along with the previous 5 commits, enables support for 2+ TB drives. These patches were all cherry-picked from u-boot upstream and should be dropped on the next merge.
2012-12-06cmd_pxe: fix bootargs malloc sizeRob Herring
Need a extra byte for the null termination. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06cmd_pxe: add ipappend supportRob Herring
Add ipappend support to pass network device information to the kernel. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06ARM: highbank: fix sata compatible stringRob Herring
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06cmd_pxe: add support for per arch and SoC default pathsRob Herring
A pxelinux server setup for "default" menu is typically an x86 binary. This does not work well with a mixed architecture setup. Extend the default search to look for default-<arch>-<soc> and then default-<arch> before falling back to just "default". Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06cmd_pxe: make string parameters constRob Herring
Convert a bunch of string parameters to be const. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06ARM: highbank: setup peripherals based on power domain statusRob Herring
Accessing powered down peripherals will hang the bus, so check power domain status before initializing SATA and fixup the FDT to disable unused peripherals. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06ARM: add optional call to ft_board_setupRob Herring
Allow board specific FDT fixups on ARM using the ft_board_setup function. This is enabled using CONFIG_OF_BOARD_SETUP define. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06highbank: remove frequency setting in boot scriptRob Herring
Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
2012-12-06ARM: highbank: enable reset on command timeoutRob Herring
Enable resetting when no command is entered within 60 seconds. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06common: main: rework cmd timeout handlingRob Herring
The readline_from_buffer timeout functionality is broken in multiple ways. If CONFIG_CMDLINE_EDITING is not enabled, the timeout value was never used. If CONFIG_BOOT_RETRY_TIME is enabled, then that time is always used and the specified timeout has no effect. The same (or what should be the same) timeout code is duplicated in multiple places. The new behavior is this: The user specified timeout passed to readline_from_buffer is the timeout to get the 1st character. After that the endtime value is used if enabled. For example, if 20 seconds is passed in and the retry_time is 60 seconds, the user has 20 seconds to enter the first character and 60 seconds to complete the input. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06ARM: highbank: fix get_tbclk value to timer rateRob Herring
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06ahci: set udma mode to 5 to fix some 1.5Gbps drivesRob Herring
Some SATA 1.5G drives don't work with UDMA mode 6, so use mode 5 instead. As this is SATA, the UDMA mode doesn't really matter. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06net: calxedaxgmac: disable pause frame transmitRob Herring
The xgmac receiver will only have buffer if we are doing a network command, so we want to just drop frames rather than send pause frames. Also, enable rx cut-thru for better performance. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06ARM: highbank: use hardcoded wfi instr for old compilersRob Herring
Older compilers don't recognize v7 wfi instruction, so just hard-code the machine code and revert compiling with armv7. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06ARM: highbank: set timer prescaler to 256Rob Herring
The 150MHz clock rate gives u-boot time functions problems and there's no benefit to a fast clock, so lower the rate. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06ARM: highbank: add missing SCU register setup for resetRob Herring
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06pxe: add support for ontimeout tokenRob Herring
ontimeout is similar to default, but is the selection on menu timeout. This is how cobbler sets a default. The label default is supposed to be the default selection when <enter> is pressed. If both default and ontimeout are set, last one parsed wins. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06pxe: fix default label handlingRob Herring
Changing to numeric entries broke the default label. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06pxe: simplify menu display and selectionRob Herring
Menus with lots of entries and long append lines are hard to read. Just show a numbered list using the label or name and make the choice by entering the number. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06pxe: localboot fixesRob Herring
Add support for value of -1 For localboot. A value of -1 means return to u-boot prompt. localboot value is often 0, so we need to distinguish the value from localboot being selected. A value of greater than or equal to 0 means attempt local boot command. If localboot is selected, we don't want to try other entries. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06pxe: always display a menu when presentRob Herring
The prompt flag is for displaying a "boot:" prompt in pxelinux. This doesn't make sense for u-boot as we don't support the pxelinux command interface. So we should just ignore prompt statements and always show the menu if a menu is present. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06pxe: use bootz instead of bootmRob Herring
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06bootz: un-staticize do_bootzRob Herring
bootz is needed for sysboot command. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06ARM: highbank: update config optionsRob Herring
enable EFI partitions and FAT filesystem enable bootz command and raw initrd increase cmd and print buffer size to 1K change serial baudrate to 115200 enable hush shell Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06ARM: highbank: add autoboot script fileRob Herring
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-06EXYNOS: mmc: work around rebase build errorJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-12-06Added support for DHCP, PXE for Arndale boardShivamurthy Shastri
2012-12-06Enable the signal for PSHOLD portYuvaraj CD