AgeCommit message (Collapse)Author
2010-10-14Blackfin: update anomaly lists to latest sheetsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-13env_mmc: fix cannot save env issueLei Wen
The env change its implementation after this log, while env mmc didn't change it immediately, which cause issue. Follow to the new style to fix it. commit ea882baf9c17cd142c99e3ff640d3ab01daa5cec Author: Wolfgang Denk <wd@denx.de> Date: Sun Jun 20 23:33:59 2010 +0200 New implementation for internal handling of environment variables. Signed-off-by: Lei Wen <leiwen@marvell.com>
2010-10-13ns16550: Add WATCHDOG_RESET to putc for short watchdog timeout boardsStefan Roese
Call watchdog_reset() upon newline. This is done here in putc since the environment code uses a single puts() to print the complete envrironment upon "printenv". So we can't put this watchdog call in puts(). This is needed for boards with a very short watchdog timeout, like the lwmon5 with a 100ms timeout. Without this patch this board resets in the commands with long outputs, like "printenv" or "fdt print". Note that the image size is not increased with this patch when CONFIG_HW_WATCHDOG or CONFIG_WATCHDOG are not defined since the compiler optimizes this additional code away. Signed-off-by: Stefan Roese <sr@denx.de> Fix typo in comment. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-13ppc: Conditionally compile bat_rw.cPeter Tyser
Only a few PPC boards actually use the common BAT manipulation functions, so only compile it for them. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-13Fix define for MPC5121 ADS board.mark.vels@team-embedded.nl
Originally the Makefile defines CONFIG_ADS5121_REV2 when configuring for board mpc5121ads_rev2. The config in include/configs/mpc5121ads.h expects a define CONFIG_MPC5121ADS_REV2 for this. Therefore there are two defines used but only 1 is defined. This patch renames references to CONFIG_ADS5121_REV2 to CONFIG_MPC5121ADS_REV2 to have one common define. This patch fixes faulty mem size detection caused by wrong config in include/configs/mpc5121ads.h Signed-off-by: Mark Vels <mark.vels@team-embedded.nl>
2010-10-13Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2010-10-13Merge branch 'sf' of git://git.denx.de/u-boot-blackfinWolfgang Denk
2010-10-13Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk
2010-10-13common/fdt_support.c: fix compile errorMatthew McClintock
Fix build error introduced in beca5a5f5bf0d88125580e5e9c1730469cd50ab8 common/libcommon.a(fdt_support.o): In function `fdt_add_edid': /local/hudson/jobs/mirrors-u-boot.git/workspace/common/fdt_support.c:1205: undefined reference to `fdt_increase_size' make: *** [u-boot] Error 1 Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-10-13usb: musb: only write CLRDATATOG when appropriateBryan Wu
This is a change similar to what is already in the Linux driver. We should only program the CLRDATATOG bit when the current mode indicates that it is needed. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-13usb: Add support for multiple-LUN mass storage devicesLudovic Courtès
This patch changes `usb_stor_scan' to scan all the LUNs of each mass storage device. It also fixes the various commands to correctly set the LUN field. Notably, it allows each LUN of GuruPlug's microSD card reader to be accessed. Signed-off-by: Ludovic Courtès <ludo@gnu.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-10-13USB-CDC: Prevent rx_req being enqueued twiceVitaly Kuzmichev
After gadget reinitializaton (after tftp has been done once) packet_received may become equal to 1 due to nuking OUT_EP while disabling it in eth_reset_config. rx_submit called from usb_eth_init queues rx_req first time. But the first call of usb_eth_recv from NetLoop queues rx_req again due to packet_received = 1. The following flow shows the path of functions calls when this happens: net/net.c:NetLoop | +-net/eth.c:eth_init | ether.c:usb_eth_init | | | +-udc_driver:usb_gadget_handle_interrupts | | udc_driver:... | | ether.c:eth_setup | | ether.c:eth_set_config | | ether.c:eth_reset_config | | udc_driver:usb_ep_disable | | udc_driver:nuke | | ether.c:rx_complete | | ether.c: packet_received = 1; | | | +-ether.c:rx_submit | udc_driver:usb_ep_queue --- The first time when rx_req is queued | +-net/eth.c:eth_rx ether.c:usb_eth_recv | +-udc_driver:usb_gadget_handle_interrupts | udc_driver:... --- no interrupts, returning +-ether.c: if (packet_received) { ... ether.c:rx_submit udc_driver:usb_ep_queue --- The second time! Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
2010-10-13USB-CDC: Fix tx/rx_req memory leaksVitaly Kuzmichev
Remove and fix needless and destructive operations with tx/rx_req. 1) 'req' in rx_complete is always not NULL and always equals to rx_req 2) Free allocated tx_req if rx_req allocation has failed 3) Do not zero out tx/rx_req in usb_eth_init, leave this for eth_reset_config which will be called at the next use of usb0 4) Additional check in usb_eth_recv is not required Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
2010-10-13USB: Make non-bulk delay longer in OHCIMarek Vasut
This fixes TIMEOUT with my Kingston 32GB USB3.0 flashdrive, which I experienced on my PXA270 (USB 1.1) Vpac270 board. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-13board/armltd/integrator/split_by_variant.sh: fix 'echo -n'Andreas Bießmann
This patch fixes an error when running MAKEALL for ARM9. On OS X /bin/sh uses builtin echo which does not utilise '-n' switch. GNU manual for builtins recomend to use here-document style to solve this portability issue. This patch removes the usage of 'echo -n' and replace by here-document style or a oneline echo command. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> CC: Peter Pearse <peter.pearse@arm.com>
2010-10-13ARMV7: Fixed baudrate setting in pl01x driverMatt Waddel
The pl01x serial driver was lacking the code to switch baudrates from the command line. Fixed by simply saving the new baudrate and calling serial_init() again. Also fixed CamelCase variables, I/O accessors and comment style. Signed-off-by: Matt Waddel <matt.waddel@linaro.org>
2010-10-13ARMV7: Versatile Express Coretile CortexA9x4 supportMatt Waddel
Adds support for the ARM quad-core Cortex-A9 processor This system includes a motherboard(Versatile Express), daughterboard (Coretile), and SOC(Cortex-A9 quad core). The serial port, ethernet, and flash systems work with these additions. The naming convention is: SOC -> CortexA9 quad core = ca9x4 daughterboard -> Coretile = ct motherboard -> Versatile Express = vxp This gives ca9x4_ct_vxp.c as the board support file. Signed-off-by: Matt Waddel <matt.waddel@linaro.org>
2010-10-13arch/arm/include/asm/sizes.h: cleanupsAndreas Bießmann
Merge several sizes.h in asm/arch subdirectories into a single asm/sizes.h file. Fixup usage of asm/arch/sizes.h in some files to use the merged file. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2010-10-13Merge branch 'master' of git://git.denx.de/u-boot-marvellWolfgang Denk
2010-10-13ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOCBen Gardiner
There were some #undef's of CONFIG_SYS_ARM_WITHOUT_RELOC added to a few board configs as part of the arm relocation series; but these are not needed now as we do not #undef what is not #defined in the first place. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> CC: Heiko Schocher <hs@denx.de>
2010-10-13ARM: relocation: fix typo in commentHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2010-10-13Kirkwood: Changes specific to ARM relocation supportPrafulla Wadaskar
All Kirkwood based boards are supported for this new implementation ref: docs/README.arm-relocation Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-10-13kirkwood: added common config file mv-common.hPrafulla Wadaskar
It is observed that, in most of the board configs the code is being duplicated, also for any common change all board files needs update This issue was under discussion from long on mailing list and we converge on introducing common config file. With this patch- 1. Total Kirkwood specific configuration code is reduced by 210 lines 2. All common configuration can be shared by multiple boards 3. Easy to manage common updates like ARM relocation changes mv-common.h file is added to include/configs/ It contains all common configuration supported for all Kirkwood boards The respective board configs are updated for its usage Build tested for guruplug, mv88f6281gtw_ge, openrd_base, rd6281a and sheevaplug Binary execution tested for sheevaplug Todo: 1. Other custom Kirkwood boards to be synced 2. The support to be extended for Orion5X based boards Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-10-13Kirkwood: dram_init is moved to dram.cPrafulla Wadaskar
For all Kirkwood boards so far dram_init function is duplicated dram_init function is moved to dram.c and relevant code from all board specific files removed If any board needs specific dram init handling than standard one, then, a macro CONFIG_SYS_BOARD_DRAM_INIT should be defined in board config header file and the dram_init function can be put in board specific source file For ex. keymile boards Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-10-13orion5x: optimize window size computationAlbert Aribaud
Signed-off-by: Chris Moore <moore@free.fr> Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-10-13Kirkwood: print_cpuinfo fixed for valid devid revidPrafulla Wadaskar
Earlier Device Identification register was used to detect the type for SoC, considering 88F6282 support to be added, It is not possible to detect the same using current algorithm. With this patch, device ID is being read using PCIE devid register, also valid chip revision ID will also be read and displayed Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-10-13mvsata_ide: adjust port init sequenceAlbert Aribaud
mvsata_ide_initialize_port(): adjust init sequence (SStatus should be checked only after all writes to SControl) and return success/failure to ide_preinit(). Also, as some tests showed init durations in the hundreds of us, raise the time-out to 01 ms to be on the safe side. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-10-12sf: turn probe switch into a lookup tableReinhard Meyer
This allows for arbitrarily long manufacturer ids following the JEDEC standard of 0x7f continuation bytes. It also makes adding new entries easier as it's just one element in an array. The downside is that it increases code size a bit, but we're talking ~50 bytes. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-12TSI148: Fix argument parsingBrent Darley
This patch does 2 things: - Fix the argument number assigned to the vdw (VME data width) value. Previously, a nonexistent 7th arument was read as the vdw variable. - Reduce the size of the argument array for the tsi148 command from 8 to 7. The tsi148 command itself is argument index 0, and the maximum number arguments passed to the command is 6, making a total of 7 for the array. Signed-off-by: Brent Darley <bdarley@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-12powerpc: Remove warm reset entry pointPeter Tyser
No boards utilize the warm reset entry point, so remove it. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-12ppmc7xx: Use _start as reset entry pointPeter Tyser
Previously the _warm_start label was used as an entry point. These 2 entry points should be functionally identical after the removal of the BOOTFLAG_WARM define. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-12powerpc: Zero out board info struct on bootupPeter Tyser
This puts the board info struct in a known state and allows the removal of other code which initialized board info fields to 0. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-12cp/cmp: Add WATCHDOG_RESET in copy and compare loopStefan Roese
On some boards with a very short watchdog timeout, the "cp" and "cmp" commands may reset the board. This patch adds some watchdog resets inside the loops. Otherwise for example the lwmon5 board will reset while doing something like this: => cp.b fc000000 1000000 100000 Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-12examples/standalone: Use gcc's -fno-toplevel-reorderPeter Tyser
Using -fno-toplevel-reorder causes gcc to not reorder functions. This ensures that an application's entry point will be the first function in the application's source file. This change, along with commit 620bbba524fbaa26971a5004793010b169824f1b should cause a standalone application's entry point to be at the base of the compiled binary. Previously, the entry point could change depending on gcc version and flags. Note -fno-toplevel-reorder is only available in gcc version 4.2 or greater. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-12a4m072: support for SHOW_BOOT_PROGRESS feature using LED displayIlya Yanok
This patch adds support for displaying boot progress codes on a4m072 board using LED display. As we can display only one symbol at any time on the hardware (two symbols with blinking) we can't display progress codes directly and have to map them to 2-symbol codes. We use the following mapping on the a4m972 board: [1, 8] U [100, 108] -> 5 [-9, -1] U [-101, -100] U [-113, -103] -> -5 [9, 14] U [120, 123] U [125, 129] -> 8 [-13, -10] U [-122, -120] U [-127, -124] U {-129} -> -8 {15} -> 9 [-32, -30] -> -A [-40, -35] U [-51, -42] U [-58, -53] U [-83, -80] U {-64, -130, -140, -150} -> -B Other progress code are ignored. One symbol codes are displayed steady while two-symbol codes are displayed using blinking. Boot progress codes are displayed with decimal got unset (as opposed to 'display' command output). Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2010-10-12a4m072: led display supportIlya Yanok
This patch adds support for LED display on a4m072 board. Hardware is capable of displaying only one symbol at any time. We support displaying two symbols in software (via blinking). Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2010-10-12led_display: split led display support into generic and hw-dependent partsIlya Yanok
Split the display command into generic interface and hardware-specific realization for PDSP188x LED display found on hmi1001 and manroland boards. Simple interface for LED displays is defined in include/led-display.h and described in doc/README.LED_display. Driver-specific implementation was moved into drivers/misc/pdsp188x.c file (enabled with CONFIG_PDSP188x set). Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2010-10-12A4M072: Added support for the board.Sergei Poselenov
This patch provides support for the A4M072 board with the following features: UART NOR flash FEC Ethernet External SRAM I2C EEPROM CompactFlash cards on IDE/ATA port USB Host PCI initialization The 7-segment LED indicator is not yet supported. Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2010-10-12VFAT: fix processing of scattered long file name entriesMikhail Zolotaryov
The U-Boot code has the following bugs related to the processing of Long File Name (LFN) entries scattered across several clusters/sectors : 1) get_vfatname() function is designed to gather scattered LFN entries by cluster chain processing - that doesn't work for FAT12/16 root directory. In other words, the function expects the following input data: 1.1) FAT32 directory (which is cluster chain based); OR 1.2) FAT12/16 non-root directory (which is also cluster chain based); OR 1.3) FAT12/16 root directory (allocated as contiguous sectors area), but all necessary information MUST be within the input buffer of filesystem cluster size (thus cluster-chain jump is never initiated). In order to accomplish the last condition, root directory parsing code in do_fat_read() uses the following trick: read-out cluster-size block, process only first sector (512 bytes), then shift 512 forward, read-out cluster-size block and so on. This works great unless cluster size is equal to 512 bytes (in a case you have a small partition), or long file name entries are scattered across three sectors, see 4) for details. 2) Despite of the fact that get_vfatname() supports FAT32 root directory browsing, do_fat_read() function doesn't send current cluster number correctly, so root directory look-up doesn't work correctly. 3) get_vfatname() doesn't gather scattered entries correctly also is the case when all LFN entries are located at the end of the source cluster, but real directory entry (which must be returned) is at the only beginning of the next one. No error detected, the resulting directory entry returned contains a semi-random information (wrong size, wrong start cluster number and so on) i.e. the entry is not accessible. 4) LFN (VFAT) allows up to 20 entries (slots) each containing 26 bytes (13 UTF-16 code units) to represent a single long file name i.e. up to 520 bytes. U-Boot allocates 256 bytes buffer instead, i.e. 10 or more LFN slots record may cause buffer overflow / memory corruption. Also, it's worth to mention that 20+1 slots occupy 672 bytes space which may take more than one cluster of 512 bytes (medium-size FAT32 or small FAT16 partition) - get_vfatname() function doesn't support such case as well. The patch attached fixes these problems in the following way: - keep using 256 bytes buffer for a long file name, but safely prevent a possible buffer overflow (skip LFN processing, if it contains 10 or more slots). - explicitly specify FAT12/16 root directory parsing buffer size, instead of relying on cluster size. The value used is a double sector size (to store current sector and the next one). This fixes the first problem and increases performance on big FAT12/16 partitions; - send current cluster number (FAT32) to get_vfatname() during root directory processing; - use LFN counter to seek the real directory entry in get_vfatname() - fixes the third problem; - skip deleted entries in the root directory (to prevent bogus buffer overflow detection and LFN counter steps). Note: it's not advised to split up the patch, because a separate part may operate incorrectly. Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
2010-10-12tools/imls: fix comment in MakefileDaniel Hobi
Commit d984fed0 (makefiles: fixes for building build tools) changed the variable name FIT_CFLAGS to HOSTCFLAGS_NOPED but forgot to update to corresponding comment. Signed-off-by: Daniel Hobi <daniel.hobi@schmid-telecom.ch> Cc: Scott Wood <scottwood@freescale.com> Cc: Wolfgang Denk <wd@denx.de>
2010-10-12env: don't set to default env twice when use CONFIG_ENV_IS_NOWHERELei Wen
When use the CONFIG_ENV_IS_NOWHERE, I met such issue: DRAM: 256 MiB Using default environment *** Warning - bad CRC, using default environment Signed-off-by: Lei Wen <leiwen@marvell.com>
2010-10-12zlib: Add further watchdog reset callsStefan Roese
Patch 253cb831 [zlib: add watchdog reset call] added already a few watchdog reset calls to the new zlib U-Boot port. But on some boards this is not enough. Additional calls are needed on boards with short watchdog timeouts. This was detected and tested on the lwmon5 board with a very short watchdog timeout. Without this patch, the board resets during Linux kernel decompression. With it, the decompression succeeds. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Detlev Zundel <dzu@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2010-10-12zlib/gunzip: Use WATCHDOG_RESET macroStefan Roese
As usually done in U-Boot, the watchdog_reset code is called via a macro (WATCHDOG_RESET). In zlib.c this was done differently, by using a function pointer which is initialized with WATCHDOG_RESET upon watchdog usage or with NULL otherwise. This patch now uses the plain WATCHDOG_RESET macros to call the function resulting in slightly smaller U-Boot images and simpler code. U-Boot code size reduction: PowerPC board with watchdog support (lwmon5): -> 80 bytes smaller image size PowerPC board without watchdog support (sequoia): -> 112 bytes smaller image size Signed-off-by: Stefan Roese <sr@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2010-10-12pdm360ng: add EDID property to FDT display nodeAnatolij Gustschin
PDM360NG board uses this functionality to pass display timing info to the Linux Framebuffer driver. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2010-10-12fdt_support: support adding EDID property to FDT display nodesAnatolij Gustschin
Boards can pass display timing info for drivers using EDID block. Provide common function to add board specific EDID data to the device tree. Subsequent patch makes use of this functionality. Detailed timing descriptor data from EDID is used for programming the display controller. This is currently implemented on the Linux side by the fsl-diu-fb frame buffer driver and it is documented there in Documentation/powerpc/dts-bindings/fsl/diu.txt. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Cc: Gerald Van Baren <vanbaren@cideas.com>
2010-10-12CONFIG_CMD_JFFS2 is not necessary to use mtdparts on erase & protect on/offAlexander Stein
The include <jffs2/jffs2.h> is still necessary though. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Stefan Roese <sr@denx.de>
2010-10-12Merge branch 'master' of git://git.denx.de/u-boot-cfi-flashWolfgang Denk
2010-10-12Merge branch 'master' of git://git.denx.de/u-boot-microblazeWolfgang Denk
2010-10-12Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2010-10-12Kirkwood: Changes specific to ARM relocation supportPrafulla Wadaskar
All Kirkwood based boards are supported for this new implementation ref: docs/README.arm-relocation Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>