diff options
Diffstat (limited to 'board/LaCie/wireless_space/wireless_space.c')
| -rw-r--r-- | board/LaCie/wireless_space/wireless_space.c | 176 |
1 files changed, 176 insertions, 0 deletions
diff --git a/board/LaCie/wireless_space/wireless_space.c b/board/LaCie/wireless_space/wireless_space.c new file mode 100644 index 000000000..208065899 --- /dev/null +++ b/board/LaCie/wireless_space/wireless_space.c @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> + * + * Based on Kirkwood support: + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <command.h> +#include <asm/arch/cpu.h> +#include <asm/arch/kirkwood.h> +#include <asm/arch/mpp.h> +#include <asm/arch/gpio.h> + +#include "../common/common.h" +#include "netdev.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* GPIO configuration: start FAN at low speed, USB and HDD */ + +#define WIRELESS_SPACE_OE_LOW 0xFF006808 +#define WIRELESS_SPACE_OE_HIGH 0x0000F989 +#define WIRELESS_SPACE_OE_VAL_LOW 0x00010080 +#define WIRELESS_SPACE_OE_VAL_HIGH 0x00000240 + +#define WIRELESS_SPACE_REAR_BUTTON 13 +#define WIRELESS_SPACE_FRONT_BUTTON 43 + +const u32 kwmpp_config[] = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Fan speed (bit 1) */ + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_GPIO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP15_SATA0_ACTn, + MPP16_GPIO, /* SATA 0 power */ + MPP17_GPIO, /* SATA 1 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GE1_0, /* Gigabit Ethernet 1 */ + MPP21_GE1_1, + MPP22_GE1_2, + MPP23_GE1_3, + MPP24_GE1_4, + MPP25_GE1_5, + MPP26_GE1_6, + MPP27_GE1_7, + MPP28_GE1_8, + MPP29_GE1_9, + MPP30_GE1_10, + MPP31_GE1_11, + MPP32_GE1_12, + MPP33_GE1_13, + MPP34_GE1_14, + MPP35_GE1_15, + MPP36_GPIO, /* Fan speed (bit 2) */ + MPP37_GPIO, /* Fan speed (bit 0) */ + MPP38_GPIO, /* Fan power */ + MPP39_GPIO, /* Fan rotation fail */ + MPP40_GPIO, /* Ethernet switch link */ + MPP41_GPIO, /* USB enable host vbus */ + MPP42_GPIO, /* LED clock control */ + MPP43_GPIO, /* WPS button (0=Pushed, 1=Released) */ + MPP44_GPIO, /* Red LED on/off */ + MPP45_GPIO, /* Red LED timer blink (on=off=100ms) */ + MPP46_GPIO, /* Green LED on/off */ + MPP47_GPIO, /* LED (blue, green) SATA activity blink */ + MPP48_GPIO, /* Blue LED on/off */ + 0 +}; + +struct mv88e61xx_config swcfg = { + .name = "egiga0", + .vlancfg = MV88E61XX_VLANCFG_ROUTER, + .rgmii_delay = MV88E61XX_RGMII_DELAY_EN, + .led_init = MV88E61XX_LED_INIT_EN, + .mdip = MV88E61XX_MDIP_NOCHANGE, + .portstate = MV88E61XX_PORTSTT_FORWARDING, + .cpuport = 0x20, + .ports_enabled = 0x3F, +}; + +int board_early_init_f(void) +{ + /* Gpio configuration */ + kw_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH, + WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + kirkwood_mpp_conf(kwmpp_config, NULL); + + return 0; +} + +int board_init(void) +{ + /* Machine number */ + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; + + /* Boot parameters address */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + + return 0; +} + +#if defined(CONFIG_MISC_INIT_R) +int misc_init_r(void) +{ +#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) + if (!getenv("ethaddr")) { + uchar mac[6]; + if (lacie_read_mac_address(mac) == 0) + eth_setenv_enetaddr("ethaddr", mac); + } +#endif + return 0; +} +#endif + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) +/* Configure and initialize PHY */ +void reset_phy(void) +{ + /* configure switch on egiga0 */ + mv88e61xx_switch_initialize(&swcfg); +} +#endif + +#if defined(CONFIG_KIRKWOOD_GPIO) && defined(CONFIG_WIRELESS_SPACE_CMD) +/* Return GPIO button status */ +static int +do_ws(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if (strcmp(argv[1], "button") == 0) { + if (strcmp(argv[2], "rear") == 0) + /* invert GPIO result for intuitive while/until use */ + return !kw_gpio_get_value(WIRELESS_SPACE_REAR_BUTTON); + else if (strcmp(argv[2], "front") == 0) + return kw_gpio_get_value(WIRELESS_SPACE_FRONT_BUTTON); + else + return -1; + } else { + return -1; + } +} + +U_BOOT_CMD(ws, 3, 0, do_ws, + "Return GPIO button status 0=off 1=on", + "- ws button rear|front: test buttons' states\n" +); +#endif |