diff options
Diffstat (limited to 'arch/powerpc/include/asm')
| -rw-r--r-- | arch/powerpc/include/asm/config.h | 7 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/config_mpc85xx.h | 21 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_liodn.h | 13 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_pci.h | 4 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_portals.h | 3 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_serdes.h | 7 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/immap_85xx.h | 89 |
7 files changed, 142 insertions, 2 deletions
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index 624d8c2cc..9aad9be1b 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -29,6 +29,13 @@ #include <asm/config_mpc86xx.h> #endif +/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */ +#if defined(CONFIG_MPC8XXX_SPI) || defined(CONFIG_FSL_ESPI) +# ifndef CONFIG_HARD_SPI +# define CONFIG_HARD_SPI +# endif +#endif + #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH #define CONFIG_SYS_BOOT_GET_CMDLINE diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 41fd86c4e..41c2d20df 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -264,6 +264,10 @@ #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 32 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_PPC_P3041) #define CONFIG_MAX_CPUS 4 @@ -275,6 +279,10 @@ #define CONFIG_SYS_NUM_FM1_10GEC 1 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 32 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_PPC_P4040) #define CONFIG_MAX_CPUS 4 @@ -282,6 +290,7 @@ #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 #elif defined(CONFIG_PPC_P4080) #define CONFIG_MAX_CPUS 8 @@ -295,6 +304,7 @@ #define CONFIG_SYS_NUM_FM2_10GEC 1 #define CONFIG_NUM_DDR_CONTROLLERS 2 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_ERRATUM_CPC_A002 #define CONFIG_SYS_FSL_ERRATUM_CPC_A003 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003 @@ -304,6 +314,9 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC136 #define CONFIG_SYS_P4080_ERRATUM_CPU22 #define CONFIG_SYS_P4080_ERRATUM_SERDES8 +#define CONFIG_SYS_P4080_ERRATUM_SERDES9 +#define CONFIG_SYS_P4080_ERRATUM_SERDES_A001 +#define CONFIG_SYS_P4080_ERRATUM_SERDES_A005 /* P5010 is single core version of P5020 */ #elif defined(CONFIG_PPC_P5010) @@ -316,6 +329,10 @@ #define CONFIG_SYS_NUM_FM1_10GEC 1 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 32 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_PPC_P5020) #define CONFIG_MAX_CPUS 2 @@ -327,6 +344,10 @@ #define CONFIG_SYS_NUM_FM1_10GEC 1 #define CONFIG_NUM_DDR_CONTROLLERS 2 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 32 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #else #error Processor type not defined for this platform diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index 0ec5c0a3f..801571f9e 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -115,10 +115,18 @@ extern void fdt_fixup_liodn(void *blob); FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \ CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET) \ +/* + * handle both old and new versioned SEC properties: + * "fsl,secX.Y" became "fsl,sec-vX.Y" during development + */ #define SET_SEC_JR_LIODN_ENTRY(jrNum, liodnA, liodnB) \ SET_LIODN_ENTRY_2("fsl,sec4.0-job-ring", liodnA, liodnB,\ offsetof(ccsr_sec_t, jrliodnr[jrNum].ls) + \ CONFIG_SYS_FSL_SEC_OFFSET, \ + CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrNum), \ + SET_LIODN_ENTRY_2("fsl,sec-v4.0-job-ring", liodnA, liodnB,\ + offsetof(ccsr_sec_t, jrliodnr[jrNum].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, \ CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrNum) /* This is a bit evil since we treat rtic param as both a string & hex value */ @@ -127,6 +135,11 @@ extern void fdt_fixup_liodn(void *blob); liodnA, \ offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \ CONFIG_SYS_FSL_SEC_OFFSET, \ + CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)), \ + SET_LIODN_ENTRY_1("fsl,sec-v4.0-rtic-memory", \ + liodnA, \ + offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, \ CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)) #define SET_SEC_DECO_LIODN_ENTRY(num, liodnA, liodnB) \ diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index 82d75bef6..fc47a9f7e 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -230,7 +230,9 @@ int fsl_pcie_init_board(int busno); #define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 3) #define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 4) -#if defined(CONFIG_FSL_CORENET) +#if !defined(CONFIG_PCI) +#define FT_FSL_PCI_SETUP +#elif defined(CONFIG_FSL_CORENET) #define FSL_PCIE_COMPAT "fsl,p4080-pcie" #define FT_FSL_PCI_SETUP \ FT_FSL_PCIE1_SETUP; \ diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h index cb32927a8..e1c1212c3 100644 --- a/arch/powerpc/include/asm/fsl_portals.h +++ b/arch/powerpc/include/asm/fsl_portals.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -51,6 +51,7 @@ extern int get_dpaa_liodn(enum fsl_dpaa_dev dpaa_dev, u32 *liodns, int liodn_offset); extern void setup_portals(void); extern void fdt_fixup_qportals(void *blob); +extern void fdt_fixup_bportals(void *blob); extern struct qportal_info qp_info[]; extern void fdt_portal(void *blob, const char *compat, const char *container, diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 85518eb6e..0f31af1db 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -53,4 +53,11 @@ enum srds_prtcl { int is_serdes_configured(enum srds_prtcl device); void fsl_serdes_init(void); +#ifdef CONFIG_FSL_CORENET +int serdes_get_first_lane(enum srds_prtcl device); +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 +void serdes_reset_rx(enum srds_prtcl device); +#endif +#endif + #endif /* __FSL_SERDES_H */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index b51017b55..f85cee270 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1920,9 +1920,56 @@ typedef struct ccsr_gur { u32 gpindr; /* General-purpose input data */ u8 res5[12]; u32 pmuxcr; /* Alt. function signal multiplex control */ +#if defined(CONFIG_P1010) || defined(CONFIG_P1014) +#define MPC85xx_PMUXCR_TSEC1_0_1588 0x40000000 +#define MPC85xx_PMUXCR_TSEC1_0_RES 0xC0000000 +#define MPC85xx_PMUXCR_TSEC1_1_1588_TRIG 0x10000000 +#define MPC85xx_PMUXCR_TSEC1_1_GPIO_12 0x20000000 +#define MPC85xx_PMUXCR_TSEC1_1_RES 0x30000000 +#define MPC85xx_PMUXCR_TSEC1_2_DMA 0x04000000 +#define MPC85xx_PMUXCR_TSEC1_2_GPIO 0x08000000 +#define MPC85xx_PMUXCR_TSEC1_2_RES 0x0C000000 +#define MPC85xx_PMUXCR_TSEC1_3_RES 0x01000000 +#define MPC85xx_PMUXCR_TSEC1_3_GPIO_15 0x02000000 +#define MPC85xx_PMUXCR_IFC_ADDR16_SDHC 0x00400000 +#define MPC85xx_PMUXCR_IFC_ADDR16_USB 0x00800000 +#define MPC85xx_PMUXCR_IFC_ADDR16_IFC_CS2 0x00C00000 +#define MPC85xx_PMUXCR_IFC_ADDR17_18_SDHC 0x00100000 +#define MPC85xx_PMUXCR_IFC_ADDR17_18_USB 0x00200000 +#define MPC85xx_PMUXCR_IFC_ADDR17_18_DMA 0x00300000 +#define MPC85xx_PMUXCR_IFC_ADDR19_SDHC_DATA 0x00040000 +#define MPC85xx_PMUXCR_IFC_ADDR19_USB 0x00080000 +#define MPC85xx_PMUXCR_IFC_ADDR19_DMA 0x000C0000 +#define MPC85xx_PMUXCR_IFC_ADDR20_21_SDHC_DATA 0x00010000 +#define MPC85xx_PMUXCR_IFC_ADDR20_21_USB 0x00020000 +#define MPC85xx_PMUXCR_IFC_ADDR20_21_RES 0x00030000 +#define MPC85xx_PMUXCR_IFC_ADDR22_SDHC 0x00004000 +#define MPC85xx_PMUXCR_IFC_ADDR22_USB 0x00008000 +#define MPC85xx_PMUXCR_IFC_ADDR22_RES 0x0000C000 +#define MPC85xx_PMUXCR_IFC_ADDR23_SDHC 0x00001000 +#define MPC85xx_PMUXCR_IFC_ADDR23_USB 0x00002000 +#define MPC85xx_PMUXCR_IFC_ADDR23_RES 0x00003000 +#define MPC85xx_PMUXCR_IFC_ADDR24_SDHC 0x00000400 +#define MPC85xx_PMUXCR_IFC_ADDR24_USB 0x00000800 +#define MPC85xx_PMUXCR_IFC_ADDR24_RES 0x00000C00 +#define MPC85xx_PMUXCR_IFC_PAR_PERR_RES 0x00000300 +#define MPC85xx_PMUXCR_IFC_PAR_PERR_USB 0x00000200 +#define MPC85xx_PMUXCR_LCLK_RES 0x00000040 +#define MPC85xx_PMUXCR_LCLK_USB 0x00000080 +#define MPC85xx_PMUXCR_LCLK_IFC_CS3 0x000000C0 +#define MPC85xx_PMUXCR_SPI_RES 0x00000030 +#define MPC85xx_PMUXCR_SPI_GPIO 0x00000020 +#define MPC85xx_PMUXCR_CAN1_UART 0x00000004 +#define MPC85xx_PMUXCR_CAN1_TDM 0x00000008 +#define MPC85xx_PMUXCR_CAN1_RES 0x0000000C +#define MPC85xx_PMUXCR_CAN2_UART 0x00000001 +#define MPC85xx_PMUXCR_CAN2_TDM 0x00000002 +#define MPC85xx_PMUXCR_CAN2_RES 0x00000003 +#endif #define MPC85xx_PMUXCR_SD_DATA 0x80000000 #define MPC85xx_PMUXCR_SDHC_CD 0x40000000 #define MPC85xx_PMUXCR_SDHC_WP 0x20000000 +#define MPC85xx_PMUXCR_ELBC_OFF_USB2_ON 0x01000000 #define MPC85xx_PMUXCR_TDM_ENA 0x00800000 #define MPC85xx_PMUXCR_QE0 0x00008000 #define MPC85xx_PMUXCR_QE1 0x00004000 @@ -1944,6 +1991,31 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR_SPI 0x00000000 #endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ +#if defined(CONFIG_P1010) || defined(CONFIG_P1014) +#define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 +#define MPC85xx_PMUXCR2_UART_TDM 0x80000000 +#define MPC85xx_PMUXCR2_UART_RES 0xC0000000 +#define MPC85xx_PMUXCR2_IRQ2_TRIG_IN 0x10000000 +#define MPC85xx_PMUXCR2_IRQ2_RES 0x30000000 +#define MPC85xx_PMUXCR2_IRQ3_SRESET 0x04000000 +#define MPC85xx_PMUXCR2_IRQ3_RES 0x0C000000 +#define MPC85xx_PMUXCR2_GPIO01_DRVVBUS 0x01000000 +#define MPC85xx_PMUXCR2_GPIO01_RES 0x03000000 +#define MPC85xx_PMUXCR2_GPIO23_CKSTP 0x00400000 +#define MPC85xx_PMUXCR2_GPIO23_RES 0x00800000 +#define MPC85xx_PMUXCR2_GPIO23_USB 0x00C00000 +#define MPC85xx_PMUXCR2_GPIO4_MCP 0x00100000 +#define MPC85xx_PMUXCR2_GPIO4_RES 0x00200000 +#define MPC85xx_PMUXCR2_GPIO4_CLK_OUT 0x00300000 +#define MPC85xx_PMUXCR2_GPIO5_UDE 0x00040000 +#define MPC85xx_PMUXCR2_GPIO5_RES 0x00080000 +#define MPC85xx_PMUXCR2_READY_ASLEEP 0x00020000 +#define MPC85xx_PMUXCR2_DDR_ECC_MUX 0x00010000 +#define MPC85xx_PMUXCR2_DEBUG_PORT_EXPOSE 0x00008000 +#define MPC85xx_PMUXCR2_POST_EXPOSE 0x00004000 +#define MPC85xx_PMUXCR2_DEBUG_MUX_SEL_USBPHY 0x00002000 +#define MPC85xx_PMUXCR2_PLL_LKDT_EXPOSE 0x00001000 +#endif #if defined(CONFIG_P1013) || defined(CONFIG_P1022) #define MPC85xx_PMUXCR2_ETSECUSB_MASK 0x001f1000 #define MPC85xx_PMUXCR2_USB 0x00150000 @@ -2029,6 +2101,7 @@ typedef struct serdes_corenet { #define SRDS_PLLCR0_RFCK_SEL_100 0x00000000 #define SRDS_PLLCR0_RFCK_SEL_125 0x10000000 #define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000 +#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000 #define SRDS_PLLCR0_FRATE_SEL_MASK 0x00030000 #define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 #define SRDS_PLLCR0_FRATE_SEL_6_25 0x00010000 @@ -2065,6 +2138,9 @@ typedef struct serdes_corenet { #define SRDS_TECR0_TEQ_TYPE_2LVL 0x10000000 u32 res3; u32 ttlcr0; /* Transition Tracking Loop Ctrl 0 */ +#define SRDS_TTLCR0_FLT_SEL_MASK 0x3f000000 +#define SRDS_TTLCR0_FLT_SEL_750PPM 0x03000000 +#define SRDS_TTLCR0_PM_DIS 0x00004000 u32 res4[7]; } lane[24]; u32 res6[384]; @@ -2213,6 +2289,13 @@ typedef struct ccsr_pme { u8 res4[0x400]; } ccsr_pme_t; +typedef struct ccsr_usb_phy { + u8 res0[0x18]; + u32 usb_enable_override; + u8 res[0xe4]; +} ccsr_usb_phy_t; +#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 + #ifdef CONFIG_FSL_CORENET #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000 @@ -2235,6 +2318,8 @@ typedef struct ccsr_pme { #define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000 #define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000 #define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET +#define CONFIG_SYS_MPC85xx_USB1_PHY_OFFSET 0x214000 +#define CONFIG_SYS_MPC85xx_USB2_PHY_OFFSET 0x214100 #define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x220000 #define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x221000 #define CONFIG_SYS_FSL_SEC_OFFSET 0x300000 @@ -2357,6 +2442,10 @@ typedef struct ccsr_pme { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET) #define CONFIG_SYS_MPC85xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) +#define CONFIG_SYS_MPC85xx_USB1_PHY_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB1_PHY_OFFSET) +#define CONFIG_SYS_MPC85xx_USB2_PHY_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB2_PHY_OFFSET) #define CONFIG_SYS_FSL_SEC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET) #define CONFIG_SYS_FSL_FM1_ADDR \ |