diff options
Diffstat (limited to 'arch/arm/cpu/armv7/u8500/prcmu.c')
| -rw-r--r-- | arch/arm/cpu/armv7/u8500/prcmu.c | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/u8500/prcmu.c b/arch/arm/cpu/armv7/u8500/prcmu.c new file mode 100644 index 000000000..d4337f739 --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/prcmu.c @@ -0,0 +1,269 @@ +/* + * Copyright (C) 2009 ST-Ericsson SA + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * Adapted from the Linux version: + * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> + */ + +/* + * NOTE: This currently does not support the I2C workaround access method. + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/prcmu.h> +#include <asm/types.h> +#include <asm/io.h> +#include <asm/errno.h> + +#include <asm/arch/ab8500.h> + +#include <asm/arch/common.h> +#include "prcmu-fw-defs_v1.h" + +#ifndef DEBUG +#define DEBUG 0 +#endif + +#define dbg_printk(format, arg...) \ + if (DEBUG) \ + printf("prcmu: " format, ##arg) \ + +#define PRCMU_BASE U8500_PRCMU_BASE + +#define PRCM_MBOX_CPU_VAL (PRCMU_BASE + 0x0fc) +#define PRCM_MBOX_CPU_SET (PRCMU_BASE + 0x100) +/* register for Ack mailbox interrupts */ +#define PRCM_ARM_IT1_CLEAR (PRCMU_BASE + 0x48C) +#define PRCM_ARM_IT1_VAL (PRCMU_BASE + 0x494) + +#define PRCM_XP70_CUR_PWR_STATE (tcdm_base + 0xFFC) + +#define PRCM_REQ_MB5 (tcdm_base + 0xE44) +#define PRCM_ACK_MB5 (tcdm_base + 0xDF4) + +/* Mailbox 5 Requests */ +#define PRCM_REQ_MB5_I2COPTYPE_REG (PRCM_REQ_MB5 + 0x0) +#define PRCM_REQ_MB5_BIT_FIELDS (PRCM_REQ_MB5 + 0x1) +#define PRCM_REQ_MB5_I2CSLAVE (PRCM_REQ_MB5 + 0x2) +#define PRCM_REQ_MB5_I2CVAL (PRCM_REQ_MB5 + 0x3) + +/* Mailbox 5 ACKs */ +#define PRCM_ACK_MB5_STATUS (PRCM_ACK_MB5 + 0x1) +#define PRCM_ACK_MB5_SLAVE (PRCM_ACK_MB5 + 0x2) +#define PRCM_ACK_MB5_VAL (PRCM_ACK_MB5 + 0x3) + +#define PRCMU_I2C_WRITE(slave) \ + (((slave) << 1) | I2CWRITE | (cpu_is_u8500v2() ? (1 << 6) : 0)) + +#define PRCMU_I2C_READ(slave) \ + (((slave) << 1) | I2CREAD | (cpu_is_u8500v2() ? (1 << 6) : 0)) + +#define I2C_MBOX_BIT (1 << 5) + +static void *tcdm_base; + +static int prcmu_is_ready(void) +{ + int ready; + + if (!tcdm_base) { + if (cpu_is_u8500v1()) + tcdm_base = (void *) U8500_PRCMU_TCDM_BASE_V1; + else if (cpu_is_u8500v2()) + tcdm_base = (void *) U8500_PRCMU_TCDM_BASE; + else { + printf("PRCMU: Unsupported chip version\n"); + return 0; + } + } + + ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE; + if (!ready) + printf("PRCMU firmware not ready\n"); + + return ready; +} + +static int wait_for_i2c_mbx_rdy(void) +{ + int timeout = 10000; + + if (readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) { + printf("prcmu: warning i2c mailbox was not acked\n"); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); + } + + /* check any already on-going transaction */ + while ((readl(PRCM_MBOX_CPU_VAL) & I2C_MBOX_BIT) && timeout--) + ; + + if (timeout == 0) + return -1; + + return 0; +} + +static int wait_for_i2c_req_done(void) +{ + int timeout = 10000; + + /* Set an interrupt to XP70 */ + writel(I2C_MBOX_BIT, PRCM_MBOX_CPU_SET); + + /* wait for mailbox 5 (i2c) ack */ + while (!(readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) && timeout--) + ; + + if (timeout == 0) + return -1; + + return 0; +} + +/** + * prcmu_i2c_read - PRCMU - 4500 communication using PRCMU I2C + * @reg: - db8500 register bank to be accessed + * @slave: - db8500 register to be accessed + * Returns: ACK_MB5 value containing the status + */ +int prcmu_i2c_read(u8 reg, u16 slave) +{ + uint8_t i2c_status; + uint8_t i2c_val; + int ret; + + if (!prcmu_is_ready()) + return -1; + + dbg_printk("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n", + reg, slave); + + ret = wait_for_i2c_mbx_rdy(); + if (ret) { + printf("prcmu_i2c_read: mailbox became not ready\n"); + return ret; + } + + /* prepare the data for mailbox 5 */ + writeb(PRCMU_I2C_READ(reg), PRCM_REQ_MB5_I2COPTYPE_REG); + writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); + writeb(slave, PRCM_REQ_MB5_I2CSLAVE); + writeb(0, PRCM_REQ_MB5_I2CVAL); + + ret = wait_for_i2c_req_done(); + if (ret) { + printf("prcmu_i2c_read: mailbox request timed out\n"); + return ret; + } + + /* retrieve values */ + dbg_printk("ack-mb5:transfer status = %x\n", + readb(PRCM_ACK_MB5_STATUS)); + dbg_printk("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); + dbg_printk("ack-mb5:slave_add = %x\n", + readb(PRCM_ACK_MB5_SLAVE)); + dbg_printk("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); + + i2c_status = readb(PRCM_ACK_MB5_STATUS); + i2c_val = readb(PRCM_ACK_MB5_VAL); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); + + if (i2c_status == I2C_RD_OK) + return i2c_val; + + printf("prcmu_i2c_read:read return status= %d\n", i2c_status); + return -1; +} + +/** + * prcmu_i2c_write - PRCMU-db8500 communication using PRCMU I2C + * @reg: - db8500 register bank to be accessed + * @slave: - db800 register to be written to + * @reg_data: - the data to write + * Returns: ACK_MB5 value containing the status + */ +int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data) +{ + uint8_t i2c_status; + int ret; + + if (!prcmu_is_ready()) + return -1; + + dbg_printk("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n", + reg, slave); + + ret = wait_for_i2c_mbx_rdy(); + if (ret) { + printf("prcmu_i2c_write: mailbox became not ready\n"); + return ret; + } + + /* prepare the data for mailbox 5 */ + writeb(PRCMU_I2C_WRITE(reg), PRCM_REQ_MB5_I2COPTYPE_REG); + writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); + writeb(slave, PRCM_REQ_MB5_I2CSLAVE); + writeb(reg_data, PRCM_REQ_MB5_I2CVAL); + + ret = wait_for_i2c_req_done(); + if (ret) { + printf("prcmu_i2c_write: mailbox request timed out\n"); + return ret; + } + + /* retrieve values */ + dbg_printk("ack-mb5:transfer status = %x\n", + readb(PRCM_ACK_MB5_STATUS)); + dbg_printk("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); + dbg_printk("ack-mb5:slave_add = %x\n", + readb(PRCM_ACK_MB5_SLAVE)); + dbg_printk("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); + + i2c_status = readb(PRCM_ACK_MB5_STATUS); + dbg_printk("\ni2c_status = %x\n", i2c_status); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); + + if (i2c_status == I2C_WR_OK) + return 0; + + printf("prcmu_i2c_write: i2c_status : 0x%x\n", i2c_status); + return -1; +} + +static void prcmu_enable(u32 *reg) +{ + writel(readl(reg) | (1 << 8), reg); +} + +void db8500_prcmu_init(void) +{ + /* Enable timers */ + writel(1 << 17, PRCM_TCR); + + prcmu_enable((u32 *)PRCM_PER1CLK_MGT_REG); + prcmu_enable((u32 *)PRCM_PER2CLK_MGT_REG); + prcmu_enable((u32 *)PRCM_PER3CLK_MGT_REG); + /* PER4CLK does not exist */ + prcmu_enable((u32 *)PRCM_PER5CLK_MGT_REG); + prcmu_enable((u32 *)PRCM_PER6CLK_MGT_REG); + /* Only exists in ED but is always ok to write to */ + prcmu_enable((u32 *)PRCM_PER7CLK_MGT_REG); + + prcmu_enable((u32 *)PRCM_UARTCLK_MGT_REG); + prcmu_enable((u32 *)PRCM_I2CCLK_MGT_REG); + + prcmu_enable((u32 *)PRCM_SDMMCCLK_MGT_REG); + + /* Clean up the mailbox interrupts after pre-u-boot code. */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); +} |