aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/configs/motionpro.h70
1 files changed, 27 insertions, 43 deletions
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 935b5b9a0..f7493f56b 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -47,29 +47,27 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MII
-#define CONFIG_CMD_BEDBUG
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DTT
-
+#define CONFIG_CMD_REGINFO
/*
* Serial console configuration
@@ -79,7 +77,6 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
/*
* Ethernet configuration
*/
@@ -101,11 +98,14 @@
#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
"press \"<Esc><Esc>\" to stop\n", bootdelay
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
#define CONFIG_ETHADDR 00:50:C2:40:10:00
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
-
/*
* Default environment settings
*/
@@ -117,21 +117,22 @@
"serverip=192.168.1.1\0" \
"gatewayip=192.168.1.1\0" \
"console=ttyPSC0,115200\0" \
- "u-boot_addr=100000\0" \
- "kernel_addr=200000\0" \
- "fdt_addr=400000\0" \
- "ramdisk_addr=500000\0" \
+ "u-boot_addr=400000\0" \
+ "kernel_addr=400000\0" \
+ "fdt_addr=700000\0" \
+ "ramdisk_addr=800000\0" \
"multi_image_addr=800000\0" \
- "rootpath=/opt/eldk-4.1/ppc_6xx\0" \
- "u-boot=/tftpboot/motionpro/u-boot.bin\0" \
- "bootfile=/tftpboot/motionpro/uImage\0" \
- "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \
- "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \
+ "rootpath=/opt/eldk/ppc_6xx\0" \
+ "u-boot=motionpro/u-boot.bin\0" \
+ "bootfile=motionpro/uImage\0" \
+ "fdt_file=motionpro/motionpro.dtb\0" \
+ "ramdisk_file=motionpro/uRamdisk\0" \
"multi_image_file=kernel+initrd+dtb.img\0" \
"load=tftp ${u-boot_addr} ${u-boot}\0" \
- "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \
+ "update=prot off fff00000 +${filesize};" \
+ "era fff00000 +${filesize}; " \
"cp.b ${u-boot_addr} fff00000 ${filesize};" \
- "prot on fff00000 fff3ffff\0" \
+ "prot on fff00000 +${filesize}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
@@ -160,24 +161,20 @@
*/
#define CONFIG_BOARD_EARLY_INIT_R 1
-
/*
* Low level configuration
*/
-
/*
* Clock configuration: SYS_XTALIN = 33MHz
*/
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
-
/*
* Set IPB speed to 100MHz
*/
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK
-
/*
* Memory map
*/
@@ -186,7 +183,7 @@
* Setting MBAR to otherwise will cause system hang when using SmartDMA such
* as network commands.
*/
-#define CONFIG_SYS_MBAR 0xf0000000
+#define CONFIG_SYS_MBAR 0xf0000000
#define CONFIG_SYS_SDRAM_BASE 0x00000000
/*
@@ -218,7 +215,6 @@
#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
-
/*
* Chip selects configuration
*/
@@ -251,7 +247,6 @@
#define CONFIG_SYS_CS_BURST 0x00000000
#define CONFIG_SYS_CS_DEADCYCLE 0x22222222
-
/*
* SDRAM configuration
*/
@@ -261,7 +256,6 @@
#define SDRAM_CONTROL 0x504f0000
#define SDRAM_MODE 0x00cd0000
-
/*
* Flash configuration
*/
@@ -299,7 +293,6 @@
#define CONFIG_SYS_ATA_STRIDE 4
#define CONFIG_DOS_PARTITION
-
/*
* I2C configuration
*/
@@ -308,7 +301,6 @@
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
#define CONFIG_SYS_I2C_SLAVE 0x7F
-
/*
* EEPROM configuration
*/
@@ -317,14 +309,12 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */
#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */
-
/*
* RTC configuration
*/
#define CONFIG_RTC_DS1337 1
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
/*
* Status LED configuration
*/
@@ -346,14 +336,12 @@ extern void __led_toggle(led_id_t id);
extern void __led_set(led_id_t id, int state);
#endif /* __ASSEMBLY__ */
-
/*
* Temperature sensor
*/
#define CONFIG_DTT_LM75 1
#define CONFIG_DTT_SENSORS { 0x49 }
-
/*
* Environment settings
*/
@@ -381,13 +369,11 @@ extern void __led_set(led_id_t id, int state);
*/
#define CONFIG_SYS_GPS_PORT_CONFIG 0x1105a004
-
/*
* Motion-PRO's CPLD revision control register
*/
#define CPLD_REV_REGISTER (CONFIG_SYS_CS2_START + 0x06)
-
/*
* Miscellaneous configurable options
*/
@@ -406,7 +392,6 @@ extern void __led_set(led_id_t id, int state);
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Various low-level settings
*/
@@ -415,7 +400,6 @@ extern void __led_set(led_id_t id, int state);
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-
/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
#define CONFIG_SYS_RESET_ADDRESS 0xfff00100