aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/nds32/cpu/n1213/ag101/Makefile58
-rw-r--r--arch/nds32/cpu/n1213/ag101/asm-offsets.c43
-rw-r--r--arch/nds32/cpu/n1213/ag101/cpu.c200
-rw-r--r--arch/nds32/cpu/n1213/ag101/lowlevel_init.S238
-rw-r--r--arch/nds32/cpu/n1213/ag101/timer.c205
-rw-r--r--arch/nds32/cpu/n1213/ag101/watchdog.S48
-rw-r--r--arch/nds32/include/asm/arch-ag101/ag101.h103
7 files changed, 895 insertions, 0 deletions
diff --git a/arch/nds32/cpu/n1213/ag101/Makefile b/arch/nds32/cpu/n1213/ag101/Makefile
new file mode 100644
index 000000000..8716c4e85
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag101/Makefile
@@ -0,0 +1,58 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+#
+# Copyright (C) 2011 Andes Technology Corporation
+# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+COBJS-y := cpu.o timer.o
+
+ifndef CONFIG_SKIP_LOWLEVEL_INIT
+SOBJS := lowlevel_init.o
+endif
+
+ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
+SOBJS += watchdog.o
+endif
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/nds32/cpu/n1213/ag101/asm-offsets.c b/arch/nds32/cpu/n1213/ag101/asm-offsets.c
new file mode 100644
index 000000000..92ada8ac2
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag101/asm-offsets.c
@@ -0,0 +1,43 @@
+/*
+ * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
+ *
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed to extract
+ * and format the required data.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <common.h>
+
+#include <linux/kbuild.h>
+
+int main(void)
+{
+#ifdef CONFIG_FTSMC020
+ OFFSET(FTSMC020_BANK0_CR, ftsmc020, bank[0].cr);
+ OFFSET(FTSMC020_BANK0_TPR, ftsmc020, bank[0].tpr);
+#endif
+ BLANK();
+#ifdef CONFIG_FTAHBC020S
+ OFFSET(FTAHBC020S_SLAVE_BSR_6, ftahbc02s, s_bsr[6]);
+ OFFSET(FTAHBC020S_CR, ftahbc02s, cr);
+#endif
+ BLANK();
+#ifdef CONFIG_FTPMU010
+ OFFSET(FTPMU010_PDLLCR0, ftpmu010, PDLLCR0);
+#endif
+ BLANK();
+#ifdef CONFIG_FTSDMC021
+ OFFSET(FTSDMC021_TP1, ftsdmc021, tp1);
+ OFFSET(FTSDMC021_TP2, ftsdmc021, tp2);
+ OFFSET(FTSDMC021_CR1, ftsdmc021, cr1);
+ OFFSET(FTSDMC021_CR2, ftsdmc021, cr2);
+ OFFSET(FTSDMC021_BANK0_BSR, ftsdmc021, bank0_bsr);
+ OFFSET(FTSDMC021_BANK1_BSR, ftsdmc021, bank1_bsr);
+ OFFSET(FTSDMC021_BANK2_BSR, ftsdmc021, bank2_bsr);
+ OFFSET(FTSDMC021_BANK3_BSR, ftsdmc021, bank3_bsr);
+#endif
+ return 0;
+}
diff --git a/arch/nds32/cpu/n1213/ag101/cpu.c b/arch/nds32/cpu/n1213/ag101/cpu.c
new file mode 100644
index 000000000..0ab666e8d
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag101/cpu.c
@@ -0,0 +1,200 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* CPU specific code */
+#include <common.h>
+#include <command.h>
+#include <watchdog.h>
+#include <asm/cache.h>
+
+#include <faraday/ftwdt010_wdt.h>
+
+/*
+ * cleanup_before_linux() is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we disable interrupt and caches.
+ */
+int cleanup_before_linux(void)
+{
+#ifdef CONFIG_MMU
+ unsigned long i;
+#endif
+
+ disable_interrupts();
+
+#ifdef CONFIG_MMU
+ /* turn off I/D-cache */
+ icache_disable();
+ dcache_disable();
+
+ /* flush I/D-cache */
+ invalidate_icac();
+ invalidate_dcac();
+#endif
+
+ return 0;
+}
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ disable_interrupts();
+
+ /*
+ * reset to the base addr of andesboot.
+ * currently no ROM loader at addr 0.
+ * do not use reset_cpu(0);
+ */
+#ifdef CONFIG_FTWDT010_WATCHDOG
+ /*
+ * workaround: if we use CONFIG_HW_WATCHDOG with ftwdt010, will lead
+ * automatic hardware reset when booting Linux.
+ * Please do not use CONFIG_HW_WATCHDOG and WATCHDOG_RESET() here.
+ */
+ ftwdt010_wdt_reset();
+ while (1)
+ ;
+#endif /* CONFIG_FTWDT010_WATCHDOG */
+
+ /*NOTREACHED*/
+}
+
+static inline unsigned long CACHE_LINE_SIZE(enum cache_t cache)
+{
+ if (cache == ICACHE)
+ return 8 << (((GET_ICM_CFG() & ICM_CFG_MSK_ISZ) \
+ >> ICM_CFG_OFF_ISZ) - 1);
+ else
+ return 8 << (((GET_DCM_CFG() & DCM_CFG_MSK_DSZ) \
+ >> DCM_CFG_OFF_DSZ) - 1);
+}
+
+void dcache_flush_range(unsigned long start, unsigned long end)
+{
+ unsigned long line_size;
+
+ line_size = CACHE_LINE_SIZE(DCACHE);
+
+ while (end > start) {
+ __asm__ volatile ("\n\tcctl %0, L1D_VA_WB" : : "r"(start));
+ __asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL" : : "r"(start));
+ start += line_size;
+ }
+}
+
+void icache_inval_range(unsigned long start, unsigned long end)
+{
+ unsigned long line_size;
+
+ line_size = CACHE_LINE_SIZE(ICACHE);
+ while (end > start) {
+ __asm__ volatile ("\n\tcctl %0, L1I_VA_INVAL" : : "r"(start));
+ start += line_size;
+ }
+}
+
+void flush_cache(unsigned long addr, unsigned long size)
+{
+ dcache_flush_range(addr , addr + size);
+ icache_inval_range(addr , addr + size);
+}
+
+void icache_enable(void)
+{
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "ori $p0, $p0, 0x01\n\t"
+ "mtsr $p0, $mr8\n\t"
+ "isb\n\t"
+ );
+}
+
+void icache_disable(void)
+{
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "li $p1, ~0x01\n\t"
+ "and $p0, $p0, $p1\n\t"
+ "mtsr $p0, $mr8\n\t"
+ "isb\n\t"
+ );
+}
+
+int icache_status(void)
+{
+ int ret;
+
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "andi %0, $p0, 0x01\n\t"
+ : "=r" (ret)
+ :
+ : "memory"
+ );
+
+ return ret;
+}
+
+void dcache_enable(void)
+{
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "ori $p0, $p0, 0x02\n\t"
+ "mtsr $p0, $mr8\n\t"
+ "isb\n\t"
+ );
+}
+
+void dcache_disable(void)
+{
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "li $p1, ~0x02\n\t"
+ "and $p0, $p0, $p1\n\t"
+ "mtsr $p0, $mr8\n\t"
+ "isb\n\t"
+ );
+}
+
+int dcache_status(void)
+{
+ int ret;
+
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "andi %0, $p0, 0x02\n\t"
+ : "=r" (ret)
+ :
+ : "memory"
+ );
+
+ return ret;
+}
diff --git a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S
new file mode 100644
index 000000000..29c93fe24
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+.text
+
+#include <common.h>
+#include <config.h>
+
+#include <asm/macro.h>
+#include <generated/asm-offsets.h>
+
+/*
+ * parameters for the SDRAM controller
+ */
+#define SDMC_TP1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_TP1)
+#define SDMC_TP2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_TP2)
+#define SDMC_CR1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR1)
+#define SDMC_CR2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR2)
+#define SDMC_B0_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK0_BSR)
+
+#define SDMC_TP1_D CONFIG_SYS_FTSDMC021_TP1
+#define SDMC_TP2_D CONFIG_SYS_FTSDMC021_TP2
+#define SDMC_CR1_D CONFIG_SYS_FTSDMC021_CR1
+#define SDMC_CR2_D CONFIG_SYS_FTSDMC021_CR2
+
+#define SDMC_B0_BSR_D CONFIG_SYS_FTSDMC021_BANK0_BSR
+
+/*
+ * parameters for the static memory controller
+ */
+#define SMC_BANK0_CR_A (CONFIG_FTSMC020_BASE + FTSMC020_BANK0_CR)
+#define SMC_BANK0_TPR_A (CONFIG_FTSMC020_BASE + FTSMC020_BANK0_TPR)
+
+#define SMC_BANK0_CR_D FTSMC020_BANK0_LOWLV_CONFIG
+#define SMC_BANK0_TPR_D FTSMC020_BANK0_LOWLV_TIMING
+
+/*
+ * parameters for the ahbc controller
+ */
+#define AHBC_CR_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_CR)
+#define AHBC_BSR6_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_6)
+
+#define AHBC_BSR6_D CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6
+
+/*
+ * parameters for the pmu controoler
+ */
+#define PMU_PDLLCR0_A (CONFIG_FTPMU010_BASE + FTPMU010_PDLLCR0)
+
+/*
+ * numeric 7 segment display
+ */
+.macro led, num
+ write32 CONFIG_DEBUG_LED, \num
+.endm
+
+/*
+ * Waiting for SDRAM to set up
+ */
+.macro wait_sdram
+ li $r0, CONFIG_FTSDMC021_BASE
+1:
+ lwi $r1, [$r0+FTSDMC021_CR2]
+ bnez $r1, 1b
+.endm
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+.globl lowlevel_init
+lowlevel_init:
+ move $r10, $lp
+
+ led 0x0
+ jal mem_init
+
+ led 0x10
+ jal remap
+
+ led 0x20
+ ret $r10
+
+mem_init:
+ move $r11, $lp
+
+ /*
+ * mem_init:
+ * There are 2 bank connected to FTSMC020 on AG101
+ * BANK0: FLASH/ROM (SW5, J16), BANK1: OnBoard SDRAM.
+ * we need to set onboard SDRAM before remap and relocation.
+ */
+ led 0x01
+ write32 SMC_BANK0_CR_A, SMC_BANK0_CR_D ! 0x10000052
+ write32 SMC_BANK0_TPR_A, SMC_BANK0_TPR_D ! 0x00151151
+
+ /*
+ * config AHB Controller
+ */
+ led 0x02
+ write32 AHBC_BSR6_A, AHBC_BSR6_D
+
+ /*
+ * config PMU controller
+ */
+ /* ftpmu010_dlldis_disable, must do it in lowleve_init */
+ led 0x03
+ setbf32 PMU_PDLLCR0_A, FTPMU010_PDLLCR0_DLLDIS ! 0x00010000
+
+ /*
+ * config SDRAM controller
+ */
+ led 0x04
+ write32 SDMC_TP1_A, SDMC_TP1_D ! 0x00011312
+ led 0x05
+ write32 SDMC_TP2_A, SDMC_TP2_D ! 0x00480180
+ led 0x06
+ write32 SDMC_CR1_A, SDMC_CR1_D ! 0x00002326
+
+ led 0x07
+ write32 SDMC_CR2_A, FTSDMC021_CR2_IPREC ! 0x00000010
+ wait_sdram
+
+ led 0x08
+ write32 SDMC_CR2_A, FTSDMC021_CR2_ISMR ! 0x00000004
+ wait_sdram
+
+ led 0x09
+ write32 SDMC_CR2_A, FTSDMC021_CR2_IREF ! 0x00000008
+ wait_sdram
+
+ led 0x0a
+ move $lp, $r11
+ ret
+
+remap:
+ move $r11, $lp
+#ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA - AG101 Only */
+ bal 2f
+relo_base:
+ move $r0, $lp
+#else
+relo_base:
+ mfusr $r0, $pc
+#endif /* __NDS32_N1213_43U1H__ */
+
+ /*
+ * Remapping
+ */
+ led 0x1a
+ write32 SDMC_B0_BSR_A, SDMC_B0_BSR_D ! 0x00001100
+
+ /* clear empty BSR registers */
+ led 0x1b
+ li $r4, CONFIG_FTSDMC021_BASE
+ li $r5, 0x0
+ swi $r5, [$r4 + FTSDMC021_BANK1_BSR]
+ swi $r5, [$r4 + FTSDMC021_BANK2_BSR]
+ swi $r5, [$r4 + FTSDMC021_BANK3_BSR]
+
+#ifdef CONFIG_MEM_REMAP
+ /*
+ * Copy ROM code to SDRAM base for memory remap layout.
+ * This is not the real relocation, the real relocation is the function
+ * relocate_code() is start.S which supports the systems is memory
+ * remapped or not.
+ */
+ /*
+ * Doing memory remap is essential for preparing some non-OS or RTOS
+ * applications.
+ *
+ * This is also a must on ADP-AG101 board.
+ * The reason is because the ROM/FLASH circuit on PCB board.
+ * AG101-A0 board has 2 jumpers MA17 and SW5 to configure which
+ * ROM/FLASH is used to boot.
+ *
+ * When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0,
+ * and the FLASH is connected to BANK1.
+ * When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0),
+ * and the FLASH is connected to BANK0.
+ * It will occur problem when doing flash probing if the flash is at
+ * BANK0 (0x00000000) while memory remapping was skipped.
+ *
+ * Other board like ADP-AG101P may not enable this since there is only
+ * a FLASH connected to bank0.
+ */
+ led 0x11
+ li $r4, PHYS_SDRAM_0_AT_INIT /* 0x10000000 */
+ li $r5, 0x0
+ la $r1, relo_base /* get $pc or $lp */
+ sub $r2, $r0, $r1
+ sethi $r6, hi20(_end)
+ ori $r6, $r6, lo12(_end)
+ add $r6, $r6, $r2
+1:
+ lwi.p $r7, [$r5], #4
+ swi.p $r7, [$r4], #4
+ blt $r5, $r6, 1b
+
+ /* set remap bit */
+ /*
+ * MEM remap bit is operational
+ * - use it to map writeable memory at 0x00000000, in place of flash
+ * - before remap: flash/rom 0x00000000, sdram: 0x10000000-0x4fffffff
+ * - after remap: flash/rom 0x80000000, sdram: 0x00000000
+ */
+ led 0x1c
+ setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1
+
+#endif /* #ifdef CONFIG_MEM_REMAP */
+ move $lp, $r11
+2:
+ ret
+
+.globl show_led
+show_led:
+ li $r8, (CONFIG_DEBUG_LED)
+ swi $r7, [$r8]
+ ret
+#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/arch/nds32/cpu/n1213/ag101/timer.c b/arch/nds32/cpu/n1213/ag101/timer.c
new file mode 100644
index 000000000..c099c33ac
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag101/timer.c
@@ -0,0 +1,205 @@
+/*
+ * (C) Copyright 2009 Faraday Technology
+ * Po-Yu Chuang <ratbert@faraday-tech.com>
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <faraday/fttmr010.h>
+
+static ulong timestamp;
+static ulong lastdec;
+
+int timer_init(void)
+{
+ static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
+ unsigned int cr;
+
+ debug("%s()\n", __func__);
+
+ /* disable timers */
+ writel(0, &tmr->cr);
+
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ /* use 32768Hz oscillator for RTC, WDT, TIMER */
+ ftpmu010_32768osc_enable();
+#endif
+
+ /* setup timer */
+ writel(TIMER_LOAD_VAL, &tmr->timer3_load);
+ writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
+ writel(0, &tmr->timer3_match1);
+ writel(0, &tmr->timer3_match2);
+
+ /* we don't want timer to issue interrupts */
+ writel(FTTMR010_TM3_MATCH1 |
+ FTTMR010_TM3_MATCH2 |
+ FTTMR010_TM3_OVERFLOW,
+ &tmr->interrupt_mask);
+
+ cr = readl(&tmr->cr);
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ cr |= FTTMR010_TM3_CLOCK; /* use external clock */
+#endif
+ cr |= FTTMR010_TM3_ENABLE;
+ writel(cr, &tmr->cr);
+
+ /* init the timestamp and lastdec value */
+ reset_timer_masked();
+
+ return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+
+/*
+ * reset time
+ */
+void reset_timer_masked(void)
+{
+ static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
+
+ /* capure current decrementer value time */
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
+#else
+ lastdec = readl(&tmr->timer3_counter) / (CONFIG_SYS_CLK_FREQ / 2);
+#endif
+ timestamp = 0; /* start "advancing" time stamp from 0 */
+
+ debug("%s(): lastdec = %lx\n", __func__, lastdec);
+}
+
+void reset_timer(void)
+{
+ debug("%s()\n", __func__);
+ reset_timer_masked();
+}
+
+/*
+ * return timer ticks
+ */
+ulong get_timer_masked(void)
+{
+ static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
+
+ /* current tick value */
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
+#else
+ ulong now = readl(&tmr->timer3_counter) / \
+ (CONFIG_SYS_CLK_FREQ / 2 / 1024);
+#endif
+
+ debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
+
+ if (lastdec >= now) {
+ /*
+ * normal mode (non roll)
+ * move stamp fordward with absoulte diff ticks
+ */
+ timestamp += lastdec - now;
+ } else {
+ /*
+ * we have overflow of the count down timer
+ *
+ * nts = ts + ld + (TLV - now)
+ * ts=old stamp, ld=time that passed before passing through -1
+ * (TLV-now) amount of time after passing though -1
+ * nts = new "advancing time stamp"...it could also roll and
+ * cause problems.
+ */
+ timestamp += lastdec + TIMER_LOAD_VAL - now;
+ }
+
+ lastdec = now;
+
+ debug("%s() returns %lx\n", __func__, timestamp);
+
+ return timestamp;
+}
+
+/*
+ * return difference between timer ticks and base
+ */
+ulong get_timer(ulong base)
+{
+ debug("%s(%lx)\n", __func__, base);
+ return get_timer_masked() - base;
+}
+
+void set_timer(ulong t)
+{
+ debug("%s(%lx)\n", __func__, t);
+ timestamp = t;
+}
+
+/* delay x useconds AND preserve advance timestamp value */
+void __udelay(unsigned long usec)
+{
+ static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
+
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
+#else
+ long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000;
+#endif
+ unsigned long now, last = readl(&tmr->timer3_counter);
+
+ debug("%s(%lu)\n", __func__, usec);
+ while (tmo > 0) {
+ now = readl(&tmr->timer3_counter);
+ if (now > last) /* count down timer overflow */
+ tmo -= TIMER_LOAD_VAL + last - now;
+ else
+ tmo -= last - now;
+ last = now;
+ }
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ debug("%s()\n", __func__);
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ debug("%s()\n", __func__);
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ return CONFIG_SYS_HZ;
+#else
+ return CONFIG_SYS_CLK_FREQ;
+#endif
+}
diff --git a/arch/nds32/cpu/n1213/ag101/watchdog.S b/arch/nds32/cpu/n1213/ag101/watchdog.S
new file mode 100644
index 000000000..fc39f3f30
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag101/watchdog.S
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch-ag101/ag101.h>
+
+.text
+
+#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
+.globl turnoff_watchdog
+turnoff_watchdog:
+
+#define WD_CR 0xC
+#define WD_ENABLE 0x1
+
+ ! Turn off the watchdog, according to Faraday FTWDT010 spec
+ li $p0, (CONFIG_FTWDT010_BASE+WD_CR) ! Get the addr of WD CR
+ lwi $p1, [$p0] ! Get the config of WD
+ andi $p1, $p1, 0x1f ! Wipe out useless bits
+ li $r0, ~WD_ENABLE
+ and $p1, $p1, $r0 ! Set WD disable
+ sw $p1, [$p0] ! Write back to WD CR
+
+ ! Disable Interrupts by clear GIE in $PSW reg
+ setgie.d
+
+ ret
+
+#endif
diff --git a/arch/nds32/include/asm/arch-ag101/ag101.h b/arch/nds32/include/asm/arch-ag101/ag101.h
new file mode 100644
index 000000000..141ba2a9a
--- /dev/null
+++ b/arch/nds32/include/asm/arch-ag101/ag101.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Nobuhiro Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __AG101_H
+#define __AG101_H
+
+/* Hardware register bases */
+
+/* AHB Controller */
+#define CONFIG_FTAHBC020S_BASE 0x90100000
+/* Static Memory Controller (SRAM) */
+#define CONFIG_FTSMC020_BASE 0x90200000
+/* FTSDMC021 SDRAM Controller */
+#define CONFIG_FTSDMC021_BASE 0x90300000
+/* DMA Controller */
+#define CONFIG_FTDMAC020_BASE 0x90400000
+/* AHB-to-APB Bridge */
+#define CONFIG_FTAPBBRG020S_01_BASE 0x90500000
+/* LCD Controller */
+#define CONFIG_FTLCDC100_BASE 0x90600000
+/* Reserved */
+#define CONFIG_RESERVED_01_BASE 0x90700000
+/* Reserved */
+#define CONFIG_RESERVED_02_BASE 0x90800000
+/* Ethernet */
+#define CONFIG_FTMAC100_BASE 0x90900000
+/* External USB host */
+#define CONFIG_EXT_USB_HOST_BASE 0x90A00000
+/* USB Device */
+#define CONFIG_USB_DEV_BASE 0x90B00000
+/* External AHB-to-PCI Bridge (FTPCI100 not exist in ag101) */
+#define CONFIG_EXT_AHBPCIBRG_BASE 0x90C00000
+/* Reserved */
+#define CONFIG_RESERVED_03_BASE 0x90D00000
+/* External AHB-to-APB Bridger (FTAPBBRG020S_02) */
+#define CONFIG_EXT_AHBAPBBRG_BASE 0x90E00000
+/* External AHB slave1 (LCD) */
+#define CONFIG_EXT_AHBSLAVE01_BASE 0x90F00000
+/* External AHB slave2 (FUSBH200) */
+#define CONFIG_EXT_AHBSLAVE02_BASE 0x92000000
+
+/* DEBUG LED */
+#define CONFIG_DEBUG_LED 0x902FFFFC
+
+/* APB Device definitions */
+
+/* Power Management Unit */
+#define CONFIG_FTPMU010_BASE 0x98100000
+/* BT UART 2/IrDA (UART 01 in Linux) */
+#define CONFIG_FTUART010_01_BASE 0x98300000
+/* Counter/Timers */
+#define CONFIG_FTTMR010_BASE 0x98400000
+/* Watchdog Timer */
+#define CONFIG_FTWDT010_BASE 0x98500000
+/* Real Time Clock */
+#define CONFIG_FTRTC010_BASE 0x98600000
+/* GPIO */
+#define CONFIG_FTGPIO010_BASE 0x98700000
+/* Interrupt Controller */
+#define CONFIG_FTINTC010_BASE 0x98800000
+/* I2C */
+#define CONFIG_FTIIC010_BASE 0x98A00000
+/* Reserved */
+#define CONFIG_RESERVED_04_BASE 0x98C00000
+/* Compat Flash Controller */
+#define CONFIG_FTCFC010_BASE 0x98D00000
+/* SD Controller */
+#define CONFIG_FTSDC010_BASE 0x98E00000
+
+/* Synchronous Serial Port Controller (SSP) I2S/AC97 */
+#define CONFIG_FTSSP010_02_BASE 0x99400000
+/* ST UART ? SSP 02 (UART 02 in Linux) */
+#define CONFIG_FTUART010_02_BASE 0x99600000
+
+/* The following address was not defined in Linux */
+
+/* FF UART 3 */
+#define CONFIG_FTUART010_03_BASE 0x98200000
+/* Synchronous Serial Port Controller (SSP) 01 */
+#define CONFIG_FTSSP010_01_BASE 0x98B00000
+/* IrDA */
+#define CONFIG_IRDA_BASE 0x98900000
+/* PWM - Pulse Width Modulator Controller */
+#define CONFIG_PMW_BASE 0x99100000
+
+#endif /* __AG101_H */