aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/davinci/dm355evm/dm355evm.c10
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/e1000.c88
-rw-r--r--drivers/net/ftmac100.c278
-rw-r--r--drivers/net/ftmac100.h154
-rw-r--r--drivers/net/kirkwood_egiga.c15
-rw-r--r--drivers/net/phy/mv88e61xx.c23
-rw-r--r--drivers/qe/uec.c17
-rw-r--r--drivers/qe/uec_phy.c36
-rw-r--r--include/netdev.h1
10 files changed, 538 insertions, 85 deletions
diff --git a/board/davinci/dm355evm/dm355evm.c b/board/davinci/dm355evm/dm355evm.c
index 398f52775..0a4474832 100644
--- a/board/davinci/dm355evm/dm355evm.c
+++ b/board/davinci/dm355evm/dm355evm.c
@@ -23,7 +23,8 @@
#include <asm/arch/emif_defs.h>
#include <asm/arch/nand_defs.h>
#include "../common/misc.h"
-
+#include <net.h>
+#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -79,6 +80,13 @@ int board_init(void)
return 0;
}
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+ return dm9000_initialize(bis);
+}
+#endif
+
#ifdef CONFIG_NAND_DAVINCI
static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 34b56d825..1c6e40224 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -39,6 +39,7 @@ COBJS-$(CONFIG_EEPRO100) += eepro100.o
COBJS-$(CONFIG_ENC28J60) += enc28j60.o
COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
+COBJS-$(CONFIG_FTMAC100) += ftmac100.o
COBJS-$(CONFIG_GRETH) += greth.o
COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
COBJS-$(CONFIG_KIRKWOOD_EGIGA) += kirkwood_egiga.o
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index e3c6cea44..777783a91 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -126,9 +126,6 @@ static int e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
static int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
static int e1000_phy_reset(struct e1000_hw *hw);
static int e1000_detect_gig_phy(struct e1000_hw *hw);
-static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset,
- uint16_t words,
- uint16_t *data);
static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
static void e1000_set_media_type(struct e1000_hw *hw);
@@ -143,6 +140,9 @@ static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
#define E1000_WRITE_FLUSH(a) {uint32_t x; x = E1000_READ_REG(a, STATUS);}
#ifndef CONFIG_AP1000 /* remove for warnings */
+static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset,
+ uint16_t words,
+ uint16_t *data);
/******************************************************************************
* Raises the EEPROM's clock input.
*
@@ -896,6 +896,47 @@ e1000_validate_eeprom_checksum(struct eth_device *nic)
return -E1000_ERR_EEPROM;
}
}
+
+/*****************************************************************************
+ * Set PHY to class A mode
+ * Assumes the following operations will follow to enable the new class mode.
+ * 1. Do a PHY soft reset
+ * 2. Restart auto-negotiation or force link.
+ *
+ * hw - Struct containing variables accessed by shared code
+ ****************************************************************************/
+static int32_t
+e1000_set_phy_mode(struct e1000_hw *hw)
+{
+ int32_t ret_val;
+ uint16_t eeprom_data;
+
+ DEBUGFUNC();
+
+ if ((hw->mac_type == e1000_82545_rev_3) &&
+ (hw->media_type == e1000_media_type_copper)) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD,
+ 1, &eeprom_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((eeprom_data != EEPROM_RESERVED_WORD) &&
+ (eeprom_data & EEPROM_PHY_CLASS_A)) {
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_PHY_PAGE_SELECT, 0x000B);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_PHY_GEN_CONTROL, 0x8104);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_reset_disable = FALSE;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
#endif /* #ifndef CONFIG_AP1000 */
/***************************************************************************
@@ -1999,47 +2040,6 @@ e1000_setup_fiber_link(struct eth_device *nic)
return 0;
}
-/*****************************************************************************
- * Set PHY to class A mode
- * Assumes the following operations will follow to enable the new class mode.
- * 1. Do a PHY soft reset
- * 2. Restart auto-negotiation or force link.
- *
- * hw - Struct containing variables accessed by shared code
- ****************************************************************************/
-static int32_t
-e1000_set_phy_mode(struct e1000_hw *hw)
-{
- int32_t ret_val;
- uint16_t eeprom_data;
-
- DEBUGFUNC();
-
- if ((hw->mac_type == e1000_82545_rev_3) &&
- (hw->media_type == e1000_media_type_copper)) {
- ret_val = e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD,
- 1, &eeprom_data);
- if (ret_val)
- return ret_val;
-
- if ((eeprom_data != EEPROM_RESERVED_WORD) &&
- (eeprom_data & EEPROM_PHY_CLASS_A)) {
- ret_val = e1000_write_phy_reg(hw,
- M88E1000_PHY_PAGE_SELECT, 0x000B);
- if (ret_val)
- return ret_val;
- ret_val = e1000_write_phy_reg(hw,
- M88E1000_PHY_GEN_CONTROL, 0x8104);
- if (ret_val)
- return ret_val;
-
- hw->phy_reset_disable = FALSE;
- }
- }
-
- return E1000_SUCCESS;
-}
-
/******************************************************************************
* Make sure we have a valid PHY and change PHY mode before link setup.
*
diff --git a/drivers/net/ftmac100.c b/drivers/net/ftmac100.c
new file mode 100644
index 000000000..2328cb51d
--- /dev/null
+++ b/drivers/net/ftmac100.c
@@ -0,0 +1,278 @@
+/*
+ * Faraday FTMAC100 Ethernet
+ *
+ * (C) Copyright 2009 Faraday Technology
+ * Po-Yu Chuang <ratbert@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+
+#include "ftmac100.h"
+
+#define ETH_ZLEN 60
+
+struct ftmac100_data {
+ volatile struct ftmac100_txdes txdes[1];
+ volatile struct ftmac100_rxdes rxdes[PKTBUFSRX];
+ int rx_index;
+};
+
+/*
+ * Reset MAC
+ */
+static void ftmac100_reset (struct eth_device *dev)
+{
+ struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase;
+
+ debug ("%s()\n", __func__);
+
+ writel (FTMAC100_MACCR_SW_RST, &ftmac100->maccr);
+
+ while (readl (&ftmac100->maccr) & FTMAC100_MACCR_SW_RST)
+ ;
+}
+
+/*
+ * Set MAC address
+ */
+static void ftmac100_set_mac (struct eth_device *dev, const unsigned char *mac)
+{
+ struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase;
+ unsigned int maddr = mac[0] << 8 | mac[1];
+ unsigned int laddr = mac[2] << 24 | mac[3] << 16 | mac[4] << 8 | mac[5];
+
+ debug ("%s(%x %x)\n", __func__, maddr, laddr);
+
+ writel (maddr, &ftmac100->mac_madr);
+ writel (laddr, &ftmac100->mac_ladr);
+}
+
+static void ftmac100_set_mac_from_env (struct eth_device *dev)
+{
+ eth_getenv_enetaddr ("ethaddr", dev->enetaddr);
+
+ ftmac100_set_mac (dev, dev->enetaddr);
+}
+
+/*
+ * disable transmitter, receiver
+ */
+static void ftmac100_halt (struct eth_device *dev)
+{
+ struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase;
+
+ debug ("%s()\n", __func__);
+
+ writel (0, &ftmac100->maccr);
+}
+
+static int ftmac100_init (struct eth_device *dev, bd_t *bd)
+{
+ struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase;
+ struct ftmac100_data *priv = dev->priv;
+ volatile struct ftmac100_txdes *txdes = priv->txdes;
+ volatile struct ftmac100_rxdes *rxdes = priv->rxdes;
+ unsigned int maccr;
+ int i;
+
+ debug ("%s()\n", __func__);
+
+ ftmac100_reset (dev);
+
+ /* set the ethernet address */
+
+ ftmac100_set_mac_from_env (dev);
+
+ /* disable all interrupts */
+
+ writel (0, &ftmac100->imr);
+
+ /* initialize descriptors */
+
+ priv->rx_index = 0;
+
+ txdes[0].txdes1 = FTMAC100_TXDES1_EDOTR;
+ rxdes[PKTBUFSRX - 1].rxdes1 = FTMAC100_RXDES1_EDORR;
+
+ for (i = 0; i < PKTBUFSRX; i++) {
+ /* RXBUF_BADR */
+ rxdes[i].rxdes2 = (unsigned int)NetRxPackets[i];
+ rxdes[i].rxdes1 |= FTMAC100_RXDES1_RXBUF_SIZE (PKTSIZE_ALIGN);
+ rxdes[i].rxdes0 = FTMAC100_RXDES0_RXDMA_OWN;
+ }
+
+ /* transmit ring */
+
+ writel ((unsigned int)txdes, &ftmac100->txr_badr);
+
+ /* receive ring */
+
+ writel ((unsigned int)rxdes, &ftmac100->rxr_badr);
+
+ /* poll receive descriptor automatically */
+
+ writel (FTMAC100_APTC_RXPOLL_CNT (1), &ftmac100->aptc);
+
+ /* enable transmitter, receiver */
+
+ maccr = FTMAC100_MACCR_XMT_EN |
+ FTMAC100_MACCR_RCV_EN |
+ FTMAC100_MACCR_XDMA_EN |
+ FTMAC100_MACCR_RDMA_EN |
+ FTMAC100_MACCR_CRC_APD |
+ FTMAC100_MACCR_ENRX_IN_HALFTX |
+ FTMAC100_MACCR_RX_RUNT |
+ FTMAC100_MACCR_RX_BROADPKT;
+
+ writel (maccr, &ftmac100->maccr);
+
+ return 0;
+}
+
+/*
+ * Get a data block via Ethernet
+ */
+static int ftmac100_recv (struct eth_device *dev)
+{
+ struct ftmac100_data *priv = dev->priv;
+ volatile struct ftmac100_rxdes *curr_des;
+ unsigned short rxlen;
+
+ curr_des = &priv->rxdes[priv->rx_index];
+
+ if (curr_des->rxdes0 & FTMAC100_RXDES0_RXDMA_OWN)
+ return -1;
+
+ if (curr_des->rxdes0 & (FTMAC100_RXDES0_RX_ERR |
+ FTMAC100_RXDES0_CRC_ERR |
+ FTMAC100_RXDES0_FTL |
+ FTMAC100_RXDES0_RUNT |
+ FTMAC100_RXDES0_RX_ODD_NB)) {
+ return -1;
+ }
+
+ rxlen = FTMAC100_RXDES0_RFL (curr_des->rxdes0);
+
+ debug ("%s(): RX buffer %d, %x received\n",
+ __func__, priv->rx_index, rxlen);
+
+ /* pass the packet up to the protocol layers. */
+
+ NetReceive ((void *)curr_des->rxdes2, rxlen);
+
+ /* release buffer to DMA */
+
+ curr_des->rxdes0 |= FTMAC100_RXDES0_RXDMA_OWN;
+
+ priv->rx_index = (priv->rx_index + 1) % PKTBUFSRX;
+
+ return 0;
+}
+
+/*
+ * Send a data block via Ethernet
+ */
+static int
+ftmac100_send (struct eth_device *dev, volatile void *packet, int length)
+{
+ struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase;
+ struct ftmac100_data *priv = dev->priv;
+ volatile struct ftmac100_txdes *curr_des = priv->txdes;
+ int tmo;
+
+ if (curr_des->txdes0 & FTMAC100_TXDES0_TXDMA_OWN) {
+ debug ("%s(): no TX descriptor available\n", __func__);
+ return -1;
+ }
+
+ debug ("%s(%x, %x)\n", __func__, (int)packet, length);
+
+ length = (length < ETH_ZLEN) ? ETH_ZLEN : length;
+
+ /* initiate a transmit sequence */
+
+ curr_des->txdes2 = (unsigned int)packet; /* TXBUF_BADR */
+
+ curr_des->txdes1 &= FTMAC100_TXDES1_EDOTR;
+ curr_des->txdes1 |= FTMAC100_TXDES1_FTS |
+ FTMAC100_TXDES1_LTS |
+ FTMAC100_TXDES1_TXBUF_SIZE (length);
+
+ curr_des->txdes0 = FTMAC100_TXDES0_TXDMA_OWN;
+
+ /* start transmit */
+
+ writel (1, &ftmac100->txpd);
+
+ /* wait for transfer to succeed */
+
+ tmo = get_timer (0) + 5 * CONFIG_SYS_HZ;
+ while (curr_des->txdes0 & FTMAC100_TXDES0_TXDMA_OWN) {
+ if (get_timer (0) >= tmo) {
+ debug ("%s(): timed out\n", __func__);
+ return -1;
+ }
+ }
+
+ debug ("%s(): packet sent\n", __func__);
+
+ return 0;
+}
+
+int ftmac100_initialize (bd_t *bd)
+{
+ struct eth_device *dev;
+ struct ftmac100_data *priv;
+
+ dev = malloc (sizeof *dev);
+ if (!dev) {
+ printf ("%s(): failed to allocate dev\n", __func__);
+ goto out;
+ }
+
+ /* Transmit and receive descriptors should align to 16 bytes */
+
+ priv = memalign (16, sizeof (struct ftmac100_data));
+ if (!priv) {
+ printf ("%s(): failed to allocate priv\n", __func__);
+ goto free_dev;
+ }
+
+ memset (dev, 0, sizeof (*dev));
+ memset (priv, 0, sizeof (*priv));
+
+ sprintf (dev->name, "FTMAC100");
+ dev->iobase = CONFIG_FTMAC100_BASE;
+ dev->init = ftmac100_init;
+ dev->halt = ftmac100_halt;
+ dev->send = ftmac100_send;
+ dev->recv = ftmac100_recv;
+ dev->priv = priv;
+
+ eth_register (dev);
+
+ return 1;
+
+free_dev:
+ free (dev);
+out:
+ return 0;
+}
diff --git a/drivers/net/ftmac100.h b/drivers/net/ftmac100.h
new file mode 100644
index 000000000..21142d966
--- /dev/null
+++ b/drivers/net/ftmac100.h
@@ -0,0 +1,154 @@
+/*
+ * Faraday FTMAC100 Ethernet
+ *
+ * (C) Copyright 2009 Faraday Technology
+ * Po-Yu Chuang <ratbert@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __FTMAC100_H
+#define __FTMAC100_H
+
+struct ftmac100 {
+ unsigned int isr; /* 0x00 */
+ unsigned int imr; /* 0x04 */
+ unsigned int mac_madr; /* 0x08 */
+ unsigned int mac_ladr; /* 0x0c */
+ unsigned int maht0; /* 0x10 */
+ unsigned int maht1; /* 0x14 */
+ unsigned int txpd; /* 0x18 */
+ unsigned int rxpd; /* 0x1c */
+ unsigned int txr_badr; /* 0x20 */
+ unsigned int rxr_badr; /* 0x24 */
+ unsigned int itc; /* 0x28 */
+ unsigned int aptc; /* 0x2c */
+ unsigned int dblac; /* 0x30 */
+ unsigned int pad1[3]; /* 0x34 - 0x3c */
+ unsigned int pad2[16]; /* 0x40 - 0x7c */
+ unsigned int pad3[2]; /* 0x80 - 0x84 */
+ unsigned int maccr; /* 0x88 */
+ unsigned int macsr; /* 0x8c */
+ unsigned int phycr; /* 0x90 */
+ unsigned int phywdata; /* 0x94 */
+ unsigned int fcr; /* 0x98 */
+ unsigned int bpr; /* 0x9c */
+ unsigned int pad4[8]; /* 0xa0 - 0xbc */
+ unsigned int pad5; /* 0xc0 */
+ unsigned int ts; /* 0xc4 */
+ unsigned int dmafifos; /* 0xc8 */
+ unsigned int tm; /* 0xcc */
+ unsigned int pad6; /* 0xd0 */
+ unsigned int tx_mcol_scol; /* 0xd4 */
+ unsigned int rpf_aep; /* 0xd8 */
+ unsigned int xm_pg; /* 0xdc */
+ unsigned int runt_tlcc; /* 0xe0 */
+ unsigned int crcer_ftl; /* 0xe4 */
+ unsigned int rlc_rcc; /* 0xe8 */
+ unsigned int broc; /* 0xec */
+ unsigned int mulca; /* 0xf0 */
+ unsigned int rp; /* 0xf4 */
+ unsigned int xp; /* 0xf8 */
+};
+
+/*
+ * Interrupt status register & interrupt mask register
+ */
+#define FTMAC100_INT_RPKT_FINISH (1 << 0)
+#define FTMAC100_INT_NORXBUF (1 << 1)
+#define FTMAC100_INT_XPKT_FINISH (1 << 2)
+#define FTMAC100_INT_NOTXBUF (1 << 3)
+#define FTMAC100_INT_XPKT_OK (1 << 4)
+#define FTMAC100_INT_XPKT_LOST (1 << 5)
+#define FTMAC100_INT_RPKT_SAV (1 << 6)
+#define FTMAC100_INT_RPKT_LOST (1 << 7)
+#define FTMAC100_INT_AHB_ERR (1 << 8)
+#define FTMAC100_INT_PHYSTS_CHG (1 << 9)
+
+/*
+ * Automatic polling timer control register
+ */
+#define FTMAC100_APTC_RXPOLL_CNT(x) (((x) & 0xf) << 0)
+#define FTMAC100_APTC_RXPOLL_TIME_SEL (1 << 4)
+#define FTMAC100_APTC_TXPOLL_CNT(x) (((x) & 0xf) << 8)
+#define FTMAC100_APTC_TXPOLL_TIME_SEL (1 << 12)
+
+/*
+ * MAC control register
+ */
+#define FTMAC100_MACCR_XDMA_EN (1 << 0)
+#define FTMAC100_MACCR_RDMA_EN (1 << 1)
+#define FTMAC100_MACCR_SW_RST (1 << 2)
+#define FTMAC100_MACCR_LOOP_EN (1 << 3)
+#define FTMAC100_MACCR_CRC_DIS (1 << 4)
+#define FTMAC100_MACCR_XMT_EN (1 << 5)
+#define FTMAC100_MACCR_ENRX_IN_HALFTX (1 << 6)
+#define FTMAC100_MACCR_RCV_EN (1 << 8)
+#define FTMAC100_MACCR_HT_MULTI_EN (1 << 9)
+#define FTMAC100_MACCR_RX_RUNT (1 << 10)
+#define FTMAC100_MACCR_RX_FTL (1 << 11)
+#define FTMAC100_MACCR_RCV_ALL (1 << 12)
+#define FTMAC100_MACCR_CRC_APD (1 << 14)
+#define FTMAC100_MACCR_FULLDUP (1 << 15)
+#define FTMAC100_MACCR_RX_MULTIPKT (1 << 16)
+#define FTMAC100_MACCR_RX_BROADPKT (1 << 17)
+
+/*
+ * Transmit descriptor, aligned to 16 bytes
+ */
+struct ftmac100_txdes {
+ unsigned int txdes0;
+ unsigned int txdes1;
+ unsigned int txdes2; /* TXBUF_BADR */
+ unsigned int txdes3; /* not used by HW */
+} __attribute__ ((aligned(16)));
+
+#define FTMAC100_TXDES0_TXPKT_LATECOL (1 << 0)
+#define FTMAC100_TXDES0_TXPKT_EXSCOL (1 << 1)
+#define FTMAC100_TXDES0_TXDMA_OWN (1 << 31)
+
+#define FTMAC100_TXDES1_TXBUF_SIZE(x) ((x) & 0x7ff)
+#define FTMAC100_TXDES1_LTS (1 << 27)
+#define FTMAC100_TXDES1_FTS (1 << 28)
+#define FTMAC100_TXDES1_TX2FIC (1 << 29)
+#define FTMAC100_TXDES1_TXIC (1 << 30)
+#define FTMAC100_TXDES1_EDOTR (1 << 31)
+
+/*
+ * Receive descriptor, aligned to 16 bytes
+ */
+struct ftmac100_rxdes {
+ unsigned int rxdes0;
+ unsigned int rxdes1;
+ unsigned int rxdes2; /* RXBUF_BADR */
+ unsigned int rxdes3; /* not used by HW */
+} __attribute__ ((aligned(16)));
+
+#define FTMAC100_RXDES0_RFL(des) ((des) & 0x7ff)
+#define FTMAC100_RXDES0_MULTICAST (1 << 16)
+#define FTMAC100_RXDES0_BROADCAST (1 << 17)
+#define FTMAC100_RXDES0_RX_ERR (1 << 18)
+#define FTMAC100_RXDES0_CRC_ERR (1 << 19)
+#define FTMAC100_RXDES0_FTL (1 << 20)
+#define FTMAC100_RXDES0_RUNT (1 << 21)
+#define FTMAC100_RXDES0_RX_ODD_NB (1 << 22)
+#define FTMAC100_RXDES0_LRS (1 << 28)
+#define FTMAC100_RXDES0_FRS (1 << 29)
+#define FTMAC100_RXDES0_RXDMA_OWN (1 << 31)
+
+#define FTMAC100_RXDES1_RXBUF_SIZE(x) ((x) & 0x7ff)
+#define FTMAC100_RXDES1_EDORR (1 << 31)
+
+#endif /* __FTMAC100_H */
diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c
index 701812bf1..f31fefcb0 100644
--- a/drivers/net/kirkwood_egiga.c
+++ b/drivers/net/kirkwood_egiga.c
@@ -592,7 +592,7 @@ int kirkwood_egiga_initialize(bd_t * bis)
struct kwgbe_device *dkwgbe;
struct eth_device *dev;
int devnum;
- char *s, buf[NAMESIZE * 2];
+ char *s;
u8 used_ports[MAX_KWGBE_DEVS] = CONFIG_KIRKWOOD_EGIGA_PORTS;
for (devnum = 0; devnum < MAX_KWGBE_DEVS; devnum++) {
@@ -650,11 +650,14 @@ int kirkwood_egiga_initialize(bd_t * bis)
}
while (!eth_getenv_enetaddr(s, dev->enetaddr)) {
- /* Generate Ramdom MAC addresses if not set */
- sprintf(buf, "00:50:43:%02x:%02x:%02x",
- get_random_hex(), get_random_hex(),
- get_random_hex());
- setenv(s, buf);
+ /* Generate Random Private MAC addr if not set */
+ dev->enetaddr[0] = 0x02;
+ dev->enetaddr[1] = 0x50;
+ dev->enetaddr[2] = 0x43;
+ dev->enetaddr[3] = get_random_hex();
+ dev->enetaddr[4] = get_random_hex();
+ dev->enetaddr[5] = get_random_hex();
+ eth_setenv_enetaddr(s, dev->enetaddr);
}
dev->init = (void *)kwgbe_init;
diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
index 29630f5bf..3754e8bdc 100644
--- a/drivers/net/phy/mv88e61xx.c
+++ b/drivers/net/phy/mv88e61xx.c
@@ -38,7 +38,7 @@
*/
static int mv88e61xx_busychk_multic(char *name, u32 devaddr)
{
- u32 reg = 0;
+ u16 reg = 0;
u32 timeout = MV88E61XX_PHY_TIMEOUT;
/* Poll till SMIBusy bit is clear */
@@ -54,8 +54,7 @@ static int mv88e61xx_busychk_multic(char *name, u32 devaddr)
static void mv88e61xx_wr_phy(char *name, u32 phy_adr, u32 reg_ofs, u16 data)
{
- u16 reg;
- u32 mii_dev_addr;
+ u16 mii_dev_addr;
/* command to read PHY dev address */
if (miiphy_read(name, 0xEE, 0xEE, &mii_dev_addr)) {
@@ -73,8 +72,7 @@ static void mv88e61xx_wr_phy(char *name, u32 phy_adr, u32 reg_ofs, u16 data)
static void mv88e61xx_rd_phy(char *name, u32 phy_adr, u32 reg_ofs, u16 * data)
{
- u16 reg;
- u32 mii_dev_addr;
+ u16 mii_dev_addr;
/* command to read PHY dev address */
if (miiphy_read(name, 0xEE, 0xEE, &mii_dev_addr)) {
@@ -357,15 +355,22 @@ int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig)
}
RD_PHY(name, MV88E61XX_PRT_OFST, PHY_PHYIDR2, &reg);
- reg &= 0xfff0;
- if (reg == 0x1610)
+ switch (reg &= 0xfff0) {
+ case 0x1610:
idstr = "88E6161";
- if (reg == 0x1650)
+ break;
+ case 0x1650:
idstr = "88E6165";
- if (reg == 0x1210) {
+ break;
+ case 0x1210:
idstr = "88E6123";
/* ports 2,3,4 not available */
swconfig->ports_enabled &= 0x023;
+ break;
+ default:
+ /* Could not detect switch id */
+ idstr = "88E61??";
+ break;
}
/* Port based VLANs configuration */
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index d48d22b61..db95adaee 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -31,6 +31,11 @@
#include "uec_phy.h"
#include "miiphy.h"
+/* Default UTBIPAR SMI address */
+#ifndef CONFIG_UTBIPAR_INIT_TBIPA
+#define CONFIG_UTBIPAR_INIT_TBIPA 0x1F
+#endif
+
static uec_info_t uec_info[] = {
#ifdef CONFIG_UEC_ETH1
STD_UEC_INFO(1), /* UEC1 */
@@ -1071,15 +1076,11 @@ static int uec_startup(uec_private_t *uec)
utbipar = in_be32(&uec_regs->utbipar);
utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK;
enet_interface = uec->uec_info->enet_interface;
- if (enet_interface == ENET_1000_TBI ||
- enet_interface == ENET_1000_RTBI) {
- utbipar |= (uec_info->phy_address + uec_info->uf_info.ucc_num)
- << UTBIPAR_PHY_ADDRESS_SHIFT;
- } else {
- utbipar |= (0x10 + uec_info->uf_info.ucc_num)
- << UTBIPAR_PHY_ADDRESS_SHIFT;
- }
+ /* Initialize UTBIPAR address to CONFIG_UTBIPAR_INIT_TBIPA for ALL UEC.
+ * This frees up the remaining SMI addresses for use.
+ */
+ utbipar |= CONFIG_UTBIPAR_INIT_TBIPA << UTBIPAR_PHY_ADDRESS_SHIFT;
out_be32(&uec_regs->utbipar, utbipar);
/* Configure the TBI for SGMII operation */
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index d613f3e4c..aa4eb5e38 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -51,27 +51,28 @@
*--------------------------------------------------------------------*/
/*
- * Some boards do not have a PHY for each ethernet port. These ports
- * are known as Fixed PHY (or PHY-less) ports. For such ports, set
- * the appropriate CONFIG_PHY_ADDR equal to CONFIG_FIXED_PHY and
- * then define CONFIG_SYS_FIXED_PHY_PORTS to define what the speed and
- * duplex should be for these ports in the board configuration
- * file.
+ * Some boards do not have a PHY for each ethernet port. These ports are known
+ * as Fixed PHY (or PHY-less) ports. For such ports, set the appropriate
+ * CONFIG_SYS_UECx_PHY_ADDR equal to CONFIG_FIXED_PHY_ADDR (an unused address)
+ * When the drver tries to identify the PHYs, CONFIG_FIXED_PHY will be returned
+ * and the driver will search CONFIG_SYS_FIXED_PHY_PORTS to find what network
+ * speed and duplex should be for the port.
*
- * For Example:
+ * Example board header configuration file:
* #define CONFIG_FIXED_PHY 0xFFFFFFFF
+ * #define CONFIG_SYS_FIXED_PHY_ADDR 0x1E (pick an unused phy address)
*
- * #define CONFIG_PHY_ADDR CONFIG_FIXED_PHY
- * #define CONFIG_PHY1_ADDR 1
- * #define CONFIG_PHY2_ADDR CONFIG_FIXED_PHY
- * #define CONFIG_PHY3_ADDR 3
+ * #define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
+ * #define CONFIG_SYS_UEC2_PHY_ADDR 0x02
+ * #define CONFIG_SYS_UEC3_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
+ * #define CONFIG_SYS_UEC4_PHY_ADDR 0x04
*
- * #define CONFIG_SYS_FIXED_PHY_PORT(devnum,speed,duplex) \
- * {devnum, speed, duplex},
+ * #define CONFIG_SYS_FIXED_PHY_PORT(name,speed,duplex) \
+ * {name, speed, duplex},
*
* #define CONFIG_SYS_FIXED_PHY_PORTS \
- * CONFIG_SYS_FIXED_PHY_PORT(0,SPEED_100,DUPLEX_FULL) \
- * CONFIG_SYS_FIXED_PHY_PORT(2,SPEED_100,DUPLEX_HALF)
+ * CONFIG_SYS_FIXED_PHY_PORT("FSL UEC0",SPEED_100,DUPLEX_FULL) \
+ * CONFIG_SYS_FIXED_PHY_PORT("FSL UEC2",SPEED_100,DUPLEX_HALF)
*/
#ifndef CONFIG_FIXED_PHY
@@ -83,7 +84,7 @@
#endif
struct fixed_phy_port {
- unsigned int devnum; /* ethernet port */
+ char name[NAMESIZE]; /* ethernet port name */
unsigned int speed; /* specified speed 10,100 or 1000 */
unsigned int duplex; /* specified duplex FULL or HALF */
};
@@ -592,7 +593,8 @@ static int fixed_phy_read_status (struct uec_mii_info *mii_info)
int i = 0;
for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) {
- if (mii_info->mii_id == fixed_phy_port[i].devnum) {
+ if (strncmp(mii_info->dev->name, fixed_phy_port[i].name,
+ strlen(mii_info->dev->name)) == 0) {
mii_info->speed = fixed_phy_port[i].speed;
mii_info->duplex = fixed_phy_port[i].duplex;
mii_info->link = 1; /* Link is always UP */
diff --git a/include/netdev.h b/include/netdev.h
index 3e66586b4..50329a3f5 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -51,6 +51,7 @@ int eepro100_initialize(bd_t *bis);
int eth_3com_initialize (bd_t * bis);
int fec_initialize (bd_t *bis);
int fecmxc_initialize (bd_t *bis);
+int ftmac100_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
int inca_switch_initialize(bd_t *bis);
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-26 11:53:30 +0000