diff options
33 files changed, 2906 insertions, 395 deletions
@@ -1,3 +1,98 @@ +commit e1893815b0999410d7a327589611c7b38e95299e +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Oct 12 15:49:39 2007 +0200 + + GP3 SSA: enable RTC + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 8002012041f1ff9f997a5727abe5015f70cd2e46 +Author: Grzegorz Bernacki <gjb@semihalf.com> +Date: Tue Oct 9 13:58:24 2007 +0200 + + [ads5121] EEPROM support added. + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + +commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Oct 5 10:40:54 2007 +0200 + + tqm5200: Fix CONFIG_CMD_PCI typo in board config file. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 92869195ef8210758d2176230c0a36897afd50ed +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Oct 5 09:46:06 2007 +0200 + + CM5200: Fix missing null-termination in hostname manipulation code + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 738815c0cc44aa329097f868dc1efc49ede9c5ba +Author: Stefan Roese <sr@denx.de> +Date: Tue Oct 2 11:44:46 2007 +0200 + + ppc4xx: Coding style cleanup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 87c1833a39e944db66385286fd5e28f9b3fcdd50 +Author: Stefan Roese <sr@denx.de> +Date: Tue Oct 2 11:44:19 2007 +0200 + + ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670 +Author: Grzegorz Bernacki <gjb@semihalf.com> +Date: Mon Oct 1 09:51:50 2007 +0200 + + Program EPLD to force full duplex mode for PHY. + + EPLD forces modes of PHY operation. By default full duplex is turned off. + This fix turns it on. + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + +commit 86ec86c04326c3913178a7679aa910de071da75d +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Thu Sep 27 23:27:47 2007 +0200 + + Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 3e954beb614b5b190d7f4f4c3b641437a0132e35 +Author: Stefan Roese <sr@denx.de> +Date: Tue Sep 11 14:12:55 2007 +0200 + + ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test) + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Sep 25 15:48:05 2007 -0600 + + Fpga: fix incorrect test of CFG_FPGA_XILINX macro + + CFG_FPGA_XILINX is a bit value used to test against the value in + CONFIG_FPGA. Testing for a value will always return TRUE. I don't + think that is the intention in this code. + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 66dcad3a9a53e0766d90e0084123bd8529522fb0 +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Sep 20 00:04:14 2007 +0200 + + v1.3.0-rc2 + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 135e19bc2773ebca487e9a8371f67e1ba202313a Author: Wolfgang Denk <wd@denx.de> Date: Tue Sep 18 21:36:35 2007 +0200 @@ -38,6 +133,21 @@ Date: Tue Sep 18 17:40:27 2007 +0200 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit bd86220f58b99d6896198c385fda132f0c980915 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Tue Sep 18 13:07:54 2007 +0100 + + Move coloured led API to status_led.h + Improve indentation in drivers/at45.c + +commit 97213f32416ead885deafea86774e912ffd60ad0 +Author: David Saada <David.Saada@ecitele.com> +Date: Mon Sep 17 17:04:47 2007 +0200 + + Description: Add NEC's PCI OHCI module ID to the USB OHCI driver + + Signed-off-by: David Saada <david.saada@ecitele.com> + commit 67c31036acaaaa992fc346cc89db0909a7e733c4 Author: Wolfgang Denk <wd@denx.de> Date: Sun Sep 16 17:10:04 2007 +0200 @@ -193,6 +303,18 @@ Date: Thu Sep 13 18:21:48 2007 +0200 Signed-off-by: Marian Balakowicz <m8@semihalf.com> +commit e1f601b572db5de9aa81a0b77c68a86994fe24c4 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Sep 13 16:33:59 2007 +0200 + + tqm5200: Restore customary env. variable boot commands for powerpc kernels + + - update default definitions of kernel_addr and fdt_addr env. variables + - make arch/powerpc booting the default scenario + - update MTD partition layout to match the above + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + commit f34024d4a328e6edd906456da98d2c537155c4f7 Author: Wolfgang Denk <wd@denx.de> Date: Wed Sep 12 00:48:57 2007 +0200 @@ -201,6 +323,12 @@ Date: Wed Sep 12 00:48:57 2007 +0200 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc +Author: Peter Pearse <peter.pearse@arm.com> +Date: Tue Sep 11 15:35:01 2007 +0100 + + Final tidy + commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e Author: Grzegorz Bernacki <gjb@semihalf.com> Date: Tue Sep 11 15:42:11 2007 +0200 @@ -507,6 +635,14 @@ Date: Thu Sep 6 09:46:17 2007 -0600 Signed-off-by: Grant Likely <grant.likely@secretlab.ca> +commit 80767a6cead9990d9e77e62be947843c2c72f469 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Wed Sep 5 16:04:41 2007 +0100 + + Changed API name to coloured_led.h + Removed code using deprecated ifdef CONFIG_BOOTBINFUNC + Tidied other cpu/arm920t/start.S code + commit 56a9270521baaa00e12639a978302a67f61ef060 Author: Kumar Gala <galak@kernel.crashing.org> Date: Thu Aug 30 16:18:18 2007 -0500 @@ -532,6 +668,31 @@ Date: Thu Aug 30 01:58:48 2007 -0500 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> +commit 9f5c3d3720e777a572dcdc8af2008b44c7243885 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Tue Sep 4 16:18:38 2007 +0100 + + Add coloured led interface for ARM boards. + Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered. + +commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb +Author: Peter Pearse <peter.pearse@arm.com> +Date: Tue Sep 4 14:49:28 2007 +0100 + + Move include/led.h to board/at91rm9200dk + +commit 6e4bf9b24e57c15abc6542e685d06380bc64af27 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Tue Sep 4 14:25:51 2007 +0100 + + Ran Lindent on drivers/at45.c + +commit 557ab89d294f08dd532f21d19861b40093200a33 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Tue Sep 4 14:23:50 2007 +0100 + + Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX + commit 81b73dec16fd1227369a191e725e10044a9d56b8 Author: Gary Jennejohn <garyj@denx.de> Date: Fri Aug 31 15:21:46 2007 +0200 @@ -607,6 +768,20 @@ Date: Wed Aug 29 18:26:24 2007 -0600 Signed-off-by: Grant Likely <grant.likely@secretlab.ca> +commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143 +Author: Stefan Roese <sr@denx.de> +Date: Wed Aug 29 16:31:18 2007 +0200 + + ppc4xx: Change lwmon5 default environment to support Linux RTC + + The Linux PCF8563 RTC driver doesn't do autoprobing, so we need + to supply the RTC I2C address as bootline parameter. This patch + adds support for this rtc probing parameter to the bootargs: + + "rtc-pcf8563.probe=0,0x51" + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 2602a5c40ae37ab965a4e240854fdaffb51328a4 Author: Kim Phillips <kim.phillips@freescale.com> Date: Wed Aug 29 09:06:05 2007 -0500 @@ -211,6 +211,7 @@ LIBS += drivers/libdrivers.a LIBS += drivers/bios_emulator/libatibiosemu.a LIBS += drivers/nand/libnand.a LIBS += drivers/nand_legacy/libnand_legacy.a +LIBS += drivers/onenand/libonenand.a LIBS += drivers/net/libnet.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a diff --git a/board/at91rm9200dk/led.c b/board/at91rm9200dk/led.c index 051891883..47a3bfce6 100644 --- a/board/at91rm9200dk/led.c +++ b/board/at91rm9200dk/led.c @@ -66,7 +66,7 @@ void red_LED_off(void) } -void LED_init (void) +void coloured_LED_init (void) { AT91PS_PIO PIOB = AT91C_BASE_PIOB; AT91PS_PMC PMC = AT91C_BASE_PMC; diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c index b74ac08bc..e2ab5b8e2 100644 --- a/board/cm5200/cm5200.c +++ b/board/cm5200/cm5200.c @@ -397,6 +397,7 @@ int misc_init_r(void) "operational\n"); /* set the hostname appropriate to the module we're running on */ + hostname[0] = 0x00; compose_hostname(hw_id, hostname); setenv("hostname", hostname); diff --git a/common/Makefile b/common/Makefile index ef7d09707..fde5ad903 100644 --- a/common/Makefile +++ b/common/Makefile @@ -37,13 +37,14 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o cmd_autoscript.o \ cmd_load.o cmd_log.o \ cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \ cmd_nand.o cmd_net.o cmd_nvedit.o \ + cmd_onenand.o \ cmd_pci.o cmd_pcmcia.o cmd_portio.o \ cmd_reginfo.o cmd_reiser.o cmd_sata.o cmd_scsi.o cmd_spi.o \ cmd_universe.o cmd_usb.o cmd_vfd.o \ command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \ environment.o env_common.o \ env_nand.o env_dataflash.o env_flash.o env_eeprom.o \ - env_nvram.o env_nowhere.o \ + env_onenand.o env_nvram.o env_nowhere.o \ exports.o \ fdt_support.o flash.o fpga.o ft_build.o \ hush.o kgdb.o lcd.o lists.o lynxkdi.o \ diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c index 8d4c1a38d..9d1d87551 100644 --- a/common/cmd_mfsl.c +++ b/common/cmd_mfsl.c @@ -355,19 +355,18 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) unsigned int reg = 0; unsigned int val = 0; - reg = (unsigned int)simple_strtoul (argv[1], NULL, 16); - val = (unsigned int)simple_strtoul (argv[2], NULL, 16); - if (argc < 1) { + if (argc < 2) { printf ("Usage:\n%s\n", cmdtp->usage); return 1; } + reg = (unsigned int)simple_strtoul (argv[1], NULL, 16); + val = (unsigned int)simple_strtoul (argv[2], NULL, 16); switch (reg) { case 0x1: if (argc > 2) { MTS (val, rmsr); NOP; MFS (val, rmsr); - } else { MFS (val, rmsr); } @@ -382,6 +381,7 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) puts ("ESR"); break; default: + puts ("Unsupported register\n"); return 1; } printf (": 0x%08lx\n", val); @@ -408,10 +408,10 @@ U_BOOT_CMD (fwr, 4, 1, do_fwr, " 3 - blocking control write\n"); U_BOOT_CMD (rspr, 3, 1, do_rspr, - "rmsr - read/write special purpose register\n", + "rspr - read/write special purpose register\n", "- reg_num [write value] read/write special purpose register\n" - " 0 - MSR - Machine status register\n" - " 1 - EAR - Exception address register\n" - " 2 - ESR - Exception status register\n"); + " 1 - MSR - Machine status register\n" + " 3 - EAR - Exception address register\n" + " 5 - ESR - Exception status register\n"); #endif diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 1db0fc3c0..677040881 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -57,8 +57,9 @@ DECLARE_GLOBAL_DATA_PTR; !defined(CFG_ENV_IS_IN_FLASH) && \ !defined(CFG_ENV_IS_IN_DATAFLASH) && \ !defined(CFG_ENV_IS_IN_NAND) && \ + !defined(CFG_ENV_IS_IN_ONENAND) && \ !defined(CFG_ENV_IS_NOWHERE) -# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|NOWHERE} +# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|ONENAND|NOWHERE} #endif #define XMK_STR(x) #x @@ -553,7 +554,8 @@ int getenv_r (char *name, char *buf, unsigned len) #if defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \ || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \ - || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) + || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \ + || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND)) int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { extern char * env_name_spec; @@ -608,7 +610,8 @@ U_BOOT_CMD( #if defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \ || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \ - || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) + || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \ + || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND)) U_BOOT_CMD( saveenv, 1, 0, do_saveenv, "saveenv - save environment variables to persistent storage\n", diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c new file mode 100644 index 000000000..dcda099c8 --- /dev/null +++ b/common/cmd_onenand.c @@ -0,0 +1,155 @@ +/* + * U-Boot command for OneNAND support + * + * Copyright (C) 2005-2007 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <common.h> +#include <command.h> + +#ifdef CONFIG_CMD_ONENAND + +#include <linux/mtd/compat.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> + +#include <asm/io.h> + +extern struct mtd_info onenand_mtd; +extern struct onenand_chip onenand_chip; + +int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int ret = 0; + + switch (argc) { + case 0: + case 1: + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + + case 2: + if (strncmp(argv[1], "open", 4) == 0) { + onenand_init(); + return 0; + } + onenand_print_device_info(onenand_chip.device_id, 1); + return 0; + + default: + /* At least 4 args */ + if (strncmp(argv[1], "erase", 5) == 0) { + struct erase_info instr; + ulong start, end; + ulong block; + + start = simple_strtoul(argv[2], NULL, 10); + end = simple_strtoul(argv[3], NULL, 10); + start -= (unsigned long)onenand_chip.base; + end -= (unsigned long)onenand_chip.base; + + if (!end || end < 0) + end = start; + + printf("Erase block from %d to %d\n", start, end); + + for (block = start; block <= end; block++) { + instr.addr = block << onenand_chip.erase_shift; + instr.len = 1 << onenand_chip.erase_shift; + ret = onenand_erase(&onenand_mtd, &instr); + if (ret) { + printf("erase failed %d\n", block); + break; + } + } + + return 0; + } + + if (strncmp(argv[1], "read", 4) == 0) { + ulong addr = simple_strtoul(argv[2], NULL, 16); + ulong ofs = simple_strtoul(argv[3], NULL, 16); + size_t len = simple_strtoul(argv[4], NULL, 16); + size_t retlen = 0; + int oob = strncmp(argv[1], "read.oob", 8) ? 0 : 1; + + ofs -= (unsigned long)onenand_chip.base; + + if (oob) + onenand_read_oob(&onenand_mtd, ofs, len, + &retlen, (u_char *) addr); + else + onenand_read(&onenand_mtd, ofs, len, &retlen, + (u_char *) addr); + printf("Done\n"); + + return 0; + } + + if (strncmp(argv[1], "write", 5) == 0) { + ulong addr = simple_strtoul(argv[2], NULL, 16); + ulong ofs = simple_strtoul(argv[3], NULL, 16); + size_t len = simple_strtoul(argv[4], NULL, 16); + size_t retlen = 0; + + ofs -= (unsigned long)onenand_chip.base; + + onenand_write(&onenand_mtd, ofs, len, &retlen, + (u_char *) addr); + printf("Done\n"); + + return 0; + } + + if (strncmp(argv[1], "block", 5) == 0) { + ulong addr = simple_strtoul(argv[2], NULL, 16); + ulong block = simple_strtoul(argv[3], NULL, 10); + ulong page = simple_strtoul(argv[4], NULL, 10); + size_t len = simple_strtol(argv[5], NULL, 10); + size_t retlen = 0; + ulong ofs; + int oob = strncmp(argv[1], "block.oob", 9) ? 0 : 1; + + ofs = block << onenand_chip.erase_shift; + if (page) + ofs += page << onenand_chip.page_shift; + + if (!len) { + if (oob) + len = 64; + else + len = 512; + } + + if (oob) + onenand_read_oob(&onenand_mtd, ofs, len, + &retlen, (u_char *) addr); + else + onenand_read(&onenand_mtd, ofs, len, &retlen, + (u_char *) addr); + return 0; + } + + break; + } + + return 0; +} + +U_BOOT_CMD( + onenand, 6, 1, do_onenand, + "onenand - OneNAND sub-system\n", + "info - show available OneNAND devices\n" + "onenand read[.oob] addr ofs len - read data at ofs with len to addr\n" + "onenand write addr ofs len - write data at ofs with len from addr\n" + "onenand erase saddr eaddr - erase block start addr to end addr\n" + "onenand block[.oob] addr block [page] [len] - " + "read data with (block [, page]) to addr" +); + +#endif /* CONFIG_CMD_ONENAND */ diff --git a/common/env_onenand.c b/common/env_onenand.c new file mode 100644 index 000000000..66107f91f --- /dev/null +++ b/common/env_onenand.c @@ -0,0 +1,134 @@ +/* + * (C) Copyright 2005-2007 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if defined(CFG_ENV_IS_IN_ONENAND) /* Environment is in OneNAND */ + +#include <command.h> +#include <environment.h> +#include <linux/stddef.h> +#include <malloc.h> + +#include <linux/mtd/compat.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> + +extern struct mtd_info onenand_mtd; +extern struct onenand_chip onenand_chip; + +/* References to names in env_common.c */ +extern uchar default_environment[]; + +#define ONENAND_ENV_SIZE(mtd) (mtd.oobblock - ENV_HEADER_SIZE) + +char *env_name_spec = "OneNAND"; + +#ifdef ENV_IS_EMBEDDED +extern uchar environment[]; +env_t *env_ptr = (env_t *) (&environment[0]); +#else /* ! ENV_IS_EMBEDDED */ +static unsigned char onenand_env[MAX_ONENAND_PAGESIZE]; +env_t *env_ptr = (env_t *) onenand_env; +#endif /* ENV_IS_EMBEDDED */ + +uchar env_get_char_spec(int index) +{ + DECLARE_GLOBAL_DATA_PTR; + + return (*((uchar *) (gd->env_addr + index))); +} + +void env_relocate_spec(void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned long env_addr; + int use_default = 0; + int retlen; + + env_addr = CFG_ENV_ADDR; + env_addr -= (unsigned long)onenand_chip.base; + + /* Check OneNAND exist */ + if (onenand_mtd.oobblock) + /* Ignore read fail */ + onenand_read(&onenand_mtd, env_addr, onenand_mtd.oobblock, + &retlen, (u_char *) env_ptr); + else + onenand_mtd.oobblock = MAX_ONENAND_PAGESIZE; + + if (crc32(0, env_ptr->data, ONENAND_ENV_SIZE(onenand_mtd)) != + env_ptr->crc) + use_default = 1; + + if (use_default) { + memcpy(env_ptr->data, default_environment, + ONENAND_ENV_SIZE(onenand_mtd)); + env_ptr->crc = + crc32(0, env_ptr->data, ONENAND_ENV_SIZE(onenand_mtd)); + } + + gd->env_addr = (ulong) & env_ptr->data; + gd->env_valid = 1; +} + +int saveenv(void) +{ + unsigned long env_addr = CFG_ENV_ADDR; + struct erase_info instr; + int retlen; + + instr.len = CFG_ENV_SIZE; + instr.addr = env_addr; + instr.addr -= (unsigned long)onenand_chip.base; + if (onenand_erase(&onenand_mtd, &instr)) { + printf("OneNAND: erase failed at 0x%08x\n", env_addr); + return 1; + } + + /* update crc */ + env_ptr->crc = + crc32(0, env_ptr->data, onenand_mtd.oobblock - ENV_HEADER_SIZE); + + env_addr -= (unsigned long)onenand_chip.base; + if (onenand_write(&onenand_mtd, env_addr, onenand_mtd.oobblock, &retlen, + (u_char *) env_ptr)) { + printf("OneNAND: write failed at 0x%08x\n", instr.addr); + return 2; + } + + return 0; +} + +int env_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* use default */ + gd->env_addr = (ulong) & default_environment[0]; + gd->env_valid = 1; + + return 0; +} + +#endif /* CFG_ENV_IS_IN_ONENAND */ diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S index b9c364bc6..aefcdd155 100644 --- a/cpu/arm920t/start.S +++ b/cpu/arm920t/start.S @@ -27,9 +27,7 @@ #include <config.h> #include <version.h> -#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF) -#include <led.h> -#endif +#include <status_led.h> /* ************************************************************************* @@ -41,7 +39,7 @@ .globl _start -_start: b reset +_start: b start_code ldr pc, _undefined_instruction ldr pc, _software_interrupt ldr pc, _prefetch_abort @@ -64,7 +62,7 @@ _fiq: .word fiq /* ************************************************************************* * - * Startup Code (reset vector) + * Startup Code (called from the ARM reset exception vector) * * do important init only if we don't start from memory! * relocate armboot to ram @@ -106,10 +104,10 @@ FIQ_STACK_START: /* - * the actual reset code + * the actual start code */ -reset: +start_code: /* * set the cpu to SVC32 mode */ @@ -118,58 +116,12 @@ reset: orr r0,r0,#0xd3 msr cpsr,r0 -#if CONFIG_AT91RM9200 -#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF) - bl LED_init + bl coloured_LED_init bl red_LED_on -#endif -#ifdef CONFIG_BOOTBINFUNC -/* code based on entry.S from ATMEL */ -#define AT91C_BASE_CKGR 0xFFFFFC20 -#define CKGR_MOR 0 - /* Get the CKGR Base Address */ - ldr r1, =AT91C_BASE_CKGR - -/* Main oscillator Enable register APMC_MOR : Enable main oscillator , OSCOUNT = 0xFF */ -/* ldr r0, = AT91C_CKGR_MOSCEN:OR:AT91C_CKGR_OSCOUNT */ - ldr r0, =0x0000FF01 - str r0, [r1, #CKGR_MOR] - /* Add loop to compensate Main Oscillator startup time */ - ldr r0, =0x00000010 -LoopOsc: - subs r0, r0, #1 - bhi LoopOsc - /* scratch stack */ - ldr r1, =0x00204000 - /* Insure word alignment */ - bic r1, r1, #3 - /* Init stack SYS */ - mov sp, r1 - /* - * This does a lot more than just set up the memory, which - * is why it's called lowlevelinit - */ - bl lowlevelinit /* in memsetup.S */ - bl icache_enable; - /* ------------------------------------ - * Read/modify/write CP15 control register - * ------------------------------------- - * read cp15 control register (cp15 r1) in r0 - * ------------------------------------ - */ - mrc p15, 0, r0, c1, c0, 0 - /* Reset bit :Little Endian end fast bus mode */ - ldr r3, =0xC0000080 - /* Set bit :Asynchronous clock mode, Not Fast Bus */ - ldr r4, =0xC0000000 - bic r0, r0, r3 - orr r0, r0, r4 - /* write r0 in cp15 control register (cp15 r1) */ - mcr p15, 0, r0, c1, c0, 0 -#endif /* CONFIG_BOOTBINFUNC */ +#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF) /* - * relocate exeception table + * relocate exception table */ ldr r0, =_start ldr r1, =0x0 @@ -181,19 +133,20 @@ copyex: bne copyex #endif -/* turn off the watchdog */ -#if defined(CONFIG_S3C2400) -# define pWTCON 0x15300000 -# define INTMSK 0x14400008 /* Interupt-Controller base addresses */ -# define CLKDIVN 0x14800014 /* clock divisor register */ -#elif defined(CONFIG_S3C2410) -# define pWTCON 0x53000000 -# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ -# define INTSUBMSK 0x4A00001C -# define CLKDIVN 0x4C000014 /* clock divisor register */ -#endif - #if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) + /* turn off the watchdog */ + +# if defined(CONFIG_S3C2400) +# define pWTCON 0x15300000 +# define INTMSK 0x14400008 /* Interupt-Controller base addresses */ +# define CLKDIVN 0x14800014 /* clock divisor register */ +#else +# define pWTCON 0x53000000 +# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ +# define INTSUBMSK 0x4A00001C +# define CLKDIVN 0x4C000014 /* clock divisor register */ +# endif + ldr r0, =pWTCON mov r1, #0x0 str r1, [r0] @@ -226,25 +179,7 @@ copyex: #endif #ifdef CONFIG_AT91RM9200 -#ifdef CONFIG_BOOTBINFUNC -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end addreee [r2] */ - ble copy_loop -#endif /* CONFIG_BOOTBINFUNC */ -#else #ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ @@ -284,27 +219,6 @@ clbss_l:str r2, [r0] /* clear loop... */ cmp r0, r1 ble clbss_l -#if 0 - /* try doing this stuff after the relocation */ - ldr r0, =pWTCON - mov r1, #0x0 - str r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTMR - default - */ - mov r1, #0xffffffff - ldr r0, =INTMR - str r1, [r0] - - /* FCLK:HCLK:PCLK = 1:2:4 */ - /* default FCLK is 120 MHz ! */ - ldr r0, =CLKDIVN - mov r1, #3 - str r1, [r0] - /* END stuff after relocation */ -#endif - ldr pc, _start_armboot _start_armboot: .word start_armboot diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c index 6ce0b55b2..4b7866fae 100644 --- a/cpu/microblaze/cache.c +++ b/cpu/microblaze/cache.c @@ -1,7 +1,7 @@ /* * (C) Copyright 2007 Michal Simek * - * Michal SIMEK <moonstr@monstr.eu> + * Michal SIMEK <monstr@monstr.eu> * * See file CREDITS for list of people who contributed to this * project. diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S index 3c027ff9b..8740284ad 100644 --- a/cpu/microblaze/start.S +++ b/cpu/microblaze/start.S @@ -33,15 +33,13 @@ _start: addi r1, r0, CFG_INIT_SP_OFFSET addi r1, r1, -4 /* Decrement SP to top of memory */ /* add opcode instruction for 32bit jump - 2 instruction imm & brai*/ - addi r6, r0, 0xb000 /* hex b000 opcode imm */ - bslli r6, r6, 16 /* shift */ + addi r6, r0, 0xb0000000 /* hex b000 opcode imm */ swi r6, r0, 0x0 /* reset address */ swi r6, r0, 0x8 /* user vector exception */ swi r6, r0, 0x10 /* interrupt */ swi r6, r0, 0x20 /* hardware exception */ - addi r6, r0, 0xb808 /* hew b808 opcode brai*/ - bslli r6, r6, 16 + addi r6, r0, 0xb8080000 /* hew b808 opcode brai*/ swi r6, r0, 0x4 /* reset address */ swi r6, r0, 0xC /* user vector exception */ swi r6, r0, 0x14 /* interrupt */ diff --git a/cpu/microblaze/timer.c b/cpu/microblaze/timer.c index ab1cb1274..b35045344 100644 --- a/cpu/microblaze/timer.c +++ b/cpu/microblaze/timer.c @@ -33,10 +33,17 @@ void reset_timer (void) timestamp = 0; } +#ifdef CFG_TIMER_0 ulong get_timer (ulong base) { return (timestamp - base); } +#else +ulong get_timer (ulong base) +{ + return (timestamp++ - base); +} +#endif void set_timer (ulong t) { diff --git a/drivers/at45.c b/drivers/at45.c index 507ff36d4..dac987a43 100755..100644 --- a/drivers/at45.c +++ b/drivers/at45.c @@ -27,33 +27,31 @@ /* * spi.c API */ -extern unsigned int AT91F_SpiWrite (AT91PS_DataflashDesc pDesc); -extern void AT91F_SpiEnable(int cs); +extern unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc); +extern void AT91F_SpiEnable(int cs); #define AT91C_TIMEOUT_WRDY 200000 - /*----------------------------------------------------------------------*/ /* \fn AT91F_DataFlashSendCommand */ /* \brief Generic function to send a command to the dataflash */ /*----------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashSendCommand( - AT91PS_DataFlash pDataFlash, - unsigned char OpCode, - unsigned int CmdSize, - unsigned int DataflashAddress) +AT91S_DataFlashStatus AT91F_DataFlashSendCommand(AT91PS_DataFlash pDataFlash, + unsigned char OpCode, + unsigned int CmdSize, + unsigned int DataflashAddress) { unsigned int adr; - if ( (pDataFlash->pDataFlashDesc->state) != IDLE) + if ((pDataFlash->pDataFlashDesc->state) != IDLE) return DATAFLASH_BUSY; /* process the address to obtain page address and byte address */ adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) << - pDataFlash->pDevice->page_offset) + (DataflashAddress % - (pDataFlash->pDevice->pages_size)); + pDataFlash->pDevice->page_offset) + + (DataflashAddress % (pDataFlash->pDevice->pages_size)); - /* fill the command buffer */ + /* fill the command buffer */ pDataFlash->pDataFlashDesc->command[0] = OpCode; if (pDataFlash->pDevice->pages_number >= 16384) { pDataFlash->pDataFlashDesc->command[1] = @@ -78,16 +76,16 @@ AT91S_DataFlashStatus AT91F_DataFlashSendCommand( pDataFlash->pDataFlashDesc->command[7] = 0; /* Initialize the SpiData structure for the spi write fuction */ - pDataFlash->pDataFlashDesc->tx_cmd_pt = + pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command; - pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize; - pDataFlash->pDataFlashDesc->rx_cmd_pt = + pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize; + pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command; - pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize; + pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize; /* send the command and read the data */ - return AT91F_SpiWrite (pDataFlash->pDataFlashDesc); } - + return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); +} /*----------------------------------------------------------------------*/ /* \fn AT91F_DataFlashGetStatus */ @@ -98,50 +96,49 @@ AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc) AT91S_DataFlashStatus status; /* if a transfert is in progress ==> return 0 */ - if( (pDesc->state) != IDLE) + if ((pDesc->state) != IDLE) return DATAFLASH_BUSY; /* first send the read status command (D7H) */ pDesc->command[0] = DB_STATUS; pDesc->command[1] = 0; - pDesc->DataFlash_state = GET_STATUS; - pDesc->tx_data_size = 0; /* Transmit the command */ - /* and receive response */ - pDesc->tx_cmd_pt = pDesc->command; - pDesc->rx_cmd_pt = pDesc->command; - pDesc->rx_cmd_size = 2; - pDesc->tx_cmd_size = 2; - status = AT91F_SpiWrite (pDesc); + pDesc->DataFlash_state = GET_STATUS; + pDesc->tx_data_size = 0; /* Transmit the command */ + /* and receive response */ + pDesc->tx_cmd_pt = pDesc->command; + pDesc->rx_cmd_pt = pDesc->command; + pDesc->rx_cmd_size = 2; + pDesc->tx_cmd_size = 2; + status = AT91F_SpiWrite(pDesc); - pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1); + pDesc->DataFlash_state = *((unsigned char *)(pDesc->rx_cmd_pt) + 1); return status; } - /*----------------------------------------------------------------------*/ /* \fn AT91F_DataFlashWaitReady */ /* \brief wait for dataflash ready (bit7 of the status register == 1) */ /*----------------------------------------------------------------------*/ AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc -pDataFlashDesc, unsigned int timeout) + pDataFlashDesc, + unsigned int timeout) { pDataFlashDesc->DataFlash_state = IDLE; do { AT91F_DataFlashGetStatus(pDataFlashDesc); timeout--; - } while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && - (timeout > 0) ); + } while (((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && + (timeout > 0)); - if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) + if ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) return DATAFLASH_ERROR; return DATAFLASH_OK; } - /*--------------------------------------------------------------------------*/ /* Function Name : AT91F_DataFlashContinuousRead */ /* Object : Continuous stream Read */ @@ -151,17 +148,17 @@ pDataFlashDesc, unsigned int timeout) /* : <sizeToRead> = data buffer size */ /* Return value : State of the dataflash */ /*--------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashContinuousRead ( - AT91PS_DataFlash pDataFlash, - int src, - unsigned char *dataBuffer, - int sizeToRead ) +AT91S_DataFlashStatus AT91F_DataFlashContinuousRead( + AT91PS_DataFlash pDataFlash, + int src, + unsigned char *dataBuffer, + int sizeToRead) { AT91S_DataFlashStatus status; /* Test the size to read in the device */ - if ( (src + sizeToRead) > - (pDataFlash->pDevice->pages_size * - (pDataFlash->pDevice->pages_number))) + if ((src + sizeToRead) > + (pDataFlash->pDevice->pages_size * + (pDataFlash->pDevice->pages_number))) return DATAFLASH_MEMORY_OVERFLOW; pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; @@ -169,13 +166,12 @@ AT91S_DataFlashStatus AT91F_DataFlashContinuousRead ( pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead; - status = AT91F_DataFlashSendCommand - (pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src); + status = AT91F_DataFlashSendCommand( + pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src); /* Send the command to the dataflash */ - return(status); + return (status); } - /*---------------------------------------------------------------------------*/ /* Function Name : AT91F_DataFlashPagePgmBuf */ /* Object : Main memory page program thru buffer 1 or buffer 2 */ @@ -185,11 +181,10 @@ AT91S_DataFlashStatus AT91F_DataFlashContinuousRead ( /* : <SizeToWrite> = data buffer size */ /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - unsigned int dest, - unsigned int SizeToWrite) +AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(AT91PS_DataFlash pDataFlash, + unsigned char *src, + unsigned int dest, + unsigned int SizeToWrite) { int cmdsize; pDataFlash->pDataFlashDesc->tx_data_pt = src; @@ -201,9 +196,9 @@ AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf( /* Send the command to the dataflash */ if (pDataFlash->pDevice->pages_number >= 16384) cmdsize = 5; - return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1, -cmdsize, dest)); } - + return (AT91F_DataFlashSendCommand( + pDataFlash, DB_PAGE_PGM_BUF1, cmdsize, dest)); +} /*---------------------------------------------------------------------------*/ /* Function Name : AT91F_MainMemoryToBufferTransfert */ @@ -214,26 +209,29 @@ cmdsize, dest)); } /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int page) + AT91PS_DataFlash + pDataFlash, + unsigned char + BufferCommand, + unsigned int page) { int cmdsize; /* Test if the buffer command is legal */ - if ((BufferCommand != DB_PAGE_2_BUF1_TRF) - && (BufferCommand != DB_PAGE_2_BUF2_TRF)) + if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && + (BufferCommand != DB_PAGE_2_BUF2_TRF)) { return DATAFLASH_BAD_COMMAND; + } /* no data to transmit or receive */ pDataFlash->pDataFlashDesc->tx_data_size = 0; cmdsize = 4; if (pDataFlash->pDevice->pages_number >= 16384) cmdsize = 5; - return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, -page*pDataFlash->pDevice->pages_size)); + return (AT91F_DataFlashSendCommand( + pDataFlash, BufferCommand, cmdsize, + page * pDataFlash->pDevice->pages_size)); } - /*-------------------------------------------------------------------------- */ /* Function Name : AT91F_DataFlashWriteBuffer */ /* Object : Write data to the internal sram buffer 1 or 2 */ @@ -244,58 +242,61 @@ page*pDataFlash->pDevice->pages_size)); /* : <SizeToWrite> = data buffer size */ /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer ( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned char *dataBuffer, - unsigned int bufferAddress, - int SizeToWrite ) +AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer( + AT91PS_DataFlash pDataFlash, + unsigned char BufferCommand, + unsigned char *dataBuffer, + unsigned int bufferAddress, + int SizeToWrite) { int cmdsize; /* Test if the buffer command is legal */ - if ((BufferCommand != DB_BUF1_WRITE) - && (BufferCommand != DB_BUF2_WRITE)) + if ((BufferCommand != DB_BUF1_WRITE) && + (BufferCommand != DB_BUF2_WRITE)) { return DATAFLASH_BAD_COMMAND; + } /* buffer address must be lower than page size */ if (bufferAddress > pDataFlash->pDevice->pages_size) return DATAFLASH_BAD_ADDRESS; - if ( (pDataFlash->pDataFlashDesc->state) != IDLE) + if ((pDataFlash->pDataFlashDesc->state) != IDLE) return DATAFLASH_BUSY; /* Send first Write Command */ pDataFlash->pDataFlashDesc->command[0] = BufferCommand; pDataFlash->pDataFlashDesc->command[1] = 0; if (pDataFlash->pDevice->pages_number >= 16384) { - pDataFlash->pDataFlashDesc->command[2] = 0; - pDataFlash->pDataFlashDesc->command[3] = + pDataFlash->pDataFlashDesc->command[2] = 0; + pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress & - pDataFlash->pDevice->byte_mask)) >> 8); - pDataFlash->pDataFlashDesc->command[4] = - (unsigned char)((unsigned int)bufferAddress & 0x00FF); + pDataFlash->pDevice-> + byte_mask)) >> 8); + pDataFlash->pDataFlashDesc->command[4] = + (unsigned char)((unsigned int)bufferAddress & 0x00FF); cmdsize = 5; } else { - pDataFlash->pDataFlashDesc->command[2] = + pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress & - pDataFlash->pDevice->byte_mask)) >> 8); - pDataFlash->pDataFlashDesc->command[3] = - (unsigned char)((unsigned int)bufferAddress & 0x00FF); - pDataFlash->pDataFlashDesc->command[4] = 0; + pDataFlash->pDevice-> + byte_mask)) >> 8); + pDataFlash->pDataFlashDesc->command[3] = + (unsigned char)((unsigned int)bufferAddress & 0x00FF); + pDataFlash->pDataFlashDesc->command[4] = 0; cmdsize = 4; } - pDataFlash->pDataFlashDesc->tx_cmd_pt = + pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command; pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize; - pDataFlash->pDataFlashDesc->rx_cmd_pt = + pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command; pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize; - pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; - pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; - pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite; - pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite; + pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; + pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; + pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite; + pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite; return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); } @@ -309,22 +310,22 @@ AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer ( /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ AT91S_DataFlashStatus AT91F_PageErase( - AT91PS_DataFlash pDataFlash, - unsigned int page) + AT91PS_DataFlash pDataFlash, + unsigned int page) { int cmdsize; /* Test if the buffer command is legal */ /* no data to transmit or receive */ - pDataFlash->pDataFlashDesc->tx_data_size = 0; + pDataFlash->pDataFlashDesc->tx_data_size = 0; cmdsize = 4; if (pDataFlash->pDevice->pages_number >= 16384) cmdsize = 5; - return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_ERASE, cmdsize, -page*pDataFlash->pDevice->pages_size)); + return (AT91F_DataFlashSendCommand(pDataFlash, + DB_PAGE_ERASE, cmdsize, + page * pDataFlash->pDevice->pages_size)); } - /*---------------------------------------------------------------------------*/ /* Function Name : AT91F_BlockErase */ /* Object : Erase a Block */ @@ -334,18 +335,19 @@ page*pDataFlash->pDevice->pages_size)); /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ AT91S_DataFlashStatus AT91F_BlockErase( - AT91PS_DataFlash pDataFlash, - unsigned int block) + AT91PS_DataFlash pDataFlash, + unsigned int block) { int cmdsize; /* Test if the buffer command is legal */ /* no data to transmit or receive */ - pDataFlash->pDataFlashDesc->tx_data_size = 0; + pDataFlash->pDataFlashDesc->tx_data_size = 0; cmdsize = 4; if (pDataFlash->pDevice->pages_number >= 16384) cmdsize = 5; - return(AT91F_DataFlashSendCommand (pDataFlash, DB_BLOCK_ERASE,cmdsize, -block*8*pDataFlash->pDevice->pages_size)); + return (AT91F_DataFlashSendCommand(pDataFlash, DB_BLOCK_ERASE, cmdsize, + block * 8 * + pDataFlash->pDevice->pages_size)); } /*---------------------------------------------------------------------------*/ @@ -356,17 +358,16 @@ block*8*pDataFlash->pDevice->pages_size)); /* : <dest> = main memory address */ /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_WriteBufferToMain ( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int dest ) +AT91S_DataFlashStatus AT91F_WriteBufferToMain(AT91PS_DataFlash pDataFlash, + unsigned char BufferCommand, + unsigned int dest) { int cmdsize; /* Test if the buffer command is correct */ if ((BufferCommand != DB_BUF1_PAGE_PGM) && - (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) && - (BufferCommand != DB_BUF2_PAGE_PGM) && - (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) ) + (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) && + (BufferCommand != DB_BUF2_PAGE_PGM) && + (BufferCommand != DB_BUF2_PAGE_ERASE_PGM)) return DATAFLASH_BAD_COMMAND; /* no data to transmit or receive */ @@ -376,9 +377,9 @@ AT91S_DataFlashStatus AT91F_WriteBufferToMain ( if (pDataFlash->pDevice->pages_number >= 16384) cmdsize = 5; /* Send the command to the dataflash */ - return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, - dest)); } - + return (AT91F_DataFlashSendCommand(pDataFlash, BufferCommand, + cmdsize, dest)); +} /*---------------------------------------------------------------------------*/ /* Function Name : AT91F_PartialPageWrite */ @@ -387,11 +388,10 @@ AT91S_DataFlashStatus AT91F_WriteBufferToMain ( /* : <AdrInpage> = adr to begin the fading */ /* : <length> = Number of bytes to erase */ /*---------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_PartialPageWrite ( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - unsigned int dest, - unsigned int size) +AT91S_DataFlashStatus AT91F_PartialPageWrite(AT91PS_DataFlash pDataFlash, + unsigned char *src, + unsigned int dest, + unsigned int size) { unsigned int page; unsigned int AdrInPage; @@ -400,10 +400,9 @@ AT91S_DataFlashStatus AT91F_PartialPageWrite ( AdrInPage = dest % (pDataFlash->pDevice->pages_size); /* Read the contents of the page in the Sram Buffer */ - AT91F_MainMemoryToBufferTransfert(pDataFlash, - DB_PAGE_2_BUF1_TRF, page); + AT91F_MainMemoryToBufferTransfert(pDataFlash, DB_PAGE_2_BUF1_TRF, page); AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); /*Update the SRAM buffer */ AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size); @@ -416,12 +415,13 @@ AT91S_DataFlashStatus AT91F_PartialPageWrite ( AT91F_PageErase(pDataFlash, page); /* Rewrite the modified Sram Buffer in the main memory */ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); } /* Rewrite the modified Sram Buffer in the main memory */ - return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, - (page*pDataFlash->pDevice->pages_size))); + return (AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, + (page * + pDataFlash->pDevice->pages_size))); } /*---------------------------------------------------------------------------*/ @@ -431,11 +431,9 @@ AT91S_DataFlashStatus AT91F_PartialPageWrite ( /* : <dest> = dataflash adress */ /* : <size> = data buffer size */ /*---------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashWrite( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - int dest, - int size ) +AT91S_DataFlashStatus AT91F_DataFlashWrite(AT91PS_DataFlash pDataFlash, + unsigned char *src, + int dest, int size) { unsigned int length; unsigned int page; @@ -443,26 +441,24 @@ AT91S_DataFlashStatus AT91F_DataFlashWrite( AT91F_SpiEnable(pDataFlash->pDevice->cs); - if ( (dest + size) > (pDataFlash->pDevice->pages_size * - (pDataFlash->pDevice->pages_number))) + if ((dest + size) > (pDataFlash->pDevice->pages_size * + (pDataFlash->pDevice->pages_number))) return DATAFLASH_MEMORY_OVERFLOW; /* If destination does not fit a page start address */ - if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0 ) - { - length = pDataFlash->pDevice->pages_size - - (dest % - ((unsigned int) - (pDataFlash->pDevice->pages_size))); + if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0) { + length = + pDataFlash->pDevice->pages_size - + (dest % ((unsigned int)(pDataFlash->pDevice->pages_size))); if (size < length) length = size; - if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length)) + if (!AT91F_PartialPageWrite(pDataFlash, src, dest, length)) return DATAFLASH_ERROR; AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); /* Update size, source and destination pointers */ size -= length; @@ -470,78 +466,77 @@ AT91S_DataFlashStatus AT91F_DataFlashWrite( src += length; } - while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) { + while ((size - pDataFlash->pDevice->pages_size) >= 0) { /* program dataflash page */ page = (unsigned int)dest / (pDataFlash->pDevice->pages_size); status = AT91F_DataFlashWriteBuffer(pDataFlash, - DB_BUF1_WRITE, src, 0, - pDataFlash->pDevice->pages_size); + DB_BUF1_WRITE, src, 0, + pDataFlash->pDevice-> + pages_size); AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); status = AT91F_PageErase(pDataFlash, page); AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); if (!status) return DATAFLASH_ERROR; - status = AT91F_WriteBufferToMain (pDataFlash, - DB_BUF1_PAGE_PGM, dest); - if(!status) + status = AT91F_WriteBufferToMain(pDataFlash, + DB_BUF1_PAGE_PGM, dest); + if (!status) return DATAFLASH_ERROR; AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); /* Update size, source and destination pointers */ size -= pDataFlash->pDevice->pages_size; dest += pDataFlash->pDevice->pages_size; - src += pDataFlash->pDevice->pages_size; + src += pDataFlash->pDevice->pages_size; } /* If still some bytes to read */ - if ( size > 0 ) { + if (size > 0) { /* program dataflash page */ - if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) ) + if (!AT91F_PartialPageWrite(pDataFlash, src, dest, size)) return DATAFLASH_ERROR; AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); } return DATAFLASH_OK; } - /*---------------------------------------------------------------------------*/ /* Function Name : AT91F_DataFlashRead */ /* Object : Read a block in dataflash */ /* Input Parameters : */ /* Return value : */ /*---------------------------------------------------------------------------*/ -int AT91F_DataFlashRead( - AT91PS_DataFlash pDataFlash, - unsigned long addr, - unsigned long size, - char *buffer) +int AT91F_DataFlashRead(AT91PS_DataFlash pDataFlash, + unsigned long addr, unsigned long size, char *buffer) { unsigned long SizeToRead; AT91F_SpiEnable(pDataFlash->pDevice->cs); - if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, + if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK) return -1; while (size) { - SizeToRead = (size < 0x8000)? size:0x8000; + SizeToRead = (size < 0x8000) ? size : 0x8000; if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY) != DATAFLASH_OK) + AT91C_TIMEOUT_WRDY) != + DATAFLASH_OK) return -1; - if (AT91F_DataFlashContinuousRead (pDataFlash, addr, - (uchar *) buffer, SizeToRead) != DATAFLASH_OK) + if (AT91F_DataFlashContinuousRead(pDataFlash, addr, + (uchar *) buffer, + SizeToRead) != DATAFLASH_OK) return -1; size -= SizeToRead; @@ -558,9 +553,10 @@ int AT91F_DataFlashRead( /* Input Parameters : */ /* Return value : Dataflash status register */ /*---------------------------------------------------------------------------*/ -int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) { +int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) +{ AT91F_SpiEnable(cs); AT91F_DataFlashGetStatus(pDesc); - return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C); + return ((pDesc->command[1] == 0xFF) ? 0 : pDesc->command[1] & 0x3C); } #endif diff --git a/drivers/onenand/Makefile b/drivers/onenand/Makefile new file mode 100644 index 000000000..204941332 --- /dev/null +++ b/drivers/onenand/Makefile @@ -0,0 +1,44 @@ +# +# Copyright (C) 2005-2007 Samsung Electronics. +# Kyungmin Park <kyungmin.park@samsung.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libonenand.a + +COBJS := onenand_base.o onenand_bbt.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/onenand/onenand_base.c b/drivers/onenand/onenand_base.c new file mode 100644 index 000000000..7983a4a0d --- /dev/null +++ b/drivers/onenand/onenand_base.c @@ -0,0 +1,1294 @@ +/* + * linux/drivers/mtd/onenand/onenand_base.c + * + * Copyright (C) 2005-2007 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <common.h> + +#ifdef CONFIG_CMD_ONENAND + +#include <linux/mtd/compat.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> + +#include <asm/io.h> +#include <asm/errno.h> + +static const unsigned char ffchars[] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */ +}; + +/** + * onenand_readw - [OneNAND Interface] Read OneNAND register + * @param addr address to read + * + * Read OneNAND register + */ +static unsigned short onenand_readw(void __iomem * addr) +{ + return readw(addr); +} + +/** + * onenand_writew - [OneNAND Interface] Write OneNAND register with value + * @param value value to write + * @param addr address to write + * + * Write OneNAND register with value + */ +static void onenand_writew(unsigned short value, void __iomem * addr) +{ + writew(value, addr); +} + +/** + * onenand_block_address - [DEFAULT] Get block address + * @param device the device id + * @param block the block + * @return translated block address if DDP, otherwise same + * + * Setup Start Address 1 Register (F100h) + */ +static int onenand_block_address(int device, int block) +{ + if (device & ONENAND_DEVICE_IS_DDP) { + /* Device Flash Core select, NAND Flash Block Address */ + int dfs = 0, density, mask; + + density = device >> ONENAND_DEVICE_DENSITY_SHIFT; + mask = (1 << (density + 6)); + + if (block & mask) + dfs = 1; + + return (dfs << ONENAND_DDP_SHIFT) | (block & (mask - 1)); + } + + return block; +} + +/** + * onenand_bufferram_address - [DEFAULT] Get bufferram address + * @param device the device id + * @param block the block + * @return set DBS value if DDP, otherwise 0 + * + * Setup Start Address 2 Register (F101h) for DDP + */ +static int onenand_bufferram_address(int device, int block) +{ + if (device & ONENAND_DEVICE_IS_DDP) { + /* Device BufferRAM Select */ + int dbs = 0, density, mask; + + density = device >> ONENAND_DEVICE_DENSITY_SHIFT; + mask = (1 << (density + 6)); + + if (block & mask) + dbs = 1; + + return (dbs << ONENAND_DDP_SHIFT); + } + + return 0; +} + +/** + * onenand_page_address - [DEFAULT] Get page address + * @param page the page address + * @param sector the sector address + * @return combined page and sector address + * + * Setup Start Address 8 Register (F107h) + */ +static int onenand_page_address(int page, int sector) +{ + /* Flash Page Address, Flash Sector Address */ + int fpa, fsa; + + fpa = page & ONENAND_FPA_MASK; + fsa = sector & ONENAND_FSA_MASK; + + return ((fpa << ONENAND_FPA_SHIFT) | fsa); +} + +/** + * onenand_buffer_address - [DEFAULT] Get buffer address + * @param dataram1 DataRAM index + * @param sectors the sector address + * @param count the number of sectors + * @return the start buffer value + * + * Setup Start Buffer Register (F200h) + */ +static int onenand_buffer_address(int dataram1, int sectors, int count) +{ + int bsa, bsc; + + /* BufferRAM Sector Address */ + bsa = sectors & ONENAND_BSA_MASK; + + if (dataram1) + bsa |= ONENAND_BSA_DATARAM1; /* DataRAM1 */ + else + bsa |= ONENAND_BSA_DATARAM0; /* DataRAM0 */ + + /* BufferRAM Sector Count */ + bsc = count & ONENAND_BSC_MASK; + + return ((bsa << ONENAND_BSA_SHIFT) | bsc); +} + +/** + * onenand_command - [DEFAULT] Send command to OneNAND device + * @param mtd MTD device structure + * @param cmd the command to be sent + * @param addr offset to read from or write to + * @param len number of bytes to read or write + * + * Send command to OneNAND device. This function is used for middle/large page + * devices (1KB/2KB Bytes per page) + */ +static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, + size_t len) +{ + struct onenand_chip *this = mtd->priv; + int value, readcmd = 0; + int block, page; + /* Now we use page size operation */ + int sectors = 4, count = 4; + + /* Address translation */ + switch (cmd) { + case ONENAND_CMD_UNLOCK: + case ONENAND_CMD_LOCK: + case ONENAND_CMD_LOCK_TIGHT: + block = -1; + page = -1; + break; + + case ONENAND_CMD_ERASE: + case ONENAND_CMD_BUFFERRAM: + block = (int)(addr >> this->erase_shift); + page = -1; + break; + + default: + block = (int)(addr >> this->erase_shift); + page = (int)(addr >> this->page_shift); + page &= this->page_mask; + break; + } + + /* NOTE: The setting order of the registers is very important! */ + if (cmd == ONENAND_CMD_BUFFERRAM) { + /* Select DataRAM for DDP */ + value = onenand_bufferram_address(this->device_id, block); + this->write_word(value, + this->base + ONENAND_REG_START_ADDRESS2); + + /* Switch to the next data buffer */ + ONENAND_SET_NEXT_BUFFERRAM(this); + + return 0; + } + + if (block != -1) { + /* Write 'DFS, FBA' of Flash */ + value = onenand_block_address(this->device_id, block); + this->write_word(value, + this->base + ONENAND_REG_START_ADDRESS1); + } + + if (page != -1) { + int dataram; + + switch (cmd) { + case ONENAND_CMD_READ: + case ONENAND_CMD_READOOB: + dataram = ONENAND_SET_NEXT_BUFFERRAM(this); + readcmd = 1; + break; + + default: + dataram = ONENAND_CURRENT_BUFFERRAM(this); + break; + } + + /* Write 'FPA, FSA' of Flash */ + value = onenand_page_address(page, sectors); + this->write_word(value, + this->base + ONENAND_REG_START_ADDRESS8); + + /* Write 'BSA, BSC' of DataRAM */ + value = onenand_buffer_address(dataram, sectors, count); + this->write_word(value, this->base + ONENAND_REG_START_BUFFER); + + if (readcmd) { + /* Select DataRAM for DDP */ + value = + onenand_bufferram_address(this->device_id, block); + this->write_word(value, + this->base + + ONENAND_REG_START_ADDRESS2); + } + } + + /* Interrupt clear */ + this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT); + /* Write command */ + this->write_word(cmd, this->base + ONENAND_REG_COMMAND); + + return 0; +} + +/** + * onenand_wait - [DEFAULT] wait until the command is done + * @param mtd MTD device structure + * @param state state to select the max. timeout value + * + * Wait for command done. This applies to all OneNAND command + * Read can take up to 30us, erase up to 2ms and program up to 350us + * according to general OneNAND specs + */ +static int onenand_wait(struct mtd_info *mtd, int state) +{ + struct onenand_chip *this = mtd->priv; + unsigned int flags = ONENAND_INT_MASTER; + unsigned int interrupt = 0; + unsigned int ctrl, ecc; + + while (1) { + interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); + if (interrupt & flags) + break; + } + + ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); + + if (ctrl & ONENAND_CTRL_ERROR) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_wait: controller error = 0x%04x\n", ctrl); + return -EAGAIN; + } + + if (ctrl & ONENAND_CTRL_LOCK) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_wait: it's locked error = 0x%04x\n", ctrl); + return -EIO; + } + + if (interrupt & ONENAND_INT_READ) { + ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS); + if (ecc & ONENAND_ECC_2BIT_ALL) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_wait: ECC error = 0x%04x\n", ecc); + return -EBADMSG; + } + } + + return 0; +} + +/** + * onenand_bufferram_offset - [DEFAULT] BufferRAM offset + * @param mtd MTD data structure + * @param area BufferRAM area + * @return offset given area + * + * Return BufferRAM offset given area + */ +static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area) +{ + struct onenand_chip *this = mtd->priv; + + if (ONENAND_CURRENT_BUFFERRAM(this)) { + if (area == ONENAND_DATARAM) + return mtd->oobblock; + if (area == ONENAND_SPARERAM) + return mtd->oobsize; + } + + return 0; +} + +/** + * onenand_read_bufferram - [OneNAND Interface] Read the bufferram area + * @param mtd MTD data structure + * @param area BufferRAM area + * @param buffer the databuffer to put/get data + * @param offset offset to read from or write to + * @param count number of bytes to read/write + * + * Read the BufferRAM area + */ +static int onenand_read_bufferram(struct mtd_info *mtd, int area, + unsigned char *buffer, int offset, + size_t count) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *bufferram; + + bufferram = this->base + area; + bufferram += onenand_bufferram_offset(mtd, area); + + memcpy(buffer, bufferram + offset, count); + + return 0; +} + +/** + * onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode + * @param mtd MTD data structure + * @param area BufferRAM area + * @param buffer the databuffer to put/get data + * @param offset offset to read from or write to + * @param count number of bytes to read/write + * + * Read the BufferRAM area with Sync. Burst Mode + */ +static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area, + unsigned char *buffer, int offset, + size_t count) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *bufferram; + + bufferram = this->base + area; + bufferram += onenand_bufferram_offset(mtd, area); + + this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ); + + memcpy(buffer, bufferram + offset, count); + + this->mmcontrol(mtd, 0); + + return 0; +} + +/** + * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area + * @param mtd MTD data structure + * @param area BufferRAM area + * @param buffer the databuffer to put/get data + * @param offset offset to read from or write to + * @param count number of bytes to read/write + * + * Write the BufferRAM area + */ +static int onenand_write_bufferram(struct mtd_info *mtd, int area, + const unsigned char *buffer, int offset, + size_t count) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *bufferram; + + bufferram = this->base + area; + bufferram += onenand_bufferram_offset(mtd, area); + + memcpy(bufferram + offset, buffer, count); + + return 0; +} + +/** + * onenand_check_bufferram - [GENERIC] Check BufferRAM information + * @param mtd MTD data structure + * @param addr address to check + * @return 1 if there are valid data, otherwise 0 + * + * Check bufferram if there is data we required + */ +static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr) +{ + struct onenand_chip *this = mtd->priv; + int block, page; + int i; + + block = (int)(addr >> this->erase_shift); + page = (int)(addr >> this->page_shift); + page &= this->page_mask; + + i = ONENAND_CURRENT_BUFFERRAM(this); + + /* Is there valid data? */ + if (this->bufferram[i].block == block && + this->bufferram[i].page == page && this->bufferram[i].valid) + return 1; + + return 0; +} + +/** + * onenand_update_bufferram - [GENERIC] Update BufferRAM information + * @param mtd MTD data structure + * @param addr address to update + * @param valid valid flag + * + * Update BufferRAM information + */ +static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr, + int valid) +{ + struct onenand_chip *this = mtd->priv; + int block, page; + int i; + + block = (int)(addr >> this->erase_shift); + page = (int)(addr >> this->page_shift); + page &= this->page_mask; + + /* Invalidate BufferRAM */ + for (i = 0; i < MAX_BUFFERRAM; i++) { + if (this->bufferram[i].block == block && + this->bufferram[i].page == page) + this->bufferram[i].valid = 0; + } + + /* Update BufferRAM */ + i = ONENAND_CURRENT_BUFFERRAM(this); + this->bufferram[i].block = block; + this->bufferram[i].page = page; + this->bufferram[i].valid = valid; + + return 0; +} + +/** + * onenand_get_device - [GENERIC] Get chip for selected access + * @param mtd MTD device structure + * @param new_state the state which is requested + * + * Get the device and lock it for exclusive access + */ +static void onenand_get_device(struct mtd_info *mtd, int new_state) +{ + /* Do nothing */ +} + +/** + * onenand_release_device - [GENERIC] release chip + * @param mtd MTD device structure + * + * Deselect, release chip lock and wake up anyone waiting on the device + */ +static void onenand_release_device(struct mtd_info *mtd) +{ + /* Do nothing */ +} + +/** + * onenand_read_ecc - [MTD Interface] Read data with ECC + * @param mtd MTD device structure + * @param from offset to read from + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put data + * @param oob_buf filesystem supplied oob data buffer + * @param oobsel oob selection structure + * + * OneNAND read with ECC + */ +static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf, + u_char * oob_buf, struct nand_oobinfo *oobsel) +{ + struct onenand_chip *this = mtd->priv; + int read = 0, column; + int thislen; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ecc: from = 0x%08x, len = %i\n", + (unsigned int)from, (int)len); + + /* Do not allow reads past end of device */ + if ((from + len) > mtd->size) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_read_ecc: Attempt read beyond end of device\n"); + *retlen = 0; + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_READING); + + while (read < len) { + thislen = min_t(int, mtd->oobblock, len - read); + + column = from & (mtd->oobblock - 1); + if (column + thislen > mtd->oobblock) + thislen = mtd->oobblock - column; + + if (!onenand_check_bufferram(mtd, from)) { + this->command(mtd, ONENAND_CMD_READ, from, + mtd->oobblock); + ret = this->wait(mtd, FL_READING); + /* First copy data and check return value for ECC handling */ + onenand_update_bufferram(mtd, from, 1); + } + + this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, + thislen); + + read += thislen; + if (read == len) + break; + + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_read_ecc: read failed = %d\n", ret); + break; + } + + from += thislen; + buf += thislen; + } + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + /* + * Return success, if no ECC failures, else -EBADMSG + * fs driver will take care of that, because + * retlen == desired len and result == -EBADMSG + */ + *retlen = read; + return ret; +} + +/** + * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc + * @param mtd MTD device structure + * @param from offset to read from + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put data + * + * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL +*/ +int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf) +{ + return onenand_read_ecc(mtd, from, len, retlen, buf, NULL, NULL); +} + +/** + * onenand_read_oob - [MTD Interface] OneNAND read out-of-band + * @param mtd MTD device structure + * @param from offset to read from + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put data + * + * OneNAND read out-of-band data from the spare area + */ +int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf) +{ + struct onenand_chip *this = mtd->priv; + int read = 0, thislen, column; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n", + (unsigned int)from, (int)len); + + /* Initialize return length value */ + *retlen = 0; + + /* Do not allow reads past end of device */ + if (unlikely((from + len) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_read_oob: Attempt read beyond end of device\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_READING); + + column = from & (mtd->oobsize - 1); + + while (read < len) { + thislen = mtd->oobsize - column; + thislen = min_t(int, thislen, len); + + this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize); + + onenand_update_bufferram(mtd, from, 0); + + ret = this->wait(mtd, FL_READING); + /* First copy data and check return value for ECC handling */ + + this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, + thislen); + + read += thislen; + if (read == len) + break; + + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_read_oob: read failed = %d\n", ret); + break; + } + + buf += thislen; + /* Read more? */ + if (read < len) { + /* Page size */ + from += mtd->oobblock; + column = 0; + } + } + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + *retlen = read; + return ret; +} + +#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE +/** + * onenand_verify_page - [GENERIC] verify the chip contents after a write + * @param mtd MTD device structure + * @param buf the databuffer to verify + * @param block block address + * @param page page address + * + * Check DataRAM area directly + */ +static int onenand_verify_page(struct mtd_info *mtd, u_char * buf, + loff_t addr, int block, int page) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *dataram0, *dataram1; + int ret = 0; + + this->command(mtd, ONENAND_CMD_READ, addr, mtd->oobblock); + + ret = this->wait(mtd, FL_READING); + if (ret) + return ret; + + onenand_update_bufferram(mtd, addr, 1); + + /* Check, if the two dataram areas are same */ + dataram0 = this->base + ONENAND_DATARAM; + dataram1 = dataram0 + mtd->oobblock; + + if (memcmp(dataram0, dataram1, mtd->oobblock)) + return -EBADMSG; + + return 0; +} +#else +#define onenand_verify_page(...) (0) +#endif + +#define NOTALIGNED(x) ((x & (mtd->oobblock - 1)) != 0) + +/** + * onenand_write_ecc - [MTD Interface] OneNAND write with ECC + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * @param eccbuf filesystem supplied oob data buffer + * @param oobsel oob selection structure + * + * OneNAND write with ECC + */ +static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf, + u_char * eccbuf, struct nand_oobinfo *oobsel) +{ + struct onenand_chip *this = mtd->priv; + int written = 0; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ecc: to = 0x%08x, len = %i\n", + (unsigned int)to, (int)len); + + /* Initialize retlen, in case of early exit */ + *retlen = 0; + + /* Do not allow writes past end of device */ + if (unlikely((to + len) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_write_ecc: Attempt write to past end of device\n"); + return -EINVAL; + } + + /* Reject writes, which are not page aligned */ + if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_write_ecc: Attempt to write not page aligned data\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_WRITING); + + /* Loop until all data write */ + while (written < len) { + int thislen = min_t(int, mtd->oobblock, len - written); + + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock); + + this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen); + this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, + mtd->oobsize); + + this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock); + + onenand_update_bufferram(mtd, to, 1); + + ret = this->wait(mtd, FL_WRITING); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_write_ecc: write filaed %d\n", ret); + break; + } + + written += thislen; + + /* Only check verify write turn on */ + ret = onenand_verify_page(mtd, (u_char *) buf, to, block, page); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_write_ecc: verify failed %d\n", ret); + break; + } + + if (written == len) + break; + + to += thislen; + buf += thislen; + } + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + *retlen = written; + + return ret; +} + +/** + * onenand_write - [MTD Interface] compability function for onenand_write_ecc + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * + * This function simply calls onenand_write_ecc + * with oob buffer and oobsel = NULL + */ +int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf) +{ + return onenand_write_ecc(mtd, to, len, retlen, buf, NULL, NULL); +} + +/** + * onenand_write_oob - [MTD Interface] OneNAND write out-of-band + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * + * OneNAND write out-of-band + */ +int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf) +{ + struct onenand_chip *this = mtd->priv; + int column, status; + int written = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", + (unsigned int)to, (int)len); + + /* Initialize retlen, in case of early exit */ + *retlen = 0; + + /* Do not allow writes past end of device */ + if (unlikely((to + len) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_write_oob: Attempt write to past end of device\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_WRITING); + + /* Loop until all data write */ + while (written < len) { + int thislen = min_t(int, mtd->oobsize, len - written); + + column = to & (mtd->oobsize - 1); + + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize); + + this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, + mtd->oobsize); + this->write_bufferram(mtd, ONENAND_SPARERAM, buf, column, + thislen); + + this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); + + onenand_update_bufferram(mtd, to, 0); + + status = this->wait(mtd, FL_WRITING); + if (status) + break; + + written += thislen; + if (written == len) + break; + + to += thislen; + buf += thislen; + } + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + *retlen = written; + + return 0; +} + +/** + * onenand_erase - [MTD Interface] erase block(s) + * @param mtd MTD device structure + * @param instr erase instruction + * + * Erase one ore more blocks + */ +int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct onenand_chip *this = mtd->priv; + unsigned int block_size; + loff_t addr; + int len; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n", + (unsigned int)instr->addr, (unsigned int)instr->len); + + block_size = (1 << this->erase_shift); + + /* Start address must align on block boundary */ + if (unlikely(instr->addr & (block_size - 1))) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Unaligned address\n"); + return -EINVAL; + } + + /* Length must align on block boundary */ + if (unlikely(instr->len & (block_size - 1))) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_erase: Length not block aligned\n"); + return -EINVAL; + } + + /* Do not allow erase past end of device */ + if (unlikely((instr->len + instr->addr) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_erase: Erase past end of device\n"); + return -EINVAL; + } + + instr->fail_addr = 0xffffffff; + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_ERASING); + + /* Loop throught the pages */ + len = instr->len; + addr = instr->addr; + + instr->state = MTD_ERASING; + + while (len) { + + /* TODO Check badblock */ + + this->command(mtd, ONENAND_CMD_ERASE, addr, block_size); + + ret = this->wait(mtd, FL_ERASING); + /* Check, if it is write protected */ + if (ret) { + if (ret == -EPERM) + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_erase: Device is write protected!!!\n"); + else + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_erase: Failed erase, block %d\n", + (unsigned)(addr >> this->erase_shift)); + instr->state = MTD_ERASE_FAILED; + instr->fail_addr = addr; + goto erase_exit; + } + + len -= block_size; + addr += block_size; + } + + instr->state = MTD_ERASE_DONE; + + erase_exit: + + ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; + /* Do call back function */ + if (!ret) + mtd_erase_callback(instr); + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + return ret; +} + +/** + * onenand_sync - [MTD Interface] sync + * @param mtd MTD device structure + * + * Sync is actually a wait for chip ready function + */ +void onenand_sync(struct mtd_info *mtd) +{ + DEBUG(MTD_DEBUG_LEVEL3, "onenand_sync: called\n"); + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_SYNCING); + + /* Release it and go back */ + onenand_release_device(mtd); +} + +/** + * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + */ +int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs) +{ + /* + * TODO + * 1. Bad block table (BBT) + * -> using NAND BBT to support JFFS2 + * 2. Bad block management (BBM) + * -> bad block replace scheme + * + * Currently we do nothing + */ + return 0; +} + +/** + * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + */ +int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + /* see above */ + return 0; +} + +/** + * onenand_unlock - [MTD Interface] Unlock block(s) + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + * @param len number of bytes to unlock + * + * Unlock one or more blocks + */ +int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) +{ + struct onenand_chip *this = mtd->priv; + int start, end, block, value, status; + + start = ofs >> this->erase_shift; + end = len >> this->erase_shift; + + /* Continuous lock scheme */ + if (this->options & ONENAND_CONT_LOCK) { + /* Set start block address */ + this->write_word(start, + this->base + ONENAND_REG_START_BLOCK_ADDRESS); + /* Set end block address */ + this->write_word(end - 1, + this->base + ONENAND_REG_END_BLOCK_ADDRESS); + /* Write unlock command */ + this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0); + + /* There's no return value */ + this->wait(mtd, FL_UNLOCKING); + + /* Sanity check */ + while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) + & ONENAND_CTRL_ONGO) + continue; + + /* Check lock status */ + status = this->read_word(this->base + ONENAND_REG_WP_STATUS); + if (!(status & ONENAND_WP_US)) + printk(KERN_ERR "wp status = 0x%x\n", status); + + return 0; + } + + /* Block lock scheme */ + for (block = start; block < end; block++) { + /* Set start block address */ + this->write_word(block, + this->base + ONENAND_REG_START_BLOCK_ADDRESS); + /* Write unlock command */ + this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0); + + /* There's no return value */ + this->wait(mtd, FL_UNLOCKING); + + /* Sanity check */ + while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) + & ONENAND_CTRL_ONGO) + continue; + + /* Set block address for read block status */ + value = onenand_block_address(this->device_id, block); + this->write_word(value, + this->base + ONENAND_REG_START_ADDRESS1); + + /* Check lock status */ + status = this->read_word(this->base + ONENAND_REG_WP_STATUS); + if (!(status & ONENAND_WP_US)) + printk(KERN_ERR "block = %d, wp status = 0x%x\n", + block, status); + } + + return 0; +} + +/** + * onenand_print_device_info - Print device ID + * @param device device ID + * + * Print device ID + */ +void onenand_print_device_info(int device, int verbose) +{ + int vcc, demuxed, ddp, density; + + if (!verbose) + return; + + vcc = device & ONENAND_DEVICE_VCC_MASK; + demuxed = device & ONENAND_DEVICE_IS_DEMUX; + ddp = device & ONENAND_DEVICE_IS_DDP; + density = device >> ONENAND_DEVICE_DENSITY_SHIFT; + printk(KERN_INFO "%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n", + demuxed ? "" : "Muxed ", + ddp ? "(DDP)" : "", + (16 << density), vcc ? "2.65/3.3" : "1.8", device); +} + +static const struct onenand_manufacturers onenand_manuf_ids[] = { + {ONENAND_MFR_SAMSUNG, "Samsung"}, + {ONENAND_MFR_UNKNOWN, "Unknown"} +}; + +/** + * onenand_check_maf - Check manufacturer ID + * @param manuf manufacturer ID + * + * Check manufacturer ID + */ +static int onenand_check_maf(int manuf) +{ + int i; + + for (i = 0; onenand_manuf_ids[i].id; i++) { + if (manuf == onenand_manuf_ids[i].id) + break; + } + +#ifdef ONENAND_DEBUG + printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", + onenand_manuf_ids[i].name, manuf); +#endif + + return (i != ONENAND_MFR_UNKNOWN); +} + +/** + * onenand_probe - [OneNAND Interface] Probe the OneNAND device + * @param mtd MTD device structure + * + * OneNAND detection method: + * Compare the the values from command with ones from register + */ +static int onenand_probe(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + int bram_maf_id, bram_dev_id, maf_id, dev_id; + int version_id; + int density; + + /* Send the command for reading device ID from BootRAM */ + this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM); + + /* Read manufacturer and device IDs from BootRAM */ + bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0); + bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2); + + /* Check manufacturer ID */ + if (onenand_check_maf(bram_maf_id)) + return -ENXIO; + + /* Reset OneNAND to read default register values */ + this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM); + + { + int i; + for (i = 0; i < 10000; i++) ; + } + + /* Read manufacturer and device IDs from Register */ + maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); + dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); + + /* Check OneNAND device */ + if (maf_id != bram_maf_id || dev_id != bram_dev_id) + return -ENXIO; + + /* Flash device information */ + onenand_print_device_info(dev_id, 0); + this->device_id = dev_id; + + density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT; + this->chipsize = (16 << density) << 20; + + /* OneNAND page size & block size */ + /* The data buffer size is equal to page size */ + mtd->oobblock = + this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); + mtd->oobsize = mtd->oobblock >> 5; + /* Pagers per block is always 64 in OneNAND */ + mtd->erasesize = mtd->oobblock << 6; + + this->erase_shift = ffs(mtd->erasesize) - 1; + this->page_shift = ffs(mtd->oobblock) - 1; + this->ppb_shift = (this->erase_shift - this->page_shift); + this->page_mask = (mtd->erasesize / mtd->oobblock) - 1; + + /* REVIST: Multichip handling */ + + mtd->size = this->chipsize; + + /* Version ID */ + version_id = this->read_word(this->base + ONENAND_REG_VERSION_ID); +#ifdef ONENAND_DEBUG + printk(KERN_DEBUG "OneNAND version = 0x%04x\n", version_id); +#endif + + /* Lock scheme */ + if (density <= ONENAND_DEVICE_DENSITY_512Mb && + !(version_id >> ONENAND_VERSION_PROCESS_SHIFT)) { + printk(KERN_INFO "Lock scheme is Continues Lock\n"); + this->options |= ONENAND_CONT_LOCK; + } + + return 0; +} + +/** + * onenand_scan - [OneNAND Interface] Scan for the OneNAND device + * @param mtd MTD device structure + * @param maxchips Number of chips to scan for + * + * This fills out all the not initialized function pointers + * with the defaults. + * The flash ID is read and the mtd/chip structures are + * filled with the appropriate values. + */ +int onenand_scan(struct mtd_info *mtd, int maxchips) +{ + struct onenand_chip *this = mtd->priv; + + if (!this->read_word) + this->read_word = onenand_readw; + if (!this->write_word) + this->write_word = onenand_writew; + + if (!this->command) + this->command = onenand_command; + if (!this->wait) + this->wait = onenand_wait; + + if (!this->read_bufferram) + this->read_bufferram = onenand_read_bufferram; + if (!this->write_bufferram) + this->write_bufferram = onenand_write_bufferram; + + if (onenand_probe(mtd)) + return -ENXIO; + + /* Set Sync. Burst Read after probing */ + if (this->mmcontrol) { + printk(KERN_INFO "OneNAND Sync. Burst Read support\n"); + this->read_bufferram = onenand_sync_read_bufferram; + } + + onenand_unlock(mtd, 0, mtd->size); + + return onenand_default_bbt(mtd); +} + +/** + * onenand_release - [OneNAND Interface] Free resources held by the OneNAND device + * @param mtd MTD device structure + */ +void onenand_release(struct mtd_info *mtd) +{ +} + +/* + * OneNAND initialization at U-Boot + */ +struct mtd_info onenand_mtd; +struct onenand_chip onenand_chip; + +void onenand_init(void) +{ + memset(&onenand_mtd, 0, sizeof(struct mtd_info)); + memset(&onenand_chip, 0, sizeof(struct onenand_chip)); + + onenand_chip.base = (void *)CFG_ONENAND_BASE; + onenand_mtd.priv = &onenand_chip; + + onenand_scan(&onenand_mtd, 1); + + puts("OneNAND: "); + print_size(onenand_mtd.size, "\n"); +} + +#endif /* CONFIG_CMD_ONENAND */ diff --git a/drivers/onenand/onenand_bbt.c b/drivers/onenand/onenand_bbt.c new file mode 100644 index 000000000..5a610ee5e --- /dev/null +++ b/drivers/onenand/onenand_bbt.c @@ -0,0 +1,265 @@ +/* + * linux/drivers/mtd/onenand/onenand_bbt.c + * + * Bad Block Table support for the OneNAND driver + * + * Copyright(c) 2005-2007 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * TODO: + * Split BBT core and chip specific BBT. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <common.h> + +#ifdef CONFIG_CMD_ONENAND + +#include <linux/mtd/compat.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> +#include <malloc.h> + +#include <asm/errno.h> + +/** + * check_short_pattern - [GENERIC] check if a pattern is in the buffer + * @param buf the buffer to search + * @param len the length of buffer to search + * @param paglen the pagelength + * @param td search pattern descriptor + * + * Check for a pattern at the given place. Used to search bad block + * tables and good / bad block identifiers. Same as check_pattern, but + * no optional empty check and the pattern is expected to start + * at offset 0. + */ +static int check_short_pattern(uint8_t * buf, int len, int paglen, + struct nand_bbt_descr *td) +{ + int i; + uint8_t *p = buf; + + /* Compare the pattern */ + for (i = 0; i < td->len; i++) { + if (p[i] != td->pattern[i]) + return -1; + } + return 0; +} + +/** + * create_bbt - [GENERIC] Create a bad block table by scanning the device + * @param mtd MTD device structure + * @param buf temporary buffer + * @param bd descriptor for the good/bad block search pattern + * @param chip create the table for a specific chip, -1 read all chips. + * Applies only if NAND_BBT_PERCHIP option is set + * + * Create a bad block table by scanning the device + * for the given good/bad block identify pattern + */ +static int create_bbt(struct mtd_info *mtd, uint8_t * buf, + struct nand_bbt_descr *bd, int chip) +{ + struct onenand_chip *this = mtd->priv; + struct bbm_info *bbm = this->bbm; + int i, j, numblocks, len, scanlen; + int startblock; + loff_t from; + size_t readlen, ooblen; + + printk(KERN_INFO "Scanning device for bad blocks\n"); + + len = 1; + + /* We need only read few bytes from the OOB area */ + scanlen = ooblen = 0; + readlen = bd->len; + + /* chip == -1 case only */ + /* Note that numblocks is 2 * (real numblocks) here; + * see i += 2 below as it makses shifting and masking less painful + */ + numblocks = mtd->size >> (bbm->bbt_erase_shift - 1); + startblock = 0; + from = 0; + + for (i = startblock; i < numblocks;) { + int ret; + + for (j = 0; j < len; j++) { + size_t retlen; + + /* No need to read pages fully, + * just read required OOB bytes */ + ret = onenand_read_oob(mtd, + from + j * mtd->oobblock + + bd->offs, readlen, &retlen, + &buf[0]); + + if (ret && ret != -EAGAIN) { + printk("ret = %d\n", ret); + return ret; + } + + if (check_short_pattern + (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) { + bbm->bbt[i >> 3] |= 0x03 << (i & 0x6); + printk(KERN_WARNING + "Bad eraseblock %d at 0x%08x\n", i >> 1, + (unsigned int)from); + break; + } + } + i += 2; + from += (1 << bbm->bbt_erase_shift); + } + + return 0; +} + +/** + * onenand_memory_bbt - [GENERIC] create a memory based bad block table + * @param mtd MTD device structure + * @param bd descriptor for the good/bad block search pattern + * + * The function creates a memory based bbt by scanning the device + * for manufacturer / software marked good / bad blocks + */ +static inline int onenand_memory_bbt(struct mtd_info *mtd, + struct nand_bbt_descr *bd) +{ + unsigned char data_buf[MAX_ONENAND_PAGESIZE]; + + bd->options &= ~NAND_BBT_SCANEMPTY; + return create_bbt(mtd, data_buf, bd, -1); +} + +/** + * onenand_isbad_bbt - [OneNAND Interface] Check if a block is bad + * @param mtd MTD device structure + * @param offs offset in the device + * @param allowbbt allow access to bad block table region + */ +static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) +{ + struct onenand_chip *this = mtd->priv; + struct bbm_info *bbm = this->bbm; + int block; + uint8_t res; + + /* Get block number * 2 */ + block = (int)(offs >> (bbm->bbt_erase_shift - 1)); + res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03; + + DEBUG(MTD_DEBUG_LEVEL2, + "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n", + (unsigned int)offs, block >> 1, res); + + switch ((int)res) { + case 0x00: + return 0; + case 0x01: + return 1; + case 0x02: + return allowbbt ? 0 : 1; + } + + return 1; +} + +/** + * onenand_scan_bbt - [OneNAND Interface] scan, find, read and maybe create bad block table(s) + * @param mtd MTD device structure + * @param bd descriptor for the good/bad block search pattern + * + * The function checks, if a bad block table(s) is/are already + * available. If not it scans the device for manufacturer + * marked good / bad blocks and writes the bad block table(s) to + * the selected place. + * + * The bad block table memory is allocated here. It must be freed + * by calling the onenand_free_bbt function. + * + */ +int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) +{ + struct onenand_chip *this = mtd->priv; + struct bbm_info *bbm = this->bbm; + int len, ret = 0; + + len = mtd->size >> (this->erase_shift + 2); + /* Allocate memory (2bit per block) */ + bbm->bbt = malloc(len); + if (!bbm->bbt) { + printk(KERN_ERR "onenand_scan_bbt: Out of memory\n"); + return -ENOMEM; + } + /* Clear the memory bad block table */ + memset(bbm->bbt, 0x00, len); + + /* Set the bad block position */ + bbm->badblockpos = ONENAND_BADBLOCK_POS; + + /* Set erase shift */ + bbm->bbt_erase_shift = this->erase_shift; + + if (!bbm->isbad_bbt) + bbm->isbad_bbt = onenand_isbad_bbt; + + /* Scan the device to build a memory based bad block table */ + if ((ret = onenand_memory_bbt(mtd, bd))) { + printk(KERN_ERR + "onenand_scan_bbt: Can't scan flash and build the RAM-based BBT\n"); + free(bbm->bbt); + bbm->bbt = NULL; + } + + return ret; +} + +/* + * Define some generic bad / good block scan pattern which are used + * while scanning a device for factory marked good / bad blocks. + */ +static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; + +static struct nand_bbt_descr largepage_memorybased = { + .options = 0, + .offs = 0, + .len = 2, + .pattern = scan_ff_pattern, +}; + +/** + * onenand_default_bbt - [OneNAND Interface] Select a default bad block table for the device + * @param mtd MTD device structure + * + * This function selects the default bad block table + * support for the device and calls the onenand_scan_bbt function + */ +int onenand_default_bbt(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + struct bbm_info *bbm; + + this->bbm = malloc(sizeof(struct bbm_info)); + if (!this->bbm) + return -ENOMEM; + + bbm = this->bbm; + + memset(bbm, 0, sizeof(struct bbm_info)); + + /* 1KB page has same configuration as 2KB page */ + if (!bbm->badblock_pattern) + bbm->badblock_pattern = &largepage_memorybased; + + return onenand_scan_bbt(mtd, bbm->badblock_pattern); +} + +#endif /* CFG_CMD_ONENAND */ diff --git a/drivers/serial_xuartlite.c b/drivers/serial_xuartlite.c index ed59abea8..d678ab6b7 100644 --- a/drivers/serial_xuartlite.c +++ b/drivers/serial_xuartlite.c @@ -24,7 +24,7 @@ #include <config.h> -#ifdef CONFIG_MICROBLAZE +#ifdef CONFIG_XILINX_UARTLITE #include <asm/serial_xuartlite.h> diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index 3d91e99b9..d7ef65d5d 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -59,6 +59,7 @@ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_CMD_NFS /* NFS support */ +#define CONFIG_CMD_ONENAND /* OneNAND support */ #define CONFIG_CMD_PCI /* pciinfo */ #define CONFIG_CMD_PCMCIA /* PCMCIA support */ #define CONFIG_CMD_PING /* ping support */ @@ -76,6 +77,6 @@ #define CONFIG_CMD_USB /* USB Support */ #define CONFIG_CMD_VFD /* VFD support (TRAB) */ #define CONFIG_CMD_XIMG /* Load part of Multi Image */ -#define CONFIG_CMD_MUX /* AT91 MMC/SPI Mux Support */ +#define CONFIG_CMD_AT91_SPIMUX /* AT91 MMC/SPI Mux Support */ #endif /* _CONFIG_CMD_ALL_H */ diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index e0c9d81be..d55340404 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -188,7 +188,7 @@ #endif #ifdef CONFIG_PCI -#define CONFIG_CMD_CMD_PCI +#define CONFIG_CMD_PCI #endif #if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300) @@ -238,13 +238,13 @@ "protect on FC000000 +${filesize}\0" #endif -#ifndef CONFIG_CAM5200 +#if defined(CONFIG_TQM5200) #define CUSTOM_ENV_SETTINGS \ + "hostname=tqm5200\0" \ "bootfile=/tftpboot/tqm5200/uImage\0" \ - "bootfile_fdt=/tftpboot/tqm5200/uImage_fdt\0" \ "fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" -#else +#elif defined(CONFIG_CAM5200) #define CUSTOM_ENV_SETTINGS \ "bootfile=cam5200/uImage\0" \ "u-boot=cam5200/u-boot.bin\0" \ @@ -252,11 +252,13 @@ #endif #define CONFIG_EXTRA_ENV_SETTINGS \ - "console=ttyS0\0" \ - "kernel_addr=200000\0" \ - "fdt_addr=400000\0" \ - "hostname=tqm5200\0" \ "netdev=eth0\0" \ + "console=ttyPSC0\0" \ + "fdt_addr=FC0A0000\0" \ + "kernel_addr=FC0C0000\0" \ + "ramdisk_addr=FC300000\0" \ + "kernel_addr_r=200000\0" \ + "fdt_addr_r=400000\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -266,16 +268,20 @@ ":${hostname}:${netdev}:off panic=1\0" \ "addcons=setenv bootargs ${bootargs} " \ "console=${console},${baudrate}\0" \ - "flash_self=run ramargs addip addcons;" \ + "flash_self_old=sete console ttyS0; run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip addcons;" \ + "flash_self=run ramargs addip addcons;" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "flash_nfs_old=sete console ttyS0; run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "net_nfs=tftp ${kernel_addr} ${bootfile};" \ - "run nfsargs addip addcons;bootm\0" \ - "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt};" \ - "tftp ${fdt_addr} ${fdt_file};setenv console ttyPSC0;" \ - "run nfsargs addip addcons;" \ + "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \ + "sete console ttyS0; run nfsargs addip addcons;bootm\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "tftp ${fdt_addr_r} ${fdt_file}; " \ + "run nfsargs addip addcons; " \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ CUSTOM_ENV_SETTINGS \ "load=tftp 200000 ${u-boot}\0" \ ENV_UPDT \ @@ -408,11 +414,12 @@ # endif /* CFG_LOWBOOT */ # else /* !CONFIG_TQM5200_B */ # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ - "1408k(kernel)," \ + "128k(dtb)," \ + "2304k(kernel)," \ "2m(initrd)," \ "4m(small-fs)," \ "8m(misc)," \ - "16m(big-fs)" + "15m(big-fs)" # endif /* CONFIG_TQM5200_B */ #elif defined (CONFIG_CAM5200) # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \ diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index 22eac1b4b..bb1efdf6d 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -235,6 +235,14 @@ #endif /* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* Atmel: AT24C32A-10TQ-2.7 */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */ +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 32-Byte Page Write Mode */ + +/* * Ethernet configuration */ #define CONFIG_MPC512x_FEC 1 @@ -275,6 +283,7 @@ #define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO +#define CONFIG_CMD_EEPROM #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/ml401.h b/include/configs/ml401.h index 7eeae708a..b32043850 100644 --- a/include/configs/ml401.h +++ b/include/configs/ml401.h @@ -1,7 +1,7 @@ /* - * (C) Copyright 2007 Czech Technical University. + * (C) Copyright 2007 Michal Simek * - * Michal SIMEK <monstr@seznam.cz> + * Michal SIMEK <monstr@monstr.eu> * * See file CREDITS for list of people who contributed to this * project. @@ -32,6 +32,7 @@ #define CONFIG_ML401 1 /* ML401 Board */ /* uart */ +#define CONFIG_XILINX_UARTLITE #define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR #define CONFIG_BAUDRATE XILINX_UART_BAUDRATE #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } @@ -58,6 +59,7 @@ #define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ #define FREQUENCE XILINX_CLOCK_FREQ #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) +#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ /* FSL */ #define CFG_FSL_2 @@ -86,7 +88,7 @@ * 0x11FB_F000 CFG_MONITOR_BASE * MONITOR_CODE 256kB Env * 0x13FF_F000 CFG_GBL_DATA_OFFSET - * GLOBAL_DATA 4kB bd, gd + * GLOBAL_DATA 4kB bd, gd * 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE */ @@ -99,7 +101,7 @@ /* global pointer */ #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ /* start of global data */ -#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* monitor code */ #define SIZE 0x40000 @@ -145,6 +147,16 @@ #define CFG_FLASH_PROTECTION /* hardware flash protection */ #endif /* !FLASH */ +/* system ace */ +#ifdef XILINX_SYSACE_BASEADDR + #define CONFIG_SYSTEMACE + /* #define DEBUG_SYSTEMACE */ + #define SYSTEMACE_CONFIG_FPGA + #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR + #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH + #define CONFIG_DOS_PARTITION +#endif + /* * BOOTP options */ @@ -153,28 +165,21 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #include <config_cmd_default.h> #define CONFIG_CMD_ASKENV -#define CONFIG_CMD_AUTOSCRIPT -#define CONFIG_CMD_BDI #define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_IMI #define CONFIG_CMD_IRQ -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MFSL -#define CONFIG_CMD_NET #define CONFIG_CMD_PING -#define CONFIG_CMD_RUN + +#if defined(CONFIG_SYSTEMACE) + #define CONFIG_CMD_EXT2 + #define CONFIG_CMD_FAT +#endif #if defined(FLASH) #define CONFIG_CMD_ECHO @@ -186,6 +191,8 @@ #define CONFIG_CMD_ENV #define CONFIG_CMD_SAVES #endif +#else + #undef CONFIG_CMD_FLASH #endif #if defined(CONFIG_CMD_JFFS2) @@ -210,24 +217,16 @@ #define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME "ml401" -#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" +#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" #define CONFIG_IPADDR 192.168.0.3 -#define CONFIG_SERVERIP 192.168.0.5 -#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.5 +#define CONFIG_GATEWAYIP 192.168.0.1 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD /* architecture dependent code */ #define CFG_USR_EXCEP /* user exception */ #define CFG_HZ 1000 -/* system ace */ -#define CONFIG_SYSTEMACE -/* #define DEBUG_SYSTEMACE */ -#define SYSTEMACE_CONFIG_FPGA -#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -#define CONFIG_DOS_PARTITION - #define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" #define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index b41dafaf9..c6e795320 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -189,20 +189,21 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ +/* + * I2C + */ #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#if 0 -#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */ -#else -/* I did the 'if 0' so we could keep the syntax above if ever needed. */ #undef CFG_I2C_NOPROBES -#endif #define CFG_I2C_OFFSET 0x3000 +/* I2C RTC */ +#define CONFIG_RTC_DS1337 /* This is really a DS1339 RTC */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + /* I2C EEPROM. AT24C32, we keep our environment in here. */ #define CFG_I2C_EEPROM_ADDR 0x51 /* 1010001x */ @@ -341,8 +342,13 @@ */ #include <config_cmd_default.h> -#define CONFIG_CMD_PING +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_SNTP #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h index 08ac9cbd5..020ed0230 100644 --- a/include/configs/suzaku.h +++ b/include/configs/suzaku.h @@ -48,6 +48,7 @@ #define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ #define CFG_MALLOC_BASE (CFG_MONITOR_BASE - (1024 * 1024)) +#define CONFIG_XILINX_UARTLITE #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 115200 } @@ -55,21 +56,16 @@ #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - /* * Command line configuration. */ #include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_MEMORY +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_MISC #define CFG_UART1_BASE (0xFFFF2000) #define CONFIG_SERIAL_BASE CFG_UART1_BASE @@ -108,4 +104,7 @@ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define XILINX_CLOCK_FREQ 50000000 +#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ + #endif /* __CONFIG_H */ diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index 35001d7ad..b1c0ee666 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 Czech Technical University. + * (C) Copyright 2007 Michal Simek * * Michal SIMEK <monstr@monstr.eu> * @@ -31,6 +31,7 @@ #define CONFIG_XUPV2P 1 /* uart */ +#define CONFIG_XILINX_UARTLITE #define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR #define CONFIG_BAUDRATE XILINX_UART_BAUDRATE #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } diff --git a/include/led.h b/include/led.h deleted file mode 100644 index 57c2b4a37..000000000 --- a/include/led.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * (C) Copyright 2006 - * Atmel Nordic AB <www.atmel.com> - * Ulf Samuelsson <ulf@atmel.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __LED_H -#define __LED_H - -#ifndef __ASSEMBLY__ -extern void LED_init (void); -extern void red_LED_on(void); -extern void red_LED_off(void); -extern void green_LED_on(void); -extern void green_LED_off(void); -extern void yellow_LED_on(void); -extern void yellow_LED_off(void); -#else - .extern LED_init - .extern red_LED_on - .extern red_LED_off - .extern yellow_LED_on - .extern yellow_LED_off - .extern green_LED_on - .extern green_LED_off -#endif -#endif diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h new file mode 100644 index 000000000..f194cf1b3 --- /dev/null +++ b/include/linux/mtd/bbm.h @@ -0,0 +1,127 @@ +/* + * linux/include/linux/mtd/bbm.h + * + * NAND family Bad Block Management (BBM) header file + * - Bad Block Table (BBT) implementation + * + * Copyright (c) 2005-2007 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * Copyright (c) 2000-2005 + * Thomas Gleixner <tglx@linuxtronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_MTD_BBM_H +#define __LINUX_MTD_BBM_H + +/* The maximum number of NAND chips in an array */ +#ifndef NAND_MAX_CHIPS +#define NAND_MAX_CHIPS 8 +#endif + +/** + * struct nand_bbt_descr - bad block table descriptor + * @param options options for this descriptor + * @param pages the page(s) where we find the bbt, used with + * option BBT_ABSPAGE when bbt is searched, + * then we store the found bbts pages here. + * Its an array and supports up to 8 chips now + * @param offs offset of the pattern in the oob area of the page + * @param veroffs offset of the bbt version counter in the oob are of the page + * @param version version read from the bbt page during scan + * @param len length of the pattern, if 0 no pattern check is performed + * @param maxblocks maximum number of blocks to search for a bbt. This number of + * blocks is reserved at the end of the device + * where the tables are written. + * @param reserved_block_code if non-0, this pattern denotes a reserved + * (rather than bad) block in the stored bbt + * @param pattern pattern to identify bad block table or factory marked + * good / bad blocks, can be NULL, if len = 0 + * + * Descriptor for the bad block table marker and the descriptor for the + * pattern which identifies good and bad blocks. The assumption is made + * that the pattern and the version count are always located in the oob area + * of the first block. + */ +struct nand_bbt_descr { + int options; + int pages[NAND_MAX_CHIPS]; + int offs; + int veroffs; + uint8_t version[NAND_MAX_CHIPS]; + int len; + int maxblocks; + int reserved_block_code; + uint8_t *pattern; +}; + +/* Options for the bad block table descriptors */ + +/* The number of bits used per block in the bbt on the device */ +#define NAND_BBT_NRBITS_MSK 0x0000000F +#define NAND_BBT_1BIT 0x00000001 +#define NAND_BBT_2BIT 0x00000002 +#define NAND_BBT_4BIT 0x00000004 +#define NAND_BBT_8BIT 0x00000008 +/* The bad block table is in the last good block of the device */ +#define NAND_BBT_LASTBLOCK 0x00000010 +/* The bbt is at the given page, else we must scan for the bbt */ +#define NAND_BBT_ABSPAGE 0x00000020 +/* The bbt is at the given page, else we must scan for the bbt */ +#define NAND_BBT_SEARCH 0x00000040 +/* bbt is stored per chip on multichip devices */ +#define NAND_BBT_PERCHIP 0x00000080 +/* bbt has a version counter at offset veroffs */ +#define NAND_BBT_VERSION 0x00000100 +/* Create a bbt if none axists */ +#define NAND_BBT_CREATE 0x00000200 +/* Search good / bad pattern through all pages of a block */ +#define NAND_BBT_SCANALLPAGES 0x00000400 +/* Scan block empty during good / bad block scan */ +#define NAND_BBT_SCANEMPTY 0x00000800 +/* Write bbt if neccecary */ +#define NAND_BBT_WRITE 0x00001000 +/* Read and write back block contents when writing bbt */ +#define NAND_BBT_SAVECONTENT 0x00002000 +/* Search good / bad pattern on the first and the second page */ +#define NAND_BBT_SCAN2NDPAGE 0x00004000 + +/* The maximum number of blocks to scan for a bbt */ +#define NAND_BBT_SCAN_MAXBLOCKS 4 + +/* + * Constants for oob configuration + */ +#define ONENAND_BADBLOCK_POS 0 + +/** + * struct bbt_info - [GENERIC] Bad Block Table data structure + * @param bbt_erase_shift [INTERN] number of address bits in a bbt entry + * @param badblockpos [INTERN] position of the bad block marker in the oob area + * @param bbt [INTERN] bad block table pointer + * @param badblock_pattern [REPLACEABLE] bad block scan pattern used for initial bad block scan + * @param priv [OPTIONAL] pointer to private bbm date + */ +struct bbm_info { + int bbt_erase_shift; + int badblockpos; + int options; + + uint8_t *bbt; + + int (*isbad_bbt) (struct mtd_info * mtd, loff_t ofs, int allowbbt); + + /* TODO Add more NAND specific fileds */ + struct nand_bbt_descr *badblock_pattern; + + void *priv; +}; + +/* OneNAND BBT interface */ +extern int onenand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd); +extern int onenand_default_bbt (struct mtd_info *mtd); + +#endif /* __LINUX_MTD_BBM_H */ diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h new file mode 100644 index 000000000..4b0c2dfaa --- /dev/null +++ b/include/linux/mtd/onenand.h @@ -0,0 +1,143 @@ +/* + * linux/include/linux/mtd/onenand.h + * + * Copyright (C) 2005-2007 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MTD_ONENAND_H +#define __LINUX_MTD_ONENAND_H + +#include <linux/mtd/onenand_regs.h> + +/* Note: The header order is impoertant */ +#include <onenand_uboot.h> + +#include <linux/mtd/bbm.h> + +#define MAX_BUFFERRAM 2 +#define MAX_ONENAND_PAGESIZE (2048 + 64) + +/* Scan and identify a OneNAND device */ +extern int onenand_scan (struct mtd_info *mtd, int max_chips); +/* Free resources held by the OneNAND device */ +extern void onenand_release (struct mtd_info *mtd); + +/** + * onenand_state_t - chip states + * Enumeration for OneNAND flash chip state + */ +typedef enum { + FL_READY, + FL_READING, + FL_WRITING, + FL_ERASING, + FL_SYNCING, + FL_UNLOCKING, + FL_LOCKING, +} onenand_state_t; + +/** + * struct onenand_bufferram - OneNAND BufferRAM Data + * @param block block address in BufferRAM + * @param page page address in BufferRAM + * @param valid valid flag + */ +struct onenand_bufferram { + int block; + int page; + int valid; +}; + +/** + * struct onenand_chip - OneNAND Private Flash Chip Data + * @param base [BOARDSPECIFIC] address to access OneNAND + * @param chipsize [INTERN] the size of one chip for multichip arrays + * @param device_id [INTERN] device ID + * @param verstion_id [INTERN] version ID + * @param options [BOARDSPECIFIC] various chip options. They can partly be set to inform onenand_scan about + * @param erase_shift [INTERN] number of address bits in a block + * @param page_shift [INTERN] number of address bits in a page + * @param ppb_shift [INTERN] number of address bits in a pages per block + * @param page_mask [INTERN] a page per block mask + * @param bufferam_index [INTERN] BufferRAM index + * @param bufferam [INTERN] BufferRAM info + * @param readw [REPLACEABLE] hardware specific function for read short + * @param writew [REPLACEABLE] hardware specific function for write short + * @param command [REPLACEABLE] hardware specific function for writing commands to the chip + * @param wait [REPLACEABLE] hardware specific function for wait on ready + * @param read_bufferram [REPLACEABLE] hardware specific function for BufferRAM Area + * @param write_bufferram [REPLACEABLE] hardware specific function for BufferRAM Area + * @param chip_lock [INTERN] spinlock used to protect access to this structure and the chip + * @param wq [INTERN] wait queue to sleep on if a OneNAND operation is in progress + * @param state [INTERN] the current state of the OneNAND device + * @param autooob [REPLACEABLE] the default (auto)placement scheme + * @param priv [OPTIONAL] pointer to private chip date + */ +struct onenand_chip { + void __iomem *base; + unsigned int chipsize; + unsigned int device_id; + unsigned int options; + + unsigned int erase_shift; + unsigned int page_shift; + unsigned int ppb_shift; /* Pages per block shift */ + unsigned int page_mask; + + unsigned int bufferram_index; + struct onenand_bufferram bufferram[MAX_BUFFERRAM]; + + int (*command) (struct mtd_info * mtd, int cmd, loff_t address, + size_t len); + int (*wait) (struct mtd_info * mtd, int state); + int (*read_bufferram) (struct mtd_info * mtd, int area, + unsigned char *buffer, int offset, size_t count); + int (*write_bufferram) (struct mtd_info * mtd, int area, + const unsigned char *buffer, int offset, + size_t count); + unsigned short (*read_word) (void __iomem * addr); + void (*write_word) (unsigned short value, void __iomem * addr); + void (*mmcontrol) (struct mtd_info * mtd, int sync_read); + + spinlock_t chip_lock; + wait_queue_head_t wq; + onenand_state_t state; + + struct nand_oobinfo *autooob; + + void *bbm; + + void *priv; +}; + +#define ONENAND_CURRENT_BUFFERRAM(this) (this->bufferram_index) +#define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1) +#define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1) + +/* + * Options bits + */ +#define ONENAND_CONT_LOCK (0x0001) + +/* + * OneNAND Flash Manufacturer ID Codes + */ +#define ONENAND_MFR_SAMSUNG 0xec +#define ONENAND_MFR_UNKNOWN 0x00 + +/** + * struct nand_manufacturers - NAND Flash Manufacturer ID Structure + * @param name: Manufacturer name + * @param id: manufacturer ID code of device. +*/ +struct onenand_manufacturers { + int id; + char *name; +}; + +#endif /* __LINUX_MTD_ONENAND_H */ diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h new file mode 100644 index 000000000..c8a9f3e90 --- /dev/null +++ b/include/linux/mtd/onenand_regs.h @@ -0,0 +1,181 @@ +/* + * linux/include/linux/mtd/onenand_regs.h + * + * OneNAND Register header file + * + * Copyright (C) 2005-2007 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ONENAND_REG_H +#define __ONENAND_REG_H + +/* Memory Address Map Translation (Word order) */ +#define ONENAND_MEMORY_MAP(x) ((x) << 1) + +/* + * External BufferRAM area + */ +#define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000) +#define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200) +#define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010) + +/* + * OneNAND Registers + */ +#define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000) +#define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001) +#define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002) +#define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003) +#define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004) +#define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005) +#define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006) + +#define ONENAND_REG_START_ADDRESS1 ONENAND_MEMORY_MAP(0xF100) +#define ONENAND_REG_START_ADDRESS2 ONENAND_MEMORY_MAP(0xF101) +#define ONENAND_REG_START_ADDRESS3 ONENAND_MEMORY_MAP(0xF102) +#define ONENAND_REG_START_ADDRESS4 ONENAND_MEMORY_MAP(0xF103) +#define ONENAND_REG_START_ADDRESS5 ONENAND_MEMORY_MAP(0xF104) +#define ONENAND_REG_START_ADDRESS6 ONENAND_MEMORY_MAP(0xF105) +#define ONENAND_REG_START_ADDRESS7 ONENAND_MEMORY_MAP(0xF106) +#define ONENAND_REG_START_ADDRESS8 ONENAND_MEMORY_MAP(0xF107) + +#define ONENAND_REG_START_BUFFER ONENAND_MEMORY_MAP(0xF200) +#define ONENAND_REG_COMMAND ONENAND_MEMORY_MAP(0xF220) +#define ONENAND_REG_SYS_CFG1 ONENAND_MEMORY_MAP(0xF221) +#define ONENAND_REG_SYS_CFG2 ONENAND_MEMORY_MAP(0xF222) +#define ONENAND_REG_CTRL_STATUS ONENAND_MEMORY_MAP(0xF240) +#define ONENAND_REG_INTERRUPT ONENAND_MEMORY_MAP(0xF241) +#define ONENAND_REG_START_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24C) +#define ONENAND_REG_END_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24D) +#define ONENAND_REG_WP_STATUS ONENAND_MEMORY_MAP(0xF24E) + +#define ONENAND_REG_ECC_STATUS ONENAND_MEMORY_MAP(0xFF00) +#define ONENAND_REG_ECC_M0 ONENAND_MEMORY_MAP(0xFF01) +#define ONENAND_REG_ECC_S0 ONENAND_MEMORY_MAP(0xFF02) +#define ONENAND_REG_ECC_M1 ONENAND_MEMORY_MAP(0xFF03) +#define ONENAND_REG_ECC_S1 ONENAND_MEMORY_MAP(0xFF04) +#define ONENAND_REG_ECC_M2 ONENAND_MEMORY_MAP(0xFF05) +#define ONENAND_REG_ECC_S2 ONENAND_MEMORY_MAP(0xFF06) +#define ONENAND_REG_ECC_M3 ONENAND_MEMORY_MAP(0xFF07) +#define ONENAND_REG_ECC_S3 ONENAND_MEMORY_MAP(0xFF08) + +/* + * Device ID Register F001h (R) + */ +#define ONENAND_DEVICE_DENSITY_SHIFT (4) +#define ONENAND_DEVICE_IS_DDP (1 << 3) +#define ONENAND_DEVICE_IS_DEMUX (1 << 2) +#define ONENAND_DEVICE_VCC_MASK (0x3) + +#define ONENAND_DEVICE_DENSITY_512Mb (0x002) + +/* + * Version ID Register F002h (R) + */ +#define ONENAND_VERSION_PROCESS_SHIFT (8) + +/* + * Start Address 1 F100h (R/W) + */ +#define ONENAND_DDP_SHIFT (15) + +/* + * Start Address 8 F107h (R/W) + */ +#define ONENAND_FPA_MASK (0x3f) +#define ONENAND_FPA_SHIFT (2) +#define ONENAND_FSA_MASK (0x03) + +/* + * Start Buffer Register F200h (R/W) + */ +#define ONENAND_BSA_MASK (0x03) +#define ONENAND_BSA_SHIFT (8) +#define ONENAND_BSA_BOOTRAM (0 << 2) +#define ONENAND_BSA_DATARAM0 (2 << 2) +#define ONENAND_BSA_DATARAM1 (3 << 2) +#define ONENAND_BSC_MASK (0x03) + +/* + * Command Register F220h (R/W) + */ +#define ONENAND_CMD_READ (0x00) +#define ONENAND_CMD_READOOB (0x13) +#define ONENAND_CMD_PROG (0x80) +#define ONENAND_CMD_PROGOOB (0x1A) +#define ONENAND_CMD_UNLOCK (0x23) +#define ONENAND_CMD_LOCK (0x2A) +#define ONENAND_CMD_LOCK_TIGHT (0x2C) +#define ONENAND_CMD_ERASE (0x94) +#define ONENAND_CMD_RESET (0xF0) +#define ONENAND_CMD_READID (0x90) + +/* NOTE: Those are not *REAL* commands */ +#define ONENAND_CMD_BUFFERRAM (0x1978) + +/* + * System Configuration 1 Register F221h (R, R/W) + */ +#define ONENAND_SYS_CFG1_SYNC_READ (1 << 15) +#define ONENAND_SYS_CFG1_BRL_7 (7 << 12) +#define ONENAND_SYS_CFG1_BRL_6 (6 << 12) +#define ONENAND_SYS_CFG1_BRL_5 (5 << 12) +#define ONENAND_SYS_CFG1_BRL_4 (4 << 12) +#define ONENAND_SYS_CFG1_BRL_3 (3 << 12) +#define ONENAND_SYS_CFG1_BRL_10 (2 << 12) +#define ONENAND_SYS_CFG1_BRL_9 (1 << 12) +#define ONENAND_SYS_CFG1_BRL_8 (0 << 12) +#define ONENAND_SYS_CFG1_BRL_SHIFT (12) +#define ONENAND_SYS_CFG1_BL_32 (4 << 9) +#define ONENAND_SYS_CFG1_BL_16 (3 << 9) +#define ONENAND_SYS_CFG1_BL_8 (2 << 9) +#define ONENAND_SYS_CFG1_BL_4 (1 << 9) +#define ONENAND_SYS_CFG1_BL_CONT (0 << 9) +#define ONENAND_SYS_CFG1_BL_SHIFT (9) +#define ONENAND_SYS_CFG1_NO_ECC (1 << 8) +#define ONENAND_SYS_CFG1_RDY (1 << 7) +#define ONENAND_SYS_CFG1_INT (1 << 6) +#define ONENAND_SYS_CFG1_IOBE (1 << 5) +#define ONENAND_SYS_CFG1_RDY_CONF (1 << 4) + +/* + * Controller Status Register F240h (R) + */ +#define ONENAND_CTRL_ONGO (1 << 15) +#define ONENAND_CTRL_LOCK (1 << 14) +#define ONENAND_CTRL_LOAD (1 << 13) +#define ONENAND_CTRL_PROGRAM (1 << 12) +#define ONENAND_CTRL_ERASE (1 << 11) +#define ONENAND_CTRL_ERROR (1 << 10) +#define ONENAND_CTRL_RSTB (1 << 7) + +/* + * Interrupt Status Register F241h (R) + */ +#define ONENAND_INT_MASTER (1 << 15) +#define ONENAND_INT_READ (1 << 7) +#define ONENAND_INT_WRITE (1 << 6) +#define ONENAND_INT_ERASE (1 << 5) +#define ONENAND_INT_RESET (1 << 4) +#define ONENAND_INT_CLEAR (0 << 0) + +/* + * NAND Flash Write Protection Status Register F24Eh (R) + */ +#define ONENAND_WP_US (1 << 2) +#define ONENAND_WP_LS (1 << 1) +#define ONENAND_WP_LTS (1 << 0) + +/* + * ECC Status Reigser FF00h (R) + */ +#define ONENAND_ECC_1BIT (1 << 0) +#define ONENAND_ECC_2BIT (1 << 1) +#define ONENAND_ECC_2BIT_ALL (0xAAAA) + +#endif /* __ONENAND_REG_H */ diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h new file mode 100644 index 000000000..bd1831ea6 --- /dev/null +++ b/include/onenand_uboot.h @@ -0,0 +1,39 @@ +/* + * Header file for OneNAND support for U-Boot + * + * Adaptation from kernel to U-Boot + * + * Copyright (C) 2005-2007 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __UBOOT_ONENAND_H +#define __UBOOT_ONENAND_H + +struct kvec { + void *iov_base; + size_t iov_len; +}; + +typedef int spinlock_t; +typedef int wait_queue_head_t; + +/* Functions */ +extern void onenand_init(void); +extern int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf); +extern int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf); +extern int onenand_write(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, const u_char * buf); +extern int onenand_erase(struct mtd_info *mtd, struct erase_info *instr); + +extern int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len); + +extern void onenand_print_device_info(int device, int verbose); + +#endif /* __UBOOT_ONENAND_H */ diff --git a/include/status_led.h b/include/status_led.h index a64681425..d12bb67c2 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -383,6 +383,27 @@ extern void __led_set (led_id_t mask, int state); # include <asm/status_led.h> #endif +/* + * Coloured LEDs API + */ +#ifndef __ASSEMBLY__ +extern void coloured_LED_init (void); +extern void red_LED_on(void); +extern void red_LED_off(void); +extern void green_LED_on(void); +extern void green_LED_off(void); +extern void yellow_LED_on(void); +extern void yellow_LED_off(void); +#else + .extern LED_init + .extern red_LED_on + .extern red_LED_off + .extern yellow_LED_on + .extern yellow_LED_off + .extern green_LED_on + .extern green_LED_off +#endif + #endif /* CONFIG_STATUS_LED */ #endif /* _STATUS_LED_H_ */ diff --git a/lib_arm/board.c b/lib_arm/board.c index d28afc52f..7e97f1347 100644 --- a/lib_arm/board.c +++ b/lib_arm/board.c @@ -58,6 +58,10 @@ DECLARE_GLOBAL_DATA_PTR; void nand_init (void); #endif +#if defined(CONFIG_CMD_ONENAND) +void onenand_init(void); +#endif + ulong monitor_flash_len; #ifdef CONFIG_HAS_DATAFLASH @@ -112,6 +116,26 @@ void *sbrk (ptrdiff_t increment) } /************************************************************************ + * Coloured LED functionality + ************************************************************************ + * May be supplied by boards if desired + */ +void inline __coloured_LED_init (void) {} +void inline coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init"))); +void inline __red_LED_on (void) {} +void inline red_LED_on (void) __attribute__((weak, alias("__red_LED_on"))); +void inline __red_LED_off(void) {} +void inline red_LED_off(void) __attribute__((weak, alias("__red_LED_off"))); +void inline __green_LED_on(void) {} +void inline green_LED_on(void) __attribute__((weak, alias("__green_LED_on"))); +void inline __green_LED_off(void) {} +void inline green_LED_off(void)__attribute__((weak, alias("__green_LED_off"))); +void inline __yellow_LED_on(void) {} +void inline yellow_LED_on(void)__attribute__((weak, alias("__yellow_LED_on"))); +void inline __yellow_LED_off(void) {} +void inline yellow_LED_off(void)__attribute__((weak, alias("__yellow_LED_off"))); + +/************************************************************************ * Init Utilities * ************************************************************************ * Some of this code should be moved into the core functions, @@ -185,7 +209,6 @@ static void display_flash_config (ulong size) } #endif /* CFG_NO_FLASH */ - /* * Breathe some life into the board... * @@ -301,6 +324,10 @@ void start_armboot (void) nand_init(); /* go init the NAND */ #endif +#if defined(CONFIG_CMD_ONENAND) + onenand_init(); +#endif + #ifdef CONFIG_HAS_DATAFLASH AT91F_DataflashInit(); dataflash_print_info(); diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c index 3fa1b1126..b5d8f1937 100644 --- a/lib_microblaze/time.c +++ b/lib_microblaze/time.c @@ -26,9 +26,17 @@ #include <common.h> +#ifdef CFG_TIMER_0 void udelay (unsigned long usec) { int i; i = get_timer (0); while ((get_timer (0) - i) < (usec / 1000)) ; } +#else +void udelay (unsigned long usec) +{ + unsigned int i; + for (i = 0; i < (usec * CONFIG_XILINX_CLOCK_FREQ / 10000000); i++); +} +#endif |