aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--common/cmd_mfsl.c16
-rw-r--r--cpu/microblaze/cache.c2
-rw-r--r--cpu/microblaze/start.S6
-rw-r--r--cpu/microblaze/timer.c7
-rw-r--r--drivers/serial_xuartlite.c2
-rw-r--r--include/configs/ml401.h53
-rw-r--r--include/configs/suzaku.h19
-rw-r--r--include/configs/xupv2p.h3
-rw-r--r--lib_microblaze/time.c8
9 files changed, 64 insertions, 52 deletions
diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c
index 8d4c1a38d..9d1d87551 100644
--- a/common/cmd_mfsl.c
+++ b/common/cmd_mfsl.c
@@ -355,19 +355,18 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
unsigned int reg = 0;
unsigned int val = 0;
- reg = (unsigned int)simple_strtoul (argv[1], NULL, 16);
- val = (unsigned int)simple_strtoul (argv[2], NULL, 16);
- if (argc < 1) {
+ if (argc < 2) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
+ reg = (unsigned int)simple_strtoul (argv[1], NULL, 16);
+ val = (unsigned int)simple_strtoul (argv[2], NULL, 16);
switch (reg) {
case 0x1:
if (argc > 2) {
MTS (val, rmsr);
NOP;
MFS (val, rmsr);
-
} else {
MFS (val, rmsr);
}
@@ -382,6 +381,7 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
puts ("ESR");
break;
default:
+ puts ("Unsupported register\n");
return 1;
}
printf (": 0x%08lx\n", val);
@@ -408,10 +408,10 @@ U_BOOT_CMD (fwr, 4, 1, do_fwr,
" 3 - blocking control write\n");
U_BOOT_CMD (rspr, 3, 1, do_rspr,
- "rmsr - read/write special purpose register\n",
+ "rspr - read/write special purpose register\n",
"- reg_num [write value] read/write special purpose register\n"
- " 0 - MSR - Machine status register\n"
- " 1 - EAR - Exception address register\n"
- " 2 - ESR - Exception status register\n");
+ " 1 - MSR - Machine status register\n"
+ " 3 - EAR - Exception address register\n"
+ " 5 - ESR - Exception status register\n");
#endif
diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c
index 6ce0b55b2..4b7866fae 100644
--- a/cpu/microblaze/cache.c
+++ b/cpu/microblaze/cache.c
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2007 Michal Simek
*
- * Michal SIMEK <moonstr@monstr.eu>
+ * Michal SIMEK <monstr@monstr.eu>
*
* See file CREDITS for list of people who contributed to this
* project.
diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S
index 3c027ff9b..8740284ad 100644
--- a/cpu/microblaze/start.S
+++ b/cpu/microblaze/start.S
@@ -33,15 +33,13 @@ _start:
addi r1, r0, CFG_INIT_SP_OFFSET
addi r1, r1, -4 /* Decrement SP to top of memory */
/* add opcode instruction for 32bit jump - 2 instruction imm & brai*/
- addi r6, r0, 0xb000 /* hex b000 opcode imm */
- bslli r6, r6, 16 /* shift */
+ addi r6, r0, 0xb0000000 /* hex b000 opcode imm */
swi r6, r0, 0x0 /* reset address */
swi r6, r0, 0x8 /* user vector exception */
swi r6, r0, 0x10 /* interrupt */
swi r6, r0, 0x20 /* hardware exception */
- addi r6, r0, 0xb808 /* hew b808 opcode brai*/
- bslli r6, r6, 16
+ addi r6, r0, 0xb8080000 /* hew b808 opcode brai*/
swi r6, r0, 0x4 /* reset address */
swi r6, r0, 0xC /* user vector exception */
swi r6, r0, 0x14 /* interrupt */
diff --git a/cpu/microblaze/timer.c b/cpu/microblaze/timer.c
index ab1cb1274..b35045344 100644
--- a/cpu/microblaze/timer.c
+++ b/cpu/microblaze/timer.c
@@ -33,10 +33,17 @@ void reset_timer (void)
timestamp = 0;
}
+#ifdef CFG_TIMER_0
ulong get_timer (ulong base)
{
return (timestamp - base);
}
+#else
+ulong get_timer (ulong base)
+{
+ return (timestamp++ - base);
+}
+#endif
void set_timer (ulong t)
{
diff --git a/drivers/serial_xuartlite.c b/drivers/serial_xuartlite.c
index ed59abea8..d678ab6b7 100644
--- a/drivers/serial_xuartlite.c
+++ b/drivers/serial_xuartlite.c
@@ -24,7 +24,7 @@
#include <config.h>
-#ifdef CONFIG_MICROBLAZE
+#ifdef CONFIG_XILINX_UARTLITE
#include <asm/serial_xuartlite.h>
diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 7eeae708a..b32043850 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -1,7 +1,7 @@
/*
- * (C) Copyright 2007 Czech Technical University.
+ * (C) Copyright 2007 Michal Simek
*
- * Michal SIMEK <monstr@seznam.cz>
+ * Michal SIMEK <monstr@monstr.eu>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -32,6 +32,7 @@
#define CONFIG_ML401 1 /* ML401 Board */
/* uart */
+#define CONFIG_XILINX_UARTLITE
#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
@@ -58,6 +59,7 @@
#define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ
#define FREQUENCE XILINX_CLOCK_FREQ
#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 )
+#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
/* FSL */
#define CFG_FSL_2
@@ -86,7 +88,7 @@
* 0x11FB_F000 CFG_MONITOR_BASE
* MONITOR_CODE 256kB Env
* 0x13FF_F000 CFG_GBL_DATA_OFFSET
- * GLOBAL_DATA 4kB bd, gd
+ * GLOBAL_DATA 4kB bd, gd
* 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE
*/
@@ -99,7 +101,7 @@
/* global pointer */
#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */
/* start of global data */
-#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
/* monitor code */
#define SIZE 0x40000
@@ -145,6 +147,16 @@
#define CFG_FLASH_PROTECTION /* hardware flash protection */
#endif /* !FLASH */
+/* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
+ #define CONFIG_SYSTEMACE
+ /* #define DEBUG_SYSTEMACE */
+ #define SYSTEMACE_CONFIG_FPGA
+ #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+ #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
+ #define CONFIG_DOS_PARTITION
+#endif
+
/*
* BOOTP options
*/
@@ -153,28 +165,21 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BDI
#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IMI
#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
#define CONFIG_CMD_MFSL
-#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
+
+#if defined(CONFIG_SYSTEMACE)
+ #define CONFIG_CMD_EXT2
+ #define CONFIG_CMD_FAT
+#endif
#if defined(FLASH)
#define CONFIG_CMD_ECHO
@@ -186,6 +191,8 @@
#define CONFIG_CMD_ENV
#define CONFIG_CMD_SAVES
#endif
+#else
+ #undef CONFIG_CMD_FLASH
#endif
#if defined(CONFIG_CMD_JFFS2)
@@ -210,24 +217,16 @@
#define CONFIG_BOOTDELAY 30
#define CONFIG_BOOTARGS "root=romfs"
#define CONFIG_HOSTNAME "ml401"
-#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
+#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
-#define CONFIG_SERVERIP 192.168.0.5
-#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.5
+#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
/* architecture dependent code */
#define CFG_USR_EXCEP /* user exception */
#define CFG_HZ 1000
-/* system ace */
-#define CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-#define SYSTEMACE_CONFIG_FPGA
-#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
-#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo"
#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 08ac9cbd5..020ed0230 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -48,6 +48,7 @@
#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - (1024 * 1024))
+#define CONFIG_XILINX_UARTLITE
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 115200 }
@@ -55,21 +56,16 @@
#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_MEMORY
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_MISC
#define CFG_UART1_BASE (0xFFFF2000)
#define CONFIG_SERIAL_BASE CFG_UART1_BASE
@@ -108,4 +104,7 @@
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define XILINX_CLOCK_FREQ 50000000
+#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
+
#endif /* __CONFIG_H */
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index 35001d7ad..b1c0ee666 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007 Czech Technical University.
+ * (C) Copyright 2007 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*
@@ -31,6 +31,7 @@
#define CONFIG_XUPV2P 1
/* uart */
+#define CONFIG_XILINX_UARTLITE
#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c
index 3fa1b1126..b5d8f1937 100644
--- a/lib_microblaze/time.c
+++ b/lib_microblaze/time.c
@@ -26,9 +26,17 @@
#include <common.h>
+#ifdef CFG_TIMER_0
void udelay (unsigned long usec)
{
int i;
i = get_timer (0);
while ((get_timer (0) - i) < (usec / 1000)) ;
}
+#else
+void udelay (unsigned long usec)
+{
+ unsigned int i;
+ for (i = 0; i < (usec * CONFIG_XILINX_CLOCK_FREQ / 10000000); i++);
+}
+#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-01 22:10:38 +0000