aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile2
-rw-r--r--README37
-rw-r--r--arch/powerpc/cpu/mpc83xx/Makefile20
-rw-r--r--arch/powerpc/cpu/mpc83xx/ecc.c18
-rw-r--r--arch/powerpc/cpu/mpc83xx/law.c61
-rw-r--r--arch/powerpc/cpu/mpc83xx/speed.c9
-rw-r--r--arch/powerpc/cpu/mpc85xx/Makefile3
-rw-r--r--arch/powerpc/cpu/mpc85xx/cmd_errata.c16
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu.c12
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu_init.c19
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu_init_early.c149
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu_init_nand.c12
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen2.c28
-rw-r--r--arch/powerpc/cpu/mpc85xx/fdt.c4
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c9
-rw-r--r--arch/powerpc/cpu/mpc85xx/liodn.c25
-rw-r--r--arch/powerpc/cpu/mpc85xx/mp.c27
-rw-r--r--arch/powerpc/cpu/mpc85xx/p3060_ids.c113
-rw-r--r--arch/powerpc/cpu/mpc85xx/p3060_serdes.c138
-rw-r--r--arch/powerpc/cpu/mpc85xx/p5020_ids.c13
-rw-r--r--arch/powerpc/cpu/mpc85xx/portals.c7
-rw-r--r--arch/powerpc/cpu/mpc85xx/speed.c7
-rw-r--r--arch/powerpc/cpu/mpc85xx/start.S289
-rw-r--r--arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds18
-rw-r--r--arch/powerpc/cpu/mpc8xxx/cpu.c42
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c41
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c3
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/main.c11
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/options.c259
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/util.c35
-rw-r--r--arch/powerpc/cpu/mpc8xxx/fdt.c2
-rw-r--r--arch/powerpc/cpu/mpc8xxx/fsl_ifc.c2
-rw-r--r--arch/powerpc/include/asm/config.h10
-rw-r--r--arch/powerpc/include/asm/config_mpc85xx.h69
-rw-r--r--arch/powerpc/include/asm/fsl_ddr_sdram.h9
-rw-r--r--arch/powerpc/include/asm/fsl_dtsec.h244
-rw-r--r--arch/powerpc/include/asm/fsl_fman.h257
-rw-r--r--arch/powerpc/include/asm/fsl_ifc.h11
-rw-r--r--arch/powerpc/include/asm/fsl_liodn.h11
-rw-r--r--arch/powerpc/include/asm/fsl_portals.h3
-rw-r--r--arch/powerpc/include/asm/fsl_secure_boot.h43
-rw-r--r--arch/powerpc/include/asm/fsl_tgec.h215
-rw-r--r--arch/powerpc/include/asm/immap_83xx.h117
-rw-r--r--arch/powerpc/include/asm/immap_85xx.h58
-rw-r--r--arch/powerpc/include/asm/processor.h12
-rw-r--r--board/freescale/common/Makefile15
-rw-r--r--board/freescale/common/cadmus.c8
-rw-r--r--board/freescale/common/fman.c67
-rw-r--r--board/freescale/common/fman.h (renamed from board/freescale/p2041rdb/pci.c)23
-rw-r--r--board/freescale/common/p_corenet/Makefile31
-rw-r--r--board/freescale/common/p_corenet/law.c (renamed from board/freescale/corenet_ds/law.c)5
-rw-r--r--board/freescale/common/p_corenet/pci.c (renamed from board/freescale/corenet_ds/pci.c)0
-rw-r--r--board/freescale/common/p_corenet/tlb.c (renamed from board/freescale/corenet_ds/tlb.c)37
-rw-r--r--board/freescale/corenet_ds/Makefile6
-rw-r--r--board/freescale/corenet_ds/corenet_ds.c12
-rw-r--r--board/freescale/corenet_ds/corenet_ds.h26
-rw-r--r--board/freescale/corenet_ds/ddr.c117
-rw-r--r--board/freescale/corenet_ds/eth_hydra.c553
-rw-r--r--board/freescale/corenet_ds/eth_p4080.c506
-rw-r--r--board/freescale/mpc8349emds/Makefile1
-rw-r--r--board/freescale/mpc8349emds/ddr.c107
-rw-r--r--board/freescale/mpc8349emds/mpc8349emds.c26
-rw-r--r--board/freescale/mpc8541cds/mpc8541cds.c6
-rw-r--r--board/freescale/mpc8548cds/mpc8548cds.c17
-rw-r--r--board/freescale/mpc8555cds/mpc8555cds.c6
-rw-r--r--board/freescale/p1010rdb/Makefile52
-rw-r--r--board/freescale/p1010rdb/ddr.c250
-rw-r--r--board/freescale/p1010rdb/law.c35
-rw-r--r--board/freescale/p1010rdb/p1010rdb.c330
-rw-r--r--board/freescale/p1010rdb/tlb.c98
-rw-r--r--board/freescale/p1023rds/p1023rds.c40
-rw-r--r--board/freescale/p1_p2_rdb_pc/Makefile52
-rw-r--r--board/freescale/p1_p2_rdb_pc/ddr.c292
-rw-r--r--board/freescale/p1_p2_rdb_pc/law.c (renamed from board/freescale/p2041rdb/law.c)16
-rw-r--r--board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c449
-rw-r--r--board/freescale/p1_p2_rdb_pc/tlb.c114
-rw-r--r--board/freescale/p2041rdb/Makefile4
-rw-r--r--board/freescale/p2041rdb/cpld.c43
-rw-r--r--board/freescale/p2041rdb/cpld.h7
-rw-r--r--board/freescale/p2041rdb/ddr.c5
-rw-r--r--board/freescale/p2041rdb/eth.c225
-rw-r--r--board/freescale/p2041rdb/p2041rdb.c18
-rw-r--r--board/freescale/p2041rdb/tlb.c119
-rw-r--r--boards.cfg59
-rw-r--r--common/Makefile8
-rw-r--r--common/cmd_mp.c5
-rw-r--r--common/fdt_support.c26
-rw-r--r--doc/README.fsl-ddr52
-rw-r--r--doc/README.p1_p2_rdb_pc46
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c850
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/fm/Makefile62
-rw-r--r--drivers/net/fm/dtsec.c181
-rw-r--r--drivers/net/fm/eth.c670
-rw-r--r--drivers/net/fm/fm.c432
-rw-r--r--drivers/net/fm/fm.h155
-rw-r--r--drivers/net/fm/init.c216
-rw-r--r--drivers/net/fm/p1023.c74
-rw-r--r--drivers/net/fm/p3060.c109
-rw-r--r--drivers/net/fm/p4080.c100
-rw-r--r--drivers/net/fm/p5020.c91
-rw-r--r--drivers/net/fm/tgec.c119
-rw-r--r--drivers/net/fm/tgec_phy.c139
-rw-r--r--drivers/usb/host/ehci-fsl.c39
-rw-r--r--include/common.h19
-rw-r--r--include/configs/MPC8349EMDS.h16
-rw-r--r--include/configs/MPC8536DS.h17
-rw-r--r--include/configs/MPC8540ADS.h11
-rw-r--r--include/configs/MPC8541CDS.h10
-rw-r--r--include/configs/MPC8544DS.h10
-rw-r--r--include/configs/MPC8548CDS.h10
-rw-r--r--include/configs/MPC8555CDS.h10
-rw-r--r--include/configs/MPC8560ADS.h11
-rw-r--r--include/configs/MPC8568MDS.h10
-rw-r--r--include/configs/MPC8569MDS.h15
-rw-r--r--include/configs/MPC8572DS.h17
-rw-r--r--include/configs/P1010RDB.h776
-rw-r--r--include/configs/P1022DS.h14
-rw-r--r--include/configs/P1023RDS.h11
-rw-r--r--include/configs/P1_P2_RDB.h24
-rw-r--r--include/configs/P2020DS.h14
-rw-r--r--include/configs/P2041RDB.h25
-rw-r--r--include/configs/P3041DS.h5
-rw-r--r--include/configs/P4080DS.h5
-rw-r--r--include/configs/P5020DS.h6
-rw-r--r--include/configs/SBC8540.h14
-rw-r--r--include/configs/TQM85xx.h16
-rw-r--r--include/configs/corenet_ds.h31
-rw-r--r--include/configs/mpq101.h16
-rw-r--r--include/configs/p1_p2_rdb_pc.h984
-rw-r--r--include/configs/sbc8548.h10
-rw-r--r--include/configs/sbc8560.h14
-rw-r--r--include/configs/socrates.h10
-rw-r--r--include/configs/stxgp3.h7
-rw-r--r--include/configs/stxssa.h8
-rw-r--r--include/configs/xpedite520x.h10
-rw-r--r--include/configs/xpedite537x.h10
-rw-r--r--include/configs/xpedite550x.h10
-rw-r--r--include/fdt_support.h3
-rw-r--r--include/fm_eth.h115
-rw-r--r--include/mpc85xx.h42
-rw-r--r--nand_spl/board/freescale/p1010rdb/Makefile141
-rw-r--r--nand_spl/board/freescale/p1010rdb/nand_boot.c130
-rw-r--r--nand_spl/board/freescale/p1_p2_rdb_pc/Makefile137
-rw-r--r--nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c134
-rw-r--r--nand_spl/nand_boot_fsl_ifc.c271
147 files changed, 12055 insertions, 737 deletions
diff --git a/Makefile b/Makefile
index 77140eb7a..ddcf5332b 100644
--- a/Makefile
+++ b/Makefile
@@ -253,10 +253,12 @@ LIBS += drivers/power/libpower.o
LIBS += drivers/spi/libspi.o
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/libqe.o
+LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/libqe.o
+LIBS += drivers/net/fm/libfm.o
LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
diff --git a/README b/README
index a43da97a4..91b6695cf 100644
--- a/README
+++ b/README
@@ -2862,6 +2862,43 @@ Low Level (hardware related) configuration options:
and RPXsuper) to be able to adjust the position of
the IMMR register after a reset.
+- CONFIG_SYS_CCSRBAR_DEFAULT:
+ Default (power-on reset) physical address of CCSR on Freescale
+ PowerPC SOCs.
+
+- CONFIG_SYS_CCSRBAR:
+ Virtual address of CCSR. On a 32-bit build, this is typically
+ the same value as CONFIG_SYS_CCSRBAR_DEFAULT.
+
+ CONFIG_SYS_DEFAULT_IMMR must also be set to this value,
+ for cross-platform code that uses that macro instead.
+
+- CONFIG_SYS_CCSRBAR_PHYS:
+ Physical address of CCSR. CCSR can be relocated to a new
+ physical address, if desired. In this case, this macro should
+ be set to that address. Otherwise, it should be set to the
+ same value as CONFIG_SYS_CCSRBAR_DEFAULT. For example, CCSR
+ is typically relocated on 36-bit builds. It is recommended
+ that this macro be defined via the _HIGH and _LOW macros:
+
+ #define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH
+ * 1ull) << 32 | CONFIG_SYS_CCSRBAR_PHYS_LOW)
+
+- CONFIG_SYS_CCSRBAR_PHYS_HIGH:
+ Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS. This value is typically
+ either 0 (32-bit build) or 0xF (36-bit build). This macro is
+ used in assembly code, so it must not contain typecasts or
+ integer size suffixes (e.g. "ULL").
+
+- CONFIG_SYS_CCSRBAR_PHYS_LOW:
+ Lower 32-bits of CONFIG_SYS_CCSRBAR_PHYS. This macro is
+ used in assembly code, so it must not contain typecasts or
+ integer size suffixes (e.g. "ULL").
+
+- CONFIG_SYS_CCSR_DO_NOT_RELOCATE:
+ If this macro is defined, then CONFIG_SYS_CCSRBAR_PHYS will be
+ forced to a value that ensures that CCSR is not relocated.
+
- Floppy Disk Support:
CONFIG_SYS_FDC_DRIVE_NUMBER
diff --git a/arch/powerpc/cpu/mpc83xx/Makefile b/arch/powerpc/cpu/mpc83xx/Makefile
index 3979b6fba..b35303618 100644
--- a/arch/powerpc/cpu/mpc83xx/Makefile
+++ b/arch/powerpc/cpu/mpc83xx/Makefile
@@ -34,7 +34,6 @@ COBJS-y += cpu.o
COBJS-y += cpu_init.o
COBJS-y += speed.o
COBJS-y += interrupts.o
-COBJS-y += spd_sdram.o
COBJS-y += ecc.o
COBJS-$(CONFIG_QE) += qe_io.o
COBJS-$(CONFIG_FSL_SERDES) += serdes.o
@@ -42,6 +41,13 @@ COBJS-$(CONFIG_PCI) += pci.o
COBJS-$(CONFIG_PCIE) += pcie.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+ifdef CONFIG_FSL_DDR2
+COBJS-$(CONFIG_MPC8349) += ddr-gen2.o
+else
+COBJS-y += spd_sdram.o
+endif
+COBJS-$(CONFIG_FSL_DDR2) += law.o
+
COBJS := $(COBJS-y)
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -52,6 +58,18 @@ all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
+$(obj)ddr-gen1.c:
+ @rm -f $(obj)ddr-gen1.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen1.c $(obj)ddr-gen1.c
+
+$(obj)ddr-gen2.c:
+ @rm -f $(obj)ddr-gen2.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen2.c $(obj)ddr-gen2.c
+
+$(obj)ddr-gen3.c:
+ @rm -f $(obj)ddr-gen3.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen3.c $(obj)ddr-gen3.c
+
#########################################################################
# defines $(obj).depend target
diff --git a/arch/powerpc/cpu/mpc83xx/ecc.c b/arch/powerpc/cpu/mpc83xx/ecc.c
index f8eab96b1..717365c8d 100644
--- a/arch/powerpc/cpu/mpc83xx/ecc.c
+++ b/arch/powerpc/cpu/mpc83xx/ecc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on the contribution of Marian Balakowicz <m8@semihalf.com>
@@ -20,8 +20,12 @@
#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
void ecc_print_status(void)
{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
+ immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+#ifdef CONFIG_FSL_DDR2
+ ccsr_ddr_t *ddr = &immap->ddr;
+#else
+ ddr83xx_t *ddr = &immap->ddr;
+#endif
printf("\nECC mode: %s\n\n",
(ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
@@ -100,8 +104,12 @@ void ecc_print_status(void)
int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
+ immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+#ifdef CONFIG_FSL_DDR2
+ ccsr_ddr_t *ddr = &immap->ddr;
+#else
+ ddr83xx_t *ddr = &immap->ddr;
+#endif
volatile u32 val;
u64 *addr;
u32 count;
diff --git a/arch/powerpc/cpu/mpc83xx/law.c b/arch/powerpc/cpu/mpc83xx/law.c
new file mode 100644
index 000000000..66c88b697
--- /dev/null
+++ b/arch/powerpc/cpu/mpc83xx/law.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
+{
+ immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+ law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
+ u64 start_align, law_sz;
+ int law_sz_enc;
+
+ if (start == 0)
+ start_align = 1ull << (LAW_SIZE_2G + 1);
+ else
+ start_align = 1ull << (ffs64(start) - 1);
+ law_sz = min(start_align, sz);
+ law_sz_enc = __ilog2_u64(law_sz) - 1;
+
+ /*
+ * Set up LAWBAR for all of DDR.
+ */
+ ecm->bar = start & 0xfffff000;
+ ecm->ar = (LAWAR_EN | (id << 20) | (LAWAR_SIZE & law_sz_enc));
+ debug("DDR:bar=0x%08x\n", ecm->bar);
+ debug("DDR:ar=0x%08x\n", ecm->ar);
+
+ /* recalculate size based on what was actually covered by the law */
+ law_sz = 1ull << __ilog2_u64(law_sz);
+
+ /* do we still have anything to map */
+ sz = sz - law_sz;
+ if (sz) {
+ start += law_sz;
+
+ start_align = 1ull << (ffs64(start) - 1);
+ law_sz = min(start_align, sz);
+ law_sz_enc = __ilog2_u64(law_sz) - 1;
+ ecm = &immap->sysconf.ddrlaw[1];
+ ecm->bar = start & 0xfffff000;
+ ecm->ar = (LAWAR_EN | (id << 20) | (LAWAR_SIZE & law_sz_enc));
+ debug("DDR:bar=0x%08x\n", ecm->bar);
+ debug("DDR:ar=0x%08x\n", ecm->ar);
+ } else {
+ return 0;
+ }
+
+ /* do we still have anything to map */
+ sz = sz - law_sz;
+ if (sz)
+ return 1;
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index 4542ab1ac..f78099d2f 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -507,6 +507,15 @@ ulong get_bus_freq(ulong dummy)
return gd->csb_clk;
}
+/********************************************
+ * get_ddr_freq
+ * return ddr bus freq in Hz
+ *********************************************/
+ulong get_ddr_freq(ulong dummy)
+{
+ return gd->mem_clk;
+}
+
int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
char buf[32];
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 7026bca60..058d609f1 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -67,6 +67,7 @@ COBJS-$(CONFIG_P2020) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P2040) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P2041) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_P3060) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o
@@ -81,6 +82,7 @@ COBJS-$(CONFIG_SYS_DPAA_QBMAN) += portals.o
COBJS-$(CONFIG_PPC_P2040) += p2041_ids.o
COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o
COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
+COBJS-$(CONFIG_PPC_P3060) += p3060_ids.o
COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
@@ -114,6 +116,7 @@ COBJS-$(CONFIG_P2020) += p2020_serdes.o
COBJS-$(CONFIG_PPC_P2040) += p2041_serdes.o
COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o
COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
+COBJS-$(CONFIG_PPC_P3060) += p3060_serdes.o
COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 7b9f77362..a09eb9140 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -87,6 +87,22 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
puts("Work-around for Erratum DDR111 enabled\n");
puts("Work-around for Erratum DDR134 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A002769
+ puts("Work-around for Erratum IFC-A002769 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
+ puts("Work-around for Erratum P1010-A003549 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
+ puts("Work-around for Erratum IFC A-003399 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+ if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
+ puts("Work-around for Erratum NMG DDR120 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
+ puts("Work-around for Erratum NMG_LBC103 enabled\n");
+#endif
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 22fa4615c..49c055169 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -64,13 +64,11 @@ int checkcpu (void)
u32 ddr_ratio = 0;
#endif /* CONFIG_FSL_CORENET */
#endif /* CONFIG_DDR_CLK_FREQ */
- int i;
+ unsigned int i, core, nr_cores = cpu_numcores();
+ u32 mask = cpu_mask();
svr = get_svr();
major = SVR_MAJ(svr);
-#ifdef CONFIG_MPC8536
- major &= 0x7; /* the msb of this nibble is a mfg code */
-#endif
minor = SVR_MIN(svr);
if (cpu_numcores() > 1) {
@@ -119,11 +117,11 @@ int checkcpu (void)
get_sys_info(&sysinfo);
puts("Clock Configuration:");
- for (i = 0; i < cpu_numcores(); i++) {
+ for_each_cpu(i, core, nr_cores, mask) {
if (!(i & 3))
printf ("\n ");
- printf("CPU%d:%-4s MHz, ",
- i,strmhz(buf1, sysinfo.freqProcessor[i]));
+ printf("CPU%d:%-4s MHz, ", core,
+ strmhz(buf1, sysinfo.freqProcessor[core]));
}
printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 6aca166a9..0a4ce538f 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -31,6 +31,7 @@
#include <asm/processor.h>
#include <ioports.h>
#include <sata.h>
+#include <fm_eth.h>
#include <asm/io.h>
#include <asm/cache.h>
#include <asm/mmu.h>
@@ -225,7 +226,9 @@ void cpu_init_f (void)
#ifdef CONFIG_SYS_DCSRBAR_PHYS
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
-
+#if defined(CONFIG_SECURE_BOOT)
+ struct law_entry law;
+#endif
#ifdef CONFIG_MPC8548
ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
uint svr = get_svr();
@@ -243,6 +246,13 @@ void cpu_init_f (void)
disable_tlb(14);
disable_tlb(15);
+#if defined(CONFIG_SECURE_BOOT)
+ /* Disable the LAW created for NOR flash by the PBI commands */
+ law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
+ if (law.index != -1)
+ disable_law(law.index);
+#endif
+
#ifdef CONFIG_CPM2
config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
#endif
@@ -453,6 +463,9 @@ skip_l2:
clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
__raw_readl(&lbc->lcrr);
isync();
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
+ udelay(100);
+#endif
#endif
#ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
@@ -472,6 +485,10 @@ skip_l2:
}
#endif
+#ifdef CONFIG_FMAN_ENET
+ fman_enet_init();
+#endif
+
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index 32aa94b61..4ef3c9a8a 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2009 Freescale Semiconductor, Inc
+ * Copyright 2009-2011 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -21,59 +21,59 @@
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
-#ifdef CONFIG_FSL_CORENET
-static void setup_ccsrbar(void)
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+void setup_ifc(void)
{
- u32 temp;
- volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
- volatile ccsr_local_t *ccm;
+ struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+ u32 _mas0, _mas1, _mas2, _mas3, _mas7;
+ phys_addr_t flash_phys = CONFIG_SYS_FLASH_BASE_PHYS;
/*
- * We can't call set_law() because we haven't moved
- * CCSR yet.
+ * Adjust the TLB we were running out of to match the phys addr of the
+ * chip select we are adjusting and will return to.
*/
- ccm = (void *)ccsr_virt;
-
- out_be32(&ccm->law[0].lawbarh,
- (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32);
- out_be32(&ccm->law[0].lawbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS);
- out_be32(&ccm->law[0].lawar,
- LAW_EN | (0x1e << 20) | LAW_SIZE_4K);
-
- in_be32((u32 *)(ccsr_virt + 0));
- in_be32((u32 *)(ccsr_virt + 1));
- isync();
-
- ccm = (void *)CONFIG_SYS_CCSRBAR;
- /* Now use the temporary LAW to move CCSR */
- out_be32(&ccm->ccsrbarh, (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32);
- out_be32(&ccm->ccsrbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS);
- out_be32(&ccm->ccsrar, CCSRAR_C);
- temp = in_be32(&ccm->ccsrar);
- disable_law(0);
-}
-#else
-static void setup_ccsrbar(void)
-{
- u32 temp;
- volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
+ flash_phys += (~CONFIG_SYS_AMASK0) + 1 - 4*1024*1024;
+
+ _mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(15);
+ _mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_IPROT |
+ MAS1_TSIZE(BOOKE_PAGESZ_4M);
+ _mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, MAS2_I|MAS2_G);
+ _mas3 = FSL_BOOKE_MAS3(flash_phys, 0, MAS3_SW|MAS3_SR|MAS3_SX);
+ _mas7 = FSL_BOOKE_MAS7(flash_phys);
+
+ mtspr(MAS0, _mas0);
+ mtspr(MAS1, _mas1);
+ mtspr(MAS2, _mas2);
+ mtspr(MAS3, _mas3);
+ mtspr(MAS7, _mas7);
- temp = in_be32(ccsr_virt);
- out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12);
- temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR);
+ asm volatile("isync;msync;tlbwe;isync");
+
+ out_be32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0);
+ out_be32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0);
+ out_be32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0);
+
+ return ;
}
#endif
-#endif
/* We run cpu_init_early_f in AS = 1 */
void cpu_init_early_f(void)
{
u32 mas0, mas1, mas2, mas3, mas7;
int i;
+#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+ ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
+ u32 *l2srbar, *dst, *src;
+ void (*setup_ifc_sram)(void);
+#endif
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
@@ -85,28 +85,77 @@ void cpu_init_early_f(void)
for (i = 0; i < sizeof(gd_t); i++)
((char *)gd)[i] = 0;
- mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(0);
- mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_4K);
+ mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(13);
+ mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_1M);
mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G);
mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS, 0, MAS3_SW|MAS3_SR);
mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_PHYS);
write_tlb(mas0, mas1, mas2, mas3, mas7);
- /* set up CCSR if we want it moved */
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
- mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(1);
- /* mas1 is the same as above */
- mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G);
- mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, MAS3_SW|MAS3_SR);
- mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_DEFAULT);
+/*
+ * Work Around for IFC Erratum A-003549. This issue is P1010
+ * specific. LCLK(a free running clk signal) is muxed with IFC_CS3 on P1010 SOC
+ * Hence specifically selecting CS3.
+ */
+#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_LCLK_IFC_CS3);
+#endif
+
+ init_laws();
+
+/*
+ * Work Around for IFC Erratum A003399, issue will hit only when execution
+ * from NOR Flash
+ */
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+#define SRAM_BASE_ADDR (0x00000000)
+ /* TLB for SRAM */
+ mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(9);
+ mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS |
+ MAS1_TSIZE(BOOKE_PAGESZ_1M);
+ mas2 = FSL_BOOKE_MAS2(SRAM_BASE_ADDR, MAS2_I);
+ mas3 = FSL_BOOKE_MAS3(SRAM_BASE_ADDR, 0, MAS3_SX|MAS3_SW|MAS3_SR);
+ mas7 = FSL_BOOKE_MAS7(0);
write_tlb(mas0, mas1, mas2, mas3, mas7);
- setup_ccsrbar();
+ out_be32(&l2cache->l2srbar0, SRAM_BASE_ADDR);
+
+ out_be32(&l2cache->l2errdis,
+ (MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC));
+
+ out_be32(&l2cache->l2ctl,
+ (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE));
+
+ /*
+ * Copy the code in setup_ifc to L2SRAM. Do a word copy
+ * because NOR Flash on P1010 does not support byte
+ * access (Erratum IFC-A002769)
+ */
+ setup_ifc_sram = (void *)SRAM_BASE_ADDR;
+ dst = (u32 *) SRAM_BASE_ADDR;
+ src = (u32 *) setup_ifc;
+ for (i = 0; i < 1024; i++)
+ *l2srbar++ = *src++;
+
+ setup_ifc_sram();
+
+ /* CLEANUP */
+ clrbits_be32(&l2cache->l2ctl,
+ (MPC85xx_L2CTL_L2E |
+ MPC85xx_L2CTL_L2SRAM_ENTIRE));
+ out_be32(&l2cache->l2srbar0, 0x0);
+#endif
+
+ invalidate_tlb(1);
+
+#if defined(CONFIG_SECURE_BOOT)
+ /* Disable the TLBs created by ISBC */
+ for (i = CONFIG_SYS_ISBC_START_TLB;
+ i < CONFIG_SYS_ISBC_START_TLB + CONFIG_SYS_ISBC_NUM_TLBS; i++)
+ disable_tlb(i);
#endif
- init_laws();
- invalidate_tlb(0);
init_tlbs();
}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
index 796d39842..f33db021f 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
@@ -21,10 +21,12 @@
*/
#include <common.h>
+#include <asm/fsl_ifc.h>
#include <asm/io.h>
void cpu_init_f(void)
{
+#ifdef CONFIG_FSL_LBC
fsl_lbc_t *lbc = LBC_BASE_ADDR;
/*
@@ -39,6 +41,16 @@ void cpu_init_f(void)
#else
#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM must be defined
#endif
+#endif
+#ifdef CONFIG_FSL_IFC
+#ifndef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
+#if defined(CONFIG_SYS_CSPR0) && defined(CONFIG_SYS_CSOR0)
+ set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0);
+ set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
+ set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0);
+#endif
+#endif
+#endif
#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
index 655f99c02..49000a19e 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -8,6 +8,7 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/processor.h>
#include <asm/fsl_ddr_sdram.h>
#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
@@ -18,13 +19,36 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num)
{
unsigned int i;
- volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+#ifdef CONFIG_MPC83xx
+ ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC83xx_DDR_ADDR;
+#else
+ ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ uint svr;
+#endif
+#endif
if (ctrl_num) {
printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
return;
}
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+ /*
+ * Set the DDR IO receiver to an acceptable bias point.
+ * Fixed in Rev 2.1.
+ */
+ svr = get_svr();
+ if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) {
+ if ((regs->ddr_sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) ==
+ SDRAM_CFG_SDRAM_TYPE_DDR2)
+ out_be32(&gur->ddrioovcr, 0x90000000);
+ else
+ out_be32(&gur->ddrioovcr, 0xA8000000);
+ }
+#endif
+
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
if (i == 0) {
out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 8f13cd8eb..d20c94c0f 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -361,6 +361,7 @@ void fdt_add_enet_stashing(void *fdt)
}
#if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
+#ifdef CONFIG_SYS_DPAA_FMAN
static void ft_fixup_clks(void *blob, const char *compat, u32 offset,
unsigned long freq)
{
@@ -374,12 +375,14 @@ static void ft_fixup_clks(void *blob, const char *compat, u32 offset,
"for %s: %s\n", compat, fdt_strerror(off));
}
}
+#endif
static void ft_fixup_dpaa_clks(void *blob)
{
sys_info_t sysinfo;
get_sys_info(&sysinfo);
+#ifdef CONFIG_SYS_DPAA_FMAN
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
sysinfo.freqFMan[0]);
@@ -387,6 +390,7 @@ static void ft_fixup_dpaa_clks(void *blob)
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
sysinfo.freqFMan[1]);
#endif
+#endif
#ifdef CONFIG_SYS_DPAA_PME
do_fixup_by_compat_u32(blob, "fsl,pme",
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 4307a4ccb..07e58ed02 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -482,6 +482,13 @@ static void wait_for_rstdone(unsigned int bank)
printf("SERDES: timeout resetting bank %u\n", bank + 1);
}
+
+void __soc_serdes_init(void)
+{
+ /* Allow for SoC-specific initialization in <SOC>_serdes.c */
+};
+void soc_serdes_init(void) __attribute__((weak, alias("__soc_serdes_init")));
+
void fsl_serdes_init(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -570,6 +577,8 @@ void fsl_serdes_init(void)
}
}
+ soc_serdes_init();
+
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
/*
* Bank two uses the clock from bank three, so if bank two is enabled,
diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c
index bd1909471..e0ea502a0 100644
--- a/arch/powerpc/cpu/mpc85xx/liodn.c
+++ b/arch/powerpc/cpu/mpc85xx/liodn.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -120,6 +120,19 @@ static void setup_pme_liodn_base(void)
#endif
}
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+static void setup_raide_liodn_base(void)
+{
+ struct ccsr_raide *raide = (void *)CONFIG_SYS_FSL_RAID_ENGINE_ADDR;
+
+ /* setup raid engine liodn base for data/desc ; both set to 47 */
+ u32 base = (liodn_bases[FSL_HW_PORTAL_RAID_ENGINE].id[0] << 16) |
+ liodn_bases[FSL_HW_PORTAL_RAID_ENGINE].id[0];
+
+ out_be32(&raide->liodnbr, base);
+}
+#endif
+
void set_liodns(void)
{
/* setup general liodn offsets */
@@ -145,6 +158,12 @@ void set_liodns(void)
#endif
/* setup PME liodn base */
setup_pme_liodn_base();
+
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+ /* raid engine ccr addr code for liodn */
+ set_liodn(raide_liodn_tbl, raide_liodn_tbl_sz);
+ setup_raide_liodn_base();
+#endif
}
static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz)
@@ -184,4 +203,8 @@ void fdt_fixup_liodn(void *blob)
#endif
#endif
fdt_fixup_liodn_tbl(blob, sec_liodn_tbl, sec_liodn_tbl_sz);
+
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+ fdt_fixup_liodn_tbl(blob, raide_liodn_tbl, raide_liodn_tbl_sz);
+#endif
}
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index 758e6d704..ffc2a9ad6 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -221,14 +221,14 @@ ulong get_spin_virt_addr(void)
#ifdef CONFIG_FSL_CORENET
static void plat_mp_up(unsigned long bootpg)
{
- u32 up, cpu_up_mask, whoami;
+ u32 cpu_up_mask, whoami;
u32 *table = (u32 *)get_spin_virt_addr();
volatile ccsr_gur_t *gur;
volatile ccsr_local_t *ccm;
volatile ccsr_rcpm_t *rcpm;
volatile ccsr_pic_t *pic;
int timeout = 10;
- u32 nr_cpus;
+ u32 mask = cpu_mask();
struct law_entry e;
gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -236,8 +236,6 @@ static void plat_mp_up(unsigned long bootpg)
rcpm = (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
- nr_cpus = ((in_be32(&pic->frr) >> 8) & 0xff) + 1;
-
whoami = in_be32(&pic->whoami);
cpu_up_mask = 1 << whoami;
out_be32(&ccm->bstrl, bootpg);
@@ -251,19 +249,18 @@ static void plat_mp_up(unsigned long bootpg)
/* disable time base at the platform */
out_be32(&rcpm->ctbenrl, cpu_up_mask);
- /* release the hounds */
- up = ((1 << nr_cpus) - 1);
- out_be32(&gur->brrl, up);
+ out_be32(&gur->brrl, mask);
/* wait for everyone */
while (timeout) {
- int i;
- for (i = 0; i < nr_cpus; i++) {
- if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
- cpu_up_mask |= (1 << i);
- };
+ unsigned int i, cpu, nr_cpus = cpu_numcores();
- if ((cpu_up_mask & up) == up)
+ for_each_cpu(i, cpu, nr_cpus, mask) {
+ if (table[cpu * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
+ cpu_up_mask |= (1 << cpu);
+ }
+
+ if ((cpu_up_mask & mask) == mask)
break;
udelay(100);
@@ -272,7 +269,7 @@ static void plat_mp_up(unsigned long bootpg)
if (timeout == 0)
printf("CPU up timeout. CPU up mask is %x should be %x\n",
- cpu_up_mask, up);
+ cpu_up_mask, mask);
/* enable time base at the platform */
out_be32(&rcpm->ctbenrl, 0);
@@ -283,7 +280,7 @@ static void plat_mp_up(unsigned long bootpg)
mtspr(SPRN_TBWU, 0);
mtspr(SPRN_TBWL, 0);
- out_be32(&rcpm->ctbenrl, (1 << nr_cpus) - 1);
+ out_be32(&rcpm->ctbenrl, mask);
#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
/*
diff --git a/arch/powerpc/cpu/mpc85xx/p3060_ids.c b/arch/powerpc/cpu/mpc85xx/p3060_ids.c
new file mode 100644
index 000000000..07703d44e
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p3060_ids.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO( 1, 2, 1, 0),
+ SET_QP_INFO( 3, 4, 2, 1),
+ SET_QP_INFO( 5, 6, 3, 2),
+ SET_QP_INFO( 7, 8, 4, 3),
+ SET_QP_INFO( 9, 10, 5, 4),
+ SET_QP_INFO(11, 12, 6, 5),
+ SET_QP_INFO(13, 14, 7, 6),
+ SET_QP_INFO(15, 16, 8, 7),
+ SET_QP_INFO(17, 18, 9, 0), /* for now sdest to 0 */
+ SET_QP_INFO(19, 20, 10, 0), /* for now sdest to 0 */
+};
+#endif
+
+struct liodn_id_table liodn_tbl[] = {
+ SET_USB_LIODN(1, "fsl-usb2-mph", 127),
+ SET_USB_LIODN(2, "fsl-usb2-dr", 157),
+
+ SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193),
+ SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194),
+
+ SET_DMA_LIODN(1, 196),
+ SET_DMA_LIODN(2, 197),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 198, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 199, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rmuliodnr, 0),
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(31),
+ SET_BMAN_LIODN(32),
+#endif
+ SET_PME_LIODN(128),
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 11),
+ SET_FMAN_RX_1G_LIODN(1, 1, 12),
+ SET_FMAN_RX_1G_LIODN(1, 2, 13),
+ SET_FMAN_RX_1G_LIODN(1, 3, 14),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+struct liodn_id_table fman2_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(2, 0, 16),
+ SET_FMAN_RX_1G_LIODN(2, 1, 17),
+ SET_FMAN_RX_1G_LIODN(2, 2, 18),
+ SET_FMAN_RX_1G_LIODN(2, 3, 19),
+};
+int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+#endif
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 146, 154),
+ SET_SEC_JR_LIODN_ENTRY(1, 147, 155),
+ SET_SEC_JR_LIODN_ENTRY(2, 178, 186),
+ SET_SEC_JR_LIODN_ENTRY(3, 179, 187),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 144),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 145),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 176),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 177),
+ SET_SEC_DECO_LIODN_ENTRY(0, 129, 161),
+ SET_SEC_DECO_LIODN_ENTRY(1, 130, 162),
+ SET_SEC_DECO_LIODN_ENTRY(2, 131, 163),
+ SET_SEC_DECO_LIODN_ENTRY(3, 132, 164),
+ SET_SEC_DECO_LIODN_ENTRY(4, 133, 165),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+struct liodn_id_table liodn_bases[] = {
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(96, 106),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32),
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(64),
+#endif
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+ [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(116, 133),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/p3060_serdes.c b/arch/powerpc/cpu/mpc85xx/p3060_serdes.c
new file mode 100644
index 000000000..6387276ba
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p3060_serdes.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet_serdes.h"
+
+static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
+ [0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC1,
+ SGMII_FM1_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2,
+ NONE, NONE, AURORA, AURORA},
+ [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, SGMII_FM2_DTSEC3,
+ SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4,
+ SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM1_DTSEC2, NONE, NONE, AURORA, AURORA},
+ [0x16] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1,
+ AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1,
+ SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2, SGMII_FM2_DTSEC3,
+ SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
+ [0x19] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1,
+ AURORA, AURORA, PCIE2, PCIE2, PCIE2, PCIE2, SGMII_FM2_DTSEC3,
+ SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
+ [0x1c] = {NONE, NONE, SRIO1, SRIO2, NONE, NONE, NONE, NONE,
+ AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1,
+ SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2, SGMII_FM2_DTSEC3,
+ SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
+};
+
+enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
+{
+ if (!serdes_lane_enabled(lane))
+ return NONE;
+
+ return serdes_cfg_tbl[cfg][lane];
+}
+
+int is_serdes_prtcl_valid(u32 prtcl)
+{
+ int i;
+
+ if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_cfg_tbl[prtcl][i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
+
+void soc_serdes_init(void)
+{
+ /*
+ * On the P3060 the devdisr2 register does not correctly reflect
+ * the state of the MACs based on the RCW fields. So disable the MACs
+ * based on the srds_prtcl and ec1, ec2, ec3 fields
+ */
+
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+ u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
+ u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+ u32 ec1_ext, ec2_ext;
+
+ /* NOTE: Leave FM1-1,FM1-2 alone for MDIO access */
+
+ if (!is_serdes_configured(SGMII_FM1_DTSEC3))
+ devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC1_3;
+
+ if (!is_serdes_configured(SGMII_FM1_DTSEC4))
+ devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC1_4;
+
+ if (!is_serdes_configured(SGMII_FM2_DTSEC1))
+ devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_1;
+
+ if (!is_serdes_configured(SGMII_FM2_DTSEC2))
+ devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_2;
+
+ if (!is_serdes_configured(SGMII_FM2_DTSEC3))
+ devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_3;
+
+ if (!is_serdes_configured(SGMII_FM2_DTSEC4))
+ devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_4;
+
+ if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
+ FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) {
+ devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC1_2;
+ }
+
+ if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
+ FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1) {
+ devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC2_1;
+ }
+
+ ec1_ext = rcwsr13 & FSL_CORENET_RCWSR13_EC1_EXT;
+ if (ec1_ext) {
+ if ((ec1_ext == FSL_CORENET_RCWSR13_EC1_EXT_FM1_DTSEC4_RGMII) ||
+ (ec1_ext == FSL_CORENET_RCWSR13_EC1_EXT_FM1_DTSEC4_MII))
+ devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC1_4;
+ }
+
+ ec2_ext = rcwsr13 & FSL_CORENET_RCWSR13_EC2_EXT;
+ if (ec2_ext) {
+ if ((ec2_ext == FSL_CORENET_RCWSR13_EC2_EXT_FM2_DTSEC4_RGMII) ||
+ (ec2_ext == FSL_CORENET_RCWSR13_EC2_EXT_FM2_DTSEC4_MII))
+ devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC2_4;
+ }
+
+ if ((rcwsr13 & FSL_CORENET_RCWSR13_EC3) ==
+ FSL_CORENET_RCWSR13_EC3_FM2_DTSEC4_MII)
+ devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC2_4;
+
+ out_be32(&gur->devdisr2, devdisr2);
+}
diff --git a/arch/powerpc/cpu/mpc85xx/p5020_ids.c b/arch/powerpc/cpu/mpc85xx/p5020_ids.c
index 98365888a..2911c1388 100644
--- a/arch/powerpc/cpu/mpc85xx/p5020_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p5020_ids.c
@@ -97,6 +97,16 @@ struct liodn_id_table sec_liodn_tbl[] = {
};
int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+struct liodn_id_table raide_liodn_tbl[] = {
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63),
+};
+int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl);
+#endif
+
struct liodn_id_table liodn_bases[] = {
[FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 100),
#ifdef CONFIG_SYS_DPAA_FMAN
@@ -105,4 +115,7 @@ struct liodn_id_table liodn_bases[] = {
#ifdef CONFIG_SYS_DPAA_PME
[FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(136, 172),
#endif
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+ [FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(47),
+#endif
};
diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c
index ecaa30de8..418dd9d9e 100644
--- a/arch/powerpc/cpu/mpc85xx/portals.c
+++ b/arch/powerpc/cpu/mpc85xx/portals.c
@@ -151,7 +151,7 @@ static int fdt_qportal(void *blob, int off, int id, char *name,
dev_handle = fdt_get_phandle(blob, dev_off);
if (dev_handle <= 0) {
dev_handle = fdt_alloc_phandle(blob);
- ret = fdt_create_phandle(blob, dev_off,
+ ret = fdt_set_phandle(blob, dev_off,
dev_handle);
if (ret < 0)
return ret;
@@ -198,7 +198,10 @@ void fdt_fixup_qportals(void *blob)
u32 liodns[2];
#endif
const int *ci = fdt_getprop(blob, off, "cell-index", NULL);
- int j, i = *ci;
+ int i = *ci;
+#ifdef CONFIG_SYS_DPAA_FMAN
+ int j;
+#endif
err = fdt_setprop(blob, off, "compatible", compat, compat_len);
if (err < 0)
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index a83dfeb84..ce4753245 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -41,6 +41,7 @@ void get_sys_info (sys_info_t * sysInfo)
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#ifdef CONFIG_FSL_CORENET
volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
+ unsigned int cpu;
const u8 core_cplx_PLL[16] = {
[ 0] = 0, /* CC1 PPL / 1 */
@@ -97,11 +98,11 @@ void get_sys_info (sys_info_t * sysInfo)
freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i];
}
rcw_tmp = in_be32(&gur->rcwsr[3]);
- for (i = 0; i < cpu_numcores(); i++) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + i*8) >> 27) & 0xf;
+ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
- sysInfo->freqProcessor[i] =
+ sysInfo->freqProcessor[cpu] =
freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
}
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 878a3d67e..5e0d78d00 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -83,6 +83,45 @@
_start_e500:
+#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500MC)
+ /* ISBC uses L2 as stack.
+ * Disable L2 cache here so that u-boot can enable it later
+ * as part of it's normal flow
+ */
+
+ /* Check if L2 is enabled */
+ mfspr r3, SPRN_L2CSR0
+ lis r2, L2CSR0_L2E@h
+ ori r2, r2, L2CSR0_L2E@l
+ and. r4, r3, r2
+ beq l2_disabled
+
+ mfspr r3, SPRN_L2CSR0
+ /* Flush L2 cache */
+ lis r2,(L2CSR0_L2FL)@h
+ ori r2, r2, (L2CSR0_L2FL)@l
+ or r3, r2, r3
+ sync
+ isync
+ mtspr SPRN_L2CSR0,r3
+ isync
+1:
+ mfspr r3, SPRN_L2CSR0
+ and. r1, r3, r2
+ bne 1b
+
+ mfspr r3, SPRN_L2CSR0
+ lis r2, L2CSR0_L2E@h
+ ori r2, r2, L2CSR0_L2E@l
+ andc r4, r3, r2
+ sync
+ isync
+ mtspr SPRN_L2CSR0,r4
+ isync
+
+l2_disabled:
+#endif
+
/* clear registers/arrays not reset by hardware */
/* L1 */
@@ -279,10 +318,244 @@ _start_e500:
#endif /* CONFIG_MPC8569 */
+/*
+ * Relocate CCSR, if necessary. We relocate CCSR if (obviously) the default
+ * location is not where we want it. This typically happens on a 36-bit
+ * system, where we want to move CCSR to near the top of 36-bit address space.
+ *
+ * To move CCSR, we create two temporary TLBs, one for the old location, and
+ * another for the new location. On CoreNet systems, we also need to create
+ * a special, temporary LAW.
+ *
+ * As a general rule, TLB0 is used for short-term TLBs, and TLB1 is used for
+ * long-term TLBs, so we use TLB0 here.
+ */
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
+
+#if !defined(CONFIG_SYS_CCSRBAR_PHYS_HIGH) || !defined(CONFIG_SYS_CCSRBAR_PHYS_LOW)
+#error "CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW) must be defined."
+#endif
+
+purge_old_ccsr_tlb:
+ lis r8, CONFIG_SYS_CCSRBAR@h
+ ori r8, r8, CONFIG_SYS_CCSRBAR@l
+ lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h
+ ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l
+
+ /*
+ * In a multi-stage boot (e.g. NAND boot), a previous stage may have
+ * created a TLB for CCSR, which will interfere with our relocation
+ * code. Since we're going to create a new TLB for CCSR anyway,
+ * it should be safe to delete this old TLB here. We have to search
+ * for it, though.
+ */
+
+ li r1, 0
+ mtspr MAS6, r1 /* Search the current address space and PID */
+ tlbsx 0, r8
+ mfspr r1, MAS1
+ andis. r2, r1, MAS1_VALID@h /* Check for the Valid bit */
+ beq 1f /* Skip if no TLB found */
+
+ rlwinm r1, r1, 0, 1, 31 /* Clear Valid bit */
+ mtspr MAS1, r1
+ tlbwe
+1:
+
+create_ccsr_new_tlb:
+ /*
+ * Create a TLB for the new location of CCSR. Register R8 is reserved
+ * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR).
+ */
+ lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
+ ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
+ lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
+ ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
+ lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
+ ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
+ lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h
+ ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l
+ lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
+ ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+ mtspr MAS0, r0
+ mtspr MAS1, r1
+ mtspr MAS2, r2
+ mtspr MAS3, r3
+ mtspr MAS7, r7
+ isync
+ msync
+ tlbwe
+
+ /*
+ * Create a TLB for the old location of CCSR. Register R9 is reserved
+ * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000).
+ */
+create_ccsr_old_tlb:
+ lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
+ ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
+ lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
+ ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
+ lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h
+ ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l
+ li r7, 0 /* The default CCSR address is always a 32-bit number */
+ mtspr MAS0, r0
+ /* MAS1 is the same as above */
+ mtspr MAS2, r2
+ mtspr MAS3, r3
+ mtspr MAS7, r7
+ isync
+ msync
+ tlbwe
+
+#ifdef CONFIG_FSL_CORENET
+
+#define CCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000)
+#define LAW_EN 0x80000000
+#define LAW_SIZE_4K 0xb
+#define CCSRBAR_LAWAR (LAW_EN | (0x1e << 20) | LAW_SIZE_4K)
+#define CCSRAR_C 0x80000000 /* Commit */
+
+create_temp_law:
+ /*
+ * On CoreNet systems, we create the temporary LAW using a special LAW
+ * target ID of 0x1e. LAWBARH is at offset 0xc00 in CCSR.
+ */
+ lis r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
+ ori r0, r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+ lis r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@h
+ ori r1, r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@l
+ lis r2, CCSRBAR_LAWAR@h
+ ori r2, r2, CCSRBAR_LAWAR@l
+
+ stw r0, 0xc00(r9) /* LAWBARH0 */
+ stw r1, 0xc04(r9) /* LAWBARL0 */
+ sync
+ stw r2, 0xc08(r9) /* LAWAR0 */
+
+ /*
+ * Read back from LAWAR to ensure the update is complete. e500mc
+ * cores also require an isync.
+ */
+ lwz r0, 0xc08(r9) /* LAWAR0 */
+ isync
+
+ /*
+ * Read the current CCSRBARH and CCSRBARL using load word instructions.
+ * Follow this with an isync instruction. This forces any outstanding
+ * accesses to configuration space to completion.
+ */
+read_old_ccsrbar:
+ lwz r0, 0(r9) /* CCSRBARH */
+ lwz r0, 4(r9) /* CCSRBARH */
+ isync
+
+ /*
+ * Write the new values for CCSRBARH and CCSRBARL to their old
+ * locations. The CCSRBARH has a shadow register. When the CCSRBARH
+ * has a new value written it loads a CCSRBARH shadow register. When
+ * the CCSRBARL is written, the CCSRBARH shadow register contents
+ * along with the CCSRBARL value are loaded into the CCSRBARH and
+ * CCSRBARL registers, respectively. Follow this with a sync
+ * instruction.
+ */
+write_new_ccsrbar:
+ lis r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
+ ori r0, r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+ lis r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@h
+ ori r1, r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@l
+ lis r2, CCSRAR_C@h
+ ori r2, r2, CCSRAR_C@l
+
+ stw r0, 0(r9) /* Write to CCSRBARH */
+ sync /* Make sure we write to CCSRBARH first */
+ stw r1, 4(r9) /* Write to CCSRBARL */
+ sync
+
+ /*
+ * Write a 1 to the commit bit (C) of CCSRAR at the old location.
+ * Follow this with a sync instruction.
+ */
+ stw r2, 8(r9)
+ sync
+
+ /* Delete the temporary LAW */
+delete_temp_law:
+ li r1, 0
+ stw r1, 0xc08(r8)
+ sync
+ stw r1, 0xc00(r8)
+ stw r1, 0xc04(r8)
+ sync
+
+#else /* #ifdef CONFIG_FSL_CORENET */
+
+write_new_ccsrbar:
+ /*
+ * Read the current value of CCSRBAR using a load word instruction
+ * followed by an isync. This forces all accesses to configuration
+ * space to complete.
+ */
+ sync
+ lwz r0, 0(r9)
+ isync
+
+/* CONFIG_SYS_CCSRBAR_PHYS right shifted by 12 */
+#define CCSRBAR_PHYS_RS12 ((CONFIG_SYS_CCSRBAR_PHYS_HIGH << 20) | \
+ (CONFIG_SYS_CCSRBAR_PHYS_LOW >> 12))
+
+ /* Write the new value to CCSRBAR. */
+ lis r0, CCSRBAR_PHYS_RS12@h
+ ori r0, r0, CCSRBAR_PHYS_RS12@l
+ stw r0, 0(r9)
+ sync
+
+ /*
+ * The manual says to perform a load of an address that does not
+ * access configuration space or the on-chip SRAM using an existing TLB,
+ * but that doesn't appear to be necessary. We will do the isync,
+ * though.
+ */
+ isync
+
+ /*
+ * Read the contents of CCSRBAR from its new location, followed by
+ * another isync.
+ */
+ lwz r0, 0(r8)
+ isync
+
+#endif /* #ifdef CONFIG_FSL_CORENET */
+
+ /* Delete the temporary TLBs */
+delete_temp_tlbs:
+ lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
+ ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
+ li r1, 0
+ lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
+ ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
+ mtspr MAS0, r0
+ mtspr MAS1, r1
+ mtspr MAS2, r2
+ isync
+ msync
+ tlbwe
+
+ lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
+ ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
+ lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
+ ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
+ mtspr MAS0, r0
+ mtspr MAS2, r2
+ isync
+ msync
+ tlbwe
+#endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
+
+create_init_ram_area:
lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h
ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
-#ifndef CONFIG_SYS_RAMBOOT
+#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
/* create a temp mapping in AS=1 to the 4M boot window */
lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
@@ -293,6 +566,20 @@ _start_e500:
/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
+ /* create a temp mapping in AS = 1 for Flash mapping
+ * created by PBL for ISBC code
+ */
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
+
+ lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
+
+ lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))@l
#else
/*
* create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
index 8410bd797..852f9aa4a 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
@@ -23,6 +23,8 @@
* MA 02111-1307 USA
*/
+#include "config.h" /* CONFIG_BOARDDIR */
+
OUTPUT_ARCH(powerpc)
SECTIONS
{
@@ -52,8 +54,18 @@ SECTIONS
. = ALIGN(8);
__init_begin = .;
__init_end = .;
-
- .resetvec ADDR(.text) + 0xffc : {
+#if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
+ .bootpg ADDR(.text) + 0x1000 :
+ {
+ start.o (.bootpg)
+ }
+#define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */
+#elif defined(CONFIG_FSL_ELBC)
+#define RESET_VECTOR_OFFSET 0xffc /* LBC has 4k sram */
+#else
+#error unknown NAND controller
+#endif
+ .resetvec ADDR(.text) + RESET_VECTOR_OFFSET : {
KEEP(*(.resetvec))
} = 0xffff
@@ -64,4 +76,4 @@ SECTIONS
}
__bss_end__ = .;
}
-ASSERT(__init_end <= 0xfff00ffc, "NAND bootstrap too big");
+ASSERT(__init_end <= (0xfff00000 + RESET_VECTOR_OFFSET), "NAND bootstrap too big");
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 767bc524d..0365ca8aa 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -27,6 +27,7 @@
#include <common.h>
#include <command.h>
#include <tsec.h>
+#include <fm_eth.h>
#include <netdev.h>
#include <asm/cache.h>
#include <asm/io.h>
@@ -102,6 +103,8 @@ struct cpu_type cpu_type_list [] = {
CPU_TYPE_ENTRY(P2041, P2041_E, 4),
CPU_TYPE_ENTRY(P3041, P3041, 4),
CPU_TYPE_ENTRY(P3041, P3041_E, 4),
+ CPU_TYPE_ENTRY_MASK(P3060, P3060, 6, 0xf3),
+ CPU_TYPE_ENTRY_MASK(P3060, P3060_E, 6, 0xf3),
CPU_TYPE_ENTRY(P4040, P4040, 4),
CPU_TYPE_ENTRY(P4040, P4040_E, 4),
CPU_TYPE_ENTRY(P4080, P4080, 8),
@@ -129,13 +132,33 @@ struct cpu_type *identify_cpu(u32 ver)
return &cpu_type_unknown;
}
+#define MPC8xxx_PICFRR_NCPU_MASK 0x00001f00
+#define MPC8xxx_PICFRR_NCPU_SHIFT 8
+
+/*
+ * Return a 32-bit mask indicating which cores are present on this SOC.
+ */
+u32 cpu_mask()
+{
+ ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR;
+ struct cpu_type *cpu = gd->cpu;
+
+ /* better to query feature reporting register than just assume 1 */
+ if (cpu == &cpu_type_unknown)
+ return ((in_be32(&pic->frr) & MPC8xxx_PICFRR_NCPU_MASK) >>
+ MPC8xxx_PICFRR_NCPU_SHIFT) + 1;
+
+ return cpu->mask;
+}
+
+/*
+ * Return the number of cores on this SOC.
+ */
int cpu_numcores() {
ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR;
struct cpu_type *cpu = gd->cpu;
/* better to query feature reporting register than just assume 1 */
-#define MPC8xxx_PICFRR_NCPU_MASK 0x00001f00
-#define MPC8xxx_PICFRR_NCPU_SHIFT 8
if (cpu == &cpu_type_unknown)
return ((in_be32(&pic->frr) & MPC8xxx_PICFRR_NCPU_MASK) >>
MPC8xxx_PICFRR_NCPU_SHIFT) + 1;
@@ -143,6 +166,18 @@ int cpu_numcores() {
return cpu->num_cores;
}
+/*
+ * Check if the given core ID is valid
+ *
+ * Returns zero if it isn't, 1 if it is.
+ */
+int is_core_valid(unsigned int core)
+{
+ struct cpu_type *cpu = gd->cpu;
+
+ return !!((1 << core) & cpu->mask);
+}
+
int probecpu (void)
{
uint svr;
@@ -174,5 +209,8 @@ int cpu_eth_init(bd_t *bis)
tsec_standard_init(bis);
#endif
+#ifdef CONFIG_FMAN_ENET
+ fm_standard_init(bis);
+#endif
return 0;
}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 3824aade8..15cd375ae 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -18,7 +18,9 @@
#include "ddr.h"
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC83xx
+ #define _DDR_ADDR CONFIG_SYS_MPC83xx_DDR_ADDR
+#elif defined(CONFIG_MPC85xx)
#define _DDR_ADDR CONFIG_SYS_MPC85xx_DDR_ADDR
#elif defined(CONFIG_MPC86xx)
#define _DDR_ADDR CONFIG_SYS_MPC86xx_DDR_ADDR
@@ -94,6 +96,10 @@ static inline int fsl_ddr_get_rtt(void)
* 6 if 2.5ns > tCK >= 1.875ns
* 7 if 1.875ns > tCK >= 1.5ns
* 8 if 1.5ns > tCK >= 1.25ns
+ * 9 if 1.25ns > tCK >= 1.07ns
+ * 10 if 1.07ns > tCK >= 0.935ns
+ * 11 if 0.935ns > tCK >= 0.833ns
+ * 12 if 0.833ns > tCK >= 0.75ns
*/
static inline unsigned int compute_cas_write_latency(void)
{
@@ -108,8 +114,18 @@ static inline unsigned int compute_cas_write_latency(void)
cwl = 7;
else if (mclk_ps >= 1250)
cwl = 8;
- else
- cwl = 8;
+ else if (mclk_ps >= 1070)
+ cwl = 9;
+ else if (mclk_ps >= 935)
+ cwl = 10;
+ else if (mclk_ps >= 833)
+ cwl = 11;
+ else if (mclk_ps >= 750)
+ cwl = 12;
+ else {
+ cwl = 12;
+ printf("Warning: CWL is out of range\n");
+ }
return cwl;
}
@@ -146,7 +162,7 @@ static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr,
break;
case 2:
if ((dimm_number == 0 && dimm_params[0].n_ranks > 2) || \
- (dimm_number > 1 && dimm_params[dimm_number].n_ranks > 0))
+ (dimm_number >= 1 && dimm_params[dimm_number].n_ranks > 0))
go_config = 1;
break;
case 3:
@@ -617,7 +633,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
unsigned int sr_ie = 0; /* Self-refresh interrupt enable */
unsigned int dll_rst_dis; /* DLL reset disable */
unsigned int dqs_cfg; /* DQS configuration */
- unsigned int odt_cfg; /* ODT configuration */
+ unsigned int odt_cfg = 0; /* ODT configuration */
unsigned int num_pr; /* Number of posted refreshes */
unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */
unsigned int ap_en; /* Address Parity Enable */
@@ -625,15 +641,16 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
unsigned int rcw_en = 0; /* Register Control Word Enable */
unsigned int md_en = 0; /* Mirrored DIMM Enable */
unsigned int qd_en = 0; /* quad-rank DIMM Enable */
+ int i;
dll_rst_dis = 1; /* Make this configurable */
dqs_cfg = popts->DQS_config;
- if (popts->cs_local_opts[0].odt_rd_cfg
- || popts->cs_local_opts[0].odt_wr_cfg) {
- /* FIXME */
- odt_cfg = 2;
- } else {
- odt_cfg = 0;
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (popts->cs_local_opts[i].odt_rd_cfg
+ || popts->cs_local_opts[i].odt_wr_cfg) {
+ odt_cfg = SDRAM_CFG2_ODT_ONLY_READ;
+ break;
+ }
}
num_pr = 1; /* Make this configurable */
@@ -1018,7 +1035,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
#if defined(CONFIG_FSL_DDR2)
const unsigned int mclk_ps = get_memory_clk_period_ps();
#endif
-
+ dqs_en = !popts->DQS_config;
rtt = fsl_ddr_get_rtt();
al = additive_latency;
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index 8132e68d9..20c7db03e 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -448,7 +448,8 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
#if defined(CONFIG_FSL_DDR2)
if (lowest_good_caslat < 4) {
- additive_latency = picos_to_mclk(tRCD_ps) - lowest_good_caslat;
+ additive_latency = (picos_to_mclk(tRCD_ps) > lowest_good_caslat)
+ ? picos_to_mclk(tRCD_ps) - lowest_good_caslat : 0;
if (mclk_to_picos(additive_latency) > tRCD_ps) {
additive_latency = picos_to_mclk(tRCD_ps);
debug("setting additive_latency to %u because it was "
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index 249fd7dfb..5699b0c2c 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -34,14 +34,17 @@ extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
[0][0] = SPD_EEPROM_ADDRESS,
};
-#endif
-#if (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+ [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */
+ [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */
+};
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
[0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */
[1][0] = SPD_EEPROM_ADDRESS2, /* controller 2 */
};
-#endif
-#if (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
[0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */
[0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
index bd9c4663e..4dc748b95 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
@@ -26,14 +26,15 @@ extern void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num);
-typedef struct {
+struct dynamic_odt {
unsigned int odt_rd_cfg;
unsigned int odt_wr_cfg;
unsigned int odt_rtt_norm;
unsigned int odt_rtt_wr;
-} dynamic_odt_t;
+};
-static const dynamic_odt_t single_Q[4] = {
+#ifdef CONFIG_FSL_DDR3
+static const struct dynamic_odt single_Q[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS_AND_OTHER_DIMM,
@@ -60,7 +61,7 @@ static const dynamic_odt_t single_Q[4] = {
}
};
-static const dynamic_odt_t single_D[4] = {
+static const struct dynamic_odt single_D[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_ALL,
@@ -77,7 +78,7 @@ static const dynamic_odt_t single_D[4] = {
{0, 0, 0, 0}
};
-static const dynamic_odt_t single_S[4] = {
+static const struct dynamic_odt single_S[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_ALL,
@@ -89,7 +90,7 @@ static const dynamic_odt_t single_S[4] = {
{0, 0, 0, 0},
};
-static const dynamic_odt_t dual_DD[4] = {
+static const struct dynamic_odt dual_DD[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
@@ -116,7 +117,7 @@ static const dynamic_odt_t dual_DD[4] = {
}
};
-static const dynamic_odt_t dual_DS[4] = {
+static const struct dynamic_odt dual_DS[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
@@ -137,7 +138,7 @@ static const dynamic_odt_t dual_DS[4] = {
},
{0, 0, 0, 0}
};
-static const dynamic_odt_t dual_SD[4] = {
+static const struct dynamic_odt dual_SD[4] = {
{ /* cs0 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_ALL,
@@ -159,7 +160,7 @@ static const dynamic_odt_t dual_SD[4] = {
}
};
-static const dynamic_odt_t dual_SS[4] = {
+static const struct dynamic_odt dual_SS[4] = {
{ /* cs0 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_ALL,
@@ -176,7 +177,7 @@ static const dynamic_odt_t dual_SS[4] = {
{0, 0, 0, 0}
};
-static const dynamic_odt_t dual_D0[4] = {
+static const struct dynamic_odt dual_D0[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
@@ -193,7 +194,7 @@ static const dynamic_odt_t dual_D0[4] = {
{0, 0, 0, 0}
};
-static const dynamic_odt_t dual_0D[4] = {
+static const struct dynamic_odt dual_0D[4] = {
{0, 0, 0, 0},
{0, 0, 0, 0},
{ /* cs2 */
@@ -210,7 +211,7 @@ static const dynamic_odt_t dual_0D[4] = {
}
};
-static const dynamic_odt_t dual_S0[4] = {
+static const struct dynamic_odt dual_S0[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
@@ -223,7 +224,7 @@ static const dynamic_odt_t dual_S0[4] = {
};
-static const dynamic_odt_t dual_0S[4] = {
+static const struct dynamic_odt dual_0S[4] = {
{0, 0, 0, 0},
{0, 0, 0, 0},
{ /* cs2 */
@@ -236,7 +237,7 @@ static const dynamic_odt_t dual_0S[4] = {
};
-static const dynamic_odt_t odt_unknown[4] = {
+static const struct dynamic_odt odt_unknown[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
@@ -262,7 +263,218 @@ static const dynamic_odt_t odt_unknown[4] = {
DDR3_RTT_OFF
}
};
+#else /* CONFIG_FSL_DDR3 */
+static const struct dynamic_odt single_Q[4] = {
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt single_D[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+};
+static const struct dynamic_odt single_S[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+};
+
+static const struct dynamic_odt dual_DD[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ }
+};
+
+static const struct dynamic_odt dual_DS[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_SD[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ }
+};
+
+static const struct dynamic_odt dual_SS[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_D0[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_0D[4] = {
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ }
+};
+
+static const struct dynamic_odt dual_S0[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+
+};
+
+static const struct dynamic_odt dual_0S[4] = {
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0}
+
+};
+
+static const struct dynamic_odt odt_unknown[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ }
+};
+#endif
unsigned int populate_memctl_options(int all_DIMMs_registered,
memctl_options_t *popts,
dimm_params_t *pdimm,
@@ -271,7 +483,8 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
unsigned int i;
char buffer[HWCONFIG_BUFFER_SIZE];
char *buf = NULL;
- const dynamic_odt_t *pdodt = odt_unknown;
+ const struct dynamic_odt *pdodt = odt_unknown;
+ ulong ddr_freq;
/*
* Extract hwconfig from environment since we have not properly setup
@@ -336,7 +549,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
/* Pick chip-select local options. */
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-#if defined(CONFIG_FSL_DDR3)
+#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2)
popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg;
popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg;
popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm;
@@ -716,6 +929,20 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
if (pdimm[0].n_ranks == 4)
popts->quad_rank_present = 1;
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ if (popts->registered_dimm_en) {
+ popts->rcw_override = 1;
+ popts->rcw_1 = 0x000a5a00;
+ if (ddr_freq <= 800)
+ popts->rcw_2 = 0x00000000;
+ else if (ddr_freq <= 1066)
+ popts->rcw_2 = 0x00100000;
+ else if (ddr_freq <= 1333)
+ popts->rcw_2 = 0x00200000;
+ else
+ popts->rcw_2 = 0x00300000;
+ }
+
fsl_ddr_board_options(popts, pdimm, ctrl_num);
return 0;
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index 104d360a5..eb6a17a85 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -20,7 +20,8 @@
#define ULL_8FS 0xFFFFFFFFULL
/*
- * Round mclk_ps to nearest 10 ps in memory controller code.
+ * Round up mclk_ps to nearest 1 ps in memory controller code
+ * if the error is 0.5ps or more.
*
* If an imprecise data rate is too high due to rounding error
* propagation, compute a suitably rounded mclk_ps to compute
@@ -32,42 +33,37 @@ unsigned int get_memory_clk_period_ps(void)
unsigned int result;
/* Round to nearest 10ps, being careful about 64-bit multiply/divide */
- unsigned long long mclk_ps = ULL_2E12;
-
- /* Add 5*data_rate, for rounding */
- mclk_ps += 5*(unsigned long long)data_rate;
+ unsigned long long rem, mclk_ps = ULL_2E12;
/* Now perform the big divide, the result fits in 32-bits */
- do_div(mclk_ps, data_rate);
- result = mclk_ps;
+ rem = do_div(mclk_ps, data_rate);
+ result = (rem >= (data_rate >> 1)) ? mclk_ps + 1 : mclk_ps;
- /* We still need to round to 10ps */
- return 10 * (result/10);
+ return result;
}
/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
unsigned int picos_to_mclk(unsigned int picos)
{
unsigned long long clks, clks_rem;
+ unsigned long data_rate = get_ddr_freq(0);
/* Short circuit for zero picos */
if (!picos)
return 0;
/* First multiply the time by the data rate (32x32 => 64) */
- clks = picos * (unsigned long long)get_ddr_freq(0);
-
+ clks = picos * (unsigned long long)data_rate;
/*
* Now divide by 5^12 and track the 32-bit remainder, then divide
* by 2*(2^12) using shifts (and updating the remainder).
*/
clks_rem = do_div(clks, UL_5POW12);
- clks_rem <<= 13;
- clks_rem |= clks & (UL_2POW13-1);
+ clks_rem += (clks & (UL_2POW13-1)) * UL_5POW12;
clks >>= 13;
- /* If we had a remainder, then round up */
- if (clks_rem)
+ /* If we had a remainder greater than the 1ps error, then round up */
+ if (clks_rem > data_rate)
clks++;
/* Clamp to the maximum representable value */
@@ -133,10 +129,13 @@ fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
void board_add_ram_info(int use_default)
{
-#if defined(CONFIG_MPC85xx)
- volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+#if defined(CONFIG_MPC83xx)
+ immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ ccsr_ddr_t *ddr = (void *)&immap->ddr;
+#elif defined(CONFIG_MPC85xx)
+ ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
#elif defined(CONFIG_MPC86xx)
- volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR);
+ ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR);
#endif
#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
uint32_t cs0_config = in_be32(&ddr->cs0_config);
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 285051d96..5bb9f5354 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -63,7 +63,7 @@ void ft_fixup_num_cores(void *blob) {
while (off != -FDT_ERR_NOTFOUND) {
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- if ((*reg > num_cores-1) || (is_core_disabled(*reg))) {
+ if (!is_core_valid(*reg) || is_core_disabled(*reg)) {
int ph = fdt_get_phandle(blob, off);
/* Delete the cpu node once there are no cpu handles */
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
index e79482130..66824960d 100644
--- a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
@@ -43,10 +43,12 @@ void init_early_memctl_regs(void)
set_ifc_ftim(IFC_CS0, IFC_FTIM2, CONFIG_SYS_CS0_FTIM2);
set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3);
+#if !defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) || defined(CONFIG_SYS_RAMBOOT)
set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0);
set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0);
#endif
+#endif
#if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1)
set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0);
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index 9aad9be1b..d13863693 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -42,7 +42,10 @@
#define CONFIG_SYS_BOOT_GET_KBD
#ifndef CONFIG_MAX_MEM_MAPPED
-#if defined(CONFIG_4xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_4xx) || \
+ defined(CONFIG_E500) || \
+ defined(CONFIG_MPC86xx) || \
+ defined(CONFIG_E300)
#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
#else
#define CONFIG_MAX_MEM_MAPPED (256 << 20)
@@ -96,6 +99,11 @@
#endif /* TSEC_ENET */
#endif /* !CONFIG_PHYLIB */
+/* The FMAN driver uses the PHYLIB infrastructure */
+#if defined(CONFIG_FMAN_ENET)
+#define CONFIG_PHYLIB
+#endif
+
/* All PPC boards must swap IDE bytes */
#define CONFIG_IDE_SWAP_IO
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 04ca989b0..c3d6ba9e9 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -23,6 +23,10 @@
/* SoC specific defines for Freescale MPC85xx (PQ3) and QorIQ processors */
+#ifdef CONFIG_SYS_CCSRBAR_DEFAULT
+#error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
+#endif
+
/* Number of TLB CAM entries we have on FSL Book-E chips */
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
@@ -34,34 +38,43 @@
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8540)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8541)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8544)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8548)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
+#define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+#define CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
#elif defined(CONFIG_MPC8555)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8560)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8568)
#define CONFIG_MAX_CPUS 1
@@ -70,6 +83,7 @@
#define QE_MURAM_SIZE 0x10000UL
#define MAX_QE_RISC 2
#define QE_NUM_OF_SNUM 28
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8569)
#define CONFIG_MAX_CPUS 1
@@ -78,11 +92,13 @@
#define QE_MURAM_SIZE 0x20000UL
#define MAX_QE_RISC 4
#define QE_NUM_OF_SNUM 46
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8572)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_DDR_115
#define CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
@@ -97,6 +113,10 @@
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
+#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
+#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
/* P1011 is single core version of P1020 */
#elif defined(CONFIG_P1011)
@@ -105,6 +125,7 @@
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -115,6 +136,7 @@
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define QE_MURAM_SIZE 0x6000UL
@@ -127,6 +149,7 @@
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_FSL_SATA_ERRATUM_A001
@@ -141,6 +164,10 @@
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
+#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
+#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
/* P1015 is single core version of P1024 */
#elif defined(CONFIG_P1015)
@@ -149,6 +176,7 @@
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -164,6 +192,7 @@
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
/* P1017 is single core version of P1023 */
#elif defined(CONFIG_P1017)
@@ -177,6 +206,7 @@
#define CONFIG_SYS_BMAN_NUM_PORTALS 3
#define CONFIG_SYS_FM_MURAM_SIZE 0x10000
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000
#elif defined(CONFIG_P1020)
#define CONFIG_MAX_CPUS 2
@@ -184,6 +214,7 @@
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -193,6 +224,7 @@
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define QE_MURAM_SIZE 0x6000UL
@@ -204,6 +236,7 @@
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_FSL_SATA_ERRATUM_A001
@@ -219,6 +252,7 @@
#define CONFIG_SYS_BMAN_NUM_PORTALS 3
#define CONFIG_SYS_FM_MURAM_SIZE 0x10000
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000
/* P1024 is lower end variant of P1020 */
#elif defined(CONFIG_P1024)
@@ -227,6 +261,7 @@
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -237,6 +272,7 @@
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define QE_MURAM_SIZE 0x6000UL
@@ -248,6 +284,7 @@
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
@@ -255,6 +292,7 @@
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
@@ -269,8 +307,10 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#elif defined(CONFIG_PPC_P2041)
@@ -285,8 +325,10 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#elif defined(CONFIG_PPC_P3041)
@@ -301,10 +343,27 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#elif defined(CONFIG_PPC_P3060)
+#define CONFIG_MAX_CPUS 8
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
+#define CONFIG_SYS_FSL_NUM_LAWS 32
+#define CONFIG_SYS_FSL_SEC_COMPAT 4
+#define CONFIG_SYS_NUM_FMAN 2
+#define CONFIG_SYS_NUM_FM1_DTSEC 4
+#define CONFIG_SYS_NUM_FM2_DTSEC 4
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
+#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
+
#elif defined(CONFIG_PPC_P4040)
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
@@ -313,6 +372,7 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,p4080-pcie"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#elif defined(CONFIG_PPC_P4080)
#define CONFIG_MAX_CPUS 8
@@ -328,6 +388,7 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,p4080-pcie"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_ERRATUM_CPC_A002
#define CONFIG_SYS_FSL_ERRATUM_CPC_A003
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
@@ -354,8 +415,10 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#elif defined(CONFIG_PPC_P5020)
@@ -370,12 +433,18 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#else
#error Processor type not defined for this platform
#endif
+#ifndef CONFIG_SYS_CCSRBAR_DEFAULT
+#error "CONFIG_SYS_CCSRBAR_DEFAULT is not defined for this platform."
+#endif
+
#endif /* _ASM_MPC85xx_CONFIG_H_ */
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index bc063ea89..93639ba85 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -31,6 +31,11 @@
#define DDR3_RTT_20_OHM 4 /* RTT_Nom = RZQ/12 */
#define DDR3_RTT_30_OHM 5 /* RTT_Nom = RZQ/8 */
+#define DDR2_RTT_OFF 0
+#define DDR2_RTT_75_OHM 1
+#define DDR2_RTT_150_OHM 2
+#define DDR2_RTT_50_OHM 3
+
#if defined(CONFIG_FSL_DDR1)
#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (1)
typedef ddr1_spd_eeprom_t generic_spd_eeprom_t;
@@ -92,6 +97,10 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
#define SDRAM_CFG2_D_INIT 0x00000010
#define SDRAM_CFG2_ODT_CFG_MASK 0x00600000
+#define SDRAM_CFG2_ODT_NEVER 0
+#define SDRAM_CFG2_ODT_ONLY_WRITE 1
+#define SDRAM_CFG2_ODT_ONLY_READ 2
+#define SDRAM_CFG2_ODT_ALWAYS 3
#define TIMING_CFG_2_CPO_MASK 0x0F800000
diff --git a/arch/powerpc/include/asm/fsl_dtsec.h b/arch/powerpc/include/asm/fsl_dtsec.h
new file mode 100644
index 000000000..d1d993c5a
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_dtsec.h
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __DTSEC_H__
+#define __DTSEC_H__
+
+#include <asm/types.h>
+
+struct dtsec {
+ u32 tsec_id; /* controller ID and version */
+ u32 tsec_id2; /* controller ID and configuration */
+ u32 ievent; /* interrupt event */
+ u32 imask; /* interrupt mask */
+ u32 res0;
+ u32 ecntrl; /* ethernet control and configuration */
+ u32 ptv; /* pause time value */
+ u32 tbipa; /* TBI PHY address */
+ u32 res1[8];
+ u32 tctrl; /* Transmit control register */
+ u32 res2[3];
+ u32 rctrl; /* Receive control register */
+ u32 res3[11];
+ u32 igaddr[8]; /* Individual group address */
+ u32 gaddr[8]; /* group address */
+ u32 res4[16];
+ u32 maccfg1; /* MAC configuration register 1 */
+ u32 maccfg2; /* MAC configuration register 2 */
+ u32 ipgifg; /* inter-packet/inter-frame gap */
+ u32 hafdup; /* half-duplex control */
+ u32 maxfrm; /* Maximum frame size */
+ u32 res5[3];
+ u32 miimcfg; /* MII management configuration */
+ u32 miimcom; /* MII management command */
+ u32 miimadd; /* MII management address */
+ u32 miimcon; /* MII management control */
+ u32 miimstat; /* MII management status */
+ u32 miimind; /* MII management indicator */
+ u32 res6;
+ u32 ifstat; /* Interface status */
+ u32 macstnaddr1; /* MAC station address 1 */
+ u32 macstnaddr2; /* MAC station address 2 */
+ u32 res7[46];
+ /* transmit and receive counter */
+ u32 tr64; /* Tx and Rx 64 bytes frame */
+ u32 tr127; /* Tx and Rx 65 to 127 bytes frame */
+ u32 tr255; /* Tx and Rx 128 to 255 bytes frame */
+ u32 tr511; /* Tx and Rx 256 to 511 bytes frame */
+ u32 tr1k; /* Tx and Rx 512 to 1023 bytes frame */
+ u32 trmax; /* Tx and Rx 1024 to 1518 bytes frame */
+ u32 trmgv; /* Tx and Rx 1519 to 1522 good VLAN frame */
+ /* receive counters */
+ u32 rbyt; /* Receive byte counter */
+ u32 rpkt; /* Receive packet counter */
+ u32 rfcs; /* Receive FCS error */
+ u32 rmca; /* Receive multicast packet */
+ u32 rbca; /* Receive broadcast packet */
+ u32 rxcf; /* Receive control frame */
+ u32 rxpf; /* Receive pause frame */
+ u32 rxuo; /* Receive unknown OP code */
+ u32 raln; /* Receive alignment error */
+ u32 rflr; /* Receive frame length error */
+ u32 rcde; /* Receive code error */
+ u32 rcse; /* Receive carrier sense error */
+ u32 rund; /* Receive undersize packet */
+ u32 rovr; /* Receive oversize packet */
+ u32 rfrg; /* Receive fragments counter */
+ u32 rjbr; /* Receive jabber counter */
+ u32 rdrp; /* Receive drop counter */
+ /* transmit counters */
+ u32 tbyt; /* Transmit byte counter */
+ u32 tpkt; /* Transmit packet */
+ u32 tmca; /* Transmit multicast packet */
+ u32 tbca; /* Transmit broadcast packet */
+ u32 txpf; /* Transmit pause control frame */
+ u32 tdfr; /* Transmit deferral packet */
+ u32 tedf; /* Transmit excessive deferral pkt */
+ u32 tscl; /* Transmit single collision pkt */
+ u32 tmcl; /* Transmit multiple collision pkt */
+ u32 tlcl; /* Transmit late collision pkt */
+ u32 txcl; /* Transmit excessive collision */
+ u32 tncl; /* Transmit total collision */
+ u32 res8;
+ u32 tdrp; /* Transmit drop frame */
+ u32 tjbr; /* Transmit jabber frame */
+ u32 tfcs; /* Transmit FCS error */
+ u32 txcf; /* Transmit control frame */
+ u32 tovr; /* Transmit oversize frame */
+ u32 tund; /* Transmit undersize frame */
+ u32 tfrg; /* Transmit fragments frame */
+ /* counter controls */
+ u32 car1; /* carry register 1 */
+ u32 car2; /* carry register 2 */
+ u32 cam1; /* carry register 1 mask */
+ u32 cam2; /* carry register 2 mask */
+ u32 res9[80];
+};
+
+
+/* TBI register addresses */
+#define TBI_CR 0x00
+#define TBI_SR 0x01
+#define TBI_ANA 0x04
+#define TBI_ANLPBPA 0x05
+#define TBI_ANEX 0x06
+#define TBI_TBICON 0x11
+
+/* TBI MDIO register bit fields*/
+#define TBICON_CLK_SELECT 0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE 0x0080
+#define TBIANA_HALF_DUPLEX 0x0040
+#define TBIANA_FULL_DUPLEX 0x0020
+#define TBICR_PHY_RESET 0x8000
+#define TBICR_ANEG_ENABLE 0x1000
+#define TBICR_RESTART_ANEG 0x0200
+#define TBICR_FULL_DUPLEX 0x0100
+#define TBICR_SPEED1_SET 0x0040
+
+/* IEVENT - interrupt events register */
+#define IEVENT_BABR 0x80000000 /* Babbling receive error */
+#define IEVENT_RXC 0x40000000 /* pause control frame received */
+#define IEVENT_MSRO 0x04000000 /* MIB counter overflow */
+#define IEVENT_GTSC 0x02000000 /* Graceful transmit stop complete */
+#define IEVENT_BABT 0x01000000 /* Babbling transmit error */
+#define IEVENT_TXC 0x00800000 /* control frame transmitted */
+#define IEVENT_TXE 0x00400000 /* Transmit channel error */
+#define IEVENT_LC 0x00040000 /* Late collision occurred */
+#define IEVENT_CRL 0x00020000 /* Collision retry exceed limit */
+#define IEVENT_XFUN 0x00010000 /* Transmit FIFO underrun */
+#define IEVENT_ABRT 0x00008000 /* Transmit packet abort */
+#define IEVENT_MMRD 0x00000400 /* MII management read complete */
+#define IEVENT_MMWR 0x00000200 /* MII management write complete */
+#define IEVENT_GRSC 0x00000100 /* Graceful stop complete */
+#define IEVENT_TDPE 0x00000002 /* Internal data parity error on Tx */
+#define IEVENT_RDPE 0x00000001 /* Internal data parity error on Rx */
+
+#define IEVENT_CLEAR_ALL 0xffffffff
+
+/* IMASK - interrupt mask register */
+#define IMASK_BREN 0x80000000 /* Babbling receive enable */
+#define IMASK_RXCEN 0x40000000 /* receive control enable */
+#define IMASK_MSROEN 0x04000000 /* MIB counter overflow enable */
+#define IMASK_GTSCEN 0x02000000 /* Graceful Tx stop complete enable */
+#define IMASK_BTEN 0x01000000 /* Babbling transmit error enable */
+#define IMASK_TXCEN 0x00800000 /* control frame transmitted enable */
+#define IMASK_TXEEN 0x00400000 /* Transmit channel error enable */
+#define IMASK_LCEN 0x00040000 /* Late collision interrupt enable */
+#define IMASK_CRLEN 0x00020000 /* Collision retry exceed limit */
+#define IMASK_XFUNEN 0x00010000 /* Transmit FIFO underrun enable */
+#define IMASK_ABRTEN 0x00008000 /* Transmit packet abort enable */
+#define IMASK_MMRDEN 0x00000400 /* MII management read complete enable */
+#define IMASK_MMWREN 0x00000200 /* MII management write complete enable */
+#define IMASK_GRSCEN 0x00000100 /* Graceful stop complete interrupt enable */
+#define IMASK_TDPEEN 0x00000002 /* Internal data parity error on Tx enable */
+#define IMASK_RDPEEN 0x00000001 /* Internal data parity error on Rx enable */
+
+#define IMASK_MASK_ALL 0x00000000
+
+/* ECNTRL - ethernet control register */
+#define ECNTRL_CFG_RO 0x80000000 /* GMIIM, RPM, R100M, SGMIIM bits are RO */
+#define ECNTRL_CLRCNT 0x00004000 /* clear all statistics */
+#define ECNTRL_AUTOZ 0x00002000 /* auto zero MIB counter */
+#define ECNTRL_STEN 0x00001000 /* enable internal counters to update */
+#define ECNTRL_GMIIM 0x00000040 /* 1- GMII or RGMII interface mode */
+#define ECNTRL_TBIM 0x00000020 /* 1- Ten-bit interface mode */
+#define ECNTRL_RPM 0x00000010 /* 1- RGMII reduced-pin mode */
+#define ECNTRL_R100M 0x00000008 /* 1- RGMII 100 Mbps, SGMII 100 Mbps
+ 0- RGMII 10 Mbps, SGMII 10 Mbps */
+#define ECNTRL_SGMIIM 0x00000002 /* 1- SGMII interface mode */
+#define ECNTRL_TBIM 0x00000020 /* 1- TBI Interface mode (for SGMII) */
+
+#define ECNTRL_DEFAULT (ECNTRL_TBIM | ECNTRL_R100M | ECNTRL_SGMIIM)
+
+/* TCTRL - Transmit control register */
+#define TCTRL_THDF 0x00000800 /* Transmit half-duplex flow control */
+#define TCTRL_TTSE 0x00000040 /* Transmit time-stamp enable */
+#define TCTRL_GTS 0x00000020 /* Graceful transmit stop */
+#define TCTRL_RFC_PAUSE 0x00000010 /* Receive flow control pause frame */
+
+/* RCTRL - Receive control register */
+#define RCTRL_PAL_MASK 0x001f0000 /* packet alignment padding length */
+#define RCTRL_PAL_SHIFT 16
+#define RCTRL_CFA 0x00008000 /* control frame accept enable */
+#define RCTRL_GHTX 0x00000800 /* group address hash table extend */
+#define RCTRL_RTSE 0x00000040 /* receive 1588 time-stamp enable */
+#define RCTRL_GRS 0x00000020 /* graceful receive stop */
+#define RCTRL_BC_REJ 0x00000010 /* broadcast frame reject */
+#define RCTRL_BC_MPROM 0x00000008 /* all multicast/broadcast frames received */
+#define RCTRL_RSF 0x00000004 /* receive short frame(17~63 bytes) enable */
+#define RCTRL_EMEN 0x00000002 /* Exact match MAC address enable */
+#define RCTRL_UPROM 0x00000001 /* all unicast frame received */
+
+/* MACCFG1 - MAC configuration 1 register */
+#define MACCFG1_SOFT_RST 0x80000000 /* place the MAC in reset */
+#define MACCFG1_RST_RXMAC 0x00080000 /* reset receive MAC control block */
+#define MACCFG1_RST_TXMAC 0x00040000 /* reet transmit MAC control block */
+#define MACCFG1_RST_RXFUN 0x00020000 /* reset receive function block */
+#define MACCFG1_RST_TXFUN 0x00010000 /* reset transmit function block */
+#define MACCFG1_LOOPBACK 0x00000100 /* MAC loopback */
+#define MACCFG1_RX_FLOW 0x00000020 /* Receive flow */
+#define MACCFG1_TX_FLOW 0x00000010 /* Transmit flow */
+#define MACCFG1_SYNC_RXEN 0x00000008 /* Frame reception enabled */
+#define MACCFG1_RX_EN 0x00000004 /* Rx enable */
+#define MACCFG1_SYNC_TXEN 0x00000002 /* Frame transmission is enabled */
+#define MACCFG1_TX_EN 0x00000001 /* Tx enable */
+#define MACCFG1_RXTX_EN (MACCFG1_RX_EN | MACCFG1_TX_EN)
+
+/* MACCFG2 - MAC configuration 2 register */
+#define MACCFG2_PRE_LEN_MASK 0x0000f000 /* preamble length */
+#define MACCFG2_PRE_LEN(x) ((x << 12) & MACCFG2_PRE_LEN_MASK)
+#define MACCFG2_IF_MODE_MASK 0x00000300
+#define MACCFG2_IF_MODE_NIBBLE 0x00000100 /* MII, 10/100 Mbps MII/RMII */
+#define MACCFG2_IF_MODE_BYTE 0x00000200 /* GMII/TBI, 1000 GMII/TBI */
+#define MACCFG2_PRE_RX_EN 0x00000080 /* receive preamble enable */
+#define MACCFG2_PRE_TX_EN 0x00000040 /* tx preable enable */
+#define MACCFG2_HUGE_FRAME 0x00000020 /* >= max frame len enable */
+#define MACCFG2_LEN_CHECK 0x00000010 /* MAC check frame's length Rx */
+#define MACCFG2_MAG_EN 0x00000008 /* magic packet enable */
+#define MACCFG2_PAD_CRC 0x00000004 /* pad and append CRC */
+#define MACCFG2_CRC_EN 0x00000002 /* MAC appends a CRC on all frames */
+#define MACCFG2_FULL_DUPLEX 0x00000001 /* Full deplex mode */
+
+struct fsl_enet_mac;
+
+void init_dtsec(struct fsl_enet_mac *mac, void *base, void *phyregs,
+ int max_rx_len);
+
+#endif
diff --git a/arch/powerpc/include/asm/fsl_fman.h b/arch/powerpc/include/asm/fsl_fman.h
index 6c01ffc41..fddc0cc8c 100644
--- a/arch/powerpc/include/asm/fsl_fman.h
+++ b/arch/powerpc/include/asm/fsl_fman.h
@@ -1,7 +1,7 @@
/*
* MPC85xx Internal Memory Map
*
- * Copyright 2010 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -82,6 +82,189 @@ typedef struct fm_qmi {
u8 res[1024];
} fm_qmi_t;
+struct fm_bmi_rx_port {
+ u32 fmbm_rcfg; /* Rx configuration */
+ u32 fmbm_rst; /* Rx status */
+ u32 fmbm_rda; /* Rx DMA attributes */
+ u32 fmbm_rfp; /* Rx FIFO parameters */
+ u32 fmbm_rfed; /* Rx frame end data */
+ u32 fmbm_ricp; /* Rx internal context parameters */
+ u32 fmbm_rim; /* Rx internal margins */
+ u32 fmbm_rebm; /* Rx external buffer margins */
+ u32 fmbm_rfne; /* Rx frame next engine */
+ u32 fmbm_rfca; /* Rx frame command attributes */
+ u32 fmbm_rfpne; /* Rx frame parser next engine */
+ u32 fmbm_rpso; /* Rx parse start offset */
+ u32 fmbm_rpp; /* Rx policer profile */
+ u32 fmbm_rccb; /* Rx coarse classification base */
+ u32 res1[0x2];
+ u32 fmbm_rprai[0x8]; /* Rx parse results array Initialization */
+ u32 fmbm_rfqid; /* Rx frame queue ID */
+ u32 fmbm_refqid; /* Rx error frame queue ID */
+ u32 fmbm_rfsdm; /* Rx frame status discard mask */
+ u32 fmbm_rfsem; /* Rx frame status error mask */
+ u32 fmbm_rfene; /* Rx frame enqueue next engine */
+ u32 res2[0x23];
+ u32 fmbm_ebmpi[0x8]; /* buffer manager pool information */
+ u32 fmbm_acnt[0x8]; /* allocate counter */
+ u32 res3[0x8];
+ u32 fmbm_cgm[0x8]; /* congestion group map */
+ u32 fmbm_mpd; /* BMan pool depletion */
+ u32 res4[0x1F];
+ u32 fmbm_rstc; /* Rx statistics counters */
+ u32 fmbm_rfrc; /* Rx frame counters */
+ u32 fmbm_rfbc; /* Rx bad frames counter */
+ u32 fmbm_rlfc; /* Rx large frames counter */
+ u32 fmbm_rffc; /* Rx filter frames counter */
+ u32 fmbm_rfdc; /* Rx frame discard counter */
+ u32 fmbm_rfldec; /* Rx frames list DMA error counter */
+ u32 fmbm_rodc; /* Rx out of buffers discard counter */
+ u32 fmbm_rbdc; /* Rx buffers deallocate counter */
+ u32 res5[0x17];
+ u32 fmbm_rpc; /* Rx performance counters */
+ u32 fmbm_rpcp; /* Rx performance count parameters */
+ u32 fmbm_rccn; /* Rx cycle counter */
+ u32 fmbm_rtuc; /* Rx tasks utilization counter */
+ u32 fmbm_rrquc; /* Rx receive queue utilization counter */
+ u32 fmbm_rduc; /* Rx DMA utilization counter */
+ u32 fmbm_rfuc; /* Rx FIFO utilization counter */
+ u32 fmbm_rpac; /* Rx pause activation counter */
+ u32 res6[0x18];
+ u32 fmbm_rdbg; /* Rx debug configuration */
+};
+
+/* FMBM_RCFG - Rx configuration */
+#define FMBM_RCFG_EN 0x80000000 /* port is enabled to receive data */
+#define FMBM_RCFG_FDOVR 0x02000000 /* frame discard override */
+#define FMBM_RCFG_IM 0x01000000 /* independent mode */
+
+/* FMBM_RST - Rx status */
+#define FMBM_RST_BSY 0x80000000 /* Rx port is busy */
+
+/* FMBM_RFCA - Rx frame command attributes */
+#define FMBM_RFCA_ORDER 0x80000000
+#define FMBM_RFCA_MR_MASK 0x003f0000
+#define FMBM_RFCA_MR(x) ((x << 16) & FMBM_RFCA_MR_MASK)
+
+/* FMBM_RSTC - Rx statistics */
+#define FMBM_RSTC_EN 0x80000000 /* statistics counters enable */
+
+struct fm_bmi_tx_port {
+ u32 fmbm_tcfg; /* Tx configuration */
+ u32 fmbm_tst; /* Tx status */
+ u32 fmbm_tda; /* Tx DMA attributes */
+ u32 fmbm_tfp; /* Tx FIFO parameters */
+ u32 fmbm_tfed; /* Tx frame end data */
+ u32 fmbm_ticp; /* Tx internal context parameters */
+ u32 fmbm_tfne; /* Tx frame next engine */
+ u32 fmbm_tfca; /* Tx frame command attributes */
+ u32 fmbm_tcfqid;/* Tx confirmation frame queue ID */
+ u32 fmbm_tfeqid;/* Tx error frame queue ID */
+ u32 fmbm_tfene; /* Tx frame enqueue next engine */
+ u32 fmbm_trlmts;/* Tx rate limiter scale */
+ u32 fmbm_trlmt; /* Tx rate limiter */
+ u32 res0[0x73];
+ u32 fmbm_tstc; /* Tx statistics counters */
+ u32 fmbm_tfrc; /* Tx frame counter */
+ u32 fmbm_tfdc; /* Tx frames discard counter */
+ u32 fmbm_tfledc;/* Tx frame length error discard counter */
+ u32 fmbm_tfufdc;/* Tx frame unsupported format discard counter */
+ u32 fmbm_tbdc; /* Tx buffers deallocate counter */
+ u32 res1[0x1a];
+ u32 fmbm_tpc; /* Tx performance counters */
+ u32 fmbm_tpcp; /* Tx performance count parameters */
+ u32 fmbm_tccn; /* Tx cycle counter */
+ u32 fmbm_ttuc; /* Tx tasks utilization counter */
+ u32 fmbm_ttcquc;/* Tx transmit confirm queue utilization counter */
+ u32 fmbm_tduc; /* Tx DMA utilization counter */
+ u32 fmbm_tfuc; /* Tx FIFO utilization counter */
+ u32 res2[0x19];
+ u32 fmbm_tdcfg; /* Tx debug configuration */
+};
+
+/* FMBM_TCFG - Tx configuration */
+#define FMBM_TCFG_EN 0x80000000 /* port is enabled to transmit data */
+#define FMBM_TCFG_IM 0x01000000 /* independent mode enable */
+
+/* FMBM_TST - Tx status */
+#define FMBM_TST_BSY 0x80000000 /* Tx port is busy */
+
+/* FMBM_TFCA - Tx frame command attributes */
+#define FMBM_TFCA_ORDER 0x80000000
+#define FMBM_TFCA_MR_MASK 0x003f0000
+#define FMBM_TFCA_MR(x) ((x << 16) & FMBM_TFCA_MR_MASK)
+
+/* FMBM_TSTC - Tx statistics counters */
+#define FMBM_TSTC_EN 0x80000000
+
+/* FMBM_INIT - BMI initialization register */
+#define FMBM_INIT_START 0x80000000 /* init internal buffers */
+
+/* FMBM_CFG1 - BMI configuration 1 */
+#define FMBM_CFG1_FBPS_MASK 0x03ff0000 /* Free buffer pool size */
+#define FMBM_CFG1_FBPS_SHIFT 16
+#define FMBM_CFG1_FBPO_MASK 0x000003ff /* Free buffer pool offset */
+
+/* FMBM_IEVR - interrupt event */
+#define FMBM_IEVR_PEC 0x80000000 /* pipeline table ECC err detected */
+#define FMBM_IEVR_LEC 0x40000000 /* linked list RAM ECC error */
+#define FMBM_IEVR_SEC 0x20000000 /* statistics count RAM ECC error */
+#define FMBM_IEVR_CLEAR_ALL (FMBM_IEVR_PEC | FMBM_IEVR_LEC | FMBM_IEVR_SEC)
+
+/* FMBM_IER - interrupt enable */
+#define FMBM_IER_PECE 0x80000000 /* PEC interrupt enable */
+#define FMBM_IER_LECE 0x40000000 /* LEC interrupt enable */
+#define FMBM_IER_SECE 0x20000000 /* SEC interrupt enable */
+
+#define FMBM_IER_DISABLE_ALL 0x00000000
+
+/* FMBM_PP - BMI Port Parameters */
+#define FMBM_PP_MXT_MASK 0x3f000000 /* Max # tasks */
+#define FMBM_PP_MXT(x) (((x-1) << 24) & FMBM_PP_MXT_MASK)
+#define FMBM_PP_MXD_MASK 0x00000f00 /* Max DMA */
+#define FMBM_PP_MXD(x) (((x-1) << 8) & FMBM_PP_MXD_MASK)
+
+/* FMBM_PFS - BMI Port FIFO Size */
+#define FMBM_PFS_IFSZ_MASK 0x000003ff /* Internal Fifo Size */
+#define FMBM_PFS_IFSZ(x) (x & FMBM_PFS_IFSZ_MASK)
+
+/* FMQM_GC - global configuration */
+#define FMQM_GC_ENQ_EN 0x80000000 /* enqueue enable */
+#define FMQM_GC_DEQ_EN 0x40000000 /* dequeue enable */
+#define FMQM_GC_STEN 0x10000000 /* enable global stat counters */
+#define FMQM_GC_ENQ_THR_MASK 0x00003f00 /* max number of enqueue Tnum */
+#define FMQM_GC_ENQ(x) ((x << 8) & FMQM_GC_ENQ_THR_MAS)
+#define FMQM_GC_DEQ_THR_MASK 0x0000003f /* max number of dequeue Tnum */
+#define FMQM_GC_DEQ(x) (x & FMQM_GC_DEQ_THR_MASK)
+
+/* FMQM_EIE - error interrupt event register */
+#define FMQM_EIE_DEE 0x80000000 /* double-bit ECC error */
+#define FMQM_EIE_DFUPE 0x40000000 /* dequeue from unknown PortID */
+#define FMQM_EIE_CLEAR_ALL (FMQM_EIE_DEE | FMQM_EIE_DFUPE)
+
+/* FMQM_EIEN - error interrupt enable register */
+#define FMQM_EIEN_DEEN 0x80000000 /* double-bit ECC error */
+#define FMQM_EIEN_DFUPEN 0x40000000 /* dequeue from unknown PortID */
+#define FMQM_EIEN_DISABLE_ALL 0x00000000
+
+/* FMQM_IE - interrupt event register */
+#define FMQM_IE_SEE 0x80000000 /* single-bit ECC error detected */
+#define FMQM_IE_CLEAR_ALL FMQM_IE_SEE
+
+/* FMQM_IEN - interrupt enable register */
+#define FMQM_IEN_SEE 0x80000000 /* single-bit ECC err IRQ enable */
+#define FMQM_IEN_DISABLE_ALL 0x00000000
+
+/* NIA - next invoked action */
+#define NIA_ENG_RISC 0x00000000
+#define NIA_ENG_MASK 0x007c0000
+
+/* action code */
+#define NIA_RISC_AC_CC 0x00000006
+#define NIA_RISC_AC_IM_TX 0x00000008 /* independent mode Tx */
+#define NIA_RISC_AC_IM_RX 0x0000000a /* independent mode Rx */
+#define NIA_RISC_AC_HC 0x0000000c
+
typedef struct fm_parser {
u8 res[1024];
} fm_parser_t;
@@ -113,6 +296,27 @@ typedef struct fm_dma {
u32 res[0x3c8];
} fm_dma_t;
+/* FMDMSR - Fman DMA status register */
+#define FMDMSR_CMDQNE 0x10000000 /* command queue not empty */
+#define FMDMSR_BER 0x08000000 /* bus err event occurred on bus */
+#define FMDMSR_RDB_ECC 0x04000000 /* read buffer ECC error */
+#define FMDMSR_WRB_SECC 0x02000000 /* write buf ECC err sys side */
+#define FMDMSR_WRB_FECC 0x01000000 /* write buf ECC err Fman side */
+#define FMDMSR_DPEXT_SECC 0x00800000 /* DP external ECC err sys side */
+#define FMDMSR_DPEXT_FECC 0x00400000 /* DP external ECC err Fman side */
+#define FMDMSR_DPDAT_SECC 0x00200000 /* DP data ECC err on sys side */
+#define FMDMSR_DPDAT_FECC 0x00100000 /* DP data ECC err on Fman side */
+#define FMDMSR_SPDAT_FECC 0x00080000 /* SP data ECC error Fman side */
+
+#define FMDMSR_CLEAR_ALL (FMDMSR_BER | FMDMSR_RDB_ECC \
+ | FMDMSR_WRB_SECC | FMDMSR_WRB_FECC \
+ | FMDMSR_DPEXT_SECC | FMDMSR_DPEXT_FECC \
+ | FMDMSR_DPDAT_SECC | FMDMSR_DPDAT_FECC \
+ | FMDMSR_SPDAT_FECC)
+
+/* FMDMMR - FMan DMA mode register */
+#define FMDMMR_SBER 0x10000000 /* stop the DMA if a bus error */
+
typedef struct fm_fpm {
u32 fpmtnc; /* TNUM control */
u32 fpmprc; /* Port_ID control */
@@ -141,7 +345,7 @@ typedef struct fm_fpm {
u32 fmcld; /* classifier debug control */
u32 fmnpi; /* normal pending interrupts */
u32 res5;
- u32 fmnee; /* event and enable */
+ u32 fmfpee; /* event and enable */
u32 fpmcev[0x4]; /* CPU event 0-3 */
u32 res6[0x4];
u32 fmfp_ps[0x40]; /* port status */
@@ -150,9 +354,47 @@ typedef struct fm_fpm {
u32 res8[0xa0];
} fm_fpm_t;
+/* FMFP_PRC - FPM Port_ID Control Register */
+#define FMFPPRC_PORTID_MASK 0x3f000000
+#define FMFPPRC_PORTID_SHIFT 24
+#define FMFPPRC_ORA_SHIFT 16
+#define FMFPPRC_RISC1 0x00000001
+#define FMFPPRC_RISC2 0x00000002
+#define FMFPPRC_RISC_ALL (FMFPPRC_RISC1 | FMFPPRC_RSIC2)
+
+/* FPM Flush Control Register */
+#define FMFP_FLC_DISP_LIM_NONE 0x00000000 /* no dispatch limitation */
+
+/* FMFP_EE - FPM event and enable register */
+#define FMFPEE_DECC 0x80000000 /* double ECC err on FPM ram */
+#define FMFPEE_STL 0x40000000 /* stall of task ... */
+#define FMFPEE_SECC 0x20000000 /* single ECC error */
+#define FMFPEE_RFM 0x00010000 /* release FMan */
+#define FMFPEE_DECC_EN 0x00008000 /* double ECC interrupt enable */
+#define FMFPEE_STL_EN 0x00004000 /* stall of task interrupt enable */
+#define FMFPEE_SECC_EN 0x00002000 /* single ECC err interrupt enable */
+#define FMFPEE_EHM 0x00000008 /* external halt enable */
+#define FMFPEE_UEC 0x00000004 /* FMan is not halted */
+#define FMFPEE_CER 0x00000002 /* only errornous task stalled */
+#define FMFPEE_DER 0x00000001 /* DMA error is just reported */
+
+#define FMFPEE_CLEAR_EVENT (FMFPEE_DECC | FMFPEE_STL | FMFPEE_SECC | \
+ FMFPEE_EHM | FMFPEE_UEC | FMFPEE_CER | \
+ FMFPEE_DER | FMFPEE_RFM)
+
+/* FMFP_RCR - FMan Rams Control and Event */
+#define FMFP_RCR_MDEC 0x00008000 /* double ECC error in muram */
+#define FMFP_RCR_IDEC 0x00004000 /* double ECC error in iram */
+
typedef struct fm_imem {
- u8 res[4*1024];
+ u32 iadd; /* instruction address register */
+ u32 idata; /* instruction data register */
+ u32 itcfg; /* timing config register */
+ u32 iready; /* ready register */
+ u8 res[0xff0];
} fm_imem_t;
+#define IRAM_IADD_AIE 0x80000000 /* address auto increase enable */
+#define IRAM_READY 0x80000000 /* ready to use */
typedef struct fm_soft_parser {
u8 res[4*1024];
@@ -200,10 +442,11 @@ typedef struct ccsr_fman {
struct {
fm_dtsec_t fm_dtesc;
fm_mdio_t fm_mdio;
- } mac[4];
- u8 res3[32*1024];
- fm_10gec_t fm_10gec;
- fm_10gec_mdio_t fm_10gec_mdio;
+ } mac_1g[8]; /* support up to 8 1g controllers */
+ struct {
+ fm_10gec_t fm_10gec;
+ fm_10gec_mdio_t fm_10gec_mdio;
+ } mac_10g[1];
u8 res4[48*1024];
fm_1588_t fm_1588;
u8 res5[4*1024];
diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h
index d4d980905..7d95eb441 100644
--- a/arch/powerpc/include/asm/fsl_ifc.h
+++ b/arch/powerpc/include/asm/fsl_ifc.h
@@ -69,6 +69,7 @@
*/
/* Enable ECC Encoder */
#define CSOR_NAND_ECC_ENC_EN 0x80000000
+#define CSOR_NAND_ECC_MODE_MASK 0x30000000
/* 4 bit correction per 520 Byte sector */
#define CSOR_NAND_ECC_MODE_4 0x00000000
/* 8 bit correction per 528 Byte sector */
@@ -857,10 +858,7 @@ struct fsl_ifc_nand {
u32 res19[0x10];
u32 nand_fsr;
u32 res20;
- u32 nand_eccstat0;
- u32 nand_eccstat1;
- u32 nand_eccstat2;
- u32 nand_eccstat3;
+ u32 nand_eccstat[4];
u32 res21[0x20];
u32 nanndcr;
u32 res22[0x2];
@@ -953,5 +951,10 @@ struct fsl_ifc {
struct fsl_ifc_gpcm ifc_gpcm;
};
+#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A002769
+#undef CSPR_MSEL_NOR
+#define CSPR_MSEL_NOR CSPR_MSEL_GPCM
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_PPC_FSL_IFC_H */
diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h
index 801571f9e..9ad104eb8 100644
--- a/arch/powerpc/include/asm/fsl_liodn.h
+++ b/arch/powerpc/include/asm/fsl_liodn.h
@@ -147,9 +147,18 @@ extern void fdt_fixup_liodn(void *blob);
offsetof(ccsr_sec_t, decoliodnr[num].ls) + \
CONFIG_SYS_FSL_SEC_OFFSET, 0)
+#define SET_RAID_ENGINE_JQ_LIODN_ENTRY(jqNum, rNum, liodnA) \
+ SET_LIODN_ENTRY_1("fsl,raideng-v1.0-job-ring", \
+ liodnA, \
+ offsetof(struct ccsr_raide, jq[jqNum].ring[rNum].cfg1) + \
+ CONFIG_SYS_FSL_RAID_ENGINE_OFFSET, \
+ offsetof(struct ccsr_raide, jq[jqNum].ring[rNum].cfg0) + \
+ CONFIG_SYS_FSL_RAID_ENGINE_OFFSET)
+
extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[];
+extern struct liodn_id_table raide_liodn_tbl[];
extern struct liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[];
-extern int liodn_tbl_sz, sec_liodn_tbl_sz;
+extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz;
extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz;
#endif
diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h
index e1c1212c3..8c3ea0bac 100644
--- a/arch/powerpc/include/asm/fsl_portals.h
+++ b/arch/powerpc/include/asm/fsl_portals.h
@@ -35,6 +35,9 @@ enum fsl_dpaa_dev {
#ifdef CONFIG_SYS_DPAA_PME
FSL_HW_PORTAL_PME,
#endif
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+ FSL_HW_PORTAL_RAID_ENGINE,
+#endif
};
struct qportal_info {
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
new file mode 100644
index 000000000..d1c1967d1
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSL_SECURE_BOOT_H
+#define __FSL_SECURE_BOOT_H
+
+/* Starting TLB number for the TLB entried for 3.5 G space created by ISBC */
+#if defined(CONFIG_FSL_CORENET)
+#define CONFIG_SYS_ISBC_START_TLB 3
+#else
+#define CONFIG_SYS_ISBC_START_TLB 0
+#endif
+
+/* Number fo TLB's created by ISBC */
+#define CONFIG_SYS_ISBC_NUM_TLBS 5
+
+#if defined(CONFIG_FSL_CORENET)
+#define CONFIG_SYS_PBI_FLASH_BASE 0xc0000000
+#else
+#define CONFIG_SYS_PBI_FLASH_BASE 0xce000000
+#endif
+#define CONFIG_SYS_PBI_FLASH_WINDOW 0xcff80000
+
+#endif
diff --git a/arch/powerpc/include/asm/fsl_tgec.h b/arch/powerpc/include/asm/fsl_tgec.h
new file mode 100644
index 000000000..8de37c9e5
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_tgec.h
@@ -0,0 +1,215 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __TGEC_H__
+#define __TGEC_H__
+
+#include <phy.h>
+
+struct tgec {
+ /* 10GEC general control and status registers */
+ u32 tgec_id; /* Controller ID register */
+ u32 res0;
+ u32 command_config; /* Control and configuration register */
+ u32 mac_addr_0; /* Lower 32 bits of 48-bit MAC address */
+ u32 mac_addr_1; /* Upper 16 bits of 48-bit MAC address */
+ u32 maxfrm; /* Maximum frame length register */
+ u32 pause_quant; /* Pause quanta register */
+ u32 res1[4];
+ u32 hashtable_ctrl; /* Hash table control register */
+ u32 res2[4];
+ u32 status; /* MAC status register */
+ u32 tx_ipg_length; /* Transmitter inter-packet-gap register */
+ u32 mac_addr_2; /* Lower 32 bits of the 2nd 48-bit MAC addr */
+ u32 mac_addr_3; /* Upper 16 bits of the 2nd 48-bit MAC addr */
+ u32 res3[4];
+ u32 imask; /* Interrupt mask register */
+ u32 ievent; /* Interrupt event register */
+ u32 res4[6];
+ /* 10GEC statistics counter registers */
+ u32 tx_frame_u; /* Tx frame counter upper */
+ u32 tx_frame_l; /* Tx frame counter lower */
+ u32 rx_frame_u; /* Rx frame counter upper */
+ u32 rx_frame_l; /* Rx frame counter lower */
+ u32 rx_frame_crc_err_u; /* Rx frame check sequence error upper */
+ u32 rx_frame_crc_err_l; /* Rx frame check sequence error lower */
+ u32 rx_align_err_u; /* Rx alignment error upper */
+ u32 rx_align_err_l; /* Rx alignment error lower */
+ u32 tx_pause_frame_u; /* Tx valid pause frame upper */
+ u32 tx_pause_frame_l; /* Tx valid pause frame lower */
+ u32 rx_pause_frame_u; /* Rx valid pause frame upper */
+ u32 rx_pause_frame_l; /* Rx valid pause frame upper */
+ u32 rx_long_err_u; /* Rx too long frame error upper */
+ u32 rx_long_err_l; /* Rx too long frame error lower */
+ u32 rx_frame_err_u; /* Rx frame length error upper */
+ u32 rx_frame_err_l; /* Rx frame length error lower */
+ u32 tx_vlan_u; /* Tx VLAN frame upper */
+ u32 tx_vlan_l; /* Tx VLAN frame lower */
+ u32 rx_vlan_u; /* Rx VLAN frame upper */
+ u32 rx_vlan_l; /* Rx VLAN frame lower */
+ u32 tx_oct_u; /* Tx octets upper */
+ u32 tx_oct_l; /* Tx octets lower */
+ u32 rx_oct_u; /* Rx octets upper */
+ u32 rx_oct_l; /* Rx octets lower */
+ u32 rx_uni_u; /* Rx unicast frame upper */
+ u32 rx_uni_l; /* Rx unicast frame lower */
+ u32 rx_multi_u; /* Rx multicast frame upper */
+ u32 rx_multi_l; /* Rx multicast frame lower */
+ u32 rx_brd_u; /* Rx broadcast frame upper */
+ u32 rx_brd_l; /* Rx broadcast frame lower */
+ u32 tx_frame_err_u; /* Tx frame error upper */
+ u32 tx_frame_err_l; /* Tx frame error lower */
+ u32 tx_uni_u; /* Tx unicast frame upper */
+ u32 tx_uni_l; /* Tx unicast frame lower */
+ u32 tx_multi_u; /* Tx multicast frame upper */
+ u32 tx_multi_l; /* Tx multicast frame lower */
+ u32 tx_brd_u; /* Tx broadcast frame upper */
+ u32 tx_brd_l; /* Tx broadcast frame lower */
+ u32 rx_drop_u; /* Rx dropped packets upper */
+ u32 rx_drop_l; /* Rx dropped packets lower */
+ u32 rx_eoct_u; /* Rx ethernet octets upper */
+ u32 rx_eoct_l; /* Rx ethernet octets lower */
+ u32 rx_pkt_u; /* Rx packets upper */
+ u32 rx_pkt_l; /* Rx packets lower */
+ u32 tx_undsz_u; /* Undersized packet upper */
+ u32 tx_undsz_l; /* Undersized packet lower */
+ u32 rx_64_u; /* Rx 64 oct packet upper */
+ u32 rx_64_l; /* Rx 64 oct packet lower */
+ u32 rx_127_u; /* Rx 65 to 127 oct packet upper */
+ u32 rx_127_l; /* Rx 65 to 127 oct packet lower */
+ u32 rx_255_u; /* Rx 128 to 255 oct packet upper */
+ u32 rx_255_l; /* Rx 128 to 255 oct packet lower */
+ u32 rx_511_u; /* Rx 256 to 511 oct packet upper */
+ u32 rx_511_l; /* Rx 256 to 511 oct packet lower */
+ u32 rx_1023_u; /* Rx 512 to 1023 oct packet upper */
+ u32 rx_1023_l; /* Rx 512 to 1023 oct packet lower */
+ u32 rx_1518_u; /* Rx 1024 to 1518 oct packet upper */
+ u32 rx_1518_l; /* Rx 1024 to 1518 oct packet lower */
+ u32 rx_1519_u; /* Rx 1519 to max oct packet upper */
+ u32 rx_1519_l; /* Rx 1519 to max oct packet lower */
+ u32 tx_oversz_u; /* oversized packet upper */
+ u32 tx_oversz_l; /* oversized packet lower */
+ u32 tx_jabber_u; /* Jabber packet upper */
+ u32 tx_jabber_l; /* Jabber packet lower */
+ u32 tx_frag_u; /* Fragment packet upper */
+ u32 tx_frag_l; /* Fragment packet lower */
+ u32 rx_err_u; /* Rx frame error upper */
+ u32 rx_err_l; /* Rx frame error lower */
+ u32 res5[0x39a];
+};
+
+/* EC10G_ID - 10-gigabit ethernet MAC controller ID */
+#define EC10G_ID_VER_MASK 0x0000ff00
+#define EC10G_ID_VER_SHIFT 8
+#define EC10G_ID_REV_MASK 0x000000ff
+
+/* COMMAND_CONFIG - command and configuration register */
+#define TGEC_CMD_CFG_EN_TIMESTAMP 0x00100000 /* enable IEEE1588 */
+#define TGEC_CMD_CFG_TX_ADDR_INS_SEL 0x00080000 /* Tx mac addr w/ second */
+#define TGEC_CMD_CFG_NO_LEN_CHK 0x00020000 /* payload len chk disable */
+#define TGEC_CMD_CFG_SEND_IDLE 0x00010000 /* send XGMII idle seqs */
+#define TGEC_CMD_CFG_RX_ER_DISC 0x00004000 /* Rx err frm discard enb */
+#define TGEC_CMD_CFG_CMD_FRM_EN 0x00002000 /* CMD frame RX enable */
+#define TGEC_CMD_CFG_STAT_CLR 0x00001000 /* clear stats */
+#define TGEC_CMD_CFG_TX_ADDR_INS 0x00000200 /* overwrite src MAC addr */
+#define TGEC_CMD_CFG_PAUSE_IGNORE 0x00000100 /* ignore pause frames */
+#define TGEC_CMD_CFG_PAUSE_FWD 0x00000080 /* fwd pause frames */
+#define TGEC_CMD_CFG_CRC_FWD 0x00000040 /* fwd Rx CRC frames */
+#define TGEC_CMD_CFG_PAD_EN 0x00000020 /* MAC remove Rx padding */
+#define TGEC_CMD_CFG_PROM_EN 0x00000010 /* promiscuous mode enable */
+#define TGEC_CMD_CFG_WAN_MODE 0x00000008 /* WAN mode enable */
+#define TGEC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */
+#define TGEC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */
+#define TGEC_CMD_CFG_RXTX_EN (TGEC_CMD_CFG_RX_EN | TGEC_CMD_CFG_TX_EN)
+
+/* HASHTABLE_CTRL - Hashtable control register */
+#define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */
+#define HASHTABLE_CTRL_ADDR_MASK 0x000001ff
+
+/* TX_IPG_LENGTH - Transmit inter-packet gap length register */
+#define TX_IPG_LENGTH_IPG_LEN_MASK 0x000003ff
+
+/* IMASK - interrupt mask register */
+#define IMASK_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event mask */
+#define IMASK_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion mask */
+#define IMASK_REM_FAULT 0x00004000 /* remote fault mask */
+#define IMASK_LOC_FAULT 0x00002000 /* local fault mask */
+#define IMASK_TX_ECC_ER 0x00001000 /* Tx frame ECC error mask */
+#define IMASK_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow mask */
+#define IMASK_TX_ER 0x00000200 /* Tx frame error mask */
+#define IMASK_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow mask */
+#define IMASK_RX_ECC_ER 0x00000080 /* Rx frame ECC error mask */
+#define IMASK_RX_JAB_FRM 0x00000040 /* Rx jabber frame mask */
+#define IMASK_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame mask */
+#define IMASK_RX_RUNT_FRM 0x00000010 /* Rx runt frame mask */
+#define IMASK_RX_FRAG_FRM 0x00000008 /* Rx fragment frame mask */
+#define IMASK_RX_LEN_ER 0x00000004 /* Rx payload length error mask */
+#define IMASK_RX_CRC_ER 0x00000002 /* Rx CRC error mask */
+#define IMASK_RX_ALIGN_ER 0x00000001 /* Rx alignment error mask */
+
+#define IMASK_MASK_ALL 0x00000000
+
+/* IEVENT - interrupt event register */
+#define IEVENT_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event */
+#define IEVENT_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion */
+#define IEVENT_REM_FAULT 0x00004000 /* remote fault */
+#define IEVENT_LOC_FAULT 0x00002000 /* local fault */
+#define IEVENT_TX_ECC_ER 0x00001000 /* Tx frame ECC error */
+#define IEVENT_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow */
+#define IEVENT_TX_ER 0x00000200 /* Tx frame error */
+#define IEVENT_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow */
+#define IEVENT_RX_ECC_ER 0x00000080 /* Rx frame ECC error */
+#define IEVENT_RX_JAB_FRM 0x00000040 /* Rx jabber frame */
+#define IEVENT_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame */
+#define IEVENT_RX_RUNT_FRM 0x00000010 /* Rx runt frame */
+#define IEVENT_RX_FRAG_FRM 0x00000008 /* Rx fragment frame */
+#define IEVENT_RX_LEN_ER 0x00000004 /* Rx payload length error */
+#define IEVENT_RX_CRC_ER 0x00000002 /* Rx CRC error */
+#define IEVENT_RX_ALIGN_ER 0x00000001 /* Rx alignment error */
+
+#define IEVENT_CLEAR_ALL 0xffffffff
+
+struct tgec_mdio_controller {
+ u32 res0[0xc];
+ u32 mdio_stat; /* MDIO configuration and status */
+ u32 mdio_ctl; /* MDIO control */
+ u32 mdio_data; /* MDIO data */
+ u32 mdio_addr; /* MDIO address */
+};
+
+#define MDIO_STAT_CLKDIV(x) (((x>>1) & 0xff) << 8)
+#define MDIO_STAT_BSY (1 << 0)
+#define MDIO_STAT_RD_ER (1 << 1)
+#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f)
+#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5)
+#define MDIO_CTL_PRE_DIS (1 << 10)
+#define MDIO_CTL_SCAN_EN (1 << 11)
+#define MDIO_CTL_POST_INC (1 << 14)
+#define MDIO_CTL_READ (1 << 15)
+
+#define MDIO_DATA(x) (x & 0xffff)
+#define MDIO_DATA_BSY (1 << 31)
+
+struct fsl_enet_mac;
+
+void init_tgec(struct fsl_enet_mac *mac, void *base, void *phyregs,
+ int max_rx_len);
+
+#endif
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index cc0293acd..8d4c9cb4f 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2004-2009 Freescale Semiconductor, Inc.
+ * Copyright 2004-2011 Freescale Semiconductor, Inc.
*
* MPC83xx Internal Memory Map
*
@@ -285,6 +285,105 @@ typedef struct qesba83xx {
/*
* DDR Memory Controller Memory Map
*/
+#if defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3)
+typedef struct ccsr_ddr {
+ u32 cs0_bnds; /* Chip Select 0 Memory Bounds */
+ u8 res1[4];
+ u32 cs1_bnds; /* Chip Select 1 Memory Bounds */
+ u8 res2[4];
+ u32 cs2_bnds; /* Chip Select 2 Memory Bounds */
+ u8 res3[4];
+ u32 cs3_bnds; /* Chip Select 3 Memory Bounds */
+ u8 res4[100];
+ u32 cs0_config; /* Chip Select Configuration */
+ u32 cs1_config; /* Chip Select Configuration */
+ u32 cs2_config; /* Chip Select Configuration */
+ u32 cs3_config; /* Chip Select Configuration */
+ u8 res4a[48];
+ u32 cs0_config_2; /* Chip Select Configuration 2 */
+ u32 cs1_config_2; /* Chip Select Configuration 2 */
+ u32 cs2_config_2; /* Chip Select Configuration 2 */
+ u32 cs3_config_2; /* Chip Select Configuration 2 */
+ u8 res5[48];
+ u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */
+ u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */
+ u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */
+ u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */
+ u32 sdram_cfg; /* SDRAM Control Configuration */
+ u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */
+ u32 sdram_mode; /* SDRAM Mode Configuration */
+ u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */
+ u32 sdram_md_cntl; /* SDRAM Mode Control */
+ u32 sdram_interval; /* SDRAM Interval Configuration */
+ u32 sdram_data_init; /* SDRAM Data initialization */
+ u8 res6[4];
+ u32 sdram_clk_cntl; /* SDRAM Clock Control */
+ u8 res7[20];
+ u32 init_addr; /* training init addr */
+ u32 init_ext_addr; /* training init extended addr */
+ u8 res8_1[16];
+ u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */
+ u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */
+ u8 reg8_1a[8];
+ u32 ddr_zq_cntl; /* ZQ calibration control*/
+ u32 ddr_wrlvl_cntl; /* write leveling control*/
+ u8 reg8_1aa[4];
+ u32 ddr_sr_cntr; /* self refresh counter */
+ u32 ddr_sdram_rcw_1; /* Control Words 1 */
+ u32 ddr_sdram_rcw_2; /* Control Words 2 */
+ u8 reg_1ab[8];
+ u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */
+ u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */
+ u8 res8_1b[104];
+ u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */
+ u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */
+ u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */
+ u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */
+ u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */
+ u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */
+ u8 res8_1ba[0x908];
+ u32 ddr_dsr1; /* Debug Status 1 */
+ u32 ddr_dsr2; /* Debug Status 2 */
+ u32 ddr_cdr1; /* Control Driver 1 */
+ u32 ddr_cdr2; /* Control Driver 2 */
+ u8 res8_1c[200];
+ u32 ip_rev1; /* IP Block Revision 1 */
+ u32 ip_rev2; /* IP Block Revision 2 */
+ u32 eor; /* Enhanced Optimization Register */
+ u8 res8_2[252];
+ u32 mtcr; /* Memory Test Control Register */
+ u8 res8_3[28];
+ u32 mtp1; /* Memory Test Pattern 1 */
+ u32 mtp2; /* Memory Test Pattern 2 */
+ u32 mtp3; /* Memory Test Pattern 3 */
+ u32 mtp4; /* Memory Test Pattern 4 */
+ u32 mtp5; /* Memory Test Pattern 5 */
+ u32 mtp6; /* Memory Test Pattern 6 */
+ u32 mtp7; /* Memory Test Pattern 7 */
+ u32 mtp8; /* Memory Test Pattern 8 */
+ u32 mtp9; /* Memory Test Pattern 9 */
+ u32 mtp10; /* Memory Test Pattern 10 */
+ u8 res8_4[184];
+ u32 data_err_inject_hi; /* Data Path Err Injection Mask High */
+ u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */
+ u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */
+ u8 res9[20];
+ u32 capture_data_hi; /* Data Path Read Capture High */
+ u32 capture_data_lo; /* Data Path Read Capture Low */
+ u32 capture_ecc; /* Data Path Read Capture ECC */
+ u8 res10[20];
+ u32 err_detect; /* Error Detect */
+ u32 err_disable; /* Error Disable */
+ u32 err_int_en;
+ u32 capture_attributes; /* Error Attrs Capture */
+ u32 capture_address; /* Error Addr Capture */
+ u32 capture_ext_address; /* Error Extended Addr Capture */
+ u32 err_sbe; /* Single-Bit ECC Error Management */
+ u8 res11[164];
+ u32 debug[32]; /* debug_1 to debug_32 */
+ u8 res12[128];
+} ccsr_ddr_t;
+#else
typedef struct ddr_cs_bnds {
u32 csbnds;
u8 res0[4];
@@ -334,6 +433,7 @@ typedef struct ddr83xx {
u32 debug_reg;
u8 res9[0xFC];
} ddr83xx_t;
+#endif
/*
* DUART
@@ -641,7 +741,11 @@ typedef struct immap {
u8 dll_ddr[0x100];
u8 dll_lbc[0x100];
u8 res1[0xE00];
- ddr83xx_t ddr; /* DDR Memory Controller Memory */
+#if defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3)
+ ccsr_ddr_t ddr; /* DDR Memory Controller Memory */
+#else
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+#endif
fsl_i2c_t i2c[2]; /* I2C Controllers */
u8 res2[0x1300];
duart83xx_t duart[2]; /* DUART */
@@ -869,10 +973,15 @@ typedef struct immap {
} immap_t;
#endif
+#define CONFIG_SYS_MPC83xx_DDR_OFFSET (0x2000)
+#define CONFIG_SYS_MPC83xx_DDR_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DDR_OFFSET)
#define CONFIG_SYS_MPC83xx_DMA_OFFSET (0x8000)
-#define CONFIG_SYS_MPC83xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET)
+#define CONFIG_SYS_MPC83xx_DMA_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET)
#define CONFIG_SYS_MPC83xx_ESDHC_OFFSET (0x2e000)
-#define CONFIG_SYS_MPC83xx_ESDHC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET)
+#define CONFIG_SYS_MPC83xx_ESDHC_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET)
#ifndef CONFIG_SYS_MPC83xx_USB_OFFSET
#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 6aaade076..fb5ef916c 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1700,12 +1700,34 @@ typedef struct ccsr_gur {
#define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000
#define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000
#define FSL_CORENET_RCWSR11_EC1 0x00c00000 /* bits 360..361 */
-#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1 0x00000000
-#define FSL_CORENET_RCWSR11_EC1_FM1_USB1 0x00800000
+#if defined(CONFIG_PPC_P4080) || defined(CONFIG_PPC_P3060)
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1 0x00000000
+#define FSL_CORENET_RCWSR11_EC1_FM1_USB1 0x00800000
#define FSL_CORENET_RCWSR11_EC2 0x001c0000 /* bits 363..365 */
-#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1 0x00000000
-#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2 0x00080000
-#define FSL_CORENET_RCWSR11_EC2_USB2 0x00100000
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1 0x00000000
+#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2 0x00080000
+#define FSL_CORENET_RCWSR11_EC2_USB2 0x00100000
+#endif
+#if defined(CONFIG_PPC_P3060)
+#define FSL_CORENET_RCWSR13_EC1_EXT 0x1c000000
+#define FSL_CORENET_RCWSR13_EC1_EXT_FM1_DTSEC4_RGMII 0x04000000
+#define FSL_CORENET_RCWSR13_EC1_EXT_FM1_DTSEC4_MII 0x08000000
+#define FSL_CORENET_RCWSR13_EC2_EXT 0x01c00000
+#define FSL_CORENET_RCWSR13_EC2_EXT_FM2_DTSEC4_RGMII 0x00400000
+#define FSL_CORENET_RCWSR13_EC2_EXT_FM2_DTSEC4_MII 0x00800000
+#define FSL_CORENET_RCWSR13_EC3 0x00380000
+#define FSL_CORENET_RCWSR13_EC3_FM2_DTSEC4_MII 0x00100000
+#endif
+#if defined(CONFIG_PPC_P2040) || defined(CONFIG_PPC_P2041) \
+ || defined(CONFIG_PPC_P3041) || defined(CONFIG_PPC_P5020)
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_RGMII 0x00000000
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_MII 0x00800000
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_NONE 0x00c00000
+#define FSL_CORENET_RCWSR11_EC2 0x00180000 /* bits 363..364 */
+#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII 0x00100000
+#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE 0x00180000
+#endif
u8 res18[192];
u32 scratchrw[4]; /* Scratch Read/Write */
u8 res19[240];
@@ -1873,6 +1895,7 @@ typedef struct ccsr_gur {
#if defined(CONFIG_P1017) || defined(CONFIG_P1023)
#define MPC85xx_PORDEVSR_SGMII1_DIS 0x10000000
#define MPC85xx_PORDEVSR_SGMII2_DIS 0x08000000
+#define MPC85xx_PORDEVSR_TSEC1_PRTC 0x02000000
#else
#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
#define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000
@@ -1971,6 +1994,9 @@ typedef struct ccsr_gur {
#define MPC85xx_PMUXCR_CAN2_TDM 0x00000002
#define MPC85xx_PMUXCR_CAN2_RES 0x00000003
#endif
+#if defined(CONFIG_P1017) || defined(CONFIG_P1023)
+#define MPC85xx_PMUXCR_TSEC1_1 0x10000000
+#else
#define MPC85xx_PMUXCR_SD_DATA 0x80000000
#define MPC85xx_PMUXCR_SDHC_CD 0x40000000
#define MPC85xx_PMUXCR_SDHC_WP 0x20000000
@@ -1989,6 +2015,7 @@ typedef struct ccsr_gur {
#define MPC85xx_PMUXCR_QE10 0x00000020
#define MPC85xx_PMUXCR_QE11 0x00000010
#define MPC85xx_PMUXCR_QE12 0x00000008
+#endif
#if defined(CONFIG_P1013) || defined(CONFIG_P1022)
#define MPC85xx_PMUXCR_TDM_MASK 0x0001cc00
#define MPC85xx_PMUXCR_TDM 0x00014800
@@ -2301,6 +2328,22 @@ typedef struct ccsr_usb_phy {
} ccsr_usb_phy_t;
#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+struct ccsr_raide {
+ u8 res0[0x543];
+ u32 liodnbr; /* LIODN Base Register */
+ u8 res1[0xab8];
+ struct {
+ struct {
+ u32 cfg0; /* cfg register 0 */
+ u32 cfg1; /* cfg register 1 */
+ u8 res1[0x3f8];
+ } ring[2];
+ u8 res[0x800];
+ } jq[2];
+};
+#endif
+
#ifdef CONFIG_FSL_CORENET
#define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000
#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000
@@ -2331,6 +2374,7 @@ typedef struct ccsr_usb_phy {
#define CONFIG_SYS_FSL_CORENET_PME_OFFSET 0x316000
#define CONFIG_SYS_FSL_QMAN_OFFSET 0x318000
#define CONFIG_SYS_FSL_BMAN_OFFSET 0x31a000
+#define CONFIG_SYS_FSL_RAID_ENGINE_OFFSET 0x320000
#define CONFIG_SYS_FSL_FM1_OFFSET 0x400000
#define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET 0x488000
#define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET 0x489000
@@ -2379,6 +2423,8 @@ typedef struct ccsr_usb_phy {
#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000
#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100
#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000
+#define CONFIG_SYS_SNVS_OFFSET 0xE6000
+#define CONFIG_SYS_SFP_OFFSET 0xE7000
#define CONFIG_SYS_MPC85xx_CPM_OFFSET 0x80000
#define CONFIG_SYS_FSL_QMAN_OFFSET 0x88000
#define CONFIG_SYS_FSL_BMAN_OFFSET 0x8a000
@@ -2399,6 +2445,8 @@ typedef struct ccsr_usb_phy {
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_BMAN_OFFSET)
#define CONFIG_SYS_FSL_CORENET_PME_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_PME_OFFSET)
+#define CONFIG_SYS_FSL_RAID_ENGINE_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_RAID_ENGINE_OFFSET)
#define CONFIG_SYS_MPC85xx_GUTS_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET)
#define CONFIG_SYS_FSL_CORENET_CCM_ADDR \
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 0c4cc2554..1b96b84dc 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1022,7 +1022,11 @@
#define SVR_FAM(svr) (((svr) >> 20) & 0xFFF) /* Family field */
#define SVR_MEM(svr) (((svr) >> 16) & 0xF) /* Member field */
+#ifdef CONFIG_MPC8536
+#define SVR_MAJ(svr) (((svr) >> 4) & 0x7) /* Major revision field*/
+#else
#define SVR_MAJ(svr) (((svr) >> 4) & 0xF) /* Major revision field*/
+#endif
#define SVR_MIN(svr) (((svr) >> 0) & 0xF) /* Minor revision field*/
/* Some parts define SVR[0:23] as the SOC version */
@@ -1111,6 +1115,8 @@
#define SVR_P2041_E 0x821801
#define SVR_P3041 0x821103
#define SVR_P3041_E 0x821903
+#define SVR_P3060 0x820002
+#define SVR_P3060_E 0x820802
#define SVR_P4040 0x820100
#define SVR_P4040_E 0x820900
#define SVR_P4080 0x820000
@@ -1176,13 +1182,17 @@ struct cpu_type {
char name[15];
u32 soc_ver;
u32 num_cores;
+ u32 mask; /* which cpu(s) actually exist */
};
struct cpu_type *identify_cpu(u32 ver);
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
#define CPU_TYPE_ENTRY(n, v, nc) \
- { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), }
+ { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), \
+ .mask = (1 << (nc)) - 1 }
+#define CPU_TYPE_ENTRY_MASK(n, v, nc, m) \
+ { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), .mask = (m) }
#else
#if defined(CONFIG_MPC83xx)
#define CPU_TYPE_ENTRY(x) {#x, SPR_##x}
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index c47d10d2e..b27f054df 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -31,6 +31,7 @@ LIB = $(obj)libfreescale.o
COBJS-$(CONFIG_FSL_CADMUS) += cadmus.o
COBJS-$(CONFIG_FSL_VIA) += cds_via.o
+COBJS-$(CONFIG_FMAN_ENET) += fman.o
COBJS-$(CONFIG_FSL_PIXIS) += pixis.o
COBJS-$(CONFIG_FSL_NGPIXIS) += ngpixis.o
COBJS-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
@@ -52,12 +53,22 @@ COBJS-$(CONFIG_P3041DS) += ics307_clk.o
COBJS-$(CONFIG_P4080DS) += ics307_clk.o
COBJS-$(CONFIG_P5020DS) += ics307_clk.o
+# deal with common files for P-series corenet based devices
+SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o
+SUBLIB-$(CONFIG_P3041DS) += p_corenet/libp_corenet.o
+SUBLIB-$(CONFIG_P4080DS) += p_corenet/libp_corenet.o
+SUBLIB-$(CONFIG_P5020DS) += p_corenet/libp_corenet.o
+
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))
+SUBLIB := $(addprefix $(obj),$(SUBLIB-y))
+
+$(LIB): $(obj).depend $(OBJS) $(SUBLIB)
+ $(call cmd_link_o_target, $(OBJS) $(SUBLIB))
-$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
+$(SUBLIB): $(obj).depend
+ $(MAKE) -C $(dir $(subst $(obj),,$@))
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/freescale/common/cadmus.c b/board/freescale/common/cadmus.c
index db54bc4d5..50b6e9f2a 100644
--- a/board/freescale/common/cadmus.c
+++ b/board/freescale/common/cadmus.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2011 Freescale Semiconductor.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -61,12 +61,12 @@ get_clock_freq(void)
uint pci1_speed = (cadmus->cm_pci >> 2) & 0x3; /* PSPEED in [4:5] */
if (pci1_speed == 0) {
- return 33000000;
+ return 33333333;
} else if (pci1_speed == 1) {
- return 66000000;
+ return 66666666;
} else {
/* Really, unknown. Be safe? */
- return 33000000;
+ return 33333333;
}
}
diff --git a/board/freescale/common/fman.c b/board/freescale/common/fman.c
new file mode 100644
index 000000000..8a55fde6f
--- /dev/null
+++ b/board/freescale/common/fman.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+
+/*
+ * Given the following ...
+ *
+ * 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
+ * compatible string and 'addr' physical address)
+ *
+ * 2) The name of an alias that points to the ethernet-phy node (usually inside
+ * a virtual MDIO node)
+ *
+ * ... update that Ethernet node's phy-handle property to point to the
+ * ethernet-phy node. This is how we link an Ethernet node to its PHY, so each
+ * PHY in a virtual MDIO node must have an alias.
+ */
+void fdt_set_phy_handle(void *fdt, char *compat, phys_addr_t addr,
+ const char *alias)
+{
+ int offset, ph;
+ const char *path;
+
+ /* Get a path to the node that 'alias' points to */
+ path = fdt_get_alias(fdt, alias);
+ if (path) {
+ /* Get the offset of that node */
+ int off = fdt_path_offset(fdt, path);
+ if (off > 0)
+ ph = fdt_create_phandle(fdt, off);
+ else
+ return;
+ } else {
+ return ;
+ }
+
+ /* failed to create a phandle */
+ if (ph <= 0)
+ return ;
+
+ offset = fdt_node_offset_by_compat_reg(fdt, compat, addr);
+ if (offset > 0)
+ fdt_setprop(fdt, offset, "phy-handle", &ph, sizeof(ph));
+}
diff --git a/board/freescale/p2041rdb/pci.c b/board/freescale/common/fman.h
index 1ab4cdf5f..19ef7c4fb 100644
--- a/board/freescale/p2041rdb/pci.c
+++ b/board/freescale/common/fman.h
@@ -1,9 +1,6 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -20,20 +17,10 @@
* MA 02111-1307 USA
*/
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
+#ifndef __FMAN_BOARD_HELPER__
+#define __FMAN_BOARD_HELPER__
-void pci_init_board(void)
-{
- fsl_pcie_init_board(0);
-}
+void fdt_set_phy_handle(void *fdt, char *compat, phys_addr_t addr,
+ const char *alias);
-void pci_of_setup(void *blob, bd_t *bd)
-{
- FT_FSL_PCI_SETUP;
-}
+#endif
diff --git a/board/freescale/common/p_corenet/Makefile b/board/freescale/common/p_corenet/Makefile
new file mode 100644
index 000000000..a76f590c3
--- /dev/null
+++ b/board/freescale/common/p_corenet/Makefile
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(TOPDIR)/config.mk
+
+LIB = libp_corenet.o
+
+COBJS-y += law.o
+COBJS-$(CONFIG_PCI) += pci.o
+COBJS-y += tlb.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/board/freescale/corenet_ds/law.c b/board/freescale/common/p_corenet/law.c
index 58f23c5a2..09ef5615d 100644
--- a/board/freescale/corenet_ds/law.c
+++ b/board/freescale/common/p_corenet/law.c
@@ -35,7 +35,12 @@ struct law_entry law_table[] = {
#ifdef CONFIG_SYS_QMAN_MEM_PHYS
SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_QMAN),
#endif
+#ifdef PIXIS_BASE_PHYS
SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+#endif
+#ifdef CPLD_BASE_PHYS
+ SET_LAW(CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+#endif
#ifdef CONFIG_SYS_DCSRBAR_PHYS
/* Limit DCSR to 32M to access NPC Trace Buffer */
SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
diff --git a/board/freescale/corenet_ds/pci.c b/board/freescale/common/p_corenet/pci.c
index 18a75de8c..18a75de8c 100644
--- a/board/freescale/corenet_ds/pci.c
+++ b/board/freescale/common/p_corenet/pci.c
diff --git a/board/freescale/corenet_ds/tlb.c b/board/freescale/common/p_corenet/tlb.c
index 2ce70044e..6a0026a2c 100644
--- a/board/freescale/corenet_ds/tlb.c
+++ b/board/freescale/common/p_corenet/tlb.c
@@ -30,24 +30,31 @@ struct fsl_e_tlb_entry tlb_table[] = {
/* TLB 0 - for temp stack in cache */
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
CONFIG_SYS_INIT_RAM_ADDR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
+#ifdef CPLD_BASE
+ SET_TLB_ENTRY(0, CPLD_BASE, CPLD_BASE_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+#endif
+#ifdef PIXIS_BASE
SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 0),
+#endif
/* TLB 1 */
/* *I*** - Covers boot page */
@@ -67,7 +74,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
/* *I*G* - CCSRBAR */
SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 1, BOOKE_PAGESZ_16M, 1),
/* *I*G* - Flash, localbus */
@@ -78,47 +85,47 @@ struct fsl_e_tlb_entry tlb_table[] = {
/* *I*G* - PCI */
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 3, BOOKE_PAGESZ_1G, 1),
/* *I*G* - PCI */
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000,
CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_256M, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000,
CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 5, BOOKE_PAGESZ_256M, 1),
/* *I*G* - PCI I/O */
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 6, BOOKE_PAGESZ_256K, 1),
/* Bman/Qman */
#ifdef CONFIG_SYS_BMAN_MEM_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ MAS3_SW|MAS3_SR, 0,
0, 9, BOOKE_PAGESZ_1M, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000,
CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_1M, 1),
#endif
#ifdef CONFIG_SYS_QMAN_MEM_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ MAS3_SW|MAS3_SR, 0,
0, 11, BOOKE_PAGESZ_1M, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000,
CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 12, BOOKE_PAGESZ_1M, 1),
#endif
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 13, BOOKE_PAGESZ_4M, 1),
#endif
#ifdef CONFIG_SYS_NAND_BASE
diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile
index 69e81a4d3..7e3300741 100644
--- a/board/freescale/corenet_ds/Makefile
+++ b/board/freescale/corenet_ds/Makefile
@@ -28,12 +28,12 @@ LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
+COBJS-$(CONFIG_P3041DS) += eth_hydra.o
+COBJS-$(CONFIG_P4080DS) += eth_p4080.o
+COBJS-$(CONFIG_P5020DS) += eth_hydra.o
COBJS-$(CONFIG_P3041DS) += p3041ds_ddr.o
COBJS-$(CONFIG_P4080DS) += p4080ds_ddr.o
COBJS-$(CONFIG_P5020DS) += p5020ds_ddr.o
-COBJS-$(CONFIG_PCI) += pci.o
-COBJS-y += law.o
-COBJS-y += tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index b1e782318..b1eecc495 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -32,10 +32,10 @@
#include <asm/fsl_serdes.h>
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
-
-extern void pci_of_setup(void *blob, bd_t *bd);
+#include <fm_eth.h>
#include "../common/ngpixis.h"
+#include "corenet_ds.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -237,9 +237,9 @@ void ft_board_setup(void *blob, bd_t *bd)
fdt_fixup_liodn(blob);
fdt_fixup_dr_usb(blob, bd);
-}
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_ethernet(blob);
+ fdt_fixup_board_enet(blob);
+#endif
}
diff --git a/board/freescale/corenet_ds/corenet_ds.h b/board/freescale/corenet_ds/corenet_ds.h
new file mode 100644
index 000000000..9cdd47d1c
--- /dev/null
+++ b/board/freescale/corenet_ds/corenet_ds.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CORENET_DS_H__
+#define __CORENET_DS_H__
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+
+#endif
diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c
index b93701571..3b4dfa3f8 100644
--- a/board/freescale/corenet_ds/ddr.c
+++ b/board/freescale/corenet_ds/ddr.c
@@ -118,53 +118,111 @@ typedef struct {
u32 force_2T;
} board_specific_parameters_t;
-/* ranges for parameters:
- * wr_data_delay = 0-6
- * clk adjust = 0-8
- * cpo 2-0x1E (30)
- */
-
-
-/* XXX: these values need to be checked for all interleaving modes. */
-/* XXX: No reliable dual-rank 800 MHz setting has been found. It may
- * seem reliable, but errors will appear when memory intensive
- * program is run. */
-/* XXX: Single rank at 800 MHz is OK. */
-const board_specific_parameters_t board_specific_parameters[][30] = {
+const board_specific_parameters_t board_specific_parameters_udimm[][30] = {
{
/*
* memory controller 0
* lo| hi| num| clk| wrlvl | cpo |wrdata|2T
- * mhz| mhz|ranks|adjst| start | delay|
+ * mhz| mhz|ranks|adjst| start | |delay |
*/
{ 0, 850, 4, 4, 6, 0xff, 2, 0},
{851, 950, 4, 5, 7, 0xff, 2, 0},
{951, 1050, 4, 5, 8, 0xff, 2, 0},
{1051, 1250, 4, 5, 10, 0xff, 2, 0},
{1251, 1350, 4, 5, 11, 0xff, 2, 0},
+ {1351, 1666, 4, 5, 12, 0xff, 2, 0},
{ 0, 850, 2, 5, 6, 0xff, 2, 0},
{851, 950, 2, 5, 7, 0xff, 2, 0},
{951, 1050, 2, 5, 7, 0xff, 2, 0},
{1051, 1250, 2, 4, 6, 0xff, 2, 0},
{1251, 1350, 2, 5, 7, 0xff, 2, 0},
+ {1351, 1666, 2, 5, 8, 0xff, 2, 0},
+ { 0, 850, 1, 4, 5, 0xff, 2, 0},
+ {851, 950, 1, 4, 7, 0xff, 2, 0},
+ {951, 1050, 1, 4, 8, 0xff, 2, 0},
+ {1051, 1250, 1, 4, 8, 0xff, 2, 0},
+ {1251, 1350, 1, 4, 8, 0xff, 2, 0},
+ {1351, 1666, 1, 4, 8, 0xff, 2, 0},
},
{
/*
* memory controller 1
* lo| hi| num| clk| wrlvl | cpo |wrdata|2T
- * mhz| mhz|ranks|adjst| start | delay|
+ * mhz| mhz|ranks|adjst| start | |delay |
*/
{ 0, 850, 4, 4, 6, 0xff, 2, 0},
{851, 950, 4, 5, 7, 0xff, 2, 0},
{951, 1050, 4, 5, 8, 0xff, 2, 0},
{1051, 1250, 4, 5, 10, 0xff, 2, 0},
{1251, 1350, 4, 5, 11, 0xff, 2, 0},
+ {1351, 1666, 4, 5, 12, 0xff, 2, 0},
{ 0, 850, 2, 5, 6, 0xff, 2, 0},
{851, 950, 2, 5, 7, 0xff, 2, 0},
{951, 1050, 2, 5, 7, 0xff, 2, 0},
{1051, 1250, 2, 4, 6, 0xff, 2, 0},
{1251, 1350, 2, 5, 7, 0xff, 2, 0},
+ {1351, 1666, 2, 5, 8, 0xff, 2, 0},
+ { 0, 850, 1, 4, 5, 0xff, 2, 0},
+ {851, 950, 1, 4, 7, 0xff, 2, 0},
+ {951, 1050, 1, 4, 8, 0xff, 2, 0},
+ {1051, 1250, 1, 4, 8, 0xff, 2, 0},
+ {1251, 1350, 1, 4, 8, 0xff, 2, 0},
+ {1351, 1666, 1, 4, 8, 0xff, 2, 0},
+ }
+};
+
+const board_specific_parameters_t board_specific_parameters_rdimm[][30] = {
+ {
+ /*
+ * memory controller 0
+ * lo| hi| num| clk| wrlvl | cpo |wrdata|2T
+ * mhz| mhz|ranks|adjst| start | |delay |
+ */
+ { 0, 850, 4, 4, 6, 0xff, 2, 0},
+ {851, 950, 4, 5, 7, 0xff, 2, 0},
+ {951, 1050, 4, 5, 8, 0xff, 2, 0},
+ {1051, 1250, 4, 5, 10, 0xff, 2, 0},
+ {1251, 1350, 4, 5, 11, 0xff, 2, 0},
+ {1351, 1666, 4, 5, 12, 0xff, 2, 0},
+ { 0, 850, 2, 4, 6, 0xff, 2, 0},
+ {851, 950, 2, 4, 7, 0xff, 2, 0},
+ {951, 1050, 2, 4, 7, 0xff, 2, 0},
+ {1051, 1250, 2, 4, 8, 0xff, 2, 0},
+ {1251, 1350, 2, 4, 8, 0xff, 2, 0},
+ {1351, 1666, 2, 4, 8, 0xff, 2, 0},
+ { 0, 850, 1, 4, 5, 0xff, 2, 0},
+ {851, 950, 1, 4, 7, 0xff, 2, 0},
+ {951, 1050, 1, 4, 8, 0xff, 2, 0},
+ {1051, 1250, 1, 4, 8, 0xff, 2, 0},
+ {1251, 1350, 1, 4, 8, 0xff, 2, 0},
+ {1351, 1666, 1, 4, 8, 0xff, 2, 0},
+ },
+
+ {
+ /*
+ * memory controller 1
+ * lo| hi| num| clk| wrlvl | cpo |wrdata|2T
+ * mhz| mhz|ranks|adjst| start | |delay |
+ */
+ { 0, 850, 4, 4, 6, 0xff, 2, 0},
+ {851, 950, 4, 5, 7, 0xff, 2, 0},
+ {951, 1050, 4, 5, 8, 0xff, 2, 0},
+ {1051, 1250, 4, 5, 10, 0xff, 2, 0},
+ {1251, 1350, 4, 5, 11, 0xff, 2, 0},
+ {1351, 1666, 4, 5, 12, 0xff, 2, 0},
+ { 0, 850, 2, 4, 6, 0xff, 2, 0},
+ {851, 950, 2, 4, 7, 0xff, 2, 0},
+ {951, 1050, 2, 4, 7, 0xff, 2, 0},
+ {1051, 1250, 2, 4, 8, 0xff, 2, 0},
+ {1251, 1350, 2, 4, 8, 0xff, 2, 0},
+ {1351, 1666, 2, 4, 8, 0xff, 2, 0},
+ { 0, 850, 1, 4, 5, 0xff, 2, 0},
+ {851, 950, 1, 4, 7, 0xff, 2, 0},
+ {951, 1050, 1, 4, 8, 0xff, 2, 0},
+ {1051, 1250, 1, 4, 8, 0xff, 2, 0},
+ {1251, 1350, 1, 4, 8, 0xff, 2, 0},
+ {1351, 1666, 1, 4, 8, 0xff, 2, 0},
}
};
@@ -172,13 +230,20 @@ void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
- const board_specific_parameters_t *pbsp =
- &(board_specific_parameters[ctrl_num][0]);
- u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
- sizeof(board_specific_parameters[0][0]);
+ const board_specific_parameters_t *pbsp;
+ u32 num_params;
u32 i;
ulong ddr_freq;
+ if (popts->registered_dimm_en) {
+ pbsp = &(board_specific_parameters_rdimm[ctrl_num][0]);
+ num_params = sizeof(board_specific_parameters_rdimm[ctrl_num]) /
+ sizeof(board_specific_parameters_rdimm[0][0]);
+ } else {
+ pbsp = &(board_specific_parameters_udimm[ctrl_num][0]);
+ num_params = sizeof(board_specific_parameters_udimm[ctrl_num]) /
+ sizeof(board_specific_parameters_udimm[0][0]);
+ }
/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
* freqency and n_banks specified in board_specific_parameters table.
*/
@@ -223,20 +288,6 @@ void fsl_ddr_board_options(memctl_options_t *popts,
/* DHC_EN =1, ODT = 60 Ohm */
popts->ddr_cdr1 = DDR_CDR1_DHC_EN;
-
- /* override SPD values. rcw_2 should vary at differnt speed */
- if (pdimm[0].registered_dimm == 1) {
- popts->rcw_override = 1;
- popts->rcw_1 = 0x000a5a00;
- if (ddr_freq <= 800)
- popts->rcw_2 = 0x00000000;
- else if (ddr_freq <= 1066)
- popts->rcw_2 = 0x00100000;
- else if (ddr_freq <= 1333)
- popts->rcw_2 = 0x00200000;
- else
- popts->rcw_2 = 0x00300000;
- }
}
phys_size_t initdram(int board_type)
diff --git a/board/freescale/corenet_ds/eth_hydra.c b/board/freescale/corenet_ds/eth_hydra.c
new file mode 100644
index 000000000..91b340826
--- /dev/null
+++ b/board/freescale/corenet_ds/eth_hydra.c
@@ -0,0 +1,553 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the board muxing between the Fman Ethernet MACs and
+ * the RGMII/SGMII/XGMII PHYs on a Freescale P3041/P5020 "Hydra" reference
+ * board. The RGMII PHYs are the two on-board 1Gb ports. The SGMII PHYs are
+ * provided by the standard Freescale four-port SGMII riser card. The 10Gb
+ * XGMII PHY is provided via the XAUI riser card. Since there is only one
+ * Fman device on a P3041 and P5020, we only support one SGMII card and one
+ * RGMII card.
+ *
+ * Muxing is handled via the PIXIS BRDCFG1 register. The EMI1 bits control
+ * muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII is
+ * always the same (0). The value for SGMII depends on which slot the riser is
+ * inserted in. The EMI2 bits control muxing for the the XGMII. Like SGMII,
+ * the value is based on which slot the XAUI is inserted in.
+ *
+ * The SERDES configuration is used to determine where the SGMII and XAUI cards
+ * exist, and also which Fman MACs are routed to which PHYs. So for a given
+ * Fman MAC, there is one and only PHY it connects to. MACs cannot be routed
+ * to PHYs dynamically.
+ *
+ *
+ * This file also updates the device tree in three ways:
+ *
+ * 1) The status of each virtual MDIO node that is referenced by an Ethernet
+ * node is set to "okay".
+ *
+ * 2) The phy-handle property of each active Ethernet MAC node is set to the
+ * appropriate PHY node.
+ *
+ * 3) The "mux value" for each virtual MDIO node is set to the correct value,
+ * if necessary. Some virtual MDIO nodes do not have configurable mux
+ * values, so those values are hard-coded in the DTS. On the HYDRA board,
+ * the virtual MDIO node for the SGMII card needs to be updated.
+ *
+ * For all this to work, the device tree needs to have the following:
+ *
+ * 1) An alias for each PHY node that an Ethernet node could be routed to.
+ *
+ * 2) An alias for each real and virtual MDIO node that is disabled by default
+ * and might need to be enabled, and also might need to have its mux-value
+ * updated.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/fsl_serdes.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <asm/fsl_dtsec.h>
+
+#include "../common/ngpixis.h"
+#include "../common/fman.h"
+
+#ifdef CONFIG_FMAN_ENET
+
+#define BRDCFG1_EMI1_SEL_MASK 0x70
+#define BRDCFG1_EMI1_SEL_SLOT1 0x10
+#define BRDCFG1_EMI1_SEL_SLOT2 0x20
+#define BRDCFG1_EMI1_SEL_SLOT5 0x30
+#define BRDCFG1_EMI1_SEL_SLOT6 0x40
+#define BRDCFG1_EMI1_SEL_SLOT7 0x50
+#define BRDCFG1_EMI1_SEL_RGMII 0x00
+#define BRDCFG1_EMI1_EN 0x08
+#define BRDCFG1_EMI2_SEL_MASK 0x06
+#define BRDCFG1_EMI2_SEL_SLOT1 0x00
+#define BRDCFG1_EMI2_SEL_SLOT2 0x02
+
+#define BRDCFG2_REG_GPIO_SEL 0x20
+
+/*
+ * BRDCFG1 mask and value for each MAC
+ *
+ * This array contains the BRDCFG1 values (in mask/val format) that route the
+ * MDIO bus to a particular RGMII or SGMII PHY.
+ */
+struct {
+ u8 mask;
+ u8 val;
+} mdio_mux[NUM_FM_PORTS];
+
+/*
+ * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
+ * that the mapping must be determined dynamically, or that the lane maps to
+ * something other than a board slot
+ */
+static u8 lane_to_slot[] = {
+ 7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0
+};
+
+/*
+ * Set the board muxing for a given MAC
+ *
+ * The MDIO layer calls this function every time it wants to talk to a PHY.
+ */
+void hydra_mux_mdio(u8 mask, u8 val)
+{
+ clrsetbits_8(&pixis->brdcfg1, mask, val);
+}
+
+struct hydra_mdio {
+ u8 mask;
+ u8 val;
+ struct mii_dev *realbus;
+};
+
+static int hydra_mdio_read(struct mii_dev *bus, int addr, int devad,
+ int regnum)
+{
+ struct hydra_mdio *priv = bus->priv;
+
+ hydra_mux_mdio(priv->mask, priv->val);
+
+ return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int hydra_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int regnum, u16 value)
+{
+ struct hydra_mdio *priv = bus->priv;
+
+ hydra_mux_mdio(priv->mask, priv->val);
+
+ return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int hydra_mdio_reset(struct mii_dev *bus)
+{
+ struct hydra_mdio *priv = bus->priv;
+
+ return priv->realbus->reset(priv->realbus);
+}
+
+static void hydra_mdio_set_mux(char *name, u8 mask, u8 val)
+{
+ struct mii_dev *bus = miiphy_get_dev_by_name(name);
+ struct hydra_mdio *priv = bus->priv;
+
+ priv->mask = mask;
+ priv->val = val;
+}
+
+static int hydra_mdio_init(char *realbusname, char *fakebusname)
+{
+ struct hydra_mdio *hmdio;
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate Hydra MDIO bus\n");
+ return -1;
+ }
+
+ hmdio = malloc(sizeof(*hmdio));
+ if (!hmdio) {
+ printf("Failed to allocate Hydra private data\n");
+ free(bus);
+ return -1;
+ }
+
+ bus->read = hydra_mdio_read;
+ bus->write = hydra_mdio_write;
+ bus->reset = hydra_mdio_reset;
+ sprintf(bus->name, fakebusname);
+
+ hmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+ if (!hmdio->realbus) {
+ printf("No bus with name %s\n", realbusname);
+ free(bus);
+ free(hmdio);
+ return -1;
+ }
+
+ bus->priv = hmdio;
+
+ return mdio_register(bus);
+}
+
+/*
+ * Given an alias or a path for a node, set the status of that node.
+ *
+ * If 'alias' is not a valid alias, then it is treated as a full path to the
+ * node. No error checking is performed.
+ *
+ * This function is normally called to set the status for a virtual MDIO node.
+ */
+static void fdt_set_node_status(void *fdt, const char *alias,
+ const char *status)
+{
+ const char *path = fdt_get_alias(fdt, alias);
+
+ if (!path)
+ path = alias;
+
+ do_fixup_by_path(fdt, path, "status", status, strlen(status) + 1, 1);
+}
+
+/*
+ * Given an alias or a path for a node, set the mux value of that node.
+ *
+ * If 'alias' is not a valid alias, then it is treated as a full path to the
+ * node. No error checking is performed.
+ *
+ * This function is normally called to set the fsl,hydra-mdio-muxval property
+ * of a virtual MDIO node.
+ */
+static void fdt_set_mdio_mux(void *fdt, const char *alias, u32 mux)
+{
+ const char *path = fdt_get_alias(fdt, alias);
+
+ if (!path)
+ path = alias;
+
+ do_fixup_by_path(fdt, path, "fsl,hydra-mdio-muxval",
+ &mux, sizeof(mux), 1);
+}
+
+/*
+ * Given the following ...
+ *
+ * 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
+ * compatible string and 'addr' physical address)
+ *
+ * 2) An Fman port
+ *
+ * ... update the phy-handle property of the Ethernet node to point to the
+ * right PHY. This assumes that we already know the PHY for each port. That
+ * information is stored in mdio_mux[].
+ *
+ * The offset of the Fman Ethernet node is also passed in for convenience, but
+ * it is not used, and we recalculate the offset anyway.
+ *
+ * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC.
+ * Inside the Fman, "ports" are things that connect to MACs. We only call them
+ * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs
+ * and ports are the same thing.
+ *
+ * Note that this code would be cleaner if had a function called
+ * fm_info_get_phy_address(), which returns a value from the fm1_dtsec_info[]
+ * array. That's because all we're doing is figuring out the PHY address for
+ * a given Fman MAC and writing it to the device tree. Well, we already did
+ * the hard work to figure that out in board_eth_init(), so it's silly to
+ * repeat that here.
+ */
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+ enum fm_port port, int offset)
+{
+ unsigned int mux = mdio_mux[port].val & mdio_mux[port].mask;
+ char phy[16];
+
+ if (port == FM1_10GEC1) {
+ /* XAUI */
+ int lane = serdes_get_first_lane(XAUI_FM1);
+ if (lane >= 0) {
+ /* The XAUI PHY is identified by the slot */
+ sprintf(phy, "phy_xgmii_%u", lane_to_slot[lane]);
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ }
+ return;
+ }
+
+ if (mux == BRDCFG1_EMI1_SEL_RGMII) {
+ /* RGMII */
+ /* The RGMII PHY is identified by the MAC connected to it */
+ sprintf(phy, "phy_rgmii_%u", port == FM1_DTSEC4 ? 0 : 1);
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ }
+
+ /* If it's not RGMII or XGMII, it must be SGMII */
+ if (mux) {
+ /* The SGMII PHY is identified by the MAC connected to it */
+ sprintf(phy, "phy_sgmii_%x",
+ CONFIG_SYS_FM1_DTSEC1_PHY_ADDR + (port - FM1_DTSEC1));
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ }
+}
+
+#define PIXIS_SW2_LANE_23_SEL 0x80
+#define PIXIS_SW2_LANE_45_SEL 0x40
+#define PIXIS_SW2_LANE_67_SEL_MASK 0x30
+#define PIXIS_SW2_LANE_67_SEL_5 0x00
+#define PIXIS_SW2_LANE_67_SEL_6 0x20
+#define PIXIS_SW2_LANE_67_SEL_7 0x10
+#define PIXIS_SW2_LANE_8_SEL 0x08
+#define PIXIS_SW2_LANE_1617_SEL 0x04
+
+/*
+ * Initialize the lane_to_slot[] array.
+ *
+ * On the P4080DS "Expedition" board, the mapping of SERDES lanes to board
+ * slots is hard-coded. On the Hydra board, however, the mapping is controlled
+ * by board switch SW2, so the lane_to_slot[] array needs to be dynamically
+ * initialized.
+ */
+static void initialize_lane_to_slot(void)
+{
+ u8 sw2 = in_8(&PIXIS_SW(2));
+
+ lane_to_slot[2] = (sw2 & PIXIS_SW2_LANE_23_SEL) ? 7 : 4;
+ lane_to_slot[3] = lane_to_slot[2];
+
+ lane_to_slot[4] = (sw2 & PIXIS_SW2_LANE_45_SEL) ? 7 : 6;
+ lane_to_slot[5] = lane_to_slot[4];
+
+ switch (sw2 & PIXIS_SW2_LANE_67_SEL_MASK) {
+ case PIXIS_SW2_LANE_67_SEL_5:
+ lane_to_slot[6] = 5;
+ break;
+ case PIXIS_SW2_LANE_67_SEL_6:
+ lane_to_slot[6] = 6;
+ break;
+ case PIXIS_SW2_LANE_67_SEL_7:
+ lane_to_slot[6] = 7;
+ break;
+ }
+ lane_to_slot[7] = lane_to_slot[6];
+
+ lane_to_slot[8] = (sw2 & PIXIS_SW2_LANE_8_SEL) ? 3 : 0;
+
+ lane_to_slot[16] = (sw2 & PIXIS_SW2_LANE_1617_SEL) ? 1 : 0;
+ lane_to_slot[17] = lane_to_slot[16];
+}
+
+#endif /* #ifdef CONFIG_FMAN_ENET */
+
+/*
+ * Configure the status for the virtual MDIO nodes
+ *
+ * Rather than create the virtual MDIO nodes from scratch for each active
+ * virtual MDIO, we expect the DTS to have the nodes defined already, and we
+ * only enable the ones that are actually active.
+ *
+ * We assume that the DTS already hard-codes the status for all the
+ * virtual MDIO nodes to "disabled", so all we need to do is enable the
+ * active ones.
+ *
+ * For SGMII, we also need to set the mux value in the node.
+ */
+void fdt_fixup_board_enet(void *fdt)
+{
+#ifdef CONFIG_FMAN_ENET
+ unsigned int i;
+ int lane;
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ int idx = i - FM1_DTSEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
+ if (lane >= 0) {
+ fdt_set_node_status(fdt, "emi1_sgmii", "okay");
+ /* Also set the MUX value */
+ fdt_set_mdio_mux(fdt, "emi1_sgmii",
+ mdio_mux[i].val);
+ }
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ fdt_set_node_status(fdt, "emi1_rgmii", "okay");
+ break;
+ default:
+ break;
+ }
+ }
+
+ lane = serdes_get_first_lane(XAUI_FM1);
+ if (lane >= 0)
+ fdt_set_node_status(fdt, "emi2_xgmii", "okay");
+#endif
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+ struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
+ struct fsl_pq_mdio_info dtsec_mdio_info;
+ struct tgec_mdio_info tgec_mdio_info;
+ unsigned int i, slot;
+ int lane;
+
+ printf("Initializing Fman\n");
+
+ initialize_lane_to_slot();
+
+ /*
+ * Set TBIPA on FM1@DTSEC1. This is needed for configurations
+ * where FM1@DTSEC1 isn't used directly, since it provides
+ * MDIO for other ports.
+ */
+ out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
+
+ /* We want to use the PIXIS to configure MUX routing, not GPIOs. */
+ setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL);
+
+ memset(mdio_mux, 0, sizeof(mdio_mux));
+
+ dtsec_mdio_info.regs =
+ (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the real 1G MDIO bus */
+ fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+ tgec_mdio_info.regs =
+ (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+ tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+ /* Register the real 10G MDIO bus */
+ fm_tgec_mdio_init(bis, &tgec_mdio_info);
+
+ /* Register the three virtual MDIO front-ends */
+ hydra_mdio_init(DEFAULT_FM_MDIO_NAME, "HYDRA_RGMII_MDIO");
+ hydra_mdio_init(DEFAULT_FM_MDIO_NAME, "HYDRA_SGMII_MDIO");
+
+ /*
+ * Program the DTSEC PHY addresses assuming that they are all SGMII.
+ * For any DTSEC that's RGMII, we'll override its PHY address later.
+ * We assume that DTSEC5 is only used for RGMII.
+ */
+ fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ int idx = i - FM1_DTSEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot[lane];
+ mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+ switch (slot) {
+ case 1:
+ /* Always DTSEC5 on Bank 3 */
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 2:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 5:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 6:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 7:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 |
+ BRDCFG1_EMI1_EN;
+ break;
+ };
+
+ hydra_mdio_set_mux("HYDRA_SGMII_MDIO",
+ mdio_mux[i].mask, mdio_mux[i].val);
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name("HYDRA_SGMII_MDIO"));
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /*
+ * If DTSEC4 is RGMII, then it's routed via via EC1 to
+ * the first on-board RGMII port. If DTSEC5 is RGMII,
+ * then it's routed via via EC2 to the second on-board
+ * RGMII port. The other DTSECs cannot be routed to
+ * RGMII.
+ */
+ fm_info_set_phy_address(i, i == FM1_DTSEC4 ? 0 : 1);
+ mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII |
+ BRDCFG1_EMI1_EN;
+ hydra_mdio_set_mux("HYDRA_RGMII_MDIO",
+ mdio_mux[i].mask, mdio_mux[i].val);
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name("HYDRA_RGMII_MDIO"));
+ break;
+ case PHY_INTERFACE_MODE_NONE:
+ fm_info_set_phy_address(i, 0);
+ break;
+ default:
+ printf("Fman1: DTSEC%u set to unknown interface %i\n",
+ idx + 1, fm_info_get_enet_if(i));
+ fm_info_set_phy_address(i, 0);
+ break;
+ }
+ }
+
+ /*
+ * For 10G, we only support one XAUI card per Fman. If present, then we
+ * force its routing and never touch those bits again, which removes the
+ * need for Linux to do any muxing. This works because of the way
+ * BRDCFG1 is defined, but it's a bit hackish.
+ *
+ * The PHY address for the XAUI card depends on which slot it's in. The
+ * macros we use imply that the PHY address is based on which FM, but
+ * that's not true. On the P4080DS, FM1 could only use XAUI in slot 5,
+ * and FM2 could only use a XAUI in slot 4. On the Hydra board, we
+ * check the actual slot and just use the macros as-is, even though
+ * the P3041 and P5020 only have one Fman.
+ */
+ lane = serdes_get_first_lane(XAUI_FM1);
+ if (lane >= 0) {
+ slot = lane_to_slot[lane];
+ if (slot == 1) {
+ /* XAUI card is in slot 1 */
+ clrsetbits_8(&pixis->brdcfg1, BRDCFG1_EMI2_SEL_MASK,
+ BRDCFG1_EMI2_SEL_SLOT1);
+ fm_info_set_phy_address(FM1_10GEC1,
+ CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+ } else {
+ /* XAUI card is in slot 2 */
+ clrsetbits_8(&pixis->brdcfg1, BRDCFG1_EMI2_SEL_MASK,
+ BRDCFG1_EMI2_SEL_SLOT2);
+ fm_info_set_phy_address(FM1_10GEC1,
+ CONFIG_SYS_FM2_10GEC1_PHY_ADDR);
+ }
+ }
+
+ fm_info_set_mdio(FM1_10GEC1,
+ miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
+
+ cpu_eth_init(bis);
+#endif
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c
new file mode 100644
index 000000000..d4657f731
--- /dev/null
+++ b/board/freescale/corenet_ds/eth_p4080.c
@@ -0,0 +1,506 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+
+#include "../common/ngpixis.h"
+#include "../common/fman.h"
+#include <asm/fsl_dtsec.h>
+
+#define EMI_NONE 0xffffffff
+#define EMI_MASK 0xf0000000
+#define EMI1_RGMII 0x0
+#define EMI1_SLOT3 0x80000000 /* bank1 EFGH */
+#define EMI1_SLOT4 0x40000000 /* bank2 ABCD */
+#define EMI1_SLOT5 0xc0000000 /* bank3 ABCD */
+#define EMI2_SLOT4 0x10000000 /* bank2 ABCD */
+#define EMI2_SLOT5 0x30000000 /* bank3 ABCD */
+#define EMI1_MASK 0xc0000000
+#define EMI2_MASK 0x30000000
+
+static int mdio_mux[NUM_FM_PORTS];
+
+static char *mdio_names[16] = {
+ "P4080DS_MDIO0",
+ "P4080DS_MDIO1",
+ NULL,
+ "P4080DS_MDIO3",
+ "P4080DS_MDIO4",
+ NULL, NULL, NULL,
+ "P4080DS_MDIO8",
+ NULL, NULL, NULL,
+ "P4080DS_MDIO12",
+ NULL, NULL, NULL,
+};
+
+static char *p4080ds_mdio_name_for_muxval(u32 muxval)
+{
+ return mdio_names[(muxval & EMI_MASK) >> 28];
+}
+
+struct mii_dev *mii_dev_for_muxval(u32 muxval)
+{
+ struct mii_dev *bus;
+ char *name = p4080ds_mdio_name_for_muxval(muxval);
+
+ if (!name) {
+ printf("No bus for muxval %x\n", muxval);
+ return NULL;
+ }
+
+ bus = miiphy_get_dev_by_name(name);
+
+ if (!bus) {
+ printf("No bus by name %s\n", name);
+ return NULL;
+ }
+
+ return bus;
+}
+
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
+int board_phy_config(struct phy_device *phydev)
+{
+ /*
+ * If this is the 10G PHY, and we switched it to fiber,
+ * we need to reset the serdes link for SERDES9
+ */
+ if ((phydev->port == PORT_FIBRE) && (phydev->drv->uid == 0x00a19410)) {
+ enum srds_prtcl device;
+
+ switch (phydev->addr) {
+ case 4:
+ device = XAUI_FM1;
+ break;
+ case 0:
+ device = XAUI_FM2;
+ break;
+ default:
+ device = NONE;
+ }
+
+ serdes_reset_rx(device);
+ }
+
+ return 0;
+}
+#endif
+
+struct p4080ds_mdio {
+ u32 muxval;
+ struct mii_dev *realbus;
+};
+
+static void p4080ds_mux_mdio(u32 muxval)
+{
+ ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+ uint gpioval = in_be32(&pgpio->gpdat) & ~(EMI_MASK);
+ gpioval |= muxval;
+
+ out_be32(&pgpio->gpdat, gpioval);
+}
+
+static int p4080ds_mdio_read(struct mii_dev *bus, int addr, int devad,
+ int regnum)
+{
+ struct p4080ds_mdio *priv = bus->priv;
+
+ p4080ds_mux_mdio(priv->muxval);
+
+ return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int p4080ds_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int regnum, u16 value)
+{
+ struct p4080ds_mdio *priv = bus->priv;
+
+ p4080ds_mux_mdio(priv->muxval);
+
+ return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int p4080ds_mdio_reset(struct mii_dev *bus)
+{
+ struct p4080ds_mdio *priv = bus->priv;
+
+ return priv->realbus->reset(priv->realbus);
+}
+
+static int p4080ds_mdio_init(char *realbusname, u32 muxval)
+{
+ struct p4080ds_mdio *pmdio;
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate P4080DS MDIO bus\n");
+ return -1;
+ }
+
+ pmdio = malloc(sizeof(*pmdio));
+ if (!pmdio) {
+ printf("Failed to allocate P4080DS private data\n");
+ free(bus);
+ return -1;
+ }
+
+ bus->read = p4080ds_mdio_read;
+ bus->write = p4080ds_mdio_write;
+ bus->reset = p4080ds_mdio_reset;
+ sprintf(bus->name, p4080ds_mdio_name_for_muxval(muxval));
+
+ pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+ if (!pmdio->realbus) {
+ printf("No bus with name %s\n", realbusname);
+ free(bus);
+ free(pmdio);
+ return -1;
+ }
+
+ pmdio->muxval = muxval;
+ bus->priv = pmdio;
+
+ return mdio_register(bus);
+}
+
+/*
+ * Sets the specified node's status to the value contained in "status"
+ * If the first character of the specified path is "/" then we use
+ * alias as a path. Otherwise, we look for an alias of that name
+ */
+static void fdt_set_node_status(void *fdt, const char *alias,
+ const char *status)
+{
+ const char *path = fdt_get_alias(fdt, alias);
+
+ if (!path)
+ path = alias;
+
+ do_fixup_by_path(fdt, path, "status", status, strlen(status) + 1, 1);
+}
+
+void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
+ enum fm_port port, int offset)
+{
+ if (mdio_mux[port] == EMI1_RGMII)
+ fdt_set_phy_handle(blob, prop, pa, "phy_rgmii");
+
+ if (mdio_mux[port] == EMI1_SLOT3) {
+ int idx = port - FM2_DTSEC1 + 5;
+ char phy[16];
+
+ sprintf(phy, "phy%d_slot3", idx);
+
+ fdt_set_phy_handle(blob, prop, pa, phy);
+ }
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+ int i;
+
+ /*
+ * P4080DS can be configured in many different ways, supporting a number
+ * of combinations of ethernet devices and phy types. In order to
+ * have just one device tree for all of those configurations, we fix up
+ * the tree here. By default, the device tree configures FM1 and FM2
+ * for SGMII, and configures XAUI on both 10G interfaces. So we have
+ * a number of different variables to track:
+ *
+ * 1) Whether the device is configured at all. Whichever devices are
+ * not enabled should be disabled by setting the "status" property
+ * to "disabled".
+ * 2) What the PHY interface is. If this is an RGMII connection,
+ * we should change the "phy-connection-type" property to
+ * "rgmii"
+ * 3) Which PHY is being used. Because the MDIO buses are muxed,
+ * we need to redirect the "phy-handle" property to point at the
+ * PHY on the right slot/bus.
+ */
+
+ /* We've got six MDIO nodes that may or may not need to exist */
+ fdt_set_node_status(fdt, "emi1_slot3", "disabled");
+ fdt_set_node_status(fdt, "emi1_slot4", "disabled");
+ fdt_set_node_status(fdt, "emi1_slot5", "disabled");
+ fdt_set_node_status(fdt, "emi2_slot4", "disabled");
+ fdt_set_node_status(fdt, "emi2_slot5", "disabled");
+
+ for (i = 0; i < NUM_FM_PORTS; i++) {
+ switch (mdio_mux[i]) {
+ case EMI1_SLOT3:
+ fdt_set_node_status(fdt, "emi1_slot3", "okay");
+ break;
+ case EMI1_SLOT4:
+ fdt_set_node_status(fdt, "emi1_slot4", "okay");
+ break;
+ case EMI1_SLOT5:
+ fdt_set_node_status(fdt, "emi1_slot5", "okay");
+ break;
+ case EMI2_SLOT4:
+ fdt_set_node_status(fdt, "emi2_slot4", "okay");
+ break;
+ case EMI2_SLOT5:
+ fdt_set_node_status(fdt, "emi2_slot5", "okay");
+ break;
+ }
+ }
+}
+
+enum board_slots {
+ SLOT1 = 1,
+ SLOT2,
+ SLOT3,
+ SLOT4,
+ SLOT5,
+ SLOT6,
+};
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+ ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+ struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
+ int i;
+ struct fsl_pq_mdio_info dtsec_mdio_info;
+ struct tgec_mdio_info tgec_mdio_info;
+
+ u8 lane_to_slot[] = {
+ SLOT1, /* 0 - Bank 1:A */
+ SLOT1, /* 1 - Bank 1:B */
+ SLOT2, /* 2 - Bank 1:C */
+ SLOT2, /* 3 - Bank 1:D */
+ SLOT3, /* 4 - Bank 1:E */
+ SLOT3, /* 5 - Bank 1:F */
+ SLOT3, /* 6 - Bank 1:G */
+ SLOT3, /* 7 - Bank 1:H */
+ SLOT6, /* 8 - Bank 1:I */
+ SLOT6, /* 9 - Bank 1:J */
+ SLOT4, /* 10 - Bank 2:A */
+ SLOT4, /* 11 - Bank 2:B */
+ SLOT4, /* 12 - Bank 2:C */
+ SLOT4, /* 13 - Bank 2:D */
+ SLOT5, /* 14 - Bank 3:A */
+ SLOT5, /* 15 - Bank 3:B */
+ SLOT5, /* 16 - Bank 3:C */
+ SLOT5, /* 17 - Bank 3:D */
+ };
+
+ /*
+ * Set TBIPA on FM1@DTSEC1. This is needed for configurations
+ * where FM1@DTSEC1 isn't used directly, since it provides
+ * MDIO for other ports.
+ */
+ out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
+
+ /* Initialize the mdio_mux array so we can recognize empty elements */
+ for (i = 0; i < NUM_FM_PORTS; i++)
+ mdio_mux[i] = EMI_NONE;
+
+ /* The first 4 GPIOs are outputs to control MDIO bus muxing */
+ out_be32(&pgpio->gpdir, EMI_MASK);
+
+ dtsec_mdio_info.regs =
+ (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the 1G MDIO bus */
+ fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+ tgec_mdio_info.regs =
+ (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+ tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+ /* Register the 10G MDIO bus */
+ fm_tgec_mdio_init(bis, &tgec_mdio_info);
+
+ /* Register the 6 muxing front-ends to the MDIO buses */
+ p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII);
+ p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
+ p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
+ p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
+ p4080ds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2_SLOT4);
+ p4080ds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2_SLOT5);
+
+ fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR);
+#endif
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ int idx = i - FM1_DTSEC1, lane, slot;
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot[lane];
+ switch (slot) {
+ case SLOT3:
+ mdio_mux[i] = EMI1_SLOT3;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case SLOT4:
+ mdio_mux[i] = EMI1_SLOT4;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case SLOT5:
+ mdio_mux[i] = EMI1_SLOT5;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ };
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ fm_info_set_phy_address(i, 0);
+ mdio_mux[i] = EMI1_RGMII;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+ int idx = i - FM1_10GEC1, lane, slot;
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ lane = serdes_get_first_lane(XAUI_FM1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot[lane];
+ switch (slot) {
+ case SLOT4:
+ mdio_mux[i] = EMI2_SLOT4;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case SLOT5:
+ mdio_mux[i] = EMI2_SLOT5;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ };
+ break;
+ default:
+ break;
+ }
+ }
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
+ int idx = i - FM2_DTSEC1, lane, slot;
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot[lane];
+ switch (slot) {
+ case SLOT3:
+ mdio_mux[i] = EMI1_SLOT3;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case SLOT4:
+ mdio_mux[i] = EMI1_SLOT4;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case SLOT5:
+ mdio_mux[i] = EMI1_SLOT5;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ };
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ fm_info_set_phy_address(i, 0);
+ mdio_mux[i] = EMI1_RGMII;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
+ int idx = i - FM2_10GEC1, lane, slot;
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ lane = serdes_get_first_lane(XAUI_FM2 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot[lane];
+ switch (slot) {
+ case SLOT4:
+ mdio_mux[i] = EMI2_SLOT4;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case SLOT5:
+ mdio_mux[i] = EMI2_SLOT5;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ };
+ break;
+ default:
+ break;
+ }
+ }
+#endif
+
+ cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/mpc8349emds/Makefile b/board/freescale/mpc8349emds/Makefile
index 4f76eab23..601c3bf7b 100644
--- a/board/freescale/mpc8349emds/Makefile
+++ b/board/freescale/mpc8349emds/Makefile
@@ -27,6 +27,7 @@ LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_PCI) += pci.o
+COBJS-$(CONFIG_FSL_DDR2) += ddr.o
COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/freescale/mpc8349emds/ddr.c b/board/freescale/mpc8349emds/ddr.c
new file mode 100644
index 000000000..0209c1eca
--- /dev/null
+++ b/board/freescale/mpc8349emds/ddr.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+struct board_specific_parameters {
+ u32 datarate_mhz_low;
+ u32 datarate_mhz_high;
+ u32 n_ranks;
+ u32 clk_adjust;
+ u32 cpo;
+ u32 write_data_delay;
+ u32 force_2T;
+};
+
+const struct board_specific_parameters board_specific_parameters_udimm[][20] = {
+ {
+ /*
+ * memory controller 0
+ * lo| hi| num| clk| cpo|wrdata|2T
+ * mhz| mhz|ranks|adjst| | delay|
+ */
+ { 0, 300, 2, 4, 4, 2, 0},
+ {301, 365, 2, 4, 6, 2, 0},
+ {366, 450, 2, 4, 7, 2, 0},
+ {451, 850, 2, 4, 31, 2, 0},
+ { 0, 300, 1, 4, 4, 2, 0},
+ {301, 365, 1, 4, 6, 2, 0},
+ {366, 450, 1, 4, 7, 2, 0},
+ {451, 850, 1, 4, 31, 2, 0}
+ }
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ const struct board_specific_parameters *pbsp;
+ u32 num_params;
+ u32 i, dimm_num;
+ ulong ddr_freq;
+
+ if (ctrl_num != 0) /* we have only one controller */
+ return;
+ for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+ if (pdimm[i].n_ranks)
+ break;
+ }
+ if (i >= CONFIG_DIMM_SLOTS_PER_CTLR) /* no DIMM */
+ return;
+
+ dimm_num = i;
+ pbsp = &(board_specific_parameters_udimm[ctrl_num][0]);
+ num_params = sizeof(board_specific_parameters_udimm[ctrl_num]) /
+ sizeof(board_specific_parameters_udimm[0][0]);
+
+ /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ for (i = 0; i < num_params; i++) {
+ if (ddr_freq >= pbsp->datarate_mhz_low &&
+ ddr_freq <= pbsp->datarate_mhz_high &&
+ pdimm[dimm_num].n_ranks == pbsp->n_ranks) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->cpo_override = pbsp->cpo;
+ popts->write_data_delay = pbsp->write_data_delay;
+ popts->twoT_en = pbsp->force_2T;
+ break;
+ }
+ pbsp++;
+ }
+
+ if (i == num_params) {
+ printf("Warning: board specific timing not found "
+ "for data rate %lu MT/s!\n", ddr_freq);
+ }
+
+ /*
+ * Factors to consider for half-strength driver enable:
+ * - number of DIMMs installed
+ */
+ popts->half_strength_driver_enable = 0;
+ popts->DQS_config = 0; /* only true DQS signal is used on board */
+}
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 365ac3792..620540f83 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -29,7 +29,11 @@
#include <i2c.h>
#include <spi.h>
#include <miiphy.h>
+#ifdef CONFIG_FSL_DDR2
+#include <asm/fsl_ddr_sdram.h>
+#else
#include <spd_sdram.h>
+#endif
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
@@ -62,7 +66,7 @@ int board_early_init_f (void)
phys_size_t initdram (int board_type)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- u32 msize = 0;
+ phys_size_t msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
@@ -70,24 +74,24 @@ phys_size_t initdram (int board_type)
/* DDR SDRAM - Main SODIMM */
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
#if defined(CONFIG_SPD_EEPROM)
- msize = spd_sdram();
+#ifndef CONFIG_FSL_DDR2
+ msize = spd_sdram() * 1024 * 1024;
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ ddr_enable_ecc(msize);
+#endif
+#else
+ msize = fsl_ddr_sdram();
+#endif
#else
- msize = fixed_sdram();
+ msize = fixed_sdram() * 1024 * 1024;
#endif
/*
* Initialize SDRAM if it is on local bus.
*/
sdram_init();
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(msize * 1024 * 1024);
-#endif
-
/* return total bus SDRAM size(bytes) -- DDR */
- return (msize * 1024 * 1024);
+ return msize;
}
#if !defined(CONFIG_SPD_EEPROM)
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 0d3752d56..d127137dd 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2011 Freescale Semiconductor.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
@@ -200,6 +200,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
int checkboard (void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ char buf[32];
/* PCI slot in USER bits CSR[6:7] by convention. */
uint pci_slot = get_pci_slot ();
@@ -222,8 +223,7 @@ int checkboard (void)
printf("PCI1: %d bit, %s MHz, %s\n",
(pci1_32) ? 32 : 64,
- (pci1_speed == 33000000) ? "33" :
- (pci1_speed == 66000000) ? "66" : "unknown",
+ strmhz(buf, pci1_speed),
pci1_clk_sel ? "sync" : "async");
if (pci_dual) {
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index 5ffae47d7..3bcaac485 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -30,7 +30,6 @@
#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_serdes.h>
-#include <spd_sdram.h>
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
@@ -39,8 +38,6 @@
#include "../common/eeprom.h"
#include "../common/via.h"
-DECLARE_GLOBAL_DATA_PTR;
-
void local_bus_init(void);
int checkboard (void)
@@ -123,7 +120,7 @@ void lbc_sdram_init(void)
puts("LBC SDRAM: ");
print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
- "\n ");
+ "\n");
/*
* Setup SDRAM Base and Option Registers
@@ -210,10 +207,6 @@ static struct pci_config_table pci_mpc85xxcds_config_table[] = {
static struct pci_controller pci1_hose;
#endif /* CONFIG_PCI */
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif /* CONFIG_PCI2 */
-
void pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -221,6 +214,7 @@ void pci_init_board(void)
u32 devdisr, pordevsr, io_sel;
u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
int first_free_busno = 0;
+ char buf[32];
devdisr = in_be32(&gur->devdisr);
pordevsr = in_be32(&gur->pordevsr);
@@ -243,10 +237,9 @@ void pci_init_board(void)
law_size_bits(pci_info.io_size), pci_info.law);
pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
- printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+ printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
- (pci_speed == 33333000) ? "33" :
- (pci_speed == 66666000) ? "66" : "unknown",
+ strmhz(buf, pci_speed),
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter",
@@ -268,7 +261,7 @@ void pci_init_board(void)
}
#endif
} else {
- printf("PCI: disabled\n");
+ printf("PCI1: disabled\n");
}
puts("\n");
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index 60d1758af..48ede9840 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2011 Freescale Semiconductor.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -198,6 +198,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
int checkboard (void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ char buf[32];
/* PCI slot in USER bits CSR[6:7] by convention. */
uint pci_slot = get_pci_slot ();
@@ -220,8 +221,7 @@ int checkboard (void)
printf("PCI1: %d bit, %s MHz, %s\n",
(pci1_32) ? 32 : 64,
- (pci1_speed == 33000000) ? "33" :
- (pci1_speed == 66000000) ? "66" : "unknown",
+ strmhz(buf, pci1_speed),
pci1_clk_sel ? "sync" : "async");
if (pci_dual) {
diff --git a/board/freescale/p1010rdb/Makefile b/board/freescale/p1010rdb/Makefile
new file mode 100644
index 000000000..1dcd49072
--- /dev/null
+++ b/board/freescale/p1010rdb/Makefile
@@ -0,0 +1,52 @@
+#
+# Copyright 2010-2011 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y += $(BOARD).o
+COBJS-y += ddr.o
+COBJS-y += law.o
+COBJS-y += tlb.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c
new file mode 100644
index 000000000..e5d8423df
--- /dev/null
+++ b/board/freescale/p1010rdb/ddr.c
@@ -0,0 +1,250 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <asm/io.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_DDR_RAW_TIMING
+#define CONFIG_SYS_DRAM_SIZE 1024
+
+fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
+ .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
+ .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
+ .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
+ .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
+ .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
+ .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
+ .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
+ .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
+ .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
+ .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
+ .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
+ .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
+ .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
+ .ddr_data_init = CONFIG_MEM_INIT_VALUE,
+ .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
+ .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
+ .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
+ .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
+ .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
+ .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
+ .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
+ .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
+ .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
+ .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
+};
+
+fsl_ddr_cfg_regs_t ddr_cfg_regs_667 = {
+ .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
+ .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
+ .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
+ .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_667,
+ .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_667,
+ .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_667,
+ .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_667,
+ .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
+ .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
+ .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_667,
+ .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_667,
+ .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
+ .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_667,
+ .ddr_data_init = CONFIG_MEM_INIT_VALUE,
+ .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_667,
+ .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
+ .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
+ .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
+ .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
+ .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
+ .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_667,
+ .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
+ .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
+ .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
+};
+
+fixed_ddr_parm_t fixed_ddr_parm_0[] = {
+ {750, 850, &ddr_cfg_regs_800},
+ {607, 749, &ddr_cfg_regs_667},
+ {0, 0, NULL}
+};
+
+unsigned long get_sdram_size(void)
+{
+ struct cpu_type *cpu;
+ phys_size_t ddr_size;
+
+ cpu = gd->cpu;
+ /* P1014 and it's derivatives support max 16it DDR width */
+ if (cpu->soc_ver == SVR_P1014 || cpu->soc_ver == SVR_P1014_E)
+ ddr_size = (CONFIG_SYS_DRAM_SIZE / 2);
+ else
+ ddr_size = CONFIG_SYS_DRAM_SIZE;
+
+ return ddr_size;
+}
+
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+phys_size_t fixed_sdram(void)
+{
+ int i;
+ char buf[32];
+ fsl_ddr_cfg_regs_t ddr_cfg_regs;
+ phys_size_t ddr_size;
+ ulong ddr_freq, ddr_freq_mhz;
+ struct cpu_type *cpu;
+
+#if defined(CONFIG_SYS_RAMBOOT)
+ return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+#endif
+
+ ddr_freq = get_ddr_freq(0);
+ ddr_freq_mhz = ddr_freq / 1000000;
+
+ printf("Configuring DDR for %s MT/s data rate\n",
+ strmhz(buf, ddr_freq));
+
+ for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
+ if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
+ (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
+ memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
+ sizeof(ddr_cfg_regs));
+ break;
+ }
+ }
+
+ if (fixed_ddr_parm_0[i].max_freq == 0)
+ panic("Unsupported DDR data rate %s MT/s data rate\n",
+ strmhz(buf, ddr_freq));
+
+ cpu = gd->cpu;
+ /* P1014 and it's derivatives support max 16bit DDR width */
+ if (cpu->soc_ver == SVR_P1014 || cpu->soc_ver == SVR_P1014_E) {
+ ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_16_BE;
+ ddr_cfg_regs.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS >> 1;
+ ddr_cfg_regs.ddr_sdram_cfg &= ~0x00180000;
+ ddr_cfg_regs.ddr_sdram_cfg |= 0x001080000;
+ }
+
+ ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+ fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
+
+ if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
+ LAW_TRGT_IF_DDR_1) < 0) {
+ printf("ERROR setting Local Access Windows for DDR\n");
+ return 0;
+ }
+
+ return ddr_size;
+}
+
+#else /* CONFIG_DDR_RAW_TIMING */
+/*
+ * Samsung K4B2G0846C-HCF8
+ * The following timing are for "downshift"
+ * i.e. to use CL9 part as CL7
+ * otherwise, tAA, tRCD, tRP will be 13500ps
+ * and tRC will be 49500ps
+ */
+dimm_params_t ddr_raw_timing = {
+ .n_ranks = 1,
+ .rank_density = 1073741824u,
+ .capacity = 1073741824u,
+ .primary_sdram_width = 32,
+ .ec_sdram_width = 0,
+ .registered_dimm = 0,
+ .mirrored_dimm = 0,
+ .n_row_addr = 15,
+ .n_col_addr = 10,
+ .n_banks_per_sdram_device = 8,
+ .edc_config = 0,
+ .burst_lengths_bitmask = 0x0c,
+
+ .tCKmin_X_ps = 1875,
+ .caslat_X = 0x1e << 4, /* 5,6,7,8 */
+ .tAA_ps = 13125,
+ .tWR_ps = 15000,
+ .tRCD_ps = 13125,
+ .tRRD_ps = 7500,
+ .tRP_ps = 13125,
+ .tRAS_ps = 37500,
+ .tRC_ps = 50625,
+ .tRFC_ps = 160000,
+ .tWTR_ps = 7500,
+ .tRTP_ps = 7500,
+ .refresh_rate_ps = 7800000,
+ .tFAW_ps = 37500,
+};
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+ unsigned int controller_number,
+ unsigned int dimm_number)
+{
+ const char dimm_model[] = "Fixed DDR on board";
+
+ if ((controller_number == 0) && (dimm_number == 0)) {
+ memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+ memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+ memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+ }
+
+ return 0;
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ struct cpu_type *cpu;
+ int i;
+ popts->clk_adjust = 6;
+ popts->cpo_override = 0x1f;
+ popts->write_data_delay = 2;
+ popts->half_strength_driver_enable = 1;
+ /* Write leveling override */
+ popts->wrlvl_en = 1;
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0xf;
+ popts->wrlvl_start = 0x8;
+ popts->trwt_override = 1;
+ popts->trwt = 0;
+
+ cpu = gd->cpu;
+ /* P1014 and it's derivatives support max 16it DDR width */
+ if (cpu->soc_ver == SVR_P1014 || cpu->soc_ver == SVR_P1014_E)
+ popts->data_bus_width = DDR_DATA_BUS_WIDTH_16;
+
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
+ popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
+ }
+}
+
+#endif /* CONFIG_DDR_RAW_TIMING */
diff --git a/board/freescale/p1010rdb/law.c b/board/freescale/p1010rdb/law.c
new file mode 100644
index 000000000..3ed77fc40
--- /dev/null
+++ b/board/freescale/p1010rdb/law.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SDCARD
+ SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_IFC),
+ SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
+ SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
new file mode 100644
index 000000000..03e9da194
--- /dev/null
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -0,0 +1,330 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <mmc.h>
+#include <netdev.h>
+#include <pci.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_ifc.h>
+#include <asm/fsl_pci.h>
+
+#ifndef CONFIG_SDCARD
+#include <hwconfig.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GPIO4_PCIE_RESET_SET 0x08000000
+#define MUX_CPLD_CAN_UART 0x00
+#define MUX_CPLD_TDM 0x01
+#define MUX_CPLD_SPICS0_FLASH 0x00
+#define MUX_CPLD_SPICS0_SLIC 0x02
+
+#ifndef CONFIG_SDCARD
+struct cpld_data {
+ u8 cpld_ver; /* cpld revision */
+ u8 pcba_ver; /* pcb revision number */
+ u8 twindie_ddr3;
+ u8 res1[6];
+ u8 bank_sel; /* NOR Flash bank */
+ u8 res2[5];
+ u8 usb2_sel;
+ u8 res3[1];
+ u8 porsw_sel;
+ u8 tdm_can_sel;
+ u8 spi_cs0_sel; /* SPI CS0 SLIC/SPI Flash */
+ u8 por0; /* POR Options */
+ u8 por1; /* POR Options */
+ u8 por2; /* POR Options */
+ u8 por3; /* POR Options */
+};
+
+void cpld_show(void)
+{
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+ printf("CPLD: V%x.%x PCBA: V%x.0\n",
+ in_8(&cpld_data->cpld_ver) & 0xF0,
+ in_8(&cpld_data->cpld_ver) & 0x0F,
+ in_8(&cpld_data->pcba_ver) & 0x0F);
+
+#ifdef CONFIG_DEBUG
+ printf("twindie_ddr =%x\n",
+ in_8(&cpld_data->twindie_ddr3));
+ printf("bank_sel =%x\n",
+ in_8(&cpld_data->bank_sel));
+ printf("usb2_sel =%x\n",
+ in_8(&cpld_data->usb2_sel));
+ printf("porsw_sel =%x\n",
+ in_8(&cpld_data->porsw_sel));
+ printf("tdm_can_sel =%x\n",
+ in_8(&cpld_data->tdm_can_sel));
+ printf("tdm_can_sel =%x\n",
+ in_8(&cpld_data->tdm_can_sel));
+ printf("spi_cs0_sel =%x\n",
+ in_8(&cpld_data->spi_cs0_sel));
+ printf("bcsr0 =%x\n",
+ in_8(&cpld_data->bcsr0));
+ printf("bcsr1 =%x\n",
+ in_8(&cpld_data->bcsr1));
+ printf("bcsr2 =%x\n",
+ in_8(&cpld_data->bcsr2));
+ printf("bcsr3 =%x\n",
+ in_8(&cpld_data->bcsr3));
+#endif
+}
+#endif
+
+int board_early_init_f(void)
+{
+ ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+#ifndef CONFIG_SDCARD
+ struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
+
+ /* Clock configuration to access CPLD using IFC(GPCM) */
+ setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
+#endif
+ /*
+ * Reset PCIe slots via GPIO4
+ */
+ setbits_be32(&pgpio->gpdir, GPIO4_PCIE_RESET_SET);
+ setbits_be32(&pgpio->gpdat, GPIO4_PCIE_RESET_SET);
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+#ifndef CONFIG_SDCARD
+ const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+ /*
+ * Remap Boot flash region to caching-inhibited
+ * so that flash can be erased properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+
+ /* invalidate existing TLB entry for flash */
+ disable_tlb(flash_esel);
+
+ set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, flash_esel, BOOKE_PAGESZ_16M, 1);
+
+ set_tlb(1, flashbase + 0x1000000,
+ CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, flash_esel+1, BOOKE_PAGESZ_16M, 1);
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+ fsl_pcie_init_board(0);
+}
+#endif /* ifdef CONFIG_PCI */
+
+int checkboard(void)
+{
+ struct cpu_type *cpu;
+
+ cpu = gd->cpu;
+ printf("Board: %sRDB ", cpu->name);
+#ifdef CONFIG_PHYS_64BIT
+ puts("(36-bit addrmap)");
+#endif
+ puts("\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+ struct fsl_pq_mdio_info mdio_info;
+ struct tsec_info_struct tsec_info[4];
+ struct cpu_type *cpu;
+ int num = 0;
+
+ cpu = gd->cpu;
+
+#ifdef CONFIG_TSEC1
+ SET_STD_TSEC_INFO(tsec_info[num], 1);
+ num++;
+#endif
+#ifdef CONFIG_TSEC2
+ SET_STD_TSEC_INFO(tsec_info[num], 2);
+ num++;
+#endif
+#ifdef CONFIG_TSEC3
+ /* P1014 and it's derivatives do not support eTSEC3 */
+ if (cpu->soc_ver != SVR_P1014 && cpu->soc_ver != SVR_P1014_E) {
+ SET_STD_TSEC_INFO(tsec_info[num], 3);
+ num++;
+ }
+#endif
+ if (!num) {
+ printf("No TSECs initialized\n");
+ return 0;
+ }
+
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+
+ fsl_pq_mdio_init(bis, &mdio_info);
+
+ tsec_eth_init(bis, tsec_info, num);
+
+ return pci_eth_init(bis);
+}
+#endif
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void fdt_del_flexcan(void *blob)
+{
+ int nodeoff = 0;
+
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+ "fsl,flexcan-v1.0")) >= 0) {
+ fdt_del_node(blob, nodeoff);
+ }
+}
+
+void fdt_del_spi_flash(void *blob)
+{
+ int nodeoff = 0;
+
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+ "spansion,s25sl12801")) >= 0) {
+ fdt_del_node(blob, nodeoff);
+ }
+}
+
+void fdt_del_spi_slic(void *blob)
+{
+ int nodeoff = 0;
+
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+ "zarlink,le88266")) >= 0) {
+ fdt_del_node(blob, nodeoff);
+ }
+}
+
+void fdt_del_tdm(void *blob)
+{
+ int nodeoff = 0;
+
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+ "fsl,starlite-tdm")) >= 0) {
+ fdt_del_node(blob, nodeoff);
+ }
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ phys_addr_t base;
+ phys_size_t size;
+ struct cpu_type *cpu;
+
+ cpu = gd->cpu;
+
+ ft_cpu_setup(blob, bd);
+
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+
+#if defined(CONFIG_PCI)
+ FT_FSL_PCI_SETUP;
+#endif
+
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+ fdt_fixup_dr_usb(blob, bd);
+
+ /* P1014 and it's derivatives don't support CAN and eTSEC3 */
+ if (cpu->soc_ver == SVR_P1014 || cpu->soc_ver == SVR_P1014_E) {
+ fdt_del_flexcan(blob);
+ fdt_del_node_and_alias(blob, "ethernet2");
+ }
+#ifndef CONFIG_SDCARD
+ if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
+ printf("fdt CAN");
+ fdt_del_tdm(blob);
+ fdt_del_spi_slic(blob);
+ }
+#ifndef CONFIG_SPIFLASH
+ else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
+ printf("fdt TDM");
+ fdt_del_flexcan(blob);
+ fdt_del_spi_flash(blob);
+ }
+#endif
+#endif
+}
+#endif
+
+#ifndef CONFIG_SDCARD
+int misc_init_r(void)
+{
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
+ clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN1_TDM |
+ MPC85xx_PMUXCR_CAN1_UART |
+ MPC85xx_PMUXCR_CAN2_TDM |
+ MPC85xx_PMUXCR_CAN2_UART);
+ out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
+ }
+#ifndef CONFIG_SPIFLASH
+ if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
+ printf("TDM");
+ clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART |
+ MPC85xx_PMUXCR_CAN1_UART);
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_TDM |
+ MPC85xx_PMUXCR_CAN1_TDM);
+ clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO);
+ setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM);
+ out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
+ out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
+ }
+#endif
+ return 0;
+}
+#endif
diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c
new file mode 100644
index 000000000..4256bf4e5
--- /dev/null
+++ b/board/freescale/p1010rdb/tlb.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
+ CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
+ CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
+ CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* TLB 1 */
+ /* *I*** - Covers boot page */
+ SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_4K, 1),
+
+ /* *I*G* - CCSRBAR */
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_1M, 1),
+
+#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SDCARD
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_16M, 1),
+
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x1000000,
+ CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
+ MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_16M, 1),
+#endif
+
+#ifdef CONFIG_PCI
+ /* *I*G* - PCI */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_1G, 1),
+
+ /* *I*G* - PCI I/O */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256K, 1),
+#endif
+#endif
+
+#ifndef CONFIG_SDCARD
+ /* *I*G - Board CPLD */
+ SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_256K, 1),
+
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_1M, 1),
+#endif
+
+#if defined(CONFIG_SYS_RAMBOOT)
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 8, BOOKE_PAGESZ_1G, 1)
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c
index 8cfd199d6..546819cb5 100644
--- a/board/freescale/p1023rds/p1023rds.c
+++ b/board/freescale/p1023rds/p1023rds.c
@@ -38,6 +38,11 @@
#include <fdt_support.h>
#include <netdev.h>
#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
#include "bcsr.h"
@@ -143,6 +148,39 @@ unsigned long get_board_ddr_clk(ulong dummy)
int board_eth_init(bd_t *bis)
{
+ u8 *bcsr = (u8 *)BCSR_ACCESS_REG_ADDR;
+ ccsr_gur_t *gur = (ccsr_gur_t *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ struct fsl_pq_mdio_info dtsec_mdio_info;
+
+ /*
+ * Need to set dTSEC 1 pin multiplexing to TSEC. The default setting
+ * is not correct.
+ */
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TSEC1_1);
+
+ dtsec_mdio_info.regs =
+ (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the 1G MDIO bus */
+ fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+ fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+
+ fm_info_set_mdio(FM1_DTSEC1,
+ miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+ fm_info_set_mdio(FM1_DTSEC2,
+ miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+
+ /* Make SERDES connected to SGMII by cleaing bcsr19[7] */
+ if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_SGMII)
+ clrbits_8(&bcsr[19], BCSR19_SGMII_SEL_L);
+
+#ifdef CONFIG_FMAN_ENET
+ cpu_eth_init(bis);
+#endif
+
return pci_eth_init(bis);
}
@@ -158,5 +196,7 @@ void ft_board_setup(void *blob, bd_t *bd)
size = getenv_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+ fdt_fixup_fman_ethernet(blob);
}
#endif
diff --git a/board/freescale/p1_p2_rdb_pc/Makefile b/board/freescale/p1_p2_rdb_pc/Makefile
new file mode 100644
index 000000000..8056af833
--- /dev/null
+++ b/board/freescale/p1_p2_rdb_pc/Makefile
@@ -0,0 +1,52 @@
+#
+# Copyright 2010-2011 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y += $(BOARD).o
+COBJS-y += ddr.o
+COBJS-y += law.o
+COBJS-y += tlb.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
new file mode 100644
index 000000000..f0cbde72a
--- /dev/null
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -0,0 +1,292 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <asm/io.h>
+#include <asm/fsl_law.h>
+
+#ifdef CONFIG_DDR_RAW_TIMING
+#if defined(CONFIG_P1020RDB_PROTO) || \
+ defined(CONFIG_P1021RDB) || \
+ defined(CONFIG_P1020UTM)
+/* Micron MT41J256M8_187E */
+dimm_params_t ddr_raw_timing = {
+ .n_ranks = 1,
+ .rank_density = 1073741824u,
+ .capacity = 1073741824u,
+ .primary_sdram_width = 32,
+ .ec_sdram_width = 0,
+ .registered_dimm = 0,
+ .mirrored_dimm = 0,
+ .n_row_addr = 15,
+ .n_col_addr = 10,
+ .n_banks_per_sdram_device = 8,
+ .edc_config = 0,
+ .burst_lengths_bitmask = 0x0c,
+
+ .tCKmin_X_ps = 1870,
+ .caslat_X = 0x1e << 4, /* 5,6,7,8 */
+ .tAA_ps = 13125,
+ .tWR_ps = 15000,
+ .tRCD_ps = 13125,
+ .tRRD_ps = 7500,
+ .tRP_ps = 13125,
+ .tRAS_ps = 37500,
+ .tRC_ps = 50625,
+ .tRFC_ps = 160000,
+ .tWTR_ps = 7500,
+ .tRTP_ps = 7500,
+ .refresh_rate_ps = 7800000,
+ .tFAW_ps = 37500,
+};
+#elif defined(CONFIG_P2020RDB)
+/* Micron MT41J128M16_15E */
+dimm_params_t ddr_raw_timing = {
+ .n_ranks = 1,
+ .rank_density = 1073741824u,
+ .capacity = 1073741824u,
+ .primary_sdram_width = 64,
+ .ec_sdram_width = 0,
+ .registered_dimm = 0,
+ .mirrored_dimm = 0,
+ .n_row_addr = 14,
+ .n_col_addr = 10,
+ .n_banks_per_sdram_device = 8,
+ .edc_config = 0,
+ .burst_lengths_bitmask = 0x0c,
+
+ .tCKmin_X_ps = 1500,
+ .caslat_X = 0x7e << 4, /* 5,6,7,8,9,10 */
+ .tAA_ps = 13500,
+ .tWR_ps = 15000,
+ .tRCD_ps = 13500,
+ .tRRD_ps = 6000,
+ .tRP_ps = 13500,
+ .tRAS_ps = 36000,
+ .tRC_ps = 49500,
+ .tRFC_ps = 160000,
+ .tWTR_ps = 7500,
+ .tRTP_ps = 7500,
+ .refresh_rate_ps = 7800000,
+ .tFAW_ps = 30000,
+};
+#elif defined(CONFIG_P1020MBG)
+/* Micron MT41J512M8_187E */
+dimm_params_t ddr_raw_timing = {
+ .n_ranks = 2,
+ .rank_density = 1073741824u,
+ .capacity = 2147483648u,
+ .primary_sdram_width = 32,
+ .ec_sdram_width = 0,
+ .registered_dimm = 0,
+ .mirrored_dimm = 0,
+ .n_row_addr = 15,
+ .n_col_addr = 10,
+ .n_banks_per_sdram_device = 8,
+ .edc_config = 0,
+ .burst_lengths_bitmask = 0x0c,
+
+ .tCKmin_X_ps = 1870,
+ .caslat_X = 0x1e << 4, /* 5,6,7,8 */
+ .tAA_ps = 13125,
+ .tWR_ps = 15000,
+ .tRCD_ps = 13125,
+ .tRRD_ps = 7500,
+ .tRP_ps = 13125,
+ .tRAS_ps = 37500,
+ .tRC_ps = 50625,
+ .tRFC_ps = 160000,
+ .tWTR_ps = 7500,
+ .tRTP_ps = 7500,
+ .refresh_rate_ps = 7800000,
+ .tFAW_ps = 37500,
+};
+#elif defined(CONFIG_P1020RDB)
+/*
+ * Samsung K4B2G0846C-HCF8
+ * The following timing are for "downshift"
+ * i.e. to use CL9 part as CL7
+ * otherwise, tAA, tRCD, tRP will be 13500ps
+ * and tRC will be 49500ps
+ */
+dimm_params_t ddr_raw_timing = {
+ .n_ranks = 1,
+ .rank_density = 1073741824u,
+ .capacity = 1073741824u,
+ .primary_sdram_width = 32,
+ .ec_sdram_width = 0,
+ .registered_dimm = 0,
+ .mirrored_dimm = 0,
+ .n_row_addr = 15,
+ .n_col_addr = 10,
+ .n_banks_per_sdram_device = 8,
+ .edc_config = 0,
+ .burst_lengths_bitmask = 0x0c,
+
+ .tCKmin_X_ps = 1875,
+ .caslat_X = 0x1e << 4, /* 5,6,7,8 */
+ .tAA_ps = 13125,
+ .tWR_ps = 15000,
+ .tRCD_ps = 13125,
+ .tRRD_ps = 7500,
+ .tRP_ps = 13125,
+ .tRAS_ps = 37500,
+ .tRC_ps = 50625,
+ .tRFC_ps = 160000,
+ .tWTR_ps = 7500,
+ .tRTP_ps = 7500,
+ .refresh_rate_ps = 7800000,
+ .tFAW_ps = 37500,
+};
+#elif defined(CONFIG_P1024RDB) || \
+ defined(CONFIG_P1025RDB)
+/*
+ * Samsung K4B2G0846C-HCH9
+ * The following timing are for "downshift"
+ * i.e. to use CL9 part as CL7
+ * otherwise, tAA, tRCD, tRP will be 13500ps
+ * and tRC will be 49500ps
+ */
+dimm_params_t ddr_raw_timing = {
+ .n_ranks = 1,
+ .rank_density = 1073741824u,
+ .capacity = 1073741824u,
+ .primary_sdram_width = 32,
+ .ec_sdram_width = 0,
+ .registered_dimm = 0,
+ .mirrored_dimm = 0,
+ .n_row_addr = 15,
+ .n_col_addr = 10,
+ .n_banks_per_sdram_device = 8,
+ .edc_config = 0,
+ .burst_lengths_bitmask = 0x0c,
+
+ .tCKmin_X_ps = 1500,
+ .caslat_X = 0x3e << 4, /* 5,6,7,8,9 */
+ .tAA_ps = 13125,
+ .tWR_ps = 15000,
+ .tRCD_ps = 13125,
+ .tRRD_ps = 6000,
+ .tRP_ps = 13125,
+ .tRAS_ps = 36000,
+ .tRC_ps = 49125,
+ .tRFC_ps = 160000,
+ .tWTR_ps = 7500,
+ .tRTP_ps = 7500,
+ .refresh_rate_ps = 7800000,
+ .tFAW_ps = 30000,
+};
+#else
+#error Missing raw timing data for this board
+#endif
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+ unsigned int controller_number,
+ unsigned int dimm_number)
+{
+ const char dimm_model[] = "Fixed DDR on board";
+
+ if ((controller_number == 0) && (dimm_number == 0)) {
+ memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+ memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+ memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+ }
+
+ return 0;
+}
+#endif /* CONFIG_DDR_RAW_TIMING */
+
+/* Fixed sdram init -- doesn't use serial presence detect. */
+phys_size_t fixed_sdram(void)
+{
+ sys_info_t sysinfo;
+ char buf[32];
+ size_t ddr_size;
+ fsl_ddr_cfg_regs_t ddr_cfg_regs = {
+ .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
+ .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
+ .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
+#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
+ .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
+ .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
+ .cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2,
+#endif
+ .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3,
+ .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0,
+ .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1,
+ .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2,
+ .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
+ .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
+ .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1,
+ .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2,
+ .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
+ .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL,
+ .ddr_data_init = CONFIG_SYS_DDR_DATA_INIT,
+ .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL,
+ .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
+ .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
+ .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
+ .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
+ .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
+ .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
+ .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
+ .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
+ .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
+ };
+
+ get_sys_info(&sysinfo);
+ printf("Configuring DDR for %s MT/s data rate\n",
+ strmhz(buf, sysinfo.freqDDRBus));
+
+ ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+
+ fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
+
+ if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
+ ddr_size, LAW_TRGT_IF_DDR_1) < 0) {
+ printf("ERROR setting Local Access Windows for DDR\n");
+ return 0;
+ };
+
+ return ddr_size;
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ int i;
+ popts->clk_adjust = 6;
+ popts->cpo_override = 0x1f;
+ popts->write_data_delay = 2;
+ popts->half_strength_driver_enable = 1;
+ /* Write leveling override */
+ popts->wrlvl_en = 1;
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0xf;
+ popts->wrlvl_start = 0x8;
+ popts->trwt_override = 1;
+ popts->trwt = 0;
+
+ if (pdimm->primary_sdram_width == 64)
+ popts->data_bus_width = 0;
+ else if (pdimm->primary_sdram_width == 32)
+ popts->data_bus_width = 1;
+ else
+ printf("Error in DDR bus width configuration!\n");
+
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
+ popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
+ }
+}
diff --git a/board/freescale/p2041rdb/law.c b/board/freescale/p1_p2_rdb_pc/law.c
index 127a478e4..5ff6ea6aa 100644
--- a/board/freescale/p2041rdb/law.c
+++ b/board/freescale/p1_p2_rdb_pc/law.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -25,12 +25,14 @@
#include <asm/mmu.h>
struct law_entry law_table[] = {
- SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
- SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_BMAN),
- SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_QMAN),
- SET_LAW(CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
+ SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC),
+ SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+ SET_LAW(CONFIG_SYS_PMC_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC),
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+ SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+#endif
+#ifdef CONFIG_VSC7385_ENET
+ SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
#endif
};
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
new file mode 100644
index 000000000..4671128af
--- /dev/null
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -0,0 +1,449 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <hwconfig.h>
+#include <pci.h>
+#include <i2c.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/io.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_lbc.h>
+#include <asm/mp.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <vsc7385.h>
+#include <ioports.h>
+#include <asm/fsl_serdes.h>
+#include <netdev.h>
+
+#ifdef CONFIG_QE
+
+#define GPIO_GETH_SW_PORT 1
+#define GPIO_GETH_SW_PIN 29
+#define GPIO_GETH_SW_DATA (1 << (31 - GPIO_GETH_SW_PIN))
+
+#define GPIO_SLIC_PORT 1
+#define GPIO_SLIC_PIN 30
+#define GPIO_SLIC_DATA (1 << (31 - GPIO_SLIC_PIN))
+
+
+#if defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB)
+#define PCA_IOPORT_I2C_ADDR 0x23
+#define PCA_IOPORT_OUTPUT_CMD 0x2
+#define PCA_IOPORT_CFG_CMD 0x6
+#define PCA_IOPORT_QE_PIN_ENABLE 0xf8
+#define PCA_IOPORT_QE_TDM_ENABLE 0xf6
+#endif
+
+const qe_iop_conf_t qe_iop_conf_tab[] = {
+ /* GPIO */
+ {1, 1, 2, 0, 0}, /* GPIO7/PB1 - LOAD_DEFAULT_N */
+#if 0
+ {1, 8, 1, 1, 0}, /* GPIO10/PB8 - DDR_RST */
+#endif
+ {0, 15, 1, 0, 0}, /* GPIO11/A15 - WDI */
+ {GPIO_GETH_SW_PORT, GPIO_GETH_SW_PIN, 1, 0, 0}, /* RST_GETH_SW_N */
+ {GPIO_SLIC_PORT, GPIO_SLIC_PIN, 1, 0, 0}, /* RST_SLIC_N */
+
+#ifdef CONFIG_P1025RDB
+ /* QE_MUX_MDC */
+ {1, 19, 1, 0, 1}, /* QE_MUX_MDC */
+
+ /* QE_MUX_MDIO */
+ {1, 20, 3, 0, 1}, /* QE_MUX_MDIO */
+
+ /* UCC_1_MII */
+ {0, 23, 2, 0, 2}, /* CLK12 */
+ {0, 24, 2, 0, 1}, /* CLK9 */
+ {0, 7, 1, 0, 2}, /* ENET1_TXD0_SER1_TXD0 */
+ {0, 9, 1, 0, 2}, /* ENET1_TXD1_SER1_TXD1 */
+ {0, 11, 1, 0, 2}, /* ENET1_TXD2_SER1_TXD2 */
+ {0, 12, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */
+ {0, 6, 2, 0, 2}, /* ENET1_RXD0_SER1_RXD0 */
+ {0, 10, 2, 0, 2}, /* ENET1_RXD1_SER1_RXD1 */
+ {0, 14, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */
+ {0, 15, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */
+ {0, 5, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
+ {0, 13, 1, 0, 2}, /* ENET1_TX_ER */
+ {0, 4, 2, 0, 2}, /* ENET1_RX_DV_SER1_CTS_B */
+ {0, 8, 2, 0, 2}, /* ENET1_RX_ER_SER1_CD_B */
+ {0, 17, 2, 0, 2}, /* ENET1_CRS */
+ {0, 16, 2, 0, 2}, /* ENET1_COL */
+
+ /* UCC_5_RMII */
+ {1, 11, 2, 0, 1}, /* CLK13 */
+ {1, 7, 1, 0, 2}, /* ENET5_TXD0_SER5_TXD0 */
+ {1, 10, 1, 0, 2}, /* ENET5_TXD1_SER5_TXD1 */
+ {1, 6, 2, 0, 2}, /* ENET5_RXD0_SER5_RXD0 */
+ {1, 9, 2, 0, 2}, /* ENET5_RXD1_SER5_RXD1 */
+ {1, 5, 1, 0, 2}, /* ENET5_TX_EN_SER5_RTS_B */
+ {1, 4, 2, 0, 2}, /* ENET5_RX_DV_SER5_CTS_B */
+ {1, 8, 2, 0, 2}, /* ENET5_RX_ER_SER5_CD_B */
+#endif
+
+ {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */
+};
+#endif
+
+struct cpld_data {
+ u8 cpld_rev_major;
+ u8 pcba_rev;
+ u8 wd_cfg;
+ u8 rst_bps_sw;
+ u8 load_default_n;
+ u8 rst_bps_wd;
+ u8 bypass_enable;
+ u8 bps_led;
+ u8 status_led; /* offset: 0x8 */
+ u8 fxo_led; /* offset: 0x9 */
+ u8 fxs_led; /* offset: 0xa */
+ u8 rev4[2];
+ u8 system_rst; /* offset: 0xd */
+ u8 bps_out;
+ u8 rev5[3];
+ u8 cpld_rev_minor;
+};
+
+#define CPLD_WD_CFG 0x03
+#define CPLD_RST_BSW 0x00
+#define CPLD_RST_BWD 0x00
+#define CPLD_BYPASS_EN 0x03
+#define CPLD_STATUS_LED 0x01
+#define CPLD_FXO_LED 0x01
+#define CPLD_FXS_LED 0x0F
+#define CPLD_SYS_RST 0x00
+
+void board_cpld_init(void)
+{
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+ out_8(&cpld_data->wd_cfg, CPLD_WD_CFG);
+ out_8(&cpld_data->status_led, CPLD_STATUS_LED);
+ out_8(&cpld_data->fxo_led, CPLD_FXO_LED);
+ out_8(&cpld_data->fxs_led, CPLD_FXS_LED);
+ out_8(&cpld_data->system_rst, CPLD_SYS_RST);
+}
+
+void board_gpio_init(void)
+{
+#ifdef CONFIG_QE
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ par_io_t *par_io = (par_io_t *) &(gur->qe_par_io);
+
+ /* Enable VSC7385 switch */
+ setbits_be32(&par_io[GPIO_GETH_SW_PORT].cpdat, GPIO_GETH_SW_DATA);
+
+ /* Enable SLIC */
+ setbits_be32(&par_io[GPIO_SLIC_PORT].cpdat, GPIO_SLIC_DATA);
+#else
+
+ ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+
+ /*
+ * GPIO10 DDR Reset, open drain
+ * GPIO7 LOAD_DEFAULT_N Input
+ * GPIO11 WDI (watchdog input)
+ * GPIO12 Ethernet Switch Reset
+ * GPIO13 SLIC Reset
+ */
+
+ setbits_be32(&pgpio->gpdir, 0x02130000);
+#ifndef CONFIG_SYS_RAMBOOT
+ /* init DDR3 reset signal */
+ setbits_be32(&pgpio->gpdir, 0x00200000);
+ setbits_be32(&pgpio->gpodr, 0x00200000);
+ clrbits_be32(&pgpio->gpdat, 0x00200000);
+ udelay(1000);
+ setbits_be32(&pgpio->gpdat, 0x00200000);
+ udelay(1000);
+ clrbits_be32(&pgpio->gpdir, 0x00200000);
+#endif
+
+#ifdef CONFIG_VSC7385_ENET
+ /* reset VSC7385 Switch */
+ setbits_be32(&pgpio->gpdir, 0x00080000);
+ setbits_be32(&pgpio->gpdat, 0x00080000);
+#endif
+
+#ifdef CONFIG_SLIC
+ /* reset SLIC */
+ setbits_be32(&pgpio->gpdir, 0x00040000);
+ setbits_be32(&pgpio->gpdat, 0x00040000);
+#endif
+#endif
+}
+
+int board_early_init_f(void)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ setbits_be32(&gur->pmuxcr,
+ (MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP));
+ clrbits_be32(&gur->sdhcdcr, SDHCDCR_CD_INV);
+
+ clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_ENA);
+
+ board_gpio_init();
+ board_cpld_init();
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u8 in, out, io_config, val;
+
+ printf("Board: %s ", CONFIG_BOARDNAME);
+
+#ifdef CONFIG_PHYS_64BIT
+ puts("(36-bit addrmap) ");
+#endif
+
+ printf("CPLD: V%d.%d PCBA: V%d.0\n",
+ in_8(&cpld_data->cpld_rev_major) & 0x0F,
+ in_8(&cpld_data->cpld_rev_minor) & 0x0F,
+ in_8(&cpld_data->pcba_rev) & 0x0F);
+
+ /* Initialize i2c early for rom_loc and flash bank information */
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0, 1, &in, 1) < 0 ||
+ i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 1, 1, &out, 1) < 0 ||
+ i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 3, 1, &io_config, 1) < 0) {
+ printf("Error reading i2c boot information!\n");
+ return 0; /* Don't want to hang() on this error */
+ }
+
+ val = (in & io_config) | (out & (~io_config));
+
+ puts("rom_loc: ");
+ if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_SD) {
+ puts("sd");
+#ifdef __SW_BOOT_SPI
+ } else if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_SPI) {
+ puts("spi");
+#endif
+#ifdef __SW_BOOT_NAND
+ } else if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_NAND) {
+ puts("nand");
+#endif
+#ifdef __SW_BOOT_PCIE
+ } else if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_PCIE) {
+ puts("pcie");
+#endif
+ } else {
+ if (val & 0x2)
+ puts("nor lower bank");
+ else
+ puts("nor upper bank");
+ }
+ puts("\n");
+
+ if (val & 0x1) {
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
+ puts("SD/MMC : 8-bit Mode\n");
+ puts("eSPI : Disabled\n");
+ } else {
+ puts("SD/MMC : 4-bit Mode\n");
+ puts("eSPI : Enabled\n");
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+ fsl_pcie_init_board(0);
+}
+#endif
+
+int board_early_init_r(void)
+{
+ const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+ /*
+ * Remap Boot flash region to caching-inhibited
+ * so that flash can be erased properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+
+ /* invalidate existing TLB entry for flash */
+ disable_tlb(flash_esel);
+
+ set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,/* perms, wimge */
+ 0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ struct fsl_pq_mdio_info mdio_info;
+ struct tsec_info_struct tsec_info[4];
+ ccsr_gur_t *gur __attribute__((unused)) =
+ (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ int num = 0;
+#ifdef CONFIG_VSC7385_ENET
+ char *tmp;
+ unsigned int vscfw_addr;
+#endif
+
+#ifdef CONFIG_TSEC1
+ SET_STD_TSEC_INFO(tsec_info[num], 1);
+ num++;
+#endif
+#ifdef CONFIG_TSEC2
+ SET_STD_TSEC_INFO(tsec_info[num], 2);
+ if (is_serdes_configured(SGMII_TSEC2)) {
+ printf("eTSEC2 is in sgmii mode.\n");
+ tsec_info[num].flags |= TSEC_SGMII;
+ }
+ num++;
+#endif
+#ifdef CONFIG_TSEC3
+ SET_STD_TSEC_INFO(tsec_info[num], 3);
+ num++;
+#endif
+
+ if (!num) {
+ printf("No TSECs initialized\n");
+ return 0;
+ }
+
+#ifdef CONFIG_VSC7385_ENET
+ /* If a VSC7385 microcode image is present, then upload it. */
+ if ((tmp = getenv("vscfw_addr")) != NULL) {
+ vscfw_addr = simple_strtoul(tmp, NULL, 16);
+ printf("uploading VSC7385 microcode from %x\n", vscfw_addr);
+ if (vsc7385_upload_firmware((void *) vscfw_addr,
+ CONFIG_VSC7385_IMAGE_SIZE))
+ puts("Failure uploading VSC7385 microcode.\n");
+ } else
+ puts("No address specified for VSC7385 microcode.\n");
+#endif
+
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+
+ fsl_pq_mdio_init(bis, &mdio_info);
+
+ tsec_eth_init(bis, tsec_info, num);
+
+#if defined(CONFIG_UEC_ETH)
+ /* QE0 and QE3 need to be exposed for UCC1 and UCC5 Eth mode */
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE0);
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE3);
+
+ uec_standard_init(bis);
+#endif
+
+ return pci_eth_init(bis);
+}
+
+#if defined(CONFIG_QE) && \
+ (defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB))
+static void fdt_board_fixup_qe_pins(void *blob)
+{
+ unsigned int oldbus;
+ u8 val8;
+ int node;
+ fsl_lbc_t *lbc = LBC_BASE_ADDR;
+
+ if (hwconfig("qe")) {
+ /* For QE and eLBC pins multiplexing,
+ * there is a PCA9555 device on P1025RDB.
+ * It control the multiplex pins' functions,
+ * and setting the PCA9555 can switch the
+ * function between QE and eLBC.
+ */
+ oldbus = i2c_get_bus_num();
+ i2c_set_bus_num(0);
+ if (hwconfig("tdm"))
+ val8 = PCA_IOPORT_QE_TDM_ENABLE;
+ else
+ val8 = PCA_IOPORT_QE_PIN_ENABLE;
+ i2c_write(PCA_IOPORT_I2C_ADDR, PCA_IOPORT_CFG_CMD,
+ 1, &val8, 1);
+ i2c_write(PCA_IOPORT_I2C_ADDR, PCA_IOPORT_OUTPUT_CMD,
+ 1, &val8, 1);
+ i2c_set_bus_num(oldbus);
+ /* if run QE TDM, Set ABSWP to implement
+ * conversion of addresses in the eLBC.
+ */
+ if (hwconfig("tdm")) {
+ set_lbc_or(2, CONFIG_PMC_OR_PRELIM);
+ set_lbc_br(2, CONFIG_PMC_BR_PRELIM);
+ setbits_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
+ }
+ } else {
+ node = fdt_path_offset(blob, "/qe");
+ if (node >= 0)
+ fdt_del_node(blob, node);
+ }
+
+ return;
+}
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ phys_addr_t base;
+ phys_size_t size;
+
+ ft_cpu_setup(blob, bd);
+
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+ FT_FSL_PCI_SETUP;
+
+#ifdef CONFIG_QE
+ do_fixup_by_compat(blob, "fsl,qe", "status", "okay",
+ sizeof("okay"), 0);
+#if defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB)
+ fdt_board_fixup_qe_pins(blob);
+#endif
+#endif
+ fdt_fixup_dr_usb(blob, bd);
+}
+#endif
diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c
new file mode 100644
index 000000000..6d2246387
--- /dev/null
+++ b/board/freescale/p1_p2_rdb_pc/tlb.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* TLB 1 */
+ /* *I*** - Covers boot page */
+ SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I,
+ 0, 0, BOOKE_PAGESZ_4K, 1),
+
+ /* *I*G* - CCSRBAR */
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_1M, 1),
+
+#ifndef CONFIG_NAND_SPL
+ /* W**G* - Flash/promjet, localbus */
+ /* This will be changed to *I*G* after relocation to RAM. */
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_64M, 1),
+
+#ifdef CONFIG_PCI
+ /* *I*G* - PCI memory 1.5G */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_1G, 1),
+
+ /* *I*G* - PCI I/O effective: 192K */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256K, 1),
+#endif
+
+#ifdef CONFIG_VSC7385_ENET
+ /* *I*G - VSC7385 Switch */
+ SET_TLB_ENTRY(1, CONFIG_SYS_VSC7385_BASE, CONFIG_SYS_VSC7385_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_1M, 1),
+#endif
+
+ SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_1M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_PMC_BASE, CONFIG_SYS_PMC_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 10, BOOKE_PAGESZ_64K, 1),
+#endif
+
+#ifdef CONFIG_SYS_NAND_BASE
+ /* *I*G - NAND */
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_1M, 1),
+#endif
+
+#ifdef CONFIG_SYS_RAMBOOT
+ /* *I*G - eSDHC/eSPI/NAND boot */
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 8, BOOKE_PAGESZ_1G, 1),
+
+#ifdef CONFIG_P1020MBG
+ /* 2G DDR on P1020MBG, map the second 1G */
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+ CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 9, BOOKE_PAGESZ_1G, 1),
+#endif
+#endif
+
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/p2041rdb/Makefile b/board/freescale/p2041rdb/Makefile
index 65f348fe3..8d4da3a38 100644
--- a/board/freescale/p2041rdb/Makefile
+++ b/board/freescale/p2041rdb/Makefile
@@ -29,9 +29,7 @@ LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += cpld.o
COBJS-y += ddr.o
-COBJS-y += law.o
-COBJS-y += tlb.o
-COBJS-$(CONFIG_PCI) += pci.o
+COBJS-y += eth.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/freescale/p2041rdb/cpld.c b/board/freescale/p2041rdb/cpld.c
index 8e1f46e79..a4bcc183e 100644
--- a/board/freescale/p2041rdb/cpld.c
+++ b/board/freescale/p2041rdb/cpld.c
@@ -53,7 +53,11 @@ void cpld_reset(void) __attribute__((weak, alias("__cpld_reset")));
*/
void __cpld_set_altbank(void)
{
+ u8 reg5 = CPLD_READ(sw_ctl_on);
+
+ CPLD_WRITE(sw_ctl_on, reg5 | CPLD_SWITCH_BANK_ENABLE);
CPLD_WRITE(fbank_sel, 1);
+ CPLD_WRITE(system_rst, 1);
}
void cpld_set_altbank(void)
__attribute__((weak, alias("__cpld_set_altbank")));
@@ -61,12 +65,12 @@ void cpld_set_altbank(void)
/**
* Set the boot bank to the default bank
*/
-void __cpld_clear_altbank(void)
+void __cpld_set_defbank(void)
{
- CPLD_WRITE(fbank_sel, 0);
+ CPLD_WRITE(system_rst_default, 1);
}
-void cpld_clear_altbank(void)
- __attribute__((weak, alias("__cpld_clear_altbank")));
+void cpld_set_defbank(void)
+ __attribute__((weak, alias("__cpld_set_defbank")));
#ifdef DEBUG
static void cpld_dump_regs(void)
@@ -75,7 +79,6 @@ static void cpld_dump_regs(void)
printf("cpld_ver_sub = 0x%02x\n", CPLD_READ(cpld_ver_sub));
printf("pcba_ver = 0x%02x\n", CPLD_READ(pcba_ver));
printf("system_rst = 0x%02x\n", CPLD_READ(system_rst));
- printf("wd_cfg = 0x%02x\n", CPLD_READ(wd_cfg));
printf("sw_ctl_on = 0x%02x\n", CPLD_READ(sw_ctl_on));
printf("por_cfg = 0x%02x\n", CPLD_READ(por_cfg));
printf("switch_strobe = 0x%02x\n", CPLD_READ(switch_strobe));
@@ -92,7 +95,6 @@ static void cpld_dump_regs(void)
int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int rc = 0;
- unsigned int i;
if (argc <= 1)
return cmd_usage(cmdtp);
@@ -101,16 +103,7 @@ int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if (strcmp(argv[2], "altbank") == 0)
cpld_set_altbank();
else
- cpld_clear_altbank();
-
- cpld_reset();
- } else if (strcmp(argv[1], "watchdog") == 0) {
- static char *period[8] = {"1ms", "10ms", "30ms", "disable",
- "100ms", "1s", "10s", "60s"};
- for (i = 0; i < ARRAY_SIZE(period); i++) {
- if (strcmp(argv[2], period[i]) == 0)
- CPLD_WRITE(wd_cfg, i);
- }
+ cpld_set_defbank();
} else if (strcmp(argv[1], "lane_mux") == 0) {
u32 lane = simple_strtoul(argv[2], NULL, 16);
u8 val = (u8)simple_strtoul(argv[3], NULL, 16);
@@ -154,17 +147,15 @@ U_BOOT_CMD(
"Reset the board or pin mulexing selection using the CPLD sequencer",
"reset - hard reset to default bank\n"
"cpld_cmd reset altbank - reset to alternate bank\n"
- "cpld_cmd watchdog <watchdog_period> - set the watchdog period\n"
- " period: 1ms 10ms 30ms 100ms 1s 10s 60s disable\n"
"cpld_cmd lane_mux <lane> <mux_value> - set multiplexed lane pin\n"
- " lane 6: 0 -> slot1 (Default)\n"
- " 1 -> SGMII\n"
- " lane a: 0 -> slot2 (Default)\n"
- " 1 -> AURORA\n"
- " lane c: 0 -> slot2 (Default)\n"
- " 1 -> SATA0\n"
- " lane d: 0 -> slot2 (Default)\n"
- " 1 -> SATA1\n"
+ " lane 6: 0 -> slot1\n"
+ " 1 -> SGMII (Default)\n"
+ " lane a: 0 -> slot2\n"
+ " 1 -> AURORA (Default)\n"
+ " lane c: 0 -> slot2\n"
+ " 1 -> SATA0 (Default)\n"
+ " lane d: 0 -> slot2\n"
+ " 1 -> SATA1 (Default)\n"
#ifdef DEBUG
"cpld_cmd dump - display the CPLD registers\n"
#endif
diff --git a/board/freescale/p2041rdb/cpld.h b/board/freescale/p2041rdb/cpld.h
index 3b24cb048..2e3e7b113 100644
--- a/board/freescale/p2041rdb/cpld.h
+++ b/board/freescale/p2041rdb/cpld.h
@@ -19,7 +19,7 @@ typedef struct cpld_data {
u8 cpld_ver_sub; /* 0x1 - CPLD Minor Revision Register */
u8 pcba_ver; /* 0x2 - PCBA Revision Register */
u8 system_rst; /* 0x3 - system reset register */
- u8 wd_cfg; /* 0x4 - Watchdog Period Setting Register */
+ u8 res0; /* 0x4 - not used */
u8 sw_ctl_on; /* 0x5 - Switch Control Enable Register */
u8 por_cfg; /* 0x6 - POR Control Register */
u8 switch_strobe; /* 0x7 - Multiplexed pin Select Register */
@@ -29,6 +29,8 @@ typedef struct cpld_data {
u8 fbank_sel; /* 0xb - Flash bank selection */
u8 serdes_mux; /* 0xc - Multiplexed pin Select Register */
u8 sw[1]; /* 0xd - SW2 Status */
+ u8 system_rst_default; /* 0xe - system reset to default register */
+ u8 sysclk_sw1; /* 0xf - sysclk configuration register */
} __attribute__ ((packed)) cpld_data_t;
#define SERDES_MUX_LANE_6_MASK 0x2
@@ -39,6 +41,9 @@ typedef struct cpld_data {
#define SERDES_MUX_LANE_C_SHIFT 2
#define SERDES_MUX_LANE_D_MASK 0x8
#define SERDES_MUX_LANE_D_SHIFT 3
+#define CPLD_SWITCH_BANK_ENABLE 0x40
+#define CPLD_SYSCLK_83 0x1 /* system clock 83.3MHz */
+#define CPLD_SYSCLK_100 0x2 /* system clock 100MHz */
/* Pointer to the CPLD register set */
#define cpld ((cpld_data_t *)CPLD_BASE)
diff --git a/board/freescale/p2041rdb/ddr.c b/board/freescale/p2041rdb/ddr.c
index e9c699c41..36370933b 100644
--- a/board/freescale/p2041rdb/ddr.c
+++ b/board/freescale/p2041rdb/ddr.c
@@ -37,7 +37,10 @@ const board_specific_parameters_t board_specific_parameters[] = {
* lo| hi| num| clk| wrlvl | cpo |wrdata|2T
* mhz| mhz|ranks|adjst| start | delay|
*/
- { 1017, 1116, 2, 4, 6, 0xff, 2, 0},
+ { 0, 750, 2, 3, 5, 0xff, 2, 0},
+ { 751, 1250, 2, 4, 6, 0xff, 2, 0},
+ { 1251, 1350, 2, 5, 7, 0xff, 2, 0},
+ { 1351, 1666, 2, 5, 8, 0xff, 2, 0},
};
void fsl_ddr_board_options(memctl_options_t *popts,
diff --git a/board/freescale/p2041rdb/eth.c b/board/freescale/p2041rdb/eth.c
new file mode 100644
index 000000000..0a1dfa7cc
--- /dev/null
+++ b/board/freescale/p2041rdb/eth.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Author: Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * The RGMII PHYs are provided by the two on-board PHY. The SGMII PHYs
+ * are provided by the three on-board PHY or by the standard Freescale
+ * four-port SGMII riser card. We need to change the phy-handle in the
+ * kernel dts file to point to the correct PHY according to serdes mux
+ * and serdes protocol selection.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/fsl_serdes.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <asm/fsl_dtsec.h>
+
+#include "cpld.h"
+#include "../common/fman.h"
+
+#ifdef CONFIG_FMAN_ENET
+/*
+ * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
+ * that the mapping must be determined dynamically, or that the lane maps to
+ * something other than a board slot
+ */
+static u8 lane_to_slot[] = {
+ 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 2, 2, 2, 2, 0, 0, 0, 0
+};
+
+static int riser_phy_addr[] = {
+ CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR,
+ CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR,
+ CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR,
+ CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR,
+};
+
+/*
+ * Initialize the lane_to_slot[] array.
+ *
+ * On the P2040RDB board the mapping is controlled by CPLD register.
+ */
+static void initialize_lane_to_slot(void)
+{
+ u8 mux = CPLD_READ(serdes_mux);
+
+ lane_to_slot[6] = (mux & SERDES_MUX_LANE_6_MASK) ? 0 : 1;
+ lane_to_slot[10] = (mux & SERDES_MUX_LANE_A_MASK) ? 0 : 2;
+ lane_to_slot[12] = (mux & SERDES_MUX_LANE_C_MASK) ? 0 : 2;
+ lane_to_slot[13] = (mux & SERDES_MUX_LANE_D_MASK) ? 0 : 2;
+}
+
+/*
+ * Given the following ...
+ *
+ * 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
+ * compatible string and 'addr' physical address)
+ *
+ * 2) An Fman port
+ *
+ * ... update the phy-handle property of the Ethernet node to point to the
+ * right PHY. This assumes that we already know the PHY for each port.
+ *
+ * The offset of the Fman Ethernet node is also passed in for convenience, but
+ * it is not used, and we recalculate the offset anyway.
+ *
+ * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC.
+ * Inside the Fman, "ports" are things that connect to MACs. We only call them
+ * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs
+ * and ports are the same thing.
+ *
+ */
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+ enum fm_port port, int offset)
+{
+ phy_interface_t intf = fm_info_get_enet_if(port);
+ char phy[16];
+
+ /* The RGMII PHY is identified by the MAC connected to it */
+ if (intf == PHY_INTERFACE_MODE_RGMII) {
+ sprintf(phy, "phy_rgmii_%u", port == FM1_DTSEC5 ? 0 : 1);
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ }
+
+ /* The SGMII PHY is identified by the MAC connected to it */
+ if (intf == PHY_INTERFACE_MODE_SGMII) {
+ int lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + port);
+ u8 slot;
+ if (lane < 0)
+ return;
+ slot = lane_to_slot[lane];
+ if (slot) {
+ sprintf(phy, "phy_sgmii_%x",
+ CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR
+ + (port - FM1_DTSEC1));
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ } else {
+ sprintf(phy, "phy_sgmii_%x",
+ CONFIG_SYS_FM1_DTSEC1_PHY_ADDR
+ + (port - FM1_DTSEC1));
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ }
+ }
+
+ if (intf == PHY_INTERFACE_MODE_XGMII) {
+ /* XAUI */
+ int lane = serdes_get_first_lane(XAUI_FM1);
+ if (lane >= 0) {
+ /* The XAUI PHY is identified by the slot */
+ sprintf(phy, "phy_xgmii_%u", lane_to_slot[lane]);
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ }
+ }
+}
+#endif /* #ifdef CONFIG_FMAN_ENET */
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+ struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
+ struct fsl_pq_mdio_info dtsec_mdio_info;
+ struct tgec_mdio_info tgec_mdio_info;
+ unsigned int i, slot;
+ int lane;
+
+ printf("Initializing Fman\n");
+
+ initialize_lane_to_slot();
+
+ /*
+ * Set TBIPA on FM1@DTSEC1. This is needed for configurations
+ * where FM1@DTSEC1 isn't used directly, since it provides
+ * MDIO for other ports.
+ */
+ out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
+
+ dtsec_mdio_info.regs =
+ (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the real 1G MDIO bus */
+ fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+ tgec_mdio_info.regs =
+ (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+ tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+ /* Register the real 10G MDIO bus */
+ fm_tgec_mdio_init(bis, &tgec_mdio_info);
+
+ /*
+ * Program the three on-board SGMII PHY addresses. If the SGMII Riser
+ * card used, we'll override the PHY address later. For any DTSEC that
+ * is RGMII, we'll also override its PHY address later. We assume that
+ * DTSEC4 and DTSEC5 are used for RGMII.
+ */
+ fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ int idx = i - FM1_DTSEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot[lane];
+ if (slot)
+ fm_info_set_phy_address(i, riser_phy_addr[i]);
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /* Only DTSEC4 and DTSEC5 can be routed to RGMII */
+ fm_info_set_phy_address(i, i == FM1_DTSEC5 ?
+ CONFIG_SYS_FM1_DTSEC5_PHY_ADDR :
+ CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
+ break;
+ default:
+ printf("Fman1: DTSEC%u set to unknown interface %i\n",
+ idx + 1, fm_info_get_enet_if(i));
+ break;
+ }
+
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+ }
+
+ lane = serdes_get_first_lane(XAUI_FM1);
+ if (lane >= 0) {
+ slot = lane_to_slot[lane];
+ if (slot)
+ fm_info_set_phy_address(FM1_10GEC1,
+ CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+ }
+
+ fm_info_set_mdio(FM1_10GEC1,
+ miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
+ cpu_eth_init(bis);
+#endif
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index 52269d3ce..6461bd7dd 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -32,6 +32,7 @@
#include <asm/fsl_serdes.h>
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
extern void pci_of_setup(void *blob, bd_t *bd);
@@ -129,6 +130,20 @@ int board_early_init_r(void)
return 0;
}
+unsigned long get_board_sys_clk(unsigned long dummy)
+{
+ u8 sysclk_conf = CPLD_READ(sysclk_sw1);
+
+ switch (sysclk_conf & 0x7) {
+ case CPLD_SYSCLK_83:
+ return 83333333;
+ case CPLD_SYSCLK_100:
+ return 100000000;
+ default:
+ return 66666666;
+ }
+}
+
static const char *serdes_clock_to_string(u32 clock)
{
switch (clock) {
@@ -200,4 +215,7 @@ void ft_board_setup(void *blob, bd_t *bd)
#endif
fdt_fixup_liodn(blob);
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_ethernet(blob);
+#endif
}
diff --git a/board/freescale/p2041rdb/tlb.c b/board/freescale/p2041rdb/tlb.c
deleted file mode 100644
index 43f28ed14..000000000
--- a/board/freescale/p2041rdb/tlb.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
- /* TLB 0 - for temp stack in cache */
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
- SET_TLB_ENTRY(0, CPLD_BASE, CPLD_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
- /* TLB 1 */
- /* *I*** - Covers boot page */
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
- /*
- * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
- * SRAM is at 0xfff00000, it covered the 0xfffff000.
- */
- SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_1M, 1),
-#else
- SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_4K, 1),
-#endif
-
- /* *I*G* - CCSRBAR */
- SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 1, BOOKE_PAGESZ_16M, 1),
-
- /* *I*G* - Flash, localbus */
- /* This will be changed to *I*G* after relocation to RAM. */
- SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
- 0, 2, BOOKE_PAGESZ_256M, 1),
-
- /* *I*G* - PCI */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 3, BOOKE_PAGESZ_1G, 1),
-
- /* *I*G* - PCI */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000,
- CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000,
- CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 5, BOOKE_PAGESZ_256M, 1),
-
- /* *I*G* - PCI I/O */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 6, BOOKE_PAGESZ_256K, 1),
-
- /* Bman/Qman */
- SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 9, BOOKE_PAGESZ_1M, 1),
- SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000,
- CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 10, BOOKE_PAGESZ_1M, 1),
- SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 11, BOOKE_PAGESZ_1M, 1),
- SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000,
- CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 12, BOOKE_PAGESZ_1M, 1),
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 13, BOOKE_PAGESZ_4M, 1),
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/boards.cfg b/boards.cfg
index e5cb91b4c..325470285 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -568,6 +568,20 @@ MPC8569MDS_NAND powerpc mpc85xx mpc8569mds freesca
MPC8572DS powerpc mpc85xx mpc8572ds freescale - MPC8572DS
MPC8572DS_36BIT powerpc mpc85xx mpc8572ds freescale - MPC8572DS:36BIT
MPC8572DS_NAND powerpc mpc85xx mpc8572ds freescale - MPC8572DS:NAND
+P1010RDB_NOR powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB
+P1010RDB_NOR_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SECURE_BOOT
+P1010RDB_36BIT_NOR powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT
+P1010RDB_36BIT_NOR_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SECURE_BOOT
+P1010RDB_NAND powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,NAND
+P1010RDB_NAND_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,NAND_SECBOOT,SECURE_BOOT
+P1010RDB_36BIT_NAND powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND
+P1010RDB_36BIT_NAND_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND_SECBOOT,SECURE_BOOT
+P1010RDB_SDCARD powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SDCARD
+P1010RDB_SPIFLASH powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SPIFLASH
+P1010RDB_SPIFLASH_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SPIFLASH,SECURE_BOOT
+P1010RDB_36BIT_SDCARD powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SDCARD
+P1010RDB_36BIT_SPIFLASH powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SPIFLASH
+P1010RDB_36BIT_SPIFLASH_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SPIFLASH,SECURE_BOOT
P1011RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB
P1011RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT
P1011RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT,SDCARD
@@ -575,6 +589,10 @@ P1011RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freesca
P1011RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,NAND
P1011RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,SDCARD
P1011RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,SPIFLASH
+P1020MBG-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG
+P1020MBG-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG,36BIT
+P1020MBG-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG,SDCARD
+P1020MBG-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG,SDCARD,36BIT
P1020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB
P1020RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT
P1020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SDCARD
@@ -582,10 +600,40 @@ P1020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freesca
P1020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,NAND
P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD
P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SPIFLASH
+P1020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB
+P1020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,NAND
+P1020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SDCARD
+P1020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SPIFLASH
+P1020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT
+P1020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,NAND
+P1020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SDCARD
+P1020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SPIFLASH
+P1020UTM-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM
+P1020UTM-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,SDCARD
+P1020UTM-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT
+P1020UTM-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT,SDCARD
+P1021RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB
+P1021RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,NAND
+P1021RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SDCARD
+P1021RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SPIFLASH
+P1021RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT
+P1021RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT,NAND
+P1021RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT,SDCARD
+P1021RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT,SPIFLASH
P1022DS powerpc mpc85xx p1022ds freescale
P1022DS_36BIT powerpc mpc85xx p1022ds freescale - P1022DS:36BIT
P1023RDS powerpc mpc85xx p1023rds freescale - P1023RDS
P1023RDS_NAND powerpc mpc85xx p1023rds freescale - P1023RDS:NAND
+P1024RDB powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1024RDB
+P1024RDB_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1024RDB,36BIT
+P1024RDB_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1024RDB,NAND
+P1024RDB_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1024RDB,SDCARD
+P1024RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1024RDB,SPIFLASH
+P1025RDB powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB
+P1025RDB_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,36BIT
+P1025RDB_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,NAND
+P1025RDB_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,SDCARD
+P1025RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,SPIFLASH
P2010RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB
P2010RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT
P2010RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT,SDCARD
@@ -605,19 +653,30 @@ P2020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freesca
P2020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,NAND
P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SDCARD
P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SPIFLASH
+P2020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB
+P2020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,NAND
+P2020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,SDCARD
+P2020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,SPIFLASH
+P2020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT
+P2020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT,NAND
+P2020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT,SDCARD
+P2020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT,SPIFLASH
P2041RDB powerpc mpc85xx p2041rdb freescale
P2041RDB_SDCARD powerpc mpc85xx p2041rdb freescale - P2041RDB:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
P2041RDB_SPIFLASH powerpc mpc85xx p2041rdb freescale - P2041RDB:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
P3041DS powerpc mpc85xx corenet_ds freescale
P3041DS_NAND powerpc mpc85xx corenet_ds freescale - P3041DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
P3041DS_SDCARD powerpc mpc85xx corenet_ds freescale - P3041DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
+P3041DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P3041DS:SECURE_BOOT
P3041DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P3041DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
P4080DS powerpc mpc85xx corenet_ds freescale
P4080DS_SDCARD powerpc mpc85xx corenet_ds freescale - P4080DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
+P4080DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P4080DS:SECURE_BOOT
P4080DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P4080DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
P5020DS powerpc mpc85xx corenet_ds freescale
P5020DS_NAND powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
P5020DS_SDCARD powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
+P5020DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P5020DS:SECURE_BOOT
P5020DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
mpq101 powerpc mpc85xx mpq101 mercury - mpq101
stxgp3 powerpc mpc85xx stxgp3 stx
diff --git a/common/Makefile b/common/Makefile
index 2edbd7147..371a0d99b 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -162,7 +162,13 @@ COBJS-$(CONFIG_CMD_XIMG) += cmd_ximg.o
COBJS-$(CONFIG_YAFFS2) += cmd_yaffs2.o
# others
-COBJS-$(CONFIG_DDR_SPD) += ddr_spd.o
+ifdef CONFIG_DDR_SPD
+SPD := y
+endif
+ifdef CONFIG_SPD_EEPROM
+SPD := y
+endif
+COBJS-$(SPD) += ddr_spd.o
COBJS-$(CONFIG_HWCONFIG) += hwconfig.o
COBJS-$(CONFIG_CONSOLE_MUX) += iomux.o
COBJS-y += flash.o
diff --git a/common/cmd_mp.c b/common/cmd_mp.c
index f19bf41f8..b115b5913 100644
--- a/common/cmd_mp.c
+++ b/common/cmd_mp.c
@@ -32,9 +32,8 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return cmd_usage(cmdtp);
cpuid = simple_strtoul(argv[1], NULL, 10);
- if (cpuid >= cpu_numcores()) {
- printf ("Core num: %lu is out of range[0..%d]\n",
- cpuid, cpu_numcores() - 1);
+ if (!is_core_valid(cpuid)) {
+ printf ("Core num: %lu is not valid\n", cpuid);
return 1;
}
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 19b2ef6ea..46aa84220 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -1196,13 +1196,13 @@ int fdt_alloc_phandle(void *blob)
}
/*
- * fdt_create_phandle: Create a phandle property for the given node
+ * fdt_set_phandle: Create a phandle property for the given node
*
* @fdt: ptr to device tree
* @nodeoffset: node to update
* @phandle: phandle value to set (must be unique)
-*/
-int fdt_create_phandle(void *fdt, int nodeoffset, uint32_t phandle)
+ */
+int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle)
{
int ret;
@@ -1235,6 +1235,26 @@ int fdt_create_phandle(void *fdt, int nodeoffset, uint32_t phandle)
return ret;
}
+/*
+ * fdt_create_phandle: Create a phandle property for the given node
+ *
+ * @fdt: ptr to device tree
+ * @nodeoffset: node to update
+ */
+int fdt_create_phandle(void *fdt, int nodeoffset)
+{
+ /* see if there is a phandle already */
+ int phandle = fdt_get_phandle(fdt, nodeoffset);
+
+ /* if we got 0, means no phandle so create one */
+ if (phandle == 0) {
+ phandle = fdt_alloc_phandle(fdt);
+ fdt_set_phandle(fdt, nodeoffset, phandle);
+ }
+
+ return phandle;
+}
+
#if defined(CONFIG_VIDEO)
int fdt_add_edid(void *blob, const char *compat, unsigned char *edid_buf)
{
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
index c1ee0a68a..abfb7f192 100644
--- a/doc/README.fsl-ddr
+++ b/doc/README.fsl-ddr
@@ -170,3 +170,55 @@ Single slot system
Reference http://www.xrosstalkmag.com/mag_issues/xrosstalk_oct08_final.pdf
http://download.micron.com/pdf/technotes/ddr3/tn4108_ddr3_design_guide.pdf
+
+
+Table for ODT for DDR2
+======================
+Two slots system
++-----------------------+----------+---------------+-----------------------------+-----------------------------+
+| Configuration | |DRAM controller| Slot 1 | Slot 2 |
++-----------+-----------+----------+-------+-------+--------------+--------------+--------------+--------------+
+| | | | | | Rank 1 | Rank 2 | Rank 1 | Rank 2 |
++ Slot 1 | Slot 2 |Write/Read| Write | Read |-------+------+-------+------+-------+------+-------+------+
+| | | | | | Write | Read | Write | Read | Write | Read | Write | Read |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 150 | off | off | off | off | 75 | 75 | off | off |
+| Dual Rank | Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 150 | 75 | 75 | off | off | off | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 150 | off | off | off | off | 75 | 75 | | |
+| Dual Rank |Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 150 | 75 | 75 | off | off | off | off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 150 | off | off | | | 75 | 75 | off | off |
+|Single Rank| Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 150 | 75 | 75 | | | off | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 150 | off | off | | | 75 | 75 | | |
+|Single Rank|Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 150 | 75 | 75 | | | off | off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Dual Rank | Empty | Slot 1 | off | 75 | 150 | off | off | off | | | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Empty | Dual Rank | Slot 2 | off | 75 | | | | | 150 | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|Single Rank| Empty | Slot 1 | off | 75 | 150 | off | | | | | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Empty |Single Rank| Slot 2 | off | 75 | | | | | 150 | off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+
+Single slot system
++-------------+------------+---------------+-----------------------------+
+| | |DRAM controller| Rank 1 | Rank 2 |
+|Configuration| Write/Read |-------+-------+-------+------+-------+------+
+| | | Write | Read | Write | Read | Write | Read |
++-------------+------------+-------+-------+-------+------+-------+------+
+| | R1 | off | 75 | 150 | off | off | off |
+| Dual Rank |------------+-------+-------+-------+------+-------+------+
+| | R2 | off | 75 | 150 | off | off | off |
++-------------+------------+-------+-------+-------+------+-------+------+
+| Single Rank | R1 | off | 75 | 150 | off |
++-------------+------------+-------+-------+-------+------+
+
+Reference http://www.samsung.com/global/business/semiconductor/products/dram/downloads/applicationnote/ddr2_odt_control_200603.pdf
+
diff --git a/doc/README.p1_p2_rdb_pc b/doc/README.p1_p2_rdb_pc
new file mode 100644
index 000000000..44377317d
--- /dev/null
+++ b/doc/README.p1_p2_rdb_pc
@@ -0,0 +1,46 @@
+Overview
+--------
+P1_P2_RDB_PC represents a set of boards including
+ P1020MSBG-PC
+ P1020RDB-PC
+ P1020UTM-PC
+ P1021RDB-PC
+ P1024RDB
+ P1025RDB
+ P2020RDB-PC
+
+They have similar design of P1020RDB but have DDR3 instead of DDR2. P2020RDB-PC
+has 64-bit DDR. All others have 32-bit DDR.
+
+Key features on these boards include:
+ * DDR3
+ * NOR flash
+ * NAND flash (on RDB's only)
+ * SPI flash (on RDB's only)
+ * SDHC/MMC card slot
+ * VSC7385 Ethernet switch (on P1020MBG, P1020RDB, & P1021RDB)
+ * PCIE slot and mini-PCIE slots
+
+As these boards use soldered DDR chips not regular DIMMs, an on-board EEPROM
+is used to store SPD data. In case of absent or corrupted SPD, falling back
+to timing data embedded in the source code will be used. Raw timing data is
+extracted from DDR chip datasheet. Different speeds of DDR are supported with
+this approach. ODT option is forced to fit this set of boards, again because
+they don't have regular DIMMs.
+
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS is defined as 5ms to meet specification
+for writing timing.
+
+VSC firmware Address is defined by default in config file for eTSEC1.
+
+SD width is based off DIP switch. DIP switch is detected on the
+board by reading i2c bus and setting the appropriate mux values.
+
+Some boards have QE module in the silicon (P1021 and P1025). QE and eLBC have
+pins multiplexing. QE function needs to be disabled to access Nor Flash and
+CPLD. QE-UEC and QE-UART can be enabled for linux kernel by setting "qe"
+in hwconfig. In addition, QE-UEC and QE-TDM also have pins multiplexing, to
+enable QE-TDM for linux kernel, set "qe;tdm" in hwconfig. Syntax is as below
+
+'setenv hwconfig qe' to enable QE UEC/UART and disable Nor-Flash/CPLD.
+'setenv hwconfig 'qe;tdm'' to enalbe QE TDM and disable Nor-Flash/CPLD.
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index b6a788638..dae244299 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -43,6 +43,7 @@ COBJS-$(CONFIG_NAND_ATMEL) += atmel_nand.o
COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o
COBJS-$(CONFIG_NAND_DAVINCI) += davinci_nand.o
COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
+COBJS-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
COBJS-$(CONFIG_NAND_KB9202) += kb9202_nand.o
COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
new file mode 100644
index 000000000..b3f3c3c05
--- /dev/null
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -0,0 +1,850 @@
+/* Integrated Flash Controller NAND Machine Driver
+ *
+ * Copyright (c) 2011 Freescale Semiconductor, Inc
+ *
+ * Authors: Dipen Dudhat <Dipen.Dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/fsl_ifc.h>
+
+#define MAX_BANKS 4
+#define ERR_BYTE 0xFF /* Value returned for read bytes
+ when read failed */
+#define IFC_TIMEOUT_MSECS 10 /* Maximum number of mSecs to wait for IFC
+ NAND Machine */
+
+struct fsl_ifc_ctrl;
+
+/* mtd information per set */
+struct fsl_ifc_mtd {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ struct fsl_ifc_ctrl *ctrl;
+
+ struct device *dev;
+ int bank; /* Chip select bank number */
+ unsigned int bufnum_mask; /* bufnum = page & bufnum_mask */
+ u8 __iomem *vbase; /* Chip select base virtual address */
+};
+
+/* overview of the fsl ifc controller */
+struct fsl_ifc_ctrl {
+ struct nand_hw_control controller;
+ struct fsl_ifc_mtd *chips[MAX_BANKS];
+
+ /* device info */
+ struct fsl_ifc *regs;
+ uint8_t __iomem *addr; /* Address of assigned IFC buffer */
+ unsigned int cs_nand; /* On which chipsel NAND is connected */
+ unsigned int page; /* Last page written to / read from */
+ unsigned int read_bytes; /* Number of bytes read during command */
+ unsigned int column; /* Saved column from SEQIN */
+ unsigned int index; /* Pointer to next byte to 'read' */
+ unsigned int status; /* status read from NEESR after last op */
+ unsigned int oob; /* Non zero if operating on OOB data */
+ unsigned int eccread; /* Non zero for a full-page ECC read */
+};
+
+static struct fsl_ifc_ctrl *ifc_ctrl;
+
+/* 512-byte page with 4-bit ECC, 8-bit */
+static struct nand_ecclayout oob_512_8bit_ecc4 = {
+ .eccbytes = 8,
+ .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
+ .oobfree = { {0, 5}, {6, 2} },
+};
+
+/* 512-byte page with 4-bit ECC, 16-bit */
+static struct nand_ecclayout oob_512_16bit_ecc4 = {
+ .eccbytes = 8,
+ .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
+ .oobfree = { {2, 6}, },
+};
+
+/* 2048-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_2048_ecc4 = {
+ .eccbytes = 32,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ },
+ .oobfree = { {2, 6}, {40, 24} },
+};
+
+/* 4096-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_4096_ecc4 = {
+ .eccbytes = 64,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ },
+ .oobfree = { {2, 6}, {72, 56} },
+};
+
+/* 4096-byte page size with 8-bit ECC -- requires 218-byte OOB */
+static struct nand_ecclayout oob_4096_ecc8 = {
+ .eccbytes = 128,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ 72, 73, 74, 75, 76, 77, 78, 79,
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127,
+ 128, 129, 130, 131, 132, 133, 134, 135,
+ },
+ .oobfree = { {2, 6}, {136, 82} },
+};
+
+
+/*
+ * Generic flash bbt descriptors
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 2, /* 0 on 8-bit small page */
+ .len = 4,
+ .veroffs = 6,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 2, /* 0 on 8-bit small page */
+ .len = 4,
+ .veroffs = 6,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
+};
+
+/*
+ * Set up the IFC hardware block and page address fields, and the ifc nand
+ * structure addr field to point to the correct IFC buffer in memory
+ */
+static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc *ifc = ctrl->regs;
+ int buf_num;
+
+ ctrl->page = page_addr;
+
+ /* Program ROW0/COL0 */
+ out_be32(&ifc->ifc_nand.row0, page_addr);
+ out_be32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column);
+
+ buf_num = page_addr & priv->bufnum_mask;
+
+ ctrl->addr = priv->vbase + buf_num * (mtd->writesize * 2);
+ ctrl->index = column;
+
+ /* for OOB data point to the second half of the buffer */
+ if (oob)
+ ctrl->index += mtd->writesize;
+}
+
+static int is_blank(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
+ unsigned int bufnum)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2);
+ u32 __iomem *main = (u32 *)addr;
+ u8 __iomem *oob = addr + mtd->writesize;
+ int i;
+
+ for (i = 0; i < mtd->writesize / 4; i++) {
+ if (__raw_readl(&main[i]) != 0xffffffff)
+ return 0;
+ }
+
+ for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
+ int pos = chip->ecc.layout->eccpos[i];
+
+ if (__raw_readb(&oob[pos]) != 0xff)
+ return 0;
+ }
+
+ return 1;
+}
+
+/* returns nonzero if entire page is blank */
+static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
+ u32 *eccstat, unsigned int bufnum)
+{
+ u32 reg = eccstat[bufnum / 4];
+ int errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
+
+ if (errors == 15) { /* uncorrectable */
+ /* Blank pages fail hw ECC checks */
+ if (is_blank(mtd, ctrl, bufnum))
+ return 1;
+
+ /*
+ * We disable ECCER reporting in hardware due to
+ * erratum IFC-A002770 -- so report it now if we
+ * see an uncorrectable error in ECCSTAT.
+ */
+ ctrl->status |= IFC_NAND_EVTER_STAT_ECCER;
+ } else if (errors > 0) {
+ mtd->ecc_stats.corrected += errors;
+ }
+
+ return 0;
+}
+
+/*
+ * execute IFC NAND command and wait for it to complete
+ */
+static int fsl_ifc_run_command(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc *ifc = ctrl->regs;
+ long long end_tick;
+ u32 eccstat[4];
+ int i;
+
+ /* set the chip select for NAND Transaction */
+ out_be32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
+
+ /* start read/write seq */
+ out_be32(&ifc->ifc_nand.nandseq_strt,
+ IFC_NAND_SEQ_STRT_FIR_STRT);
+
+ /* wait for NAND Machine complete flag or timeout */
+ end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
+
+ while (end_tick > get_ticks()) {
+ ctrl->status = in_be32(&ifc->ifc_nand.nand_evter_stat);
+
+ if (ctrl->status & IFC_NAND_EVTER_STAT_OPC)
+ break;
+ }
+
+ out_be32(&ifc->ifc_nand.nand_evter_stat, ctrl->status);
+
+ if (ctrl->status & IFC_NAND_EVTER_STAT_FTOER)
+ printf("%s: Flash Time Out Error\n", __func__);
+ if (ctrl->status & IFC_NAND_EVTER_STAT_WPER)
+ printf("%s: Write Protect Error\n", __func__);
+
+ if (ctrl->eccread) {
+ int bufperpage = mtd->writesize / 512;
+ int bufnum = (ctrl->page & priv->bufnum_mask) * bufperpage;
+ int bufnum_end = bufnum + bufperpage - 1;
+
+ for (i = bufnum / 4; i <= bufnum_end / 4; i++)
+ eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
+
+ for (i = bufnum; i <= bufnum_end; i++) {
+ if (check_read_ecc(mtd, ctrl, eccstat, i))
+ break;
+ }
+
+ ctrl->eccread = 0;
+ }
+
+ /* returns 0 on success otherwise non-zero) */
+ return ctrl->status == IFC_NAND_EVTER_STAT_OPC ? 0 : -EIO;
+}
+
+static void fsl_ifc_do_read(struct nand_chip *chip,
+ int oob,
+ struct mtd_info *mtd)
+{
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc *ifc = ctrl->regs;
+
+ /* Program FIR/IFC_NAND_FCR0 for Small/Large page */
+ if (mtd->writesize > 512) {
+ out_be32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT));
+ out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
+
+ out_be32(&ifc->ifc_nand.nand_fcr0,
+ (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
+ } else {
+ out_be32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT));
+
+ if (oob)
+ out_be32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT);
+ else
+ out_be32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
+ }
+}
+
+/* cmdfunc send commands to the IFC NAND Machine */
+static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc *ifc = ctrl->regs;
+
+ /* clear the read buffer */
+ ctrl->read_bytes = 0;
+ if (command != NAND_CMD_PAGEPROG)
+ ctrl->index = 0;
+
+ switch (command) {
+ /* READ0 read the entire buffer to use hardware ECC. */
+ case NAND_CMD_READ0: {
+ out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+ set_addr(mtd, 0, page_addr, 0);
+
+ ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+ ctrl->index += column;
+
+ if (chip->ecc.mode == NAND_ECC_HW)
+ ctrl->eccread = 1;
+
+ fsl_ifc_do_read(chip, 0, mtd);
+ fsl_ifc_run_command(mtd);
+ return;
+ }
+
+ /* READOOB reads only the OOB because no ECC is performed. */
+ case NAND_CMD_READOOB:
+ out_be32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column);
+ set_addr(mtd, column, page_addr, 1);
+
+ ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+
+ fsl_ifc_do_read(chip, 1, mtd);
+ fsl_ifc_run_command(mtd);
+
+ return;
+
+ /* READID must read all possible bytes while CEB is active */
+ case NAND_CMD_READID:
+ out_be32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
+ out_be32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
+ /* 4 bytes for manuf, device and exts */
+ out_be32(&ifc->ifc_nand.nand_fbcr, 4);
+ ctrl->read_bytes = 4;
+
+ set_addr(mtd, 0, 0, 0);
+ fsl_ifc_run_command(mtd);
+ return;
+
+ /* ERASE1 stores the block and page address */
+ case NAND_CMD_ERASE1:
+ set_addr(mtd, 0, page_addr, 0);
+ return;
+
+ /* ERASE2 uses the block and page address from ERASE1 */
+ case NAND_CMD_ERASE2:
+ out_be32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT));
+
+ out_be32(&ifc->ifc_nand.nand_fcr0,
+ (NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT));
+
+ out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+ ctrl->read_bytes = 0;
+ fsl_ifc_run_command(mtd);
+ return;
+
+ /* SEQIN sets up the addr buffer and all registers except the length */
+ case NAND_CMD_SEQIN: {
+ u32 nand_fcr0;
+ ctrl->column = column;
+ ctrl->oob = 0;
+
+ if (mtd->writesize > 512) {
+ nand_fcr0 =
+ (NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT);
+
+ out_be32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT));
+ out_be32(&ifc->ifc_nand.nand_fir1, 0);
+ } else {
+ nand_fcr0 = ((NAND_CMD_PAGEPROG <<
+ IFC_NAND_FCR0_CMD1_SHIFT) |
+ (NAND_CMD_SEQIN <<
+ IFC_NAND_FCR0_CMD2_SHIFT));
+
+ out_be32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT));
+ out_be32(&ifc->ifc_nand.nand_fir1,
+ (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT));
+
+ if (column >= mtd->writesize) {
+ /* OOB area --> READOOB */
+ column -= mtd->writesize;
+ nand_fcr0 |= NAND_CMD_READOOB <<
+ IFC_NAND_FCR0_CMD0_SHIFT;
+ ctrl->oob = 1;
+ } else if (column < 256) {
+ /* First 256 bytes --> READ0 */
+ nand_fcr0 |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
+ } else {
+ /* Second 256 bytes --> READ1 */
+ nand_fcr0 |= NAND_CMD_READ1 << FCR_CMD0_SHIFT;
+ }
+ }
+
+ out_be32(&ifc->ifc_nand.nand_fcr0, nand_fcr0);
+ set_addr(mtd, column, page_addr, ctrl->oob);
+ return;
+ }
+
+ /* PAGEPROG reuses all of the setup from SEQIN and adds the length */
+ case NAND_CMD_PAGEPROG:
+ if (ctrl->oob)
+ out_be32(&ifc->ifc_nand.nand_fbcr, ctrl->index);
+ else
+ out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+
+ fsl_ifc_run_command(mtd);
+ return;
+
+ case NAND_CMD_STATUS:
+ out_be32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT));
+ out_be32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT);
+ out_be32(&ifc->ifc_nand.nand_fbcr, 1);
+ set_addr(mtd, 0, 0, 0);
+ ctrl->read_bytes = 1;
+
+ fsl_ifc_run_command(mtd);
+
+ /* Chip sometimes reporting write protect even when it's not */
+ out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP);
+ return;
+
+ case NAND_CMD_RESET:
+ out_be32(&ifc->ifc_nand.nand_fir0,
+ IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT);
+ out_be32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT);
+ fsl_ifc_run_command(mtd);
+ return;
+
+ default:
+ printf("%s: error, unsupported command 0x%x.\n",
+ __func__, command);
+ }
+}
+
+/*
+ * Write buf to the IFC NAND Controller Data Buffer
+ */
+static void fsl_ifc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ unsigned int bufsize = mtd->writesize + mtd->oobsize;
+
+ if (len <= 0) {
+ printf("%s of %d bytes", __func__, len);
+ ctrl->status = 0;
+ return;
+ }
+
+ if ((unsigned int)len > bufsize - ctrl->index) {
+ printf("%s beyond end of buffer "
+ "(%d requested, %u available)\n",
+ __func__, len, bufsize - ctrl->index);
+ len = bufsize - ctrl->index;
+ }
+
+ memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
+ ctrl->index += len;
+}
+
+/*
+ * read a byte from either the IFC hardware buffer if it has any data left
+ * otherwise issue a command to read a single byte.
+ */
+static u8 fsl_ifc_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+
+ /* If there are still bytes in the IFC buffer, then use the
+ * next byte. */
+ if (ctrl->index < ctrl->read_bytes)
+ return in_8(&ctrl->addr[ctrl->index++]);
+
+ printf("%s beyond end of buffer\n", __func__);
+ return ERR_BYTE;
+}
+
+/*
+ * Read two bytes from the IFC hardware buffer
+ * read function for 16-bit buswith
+ */
+static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ uint16_t data;
+
+ /*
+ * If there are still bytes in the IFC buffer, then use the
+ * next byte.
+ */
+ if (ctrl->index < ctrl->read_bytes) {
+ data = in_be16((uint16_t *)&ctrl->
+ addr[ctrl->index]);
+ ctrl->index += 2;
+ return (uint8_t)data;
+ }
+
+ printf("%s beyond end of buffer\n", __func__);
+ return ERR_BYTE;
+}
+
+/*
+ * Read from the IFC Controller Data Buffer
+ */
+static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ int avail;
+
+ if (len < 0)
+ return;
+
+ avail = min((unsigned int)len, ctrl->read_bytes - ctrl->index);
+ memcpy_fromio(buf, &ctrl->addr[ctrl->index], avail);
+ ctrl->index += avail;
+
+ if (len > avail)
+ printf("%s beyond end of buffer "
+ "(%d requested, %d available)\n",
+ __func__, len, avail);
+}
+
+/*
+ * Verify buffer against the IFC Controller Data Buffer
+ */
+static int fsl_ifc_verify_buf(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ int i;
+
+ if (len < 0) {
+ printf("%s of %d bytes", __func__, len);
+ return -EINVAL;
+ }
+
+ if ((unsigned int)len > ctrl->read_bytes - ctrl->index) {
+ printf("%s beyond end of buffer "
+ "(%d requested, %u available)\n",
+ __func__, len, ctrl->read_bytes - ctrl->index);
+
+ ctrl->index = ctrl->read_bytes;
+ return -EINVAL;
+ }
+
+ for (i = 0; i < len; i++)
+ if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i])
+ break;
+
+ ctrl->index += len;
+ return i == len && ctrl->status == IFC_NAND_EVTER_STAT_OPC ? 0 : -EIO;
+}
+
+/* This function is called after Program and Erase Operations to
+ * check for success or failure.
+ */
+static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc *ifc = ctrl->regs;
+ u32 nand_fsr;
+
+ if (ctrl->status != IFC_NAND_EVTER_STAT_OPC)
+ return NAND_STATUS_FAIL;
+
+ /* Use READ_STATUS command, but wait for the device to be ready */
+ out_be32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT));
+ out_be32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS <<
+ IFC_NAND_FCR0_CMD0_SHIFT);
+ out_be32(&ifc->ifc_nand.nand_fbcr, 1);
+ set_addr(mtd, 0, 0, 0);
+ ctrl->read_bytes = 1;
+
+ fsl_ifc_run_command(mtd);
+
+ if (ctrl->status != IFC_NAND_EVTER_STAT_OPC)
+ return NAND_STATUS_FAIL;
+
+ nand_fsr = in_be32(&ifc->ifc_nand.nand_fsr);
+
+ /* Chip sometimes reporting write protect even when it's not */
+ nand_fsr = nand_fsr | NAND_STATUS_WP;
+ return nand_fsr;
+}
+
+static int fsl_ifc_read_page(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+
+ fsl_ifc_read_buf(mtd, buf, mtd->writesize);
+ fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ if (ctrl->status != IFC_NAND_EVTER_STAT_OPC)
+ mtd->ecc_stats.failed++;
+
+ return 0;
+}
+
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static void fsl_ifc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ fsl_ifc_write_buf(mtd, buf, mtd->writesize);
+ fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
+
+static void fsl_ifc_ctrl_init(void)
+{
+ ifc_ctrl = kzalloc(sizeof(*ifc_ctrl), GFP_KERNEL);
+ if (!ifc_ctrl)
+ return;
+
+ ifc_ctrl->regs = IFC_BASE_ADDR;
+
+ /* clear event registers */
+ out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_stat, ~0U);
+ out_be32(&ifc_ctrl->regs->ifc_nand.pgrdcmpl_evt_stat, ~0U);
+
+ /* Enable error and event for any detected errors */
+ out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_en,
+ IFC_NAND_EVTER_EN_OPC_EN |
+ IFC_NAND_EVTER_EN_PGRDCMPL_EN |
+ IFC_NAND_EVTER_EN_FTOER_EN |
+ IFC_NAND_EVTER_EN_WPER_EN);
+
+ out_be32(&ifc_ctrl->regs->ifc_nand.ncfgr, 0x0);
+}
+
+static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip)
+{
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ struct fsl_ifc_mtd *priv;
+ struct nand_ecclayout *layout;
+ uint32_t cspr = 0, csor = 0;
+
+ if (!ifc_ctrl) {
+ fsl_ifc_ctrl_init();
+ if (!ifc_ctrl)
+ return -1;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->ctrl = ifc_ctrl;
+ priv->vbase = nand->IO_ADDR_R;
+
+ /* Find which chip select it is connected to.
+ */
+ for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) {
+ phys_addr_t base_addr = virt_to_phys(nand->IO_ADDR_R);
+
+ cspr = in_be32(&ifc_ctrl->regs->cspr_cs[priv->bank].cspr);
+ csor = in_be32(&ifc_ctrl->regs->csor_cs[priv->bank].csor);
+
+ if ((cspr & CSPR_V) && (cspr & CSPR_MSEL) == CSPR_MSEL_NAND &&
+ (cspr & CSPR_BA) == CSPR_PHYS_ADDR(base_addr)) {
+ ifc_ctrl->cs_nand = priv->bank << IFC_NAND_CSEL_SHIFT;
+ break;
+ }
+ }
+
+ if (priv->bank >= MAX_BANKS) {
+ printf("%s: address did not match any "
+ "chip selects\n", __func__);
+ return -ENODEV;
+ }
+
+ ifc_ctrl->chips[priv->bank] = priv;
+
+ /* fill in nand_chip structure */
+ /* set up function call table */
+
+ nand->write_buf = fsl_ifc_write_buf;
+ nand->read_buf = fsl_ifc_read_buf;
+ nand->verify_buf = fsl_ifc_verify_buf;
+ nand->select_chip = fsl_ifc_select_chip;
+ nand->cmdfunc = fsl_ifc_cmdfunc;
+ nand->waitfunc = fsl_ifc_wait;
+
+ /* set up nand options */
+ nand->bbt_td = &bbt_main_descr;
+ nand->bbt_md = &bbt_mirror_descr;
+
+ /* set up nand options */
+ nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
+ NAND_USE_FLASH_BBT;
+
+ if (cspr & CSPR_PORT_SIZE_16) {
+ nand->read_byte = fsl_ifc_read_byte16;
+ nand->options |= NAND_BUSWIDTH_16;
+ } else {
+ nand->read_byte = fsl_ifc_read_byte;
+ }
+
+ nand->controller = &ifc_ctrl->controller;
+ nand->priv = priv;
+
+ nand->ecc.read_page = fsl_ifc_read_page;
+ nand->ecc.write_page = fsl_ifc_write_page;
+
+ /* Hardware generates ECC per 512 Bytes */
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 8;
+
+ switch (csor & CSOR_NAND_PGS_MASK) {
+ case CSOR_NAND_PGS_512:
+ if (nand->options & NAND_BUSWIDTH_16) {
+ layout = &oob_512_16bit_ecc4;
+ } else {
+ layout = &oob_512_8bit_ecc4;
+
+ /* Avoid conflict with bad block marker */
+ bbt_main_descr.offs = 0;
+ bbt_mirror_descr.offs = 0;
+ }
+
+ priv->bufnum_mask = 15;
+ break;
+
+ case CSOR_NAND_PGS_2K:
+ layout = &oob_2048_ecc4;
+ priv->bufnum_mask = 3;
+ break;
+
+ case CSOR_NAND_PGS_4K:
+ if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
+ CSOR_NAND_ECC_MODE_4) {
+ layout = &oob_4096_ecc4;
+ } else {
+ layout = &oob_4096_ecc8;
+ nand->ecc.bytes = 16;
+ }
+
+ priv->bufnum_mask = 1;
+ break;
+
+ default:
+ printf("ifc nand: bad csor %#x: bad page size\n", csor);
+ return -ENODEV;
+ }
+
+ /* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
+ if (csor & CSOR_NAND_ECC_DEC_EN) {
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.layout = layout;
+ } else {
+ nand->ecc.mode = NAND_ECC_SOFT;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 34b432217..1f9436053 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -81,6 +81,7 @@ COBJS-$(CONFIG_TIGON3) += bcm570x_autoneg.o
COBJS-$(CONFIG_TIGON3) += 5701rls.o
COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
COBJS-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
+COBJS-$(CONFIG_FMAN_ENET) += fsl_mdio.o
COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o
COBJS-$(CONFIG_ULI526X) += uli526x.o
COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
new file mode 100644
index 000000000..072b178a0
--- /dev/null
+++ b/drivers/net/fm/Makefile
@@ -0,0 +1,62 @@
+#
+# Copyright 2009-2011 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libfm.o
+
+ifdef CONFIG_FMAN_ENET
+COBJS-y += dtsec.o
+COBJS-y += eth.o
+COBJS-y += fm.o
+COBJS-y += init.o
+COBJS-y += tgec.o
+COBJS-y += tgec_phy.o
+
+# SoC specific SERDES support
+COBJS-$(CONFIG_P1017) += p1023.o
+COBJS-$(CONFIG_P1023) += p1023.o
+# The P204x, P304x, and P5020 are the same
+COBJS-$(CONFIG_PPC_P2040) += p5020.o
+COBJS-$(CONFIG_PPC_P2041) += p5020.o
+COBJS-$(CONFIG_PPC_P3041) += p5020.o
+COBJS-$(CONFIG_PPC_P3060) += p3060.o
+COBJS-$(CONFIG_PPC_P4080) += p4080.o
+COBJS-$(CONFIG_PPC_P5020) += p5020.o
+endif
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/net/fm/dtsec.c b/drivers/net/fm/dtsec.c
new file mode 100644
index 000000000..a77ee20f3
--- /dev/null
+++ b/drivers/net/fm/dtsec.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/fsl_enet.h>
+#include <asm/fsl_dtsec.h>
+#include <fsl_mdio.h>
+#include <phy.h>
+
+#include "fm.h"
+
+#define RCTRL_INIT (RCTRL_GRS | RCTRL_UPROM)
+#define TCTRL_INIT TCTRL_GTS
+#define MACCFG1_INIT MACCFG1_SOFT_RST
+
+#define MACCFG2_INIT (MACCFG2_PRE_LEN(0x7) | MACCFG2_LEN_CHECK | \
+ MACCFG2_PAD_CRC | MACCFG2_FULL_DUPLEX | \
+ MACCFG2_IF_MODE_NIBBLE)
+
+/* MAXFRM - maximum frame length register */
+#define MAXFRM_MASK 0x00003fff
+
+static void dtsec_init_mac(struct fsl_enet_mac *mac)
+{
+ struct dtsec *regs = mac->base;
+
+ /* soft reset */
+ out_be32(&regs->maccfg1, MACCFG1_SOFT_RST);
+ udelay(1000);
+
+ /* clear soft reset, Rx/Tx MAC disable */
+ out_be32(&regs->maccfg1, 0);
+
+ /* graceful stop rx */
+ out_be32(&regs->rctrl, RCTRL_INIT);
+ udelay(1000);
+
+ /* graceful stop tx */
+ out_be32(&regs->tctrl, TCTRL_INIT);
+ udelay(1000);
+
+ /* disable all interrupts */
+ out_be32(&regs->imask, IMASK_MASK_ALL);
+
+ /* clear all events */
+ out_be32(&regs->ievent, IEVENT_CLEAR_ALL);
+
+ /* set the max Rx length */
+ out_be32(&regs->maxfrm, mac->max_rx_len & MAXFRM_MASK);
+
+ /* set the ecntrl to reset value */
+ out_be32(&regs->ecntrl, ECNTRL_DEFAULT);
+
+ /*
+ * Rx length check, no strip CRC for Rx, pad and append CRC for Tx,
+ * full duplex
+ */
+ out_be32(&regs->maccfg2, MACCFG2_INIT);
+}
+
+static void dtsec_enable_mac(struct fsl_enet_mac *mac)
+{
+ struct dtsec *regs = mac->base;
+
+ /* enable Rx/Tx MAC */
+ setbits_be32(&regs->maccfg1, MACCFG1_RXTX_EN);
+
+ /* clear the graceful Rx stop */
+ clrbits_be32(&regs->rctrl, RCTRL_GRS);
+
+ /* clear the graceful Tx stop */
+ clrbits_be32(&regs->tctrl, TCTRL_GTS);
+}
+
+static void dtsec_disable_mac(struct fsl_enet_mac *mac)
+{
+ struct dtsec *regs = mac->base;
+
+ /* graceful Rx stop */
+ setbits_be32(&regs->rctrl, RCTRL_GRS);
+
+ /* graceful Tx stop */
+ setbits_be32(&regs->tctrl, TCTRL_GTS);
+
+ /* disable Rx/Tx MAC */
+ clrbits_be32(&regs->maccfg1, MACCFG1_RXTX_EN);
+}
+
+static void dtsec_set_mac_addr(struct fsl_enet_mac *mac, u8 *mac_addr)
+{
+ struct dtsec *regs = mac->base;
+ u32 mac_addr1, mac_addr2;
+
+ /*
+ * if a station address of 0x12345678ABCD, perform a write to
+ * MACSTNADDR1 of 0xCDAB7856, MACSTNADDR2 of 0x34120000
+ */
+ mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \
+ (mac_addr[3] << 8) | (mac_addr[2]);
+ out_be32(&regs->macstnaddr1, mac_addr1);
+
+ mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000;
+ out_be32(&regs->macstnaddr2, mac_addr2);
+}
+
+static void dtsec_set_interface_mode(struct fsl_enet_mac *mac,
+ phy_interface_t type, int speed)
+{
+ struct dtsec *regs = mac->base;
+ u32 ecntrl, maccfg2;
+
+ /* clear all bits relative with interface mode */
+ ecntrl = in_be32(&regs->ecntrl);
+ ecntrl &= ~(ECNTRL_TBIM | ECNTRL_GMIIM | ECNTRL_RPM |
+ ECNTRL_R100M | ECNTRL_SGMIIM);
+
+ maccfg2 = in_be32(&regs->maccfg2);
+ maccfg2 &= ~MACCFG2_IF_MODE_MASK;
+
+ if (speed == SPEED_1000)
+ maccfg2 |= MACCFG2_IF_MODE_BYTE;
+ else
+ maccfg2 |= MACCFG2_IF_MODE_NIBBLE;
+
+ /* set interface mode */
+ switch (type) {
+ case PHY_INTERFACE_MODE_GMII:
+ ecntrl |= ECNTRL_GMIIM;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ ecntrl |= (ECNTRL_GMIIM | ECNTRL_RPM);
+ if (speed == SPEED_100)
+ ecntrl |= ECNTRL_R100M;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ if (speed == SPEED_100)
+ ecntrl |= ECNTRL_R100M;
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ ecntrl |= (ECNTRL_SGMIIM | ECNTRL_TBIM);
+ if (speed == SPEED_100)
+ ecntrl |= ECNTRL_R100M;
+ break;
+ default:
+ break;
+ }
+
+ out_be32(&regs->ecntrl, ecntrl);
+ out_be32(&regs->maccfg2, maccfg2);
+}
+
+void init_dtsec(struct fsl_enet_mac *mac, void *base,
+ void *phyregs, int max_rx_len)
+{
+ mac->base = base;
+ mac->phyregs = NULL;
+ mac->max_rx_len = max_rx_len;
+ mac->init_mac = dtsec_init_mac;
+ mac->enable_mac = dtsec_enable_mac;
+ mac->disable_mac = dtsec_disable_mac;
+ mac->set_mac_addr = dtsec_set_mac_addr;
+ mac->set_if_mode = dtsec_set_interface_mode;
+}
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
new file mode 100644
index 000000000..308d610a7
--- /dev/null
+++ b/drivers/net/fm/eth.c
@@ -0,0 +1,670 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <net.h>
+#include <hwconfig.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+#include <asm/fsl_tgec.h>
+
+#include "fm.h"
+
+static struct eth_device *devlist[NUM_FM_PORTS];
+static int num_controllers;
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
+
+#define TBIANA_SETTINGS (TBIANA_ASYMMETRIC_PAUSE | TBIANA_SYMMETRIC_PAUSE | \
+ TBIANA_FULL_DUPLEX)
+
+#define TBIANA_SGMII_ACK 0x4001
+
+#define TBICR_SETTINGS (TBICR_ANEG_ENABLE | TBICR_RESTART_ANEG | \
+ TBICR_FULL_DUPLEX | TBICR_SPEED1_SET)
+
+/* Configure the TBI for SGMII operation */
+void dtsec_configure_serdes(struct fm_eth *priv)
+{
+ struct dtsec *regs = priv->mac->base;
+ struct tsec_mii_mng *phyregs = priv->mac->phyregs;
+
+ /*
+ * Access TBI PHY registers at given TSEC register offset as
+ * opposed to the register offset used for external PHY accesses
+ */
+ tsec_local_mdio_write(phyregs, in_be32(&regs->tbipa), 0, TBI_TBICON,
+ TBICON_CLK_SELECT);
+ tsec_local_mdio_write(phyregs, in_be32(&regs->tbipa), 0, TBI_ANA,
+ TBIANA_SGMII_ACK);
+ tsec_local_mdio_write(phyregs, in_be32(&regs->tbipa), 0,
+ TBI_CR, TBICR_SETTINGS);
+}
+
+static void dtsec_init_phy(struct eth_device *dev)
+{
+ struct fm_eth *fm_eth = dev->priv;
+ struct dtsec *regs = (struct dtsec *)fm_eth->mac->base;
+
+ /* Assign a Physical address to the TBI */
+ out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
+
+ if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII)
+ dtsec_configure_serdes(fm_eth);
+}
+
+static int tgec_is_fibre(struct eth_device *dev)
+{
+ struct fm_eth *fm = dev->priv;
+ char phyopt[20];
+
+ sprintf(phyopt, "fsl_fm%d_xaui_phy", fm->fm_index + 1);
+
+ return hwconfig_arg_cmp(phyopt, "xfi");
+}
+#endif
+
+static u16 muram_readw(u16 *addr)
+{
+ u32 base = (u32)addr & ~0x3;
+ u32 val32 = *(u32 *)base;
+ int byte_pos;
+ u16 ret;
+
+ byte_pos = (u32)addr & 0x3;
+ if (byte_pos)
+ ret = (u16)(val32 & 0x0000ffff);
+ else
+ ret = (u16)((val32 & 0xffff0000) >> 16);
+
+ return ret;
+}
+
+static void muram_writew(u16 *addr, u16 val)
+{
+ u32 base = (u32)addr & ~0x3;
+ u32 org32 = *(u32 *)base;
+ u32 val32;
+ int byte_pos;
+
+ byte_pos = (u32)addr & 0x3;
+ if (byte_pos)
+ val32 = (org32 & 0xffff0000) | val;
+ else
+ val32 = (org32 & 0x0000ffff) | ((u32)val << 16);
+
+ *(u32 *)base = val32;
+}
+
+static void bmi_rx_port_disable(struct fm_bmi_rx_port *rx_port)
+{
+ int timeout = 1000000;
+
+ clrbits_be32(&rx_port->fmbm_rcfg, FMBM_RCFG_EN);
+
+ /* wait until the rx port is not busy */
+ while ((in_be32(&rx_port->fmbm_rst) & FMBM_RST_BSY) && timeout--)
+ ;
+}
+
+static void bmi_rx_port_init(struct fm_bmi_rx_port *rx_port)
+{
+ /* set BMI to independent mode, Rx port disable */
+ out_be32(&rx_port->fmbm_rcfg, FMBM_RCFG_IM);
+ /* clear FOF in IM case */
+ out_be32(&rx_port->fmbm_rim, 0);
+ /* Rx frame next engine -RISC */
+ out_be32(&rx_port->fmbm_rfne, NIA_ENG_RISC | NIA_RISC_AC_IM_RX);
+ /* Rx command attribute - no order, MR[3] = 1 */
+ clrbits_be32(&rx_port->fmbm_rfca, FMBM_RFCA_ORDER | FMBM_RFCA_MR_MASK);
+ setbits_be32(&rx_port->fmbm_rfca, FMBM_RFCA_MR(4));
+ /* enable Rx statistic counters */
+ out_be32(&rx_port->fmbm_rstc, FMBM_RSTC_EN);
+ /* disable Rx performance counters */
+ out_be32(&rx_port->fmbm_rpc, 0);
+}
+
+static void bmi_tx_port_disable(struct fm_bmi_tx_port *tx_port)
+{
+ int timeout = 1000000;
+
+ clrbits_be32(&tx_port->fmbm_tcfg, FMBM_TCFG_EN);
+
+ /* wait until the tx port is not busy */
+ while ((in_be32(&tx_port->fmbm_tst) & FMBM_TST_BSY) && timeout--)
+ ;
+}
+
+static void bmi_tx_port_init(struct fm_bmi_tx_port *tx_port)
+{
+ /* set BMI to independent mode, Tx port disable */
+ out_be32(&tx_port->fmbm_tcfg, FMBM_TCFG_IM);
+ /* Tx frame next engine -RISC */
+ out_be32(&tx_port->fmbm_tfne, NIA_ENG_RISC | NIA_RISC_AC_IM_TX);
+ out_be32(&tx_port->fmbm_tfene, NIA_ENG_RISC | NIA_RISC_AC_IM_TX);
+ /* Tx command attribute - no order, MR[3] = 1 */
+ clrbits_be32(&tx_port->fmbm_tfca, FMBM_TFCA_ORDER | FMBM_TFCA_MR_MASK);
+ setbits_be32(&tx_port->fmbm_tfca, FMBM_TFCA_MR(4));
+ /* enable Tx statistic counters */
+ out_be32(&tx_port->fmbm_tstc, FMBM_TSTC_EN);
+ /* disable Tx performance counters */
+ out_be32(&tx_port->fmbm_tpc, 0);
+}
+
+static int fm_eth_rx_port_parameter_init(struct fm_eth *fm_eth)
+{
+ struct fm_port_global_pram *pram;
+ u32 pram_page_offset;
+ void *rx_bd_ring_base;
+ void *rx_buf_pool;
+ struct fm_port_bd *rxbd;
+ struct fm_port_qd *rxqd;
+ struct fm_bmi_rx_port *bmi_rx_port = fm_eth->rx_port;
+ int i;
+
+ /* alloc global parameter ram at MURAM */
+ pram = (struct fm_port_global_pram *)fm_muram_alloc(fm_eth->fm_index,
+ FM_PRAM_SIZE, FM_PRAM_ALIGN);
+ fm_eth->rx_pram = pram;
+
+ /* parameter page offset to MURAM */
+ pram_page_offset = (u32)pram - fm_muram_base(fm_eth->fm_index);
+
+ /* enable global mode- snooping data buffers and BDs */
+ pram->mode = PRAM_MODE_GLOBAL;
+
+ /* init the Rx queue descriptor pionter */
+ pram->rxqd_ptr = pram_page_offset + 0x20;
+
+ /* set the max receive buffer length, power of 2 */
+ muram_writew(&pram->mrblr, MAX_RXBUF_LOG2);
+
+ /* alloc Rx buffer descriptors from main memory */
+ rx_bd_ring_base = malloc(sizeof(struct fm_port_bd)
+ * RX_BD_RING_SIZE);
+ if (!rx_bd_ring_base)
+ return 0;
+ memset(rx_bd_ring_base, 0, sizeof(struct fm_port_bd)
+ * RX_BD_RING_SIZE);
+
+ /* alloc Rx buffer from main memory */
+ rx_buf_pool = malloc(MAX_RXBUF_LEN * RX_BD_RING_SIZE);
+ if (!rx_buf_pool)
+ return 0;
+ memset(rx_buf_pool, 0, MAX_RXBUF_LEN * RX_BD_RING_SIZE);
+
+ /* save them to fm_eth */
+ fm_eth->rx_bd_ring = rx_bd_ring_base;
+ fm_eth->cur_rxbd = rx_bd_ring_base;
+ fm_eth->rx_buf = rx_buf_pool;
+
+ /* init Rx BDs ring */
+ rxbd = (struct fm_port_bd *)rx_bd_ring_base;
+ for (i = 0; i < RX_BD_RING_SIZE; i++) {
+ rxbd->status = RxBD_EMPTY;
+ rxbd->len = 0;
+ rxbd->buf_ptr_hi = 0;
+ rxbd->buf_ptr_lo = (u32)rx_buf_pool + i * MAX_RXBUF_LEN;
+ rxbd++;
+ }
+
+ /* set the Rx queue descriptor */
+ rxqd = &pram->rxqd;
+ muram_writew(&rxqd->gen, 0);
+ muram_writew(&rxqd->bd_ring_base_hi, 0);
+ rxqd->bd_ring_base_lo = (u32)rx_bd_ring_base;
+ muram_writew(&rxqd->bd_ring_size, sizeof(struct fm_port_bd)
+ * RX_BD_RING_SIZE);
+ muram_writew(&rxqd->offset_in, 0);
+ muram_writew(&rxqd->offset_out, 0);
+
+ /* set IM parameter ram pointer to Rx Frame Queue ID */
+ out_be32(&bmi_rx_port->fmbm_rfqid, pram_page_offset);
+
+ return 1;
+}
+
+static int fm_eth_tx_port_parameter_init(struct fm_eth *fm_eth)
+{
+ struct fm_port_global_pram *pram;
+ u32 pram_page_offset;
+ void *tx_bd_ring_base;
+ struct fm_port_bd *txbd;
+ struct fm_port_qd *txqd;
+ struct fm_bmi_tx_port *bmi_tx_port = fm_eth->tx_port;
+ int i;
+
+ /* alloc global parameter ram at MURAM */
+ pram = (struct fm_port_global_pram *)fm_muram_alloc(fm_eth->fm_index,
+ FM_PRAM_SIZE, FM_PRAM_ALIGN);
+ fm_eth->tx_pram = pram;
+
+ /* parameter page offset to MURAM */
+ pram_page_offset = (u32)pram - fm_muram_base(fm_eth->fm_index);
+
+ /* enable global mode- snooping data buffers and BDs */
+ pram->mode = PRAM_MODE_GLOBAL;
+
+ /* init the Tx queue descriptor pionter */
+ pram->txqd_ptr = pram_page_offset + 0x40;
+
+ /* alloc Tx buffer descriptors from main memory */
+ tx_bd_ring_base = malloc(sizeof(struct fm_port_bd)
+ * TX_BD_RING_SIZE);
+ if (!tx_bd_ring_base)
+ return 0;
+ memset(tx_bd_ring_base, 0, sizeof(struct fm_port_bd)
+ * TX_BD_RING_SIZE);
+ /* save it to fm_eth */
+ fm_eth->tx_bd_ring = tx_bd_ring_base;
+ fm_eth->cur_txbd = tx_bd_ring_base;
+
+ /* init Tx BDs ring */
+ txbd = (struct fm_port_bd *)tx_bd_ring_base;
+ for (i = 0; i < TX_BD_RING_SIZE; i++) {
+ txbd->status = TxBD_LAST;
+ txbd->len = 0;
+ txbd->buf_ptr_hi = 0;
+ txbd->buf_ptr_lo = 0;
+ }
+
+ /* set the Tx queue decriptor */
+ txqd = &pram->txqd;
+ muram_writew(&txqd->bd_ring_base_hi, 0);
+ txqd->bd_ring_base_lo = (u32)tx_bd_ring_base;
+ muram_writew(&txqd->bd_ring_size, sizeof(struct fm_port_bd)
+ * TX_BD_RING_SIZE);
+ muram_writew(&txqd->offset_in, 0);
+ muram_writew(&txqd->offset_out, 0);
+
+ /* set IM parameter ram pointer to Tx Confirmation Frame Queue ID */
+ out_be32(&bmi_tx_port->fmbm_tcfqid, pram_page_offset);
+
+ return 1;
+}
+
+static int fm_eth_init(struct fm_eth *fm_eth)
+{
+
+ if (!fm_eth_rx_port_parameter_init(fm_eth))
+ return 0;
+
+ if (!fm_eth_tx_port_parameter_init(fm_eth))
+ return 0;
+
+ return 1;
+}
+
+static int fm_eth_startup(struct fm_eth *fm_eth)
+{
+ struct fsl_enet_mac *mac;
+ mac = fm_eth->mac;
+
+ /* Rx/TxBDs, Rx/TxQDs, Rx buff and parameter ram init */
+ if (!fm_eth_init(fm_eth))
+ return 0;
+ /* setup the MAC controller */
+ mac->init_mac(mac);
+
+ /* For some reason we need to set SPEED_100 */
+ if ((fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) && mac->set_if_mode)
+ mac->set_if_mode(mac, fm_eth->enet_if, SPEED_100);
+
+ /* init bmi rx port, IM mode and disable */
+ bmi_rx_port_init(fm_eth->rx_port);
+ /* init bmi tx port, IM mode and disable */
+ bmi_tx_port_init(fm_eth->tx_port);
+
+ return 1;
+}
+
+static void fmc_tx_port_graceful_stop_enable(struct fm_eth *fm_eth)
+{
+ struct fm_port_global_pram *pram;
+
+ pram = fm_eth->tx_pram;
+ /* graceful stop transmission of frames */
+ pram->mode |= PRAM_MODE_GRACEFUL_STOP;
+ sync();
+}
+
+static void fmc_tx_port_graceful_stop_disable(struct fm_eth *fm_eth)
+{
+ struct fm_port_global_pram *pram;
+
+ pram = fm_eth->tx_pram;
+ /* re-enable transmission of frames */
+ pram->mode &= ~PRAM_MODE_GRACEFUL_STOP;
+ sync();
+}
+
+static int fm_eth_open(struct eth_device *dev, bd_t *bd)
+{
+ struct fm_eth *fm_eth;
+ struct fsl_enet_mac *mac;
+
+ fm_eth = (struct fm_eth *)dev->priv;
+ mac = fm_eth->mac;
+
+ /* setup the MAC address */
+ if (dev->enetaddr[0] & 0x01) {
+ printf("%s: MacAddress is multcast address\n", __func__);
+ return 1;
+ }
+ mac->set_mac_addr(mac, dev->enetaddr);
+
+ /* enable bmi Rx port */
+ setbits_be32(&fm_eth->rx_port->fmbm_rcfg, FMBM_RCFG_EN);
+ /* enable MAC rx/tx port */
+ mac->enable_mac(mac);
+ /* enable bmi Tx port */
+ setbits_be32(&fm_eth->tx_port->fmbm_tcfg, FMBM_TCFG_EN);
+ /* re-enable transmission of frame */
+ fmc_tx_port_graceful_stop_disable(fm_eth);
+
+#ifdef CONFIG_PHYLIB
+ phy_startup(fm_eth->phydev);
+#else
+ fm_eth->phydev->speed = SPEED_1000;
+ fm_eth->phydev->link = 1;
+ fm_eth->phydev->duplex = DUPLEX_FULL;
+#endif
+
+ /* set the MAC-PHY mode */
+ mac->set_if_mode(mac, fm_eth->enet_if, fm_eth->phydev->speed);
+
+ if (!fm_eth->phydev->link)
+ printf("%s: No link.\n", fm_eth->phydev->dev->name);
+
+ return fm_eth->phydev->link ? 0 : -1;
+}
+
+static void fm_eth_halt(struct eth_device *dev)
+{
+ struct fm_eth *fm_eth;
+ struct fsl_enet_mac *mac;
+
+ fm_eth = (struct fm_eth *)dev->priv;
+ mac = fm_eth->mac;
+
+ /* graceful stop the transmission of frames */
+ fmc_tx_port_graceful_stop_enable(fm_eth);
+ /* disable bmi Tx port */
+ bmi_tx_port_disable(fm_eth->tx_port);
+ /* disable MAC rx/tx port */
+ mac->disable_mac(mac);
+ /* disable bmi Rx port */
+ bmi_rx_port_disable(fm_eth->rx_port);
+
+ phy_shutdown(fm_eth->phydev);
+}
+
+static int fm_eth_send(struct eth_device *dev, volatile void *buf, int len)
+{
+ struct fm_eth *fm_eth;
+ struct fm_port_global_pram *pram;
+ struct fm_port_bd *txbd, *txbd_base;
+ u16 offset_in;
+ int i;
+
+ fm_eth = (struct fm_eth *)dev->priv;
+ pram = fm_eth->tx_pram;
+ txbd = fm_eth->cur_txbd;
+
+ /* find one empty TxBD */
+ for (i = 0; txbd->status & TxBD_READY; i++) {
+ udelay(100);
+ if (i > 0x1000) {
+ printf("%s: Tx buffer not ready\n", dev->name);
+ return 0;
+ }
+ }
+ /* setup TxBD */
+ txbd->buf_ptr_hi = 0;
+ txbd->buf_ptr_lo = (u32)buf;
+ txbd->len = len;
+ sync();
+ txbd->status = TxBD_READY | TxBD_LAST;
+ sync();
+
+ /* update TxQD, let RISC to send the packet */
+ offset_in = muram_readw(&pram->txqd.offset_in);
+ offset_in += sizeof(struct fm_port_bd);
+ if (offset_in >= muram_readw(&pram->txqd.bd_ring_size))
+ offset_in = 0;
+ muram_writew(&pram->txqd.offset_in, offset_in);
+ sync();
+
+ /* wait for buffer to be transmitted */
+ for (i = 0; txbd->status & TxBD_READY; i++) {
+ udelay(100);
+ if (i > 0x10000) {
+ printf("%s: Tx error\n", dev->name);
+ return 0;
+ }
+ }
+
+ /* advance the TxBD */
+ txbd++;
+ txbd_base = (struct fm_port_bd *)fm_eth->tx_bd_ring;
+ if (txbd >= (txbd_base + TX_BD_RING_SIZE))
+ txbd = txbd_base;
+ /* update current txbd */
+ fm_eth->cur_txbd = (void *)txbd;
+
+ return 1;
+}
+
+static int fm_eth_recv(struct eth_device *dev)
+{
+ struct fm_eth *fm_eth;
+ struct fm_port_global_pram *pram;
+ struct fm_port_bd *rxbd, *rxbd_base;
+ u16 status, len;
+ u8 *data;
+ u16 offset_out;
+
+ fm_eth = (struct fm_eth *)dev->priv;
+ pram = fm_eth->rx_pram;
+ rxbd = fm_eth->cur_rxbd;
+ status = rxbd->status;
+
+ while (!(status & RxBD_EMPTY)) {
+ if (!(status & RxBD_ERROR)) {
+ data = (u8 *)rxbd->buf_ptr_lo;
+ len = rxbd->len;
+ NetReceive(data, len);
+ } else {
+ printf("%s: Rx error\n", dev->name);
+ return 0;
+ }
+
+ /* clear the RxBDs */
+ rxbd->status = RxBD_EMPTY;
+ rxbd->len = 0;
+ sync();
+
+ /* advance RxBD */
+ rxbd++;
+ rxbd_base = (struct fm_port_bd *)fm_eth->rx_bd_ring;
+ if (rxbd >= (rxbd_base + RX_BD_RING_SIZE))
+ rxbd = rxbd_base;
+ /* read next status */
+ status = rxbd->status;
+
+ /* update RxQD */
+ offset_out = muram_readw(&pram->rxqd.offset_out);
+ offset_out += sizeof(struct fm_port_bd);
+ if (offset_out >= muram_readw(&pram->rxqd.bd_ring_size))
+ offset_out = 0;
+ muram_writew(&pram->rxqd.offset_out, offset_out);
+ sync();
+ }
+ fm_eth->cur_rxbd = (void *)rxbd;
+
+ return 1;
+}
+
+static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
+{
+ struct fsl_enet_mac *mac;
+ int num;
+ void *base, *phyregs = NULL;
+
+ num = fm_eth->num;
+
+ /* Get the mac registers base address */
+ if (fm_eth->type == FM_ETH_1G_E) {
+ base = &reg->mac_1g[num].fm_dtesc;
+ } else {
+ base = &reg->mac_10g[num].fm_10gec;
+ phyregs = &reg->mac_10g[num].fm_10gec_mdio;
+ }
+
+ /* alloc mac controller */
+ mac = malloc(sizeof(struct fsl_enet_mac));
+ if (!mac)
+ return 0;
+ memset(mac, 0, sizeof(struct fsl_enet_mac));
+
+ /* save the mac to fm_eth struct */
+ fm_eth->mac = mac;
+
+ if (fm_eth->type == FM_ETH_1G_E)
+ init_dtsec(mac, base, NULL, MAX_RXBUF_LEN);
+ else
+ init_tgec(mac, base, phyregs, MAX_RXBUF_LEN);
+
+ return 1;
+}
+
+static int init_phy(struct eth_device *dev)
+{
+ struct fm_eth *fm_eth = dev->priv;
+ struct phy_device *phydev = NULL;
+ u32 supported;
+
+#ifdef CONFIG_PHYLIB
+ if (fm_eth->type == FM_ETH_1G_E)
+ dtsec_init_phy(dev);
+
+ if (fm_eth->bus) {
+ phydev = phy_connect(fm_eth->bus, fm_eth->phyaddr, dev,
+ fm_eth->enet_if);
+ }
+
+ if (!phydev) {
+ printf("Failed to connect\n");
+ return -1;
+ }
+
+ if (fm_eth->type == FM_ETH_1G_E) {
+ supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full);
+ } else {
+ supported = SUPPORTED_10000baseT_Full;
+
+ if (tgec_is_fibre(dev))
+ phydev->port = PORT_FIBRE;
+ }
+
+ phydev->supported &= supported;
+ phydev->advertising = phydev->supported;
+
+ fm_eth->phydev = phydev;
+
+ phy_config(phydev);
+#endif
+
+ return 0;
+}
+
+int fm_eth_initialize(struct ccsr_fman *reg, struct fm_eth_info *info)
+{
+ struct eth_device *dev;
+ struct fm_eth *fm_eth;
+ int i, num = info->num;
+
+ /* alloc eth device */
+ dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+ if (!dev)
+ return 0;
+ memset(dev, 0, sizeof(struct eth_device));
+
+ /* alloc the FMan ethernet private struct */
+ fm_eth = (struct fm_eth *)malloc(sizeof(struct fm_eth));
+ if (!fm_eth)
+ return 0;
+ memset(fm_eth, 0, sizeof(struct fm_eth));
+
+ /* save off some things we need from the info struct */
+ fm_eth->fm_index = info->index - 1; /* keep as 0 based for muram */
+ fm_eth->num = num;
+ fm_eth->type = info->type;
+
+ fm_eth->rx_port = (void *)&reg->port[info->rx_port_id - 1].fm_bmi;
+ fm_eth->tx_port = (void *)&reg->port[info->tx_port_id - 1].fm_bmi;
+
+ /* set the ethernet max receive length */
+ fm_eth->max_rx_len = MAX_RXBUF_LEN;
+
+ /* init global mac structure */
+ if (!fm_eth_init_mac(fm_eth, reg))
+ return 0;
+
+ /* keep same as the manual, we call FMAN1, FMAN2, DTSEC1, DTSEC2, etc */
+ if (fm_eth->type == FM_ETH_1G_E)
+ sprintf(dev->name, "FM%d@DTSEC%d", info->index, num + 1);
+ else
+ sprintf(dev->name, "FM%d@TGEC%d", info->index, num + 1);
+
+ devlist[num_controllers++] = dev;
+ dev->iobase = 0;
+ dev->priv = (void *)fm_eth;
+ dev->init = fm_eth_open;
+ dev->halt = fm_eth_halt;
+ dev->send = fm_eth_send;
+ dev->recv = fm_eth_recv;
+ fm_eth->dev = dev;
+ fm_eth->bus = info->bus;
+ fm_eth->phyaddr = info->phy_addr;
+ fm_eth->enet_if = info->enet_if;
+
+ /* startup the FM im */
+ if (!fm_eth_startup(fm_eth))
+ return 0;
+
+ if (init_phy(dev))
+ return 0;
+
+ /* clear the ethernet address */
+ for (i = 0; i < 6; i++)
+ dev->enetaddr[i] = 0;
+ eth_register(dev);
+
+ return 1;
+}
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
new file mode 100644
index 000000000..23ef14baf
--- /dev/null
+++ b/drivers/net/fm/fm.c
@@ -0,0 +1,432 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#include "fm.h"
+#include "../../qe/qe.h" /* For struct qe_firmware */
+
+#ifdef CONFIG_SYS_QE_FW_IN_NAND
+#include <nand.h>
+#elif defined(CONFIG_SYS_QE_FW_IN_SPIFLASH)
+#include <spi_flash.h>
+#elif defined(CONFIG_SYS_QE_FW_IN_MMC)
+#include <mmc.h>
+#endif
+
+struct fm_muram muram[CONFIG_SYS_NUM_FMAN];
+
+u32 fm_muram_base(int fm_idx)
+{
+ return muram[fm_idx].base;
+}
+
+u32 fm_muram_alloc(int fm_idx, u32 size, u32 align)
+{
+ u32 ret;
+ u32 align_mask, off;
+ u32 save;
+
+ align_mask = align - 1;
+ save = muram[fm_idx].alloc;
+
+ off = save & align_mask;
+ if (off != 0)
+ muram[fm_idx].alloc += (align - off);
+ off = size & align_mask;
+ if (off != 0)
+ size += (align - off);
+ if ((muram[fm_idx].alloc + size) >= muram[fm_idx].top) {
+ muram[fm_idx].alloc = save;
+ printf("%s: run out of ram.\n", __func__);
+ }
+
+ ret = muram[fm_idx].alloc;
+ muram[fm_idx].alloc += size;
+ memset((void *)ret, 0, size);
+
+ return ret;
+}
+
+static void fm_init_muram(int fm_idx, void *reg)
+{
+ u32 base = (u32)reg;
+
+ muram[fm_idx].base = base;
+ muram[fm_idx].size = CONFIG_SYS_FM_MURAM_SIZE;
+ muram[fm_idx].alloc = base + FM_MURAM_RES_SIZE;
+ muram[fm_idx].top = base + CONFIG_SYS_FM_MURAM_SIZE;
+}
+
+/*
+ * fm_upload_ucode - Fman microcode upload worker function
+ *
+ * This function does the actual uploading of an Fman microcode
+ * to an Fman.
+ */
+static void fm_upload_ucode(int fm_idx, struct fm_imem *imem,
+ u32 *ucode, unsigned int size)
+{
+ unsigned int i;
+ unsigned int timeout = 1000000;
+
+ /* enable address auto increase */
+ out_be32(&imem->iadd, IRAM_IADD_AIE);
+ /* write microcode to IRAM */
+ for (i = 0; i < size / 4; i++)
+ out_be32(&imem->idata, ucode[i]);
+
+ /* verify if the writing is over */
+ out_be32(&imem->iadd, 0);
+ while ((in_be32(&imem->idata) != ucode[0]) && --timeout)
+ ;
+ if (!timeout)
+ printf("Fman%u: microcode upload timeout\n", fm_idx + 1);
+
+ /* enable microcode from IRAM */
+ out_be32(&imem->iready, IRAM_READY);
+}
+
+/*
+ * Upload an Fman firmware
+ *
+ * This function is similar to qe_upload_firmware(), exception that it uploads
+ * a microcode to the Fman instead of the QE.
+ *
+ * Because the process for uploading a microcode to the Fman is similar for
+ * that of the QE, the QE firmware binary format is used for Fman microcode.
+ * It should be possible to unify these two functions, but for now we keep them
+ * separate.
+ */
+static int fman_upload_firmware(int fm_idx,
+ struct fm_imem *fm_imem,
+ const struct qe_firmware *firmware)
+{
+ unsigned int i;
+ u32 crc;
+ size_t calc_size = sizeof(struct qe_firmware);
+ size_t length;
+ const struct qe_header *hdr;
+
+ if (!firmware) {
+ printf("Fman%u: Invalid address for firmware\n", fm_idx + 1);
+ return -EINVAL;
+ }
+
+ hdr = &firmware->header;
+ length = be32_to_cpu(hdr->length);
+
+ /* Check the magic */
+ if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
+ (hdr->magic[2] != 'F')) {
+ printf("Fman%u: Data at %p is not a firmware\n", fm_idx + 1,
+ firmware);
+ return -EPERM;
+ }
+
+ /* Check the version */
+ if (hdr->version != 1) {
+ printf("Fman%u: Unsupported firmware version %u\n", fm_idx + 1,
+ hdr->version);
+ return -EPERM;
+ }
+
+ /* Validate some of the fields */
+ if ((firmware->count != 1)) {
+ printf("Fman%u: Invalid data in firmware header\n", fm_idx + 1);
+ return -EINVAL;
+ }
+
+ /* Validate the length and check if there's a CRC */
+ calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);
+
+ for (i = 0; i < firmware->count; i++)
+ /*
+ * For situations where the second RISC uses the same microcode
+ * as the first, the 'code_offset' and 'count' fields will be
+ * zero, so it's okay to add those.
+ */
+ calc_size += sizeof(u32) *
+ be32_to_cpu(firmware->microcode[i].count);
+
+ /* Validate the length */
+ if (length != calc_size + sizeof(u32)) {
+ printf("Fman%u: Invalid length in firmware header\n",
+ fm_idx + 1);
+ return -EPERM;
+ }
+
+ /*
+ * Validate the CRC. We would normally call crc32_no_comp(), but that
+ * function isn't available unless you turn on JFFS support.
+ */
+ crc = be32_to_cpu(*(u32 *)((void *)firmware + calc_size));
+ if (crc != (crc32(-1, (const void *)firmware, calc_size) ^ -1)) {
+ printf("Fman%u: Firmware CRC is invalid\n", fm_idx + 1);
+ return -EIO;
+ }
+
+ /* Loop through each microcode. */
+ for (i = 0; i < firmware->count; i++) {
+ const struct qe_microcode *ucode = &firmware->microcode[i];
+
+ /* Upload a microcode if it's present */
+ if (ucode->code_offset) {
+ u32 ucode_size;
+ u32 *code;
+ printf("Fman%u: Uploading microcode version %u.%u.%u\n",
+ fm_idx + 1, ucode->major, ucode->minor,
+ ucode->revision);
+ code = (void *)firmware + ucode->code_offset;
+ ucode_size = sizeof(u32) * ucode->count;
+ fm_upload_ucode(fm_idx, fm_imem, code, ucode_size);
+ }
+ }
+
+ return 0;
+}
+
+static u32 fm_assign_risc(int port_id)
+{
+ u32 risc_sel, val;
+ risc_sel = (port_id & 0x1) ? FMFPPRC_RISC2 : FMFPPRC_RISC1;
+ val = (port_id << FMFPPRC_PORTID_SHIFT) & FMFPPRC_PORTID_MASK;
+ val |= ((risc_sel << FMFPPRC_ORA_SHIFT) | risc_sel);
+
+ return val;
+}
+
+static void fm_init_fpm(struct fm_fpm *fpm)
+{
+ int i, port_id;
+ u32 val;
+
+ setbits_be32(&fpm->fmfpee, FMFPEE_EHM | FMFPEE_UEC |
+ FMFPEE_CER | FMFPEE_DER);
+
+ /* IM mode, each even port ID to RISC#1, each odd port ID to RISC#2 */
+
+ /* offline/parser port */
+ for (i = 0; i < MAX_NUM_OH_PORT; i++) {
+ port_id = OH_PORT_ID_BASE + i;
+ val = fm_assign_risc(port_id);
+ out_be32(&fpm->fpmprc, val);
+ }
+ /* Rx 1G port */
+ for (i = 0; i < MAX_NUM_RX_PORT_1G; i++) {
+ port_id = RX_PORT_1G_BASE + i;
+ val = fm_assign_risc(port_id);
+ out_be32(&fpm->fpmprc, val);
+ }
+ /* Tx 1G port */
+ for (i = 0; i < MAX_NUM_TX_PORT_1G; i++) {
+ port_id = TX_PORT_1G_BASE + i;
+ val = fm_assign_risc(port_id);
+ out_be32(&fpm->fpmprc, val);
+ }
+ /* Rx 10G port */
+ port_id = RX_PORT_10G_BASE;
+ val = fm_assign_risc(port_id);
+ out_be32(&fpm->fpmprc, val);
+ /* Tx 10G port */
+ port_id = TX_PORT_10G_BASE;
+ val = fm_assign_risc(port_id);
+ out_be32(&fpm->fpmprc, val);
+
+ /* disable the dispatch limit in IM case */
+ out_be32(&fpm->fpmflc, FMFP_FLC_DISP_LIM_NONE);
+ /* clear events */
+ out_be32(&fpm->fmfpee, FMFPEE_CLEAR_EVENT);
+
+ /* clear risc events */
+ for (i = 0; i < 4; i++)
+ out_be32(&fpm->fpmcev[i], 0xffffffff);
+
+ /* clear error */
+ out_be32(&fpm->fpmrcr, FMFP_RCR_MDEC | FMFP_RCR_IDEC);
+}
+
+static int fm_init_bmi(int fm_idx, struct fm_bmi_common *bmi)
+{
+ int blk, i, port_id;
+ u32 val, offset, base;
+
+ /* alloc free buffer pool in MURAM */
+ base = fm_muram_alloc(fm_idx, FM_FREE_POOL_SIZE, FM_FREE_POOL_ALIGN);
+ if (!base) {
+ printf("%s: no muram for free buffer pool\n", __func__);
+ return -ENOMEM;
+ }
+ offset = base - fm_muram_base(fm_idx);
+
+ /* Need 128KB total free buffer pool size */
+ val = offset / 256;
+ blk = FM_FREE_POOL_SIZE / 256;
+ /* in IM, we must not begin from offset 0 in MURAM */
+ val |= ((blk - 1) << FMBM_CFG1_FBPS_SHIFT);
+ out_be32(&bmi->fmbm_cfg1, val);
+
+ /* disable all BMI interrupt */
+ out_be32(&bmi->fmbm_ier, FMBM_IER_DISABLE_ALL);
+
+ /* clear all events */
+ out_be32(&bmi->fmbm_ievr, FMBM_IEVR_CLEAR_ALL);
+
+ /*
+ * set port parameters - FMBM_PP_x
+ * max tasks 10G Rx/Tx=12, 1G Rx/Tx 4, others is 1
+ * max dma 10G Rx/Tx=3, others is 1
+ * set port FIFO size - FMBM_PFS_x
+ * 4KB for all Rx and Tx ports
+ */
+ /* offline/parser port */
+ for (i = 0; i < MAX_NUM_OH_PORT; i++) {
+ port_id = OH_PORT_ID_BASE + i - 1;
+ /* max tasks=1, max dma=1, no extra */
+ out_be32(&bmi->fmbm_pp[port_id], 0);
+ /* port FIFO size - 256 bytes, no extra */
+ out_be32(&bmi->fmbm_pfs[port_id], 0);
+ }
+ /* Rx 1G port */
+ for (i = 0; i < MAX_NUM_RX_PORT_1G; i++) {
+ port_id = RX_PORT_1G_BASE + i - 1;
+ /* max tasks=4, max dma=1, no extra */
+ out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(4));
+ /* FIFO size - 4KB, no extra */
+ out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf));
+ }
+ /* Tx 1G port FIFO size - 4KB, no extra */
+ for (i = 0; i < MAX_NUM_TX_PORT_1G; i++) {
+ port_id = TX_PORT_1G_BASE + i - 1;
+ /* max tasks=4, max dma=1, no extra */
+ out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(4));
+ /* FIFO size - 4KB, no extra */
+ out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf));
+ }
+ /* Rx 10G port */
+ port_id = RX_PORT_10G_BASE - 1;
+ /* max tasks=12, max dma=3, no extra */
+ out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(12) | FMBM_PP_MXD(3));
+ /* FIFO size - 4KB, no extra */
+ out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf));
+
+ /* Tx 10G port */
+ port_id = TX_PORT_10G_BASE - 1;
+ /* max tasks=12, max dma=3, no extra */
+ out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(12) | FMBM_PP_MXD(3));
+ /* FIFO size - 4KB, no extra */
+ out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf));
+
+ /* initialize internal buffers data base (linked list) */
+ out_be32(&bmi->fmbm_init, FMBM_INIT_START);
+
+ return 0;
+}
+
+static void fm_init_qmi(struct fm_qmi_common *qmi)
+{
+ /* disable enqueue and dequeue of QMI */
+ clrbits_be32(&qmi->fmqm_gc, FMQM_GC_ENQ_EN | FMQM_GC_DEQ_EN);
+
+ /* disable all error interrupts */
+ out_be32(&qmi->fmqm_eien, FMQM_EIEN_DISABLE_ALL);
+ /* clear all error events */
+ out_be32(&qmi->fmqm_eie, FMQM_EIE_CLEAR_ALL);
+
+ /* disable all interrupts */
+ out_be32(&qmi->fmqm_ien, FMQM_IEN_DISABLE_ALL);
+ /* clear all interrupts */
+ out_be32(&qmi->fmqm_ie, FMQM_IE_CLEAR_ALL);
+}
+
+/* Init common part of FM, index is fm num# like fm as above */
+int fm_init_common(int index, struct ccsr_fman *reg)
+{
+ int rc;
+ char env_addr[32];
+#if defined(CONFIG_SYS_FMAN_FW_ADDR)
+ void *addr = (void *)CONFIG_SYS_FMAN_FW_ADDR;
+#elif defined(CONFIG_SYS_QE_FW_IN_NAND)
+ size_t fw_length = CONFIG_SYS_FMAN_FW_LENGTH;
+ void *addr = malloc(CONFIG_SYS_FMAN_FW_LENGTH);
+
+ rc = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FW_IN_NAND,
+ &fw_length, (u_char *)addr);
+ if (rc == -EUCLEAN) {
+ printf("NAND read of FMAN firmware at offset 0x%x failed %d\n",
+ CONFIG_SYS_QE_FW_IN_NAND, rc);
+ }
+#elif defined(CONFIG_SYS_QE_FW_IN_SPIFLASH)
+ struct spi_flash *ucode_flash;
+ void *addr = malloc(CONFIG_SYS_FMAN_FW_LENGTH);
+ int ret = 0;
+
+ ucode_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+ CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+ if (!ucode_flash)
+ printf("SF: probe for ucode failed\n");
+ else {
+ ret = spi_flash_read(ucode_flash, CONFIG_SYS_QE_FW_IN_SPIFLASH,
+ CONFIG_SYS_FMAN_FW_LENGTH, addr);
+ if (ret)
+ printf("SF: read for ucode failed\n");
+ spi_flash_free(ucode_flash);
+ }
+#elif defined(CONFIG_SYS_QE_FW_IN_MMC)
+ int dev = CONFIG_SYS_MMC_ENV_DEV;
+ void *addr = malloc(CONFIG_SYS_FMAN_FW_LENGTH);
+ u32 cnt = CONFIG_SYS_FMAN_FW_LENGTH / 512;
+ u32 n;
+ u32 blk = CONFIG_SYS_QE_FW_IN_MMC / 512;
+ struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
+
+ if (!mmc)
+ printf("\nMMC cannot find device for ucode\n");
+ else {
+ printf("\nMMC read: dev # %u, block # %u, count %u ...\n",
+ dev, blk, cnt);
+ mmc_init(mmc);
+ n = mmc->block_dev.block_read(dev, blk, cnt, addr);
+ /* flush cache after read */
+ flush_cache((ulong)addr, cnt * 512);
+ }
+#endif
+
+ /* Upload the Fman microcode if it's present */
+ rc = fman_upload_firmware(index, &reg->fm_imem, addr);
+ if (rc)
+ return rc;
+ sprintf(env_addr, "0x%lx", (long unsigned int)addr);
+ setenv("fman_ucode", env_addr);
+
+ fm_init_muram(index, &reg->muram);
+ fm_init_qmi(&reg->fm_qmi_common);
+ fm_init_fpm(&reg->fm_fpm);
+
+ /* clear DMA status */
+ setbits_be32(&reg->fm_dma.fmdmsr, FMDMSR_CLEAR_ALL);
+
+ /* set DMA mode */
+ setbits_be32(&reg->fm_dma.fmdmmr, FMDMMR_SBER);
+
+ return fm_init_bmi(index, &reg->fm_bmi_common);
+}
diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h
new file mode 100644
index 000000000..228df330f
--- /dev/null
+++ b/drivers/net/fm/fm.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FM_H__
+#define __FM_H__
+
+#include <common.h>
+#include <fm_eth.h>
+#include <asm/fsl_enet.h>
+#include <asm/fsl_fman.h>
+
+/* Port ID */
+#define OH_PORT_ID_BASE 0x01
+#define MAX_NUM_OH_PORT 7
+#define RX_PORT_1G_BASE 0x08
+#define MAX_NUM_RX_PORT_1G CONFIG_SYS_NUM_FM1_DTSEC
+#define RX_PORT_10G_BASE 0x10
+#define TX_PORT_1G_BASE 0x28
+#define MAX_NUM_TX_PORT_1G CONFIG_SYS_NUM_FM1_DTSEC
+#define TX_PORT_10G_BASE 0x30
+
+struct fm_muram {
+ u32 base;
+ u32 top;
+ u32 size;
+ u32 alloc;
+};
+#define FM_MURAM_RES_SIZE 0x01000
+
+/* Rx/Tx buffer descriptor */
+struct fm_port_bd {
+ u16 status;
+ u16 len;
+ u32 res0;
+ u16 res1;
+ u16 buf_ptr_hi;
+ u32 buf_ptr_lo;
+};
+
+/* Common BD flags */
+#define BD_LAST 0x0800
+
+/* Rx BD status flags */
+#define RxBD_EMPTY 0x8000
+#define RxBD_LAST BD_LAST
+#define RxBD_FIRST 0x0400
+#define RxBD_PHYS_ERR 0x0008
+#define RxBD_SIZE_ERR 0x0004
+#define RxBD_ERROR (RxBD_PHYS_ERR | RxBD_SIZE_ERR)
+
+/* Tx BD status flags */
+#define TxBD_READY 0x8000
+#define TxBD_LAST BD_LAST
+
+/* Rx/Tx queue descriptor */
+struct fm_port_qd {
+ u16 gen;
+ u16 bd_ring_base_hi;
+ u32 bd_ring_base_lo;
+ u16 bd_ring_size;
+ u16 offset_in;
+ u16 offset_out;
+ u16 res0;
+ u32 res1[0x4];
+};
+
+/* IM global parameter RAM */
+struct fm_port_global_pram {
+ u32 mode; /* independent mode register */
+ u32 rxqd_ptr; /* Rx queue descriptor pointer */
+ u32 txqd_ptr; /* Tx queue descriptor pointer */
+ u16 mrblr; /* max Rx buffer length */
+ u16 rxqd_bsy_cnt; /* RxQD busy counter, should be cleared */
+ u32 res0[0x4];
+ struct fm_port_qd rxqd; /* Rx queue descriptor */
+ struct fm_port_qd txqd; /* Tx queue descriptor */
+ u32 res1[0x28];
+};
+
+#define FM_PRAM_SIZE sizeof(struct fm_port_global_pram)
+#define FM_PRAM_ALIGN 256
+#define PRAM_MODE_GLOBAL 0x20000000
+#define PRAM_MODE_GRACEFUL_STOP 0x00800000
+
+#if defined(CONFIG_P1017) || defined(CONFIG_P1023)
+#define FM_FREE_POOL_SIZE 0x2000 /* 8K bytes */
+#else
+#define FM_FREE_POOL_SIZE 0x20000 /* 128K bytes */
+#endif
+#define FM_FREE_POOL_ALIGN 256
+
+u32 fm_muram_alloc(int fm_idx, u32 size, u32 align);
+u32 fm_muram_base(int fm_idx);
+int fm_init_common(int index, struct ccsr_fman *reg);
+int fm_eth_initialize(struct ccsr_fman *reg, struct fm_eth_info *info);
+phy_interface_t fman_port_enet_if(enum fm_port port);
+void fman_disable_port(enum fm_port port);
+
+struct fsl_enet_mac {
+ void *base; /* MAC controller registers base address */
+ void *phyregs;
+ int max_rx_len;
+ void (*init_mac)(struct fsl_enet_mac *mac);
+ void (*enable_mac)(struct fsl_enet_mac *mac);
+ void (*disable_mac)(struct fsl_enet_mac *mac);
+ void (*set_mac_addr)(struct fsl_enet_mac *mac, u8 *mac_addr);
+ void (*set_if_mode)(struct fsl_enet_mac *mac, phy_interface_t type,
+ int speed);
+};
+
+/* Fman ethernet private struct */
+struct fm_eth {
+ int fm_index; /* Fman index */
+ u32 num; /* 0..n-1 for give type */
+ struct fm_bmi_tx_port *tx_port;
+ struct fm_bmi_rx_port *rx_port;
+ enum fm_eth_type type; /* 1G or 10G ethernet */
+ phy_interface_t enet_if;
+ struct fsl_enet_mac *mac; /* MAC controller */
+ struct mii_dev *bus;
+ struct phy_device *phydev;
+ int phyaddr;
+ struct eth_device *dev;
+ int max_rx_len;
+ struct fm_port_global_pram *rx_pram; /* Rx parameter table */
+ struct fm_port_global_pram *tx_pram; /* Tx parameter table */
+ void *rx_bd_ring; /* Rx BD ring base */
+ void *cur_rxbd; /* current Rx BD */
+ void *rx_buf; /* Rx buffer base */
+ void *tx_bd_ring; /* Tx BD ring base */
+ void *cur_txbd; /* current Tx BD */
+};
+
+#define RX_BD_RING_SIZE 8
+#define TX_BD_RING_SIZE 8
+#define MAX_RXBUF_LOG2 11
+#define MAX_RXBUF_LEN (1 << MAX_RXBUF_LOG2)
+
+#endif /* __FM_H__ */
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
new file mode 100644
index 000000000..512d7dd3d
--- /dev/null
+++ b/drivers/net/fm/init.c
@@ -0,0 +1,216 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fsl_serdes.h>
+
+#include "fm.h"
+
+struct fm_eth_info fm_info[] = {
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 1)
+ FM_DTSEC_INFO_INITIALIZER(1, 1),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 2)
+ FM_DTSEC_INFO_INITIALIZER(1, 2),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 3)
+ FM_DTSEC_INFO_INITIALIZER(1, 3),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 4)
+ FM_DTSEC_INFO_INITIALIZER(1, 4),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 5)
+ FM_DTSEC_INFO_INITIALIZER(1, 5),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 1)
+ FM_DTSEC_INFO_INITIALIZER(2, 1),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 2)
+ FM_DTSEC_INFO_INITIALIZER(2, 2),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 3)
+ FM_DTSEC_INFO_INITIALIZER(2, 3),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 4)
+ FM_DTSEC_INFO_INITIALIZER(2, 4),
+#endif
+#if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
+ FM_TGEC_INFO_INITIALIZER(1, 1),
+#endif
+#if (CONFIG_SYS_NUM_FM2_10GEC >= 1)
+ FM_TGEC_INFO_INITIALIZER(2, 1),
+#endif
+};
+
+int fm_standard_init(bd_t *bis)
+{
+ int i;
+ struct ccsr_fman *reg;
+
+ reg = (void *)CONFIG_SYS_FSL_FM1_ADDR;
+ if (fm_init_common(0, reg))
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
+ if ((fm_info[i].enabled) && (fm_info[i].index == 1))
+ fm_eth_initialize(reg, &fm_info[i]);
+ }
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ reg = (void *)CONFIG_SYS_FSL_FM2_ADDR;
+ if (fm_init_common(1, reg))
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
+ if ((fm_info[i].enabled) && (fm_info[i].index == 2))
+ fm_eth_initialize(reg, &fm_info[i]);
+ }
+#endif
+
+ return 1;
+}
+
+/* simple linear search to map from port to array index */
+static int fm_port_to_index(enum fm_port port)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
+ if (fm_info[i].port == port)
+ return i;
+ }
+
+ return -1;
+}
+
+/*
+ * Determine if an interface is actually active based on HW config
+ * we expect fman_port_enet_if() to report PHY_INTERFACE_MODE_NONE if
+ * the interface is not active based on HW cfg of the SoC
+ */
+void fman_enet_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
+ phy_interface_t enet_if;
+
+ enet_if = fman_port_enet_if(fm_info[i].port);
+ if (enet_if != PHY_INTERFACE_MODE_NONE) {
+ fm_info[i].enabled = 1;
+ fm_info[i].enet_if = enet_if;
+ } else {
+ fm_info[i].enabled = 0;
+ }
+ }
+
+ return ;
+}
+
+void fm_disable_port(enum fm_port port)
+{
+ int i = fm_port_to_index(port);
+
+ fm_info[i].enabled = 0;
+ fman_disable_port(port);
+}
+
+void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus)
+{
+ int i = fm_port_to_index(port);
+
+ if (i == -1)
+ return;
+
+ fm_info[i].bus = bus;
+}
+
+void fm_info_set_phy_address(enum fm_port port, int address)
+{
+ int i = fm_port_to_index(port);
+
+ if (i == -1)
+ return;
+
+ fm_info[i].phy_addr = address;
+}
+
+/*
+ * Returns the type of the data interface between the given MAC and its PHY.
+ * This is typically determined by the RCW.
+ */
+phy_interface_t fm_info_get_enet_if(enum fm_port port)
+{
+ int i = fm_port_to_index(port);
+
+ if (i == -1)
+ return PHY_INTERFACE_MODE_NONE;
+
+ if (fm_info[i].enabled)
+ return fm_info[i].enet_if;
+
+ return PHY_INTERFACE_MODE_NONE;
+}
+
+static void
+__def_board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
+ enum fm_port port, int offset)
+{
+ return ;
+}
+
+void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
+ enum fm_port port, int offset)
+ __attribute__((weak, alias("__def_board_ft_fman_fixup_port")));
+
+static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
+{
+ int off, ph;
+ phys_addr_t paddr = CONFIG_SYS_CCSRBAR_PHYS + info->compat_offset;
+
+ off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
+
+ if (info->enabled) {
+ fdt_fixup_phy_connection(blob, off, info->enet_if);
+ board_ft_fman_fixup_port(blob, prop, paddr, info->port, off);
+ return ;
+ }
+
+ /* board code might have caused offset to change */
+ off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
+
+ /* disable both the mac node and the node that has a handle to it */
+ fdt_setprop_string(blob, off, "status", "disabled");
+
+ ph = fdt_get_phandle(blob, off);
+ do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
+ "status", "disabled", strlen("disabled") + 1, 1);
+}
+
+void fdt_fixup_fman_ethernet(void *blob)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
+ if (fm_info[i].type == FM_ETH_1G_E)
+ ft_fixup_port(blob, &fm_info[i], "fsl,fman-1g-mac");
+ else
+ ft_fixup_port(blob, &fm_info[i], "fsl,fman-10g-mac");
+ }
+}
diff --git a/drivers/net/fm/p1023.c b/drivers/net/fm/p1023.c
new file mode 100644
index 000000000..b17dc40b8
--- /dev/null
+++ b/drivers/net/fm/p1023.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = MPC85xx_DEVDISR_TSEC1,
+ [FM1_DTSEC2] = MPC85xx_DEVDISR_TSEC2,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 devdisr = in_be32(&gur->devdisr);
+
+ return port_to_devdisr[port] & devdisr;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ setbits_be32(&gur->devdisr, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 pordevsr = in_be32(&gur->pordevsr);
+
+ if (is_device_disabled(port))
+ return PHY_INTERFACE_MODE_NONE;
+
+ /* DTSEC1 can be SGMII, RGMII or RMII */
+ if (port == FM1_DTSEC1) {
+ if (is_serdes_configured(SGMII_FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ if (pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS) {
+ if (pordevsr & MPC85xx_PORDEVSR_TSEC1_PRTC)
+ return PHY_INTERFACE_MODE_RGMII;
+ else
+ return PHY_INTERFACE_MODE_RMII;
+ }
+ }
+
+ /* DTSEC2 only supports SGMII or RGMII */
+ if (port == FM1_DTSEC2) {
+ if (is_serdes_configured(SGMII_FM1_DTSEC2))
+ return PHY_INTERFACE_MODE_SGMII;
+ if (pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)
+ return PHY_INTERFACE_MODE_RGMII;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/net/fm/p3060.c b/drivers/net/fm/p3060.c
new file mode 100644
index 000000000..b25bca7cc
--- /dev/null
+++ b/drivers/net/fm/p3060.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+ [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+ [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+ [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+ [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1,
+ [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2,
+ [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3,
+ [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+
+ return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
+ u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+
+ if (is_device_disabled(port))
+ return PHY_INTERFACE_MODE_NONE;
+
+ /* handle RGMII/MII first */
+ if ((port == FM1_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) ==
+ FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM1_DTSEC2) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
+ FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM2_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
+ FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM1_DTSEC4) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1_EXT) ==
+ FSL_CORENET_RCWSR13_EC1_EXT_FM1_DTSEC4_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM1_DTSEC4) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1_EXT) ==
+ FSL_CORENET_RCWSR13_EC1_EXT_FM1_DTSEC4_MII))
+ return PHY_INTERFACE_MODE_MII;
+
+ if ((port == FM2_DTSEC4) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2_EXT) ==
+ FSL_CORENET_RCWSR13_EC2_EXT_FM2_DTSEC4_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM2_DTSEC4) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2_EXT) ==
+ FSL_CORENET_RCWSR13_EC2_EXT_FM2_DTSEC4_MII))
+ return PHY_INTERFACE_MODE_MII;
+
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ case FM1_DTSEC3:
+ case FM1_DTSEC4:
+ if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ case FM2_DTSEC1:
+ case FM2_DTSEC2:
+ case FM2_DTSEC3:
+ case FM2_DTSEC4:
+ if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/net/fm/p4080.c b/drivers/net/fm/p4080.c
new file mode 100644
index 000000000..791caab7e
--- /dev/null
+++ b/drivers/net/fm/p4080.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+ [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+ [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+ [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+ [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1,
+ [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1,
+ [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2,
+ [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3,
+ [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4,
+ [FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+
+ return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
+
+ if (is_device_disabled(port))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if ((port == FM1_10GEC1) && (is_serdes_configured(XAUI_FM1)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ if ((port == FM2_10GEC1) && (is_serdes_configured(XAUI_FM2)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ /* handle RGMII first */
+ if ((port == FM1_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) ==
+ FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM1_DTSEC2) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
+ FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM2_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
+ FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ case FM1_DTSEC3:
+ case FM1_DTSEC4:
+ if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ case FM2_DTSEC1:
+ case FM2_DTSEC2:
+ case FM2_DTSEC3:
+ case FM2_DTSEC4:
+ if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/net/fm/p5020.c b/drivers/net/fm/p5020.c
new file mode 100644
index 000000000..69c27d223
--- /dev/null
+++ b/drivers/net/fm/p5020.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+ [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+ [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+ [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+ [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5,
+ [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+
+ return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
+
+ if (is_device_disabled(port))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if ((port == FM1_10GEC1) && (is_serdes_configured(XAUI_FM1)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ /* handle RGMII first */
+ if ((port == FM1_DTSEC4) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) ==
+ FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM1_DTSEC4) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) ==
+ FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_MII))
+ return PHY_INTERFACE_MODE_MII;
+
+ if ((port == FM1_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
+ FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM1_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
+ FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII))
+ return PHY_INTERFACE_MODE_MII;
+
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ case FM1_DTSEC3:
+ case FM1_DTSEC4:
+ case FM1_DTSEC5:
+ if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/net/fm/tgec.c b/drivers/net/fm/tgec.c
new file mode 100644
index 000000000..6c1d47119
--- /dev/null
+++ b/drivers/net/fm/tgec.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* MAXFRM - maximum frame length */
+#define MAXFRM_MASK 0x0000ffff
+
+#include <common.h>
+#include <phy.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/fsl_enet.h>
+#include <asm/fsl_tgec.h>
+
+#include "fm.h"
+
+#define TGEC_CMD_CFG_INIT (TGEC_CMD_CFG_NO_LEN_CHK | \
+ TGEC_CMD_CFG_RX_ER_DISC | \
+ TGEC_CMD_CFG_STAT_CLR | \
+ TGEC_CMD_CFG_PAUSE_IGNORE | \
+ TGEC_CMD_CFG_CRC_FWD)
+#define TGEC_CMD_CFG_FINAL (TGEC_CMD_CFG_NO_LEN_CHK | \
+ TGEC_CMD_CFG_RX_ER_DISC | \
+ TGEC_CMD_CFG_PAUSE_IGNORE | \
+ TGEC_CMD_CFG_CRC_FWD)
+
+static void tgec_init_mac(struct fsl_enet_mac *mac)
+{
+ struct tgec *regs = mac->base;
+
+ /* mask all interrupt */
+ out_be32(&regs->imask, IMASK_MASK_ALL);
+
+ /* clear all events */
+ out_be32(&regs->ievent, IEVENT_CLEAR_ALL);
+
+ /* set the max receive length */
+ out_be32(&regs->maxfrm, mac->max_rx_len & MAXFRM_MASK);
+
+ /*
+ * 1588 disable, insert second mac disable payload length check
+ * disable, normal operation, any rx error frame is discarded, clear
+ * counters, pause frame ignore, no promiscuous, LAN mode Rx CRC no
+ * strip, Tx CRC append, Rx disable and Tx disable
+ */
+ out_be32(&regs->command_config, TGEC_CMD_CFG_INIT);
+ udelay(1000);
+ out_be32(&regs->command_config, TGEC_CMD_CFG_FINAL);
+
+ /* multicast frame reception for the hash entry disable */
+ out_be32(&regs->hashtable_ctrl, 0);
+}
+
+static void tgec_enable_mac(struct fsl_enet_mac *mac)
+{
+ struct tgec *regs = mac->base;
+
+ setbits_be32(&regs->command_config, TGEC_CMD_CFG_RXTX_EN);
+}
+
+static void tgec_disable_mac(struct fsl_enet_mac *mac)
+{
+ struct tgec *regs = mac->base;
+
+ clrbits_be32(&regs->command_config, TGEC_CMD_CFG_RXTX_EN);
+}
+
+static void tgec_set_mac_addr(struct fsl_enet_mac *mac, u8 *mac_addr)
+{
+ struct tgec *regs = mac->base;
+ u32 mac_addr0, mac_addr1;
+
+ /*
+ * if a station address of 0x12345678ABCD, perform a write to
+ * MAC_ADDR0 of 0x78563412, MAC_ADDR1 of 0x0000CDAB
+ */
+ mac_addr0 = (mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+ (mac_addr[1] << 8) | (mac_addr[0]);
+ out_be32(&regs->mac_addr_0, mac_addr0);
+
+ mac_addr1 = ((mac_addr[5] << 8) | mac_addr[4]) & 0x0000ffff;
+ out_be32(&regs->mac_addr_1, mac_addr1);
+}
+
+static void tgec_set_interface_mode(struct fsl_enet_mac *mac,
+ phy_interface_t type, int speed)
+{
+ /* nothing right now */
+ return;
+}
+
+void init_tgec(struct fsl_enet_mac *mac, void *base,
+ void *phyregs, int max_rx_len)
+{
+ mac->base = base;
+ mac->phyregs = phyregs;
+ mac->max_rx_len = max_rx_len;
+ mac->init_mac = tgec_init_mac;
+ mac->enable_mac = tgec_enable_mac;
+ mac->disable_mac = tgec_disable_mac;
+ mac->set_mac_addr = tgec_set_mac_addr;
+ mac->set_if_mode = tgec_set_interface_mode;
+}
diff --git a/drivers/net/fm/tgec_phy.c b/drivers/net/fm/tgec_phy.c
new file mode 100644
index 000000000..2d349ad03
--- /dev/null
+++ b/drivers/net/fm/tgec_phy.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Andy Fleming <afleming@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ * Some part is taken from tsec.c
+ */
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/io.h>
+#include <asm/fsl_tgec.h>
+#include <fm_eth.h>
+
+/*
+ * Write value to the PHY for this device to the register at regnum, waiting
+ * until the write is done before it returns. All PHY configuration has to be
+ * done through the TSEC1 MIIM regs
+ */
+int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum, u16 value)
+{
+ u32 mdio_ctl;
+ u32 stat_val;
+ struct tgec_mdio_controller *regs = bus->priv;
+
+ if (dev_addr == MDIO_DEVAD_NONE)
+ return 0;
+
+ /* Wait till the bus is free */
+ stat_val = MDIO_STAT_CLKDIV(100);
+ out_be32(&regs->mdio_stat, stat_val);
+ while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Set the port and dev addr */
+ mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+ out_be32(&regs->mdio_ctl, mdio_ctl);
+
+ /* Set the register address */
+ out_be32(&regs->mdio_addr, regnum & 0xffff);
+
+ /* Wait till the bus is free */
+ while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Write the value to the register */
+ out_be32(&regs->mdio_data, MDIO_DATA(value));
+
+ /* Wait till the MDIO write is complete */
+ while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+ ;
+
+ return 0;
+}
+
+/*
+ * Reads from register regnum in the PHY for device dev, returning the value.
+ * Clears miimcom first. All PHY configuration has to be done through the
+ * TSEC1 MIIM regs
+ */
+int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum)
+{
+ u32 mdio_ctl;
+ u32 stat_val;
+ struct tgec_mdio_controller *regs = bus->priv;
+
+ if (dev_addr == MDIO_DEVAD_NONE)
+ return 0xffff;
+
+ stat_val = MDIO_STAT_CLKDIV(100);
+ out_be32(&regs->mdio_stat, stat_val);
+ /* Wait till the bus is free */
+ while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Set the Port and Device Addrs */
+ mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+ out_be32(&regs->mdio_ctl, mdio_ctl);
+
+ /* Set the register address */
+ out_be32(&regs->mdio_addr, regnum & 0xffff);
+
+ /* Wait till the bus is free */
+ while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Initiate the read */
+ mdio_ctl |= MDIO_CTL_READ;
+ out_be32(&regs->mdio_ctl, mdio_ctl);
+
+ /* Wait till the MDIO write is complete */
+ while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+ ;
+
+ /* Return all Fs if nothing was there */
+ if (in_be32(&regs->mdio_stat) & MDIO_STAT_RD_ER)
+ return 0xffff;
+
+ return in_be32(&regs->mdio_data) & 0xffff;
+}
+
+int tgec_mdio_reset(struct mii_dev *bus)
+{
+ return 0;
+}
+
+int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info)
+{
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate FM TGEC MDIO bus\n");
+ return -1;
+ }
+
+ bus->read = tgec_mdio_read;
+ bus->write = tgec_mdio_write;
+ bus->reset = tgec_mdio_reset;
+ sprintf(bus->name, info->name);
+
+ bus->priv = info->regs;
+
+ return mdio_register(bus);
+}
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 6e0043a50..5a65d9271 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2009, 2011 Freescale Semiconductor, Inc.
*
* (C) Copyright 2008, Excito Elektronik i Sk=E5ne AB
*
@@ -26,6 +26,7 @@
#include <usb.h>
#include <asm/io.h>
#include <usb/ehci-fsl.h>
+#include <hwconfig.h>
#include "ehci.h"
#include "ehci-core.h"
@@ -39,6 +40,11 @@
int ehci_hcd_init(void)
{
struct usb_ehci *ehci;
+ char usb_phy[5];
+ const char *phy_type = NULL;
+ size_t len;
+
+ usb_phy[0] = '\0';
ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB_ADDR;
hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
@@ -52,10 +58,37 @@ int ehci_hcd_init(void)
out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
/* Init phy */
- if (!strcmp(getenv("usb_phy_type"), "utmi"))
- out_le32(&(hcor->or_portsc[0]), PORT_PTS_UTMI);
+ if (hwconfig_sub("usb1", "phy_type"))
+ phy_type = hwconfig_subarg("usb1", "phy_type", &len);
else
+ phy_type = getenv("usb_phy_type");
+
+ if (!phy_type) {
+#ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+ /* if none specified assume internal UTMI */
+ strcpy(usb_phy, "utmi");
+ phy_type = usb_phy;
+#else
+ printf("WARNING: USB phy type not defined !!\n");
+ return -1;
+#endif
+ }
+
+ if (!strcmp(phy_type, "utmi")) {
+#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
+ setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI);
+ setbits_be32(&ehci->control, UTMI_PHY_EN);
+ udelay(1000); /* delay required for PHY Clk to appear */
+#endif
+ out_le32(&(hcor->or_portsc[0]), PORT_PTS_UTMI);
+ } else {
+#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
+ clrbits_be32(&ehci->control, UTMI_PHY_EN);
+ setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI);
+ udelay(1000); /* delay required for PHY Clk to appear */
+#endif
out_le32(&(hcor->or_portsc[0]), PORT_PTS_ULPI);
+ }
/* Enable interface. */
setbits_be32(&ehci->control, USB_EN);
diff --git a/include/common.h b/include/common.h
index d244bd40b..bcc00e82b 100644
--- a/include/common.h
+++ b/include/common.h
@@ -485,7 +485,22 @@ void ddr_enable_ecc(unsigned int dram_size);
#endif
/* $(CPU)/cpu.c */
+static inline int cpumask_next(int cpu, unsigned int mask)
+{
+ for (cpu++; !((1 << cpu) & mask); cpu++)
+ ;
+
+ return cpu;
+}
+
+#define for_each_cpu(iter, cpu, num_cpus, mask) \
+ for (iter = 0, cpu = cpumask_next(-1, mask); \
+ iter < num_cpus; \
+ iter++, cpu = cpumask_next(cpu, mask)) \
+
int cpu_numcores (void);
+u32 cpu_mask (void);
+int is_core_valid (unsigned int);
int probecpu (void);
int checkcpu (void);
int checkicache (void);
@@ -565,10 +580,12 @@ ulong get_PERCLK3(void);
ulong get_bus_freq (ulong);
int get_serial_clock(void);
+#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
+ulong get_ddr_freq(ulong);
+#endif
#if defined(CONFIG_MPC85xx)
typedef MPC85xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
-ulong get_ddr_freq (ulong);
#endif
#if defined(CONFIG_MPC86xx)
typedef MPC86xx_SYS_INFO sys_info_t;
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 45b6b5f85..da2b11da8 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -78,6 +78,22 @@
#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
/*
+ * define CONFIG_FSL_DDR2 to use unified DDR driver
+ * undefine it to use old spd_sdram.c
+ */
+#define CONFIG_FSL_DDR2
+#ifdef CONFIG_FSL_DDR2
+#define CONFIG_SYS_SPD_BUS_NUM 0
+#define SPD_EEPROM_ADDRESS1 0x52
+#define SPD_EEPROM_ADDRESS2 0x51
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_DIMM_SLOTS_PER_CTLR 2
+#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#endif
+
+/*
* 32-bit data path mode.
*
* Please note that using this mode for devices with the real density of 64-bit
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 783ed518e..f3d325a0c 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -127,22 +127,11 @@
#define CONFIG_SYS_L2_SIZE (512 << 10)
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull /* physical addr of CCSRBAR */
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
-#endif
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
#if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
#endif
/* DDR Setup */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index e1d933ec4..fc0edaced 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -89,15 +89,8 @@
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR1
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 5918e644d..ae19036d8 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -62,14 +62,8 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR1
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index b25fb55a4..6b03d2741 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -74,14 +74,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_MEMTEST_END 0x00400000
#define CONFIG_PANIC_HANG /* do not reset board on panic */
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR2
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index c9a0f6058..aca77ff6b 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -77,14 +77,8 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR2
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 4c580a37e..93d4c3e5f 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -62,14 +62,8 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR1
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index f55ef9d79..e03fea3cc 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -86,15 +86,8 @@
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR1
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index f7df7f038..cf0ea47e7 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -71,14 +71,8 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR2
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index fa626bb97..dd7278c4b 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -105,20 +105,11 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_L2_SIZE (512 << 10)
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
- /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
- /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
#if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
#endif
/* DDR Setup */
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index bb8fb669c..6067e6085 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -112,22 +112,11 @@
#define CONFIG_SYS_L2_SIZE (512 << 10)
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull /* physical addr of CCSRBAR */
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#endif
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
#if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
#endif
/* DDR Setup */
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
new file mode 100644
index 000000000..ca6178a13
--- /dev/null
+++ b/include/configs/P1010RDB.h
@@ -0,0 +1,776 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * P010 RDB board configuration file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifdef CONFIG_36BIT
+#define CONFIG_PHYS_64BIT
+#endif
+
+#ifdef CONFIG_P1010RDB
+#define CONFIG_P1010
+#define CONFIG_NAND_FSL_IFC
+#endif
+
+#ifdef CONFIG_SDCARD
+#define CONFIG_RAMBOOT_SDCARD
+#define CONFIG_SYS_TEXT_BASE 0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
+#endif
+
+#ifdef CONFIG_SPIFLASH
+#define CONFIG_RAMBOOT_SPIFLASH
+#define CONFIG_SYS_TEXT_BASE 0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
+#endif
+
+#ifdef CONFIG_NAND /* NAND Boot */
+#define CONFIG_RAMBOOT_NAND
+#define CONFIG_NAND_U_BOOT
+#define CONFIG_SYS_TEXT_BASE_SPL 0xff800000
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL
+#else
+#define CONFIG_SYS_TEXT_BASE 0x11001000
+#endif /* CONFIG_NAND_SPL */
+#endif
+
+
+#ifdef CONFIG_NAND_SECBOOT /* NAND Boot */
+#define CONFIG_RAMBOOT_NAND
+#define CONFIG_SYS_TEXT_BASE 0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
+#endif
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0xeff80000
+#endif
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
+#endif
+
+#ifndef CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#endif
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE /* BOOKE */
+#define CONFIG_E500 /* BOOKE e500 family */
+#define CONFIG_MPC85xx
+#define CONFIG_FSL_IFC /* Enable IFC Support */
+#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
+
+#define CONFIG_PCI /* Enable PCI/PCIE */
+#if defined(CONFIG_PCI)
+#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
+#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+
+#define CONFIG_E1000 /* E1000 pci Ethernet card*/
+
+/*
+ * PCI Windows
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+/* controller 1, Slot 1, tgtid 1, Base address a000 */
+#define CONFIG_SYS_PCIE1_NAME "mini PCIe Slot"
+#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
+#else
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
+#endif
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
+#else
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
+#endif
+
+/* controller 2, Slot 2, tgtid 2, Base address 9000 */
+#define CONFIG_SYS_PCIE2_NAME "PCIe Slot"
+#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
+#else
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
+#endif
+#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
+#else
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
+#endif
+
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_FSL_LAW /* Use common FSL init code */
+#define CONFIG_TSEC_ENET
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1010 RDB */
+#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */
+
+#ifndef CONFIG_SDCARD
+#define CONFIG_MISC_INIT_R
+#endif
+
+#define CONFIG_HWCONFIG
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+
+#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+
+#define CONFIG_ENABLE_36BIT_PHYS
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP 1
+#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
+#endif
+
+#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x1fffffff
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+
+/* DDR Setup */
+#define CONFIG_FSL_DDR3
+#define CONFIG_DDR_RAW_TIMING
+#define CONFIG_DDR_SPD
+#define CONFIG_SYS_SPD_BUS_NUM 1
+#define SPD_EEPROM_ADDRESS 0x52
+
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_sdram_size(void);
+#endif
+#define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_CHIP_SELECTS_PER_CTRL 1
+
+/* DDR3 Controller Settings */
+#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
+#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
+#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
+#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
+#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
+#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
+#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
+
+#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
+#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
+#define CONFIG_SYS_DDR_RCW_1 0x00000000
+#define CONFIG_SYS_DDR_RCW_2 0x00000000
+#define CONFIG_SYS_DDR_CONTROL 0x470C0000 /* Type = DDR3 */
+#define CONFIG_SYS_DDR_CONTROL_2 0x04401010
+#define CONFIG_SYS_DDR_TIMING_4 0x00000001
+#define CONFIG_SYS_DDR_TIMING_5 0x03402400
+
+#define CONFIG_SYS_DDR_TIMING_3_800 0x00020000
+#define CONFIG_SYS_DDR_TIMING_0_800 0x00330004
+#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6B4644
+#define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF
+#define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000
+#define CONFIG_SYS_DDR_MODE_1_800 0x40461520
+#define CONFIG_SYS_DDR_MODE_2_800 0x8000c000
+#define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100
+#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8655A608
+
+/* settings for DDR3 at 667MT/s */
+#define CONFIG_SYS_DDR_TIMING_3_667 0x00010000
+#define CONFIG_SYS_DDR_TIMING_0_667 0x00110004
+#define CONFIG_SYS_DDR_TIMING_1_667 0x5d59e544
+#define CONFIG_SYS_DDR_TIMING_2_667 0x0FA890CD
+#define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000
+#define CONFIG_SYS_DDR_MODE_1_667 0x00441210
+#define CONFIG_SYS_DDR_MODE_2_667 0x00000000
+#define CONFIG_SYS_DDR_INTERVAL_667 0x0a280000
+#define CONFIG_SYS_DDR_WRLVL_CONTROL_667 0x8675F608
+
+#define CONFIG_SYS_CCSRBAR 0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
+
+/* Don't relocate CCSRBAR while in NAND_SPL */
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#endif
+
+/*
+ * Memory map
+ *
+ * 0x0000_0000 0x3fff_ffff DDR 1G cacheable
+ * 0x8000_0000 0xbfff_ffff PCI Express Mem 1.5G non-cacheable
+ * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
+ *
+ * Localbus non-cacheable
+ * 0xff80_0000 0xff8f_ffff NAND Flash 1M non-cacheable
+ * 0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable
+ * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
+ * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
+ */
+
+/* In case of SD card boot, IFC interface is not available because of muxing */
+#ifdef CONFIG_SDCARD
+#define CONFIG_SYS_NO_FLASH
+#else
+/*
+ * IFC Definitions
+ */
+/* NOR Flash on IFC */
+#define CONFIG_SYS_FLASH_BASE 0xee000000
+#define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+#endif
+
+#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR_AMASK IFC_AMASK(32*1024*1024)
+#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(7)
+/* NOR Flash Timing Params */
+#define CONFIG_SYS_NOR_FTIM0 FTIM0_NOR_TACSE(0x4) | \
+ FTIM0_NOR_TEADC(0x5) | \
+ FTIM0_NOR_TEAHC(0x5)
+#define CONFIG_SYS_NOR_FTIM1 FTIM1_NOR_TACO(0x1e) | \
+ FTIM1_NOR_TRAD_NOR(0x0f)
+#define CONFIG_SYS_NOR_FTIM2 FTIM2_NOR_TCS(0x4) | \
+ FTIM2_NOR_TCH(0x4) | \
+ FTIM2_NOR_TWP(0x1c)
+#define CONFIG_SYS_NOR_FTIM3 0x0
+
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+/* CFI for NOR Flash */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+/* NAND Flash on IFC */
+#define CONFIG_SYS_NAND_BASE 0xff800000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+#endif
+
+#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_NAND \
+ | CSPR_V)
+#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
+#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
+ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
+ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
+ | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \
+ | CSOR_NAND_PGS_512 /* Page Size = 512b */ \
+ | CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \
+ | CSOR_NAND_PB(32)) /* 32 Pages Per Block */
+
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
+
+/* NAND Flash Timing Params */
+#define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \
+ FTIM0_NAND_TWP(0x0C) | \
+ FTIM0_NAND_TWCHT(0x04) | \
+ FTIM0_NAND_TWH(0x05)
+#define CONFIG_SYS_NAND_FTIM1 FTIM1_NAND_TADLE(0x1d) | \
+ FTIM1_NAND_TWBE(0x1d) | \
+ FTIM1_NAND_TRR(0x07) | \
+ FTIM1_NAND_TRP(0x0c)
+#define CONFIG_SYS_NAND_FTIM2 FTIM2_NAND_TRAD(0x0c) | \
+ FTIM2_NAND_TREH(0x05) | \
+ FTIM2_NAND_TWHRE(0x0f)
+#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04)
+
+#define CONFIG_SYS_NAND_DDR_LAW 11
+
+/* Set up IFC registers for boot location NOR/NAND */
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SECBOOT)
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#else
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
+#endif
+
+/* NAND boot: 8K NAND loader config */
+#define CONFIG_SYS_NAND_SPL_SIZE 0x2000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_START 0x11000000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (0)
+#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x10000
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
+
+/* CPLD on IFC */
+#define CONFIG_SYS_CPLD_BASE 0xffb00000
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull
+#else
+#define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
+#endif
+
+#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_GPCM \
+ | CSPR_V)
+#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024)
+#define CONFIG_SYS_CSOR3 0x0
+/* CPLD Timing parameters for IFC CS3 */
+#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
+ FTIM0_GPCM_TEADC(0x0e) | \
+ FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \
+ FTIM1_GPCM_TRAD(0x1f))
+#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
+ FTIM2_GPCM_TCH(0x0) | \
+ FTIM2_GPCM_TWP(0x1f))
+#define CONFIG_SYS_CS3_FTIM3 0x0
+#endif /* CONFIG_SDCARD */
+
+#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
+ defined(CONFIG_RAMBOOT_NAND)
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#else
+#undef CONFIG_SYS_RAMBOOT
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
+
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
+#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */
+
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \
+ - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
+
+#define CONFIG_SERIAL_MULTI /* Enable both serial ports */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#endif
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address*/
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_SYS_I2C2_OFFSET 0x3100
+
+/* I2C EEPROM */
+#undef CONFIG_ID_EEPROM
+/* enable read and write access to EEPROM */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+/* RTC */
+#define CONFIG_RTC_PT7C4338
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+
+#define CONFIG_CMD_I2C
+
+/*
+ * SPI interface will not be available in case of NAND boot SPI CS0 will be
+ * used for SLIC
+ */
+#if !defined(CONFIG_NAND_U_BOOT) || !defined(CONFIG_NAND_SECBOOT)
+/* eSPI - Enhanced SPI */
+#define CONFIG_FSL_ESPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED 10000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#endif
+
+#if defined(CONFIG_TSEC_ENET)
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI
+#endif
+
+#define CONFIG_MII /* MII PHY management */
+#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC1"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC2"
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC3"
+
+#define TSEC1_PHY_ADDR 1
+#define TSEC2_PHY_ADDR 0
+#define TSEC3_PHY_ADDR 2
+
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC3_PHYIDX 0
+
+#define CONFIG_ETHPRIME "eTSEC1"
+
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+
+/* TBI PHY configuration for SGMII mode */
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
+ TBICR_PHY_RESET \
+ | TBICR_ANEG_ENABLE \
+ | TBICR_FULL_DUPLEX \
+ | TBICR_SPEED1_SET \
+ )
+
+#endif /* CONFIG_TSEC_ENET */
+
+
+/* SATA */
+#define CONFIG_FSL_SATA
+#define CONFIG_LIBATA
+
+#ifdef CONFIG_FSL_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 2
+#define CONFIG_SATA1
+#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
+#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_SATA2
+#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
+#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
+
+#define CONFIG_CMD_SATA
+#define CONFIG_LBA48
+#endif /* #ifdef CONFIG_FSL_SATA */
+
+/* SD interface will only be available in case of SD boot */
+#ifdef CONFIG_SDCARD
+#define CONFIG_MMC
+#define CONFIG_DEF_HWCONFIG esdhc
+#endif
+
+#ifdef CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_FSL_ESDHC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#endif
+
+#define CONFIG_HAS_FSL_DR_USB
+
+#if defined(CONFIG_HAS_FSL_DR_USB)
+#define CONFIG_USB_EHCI
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_USB_STORAGE
+#endif
+#endif
+
+/*
+ * Environment
+ */
+#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_RAMBOOT_SDCARD)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
+#elif defined(CONFIG_RAMBOOT_SPIFLASH)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 10000000
+#define CONFIG_ENV_SPI_MODE 0
+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#define CONFIG_ENV_SIZE 0x2000
+#elif defined(CONFIG_NAND_U_BOOT)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET CONFIG_SYS_NAND_U_BOOT_SIZE
+#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
+#else
+#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_SIZE 0x2000
+#endif
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR 0xfff80000
+#else
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#endif
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+#endif
+
+#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ERRATA
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
+ || defined(CONFIG_FSL_SATA)
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+ /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#endif
+
+#define CONFIG_HOSTNAME P1010RDB
+#define CONFIG_ROOTPATH /opt/nfsroot
+#define CONFIG_BOOTFILE uImage
+#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 1000000
+
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=" MK_STR(CONFIG_DEF_HWCONFIG) "\0" \
+ "netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "loadaddr=1000000\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=rootfs.ext2.gz.uboot\0" \
+ "fdtaddr=c00000\0" \
+ "fdtfile=p1010rdb.dtb\0" \
+ "bdev=sda1\0" \
+ "hwconfig=usb1:dr_mode=host,phy_type=utmi\0" \
+ "othbootargs=ramdisk_size=600000\0" \
+ "usbfatboot=setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs; " \
+ "usb start;" \
+ "fatload usb 0:2 $loadaddr $bootfile;" \
+ "fatload usb 0:2 $fdtaddr $fdtfile;" \
+ "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
+ "usbext2boot=setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs; " \
+ "usb start;" \
+ "ext2load usb 0:4 $loadaddr $bootfile;" \
+ "ext2load usb 0:4 $fdtaddr $fdtfile;" \
+ "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs; " \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
+
+#ifdef CONFIG_SECURE_BOOT
+#include <asm/fsl_secure_boot.h>
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index a11897552..a3cccf4c3 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -64,18 +64,8 @@
#define CONFIG_SYS_MEMTEST_START 0x00000000
#define CONFIG_SYS_MEMTEST_END 0x7fffffff
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
-#endif
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR 0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_DDR_SPD
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 95f3a2c18..938667497 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -99,15 +99,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_LBC_LBCR 0x00000000 /* Implement conversion of
addresses in the LBC */
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xff600000 /* relocated CCSRBAR */
-/* physical addr of CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
/* DDR Setup */
#define CONFIG_VERY_BIG_RAM
@@ -534,9 +525,9 @@ extern unsigned long get_clock_freq(void);
#ifdef CONFIG_SYS_DPAA_FMAN
#define CONFIG_FMAN_ENET
+#define CONFIG_PHY_MARVELL
#endif
-#define CONFIG_SYS_FMAN_FW
#ifndef CONFIG_NAND
/* Default address of microcode for the Linux Fman driver */
/* QE microcode/firmware address */
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index df88b79bb..043515dbd 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -148,24 +148,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_L2_SIZE (512 << 10)
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
-#endif
- /* CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */
- /* CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
#if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
#endif
/* DDR Setup */
@@ -594,6 +581,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#endif
#endif
+#define CONFIG_HAS_FSL_DR_USB
+
+#if defined(CONFIG_HAS_FSL_DR_USB)
#define CONFIG_USB_EHCI
#ifdef CONFIG_USB_EHCI
@@ -601,7 +591,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_EHCI_FSL
#define CONFIG_USB_STORAGE
-#define CONFIG_HAS_FSL_DR_USB
+#endif
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 90fe7c404..f6b788e57 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -118,18 +118,8 @@
#define CONFIG_SYS_L2_SIZE (512 << 10)
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull /* physical addr of CCSRBAR */
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#endif
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_VERY_BIG_RAM
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 638dbe7a6..c7f076122 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -102,7 +102,10 @@
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
#endif
-#define CONFIG_SYS_CLK_FREQ 66666666
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(unsigned long dummy);
+#endif
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
/*
* These can be toggled for performance analysis, otherwise use default.
@@ -138,20 +141,6 @@
#define CONFIG_SYS_L3_SIZE (1024 << 10)
#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xfe000000 /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS 0xffe000000ull
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
-#endif
-/* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
-
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_DCSRBAR 0xf0000000
#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
@@ -419,7 +408,6 @@
#define CONFIG_SYS_DPAA_FMAN
#define CONFIG_SYS_DPAA_PME
/* Default address of microcode for the Linux Fman driver */
-#define CONFIG_SYS_FMAN_FW
#if defined(CONFIG_SPIFLASH)
/*
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
@@ -443,6 +431,9 @@
#ifdef CONFIG_SYS_DPAA_FMAN
#define CONFIG_FMAN_ENET
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_TERANETICS
#endif
#ifdef CONFIG_PCI
@@ -486,6 +477,8 @@
#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e
#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f
+#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0
+
#define CONFIG_SYS_TBIPA_VALUE 8
#define CONFIG_MII /* MII PHY management */
#define CONFIG_ETHPRIME "FM1@DTSEC1"
diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h
index d9e8f5193..e4d1fe599 100644
--- a/include/configs/P3041DS.h
+++ b/include/configs/P3041DS.h
@@ -28,7 +28,12 @@
#define CONFIG_PHYS_64BIT
#define CONFIG_PPC_P3041
+#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */
+
+#define CONFIG_MMC
+#define CONFIG_NAND_FSL_ELBC
#define CONFIG_FSL_SATA_V2
+#define CONFIG_PCIE3
#define CONFIG_PCIE4
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h
index 49f7c534d..4a2e47513 100644
--- a/include/configs/P4080DS.h
+++ b/include/configs/P4080DS.h
@@ -27,6 +27,11 @@
#define CONFIG_PHYS_64BIT
#define CONFIG_PPC_P4080
+#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */
+
+#define CONFIG_MMC
+#define CONFIG_PCIE3
+
#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 ref clk freq */
#include "corenet_ds.h"
diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h
index dd8d442e3..618d1a40f 100644
--- a/include/configs/P5020DS.h
+++ b/include/configs/P5020DS.h
@@ -28,8 +28,14 @@
#define CONFIG_PHYS_64BIT
#define CONFIG_PPC_P5020
+#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */
+
+#define CONFIG_MMC
+#define CONFIG_NAND_FSL_ELBC
#define CONFIG_FSL_SATA_V2
+#define CONFIG_PCIE3
#define CONFIG_PCIE4
+#define CONFIG_SYS_FSL_RAID_ENGINE
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 72559c0c0..b5612d66c 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -94,20 +94,6 @@
#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
#endif
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-
-#if XXX
- #define CONFIG_SYS_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */
-#else
- #define CONFIG_SYS_CCSRBAR 0xff700000 /* default CCSRBAR */
-#endif
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-
#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */
/* DDR Setup */
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index b336723f5..fe6b72810 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -130,18 +130,12 @@
#define CONFIG_SYS_MEMTEST_START 0x00000000
#define CONFIG_SYS_MEMTEST_END 0x10000000
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xFF700000 /* CCSRBAR Default */
#ifdef CONFIG_TQM_BIGFLASH
-#define CONFIG_SYS_CCSRBAR 0xA0000000 /* relocated CCSRBAR */
-#else /* !CONFIG_TQM_BIGFLASH */
-#define CONFIG_SYS_CCSRBAR 0xE0000000 /* relocated CCSRBAR */
-#endif /* CONFIG_TQM_BIGFLASH */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xA0000000
+#else
+#define CONFIG_SYS_CCSRBAR 0xE0000000
+#endif
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/*
* DDR Setup
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index adf9906bc..4bbca8860 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -56,7 +56,6 @@
#define CONFIG_PCI /* Enable PCI/PCIE */
#define CONFIG_PCIE1 /* PCIE controler 1 */
#define CONFIG_PCIE2 /* PCIE controler 2 */
-#define CONFIG_PCIE3 /* PCIE controler 3 */
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
@@ -144,19 +143,6 @@
#define CONFIG_SYS_L3_SIZE (1024 << 10)
#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xfe000000 /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS 0xffe000000ull /* physical addr of CCSRBAR */
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#endif
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_DCSRBAR 0xf0000000
#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
@@ -212,7 +198,6 @@
(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
#define CONFIG_SYS_OR1_PRELIM 0xf8000ff7
-#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */
#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */
#ifdef CONFIG_PHYS_64BIT
#define PIXIS_BASE_PHYS 0xfffdf0000ull
@@ -243,8 +228,6 @@
#endif
/* Nand Flash */
-#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
-#define CONFIG_NAND_FSL_ELBC
#ifdef CONFIG_NAND_FSL_ELBC
#define CONFIG_SYS_NAND_BASE 0xffa00000
#ifdef CONFIG_PHYS_64BIT
@@ -285,11 +268,10 @@
#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
#endif
-#endif /* CONFIG_NAND_FSL_ELBC */
#else
#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
-#endif
+#endif /* CONFIG_NAND_FSL_ELBC */
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
@@ -487,7 +469,6 @@
#define CONFIG_SYS_DPAA_FMAN
#define CONFIG_SYS_DPAA_PME
/* Default address of microcode for the Linux Fman driver */
-#define CONFIG_SYS_FMAN_FW
#if defined(CONFIG_SPIFLASH)
/*
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
@@ -511,6 +492,9 @@
#ifdef CONFIG_SYS_DPAA_FMAN
#define CONFIG_FMAN_ENET
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_TERANETICS
#endif
#ifdef CONFIG_PCI
@@ -580,6 +564,7 @@
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
#ifdef CONFIG_PCI
#define CONFIG_CMD_PCI
@@ -597,8 +582,6 @@
#define CONFIG_CMD_EXT2
#define CONFIG_HAS_FSL_DR_USB
-#define CONFIG_MMC
-
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
@@ -708,4 +691,8 @@
#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
+#ifdef CONFIG_SECURE_BOOT
+#include <asm/fsl_secure_boot.h>
+#endif
+
#endif /* __CONFIG_H */
diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
index e76ca73d4..f0ed4d108 100644
--- a/include/configs/mpq101.h
+++ b/include/configs/mpq101.h
@@ -64,20 +64,8 @@
#define CONFIG_SYS_CLK_FREQ 33000000 /* sysclk for MPC85xx */
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
-#define CONFIG_SYS_CCSRBAR 0xe0000000
-
-#ifdef CONFIG_PHYS_64BIT
-# define CONFIG_SYS_CCSRBAR_PHYS 0xfe0000000ull
-#else
-# define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
-#endif
-
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR2
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
new file mode 100644
index 000000000..b9b89cfa5
--- /dev/null
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -0,0 +1,984 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * QorIQ RDB boards configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifdef CONFIG_36BIT
+#define CONFIG_PHYS_64BIT
+#endif
+
+#if defined(CONFIG_P1020MBG)
+#define CONFIG_BOARDNAME "P1020MBG"
+#define CONFIG_P1020
+#define CONFIG_VSC7385_ENET
+#define CONFIG_SLIC
+#define __SW_BOOT_MASK 0x03
+#define __SW_BOOT_NOR 0xe4
+#define __SW_BOOT_SD 0x54
+#endif
+
+#if defined(CONFIG_P1020UTM)
+#define CONFIG_BOARDNAME "P1020UTM"
+#define CONFIG_P1020
+#define __SW_BOOT_MASK 0x03
+#define __SW_BOOT_NOR 0xe0
+#define __SW_BOOT_SD 0x50
+#endif
+
+#if defined(CONFIG_P1020RDB)
+#define CONFIG_BOARDNAME "P1020RDB"
+#define CONFIG_NAND_FSL_ELBC
+#define CONFIG_P1020
+#define CONFIG_SPI_FLASH
+#define CONFIG_VSC7385_ENET
+#define CONFIG_SLIC
+#define __SW_BOOT_MASK 0x03
+#define __SW_BOOT_NOR 0x5c
+#define __SW_BOOT_SPI 0x1c
+#define __SW_BOOT_SD 0x9c
+#define __SW_BOOT_NAND 0xec
+#define __SW_BOOT_PCIE 0x6c
+#endif
+
+#if defined(CONFIG_P1021RDB)
+#define CONFIG_BOARDNAME "P1021RDB"
+#define CONFIG_NAND_FSL_ELBC
+#define CONFIG_P1021
+#define CONFIG_QE
+#define CONFIG_SPI_FLASH
+#define CONFIG_VSC7385_ENET
+#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of
+ addresses in the LBC */
+#define __SW_BOOT_MASK 0x03
+#define __SW_BOOT_NOR 0x5c
+#define __SW_BOOT_SPI 0x1c
+#define __SW_BOOT_SD 0x9c
+#define __SW_BOOT_NAND 0xec
+#define __SW_BOOT_PCIE 0x6c
+#endif
+
+#if defined(CONFIG_P1024RDB)
+#define CONFIG_BOARDNAME "P1024RDB"
+#define CONFIG_NAND_FSL_ELBC
+#define CONFIG_P1024
+#define CONFIG_SLIC
+#define CONFIG_SPI_FLASH
+#define __SW_BOOT_MASK 0xf3
+#define __SW_BOOT_NOR 0x00
+#define __SW_BOOT_SPI 0x08
+#define __SW_BOOT_SD 0x04
+#define __SW_BOOT_NAND 0x0c
+#endif
+
+#if defined(CONFIG_P1025RDB)
+#define CONFIG_BOARDNAME "P1025RDB"
+#define CONFIG_NAND_FSL_ELBC
+#define CONFIG_P1025
+#define CONFIG_QE
+#define CONFIG_SLIC
+#define CONFIG_SPI_FLASH
+
+#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of
+ addresses in the LBC */
+#define __SW_BOOT_MASK 0xf3
+#define __SW_BOOT_NOR 0x00
+#define __SW_BOOT_SPI 0x08
+#define __SW_BOOT_SD 0x04
+#define __SW_BOOT_NAND 0x0c
+#endif
+
+#if defined(CONFIG_P2020RDB)
+#define CONFIG_BOARDNAME "P2020RDB"
+#define CONFIG_NAND_FSL_ELBC
+#define CONFIG_P2020
+#define CONFIG_SPI_FLASH
+#define CONFIG_VSC7385_ENET
+#define __SW_BOOT_MASK 0x03
+#define __SW_BOOT_NOR 0xc8
+#define __SW_BOOT_SPI 0x28
+#define __SW_BOOT_SD 0x68 /* or 0x18 */
+#define __SW_BOOT_NAND 0xe8
+#define __SW_BOOT_PCIE 0xa8
+#endif
+
+#ifdef CONFIG_SDCARD
+#define CONFIG_RAMBOOT_SDCARD
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE 0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
+#endif
+
+#ifdef CONFIG_SPIFLASH
+#define CONFIG_RAMBOOT_SPIFLASH
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE 0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
+#endif
+
+#if defined(CONFIG_NAND) && defined(CONFIG_NAND_FSL_ELBC)
+#define CONFIG_NAND_U_BOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_TEXT_BASE_SPL 0xff800000
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL
+#else
+#define CONFIG_SYS_TEXT_BASE 0x11001000
+#endif /* CONFIG_NAND_SPL */
+#endif
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0xeff80000
+#endif
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
+#endif
+
+#ifndef CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#endif
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE
+#define CONFIG_E500
+#define CONFIG_MPC85xx
+
+#define CONFIG_MP
+
+#define CONFIG_FSL_ELBC
+#define CONFIG_PCI
+#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
+#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
+
+#define CONFIG_FSL_LAW
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_CMD_SATA
+#define CONFIG_SATA_SIL3114
+#define CONFIG_SYS_SATA_MAX_DEVICE 2
+#define CONFIG_LIBATA
+#define CONFIG_LBA48
+
+#if defined(CONFIG_P2020RDB)
+#define CONFIG_SYS_CLK_FREQ 100000000
+#else
+#define CONFIG_SYS_CLK_FREQ 66666666
+#endif
+#define CONFIG_DDR_CLK_FREQ 66666666
+
+#define CONFIG_HWCONFIG
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE
+#define CONFIG_BTB
+
+#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ENABLE_36BIT_PHYS
+#endif
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP 1
+#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
+#endif
+
+#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x1fffffff
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+
+#define CONFIG_SYS_CCSRBAR 0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
+
+/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
+ SPL code*/
+#if defined(CONFIG_NAND_U_BOOT) && defined(CONFIG_NAND_SPL)
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#endif
+
+/* DDR Setup */
+#define CONFIG_FSL_DDR3
+#define CONFIG_DDR_RAW_TIMING
+#define CONFIG_DDR_SPD
+#define CONFIG_SYS_SPD_BUS_NUM 1
+#define SPD_EEPROM_ADDRESS 0x52
+#define CONFIG_FSL_DDR_INTERACTIVE
+
+#ifdef CONFIG_P1020MBG
+#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G
+#define CONFIG_CHIP_SELECTS_PER_CTRL 2
+#else
+#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G
+#define CONFIG_CHIP_SELECTS_PER_CTRL 1
+#endif
+#define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+
+/* Default settings for DDR3 */
+#ifdef CONFIG_P2020RDB
+#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
+#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202
+#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
+#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000
+#define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000
+#define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000
+
+#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
+#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
+#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
+#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
+
+#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
+#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8645F607
+#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
+#define CONFIG_SYS_DDR_RCW_1 0x00000000
+#define CONFIG_SYS_DDR_RCW_2 0x00000000
+#define CONFIG_SYS_DDR_CONTROL 0xC7000000 /* Type = DDR3 */
+#define CONFIG_SYS_DDR_CONTROL_2 0x24401000
+#define CONFIG_SYS_DDR_TIMING_4 0x00220001
+#define CONFIG_SYS_DDR_TIMING_5 0x02401400
+
+#define CONFIG_SYS_DDR_TIMING_3 0x00020000
+#define CONFIG_SYS_DDR_TIMING_0 0x00330104
+#define CONFIG_SYS_DDR_TIMING_1 0x6f6B4644
+#define CONFIG_SYS_DDR_TIMING_2 0x0FA88CCF
+#define CONFIG_SYS_DDR_CLK_CTRL 0x02000000
+#define CONFIG_SYS_DDR_MODE_1 0x00421422
+#define CONFIG_SYS_DDR_MODE_2 0x04000000
+#define CONFIG_SYS_DDR_INTERVAL 0x0C300100
+
+#else
+#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
+#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
+#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
+#define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f
+#define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302
+#define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000
+
+#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
+#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
+#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
+#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
+
+#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
+#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608
+#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
+#define CONFIG_SYS_DDR_RCW_1 0x00000000
+#define CONFIG_SYS_DDR_RCW_2 0x00000000
+#define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
+#define CONFIG_SYS_DDR_CONTROL_2 0x04401050
+#define CONFIG_SYS_DDR_TIMING_4 0x00220001
+#define CONFIG_SYS_DDR_TIMING_5 0x03402400
+
+#define CONFIG_SYS_DDR_TIMING_3 0x00020000
+#define CONFIG_SYS_DDR_TIMING_0 0x00330004
+#define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846
+#define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF
+#define CONFIG_SYS_DDR_CLK_CTRL 0x03000000
+#define CONFIG_SYS_DDR_MODE_1 0x40461520
+#define CONFIG_SYS_DDR_MODE_2 0x8000c000
+#define CONFIG_SYS_DDR_INTERVAL 0x0C300000
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/*
+ * Memory map
+ *
+ * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable
+ * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3)
+ * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
+ *
+ * Localbus cacheable (TBD)
+ * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable
+ *
+ * Localbus non-cacheable
+ * 0xec00_0000 0xefff_ffff FLASH Up to 64M non-cacheable
+ * 0xff80_0000 0xff8f_ffff NAND flash 1M non-cacheable
+ * 0xff90_0000 0xff97_ffff L2 SDRAM(REV.) 512K cacheable(optional)
+ * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable
+ * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable
+ * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
+ * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
+ */
+
+
+/*
+ * Local Bus Definitions
+ */
+#if defined(CONFIG_P1020MBG)
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
+#define CONFIG_SYS_FLASH_BASE 0xec000000
+#elif defined(CONFIG_P1020UTM)
+#define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */
+#define CONFIG_SYS_FLASH_BASE 0xee000000
+#else
+#define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */
+#define CONFIG_SYS_FLASH_BASE 0xef000000
+#endif
+
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+#endif
+
+#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS)) \
+ | BR_PS_16 | BR_V)
+
+#define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
+
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+/* Nand Flash */
+#ifdef CONFIG_NAND_FSL_ELBC
+#define CONFIG_SYS_NAND_BASE 0xff800000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+#endif
+
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
+
+/* NAND boot: 4K NAND loader config */
+#define CONFIG_SYS_NAND_SPL_SIZE 0x1000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) + CONFIG_SYS_NAND_SPL_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_START 0x11000000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (0)
+#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
+
+#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS)) \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \
+ | OR_FCM_CSCT \
+ | OR_FCM_CST \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_1 \
+ | OR_FCM_TRLX \
+ | OR_FCM_EHTR)
+#endif /* CONFIG_NAND_FSL_ELBC */
+
+#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
+
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
+/* The assembler doesn't like typecast */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
+ ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
+#else
+/* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
+#endif
+/* Size of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
+
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */
+
+#define CONFIG_SYS_CPLD_BASE 0xffa00000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull
+#else
+#define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
+#endif
+/* CPLD config size: 1Mb */
+#define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
+ BR_PS_8 | BR_V)
+#define CONFIG_CPLD_OR_PRELIM (0xfff009f7)
+
+#define CONFIG_SYS_PMC_BASE 0xff980000
+#define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE
+#define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
+ BR_PS_8 | BR_V)
+#define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
+ OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
+ OR_GPCM_EAD)
+
+#ifdef CONFIG_NAND_U_BOOT
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
+#define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
+#define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
+#else
+#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
+#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
+#ifdef CONFIG_NAND_FSL_ELBC
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
+#endif
+#endif
+#define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */
+#define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */
+
+
+/* Vsc7385 switch */
+#ifdef CONFIG_VSC7385_ENET
+#define CONFIG_SYS_VSC7385_BASE 0xffb00000
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull
+#else
+#define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE
+#endif
+
+#define CONFIG_SYS_VSC7385_BR_PRELIM \
+ (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \
+ OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \
+ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM
+#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM
+
+/* The size of the VSC7385 firmware image */
+#define CONFIG_VSC7385_IMAGE_SIZE 8192
+#endif
+
+/* Serial Port - controlled on board with jumper J8
+ * open - index 2
+ * shorted - index 1
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#endif
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+#define CONFIG_SYS_64BIT_STRTOUL
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+
+/* I2C */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C spd and slave address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} /* Don't probe this addr */
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_SYS_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */
+
+/*
+ * I2C2 EEPROM
+ */
+#undef CONFIG_ID_EEPROM
+
+#define CONFIG_RTC_PT7C4338
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_I2C_PCA9557_ADDR 0x18
+
+/* enable read and write access to EEPROM */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+/*
+ * eSPI - Enhanced SPI
+ */
+#define CONFIG_HARD_SPI
+#define CONFIG_FSL_ESPI
+
+#if defined(CONFIG_SPI_FLASH)
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED 10000000
+#define CONFIG_SF_DEFAULT_MODE 0
+#endif
+
+#if defined(CONFIG_PCI)
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 2, direct to uli, tgtid 2, Base address 9000 */
+#define CONFIG_SYS_PCIE2_NAME "PCIe SLOT"
+#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
+#else
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
+#endif
+#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
+#else
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
+#endif
+#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
+
+/* controller 1, Slot 2, tgtid 1, Base address a000 */
+#define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT"
+#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
+#else
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
+#endif
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
+#else
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
+#endif
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
+
+
+/*PCIE video card used*/
+#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE2_IO_VIRT
+
+/* video */
+#define CONFIG_VIDEO
+#ifdef CONFIG_VIDEO
+#define CONFIG_BIOSEMU
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_ATI_RADEON_FB
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
+#endif
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI
+#endif
+
+#define CONFIG_MII /* MII PHY management */
+#define CONFIG_TSEC1
+#define CONFIG_TSEC1_NAME "eTSEC1"
+#define CONFIG_TSEC2
+#define CONFIG_TSEC2_NAME "eTSEC2"
+#define CONFIG_TSEC3
+#define CONFIG_TSEC3_NAME "eTSEC3"
+
+#define TSEC1_PHY_ADDR 2
+#define TSEC2_PHY_ADDR 0
+#define TSEC3_PHY_ADDR 1
+
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC3_PHYIDX 0
+
+#define CONFIG_ETHPRIME "eTSEC1"
+
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#endif /* CONFIG_TSEC_ENET */
+
+#ifdef CONFIG_QE
+/* QE microcode/firmware address */
+#define CONFIG_SYS_QE_FW_ADDR 0xefec0000
+#define CONFIG_SYS_QE_FW_LENGTH 0x10000
+#endif /* CONFIG_QE */
+
+#ifdef CONFIG_P1025RDB
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120)
+
+#undef CONFIG_UEC_ETH
+#define CONFIG_PHY_MODE_NEED_CHANGE
+
+#define CONFIG_UEC_ETH1 /* ETH1 */
+#define CONFIG_HAS_ETH0
+
+#ifdef CONFIG_UEC_ETH1
+#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
+#define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */
+#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */
+#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
+#endif /* CONFIG_UEC_ETH1 */
+
+#define CONFIG_UEC_ETH5 /* ETH5 */
+#define CONFIG_HAS_ETH1
+
+#ifdef CONFIG_UEC_ETH5
+#define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */
+#define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE
+#define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */
+#define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH
+#define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */
+#define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SYS_UEC5_INTERFACE_SPEED 100
+#endif /* CONFIG_UEC_ETH5 */
+#endif /* CONFIG_P1025RDB */
+
+/*
+ * Environment
+ */
+#ifdef CONFIG_SYS_RAMBOOT
+#ifdef CONFIG_RAMBOOT_SPIFLASH
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 10000000
+#define CONFIG_ENV_SPI_MODE 0
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#elif defined(CONFIG_RAMBOOT_SDCARD)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#elif defined(CONFIG_NAND_U_BOOT)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
+#else
+#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_SIZE 0x2000
+#endif
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR 0xfff80000
+#else
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#endif
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+#endif
+
+#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
+
+/*
+ * USB
+ */
+#define CONFIG_HAS_FSL_DR_USB
+
+#if defined(CONFIG_HAS_FSL_DR_USB)
+#define CONFIG_USB_EHCI
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_USB_STORAGE
+#endif
+#endif
+
+#define CONFIG_MMC
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
+ || defined(CONFIG_FSL_SATA)
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+ /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_HOSTNAME unknown
+#define CONFIG_ROOTPATH /opt/nfsroot
+#define CONFIG_BOOTFILE uImage
+#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 1000000
+
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#define CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE 115200
+
+#ifdef __SW_BOOT_NOR
+#define __NOR_RST_CMD \
+norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
+i2c mw 18 3 __SW_BOOT_MASK 1; reset
+#endif
+#ifdef __SW_BOOT_SPI
+#define __SPI_RST_CMD \
+spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
+i2c mw 18 3 __SW_BOOT_MASK 1; reset
+#endif
+#ifdef __SW_BOOT_SD
+#define __SD_RST_CMD \
+sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
+i2c mw 18 3 __SW_BOOT_MASK 1; reset
+#endif
+#ifdef __SW_BOOT_NAND
+#define __NAND_RST_CMD \
+nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
+i2c mw 18 3 __SW_BOOT_MASK 1; reset
+#endif
+#ifdef __SW_BOOT_PCIE
+#define __PCIE_RST_CMD \
+pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
+i2c mw 18 3 __SW_BOOT_MASK 1; reset
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+"netdev=eth0\0" \
+"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+"loadaddr=1000000\0" \
+"bootfile=uImage\0" \
+"tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
+"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \
+"consoledev=ttyS0\0" \
+"ramdiskaddr=2000000\0" \
+"ramdiskfile=rootfs.ext2.gz.uboot\0" \
+"fdtaddr=c00000\0" \
+"bdev=sda1\0" \
+"jffs2nor=mtdblock3\0" \
+"norbootaddr=ef080000\0" \
+"norfdtaddr=ef040000\0" \
+"jffs2nand=mtdblock9\0" \
+"nandbootaddr=100000\0" \
+"nandfdtaddr=80000\0" \
+"ramdisk_size=120000\0" \
+"map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
+"map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
+MK_STR(__NOR_RST_CMD)"\0" \
+MK_STR(__SPI_RST_CMD)"\0" \
+MK_STR(__SD_RST_CMD)"\0" \
+MK_STR(__NAND_RST_CMD)"\0" \
+MK_STR(__PCIE_RST_CMD)"\0"
+
+#define CONFIG_NFSBOOTCOMMAND \
+"setenv bootargs root=/dev/nfs rw " \
+"nfsroot=$serverip:$rootpath " \
+"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+"console=$consoledev,$baudrate $othbootargs;" \
+"tftp $loadaddr $bootfile;" \
+"tftp $fdtaddr $fdtfile;" \
+"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_HDBOOT \
+"setenv bootargs root=/dev/$bdev rw rootdelay=30 " \
+"console=$consoledev,$baudrate $othbootargs;" \
+"usb start;" \
+"ext2load usb 0:1 $loadaddr /boot/$bootfile;" \
+"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \
+"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_USB_FAT_BOOT \
+"setenv bootargs root=/dev/ram rw " \
+"console=$consoledev,$baudrate $othbootargs " \
+"ramdisk_size=$ramdisk_size;" \
+"usb start;" \
+"fatload usb 0:2 $loadaddr $bootfile;" \
+"fatload usb 0:2 $fdtaddr $fdtfile;" \
+"fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
+"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_USB_EXT2_BOOT \
+"setenv bootargs root=/dev/ram rw " \
+"console=$consoledev,$baudrate $othbootargs " \
+"ramdisk_size=$ramdisk_size;" \
+"usb start;" \
+"ext2load usb 0:4 $loadaddr $bootfile;" \
+"ext2load usb 0:4 $fdtaddr $fdtfile;" \
+"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
+"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_NORBOOT \
+"setenv bootargs root=/dev/$jffs2nor rw " \
+"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \
+"bootm $norbootaddr - $norfdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+"setenv bootargs root=/dev/ram rw " \
+"console=$consoledev,$baudrate $othbootargs " \
+"ramdisk_size=$ramdisk_size;" \
+"tftp $ramdiskaddr $ramdiskfile;" \
+"tftp $loadaddr $bootfile;" \
+"tftp $fdtaddr $fdtfile;" \
+"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 7bf9fc76c..4ec323ece 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -103,14 +103,8 @@
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR2
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 435b148f3..e0af0d26a 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -92,20 +92,6 @@
#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
#endif
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-
-#if XXX
- #define CONFIG_SYS_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */
-#else
- #define CONFIG_SYS_CCSRBAR 0xff700000 /* default CCSRBAR */
-#endif
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-
#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */
/* DDR Setup */
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 5f2fb1e92..af62aea7a 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -91,14 +91,8 @@
#define CONFIG_SYS_MEMTEST_START 0x00400000
#define CONFIG_SYS_MEMTEST_END 0x00C00000
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xFF700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xE0000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xE0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR2
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index fc3881d22..66738d595 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -109,12 +109,9 @@
#ifdef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#endif
-#define CONFIG_SYS_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xfdf00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR1
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 141da2647..a421ba43b 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -121,12 +121,10 @@
#ifdef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#endif
-#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* DDR Setup */
#define CONFIG_FSL_DDR1
diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index b6b391f89..42517c9da 100644
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -78,14 +78,8 @@
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ENABLE_36BIT_PHYS 1
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xef000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/*
* Diagnostics
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index a74766dce..202f209a7 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -96,14 +96,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ENABLE_36BIT_PHYS 1
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xef000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/*
* Diagnostics
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 6588867b8..0c2e7edb2 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -93,14 +93,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ENABLE_36BIT_PHYS 1
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR 0xef000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/*
* Diagnostics
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 863024ff7..8f06aacf7 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -89,7 +89,8 @@ u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr);
int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
phys_addr_t compat_off);
int fdt_alloc_phandle(void *blob);
-int fdt_create_phandle(void *fdt, int nodeoffset, uint32_t phandle);
+int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle);
+int fdt_create_phandle(void *fdt, int nodeoffset);
int fdt_add_edid(void *blob, const char *compat, unsigned char *buf);
int fdt_verify_alias_address(void *fdt, int anode, const char *alias,
diff --git a/include/fm_eth.h b/include/fm_eth.h
new file mode 100644
index 000000000..c7c68820d
--- /dev/null
+++ b/include/fm_eth.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FM_ETH_H__
+#define __FM_ETH_H__
+
+#include <common.h>
+#include <asm/types.h>
+#include <asm/fsl_enet.h>
+
+enum fm_port {
+ FM1_DTSEC1,
+ FM1_DTSEC2,
+ FM1_DTSEC3,
+ FM1_DTSEC4,
+ FM1_DTSEC5,
+ FM1_10GEC1,
+ FM2_DTSEC1,
+ FM2_DTSEC2,
+ FM2_DTSEC3,
+ FM2_DTSEC4,
+ FM2_10GEC1,
+ NUM_FM_PORTS,
+};
+
+enum fm_eth_type {
+ FM_ETH_1G_E,
+ FM_ETH_10G_E,
+};
+
+#define CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xe1120)
+#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xf1000)
+
+#define DEFAULT_FM_MDIO_NAME "FSL_MDIO0"
+#define DEFAULT_FM_TGEC_MDIO_NAME "FM_TGEC_MDIO"
+
+/* Fman ethernet info struct */
+#define FM_ETH_INFO_INITIALIZER(idx, pregs) \
+ .fm = idx, \
+ .phy_regs = (void *)pregs, \
+ .enet_if = PHY_INTERFACE_MODE_NONE, \
+
+#define FM_DTSEC_INFO_INITIALIZER(idx, n) \
+{ \
+ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR) \
+ .index = idx, \
+ .num = n - 1, \
+ .type = FM_ETH_1G_E, \
+ .port = FM##idx##_DTSEC##n, \
+ .rx_port_id = RX_PORT_1G_BASE + n - 1, \
+ .tx_port_id = TX_PORT_1G_BASE + n - 1, \
+ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
+ offsetof(struct ccsr_fman, mac_1g[n-1]),\
+}
+
+#define FM_TGEC_INFO_INITIALIZER(idx, n) \
+{ \
+ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \
+ .index = idx, \
+ .num = n - 1, \
+ .type = FM_ETH_10G_E, \
+ .port = FM##idx##_10GEC##n, \
+ .rx_port_id = RX_PORT_10G_BASE + n - 1, \
+ .tx_port_id = TX_PORT_10G_BASE + n - 1, \
+ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
+ offsetof(struct ccsr_fman, mac_10g[n-1]),\
+}
+
+struct fm_eth_info {
+ u8 enabled;
+ u8 fm;
+ u8 num;
+ u8 phy_addr;
+ int index;
+ u16 rx_port_id;
+ u16 tx_port_id;
+ enum fm_port port;
+ enum fm_eth_type type;
+ void *phy_regs;
+ phy_interface_t enet_if;
+ u32 compat_offset;
+ struct mii_dev *bus;
+};
+
+struct tgec_mdio_info {
+ struct tgec_mdio_controller *regs;
+ char *name;
+};
+
+int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info);
+int fm_standard_init(bd_t *bis);
+void fman_enet_init(void);
+void fdt_fixup_fman_ethernet(void *fdt);
+phy_interface_t fm_info_get_enet_if(enum fm_port port);
+void fm_info_set_phy_address(enum fm_port port, int address);
+void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus);
+void fm_disable_port(enum fm_port port);
+
+#endif
diff --git a/include/mpc85xx.h b/include/mpc85xx.h
index 2495b99c3..11d898527 100644
--- a/include/mpc85xx.h
+++ b/include/mpc85xx.h
@@ -26,4 +26,46 @@
#define SCCR_DFBRG10 0x00000002 /* BRGCLK division by 64 */
#define SCCR_DFBRG11 0x00000003 /* BRGCLK division by 256 */
+/*
+ * Define default values for some CCSR macros to make header files cleaner*
+ *
+ * To completely disable CCSR relocation in a board header file, define
+ * CONFIG_SYS_CCSR_DO_NOT_RELOCATE. This will force CONFIG_SYS_CCSRBAR_PHYS
+ * to a value that is the same as CONFIG_SYS_CCSRBAR.
+ */
+
+#ifdef CONFIG_SYS_CCSRBAR_PHYS
+#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly. Use \
+CONFIG_SYS_CCSRBAR_PHYS_LOW and/or CONFIG_SYS_CCSRBAR_PHYS_HIGH instead."
+#endif
+
+#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#undef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf
+#else
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0
+#endif
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT
+#endif
+
+#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \
+ CONFIG_SYS_CCSRBAR_PHYS_LOW)
+
+#ifndef CONFIG_SYS_IMMR
+#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
+#endif
+
#endif /* __MPC85xx_H__ */
diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile
new file mode 100644
index 000000000..8d240eadd
--- /dev/null
+++ b/nand_spl/board/freescale/p1010rdb/Makefile
@@ -0,0 +1,141 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# Copyright 2011 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+NAND_SPL := y
+CONFIG_SYS_TEXT_BASE_SPL := 0xff800000
+PAD_TO := 0xff802000
+
+include $(TOPDIR)/config.mk
+
+nandobj := $(OBJTREE)/nand_spl/
+
+LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \
+ $(LDFLAGS_FINAL)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o resetvec.o ticks.o
+COBJS = cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
+ nand_boot.o nand_boot_fsl_ifc.o ns16550.o tlb.o tlb_table.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(nandobj)board/$(BOARDDIR)
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+
+# create symbolic links for common files
+
+$(obj)cache.c:
+ @rm -f $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
+
+$(obj)cpu_init_early.c:
+ @rm -f $(obj)cpu_init_early.c
+ ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $(obj)cpu_init_early.c
+
+$(obj)cpu_init_nand.c:
+ @rm -f $(obj)cpu_init_nand.c
+ ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_nand.c $(obj)cpu_init_nand.c
+
+$(obj)fsl_law.c:
+ @rm -f $(obj)fsl_law.c
+ ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
+
+$(obj)law.c:
+ @rm -f $(obj)law.c
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
+
+$(obj)nand_boot_fsl_ifc.c:
+ @rm -f $(obj)nand_boot_fsl_ifc.c
+ ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_ifc.c \
+ $(obj)nand_boot_fsl_ifc.c
+
+$(obj)ns16550.c:
+ @rm -f $(obj)ns16550.c
+ ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+
+$(obj)resetvec.S:
+ @rm -f $(obj)resetvec.S
+ ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S
+
+$(obj)fixed_ivor.S:
+ @rm -f $(obj)fixed_ivor.S
+ ln -sf $(SRCTREE)/$(CPUDIR)/fixed_ivor.S $(obj)fixed_ivor.S
+
+$(obj)start.S: $(obj)fixed_ivor.S
+ @rm -f $(obj)start.S
+ ln -sf $(SRCTREE)/$(CPUDIR)/start.S $(obj)start.S
+
+$(obj)ticks.S:
+ @rm -f $(obj)ticks.S
+ ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S
+
+$(obj)tlb.c:
+ @rm -f $(obj)tlb.c
+ ln -sf $(SRCTREE)/$(CPUDIR)/tlb.c $(obj)tlb.c
+
+$(obj)tlb_table.c:
+ @rm -f $(obj)tlb_table.c
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
+
+ifneq ($(OBJTREE), $(SRCTREE))
+$(obj)nand_boot.c:
+ @rm -f $(obj)nand_boot.c
+ ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+endif
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/freescale/p1010rdb/nand_boot.c b/nand_spl/board/freescale/p1010rdb/nand_boot.c
new file mode 100644
index 000000000..16eeb61d8
--- /dev/null
+++ b/nand_spl/board/freescale/p1010rdb/nand_boot.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <mpc85xx.h>
+#include <asm/io.h>
+#include <ns16550.h>
+#include <nand.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_law.h>
+
+#define udelay(x) { int j; for (j = 0; j < x * 10000; j++) isync(); }
+
+unsigned long ddr_freq_mhz;
+
+void sdram_init(void)
+{
+ ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+
+ out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL | SDRAM_CFG_32_BE);
+ out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
+ out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
+ out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL_2);
+ out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
+
+ if (ddr_freq_mhz < 700) {
+ out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3_667);
+ out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0_667);
+ out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_667);
+ out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_667);
+ out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_667);
+ out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_667);
+ out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_667);
+ out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL_667);
+ out_be32(&ddr->ddr_wrlvl_cntl,
+ CONFIG_SYS_DDR_WRLVL_CONTROL_667);
+ } else {
+ out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3_800);
+ out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0_800);
+ out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_800);
+ out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_800);
+ out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_800);
+ out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_800);
+ out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_800);
+ out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL_800);
+ out_be32(&ddr->ddr_wrlvl_cntl,
+ CONFIG_SYS_DDR_WRLVL_CONTROL_800);
+ }
+
+ out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
+ out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
+ out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CONTROL);
+
+ /* mimic 500us delay, with busy isync() loop */
+ udelay(100);
+
+ /* Let the controller go */
+ out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
+
+ set_next_law(CONFIG_SYS_NAND_DDR_LAW, LAW_SIZE_1G, LAW_TRGT_IF_DDR_1);
+}
+
+void board_init_f(ulong bootflag)
+{
+ u32 plat_ratio, ddr_ratio;
+ unsigned long bus_clk;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+ /* initialize selected port with appropriate baud rate */
+ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ plat_ratio >>= 1;
+ bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+
+ ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
+ ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+ ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000;
+
+ NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+ bus_clk / 16 / CONFIG_BAUDRATE);
+
+ puts("\nNAND boot... ");
+
+ /* Initialize the DDR3 */
+ sdram_init();
+
+ /* copy code to RAM and jump to it - this should not return */
+ /* NOTE - code has to be copied out of NAND buffer before
+ * other blocks can be read.
+ */
+ relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0,
+ CONFIG_SYS_NAND_U_BOOT_RELOC);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (c == '\n')
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+ while (*str)
+ putc(*str++);
+}
diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
new file mode 100644
index 000000000..475cc496b
--- /dev/null
+++ b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
@@ -0,0 +1,137 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# Copyright 2011 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+NAND_SPL := y
+CONFIG_SYS_TEXT_BASE_SPL := 0xfff00000
+PAD_TO := 0xff801000
+
+include $(TOPDIR)/config.mk
+
+nandobj := $(OBJTREE)/nand_spl/
+
+LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
+ $(LDFLAGS) $(LDFLAGS_FINAL)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o resetvec.o
+COBJS = cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
+ nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(nandobj)board/$(BOARDDIR)
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+
+# create symbolic links for common files
+
+$(obj)cache.c:
+ @rm -f $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
+
+$(obj)cpu_init_early.c:
+ @rm -f $(obj)cpu_init_early.c
+ ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $(obj)cpu_init_early.c
+
+$(obj)cpu_init_nand.c:
+ @rm -f $(obj)cpu_init_nand.c
+ ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_nand.c $(obj)cpu_init_nand.c
+
+$(obj)fsl_law.c:
+ @rm -f $(obj)fsl_law.c
+ ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
+
+$(obj)law.c:
+ @rm -f $(obj)law.c
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
+
+$(obj)nand_boot_fsl_elbc.c:
+ @rm -f $(obj)nand_boot_fsl_elbc.c
+ ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
+ $(obj)nand_boot_fsl_elbc.c
+
+$(obj)ns16550.c:
+ @rm -f $(obj)ns16550.c
+ ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+
+$(obj)resetvec.S:
+ @rm -f $(obj)resetvec.S
+ ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S
+
+$(obj)fixed_ivor.S:
+ @rm -f $(obj)fixed_ivor.S
+ ln -sf $(SRCTREE)/$(CPUDIR)/fixed_ivor.S $(obj)fixed_ivor.S
+
+$(obj)start.S: $(obj)fixed_ivor.S
+ @rm -f $(obj)start.S
+ ln -sf $(SRCTREE)/$(CPUDIR)/start.S $(obj)start.S
+
+$(obj)tlb.c:
+ @rm -f $(obj)tlb.c
+ ln -sf $(SRCTREE)/$(CPUDIR)/tlb.c $(obj)tlb.c
+
+$(obj)tlb_table.c:
+ @rm -f $(obj)tlb_table.c
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
+
+ifneq ($(OBJTREE), $(SRCTREE))
+$(obj)nand_boot.c:
+ @rm -f $(obj)nand_boot.c
+ ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+endif
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c b/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
new file mode 100644
index 000000000..b9796ea6c
--- /dev/null
+++ b/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <asm/io.h>
+#include <nand.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#define udelay(x) {int i, j; \
+ for (i = 0; i < x; i++) \
+ for (j = 0; j < 10000; j++) \
+ ; }
+
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+void sdram_init(void)
+{
+ ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+
+ out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
+ out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
+#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
+ out_be32(&ddr->cs1_bnds, CONFIG_SYS_DDR_CS1_BNDS);
+ out_be32(&ddr->cs1_config, CONFIG_SYS_DDR_CS1_CONFIG);
+#endif
+ out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
+ out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
+ out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
+ out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
+
+ out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL_2);
+ out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1);
+ out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2);
+
+ out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL);
+ out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
+ out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL);
+
+ out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
+ out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
+ out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CONTROL);
+ out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CONTROL);
+
+ /* Set, but do not enable the memory */
+ out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN);
+
+ asm volatile("sync;isync");
+ udelay(500);
+
+ /* Let the controller go */
+ out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
+
+ set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1);
+}
+
+void board_init_f(ulong bootflag)
+{
+ u32 plat_ratio, bus_clk;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+#ifndef CONFIG_QE
+ ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+#endif
+
+ /* initialize selected port with appropriate baud rate */
+ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ plat_ratio >>= 1;
+ bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+
+ NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+ bus_clk / 16 / CONFIG_BAUDRATE);
+
+ puts("\nNAND boot... ");
+
+#ifndef CONFIG_QE
+ /* init DDR3 reset signal */
+ out_be32(&pgpio->gpdir, 0x02000000);
+ out_be32(&pgpio->gpodr, 0x00200000);
+ out_be32(&pgpio->gpdat, 0x00000000);
+ udelay(1000);
+ out_be32(&pgpio->gpdat, 0x00200000);
+ udelay(1000);
+ out_be32(&pgpio->gpdir, 0x00000000);
+#endif
+
+ /* Initialize the DDR3 */
+ sdram_init();
+
+ /* copy code to RAM and jump to it - this should not return */
+ /* NOTE - code has to be copied out of NAND buffer before
+ * other blocks can be read.
+ */
+ relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0,
+ CONFIG_SYS_NAND_U_BOOT_RELOC);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (c == '\n')
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+ while (*str)
+ putc(*str++);
+}
diff --git a/nand_spl/nand_boot_fsl_ifc.c b/nand_spl/nand_boot_fsl_ifc.c
new file mode 100644
index 000000000..44972c5c0
--- /dev/null
+++ b/nand_spl/nand_boot_fsl_ifc.c
@@ -0,0 +1,271 @@
+/*
+ * NAND boot for FSL Integrated Flash Controller, NAND Flash Control Machine
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fsl_ifc.h>
+#include <linux/mtd/nand.h>
+
+static inline int is_blank(uchar *addr, int page_size)
+{
+ int i;
+
+ for (i = 0; i < page_size; i++) {
+ if (__raw_readb(&addr[i]) != 0xff)
+ return 0;
+ }
+
+ /*
+ * For the SPL, don't worry about uncorrectable errors
+ * where the main area is all FFs but shouldn't be.
+ */
+ return 1;
+}
+
+/* returns nonzero if entire page is blank */
+static inline int check_read_ecc(uchar *buf, u32 *eccstat,
+ unsigned int bufnum, int page_size)
+{
+ u32 reg = eccstat[bufnum / 4];
+ int errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
+
+ if (errors == 15) { /* uncorrectable */
+ /* Blank pages fail hw ECC checks */
+ if (is_blank(buf, page_size))
+ return 1;
+
+ puts("ecc error\n");
+ for (;;)
+ ;
+ }
+
+ return 0;
+}
+
+static inline void nand_wait(uchar *buf, int bufnum, int page_size)
+{
+ struct fsl_ifc *ifc = IFC_BASE_ADDR;
+ u32 status;
+ u32 eccstat[4];
+ int bufperpage = page_size / 512;
+ int bufnum_end, i;
+
+ bufnum *= bufperpage;
+ bufnum_end = bufnum + bufperpage - 1;
+
+ do {
+ status = in_be32(&ifc->ifc_nand.nand_evter_stat);
+ } while (!(status & IFC_NAND_EVTER_STAT_OPC));
+
+ if (status & IFC_NAND_EVTER_STAT_FTOER) {
+ puts("flash time out error\n");
+ for (;;)
+ ;
+ }
+
+ for (i = bufnum / 4; i <= bufnum_end / 4; i++)
+ eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
+
+ for (i = bufnum; i <= bufnum_end; i++) {
+ if (check_read_ecc(buf, eccstat, i, page_size))
+ break;
+ }
+
+ out_be32(&ifc->ifc_nand.nand_evter_stat, status);
+}
+
+static inline int bad_block(uchar *marker, int port_size)
+{
+ if (port_size == 8)
+ return __raw_readb(marker) != 0xff;
+ else
+ return __raw_readw((u16 *)marker) != 0xffff;
+}
+
+static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
+{
+ struct fsl_ifc *ifc = IFC_BASE_ADDR;
+ uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
+ int page_size;
+ int port_size;
+ int pages_per_blk;
+ int blk_size;
+ int bad_marker = 0;
+ int bufnum_mask, bufnum;
+
+ int csor, cspr;
+ int pos = 0;
+ int j = 0;
+
+ int sram_addr;
+ int pg_no;
+
+ /* Get NAND Flash configuration */
+ csor = CONFIG_SYS_NAND_CSOR;
+ cspr = CONFIG_SYS_NAND_CSPR;
+
+ if (!(csor & CSOR_NAND_ECC_DEC_EN)) {
+ /* soft ECC in SPL is unimplemented */
+ puts("WARNING: soft ECC not checked in SPL\n");
+ } else {
+ u32 hwcsor;
+
+ /* make sure board is configured with ECC on boot */
+ hwcsor = in_be32(&ifc->csor_cs[0].csor);
+ if (!(hwcsor & CSOR_NAND_ECC_DEC_EN))
+ puts("WARNING: ECC not checked in SPL, "
+ "check board cfg\n");
+ }
+
+ port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;
+
+ if (csor & CSOR_NAND_PGS_4K) {
+ page_size = 4096;
+ bufnum_mask = 1;
+ } else if (csor & CSOR_NAND_PGS_2K) {
+ page_size = 2048;
+ bufnum_mask = 3;
+ } else {
+ page_size = 512;
+ bufnum_mask = 15;
+
+ if (port_size == 8)
+ bad_marker = 5;
+ }
+
+ pages_per_blk =
+ 32 << ((csor & CSOR_NAND_PB_MASK) >> CSOR_NAND_PB_SHIFT);
+
+ blk_size = pages_per_blk * page_size;
+
+ /* Open Full SRAM mapping for spare are access */
+ out_be32(&ifc->ifc_nand.ncfgr, 0x0);
+
+ /* Clear Boot events */
+ out_be32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff);
+
+ /* Program FIR/FCR for Large/Small page */
+ if (page_size > 512) {
+ out_be32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT));
+ out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
+
+ out_be32(&ifc->ifc_nand.nand_fcr0,
+ (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
+ } else {
+ out_be32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT));
+ out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
+
+ out_be32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
+ }
+
+ /* Program FBCR = 0 for full page read */
+ out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+
+ /* Read and copy u-boot on SDRAM from NAND device, In parallel
+ * check for Bad block if found skip it and read continue to
+ * next Block
+ */
+ while (pos < uboot_size) {
+ int i = 0;
+ do {
+ pg_no = offs / page_size;
+ bufnum = pg_no & bufnum_mask;
+ sram_addr = bufnum * page_size * 2;
+
+ out_be32(&ifc->ifc_nand.row0, pg_no);
+ out_be32(&ifc->ifc_nand.col0, 0);
+ /* start read */
+ out_be32(&ifc->ifc_nand.nandseq_strt,
+ IFC_NAND_SEQ_STRT_FIR_STRT);
+
+ /* wait for read to complete */
+ nand_wait(&buf[sram_addr], bufnum, page_size);
+
+ /*
+ * If either of the first two pages are marked bad,
+ * continue to the next block.
+ */
+ if (i++ < 2 &&
+ bad_block(&buf[sram_addr + page_size + bad_marker],
+ port_size)) {
+ puts("skipping\n");
+ offs = (offs + blk_size) & ~(blk_size - 1);
+ pos &= ~(blk_size - 1);
+ break;
+ }
+
+ for (j = 0; j < page_size; j++)
+ dst[pos + j] = __raw_readb(&buf[sram_addr + j]);
+
+ pos += page_size;
+ offs += page_size;
+ } while ((offs & (blk_size - 1)) && (pos < uboot_size));
+ }
+}
+
+/*
+ * Main entrypoint for NAND Boot. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-boot image
+ * from NAND into SDRAM and starts from there.
+ */
+void nand_boot(void)
+{
+ __attribute__((noreturn)) void (*uboot)(void);
+
+ /*
+ * Load U-Boot image from NAND into RAM
+ */
+ nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
+ (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
+
+#ifdef CONFIG_NAND_ENV_DST
+ nand_load(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+ (uchar *)CONFIG_NAND_ENV_DST);
+
+#ifdef CONFIG_ENV_OFFSET_REDUND
+ nand_load(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
+ (uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
+#endif
+#endif
+
+ /*
+ * Jump to U-Boot image
+ */
+ /*
+ * Clean d-cache and invalidate i-cache, to
+ * make sure that no stale data is executed.
+ */
+ flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
+ uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
+ uboot();
+}