at91: move dataflash spi driver to drivers/spi

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

2 files changed, 0 insertions, 158 deletions

diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile
index d0d47e674..34e746182 100644
--- a/cpu/arm926ejs/at91/Makefile
+++ b/cpu/arm926ejs/at91/Makefile
@@ -55,7 +55,6 @@ COBJS-y				+= at91sam9rl_serial.o
 COBJS-$(CONFIG_HAS_DATAFLASH)	+= at91sam9rl_spi.o
 endif
 COBJS-$(CONFIG_AT91_LED)	+= led.o
-COBJS-$(CONFIG_HAS_DATAFLASH)	+= spi.o
 COBJS-y	+= timer.o
 SOBJS	= lowlevel_init.o
 
diff --git a/cpu/arm926ejs/at91/spi.c b/cpu/arm926ejs/at91/spi.c
deleted file mode 100644
index 3eb252c5b..000000000
--- a/cpu/arm926ejs/at91/spi.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Driver for ATMEL DataFlash support
- * Author : Hamid Ikdoumi (Atmel)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_spi.h>
-
-#include <dataflash.h>
-
-#define AT91_SPI_PCS0_DATAFLASH_CARD	0xE	/* Chip Select 0: NPCS0%1110 */
-#define AT91_SPI_PCS1_DATAFLASH_CARD	0xD	/* Chip Select 0: NPCS0%1101 */
-#define AT91_SPI_PCS3_DATAFLASH_CARD	0x7	/* Chip Select 3: NPCS3%0111 */
-
-void AT91F_SpiInit(void)
-{
-	/* Reset the SPI */
-	writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR);
-
-	/* Configure SPI in Master Mode with No CS selected !!! */
-	writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS,
-	       AT91_BASE_SPI + AT91_SPI_MR);
-
-	/* Configure CS0 */
-	writel(AT91_SPI_NCPHA |
-	       (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
-	       (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
-	       ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8),
-	       AT91_BASE_SPI + AT91_SPI_CSR(0));
-
-#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1
-	/* Configure CS1 */
-	writel(AT91_SPI_NCPHA |
-	       (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
-	       (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
-	       ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8),
-	       AT91_BASE_SPI + AT91_SPI_CSR(1));
-#endif
-
-#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3
-	/* Configure CS3 */
-	writel(AT91_SPI_NCPHA |
-	       (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
-	       (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
-	       ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8),
-	       AT91_BASE_SPI + AT91_SPI_CSR(3));
-#endif
-
-	/* SPI_Enable */
-	writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR);
-
-	while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS));
-
-	/*
-	 * Add tempo to get SPI in a safe state.
-	 * Should not be needed for new silicon (Rev B)
-	 */
-	udelay(500000);
-	readl(AT91_BASE_SPI + AT91_SPI_SR);
-	readl(AT91_BASE_SPI + AT91_SPI_RDR);
-
-}
-
-void AT91F_SpiEnable(int cs)
-{
-	unsigned long mode;
-
-	switch (cs) {
-	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
-		mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
-		mode &= 0xFFF0FFFF;
-		writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
-		       AT91_BASE_SPI + AT91_SPI_MR);
-		break;
-	case 1:	/* Configure SPI CS1 for Serial DataFlash AT45DBxx */
-		mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
-		mode &= 0xFFF0FFFF;
-		writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
-		       AT91_BASE_SPI + AT91_SPI_MR);
-		break;
-	case 3:
-		mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
-		mode &= 0xFFF0FFFF;
-		writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
-		       AT91_BASE_SPI + AT91_SPI_MR);
-		break;
-	}
-
-	/* SPI_Enable */
-	writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR);
-}
-
-unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc);
-
-unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
-{
-	unsigned int timeout;
-
-	pDesc->state = BUSY;
-
-	writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
-
-	/* Initialize the Transmit and Receive Pointer */
-	writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR);
-	writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR);
-
-	/* Intialize the Transmit and Receive Counters */
-	writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR);
-	writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR);
-
-	if (pDesc->tx_data_size != 0) {
-		/* Initialize the Next Transmit and Next Receive Pointer */
-		writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR);
-		writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR);
-
-		/* Intialize the Next Transmit and Next Receive Counters */
-		writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR);
-		writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR);
-	}
-
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked();
-	timeout = 0;
-
-	writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR);
-	while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) &&
-		((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT));
-	writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
-	pDesc->state = IDLE;
-
-	if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT) {
-		printf("Error Timeout\n\r");
-		return DATAFLASH_ERROR;
-	}
-
-	return DATAFLASH_OK;
-}