aboutsummaryrefslogtreecommitdiff
path: root/arch/i386
diff options
context:
space:
mode:
authorGraeme Russ <graeme.russ@gmail.com>2010-04-24 00:05:41 +1000
committerWolfgang Denk <wd@denx.de>2010-05-06 00:14:44 +0200
commit759598f82f02cc84614450807cb5de43ca18a339 (patch)
treeb3ce9e346595ea56be31107aba0848238f31a00e /arch/i386
parent4dba333b3c7b34073b0439cc942877f98403632c (diff)
downloadu-boot-linaro-stable-759598f82f02cc84614450807cb5de43ca18a339.tar.gz
x86: Split sc520 memory sizing versus reporting
This patch allows the low-level assembler boot-strap to obtain the RAM size without calling the destructive 'sizer' routine. This allows boot-strapping from a U-Boot image loaded in RAM Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Diffstat (limited to 'arch/i386')
-rw-r--r--arch/i386/cpu/sc520/sc520_asm.S94
-rw-r--r--arch/i386/cpu/start.S5
2 files changed, 61 insertions, 38 deletions
diff --git a/arch/i386/cpu/sc520/sc520_asm.S b/arch/i386/cpu/sc520/sc520_asm.S
index 135f7b4f3..947e12bbb 100644
--- a/arch/i386/cpu/sc520/sc520_asm.S
+++ b/arch/i386/cpu/sc520/sc520_asm.S
@@ -498,47 +498,21 @@ bad_ram:
dram_done:
- /* readback DRCBENDADR and return the number
- * of available ram bytes in %eax */
-
- movl $DRCBENDADR, %edi /* DRAM ending address register */
-
-bank0: movl (%edi), %eax
- movl %eax, %ecx
- andl $0x00000080, %ecx
- jz bank1
- andl $0x0000007f, %eax
- shll $22, %eax
- movl %eax, %ebx
-
-bank1: movl (%edi), %eax
- movl %eax, %ecx
- andl $0x00008000, %ecx
- jz bank2
- andl $0x00007f00, %eax
- shll $14, %eax
- movl %eax, %ebx
-
-bank2: movl (%edi), %eax
- movl %eax, %ecx
- andl $0x00800000, %ecx
- jz bank3
- andl $0x007f0000, %eax
- shll $6, %eax
- movl %eax, %ebx
+#if CONFIG_SYS_SDRAM_ECC_ENABLE
+ /*
+ * We are in the middle of an existing 'call' - Need to store the
+ * existing return address before making another 'call'
+ */
+ movl %ebp, %ebx
-bank3: movl (%edi), %eax
- movl %eax, %ecx
- andl $0x80000000, %ecx
- jz done
- andl $0x7f000000, %eax
- shrl $2, %eax
- movl %eax, %ebx
+ /* Get the memory size */
+ movl $init_ecc, %ebp
+ jmpl get_mem_size
-done:
- movl %ebx, %eax
+init_ecc:
+ /* Restore the orignal return address */
+ movl %ebx, %ebp
-#if CONFIG_SYS_SDRAM_ECC_ENABLE
/* A nominal memory test: just a byte at each address line */
movl %eax, %ecx
shrl $0x1, %ecx
@@ -575,6 +549,50 @@ set_ecc:
mov $0x05, %al
movb %al, (%edi)
#endif
+
out:
+ jmp *%ebp
+
+/*
+ * Read and decode the sc520 DRCBENDADR MMCR and return the number of
+ * available ram bytes in %eax
+ */
+.globl get_mem_size
+get_mem_size:
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
+
+bank0: movl (%edi), %eax
+ movl %eax, %ecx
+ andl $0x00000080, %ecx
+ jz bank1
+ andl $0x0000007f, %eax
+ shll $22, %eax
+ movl %eax, %ebx
+
+bank1: movl (%edi), %eax
+ movl %eax, %ecx
+ andl $0x00008000, %ecx
+ jz bank2
+ andl $0x00007f00, %eax
+ shll $14, %eax
+ movl %eax, %ebx
+
+bank2: movl (%edi), %eax
+ movl %eax, %ecx
+ andl $0x00800000, %ecx
+ jz bank3
+ andl $0x007f0000, %eax
+ shll $6, %eax
+ movl %eax, %ebx
+
+bank3: movl (%edi), %eax
+ movl %eax, %ecx
+ andl $0x80000000, %ecx
+ jz done
+ andl $0x7f000000, %eax
+ shrl $2, %eax
+ movl %eax, %ebx
+
+done:
movl %ebx, %eax
jmp *%ebp
diff --git a/arch/i386/cpu/start.S b/arch/i386/cpu/start.S
index 25d32e658..1980f1a7b 100644
--- a/arch/i386/cpu/start.S
+++ b/arch/i386/cpu/start.S
@@ -63,6 +63,11 @@ early_board_init_ret:
jmp mem_init
mem_init_ret:
+ /* fetch memory size (into %eax) */
+ mov $get_mem_size_ret, %ebp
+ jmp get_mem_size
+get_mem_size_ret:
+
/* Check we have enough memory for stack */
movl $CONFIG_SYS_STACK_SIZE, %ecx
cmpl %ecx, %eax