x86: Rename i386 to x86

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

1 files changed, 0 insertions, 132 deletions

diff --git a/arch/i386/cpu/start.S b/arch/i386/cpu/start.S
deleted file mode 100644
index 2124a42c9..000000000
--- a/arch/i386/cpu/start.S
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *  U-boot - i386 Startup Code
- *
- * (C) Copyright 2008-2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/global_data.h>
-#include <asm/processor-flags.h>
-
-.section .text
-.code32
-.globl _start
-.type _start, @function
-.globl _i386boot_start
-_i386boot_start:
-	/*
-	 * This is the fail safe 32-bit bootstrap entry point. The
-	 * following code is not executed from a cold-reset (actually, a
-	 * lot of it is, but from real-mode after cold reset. It is
-	 * repeated here to put the board into a state as close to cold
-	 * reset as necessary)
-	 */
-	cli
-	cld
-
-	/* Turn of cache (this might require a 486-class CPU) */
-	movl	%cr0, %eax
-	orl	$(X86_CR0_NW | X86_CR0_CD), %eax
-	movl	%eax, %cr0
-	wbinvd
-
-	/* Tell 32-bit code it is being entered from an in-RAM copy */
-	movw	$GD_FLG_WARM_BOOT, %bx
-_start:
-	/* This is the 32-bit cold-reset entry point */
-
-	/* Load the segement registes to match the gdt loaded in start16.S */
-	movl	$0x18, %eax
-	movw	%ax, %fs
-	movw	%ax, %ds
-	movw	%ax, %gs
-	movw	%ax, %es
-	movw	%ax, %ss
-
-	/* Clear the interupt vectors */
-	lidt	blank_idt_ptr
-
-	/* Early platform init (setup gpio, etc ) */
-	jmp	early_board_init
-.globl early_board_init_ret
-early_board_init_ret:
-
-	/* Initialise Cache-As-RAM */
-	jmp	car_init
-.globl car_init_ret
-car_init_ret:
-	/*
-	 * We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
-	 * or fully initialised SDRAM - we really don't care which)
-	 * starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
-	 */
-	movl	$CONFIG_SYS_INIT_SP_ADDR, %esp
-
-	/* Set parameter to board_init_f() to boot flags */
-	xorl	%eax, %eax
-	movw	%bx, %ax
-
-	/* Enter, U-boot! */
-	call	board_init_f
-
-	/* indicate (lack of) progress */
-	movw	$0x85, %ax
-	jmp	die
-
-.globl relocate_code
-.type relocate_code, @function
-relocate_code:
-	/*
-	 * SDRAM has been initialised, U-Boot code has been copied into
-	 * RAM, BSS has been cleared and relocation adjustments have been
-	 * made. It is now time to jump into the in-RAM copy of U-Boot
-	 *
-	 * %eax = Address of top of stack
-	 * %edx = Address of Global Data
-	 * %ecx = Base address of in-RAM copy of U-Boot
-	 */
-
-	/* Setup stack in RAM */
-	movl	%eax, %esp
-
-	/* Setup call address of in-RAM copy of board_init_r() */
-	movl	$board_init_r, %ebp
-	addl	(GD_RELOC_OFF * 4)(%edx), %ebp
-
-	/* Setup parameters to board_init_r() */
-	movl	%edx, %eax
-	movl	%ecx, %edx
-
-	/* Jump to in-RAM copy of board_init_r() */
-	call	*%ebp
-
-die:	hlt
-	jmp	die
-	hlt
-
-blank_idt_ptr:
-	.word	0		/* limit */
-	.long	0		/* base */