MIPS: Purple: Remove Purple support

The Purple SoC and eval board are not actively maintained since years.
This patch removes the support completely as aggreed with Wolfgang Denk.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>

19 files changed, 1 insertions, 1641 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 4756f14d1..1d7e1f4ac 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -919,7 +919,6 @@ Daniel Engström <daniel@omicron.se>
 Wolfgang Denk <wd@denx.de>
 
 	incaip		MIPS32 4Kc
-	purple		MIPS64 5Kc
 
 Thomas Lange <thomas@corelatus.se>
 	dbau1x00	MIPS32 Au1000
diff --git a/MAKEALL b/MAKEALL
index a732e6adc..e1b928fdb 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -507,9 +507,7 @@ LIST_mips4kc="		\
 	vct_premium_onenand_small	\
 "
 
-LIST_mips5kc="		\
-	purple		\
-"
+LIST_mips5kc=""
 
 LIST_au1xx0="		\
 	dbau1000	\
diff --git a/arch/mips/cpu/Makefile b/arch/mips/cpu/Makefile
index 06df8d17a..816b76cc4 100644
--- a/arch/mips/cpu/Makefile
+++ b/arch/mips/cpu/Makefile
@@ -31,7 +31,6 @@ COBJS-y	= cpu.o interrupts.o
 
 SOBJS-$(CONFIG_INCA_IP)	+= incaip_wdt.o
 COBJS-$(CONFIG_INCA_IP)	+= asc_serial.o incaip_clock.o
-COBJS-$(CONFIG_PURPLE)	+= asc_serial.o
 COBJS-$(CONFIG_SOC_AU1X00) += au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/arch/mips/cpu/asc_serial.c b/arch/mips/cpu/asc_serial.c
index be686c2ae..7239804b9 100644
--- a/arch/mips/cpu/asc_serial.c
+++ b/arch/mips/cpu/asc_serial.c
@@ -3,47 +3,10 @@
  */
 
 #include <config.h>
-
-#ifdef CONFIG_PURPLE
-#define	serial_init	asc_serial_init
-#define	serial_putc	asc_serial_putc
-#define	serial_puts	asc_serial_puts
-#define	serial_getc	asc_serial_getc
-#define	serial_tstc	asc_serial_tstc
-#define	serial_setbrg	asc_serial_setbrg
-#endif
-
 #include <common.h>
 #include <asm/inca-ip.h>
 #include "asc_serial.h"
 
-#ifdef CONFIG_PURPLE
-
-#undef ASC_FIFO_PRESENT
-#define TOUT_LOOP	100000
-
-/* Set base address for second FPI interrupt control register bank */
-#define SFPI_INTCON_BASEADDR	0xBF0F0000
-
-/* Register offset from base address */
-#define FBS_ISR		0x00000000	/* Interrupt status register */
-#define FBS_IMR		0x00000008	/* Interrupt mask register */
-#define FBS_IDIS	0x00000010	/* Interrupt disable register */
-
-/* Interrupt status register bits */
-#define FBS_ISR_AT	0x00000040	/* ASC transmit interrupt */
-#define FBS_ISR_AR	0x00000020	/* ASC receive interrupt */
-#define FBS_ISR_AE	0x00000010	/* ASC error interrupt */
-#define FBS_ISR_AB	0x00000008	/* ASC transmit buffer interrupt */
-#define FBS_ISR_AS      0x00000004	/* ASC start of autobaud detection interrupt */
-#define FBS_ISR_AF	0x00000002	/* ASC end of autobaud detection interrupt */
-
-#else
-
-#define ASC_FIFO_PRESENT
-
-#endif
-
 
 #define SET_BIT(reg, mask)                  reg |= (mask)
 #define CLEAR_BIT(reg, mask)                reg &= (~mask)
@@ -71,10 +34,8 @@ static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC;
 
 int serial_init (void)
 {
-#ifdef CONFIG_INCA_IP
     /* we have to set PMU.EN13 bit to enable an ASC device*/
     INCAASC_PMU_ENABLE(13);
-#endif
 
     /* and we have to set CLC register*/
     CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
@@ -86,7 +47,6 @@ int serial_init (void)
     /* select input port */
     pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
 
-#ifdef ASC_FIFO_PRESENT
     /* TXFIFO's filling level */
     SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
 		    ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL);
@@ -98,25 +58,20 @@ int serial_init (void)
 		    ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL);
     /* enable RXFIFO */
     SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
-#endif
 
     /* enable error signals */
     SET_BIT(pAsc->asc_con, ASCCON_FEN);
     SET_BIT(pAsc->asc_con, ASCCON_OEN);
 
-#ifdef CONFIG_INCA_IP
     /* acknowledge ASC interrupts */
     ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL);
 
     /* disable ASC interrupts */
     ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL);
-#endif
 
-#ifdef ASC_FIFO_PRESENT
     /* set FIFOs into the transparent mode */
     SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN);
     SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN);
-#endif
 
     /* set baud rate */
     serial_setbrg();
@@ -132,11 +87,7 @@ void serial_setbrg (void)
     ulong      uiReloadValue, fdv;
     ulong      f_ASC;
 
-#ifdef CONFIG_INCA_IP
     f_ASC = incaip_get_fpiclk();
-#else
-    f_ASC = ASC_CLOCK_RATE;
-#endif
 
 #ifndef INCAASC_USE_FDV
     fdv = 2;
@@ -261,15 +212,10 @@ static int serial_setopt (void)
 
 void serial_putc (const char c)
 {
-#ifdef ASC_FIFO_PRESENT
     uint txFl = 0;
-#else
-    uint timeout = 0;
-#endif
 
     if (c == '\n') serial_putc ('\r');
 
-#ifdef ASC_FIFO_PRESENT
     /* check do we have a free space in the TX FIFO */
     /* get current filling level */
     do
@@ -277,25 +223,9 @@ void serial_putc (const char c)
 	txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
     }
     while ( txFl == INCAASC_TXFIFO_FULL );
-#else
-
-    while(!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) &
-			   FBS_ISR_AB))
-    {
-	    if (timeout++ > TOUT_LOOP)
-	    {
-		    break;
-	    }
-    }
-#endif
 
     pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
 
-#ifndef ASC_FIFO_PRESENT
-    *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AB |
-								 FBS_ISR_AT;
-#endif
-
     /* check for errors */
     if ( pAsc->asc_con & ASCCON_OE )
     {
@@ -324,10 +254,6 @@ int serial_getc (void)
 
     c = (char)(pAsc->asc_rbuf & symbol_mask);
 
-#ifndef ASC_FIFO_PRESENT
-    *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AR;
-#endif
-
     return c;
 }
 
@@ -335,19 +261,10 @@ int serial_tstc (void)
 {
     int res = 1;
 
-#ifdef ASC_FIFO_PRESENT
     if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
     {
 	res = 0;
     }
-#else
-    if (!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) &
-								FBS_ISR_AR))
-
-    {
-	res = 0;
-    }
-#endif
     else if ( pAsc->asc_con & ASCCON_FE )
     {
 	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);
diff --git a/arch/mips/cpu/cache.S b/arch/mips/cpu/cache.S
index 4b30c89b1..296593805 100644
--- a/arch/mips/cpu/cache.S
+++ b/arch/mips/cpu/cache.S
@@ -311,11 +311,7 @@ LEAF(dcache_enable)
 * RETURNS: N/A
 *
 */
-#if defined(CONFIG_PURPLE)
-# define	CACHE_LOCK_SIZE	(CONFIG_SYS_DCACHE_SIZE/2)
-#else
 # define	CACHE_LOCK_SIZE	(CONFIG_SYS_DCACHE_SIZE)
-#endif
 	.globl	mips_cache_lock
 	.ent	mips_cache_lock
 mips_cache_lock:
diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
index d6bcef6b5..e661d4625 100644
--- a/arch/mips/cpu/start.S
+++ b/arch/mips/cpu/start.S
@@ -67,9 +67,6 @@ _start:
 #if defined(CONFIG_INCA_IP)
 	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
 	.word 0x00000000           /* phase of the flash                    */
-#elif defined(CONFIG_PURPLE)
-	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
-	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
 #else
 	RVECENT(romReserved,2)
 #endif
@@ -203,30 +200,6 @@ _start:
 	 * 128 * 8 == 1024 == 0x400
 	 * so this is address R_VEC+0x400 == 0xbfc00400
 	 */
-#ifdef CONFIG_PURPLE
-/* 0xbfc00400 */
-	.word	0xdc870000
-	.word	0xfca70000
-	.word	0x20840008
-	.word	0x20a50008
-	.word	0x20c6ffff
-	.word	0x14c0fffa
-	.word	0x00000000
-	.word	0x03e00008
-	.word	0x00000000
-	.word	0x00000000
-/* 0xbfc00428 */
-	.word	0xdc870000
-	.word	0xfca70000
-	.word	0x20840008
-	.word	0x20a50008
-	.word	0x20c6ffff
-	.word	0x14c0fffa
-	.word	0x00000000
-	.word	0x03e00008
-	.word	0x00000000
-	.word	0x00000000
-#endif /* CONFIG_PURPLE */
 	.align 4
 reset:
 
@@ -337,17 +310,12 @@ relocate_code:
 	move	a0, t1		/* a0 <-- destination addr	*/
 	sub	a1, t2, t0	/* a1 <-- size			*/
 
-	/* On the purple board we copy the code earlier in a special way
-	 * in order to solve flash problems
-	 */
-#ifndef CONFIG_PURPLE
 1:
 	lw	t3, 0(t0)
 	sw	t3, 0(t1)
 	addu	t0, 4
 	ble	t0, t2, 1b
 	addu	t1, 4		/* delay slot			*/
-#endif
 
 	/* If caches were enabled, we would have to flush them here.
 	 */
diff --git a/arch/mips/include/asm/inca-ip.h b/arch/mips/include/asm/inca-ip.h
index e787a1dee..26f100290 100644
--- a/arch/mips/include/asm/inca-ip.h
+++ b/arch/mips/include/asm/inca-ip.h
@@ -894,12 +894,7 @@
 /*  Module      :  EBU register address and bits                       */
 /***********************************************************************/
 
-#if defined(CONFIG_INCA_IP)
 #define INCA_IP_EBU                          (0xB8000200)
-#elif defined(CONFIG_PURPLE)
-#define INCA_IP_EBU                          (0xB800D800)
-#endif
-
 /***********************************************************************/
 
 
@@ -1495,12 +1490,7 @@ If set and clear bit are written concurrently with 1, the associated bit is not
 /*  Module      :  ASC register address and bits                       */
 /***********************************************************************/
 
-#if defined(CONFIG_INCA_IP)
 #define INCA_IP_ASC                          (0xB8000400)
-#elif defined(CONFIG_PURPLE)
-#define INCA_IP_ASC                          (0xBE500000)
-#endif
-
 /***********************************************************************/
 
 
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
index f31712415..623c4d7f0 100644
--- a/arch/mips/lib/board.c
+++ b/arch/mips/lib/board.c
@@ -162,9 +162,6 @@ void board_init_f(ulong bootflag)
 	init_fnc_t **init_fnc_ptr;
 	ulong addr, addr_sp, len = (ulong)&uboot_end - CONFIG_SYS_MONITOR_BASE;
 	ulong *s;
-#ifdef CONFIG_PURPLE
-	void copy_code (ulong);
-#endif
 
 	/* Pointer is writable since we allocated a register for it.
 	 */
@@ -253,13 +250,6 @@ void board_init_f(ulong bootflag)
 
 	memcpy (id, (void *)gd, sizeof (gd_t));
 
-	/* On the purple board we copy the code in a special way
-	 * in order to solve flash problems
-	 */
-#ifdef CONFIG_PURPLE
-	copy_code(addr);
-#endif
-
 	relocate_code (addr_sp, id, addr);
 
 	/* NOTREACHED - relocate_code() does not return */
diff --git a/board/purple/Makefile b/board/purple/Makefile
deleted file mode 100644
index 10e566da5..000000000
--- a/board/purple/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o flash.o sconsole.o
-SOBJS	= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/purple/config.mk b/board/purple/config.mk
deleted file mode 100644
index 404c3fb31..000000000
--- a/board/purple/config.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Purple board with MIPS 5Kc CPU core
-#
-
-# ROM version
-CONFIG_SYS_TEXT_BASE = 0xB0000000
-
-# RAM version
-#CONFIG_SYS_TEXT_BASE = 0x80100000
diff --git a/board/purple/flash.c b/board/purple/flash.c
deleted file mode 100644
index 5cee35ec2..000000000
--- a/board/purple/flash.c
+++ /dev/null
@@ -1,595 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/inca-ip.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-
-#define	FLASH_ID_MASK	0xFFFFFFFF
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK)
-
-#define FLASH29_REG_ADRS(reg) ((FPWV *)PHYS_FLASH_1 + (reg))
-
-/* FLASH29 command register addresses */
-
-#define FLASH29_REG_FIRST_CYCLE		FLASH29_REG_ADRS (0x1555)
-#define FLASH29_REG_SECOND_CYCLE	FLASH29_REG_ADRS (0x2aaa)
-#define FLASH29_REG_THIRD_CYCLE		FLASH29_REG_ADRS (0x3555)
-#define	FLASH29_REG_FOURTH_CYCLE	FLASH29_REG_ADRS (0x4555)
-#define	FLASH29_REG_FIFTH_CYCLE		FLASH29_REG_ADRS (0x5aaa)
-#define	FLASH29_REG_SIXTH_CYCLE		FLASH29_REG_ADRS (0x6555)
-
-/* FLASH29 command definitions */
-
-#define	FLASH29_CMD_FIRST		0xaaaaaaaa
-#define	FLASH29_CMD_SECOND		0x55555555
-#define	FLASH29_CMD_FOURTH		0xaaaaaaaa
-#define	FLASH29_CMD_FIFTH		0x55555555
-#define	FLASH29_CMD_SIXTH		0x10101010
-
-#define	FLASH29_CMD_SECTOR		0x30303030
-#define	FLASH29_CMD_PROGRAM		0xa0a0a0a0
-#define	FLASH29_CMD_CHIP_ERASE		0x80808080
-#define	FLASH29_CMD_READ_RESET		0xf0f0f0f0
-#define	FLASH29_CMD_AUTOSELECT		0x90909090
-#define FLASH29_CMD_READ		0x70707070
-
-#define IN_RAM_CMD_READ		0x1
-#define IN_RAM_CMD_WRITE	0x2
-
-#define FLASH_WRITE_CMD	((ulong)(flash_write_cmd) & 0x7)+0xbf008000
-#define FLASH_READ_CMD  ((ulong)(flash_read_cmd) & 0x7)+0xbf008000
-
-typedef void (*FUNCPTR_CP)(ulong *source, ulong *destination, ulong nlongs);
-typedef void (*FUNCPTR_RD)(int cmd, FPWV * pFA, char * string, int strLen);
-typedef void (*FUNCPTR_WR)(int cmd, FPWV * pFA, FPW value);
-
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static int write_word(flash_info_t *info, FPWV *dest, FPW data);
-static void flash_get_offsets(ulong base, flash_info_t *info);
-static flash_info_t *flash_get_info(ulong base);
-
-static void load_cmd(ulong cmd);
-static ulong in_ram_cmd = 0;
-
-
-/******************************************************************************
-*
-* Don't change the program architecture
-* This architecture assure the program
-* can be relocated to scratch ram
-*/
-static void flash_read_cmd(int cmd, FPWV * pFA, char * string, int strLen)
-{
-	int i,j;
-	FPW temp,temp1;
-	FPWV *str;
-
-	str = (FPWV *)string;
-
-	j=  strLen/4;
-
-	if(cmd == FLASH29_CMD_AUTOSELECT)
-	   {
-	    *(FLASH29_REG_FIRST_CYCLE)  = FLASH29_CMD_FIRST;
-	    *(FLASH29_REG_SECOND_CYCLE) = FLASH29_CMD_SECOND;
-	    *(FLASH29_REG_THIRD_CYCLE)  = FLASH29_CMD_AUTOSELECT;
-	   }
-
-	if(cmd == FLASH29_CMD_READ)
-	   {
-	    i = 0;
-	    while(i<j)
-	    {
-		temp = *pFA++;
-		temp1 = *(int *)0xa0000000;
-		*(int *)0xbf0081f8 = temp1 + temp;
-		*str++ = temp;
-		i++;
-	    }
-	   }
-
-	 if(cmd == FLASH29_CMD_READ_RESET)
-	 {
-	    *(FLASH29_REG_FIRST_CYCLE)  = FLASH29_CMD_FIRST;
-	    *(FLASH29_REG_SECOND_CYCLE) = FLASH29_CMD_SECOND;
-	    *(FLASH29_REG_THIRD_CYCLE)  = FLASH29_CMD_READ_RESET;
-	 }
-
-	*(int *)0xbf0081f8 = *(int *)0xa0000000;	/* dummy read switch back to sdram interface */
-}
-
-/******************************************************************************
-*
-* Don't change the program architecture
-* This architecture assure the program
-* can be relocated to scratch ram
-*/
-static void flash_write_cmd(int cmd, FPWV * pFA, FPW value)
-{
-	*(FLASH29_REG_FIRST_CYCLE)  = FLASH29_CMD_FIRST;
-	*(FLASH29_REG_SECOND_CYCLE) = FLASH29_CMD_SECOND;
-
-	if (cmd == FLASH29_CMD_SECTOR)
-	   {
-	    *(FLASH29_REG_THIRD_CYCLE)  = FLASH29_CMD_CHIP_ERASE;
-	    *(FLASH29_REG_FOURTH_CYCLE) = FLASH29_CMD_FOURTH;
-	    *(FLASH29_REG_FIFTH_CYCLE)  = FLASH29_CMD_FIFTH;
-	    *pFA		        = FLASH29_CMD_SECTOR;
-	   }
-
-	if (cmd == FLASH29_CMD_SIXTH)
-	   {
-	    *(FLASH29_REG_THIRD_CYCLE)  = FLASH29_CMD_CHIP_ERASE;
-	    *(FLASH29_REG_FOURTH_CYCLE) = FLASH29_CMD_FOURTH;
-	    *(FLASH29_REG_FIFTH_CYCLE)  = FLASH29_CMD_FIFTH;
-	    *(FLASH29_REG_SIXTH_CYCLE)  = FLASH29_CMD_SIXTH;
-	   }
-
-	if (cmd == FLASH29_CMD_PROGRAM)
-	   {
-	    *(FLASH29_REG_THIRD_CYCLE)  = FLASH29_CMD_PROGRAM;
-	    *pFA = value;
-	   }
-
-	if (cmd == FLASH29_CMD_READ_RESET)
-	   {
-	    *(FLASH29_REG_THIRD_CYCLE)  = FLASH29_CMD_READ_RESET;
-	   }
-
-	*(int *)0xbf0081f8 = *(int *)0xa0000000;	/* dummy read switch back to sdram interface */
-}
-
-static void load_cmd(ulong cmd)
-{
-	ulong *src;
-	ulong *dst;
-	FUNCPTR_CP absEntry;
-	ulong func;
-
-	if (in_ram_cmd & cmd) return;
-
-	if (cmd == IN_RAM_CMD_READ)
-	{
-		func = (ulong)flash_read_cmd;
-	}
-	else
-	{
-		func = (ulong)flash_write_cmd;
-	}
-
-	src = (ulong *)(func & 0xfffffff8);
-	dst = (ulong *)0xbf008000;
-	absEntry = (FUNCPTR_CP)(0xbf0081d0);
-	absEntry(src,dst,0x38);
-
-	in_ram_cmd = cmd;
-}
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
-	unsigned long size = 0;
-	int i;
-
-	load_cmd(IN_RAM_CMD_READ);
-
-	/* Init: no FLASHes known */
-	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		ulong flashbase = PHYS_FLASH_1;
-		ulong * buscon = (ulong *) INCA_IP_EBU_EBU_BUSCON0;
-
-		/* Disable write protection */
-		*buscon &= ~INCA_IP_EBU_EBU_BUSCON1_WRDIS;
-
-#if 1
-		memset(&flash_info[i], 0, sizeof(flash_info_t));
-#endif
-
-		flash_info[i].size =
-			flash_get_size((FPW *)flashbase, &flash_info[i]);
-
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n",
-			i, flash_info[i].size);
-		}
-
-		size += flash_info[i].size;
-	}
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
-		      flash_get_info(CONFIG_ENV_ADDR));
-#endif
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
-		 && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM160B) {
-
-		int bootsect_size[4];	/* number of bytes/boot sector  */
-		int sect_size;		/* number of bytes/regular sector */
-
-		bootsect_size[0] = 0x00008000;
-		bootsect_size[1] = 0x00004000;
-		bootsect_size[2] = 0x00004000;
-		bootsect_size[3] = 0x00010000;
-		sect_size =        0x00020000;
-
-		/* set sector offsets for bottom boot block type	*/
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base;
-			base += i < 4 ? bootsect_size[i] : sect_size;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
-	int i;
-	flash_info_t * info;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
-		info = & flash_info[i];
-		if (info->start[0] <= base && base < info->start[0] + info->size)
-			break;
-	}
-
-	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-	uchar *boottype;
-	uchar *bootletter;
-	char *fmt;
-	uchar botbootletter[] = "B";
-	uchar topbootletter[] = "T";
-	uchar botboottype[] = "bottom boot sector";
-	uchar topboottype[] = "top boot sector";
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_STM:	printf ("STM ");		break;
-	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	/* check for top or bottom boot, if it applies */
-	if (info->flash_id & FLASH_BTYPE) {
-		boottype = botboottype;
-		bootletter = botbootletter;
-	}
-	else {
-		boottype = topboottype;
-		bootletter = topbootletter;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM160B:
-		fmt = "29LV160B%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_28F800C3B:
-	case FLASH_28F800C3T:
-		fmt = "28F800C3%s (8 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL800B:
-	case FLASH_INTEL800T:
-		fmt = "28F800B3%s (8 Mbit, %s)\n";
-		break;
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-		fmt = "28F160C3%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL160B:
-	case FLASH_INTEL160T:
-		fmt = "28F160B3%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-		fmt = "28F320C3%s (32 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL320B:
-	case FLASH_INTEL320T:
-		fmt = "28F320B3%s (32 Mbit, %s)\n";
-		break;
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		fmt = "28F640C3%s (64 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL640B:
-	case FLASH_INTEL640T:
-		fmt = "28F640B3%s (64 Mbit, %s)\n";
-		break;
-	default:
-		fmt = "Unknown Chip Type\n";
-		break;
-	}
-
-	printf (fmt, bootletter, boottype);
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20,
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
-	FUNCPTR_RD absEntry;
-	FPW retValue;
-	int flag;
-
-	load_cmd(IN_RAM_CMD_READ);
-	absEntry = (FUNCPTR_RD)FLASH_READ_CMD;
-
-	flag = disable_interrupts();
-	absEntry(FLASH29_CMD_AUTOSELECT,0,0,0);
-	if (flag) enable_interrupts();
-
-	udelay(100);
-
-	flag = disable_interrupts();
-	absEntry(FLASH29_CMD_READ, addr + 1, (char *)&retValue, sizeof(retValue));
-	absEntry(FLASH29_CMD_READ_RESET,0,0,0);
-	if (flag) enable_interrupts();
-
-	udelay(100);
-
-	switch (retValue) {
-
-	case (FPW)AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 8 or 16 MB	*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* => no or unknown flash */
-	}
-
-	flash_get_offsets((ulong)addr, info);
-
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	FPWV *addr;
-	int flag, prot, sect;
-	ulong start, now, last;
-	FUNCPTR_WR absEntry;
-
-	load_cmd(IN_RAM_CMD_WRITE);
-	absEntry = (FUNCPTR_WR)FLASH_WRITE_CMD;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM160B:
-		break;
-	case FLASH_UNKNOWN:
-	default:
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	last  = get_timer(0);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-
-		if (info->protect[sect] != 0)	/* protected, skip it */
-			continue;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr = (FPWV *)(info->start[sect]);
-		absEntry(FLASH29_CMD_SECTOR, addr, 0);
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		start = get_timer(0);
-
-		while ((now = get_timer(start)) <= CONFIG_SYS_FLASH_ERASE_TOUT) {
-
-			/* show that we're waiting */
-			if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
-				putc ('.');
-				last = get_timer(0);
-			}
-		}
-
-		flag = disable_interrupts();
-		absEntry(FLASH29_CMD_READ_RESET,0,0);
-		if (flag)
-			enable_interrupts();
-	}
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-    FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
-    int bytes;	  /* number of bytes to program in current word		*/
-    int left;	  /* number of bytes left to program			*/
-    int i, res;
-
-    for (left = cnt, res = 0;
-	 left > 0 && res == 0;
-	 addr += sizeof(data), left -= sizeof(data) - bytes) {
-
-	bytes = addr & (sizeof(data) - 1);
-	addr &= ~(sizeof(data) - 1);
-
-	/* combine source and destination data so can program
-	 * an entire word of 16 or 32 bits
-	 */
-	for (i = 0; i < sizeof(data); i++) {
-	    data <<= 8;
-	    if (i < bytes || i - bytes >= left )
-		data += *((uchar *)addr + i);
-	    else
-		data += *src++;
-	}
-
-	res = write_word(info, (FPWV *)addr, data);
-    }
-
-    return (res);
-}
-
-static int write_word (flash_info_t *info, FPWV *dest, FPW data)
-{
-    int res = 0;	/* result, assume success	*/
-    FUNCPTR_WR absEntry;
-    int flag;
-
-    /* Check if Flash is (sufficiently) erased */
-    if ((*dest & data) != data) {
-	return (2);
-    }
-
-    if (info->start[0] != PHYS_FLASH_1)
-    {
-	return (3);
-    }
-
-    load_cmd(IN_RAM_CMD_WRITE);
-    absEntry = (FUNCPTR_WR)FLASH_WRITE_CMD;
-
-    flag = disable_interrupts();
-    absEntry(FLASH29_CMD_PROGRAM,dest,data);
-    if (flag) enable_interrupts();
-
-    udelay(100);
-
-    flag = disable_interrupts();
-    absEntry(FLASH29_CMD_READ_RESET,0,0);
-    if (flag) enable_interrupts();
-
-    return (res);
-}
diff --git a/board/purple/lowlevel_init.S b/board/purple/lowlevel_init.S
deleted file mode 100644
index 1bd3edb81..000000000
--- a/board/purple/lowlevel_init.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  Memory sub-system initialization code for PURPLE development board.
- *
- *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/regdef.h>
-
-#define MC_IOGP	0xBF800800
-
-	.globl	lowlevel_init
-lowlevel_init:
-	li	t0, MC_IOGP
-	li	t1, 0xf24
-	sw	t1, 0(t0)
-	jr	ra
-	nop
diff --git a/board/purple/purple.c b/board/purple/purple.c
deleted file mode 100644
index 4e9e7004f..000000000
--- a/board/purple/purple.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/inca-ip.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-#include <asm/cacheops.h>
-#include <asm/reboot.h>
-
-#include "sconsole.h"
-
-#define cache_unroll(base,op)		\
-	__asm__ __volatile__("		\
-		.set noreorder;		\
-		.set mips3;		\
-		cache %1, (%0);		\
-		.set mips0;		\
-		.set reorder"		\
-		:			\
-		: "r" (base),		\
-		  "i" (op));
-
-typedef void (*FUNCPTR)(ulong *source, ulong *destination, ulong nlongs);
-
-extern void	asc_serial_init		(void);
-extern void	asc_serial_putc		(char);
-extern void	asc_serial_puts		(const char *);
-extern int	asc_serial_getc		(void);
-extern int	asc_serial_tstc		(void);
-extern void	asc_serial_setbrg	(void);
-
-void _machine_restart(void)
-{
-	void (*f)(void) = (void *) 0xbfc00000;
-
-	f();
-}
-
-static void sdram_timing_init (ulong size)
-{
-	register uint pass;
-	register uint done;
-	register uint count;
-	register uint p0, p1, p2, p3, p4;
-	register uint addr;
-
-#define WRITE_MC_IOGP_1 *(uint *)0xbf800800 = (p1<<14)+(p2<<13)+(p4<<8)+(p0<<4)+p3;
-#define WRITE_MC_IOGP_2 *(uint *)0xbf800800 = (p1<<14)+(p2<<13)+((p4-16)<<8)+(p0<<4)+p3;
-
-	done = 0;
-	p0 = 2;
-	while (p0 < 4 && done == 0) {
-	    p1 = 0;
-	    while (p1 < 2 && done == 0) {
-		p2 = 0;
-		while (p2 < 2 && done == 0) {
-		    p3 = 0;
-		    while (p3 < 16 && done == 0) {
-			count = 0;
-			p4 = 0;
-			while (p4 < 32 && done == 0) {
-			    WRITE_MC_IOGP_1;
-
-			    for (addr = CKSEG1 + 0x4000;
-				 addr < CKSEG1ADDR (size);
-				 addr = addr + 4) {
-					*(uint *) addr = 0xaa55aa55;
-			    }
-
-			    pass = 1;
-
-			    for (addr = CKSEG1 + 0x4000;
-				 addr < CKSEG1ADDR (size) && pass == 1;
-				 addr = addr + 4) {
-					if (*(uint *) addr != 0xaa55aa55)
-						pass = 0;
-			    }
-
-			    if (pass == 1) {
-				count++;
-			    } else {
-				count = 0;
-			    }
-
-			    if (count == 32) {
-				WRITE_MC_IOGP_2;
-				done = 1;
-			    }
-			    p4++;
-			}
-			p3++;
-		    }
-		    p2++;
-		}
-		p1++;
-	    }
-	    p0++;
-	    if (p0 == 1)
-		p0++;
-	}
-}
-
-phys_size_t initdram(int board_type)
-{
-	/* The only supported number of SDRAM banks is 4.
-	 */
-#define CONFIG_SYS_NB	4
-
-	ulong	cfgpb0	= *INCA_IP_SDRAM_MC_CFGPB0;
-	ulong	cfgdw	= *INCA_IP_SDRAM_MC_CFGDW;
-	int	cols	= cfgpb0 & 0xF;
-	int	rows	= (cfgpb0 & 0xF0) >> 4;
-	int	dw	= cfgdw & 0xF;
-	ulong	size	= (1 << (rows + cols)) * (1 << (dw - 1)) * CONFIG_SYS_NB;
-	void (*  sdram_init) (ulong);
-
-	sdram_init = (void (*)(ulong)) CKSEG0ADDR(&sdram_timing_init);
-
-	sdram_init(0x10000);
-
-	return size;
-}
-
-int checkboard (void)
-{
-
-	unsigned long chipid = *(unsigned long *)0xB800C800;
-
-	printf ("Board: Purple PLB 2800 chip version %ld, ", chipid & 0xF);
-
-	printf("CPU Speed %d MHz\n", CPU_CLOCK_RATE/1000000);
-
-	set_io_port_base(0);
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	asc_serial_init ();
-
-	sconsole_putc   = asc_serial_putc;
-	sconsole_puts   = asc_serial_puts;
-	sconsole_getc   = asc_serial_getc;
-	sconsole_tstc   = asc_serial_tstc;
-	sconsole_setbrg = asc_serial_setbrg;
-
-	sconsole_flush ();
-	return (0);
-}
-
-/*******************************************************************************
-*
-* copydwords - copy one buffer to another a long at a time
-*
-* This routine copies the first <nlongs> longs from <source> to <destination>.
-*/
-static void copydwords (ulong *source, ulong *destination, ulong nlongs)
-{
-	ulong temp,temp1;
-	ulong *dstend = destination + nlongs;
-
-	while (destination < dstend) {
-		temp = *source++;
-		/* dummy read from sdram */
-		temp1 = *(ulong *)0xa0000000;
-		/* avoid optimization from compliler */
-		*(ulong *)0xbf0081f8 = temp1 + temp;
-		*destination++ = temp;
-
-	}
-}
-
-/*******************************************************************************
-*
-* copyLongs - copy one buffer to another a long at a time
-*
-* This routine copies the first <nlongs> longs from <source> to <destination>.
-*/
-static void copyLongs (ulong *source, ulong *destination, ulong nlongs)
-{
-	FUNCPTR absEntry;
-
-	absEntry = (FUNCPTR)(0xbf008000+((ulong)copydwords & 0x7));
-	absEntry(source, destination, nlongs);
-}
-
-/*******************************************************************************
-*
-* programLoad - load program into ram
-*
-* This routine load copydwords into ram
-*
-*/
-static void programLoad(void)
-{
-	FUNCPTR absEntry;
-	ulong *src,*dst;
-
-	src = (ulong *)(CONFIG_SYS_TEXT_BASE + 0x428);
-	dst = (ulong *)0xbf0081d0;
-
-	absEntry = (FUNCPTR)(CONFIG_SYS_TEXT_BASE + 0x400);
-	absEntry(src,dst,0x6);
-
-	src = (ulong *)((ulong)copydwords & 0xfffffff8);
-	dst = (ulong *)0xbf008000;
-
-	absEntry(src,dst,0x38);
-}
-
-/*******************************************************************************
-*
-* copy_code - copy u-boot image from flash to RAM
-*
-* This routine is needed to solve flash problems on this board
-*
-*/
-void copy_code (ulong dest_addr)
-{
-	extern long uboot_end_data;
-	unsigned long start;
-	unsigned long end;
-
-	/* load copydwords into ram
-	 */
-	programLoad();
-
-	/* copy u-boot code
-	 */
-	copyLongs((ulong *)CONFIG_SYS_MONITOR_BASE,
-		  (ulong *)dest_addr,
-		  ((ulong)&uboot_end_data - CONFIG_SYS_MONITOR_BASE + 3) / 4);
-
-
-	/* flush caches
-	 */
-
-	start = CKSEG0;
-	end = start + CONFIG_SYS_DCACHE_SIZE;
-	while(start < end) {
-		cache_unroll(start,Index_Writeback_Inv_D);
-		start += CONFIG_SYS_CACHELINE_SIZE;
-	}
-
-	start = CKSEG0;
-	end = start + CONFIG_SYS_ICACHE_SIZE;
-	while(start < end) {
-		cache_unroll(start,Index_Invalidate_I);
-		start += CONFIG_SYS_CACHELINE_SIZE;
-	}
-}
-
-#ifdef CONFIG_PLB2800_ETHER
-int board_eth_init(bd_t *bis)
-{
-	return plb2800_eth_initialize(bis);
-}
-#endif
diff --git a/board/purple/sconsole.c b/board/purple/sconsole.c
deleted file mode 100644
index cd9d871b5..000000000
--- a/board/purple/sconsole.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-
-#include "sconsole.h"
-
-void	(*sconsole_putc) (char) = 0;
-void	(*sconsole_puts) (const char *) = 0;
-int	(*sconsole_getc) (void) = 0;
-int	(*sconsole_tstc) (void) = 0;
-void	(*sconsole_setbrg) (void) = 0;
-
-int serial_init (void)
-{
-	sconsole_buffer_t *sb = SCONSOLE_BUFFER;
-
-	sb->pos  = 0;
-	sb->size = 0;
-	sb->max_size = CONFIG_SYS_SCONSOLE_SIZE - sizeof (sconsole_buffer_t);
-
-	return (0);
-}
-
-void serial_putc (char c)
-{
-	if (sconsole_putc) {
-		(*sconsole_putc) (c);
-	} else {
-		sconsole_buffer_t *sb = SCONSOLE_BUFFER;
-
-		if (c) {
-			sb->data[sb->pos++] = c;
-			if (sb->pos == sb->max_size) {
-				sb->pos = 0;
-			}
-			if (sb->size < sb->max_size) {
-				sb->size++;
-			}
-		}
-	}
-}
-
-void serial_puts (const char *s)
-{
-	if (sconsole_puts) {
-		(*sconsole_puts) (s);
-	} else {
-		sconsole_buffer_t *sb = SCONSOLE_BUFFER;
-
-		while (*s) {
-			sb->data[sb->pos++] = *s++;
-			if (sb->pos == sb->max_size) {
-				sb->pos = 0;
-			}
-			if (sb->size < sb->max_size) {
-				sb->size++;
-			}
-		}
-	}
-}
-
-int serial_getc (void)
-{
-	if (sconsole_getc) {
-		return (*sconsole_getc) ();
-	} else {
-		return 0;
-	}
-}
-
-int serial_tstc (void)
-{
-	if (sconsole_tstc) {
-		return (*sconsole_tstc) ();
-	} else {
-		return 0;
-	}
-}
-
-void serial_setbrg (void)
-{
-	if (sconsole_setbrg) {
-		(*sconsole_setbrg) ();
-	}
-}
-
-void sconsole_flush (void)
-{
-	if (sconsole_putc) {
-		sconsole_buffer_t *sb = SCONSOLE_BUFFER;
-		unsigned int end = sb->pos < sb->size
-				? sb->pos + sb->max_size - sb->size
-				: sb->pos - sb->size;
-
-		while (sb->size) {
-			(*sconsole_putc) (sb->data[end++]);
-			if (end == sb->max_size) {
-				end = 0;
-			}
-			sb->size--;
-		}
-	}
-}
diff --git a/board/purple/sconsole.h b/board/purple/sconsole.h
deleted file mode 100644
index baed5fbb8..000000000
--- a/board/purple/sconsole.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SCONSOLE_H_
-#define _SCONSOLE_H_
-
-#include <config.h>
-
-typedef struct sconsole_buffer_s {
-	unsigned long size;
-	unsigned long max_size;
-	unsigned long pos;
-	char data[1];
-} sconsole_buffer_t;
-
-#define SCONSOLE_BUFFER		((sconsole_buffer_t *) CONFIG_SYS_SCONSOLE_ADDR)
-
-extern void	(* sconsole_putc)	(char);
-extern void	(* sconsole_puts)	(const char *);
-extern int	(* sconsole_getc)	(void);
-extern int	(* sconsole_tstc)	(void);
-extern void	(* sconsole_setbrg)	(void);
-
-extern void	sconsole_flush		(void);
-
-#endif
diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds
deleted file mode 100644
index 719f268f2..000000000
--- a/board/purple/u-boot.lds
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk Engineering, <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
-*/
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text       :
-	{
-	  arch/mips/cpu/start.o		(.text)
-	  board/purple/lowlevel_init.o	(.text)
-	  . = DEFINED(env_offset) ? env_offset : .;
-	  common/env_embedded.o	(.ppcenv)
-
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data  : { *(.data) }
-
-	. = .;
-	_gp = ALIGN(16) + 0x7ff0;
-
-	.got : {
-	  __got_start = .;
-	  *(.got)
-	  __got_end = .;
-	}
-
-	.sdata  : { *(.sdata) }
-
-	.u_boot_cmd : {
-	  __u_boot_cmd_start = .;
-	  *(.u_boot_cmd)
-	  __u_boot_cmd_end = .;
-	}
-
-	uboot_end_data = .;
-	num_got_entries = (__got_end - __got_start) >> 2;
-
-	. = ALIGN(4);
-	.sbss (NOLOAD)  : { *(.sbss) }
-	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
-	uboot_end = .;
-}
diff --git a/boards.cfg b/boards.cfg
index 45c3102b0..63b1cdaa4 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -228,7 +228,6 @@ incaip_100MHz                mips        mips        incaip              -
 incaip_133MHz                mips        mips        incaip              -              -           incaip:CPU_CLOCK_RATE=133000000
 incaip_150MHz                mips        mips        incaip              -              -           incaip:CPU_CLOCK_RATE=150000000
 pb1000                       mips        mips        pb1x00              -              -           pb1x00:PB1000
-purple                       mips        mips
 qemu_mips                    mips        mips        qemu-mips           -              -           qemu-mips
 tb0229                       mips        mips
 vct_premium                  mips        mips        vct                 micronas       -           vct:VCT_PREMIUM
diff --git a/doc/README.Purple b/doc/README.Purple
deleted file mode 100644
index 0098e26c1..000000000
--- a/doc/README.Purple
+++ /dev/null
@@ -1,84 +0,0 @@
-Installation Instructions:
---------------------------
-
-1. Put the s2 switch into the following position:
-
-	Off On
-	------
-	|x   |
-	|   x|
-	|x   |
-	|   X|
-	------
-
-   Put the s3 switch into the following position:
-
-	Off On
-	------
-	| x  |
-	| x  |
-	|   x|
-	|   x|
-	------
-
-   Put the s4 switch into the following position:
-
-	Off On
-	------
-	|x   |
-	|x   |
-	|x   |
-	|x   |
-	|x   |
-	|   x|
-	|   x|
-	|x   |
-	------
-
-2. Connect to the serial console and to the BDI. Power on. On the
-   serial line, you should see:
-
-	PURPLE@1.2>
-
-3. Type '8'. No echo will be displayed. In response, you should get:
-
-	7A(pass)
-
-4. From BDI, enter command:
-
-	mmw 0xb800d860 0x0042c7ff
-
-5. Then, from BDI:
-
-	erase 0xB0000000
-	erase 0xB0008000
-	erase 0xB000C000
-	erase 0xB0010000
-	erase 0xB0020000
-
-	prog 0xB0000000 <u-boot.bin> bin
-
-6. Power off. Restore the original S2 switch position:
-
-	Off On
-	------
-	|   x|
-	|   x|
-	|x   |
-	|   X|
-	------
-
-   Power on.  U-Boot should come up.
-
-
-Implementation Notes:
----------------------
-
-Due to the RAM/flash bus arbitration problem the suggested workaround
-had to be implemented. It works okay. On the downside is that you
-can't really check whether 'erase' is complete by polling flash as it
-is usually done. Instead, the flash driver simply waits for a given
-time and assumes that erase then has passed. This behaviour is
-identical to what the VxWorks driver does; also, the same timeout (6
-seconds) was chosen. Note that this timeout applies for each erase
-operation, i. e. per erased sector.
diff --git a/include/configs/purple.h b/include/configs/purple.h
deleted file mode 100644
index 25d8ebe95..000000000
--- a/include/configs/purple.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file contains the configuration parameters for the PURPLE board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MIPS32		1	/* MIPS 5Kc CPU core	*/
-#define CONFIG_PURPLE		1	/* on a PURPLE Board	*/
-
-#define CPU_CLOCK_RATE	125000000   /* 125 MHz clock for the MIPS core */
-#define ASC_CLOCK_RATE	 62500000   /* 62.5 MHz ASC clock              */
-
-#define INFINEON_EBU_BOOTCFG	0xE0CC
-
-#define CONFIG_STACKSIZE	(128 * 1024)
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-
-#define CONFIG_BAUDRATE		19200
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off\0"				\
-	"addmisc=setenv bootargs ${bootargs} "				\
-		"console=ttyS0,${baudrate} "				\
-		"ethaddr=${ethaddr} "					\
-		"panic=1\0"						\
-	"flash_nfs=run nfsargs addip addmisc;"				\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip addmisc;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 80500000 ${bootfile};"				\
-		"run nfsargs addip addmisc;bootm\0"			\
-	"rootpath=/opt/eldk/mips_5KC\0"					\
-	"bootfile=/tftpboot/purple/uImage\0"				\
-	"kernel_addr=B0040000\0"					\
-	"ramdisk_addr=B0100000\0"					\
-	"u-boot=/tftpboot/purple/u-boot.bin\0"				\
-	"load=tftp 80500000 ${u-boot}\0"				\
-	"update=protect off 1:0-4;era 1:0-4;"				\
-		"cp.b 80500000 B0000000 ${filesize}\0"			\
-	""
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-
-
-#define CONFIG_SYS_SDRAM_BASE		0x80000000
-
-#define CONFIG_SYS_INIT_SP_OFFSET      0x400000
-
-#define CONFIG_SYS_MALLOC_LEN		128*1024
-
-#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory      */
-#define	CONFIG_SYS_PROMPT		"PURPLE # "	/* Monitor Command Prompt    */
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size   */
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
-#define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_CLOCK_RATE/2)
-#define CONFIG_SYS_HZ			1000
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x80500000	/* default load address	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x80200000
-#define CONFIG_SYS_MEMTEST_END		0x80800000
-
-#define	CONFIG_MISC_INIT_R
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	(35)	/* max number of sectors on one chip */
-
-#define PHYS_FLASH_1		0xb0000000 /* Flash Bank #1 */
-
-/* The following #defines are needed to get flash environment right */
-#define	CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(6 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(6 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-
-/* Address and size of Primary Environment Sector	*/
-#define CONFIG_ENV_ADDR		0xB0008000
-#define CONFIG_ENV_SIZE		0x4000
-
-#define CONFIG_FLASH_32BIT
-#define CONFIG_NR_DRAM_BANKS	1
-
-#define CONFIG_PLB2800_ETHER
-#define CONFIG_NET_MULTI
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE		16384
-#define CONFIG_SYS_ICACHE_SIZE		16384
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-/*
- * Temporary buffer for serial data until the real serial driver
- * is initialised (memtest will destroy this buffer)
- */
-#define CONFIG_SYS_SCONSOLE_ADDR     (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET - \
-			       CONFIG_SYS_DCACHE_SIZE / 2)
-#define CONFIG_SYS_SCONSOLE_SIZE     (CONFIG_SYS_DCACHE_SIZE / 4)
-
-#endif	/* __CONFIG_H */