fix various comments

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

5 files changed, 25 insertions, 26 deletions

diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index b922485ed..31f408dfa 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -57,7 +57,7 @@ _fiq:			.word fiq
  * Startup Code (reset vector)
  *
  * do important init only if we don't start from RAM!
- * - relocate armboot to ram
+ * - relocate armboot to RAM
  * - setup stack
  * - jump to second stage
  */
@@ -90,7 +90,7 @@ IRQ_STACK_START:
 .globl FIQ_STACK_START
 FIQ_STACK_START:
 	.word 0x0badc0de
-#endif
+#endif /* CONFIG_USE_IRQ */
 
 
 /****************************************************************************/
@@ -100,18 +100,18 @@ FIQ_STACK_START:
 /****************************************************************************/
 
 reset:
-	mrs	r0,cpsr			/* set the cpu to SVC32 mode	    */
+	mrs	r0,cpsr			/* set the CPU to SVC32 mode	    */
 	bic	r0,r0,#0x1f		/* (superviser mode, M=10011)	    */
 	orr	r0,r0,#0x13
 	msr	cpsr,r0
 
 	/*
 	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
+	 * not when booting from RAM!
 	 */
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 	bl	cpu_init_crit		/* we do sys-critical inits	    */
-#endif
+#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
 
 #ifndef CONFIG_SKIP_RELOCATE_UBOOT
 relocate:				/* relocate U-Boot to RAM	    */
@@ -130,7 +130,7 @@ copy_loop:
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end addreee [r2]    */
 	ble	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
+#endif /* !CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
 stack_setup:
@@ -139,7 +139,7 @@ stack_setup:
 	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo			    */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
+#endif /* CONFIG_USE_IRQ */
 	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
 
 clear_bss:
@@ -172,11 +172,11 @@ _start_armboot: .word start_armboot
 #undef OSCR
 #undef OWER
 #undef OIER
-#endif
+#endif /* CONFIG_PXA250 || CONFIG_CPU_MONAHANS */
 #ifdef CONFIG_PXA250
 #undef RCSR
 #undef CCCR
-#endif
+#endif /* CONFIG_PXA250 */
 
 /* Interrupt-Controller base address					    */
 IC_BASE:	   .word	   0x40d00000
@@ -197,18 +197,18 @@ OSTIMER_BASE:	.word	0x40a00000
 #ifdef CONFIG_CPU_MONAHANS
 # ifndef CFG_MONAHANS_RUN_MODE_OSC_RATIO
 #  error "You have to define CFG_MONAHANS_RUN_MODE_OSC_RATIO!!"
-# endif
+# endif /* !CFG_MONAHANS_RUN_MODE_OSC_RATIO */
 # ifndef CFG_MONAHANS_TURBO_RUN_MODE_RATIO
 #  define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
-# endif
-#else /* ! CONFIG_CPU_MONAHANS */
+# endif /* !CFG_MONAHANS_TURBO_RUN_MODE_RATIO */
+#else /* !CONFIG_CPU_MONAHANS */
 #ifdef CFG_CPUSPEED
 CC_BASE:	.word	0x41300000
 #define CCCR	0x00
 cpuspeed:	.word	CFG_CPUSPEED
-#else
+#else /* !CFG_CPUSPEED */
 #error "You have to define CFG_CPUSPEED!!"
-#endif
+#endif /* CFG_CPUSPEED */
 #endif /* CONFIG_CPU_MONAHANS */
 
 	/* takes care the CP15 update has taken place */
@@ -225,7 +225,7 @@ cpu_init_crit:
 	ldr	r0, IC_BASE
 	mov	r1, #0x00
 	str	r1, [r0, #ICMR]
-#else
+#else /* CONFIG_CPU_MONAHANS */
 	/* Step 1 - Enable CP6 permission */
 	mrc	p15, 0, r1, c15, c1, 0	@ read CPAR
 	orr	r1, r1, #0x40
@@ -244,14 +244,14 @@ cpu_init_crit:
 	ldr	r1, =CKENB
 	ldr	r2, =(CKENB_6_IRQ)
 	str	r2, [r1]
-#endif
+#endif /* !CONFIG_CPU_MONAHANS */
 
 	/* set clock speed */
 #ifdef CONFIG_CPU_MONAHANS
 	ldr	r0, =ACCR
 	ldr	r1, =(((CFG_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CFG_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
 	str	r1, [r0]
-#else /* ! CONFIG_CPU_MONAHANS */
+#else /* !CONFIG_CPU_MONAHANS */
 #ifdef CFG_CPUSPEED
 	ldr	r0, CC_BASE
 	ldr	r1, cpuspeed
@@ -451,7 +451,7 @@ fiq:
 	bl	do_fiq			/* effiction fiq_save_user_regs	    */
 	irq_restore_user_regs
 
-#else
+#else /* !CONFIG_USE_IRQ */
 
 	.align	5
 irq:
@@ -465,7 +465,7 @@ fiq:
 	bad_save_user_regs
 	bl	do_fiq
 
-#endif
+#endif /* CONFIG_USE_IRQ */
 
 /****************************************************************************/
 /*									    */
diff --git a/doc/README.nand b/doc/README.nand
index c5c5ef29e..647a6b8e6 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -79,7 +79,7 @@ Commands:
 
    nand write.jffs2 addr ofs|partition size
       Like `write', but blocks that are marked bad are skipped and the
-      is written to the next block instead. This allows writing writing
+      data is written to the next block instead. This allows writing
       a JFFS2 image, as long as the image is short enough to fit even
       after skipping the bad blocks. Compact images, such as those
       produced by mkfs.jffs2 should work well, but loading an image copied
diff --git a/drivers/net/ne2000.c b/drivers/net/ne2000.c
index c978d62ef..b10065753 100644
--- a/drivers/net/ne2000.c
+++ b/drivers/net/ne2000.c
@@ -839,7 +839,7 @@ void uboot_push_packet_len(int len) {
 	}
 	dp83902a_recv(&pbuf[0], len);
 
-	/*Just pass it to the upper layer*/
+	/* Just pass it to the upper layer */
 	NetReceive(&pbuf[0], len);
 }
 
@@ -902,7 +902,6 @@ int eth_init(bd_t *bd) {
 }
 
 void eth_halt() {
-
 	PRINTK("### eth_halt\n");
 	if(initialized)
 		dp83902a_stop();
@@ -910,8 +909,8 @@ void eth_halt() {
 }
 
 int eth_rx() {
-dp83902a_poll();
-return 1;
+	dp83902a_poll();
+	return 1;
 }
 
 int eth_send(volatile void *packet, int length) {
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 49ff80fd3..4cc4a7d1b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -129,7 +129,7 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 #define NAND_ECC_HW3_256	2
 /* Hardware ECC 3 byte ECC per 512 Byte data */
 #define NAND_ECC_HW3_512	3
-/* Hardware ECC 3 byte ECC per 512 Byte data */
+/* Hardware ECC 6 byte ECC per 512 Byte data */
 #define NAND_ECC_HW6_512	4
 /* Hardware ECC 8 byte ECC per 512 Byte data */
 #define NAND_ECC_HW8_512	6
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index 840a59659..e2147cb90 100644
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -73,7 +73,7 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block)
 	nand_command(mtd, block, 0, CFG_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB);
 
 	/*
-	 * Read on byte
+	 * Read one byte
 	 */
 	if (this->read_byte(mtd) != 0xff)
 		return 1;