Added missing nand.c for NC650 board

Signed-off-by: dzu@denx.de <dzu@eddie.localdomain>

1 files changed, 117 insertions, 0 deletions

diff --git a/board/nc650/nand.c b/board/nc650/nand.c
new file mode 100644
index 000000000..f27e536e5
--- /dev/null
+++ b/board/nc650/nand.c
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2006 Detlev Zundel, dzu@denx.de
+ * (C) Copyright 2006 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <nand.h>
+
+#if defined(CONFIG_IDS852_REV1)
+/*
+ *	hardware specific access to control-lines
+ */
+static void nc650_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip *this = mtd->priv;
+
+	switch(cmd) {
+		case NAND_CTL_SETCLE:
+			this->IO_ADDR_W += 2;
+			break;
+		case NAND_CTL_CLRCLE:
+			this->IO_ADDR_W -= 2;
+			break;
+		case NAND_CTL_SETALE:
+			this->IO_ADDR_W += 1;
+			break;
+		case NAND_CTL_CLRALE:
+			this->IO_ADDR_W -= 1;
+			break;
+		case NAND_CTL_SETNCE:
+		case NAND_CTL_CLRNCE:
+			/* nop */
+			break;
+	}
+}
+#elif defined(CONFIG_IDS852_REV2)
+/*
+ *	hardware specific access to control-lines
+ */
+static void nc650_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip *this = mtd->priv;
+
+	switch(cmd) {
+		case NAND_CTL_SETCLE:
+ 			*(((volatile __u8 *) this->IO_ADDR_W) + 0xa) = 0; 
+			break;
+		case NAND_CTL_CLRCLE:
+ 			*(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0; 
+			break;
+		case NAND_CTL_SETALE:
+ 			*(((volatile __u8 *) this->IO_ADDR_W) + 0x9) = 0; 
+			break;
+		case NAND_CTL_CLRALE:
+ 			*(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0; 
+			break;
+		case NAND_CTL_SETNCE:
+ 			*(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0; 
+			break;
+		case NAND_CTL_CLRNCE:
+ 			*(((volatile __u8 *) this->IO_ADDR_W) + 0xc) = 0; 
+			break;
+	}
+}
+#else
+#error Unknown IDS852 module revision
+#endif
+
+/*
+ * Board-specific NAND initialization. The following members of the
+ * argument are board-specific (per include/linux/mtd/nand.h):
+ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
+ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
+ * - hwcontrol: hardwarespecific function for accesing control-lines
+ * - dev_ready: hardwarespecific function for  accesing device ready/busy line
+ * - enable_hwecc?: function to enable (reset)  hardware ecc generator. Must
+ *   only be provided if a hardware ECC is available
+ * - eccmode: mode of ecc, see defines
+ * - chip_delay: chip dependent delay for transfering data from array to
+ *   read regs (tR)
+ * - options: various chip options. They can partly be set to inform
+ *   nand_scan about special functionality. See the defines for further
+ *   explanation
+ * Members with a "?" were not set in the merged testing-NAND branch,
+ * so they are not set here either.
+ */
+void board_nand_init(struct nand_chip *nand)
+{
+
+	nand->hwcontrol = nc650_hwcontrol;
+	nand->eccmode = NAND_ECC_SOFT;
+	nand->chip_delay = 12;
+/*	nand->options = NAND_SAMSUNG_LP_OPTIONS;*/
+}
+#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */