* Clean up tools/bmp_logo.c to not add trailing white space

* Patch by Hinko Kocevar, 21 Aug 2004:
  - Group common framebuffer functions in common/lcd.c
  - Group common framebuffer macros and #defines in include/lcd.h
  - Provide calc_fbsize() for video ATAG

10 files changed, 1205 insertions, 1608 deletions

diff --git a/CHANGELOG b/CHANGELOG
index ce1e7342a..9fefb6781 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,13 +2,20 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Clean up tools/bmp_logo.c to not add trailing white space
+
+* Patch by Hinko Kocevar, 21 Aug 2004:
+  - Group common framebuffer functions in common/lcd.c
+  - Group common framebuffer macros and #defines in include/lcd.h
+  - Provide calc_fbsize() for video ATAG
+
 * Patch by Sam Song, 21 August 2004:
   - Fix a typo in README
   - Align "(RO)" output for "flinfo" after "protect on"
   - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
     ratio 1:1 when core frequency less than 50MHz
 
-* Patches by himba, 21 Aug 2004:
+* Patches by Hinko Kocevar, 21 Aug 2004:
   - fix some "use of label at end of compound statement" warnings
   - Define type of LCD panel on lubbock board if CONFIG_LCD is used
 
diff --git a/common/Makefile b/common/Makefile
index 943da5e47..7d92cabda 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -27,7 +27,7 @@ LIB	= libcommon.a
 
 AOBJS	=
 
-COBJS	= main.o ACEX1K.o altera.o bedbug.o \
+COBJS	= main.o ACEX1K.o altera.o bedbug.o circbuf.o \
 	  cmd_ace.o cmd_autoscript.o \
 	  cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \
 	  cmd_cache.o cmd_console.o \
@@ -44,10 +44,11 @@ COBJS	= main.o ACEX1K.o altera.o bedbug.o \
 	  environment.o env_common.o \
 	  env_nand.o env_dataflash.o env_flash.o env_eeprom.o env_nvram.o env_nowhere.o exports.o \
 	  flash.o fpga.o \
-	  hush.o kgdb.o lists.o lynxkdi.o memsize.o miiphybb.o miiphyutil.o \
+	  hush.o kgdb.o lcd.o lists.o lynxkdi.o \
+	  memsize.o miiphybb.o miiphyutil.o \
 	  s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o \
 	  usb.o usb_kbd.o usb_storage.o \
-	  virtex2.o xilinx.o circbuf.o
+	  virtex2.o xilinx.o
 
 OBJS	= $(AOBJS) $(COBJS)
 
diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c
index 3a971334b..daa54e776 100644
--- a/common/cmd_bmp.c
+++ b/common/cmd_bmp.c
@@ -28,6 +28,7 @@
 #include <common.h>
 #include <bmp_layout.h>
 #include <command.h>
+#include <asm/byteorder.h>
 
 #if (CONFIG_COMMANDS & CFG_CMD_BMP)
 
diff --git a/common/lcd.c b/common/lcd.c
new file mode 100644
index 000000000..85b44cad1
--- /dev/null
+++ b/common/lcd.c
@@ -0,0 +1,740 @@
+/*
+ * Common LCD routines for supported CPUs
+ *
+ * (C) Copyright 2001-2002
+ * Wolfgang Denk, DENX Software Engineering -- wd@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************/
+/* ** HEADER FILES							*/
+/************************************************************************/
+
+/* #define DEBUG */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <version.h>
+#include <stdarg.h>
+#include <linux/types.h>
+#include <devices.h>
+#if defined(CONFIG_POST)
+#include <post.h>
+#endif
+#include <lcd.h>
+
+#if defined(CONFIG_PXA250)
+#include <asm/byteorder.h>
+#endif
+
+#if defined(CONFIG_MPC823)
+#include <watchdog.h>
+#include <lcdvideo.h>
+#endif
+
+
+#ifdef CONFIG_LCD
+
+/************************************************************************/
+/* ** FONT DATA								*/
+/************************************************************************/
+#include <video_font.h>		/* Get font data, width and height	*/
+
+
+ulong lcd_setmem (ulong addr);
+
+static void lcd_drawchars (ushort x, ushort y, uchar *str, int count);
+static inline void lcd_puts_xy (ushort x, ushort y, uchar *s);
+static inline void lcd_putc_xy (ushort x, ushort y, uchar  c);
+
+static int lcd_init (void *lcdbase);
+
+static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
+extern void lcd_ctrl_init (void *lcdbase);
+extern void lcd_enable (void);
+static void *lcd_logo (void);
+
+
+#if LCD_BPP == LCD_COLOR8
+extern void lcd_setcolreg (ushort regno,
+				ushort red, ushort green, ushort blue);
+#endif
+#if LCD_BPP == LCD_MONOCHROME
+extern void lcd_initcolregs (void);
+#endif
+
+static int lcd_getbgcolor (void);
+static void lcd_setfgcolor (int color);
+static void lcd_setbgcolor (int color);
+
+char lcd_is_enabled = 0;
+extern vidinfo_t panel_info;
+
+#ifdef	NOT_USED_SO_FAR
+static void lcd_getcolreg (ushort regno,
+				ushort *red, ushort *green, ushort *blue);
+static int lcd_getfgcolor (void);
+#endif	/* NOT_USED_SO_FAR */
+
+/************************************************************************/
+
+/*----------------------------------------------------------------------*/
+
+static void console_scrollup (void)
+{
+#if 1
+	/* Copy up rows ignoring the first one */
+	memcpy (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE);
+
+	/* Clear the last one */
+	memset (CONSOLE_ROW_LAST, COLOR_MASK(lcd_color_bg), CONSOLE_ROW_SIZE);
+#else
+	/*
+	 * Poor attempt to optimize speed by moving "long"s.
+	 * But the code is ugly, and not a bit faster :-(
+	 */
+	ulong *t = (ulong *)CONSOLE_ROW_FIRST;
+	ulong *s = (ulong *)CONSOLE_ROW_SECOND;
+	ulong    l = CONSOLE_SCROLL_SIZE / sizeof(ulong);
+	uchar  c = lcd_color_bg & 0xFF;
+	ulong val= (c<<24) | (c<<16) | (c<<8) | c;
+
+	while (l--)
+		*t++ = *s++;
+
+	t = (ulong *)CONSOLE_ROW_LAST;
+	l = CONSOLE_ROW_SIZE / sizeof(ulong);
+
+	while (l-- > 0)
+		*t++ = val;
+#endif
+}
+
+/*----------------------------------------------------------------------*/
+
+static inline void console_back (void)
+{
+	if (--console_col < 0) {
+		console_col = CONSOLE_COLS-1 ;
+		if (--console_row < 0) {
+			console_row = 0;
+		}
+	}
+
+	lcd_putc_xy (console_col * VIDEO_FONT_WIDTH,
+		     console_row * VIDEO_FONT_HEIGHT,
+		     ' ');
+}
+
+/*----------------------------------------------------------------------*/
+
+static inline void console_newline (void)
+{
+	++console_row;
+	console_col = 0;
+
+	/* Check if we need to scroll the terminal */
+	if (console_row >= CONSOLE_ROWS) {
+		/* Scroll everything up */
+		console_scrollup () ;
+		--console_row;
+	}
+}
+
+/*----------------------------------------------------------------------*/
+
+void lcd_putc (const char c)
+{
+	if (!lcd_is_enabled) {
+		serial_putc(c);
+		return;
+	}
+
+	switch (c) {
+	case '\r':	console_col = 0;
+			return;
+
+	case '\n':	console_newline();
+			return;
+
+	case '\t':	/* Tab (8 chars alignment) */
+			console_col |=  8;
+			console_col &= ~7;
+
+			if (console_col >= CONSOLE_COLS) {
+				console_newline();
+			}
+			return;
+
+	case '\b':	console_back();
+			return;
+
+	default:	lcd_putc_xy (console_col * VIDEO_FONT_WIDTH,
+				     console_row * VIDEO_FONT_HEIGHT,
+				     c);
+			if (++console_col >= CONSOLE_COLS) {
+				console_newline();
+			}
+			return;
+	}
+	/* NOTREACHED */
+}
+
+/*----------------------------------------------------------------------*/
+
+void lcd_puts (const char *s)
+{
+	if (!lcd_is_enabled) {
+		serial_puts (s);
+		return;
+	}
+
+	while (*s) {
+		lcd_putc (*s++);
+	}
+}
+
+/************************************************************************/
+/* ** Low-Level Graphics Routines					*/
+/************************************************************************/
+
+static void lcd_drawchars (ushort x, ushort y, uchar *str, int count)
+{
+	uchar *dest;
+	ushort off, row;
+
+	dest = (uchar *)(lcd_base + y * lcd_line_length + x * (1 << LCD_BPP) / 8);
+	off  = x * (1 << LCD_BPP) % 8;
+
+	for (row=0;  row < VIDEO_FONT_HEIGHT;  ++row, dest += lcd_line_length)  {
+		uchar *s = str;
+		uchar *d = dest;
+		int i;
+
+#if LCD_BPP == LCD_MONOCHROME
+		uchar rest = *d & -(1 << (8-off));
+		uchar sym;
+#endif
+		for (i=0; i<count; ++i) {
+			uchar c, bits;
+
+			c = *s++;
+			bits = video_fontdata[c * VIDEO_FONT_HEIGHT + row];
+
+#if LCD_BPP == LCD_MONOCHROME
+			sym  = (COLOR_MASK(lcd_color_fg) & bits) |
+			       (COLOR_MASK(lcd_color_bg) & ~bits);
+
+			*d++ = rest | (sym >> off);
+			rest = sym << (8-off);
+#elif LCD_BPP == LCD_COLOR8
+			for (c=0; c<8; ++c) {
+				*d++ = (bits & 0x80) ?
+						lcd_color_fg : lcd_color_bg;
+				bits <<= 1;
+			}
+#elif LCD_BPP == LCD_COLOR16
+			for (c=0; c<16; ++c) {
+				*d++ = (bits & 0x80) ?
+						lcd_color_fg : lcd_color_bg;
+				bits <<= 1;
+			}
+#endif
+		}
+#if LCD_BPP == LCD_MONOCHROME
+		*d  = rest | (*d & ((1 << (8-off)) - 1));
+#endif
+	}
+}
+
+/*----------------------------------------------------------------------*/
+
+static inline void lcd_puts_xy (ushort x, ushort y, uchar *s)
+{
+#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
+	lcd_drawchars (x, y+BMP_LOGO_HEIGHT, s, strlen (s));
+#else
+	lcd_drawchars (x, y, s, strlen (s));
+#endif
+}
+
+/*----------------------------------------------------------------------*/
+
+static inline void lcd_putc_xy (ushort x, ushort y, uchar c)
+{
+#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
+	lcd_drawchars (x, y+BMP_LOGO_HEIGHT, &c, 1);
+#else
+	lcd_drawchars (x, y, &c, 1);
+#endif
+}
+
+/************************************************************************/
+/**  Small utility to check that you got the colours right		*/
+/************************************************************************/
+#ifdef LCD_TEST_PATTERN
+
+#define	N_BLK_VERT	2
+#define	N_BLK_HOR	3
+
+static int test_colors[N_BLK_HOR*N_BLK_VERT] = {
+	CONSOLE_COLOR_RED,	CONSOLE_COLOR_GREEN,	CONSOLE_COLOR_YELLOW,
+	CONSOLE_COLOR_BLUE,	CONSOLE_COLOR_MAGENTA,	CONSOLE_COLOR_CYAN,
+};
+
+static void test_pattern (void)
+{
+	ushort v_max  = panel_info.vl_row;
+	ushort h_max  = panel_info.vl_col;
+	ushort v_step = (v_max + N_BLK_VERT - 1) / N_BLK_VERT;
+	ushort h_step = (h_max + N_BLK_HOR  - 1) / N_BLK_HOR;
+	ushort v, h;
+	uchar *pix = (uchar *)lcd_base;
+
+	printf ("[LCD] Test Pattern: %d x %d [%d x %d]\n",
+		h_max, v_max, h_step, v_step);
+
+	/* WARNING: Code silently assumes 8bit/pixel */
+	for (v=0; v<v_max; ++v) {
+		uchar iy = v / v_step;
+		for (h=0; h<h_max; ++h) {
+			uchar ix = N_BLK_HOR * iy + (h/h_step);
+			*pix++ = test_colors[ix];
+		}
+	}
+}
+#endif /* LCD_TEST_PATTERN */
+
+
+/************************************************************************/
+/* ** GENERIC Initialization Routines					*/
+/************************************************************************/
+
+int drv_lcd_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	device_t lcddev;
+	int rc;
+
+	lcd_base = (void *)(gd->fb_base);
+
+	lcd_line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
+
+	lcd_init (lcd_base);		/* LCD initialization */
+
+	/* Device initialization */
+	memset (&lcddev, 0, sizeof (lcddev));
+
+	strcpy (lcddev.name, "lcd");
+	lcddev.ext   = 0;			/* No extensions */
+	lcddev.flags = DEV_FLAGS_OUTPUT;	/* Output only */
+	lcddev.putc  = lcd_putc;		/* 'putc' function */
+	lcddev.puts  = lcd_puts;		/* 'puts' function */
+
+	rc = device_register (&lcddev);
+
+	return (rc == 0) ? 1 : rc;
+}
+
+/*----------------------------------------------------------------------*/
+static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+#if LCD_BPP == LCD_MONOCHROME
+	/* Setting the palette */
+	lcd_initcolregs();
+
+#elif LCD_BPP == LCD_COLOR8
+	/* Setting the palette */
+	lcd_setcolreg  (CONSOLE_COLOR_BLACK,       0,    0,    0);
+	lcd_setcolreg  (CONSOLE_COLOR_RED,	0xFF,    0,    0);
+	lcd_setcolreg  (CONSOLE_COLOR_GREEN,       0, 0xFF,    0);
+	lcd_setcolreg  (CONSOLE_COLOR_YELLOW,	0xFF, 0xFF,    0);
+	lcd_setcolreg  (CONSOLE_COLOR_BLUE,        0,    0, 0xFF);
+	lcd_setcolreg  (CONSOLE_COLOR_MAGENTA,	0xFF,    0, 0xFF);
+	lcd_setcolreg  (CONSOLE_COLOR_CYAN,	   0, 0xFF, 0xFF);
+	lcd_setcolreg  (CONSOLE_COLOR_GREY,	0xAA, 0xAA, 0xAA);
+	lcd_setcolreg  (CONSOLE_COLOR_WHITE,	0xFF, 0xFF, 0xFF);
+#endif
+
+#ifndef CFG_WHITE_ON_BLACK
+	lcd_setfgcolor (CONSOLE_COLOR_BLACK);
+	lcd_setbgcolor (CONSOLE_COLOR_WHITE);
+#else
+	lcd_setfgcolor (CONSOLE_COLOR_WHITE);
+	lcd_setbgcolor (CONSOLE_COLOR_BLACK);
+#endif	/* CFG_WHITE_ON_BLACK */
+
+#ifdef	LCD_TEST_PATTERN
+	test_pattern();
+#else
+	/* set framebuffer to background color */
+	memset ((char *)lcd_base,
+		COLOR_MASK(lcd_getbgcolor()),
+		lcd_line_length*panel_info.vl_row);
+#endif
+	/* Paint the logo and retrieve LCD base address */
+	debug ("[LCD] Drawing the logo...\n");
+	lcd_console_address = lcd_logo ();
+
+	console_col = 0;
+	console_row = 0;
+
+	return (0);
+}
+
+U_BOOT_CMD(
+	cls,	1,	1,	lcd_clear,
+	"cls     - clear screen\n",
+	NULL
+);
+
+/*----------------------------------------------------------------------*/
+
+static int lcd_init (void *lcdbase)
+{
+	/* Initialize the lcd controller */
+	debug ("[LCD] Initializing LCD frambuffer at %p\n", lcdbase);
+
+	lcd_ctrl_init (lcdbase);
+	lcd_clear (NULL, 1, 1, NULL);	/* dummy args */
+	lcd_enable ();
+
+	/* Initialize the console */
+	console_col = 0;
+#ifdef LCD_INFO_BELOW_LOGO
+	console_row = 7 + BMP_LOGO_HEIGHT / VIDEO_FONT_HEIGHT;
+#else
+	console_row = 1;	/* leave 1 blank line below logo */
+#endif
+	lcd_is_enabled = 1;
+
+	return 0;
+}
+
+
+/************************************************************************/
+/* ** ROM capable initialization part - needed to reserve FB memory	*/
+/************************************************************************/
+/*
+ * This is called early in the system initialization to grab memory
+ * for the LCD controller.
+ * Returns new address for monitor, after reserving LCD buffer memory
+ *
+ * Note that this is running from ROM, so no write access to global data.
+ */
+ulong lcd_setmem (ulong addr)
+{
+	ulong size;
+	int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
+
+	debug ("LCD panel info: %d x %d, %d bit/pix\n",
+		panel_info.vl_col, panel_info.vl_row, NBITS (panel_info.vl_bpix) );
+
+	size = line_length * panel_info.vl_row;
+
+	/* Round up to nearest full page */
+	size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
+
+	/* Allocate pages for the frame buffer. */
+	addr -= size;
+
+	debug ("Reserving %ldk for LCD Framebuffer at: %08lx\n", size>>10, addr);
+
+	return (addr);
+}
+
+/*----------------------------------------------------------------------*/
+
+static void lcd_setfgcolor (int color)
+{
+	lcd_color_fg = color & 0x0F;
+}
+
+/*----------------------------------------------------------------------*/
+
+static void lcd_setbgcolor (int color)
+{
+	lcd_color_bg = color & 0x0F;
+}
+
+/*----------------------------------------------------------------------*/
+
+#ifdef	NOT_USED_SO_FAR
+static int lcd_getfgcolor (void)
+{
+	return lcd_color_fg;
+}
+#endif	/* NOT_USED_SO_FAR */
+
+/*----------------------------------------------------------------------*/
+
+static int lcd_getbgcolor (void)
+{
+	return lcd_color_bg;
+}
+
+/*----------------------------------------------------------------------*/
+
+/************************************************************************/
+/* ** Chipset depending Bitmap / Logo stuff...                          */
+/************************************************************************/
+#ifdef CONFIG_LCD_LOGO
+void bitmap_plot (int x, int y)
+{
+	ushort *cmap;
+	ushort i, j;
+	uchar *bmap;
+	uchar *fb;
+	ushort *fb16;
+#if defined(CONFIG_PXA250)
+	struct pxafb_info *fbi = &panel_info.pxa;
+#elif defined(CONFIG_MPC823)
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile cpm8xx_t *cp = &(immr->im_cpm);
+#endif
+
+	debug ("Logo: width %d  height %d  colors %d  cmap %d\n",
+		BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS,
+		sizeof(bmp_logo_palette)/(sizeof(ushort)));
+
+	bmap = &bmp_logo_bitmap[0];
+	fb   = (char *)(lcd_base + y * lcd_line_length + x);
+
+	if (NBITS(panel_info.vl_bpix) < 12) {
+		/* Leave room for default color map */
+#if defined(CONFIG_PXA250)
+		cmap = (ushort *)fbi->palette;
+#elif defined(CONFIG_MPC823)
+		cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]);
+#endif
+
+		WATCHDOG_RESET();
+
+		/* Set color map */
+		for (i=0; i<(sizeof(bmp_logo_palette)/(sizeof(ushort))); ++i) {
+			ushort colreg = bmp_logo_palette[i];
+#ifdef  CFG_INVERT_COLORS
+			*cmap++ = 0xffff - colreg;
+#else
+			*cmap++ = colreg;
+#endif
+		}
+
+		WATCHDOG_RESET();
+
+		for (i=0; i<BMP_LOGO_HEIGHT; ++i) {
+			memcpy (fb, bmap, BMP_LOGO_WIDTH);
+			bmap += BMP_LOGO_WIDTH;
+			fb   += panel_info.vl_col;
+		}
+	}
+	else { /* true color mode */
+		fb16 = (ushort *)(lcd_base + y * lcd_line_length + x);
+		for (i=0; i<BMP_LOGO_HEIGHT; ++i) {
+			for (j=0; j<BMP_LOGO_WIDTH; j++) {
+				fb16[j] = bmp_logo_palette[(bmap[j])];
+				}
+			bmap += BMP_LOGO_WIDTH;
+			fb16 += panel_info.vl_col;
+		}
+	}
+
+	WATCHDOG_RESET();
+}
+#endif /* CONFIG_LCD_LOGO */
+
+/*----------------------------------------------------------------------*/
+#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
+/*
+ * Display the BMP file located at address bmp_image.
+ * Only uncompressed.
+ */
+int lcd_display_bitmap(ulong bmp_image, int x, int y)
+{
+	ushort *cmap;
+	ushort i, j;
+	uchar *fb;
+	bmp_image_t *bmp=(bmp_image_t *)bmp_image;
+	uchar *bmap;
+	ushort padded_line;
+	unsigned long width, height;
+	unsigned colors,bpix;
+	unsigned long compression;
+#if defined(CONFIG_PXA250)
+	struct pxafb_info *fbi = &panel_info.pxa;
+#elif defined(CONFIG_MPC823)
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile cpm8xx_t *cp = &(immr->im_cpm);
+#endif
+
+	if (!((bmp->header.signature[0]=='B') &&
+		(bmp->header.signature[1]=='M'))) {
+		printf ("Error: no valid bmp image at %lx\n", bmp_image);
+		return 1;
+}
+
+	width = le32_to_cpu (bmp->header.width);
+	height = le32_to_cpu (bmp->header.height);
+	colors = 1<<le16_to_cpu (bmp->header.bit_count);
+	compression = le32_to_cpu (bmp->header.compression);
+
+	bpix = NBITS(panel_info.vl_bpix);
+
+	if ((bpix != 1) && (bpix != 8)) {
+		printf ("Error: %d bit/pixel mode not supported by U-Boot\n",
+			bpix);
+		return 1;
+	}
+
+	if (bpix != le16_to_cpu(bmp->header.bit_count)) {
+		printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n",
+			bpix,
+			le16_to_cpu(bmp->header.bit_count));
+		return 1;
+	}
+
+	debug ("Display-bmp: %d x %d  with %d colors\n",
+		(int)width, (int)height, (int)colors);
+
+	if (bpix==8) {
+#if defined(CONFIG_PXA250)
+		cmap = (ushort *)fbi->palette;
+#elif defined(CONFIG_MPC823)
+		cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
+#endif
+
+		/* Set color map */
+		for (i=0; i<colors; ++i) {
+			bmp_color_table_entry_t cte = bmp->color_table[i];
+			ushort colreg =
+				( ((cte.red)   << 8) & 0xf800) |
+				( ((cte.green) << 4) & 0x07e0) |
+				( (cte.blue) & 0x001f) ;
+
+#ifdef CFG_INVERT_COLORS
+			*cmap++ = 0xffff - colreg;
+#else
+			*cmap++ = colreg;
+#endif
+		}
+	}
+
+	padded_line = (width&0x3) ? ((width&~0x3)+4) : (width);
+	if ((x + width)>panel_info.vl_col)
+		width = panel_info.vl_col - x;
+	if ((y + height)>panel_info.vl_row)
+		height = panel_info.vl_row - y;
+
+	bmap = (uchar *)bmp + le32_to_cpu (bmp->header.data_offset);
+	fb   = (uchar *) (lcd_base +
+		(y + height - 1) * lcd_line_length + x);
+	for (i = 0; i < height; ++i) {
+		for (j = 0; j < width ; j++)
+#if defined(CONFIG_PXA250)
+			*(fb++)=*(bmap++);
+#elif defined(CONFIG_MPC823)
+			*(fb++)=255-*(bmap++);
+#endif
+		bmap += (width - padded_line);
+		fb   -= (width + lcd_line_length);
+	}
+
+	return (0);
+}
+#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
+
+
+static void *lcd_logo (void)
+{
+#ifdef LCD_INFO
+	DECLARE_GLOBAL_DATA_PTR;
+
+	char info[80];
+	char temp[32];
+#endif /* LCD_INFO */
+
+#ifdef CONFIG_SPLASH_SCREEN
+	char *s;
+	ulong addr;
+	static int do_splash = 1;
+
+	if (do_splash && (s = getenv("splashimage")) != NULL) {
+		addr = simple_strtoul(s, NULL, 16);
+		do_splash = 0;
+
+		if (lcd_display_bitmap (addr, 0, 0) == 0) {
+			return ((void *)lcd_base);
+		}
+	}
+#endif /* CONFIG_SPLASH_SCREEN */
+
+#ifdef CONFIG_LCD_LOGO
+	bitmap_plot (0, 0);
+#endif /* CONFIG_LCD_LOGO */
+
+#ifdef CONFIG_MPC823
+#ifdef LCD_INFO
+	sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__);
+	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, info, strlen(info));
+
+	sprintf (info, "(C) 2004 DENX Software Engineering");
+	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
+					info, strlen(info));
+
+	sprintf (info, "    Wolfgang DENK, wd@denx.de");
+	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
+					info, strlen(info));
+#ifdef LCD_INFO_BELOW_LOGO
+	sprintf (info, "MPC823 CPU at %s MHz",
+		strmhz(temp, gd->cpu_clk));
+	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
+					info, strlen(info));
+	sprintf (info, "  %ld MB RAM, %ld MB Flash",
+		gd->ram_size >> 20,
+		gd->bd->bi_flashsize >> 20 );
+	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
+					info, strlen(info));
+#else
+	/* leave one blank line */
+
+	sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
+		strmhz(temp, gd->cpu_clk),
+		gd->ram_size >> 20,
+		gd->bd->bi_flashsize >> 20 );
+	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
+					info, strlen(info));
+
+#endif /* CONFIG_MPC823 */
+#endif /* LCD_INFO_BELOW_LOGO */
+#endif /* LCD_INFO */
+
+#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
+	return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length));
+#else
+	return ((void *)lcd_base);
+#endif /* CONFIG_LCD_LOGO */
+}
+
+/************************************************************************/
+/************************************************************************/
+
+#endif /* CONFIG_LCD */
diff --git a/cpu/mpc8xx/lcd.c b/cpu/mpc8xx/lcd.c
index cce0cc2b8..cc5867686 100644
--- a/cpu/mpc8xx/lcd.c
+++ b/cpu/mpc8xx/lcd.c
@@ -54,74 +54,6 @@
 #undef LCD_INFO
 #endif
 
-/* #define LCD_TEST_PATTERN */	/* color backgnd for frame/color adjust */
-/* #define CFG_INVERT_COLORS */	/* Not needed - adjust vl_dp instead 	*/
-/************************************************************************/
-
-/************************************************************************/
-/* ** BITMAP DISPLAY SUPPORT  -- should probably be moved elsewhere	*/
-/************************************************************************/
-
-#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
-#include <bmp_layout.h>
-#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
-
-/************************************************************************/
-/* ** FONT AND LOGO DATA						*/
-/************************************************************************/
-
-#include <video_font.h>		/* Get font data, width and height	*/
-
-#ifdef CONFIG_LCD_LOGO
-# include <bmp_logo.h>		/* Get logo data, width and height	*/
-#endif
-
-/************************************************************************/
-/************************************************************************/
-
-/*
- *  Information about displays we are using.  This is for configuring
- *  the LCD controller and memory allocation.  Someone has to know what
- *  is connected, as we can't autodetect anything.
- */
-#define CFG_HIGH	0	/* Pins are active high */
-#define CFG_LOW		1	/* Pins are active low */
-
-typedef struct vidinfo {
-    ushort	vl_col;		/* Number of columns (i.e. 640) */
-    ushort	vl_row;		/* Number of rows (i.e. 480) */
-    ushort	vl_width;	/* Width of display area in millimeters */
-    ushort	vl_height;	/* Height of display area in millimeters */
-
-    /* LCD configuration register.
-    */
-    u_char	vl_clkp;	/* Clock polarity */
-    u_char	vl_oep;		/* Output Enable polarity */
-    u_char	vl_hsp;		/* Horizontal Sync polarity */
-    u_char	vl_vsp;		/* Vertical Sync polarity */
-    u_char	vl_dp;		/* Data polarity */
-    u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
-    u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
-    u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
-    u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
-    u_char	vl_tft;		/* 0 = passive, 1 = TFT */
-
-    /* Horizontal control register.  Timing from data sheet.
-    */
-    ushort	vl_wbl;		/* Wait between lines */
-
-    /* Vertical control register.
-    */
-    u_char	vl_vpw;		/* Vertical sync pulse width */
-    u_char	vl_lcdac;	/* LCD AC timing */
-    u_char	vl_wbf;		/* Wait between frames */
-} vidinfo_t;
-
-#define LCD_MONOCHROME	0
-#define LCD_COLOR2	1
-#define LCD_COLOR4	2
-#define LCD_COLOR8	3
-
 /*----------------------------------------------------------------------*/
 #ifdef CONFIG_KYOCERA_KCS057QV1AJ
 /*
@@ -129,7 +61,7 @@ typedef struct vidinfo {
  */
 #define LCD_BPP	LCD_COLOR4
 
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH,
     LCD_BPP, 1, 0, 1, 0,  5, 0, 0, 0
 		/* wbl, vpw, lcdac, wbf */
@@ -142,7 +74,7 @@ static vidinfo_t panel_info = {
 /*
  *  Hitachi SP19X001-. Active, color, single scan.
  */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     640, 480, 154, 116, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH,
     LCD_COLOR8, 1, 0, 1, 0, 0, 0, 0, 0
 		/* wbl, vpw, lcdac, wbf */
@@ -155,7 +87,7 @@ static vidinfo_t panel_info = {
 /*
  *  NEC NL6448AC33-18. Active, color, single scan.
  */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
     3, 0, 0, 1, 1, 144, 2, 0, 33
 		/* wbl, vpw, lcdac, wbf */
@@ -167,7 +99,7 @@ static vidinfo_t panel_info = {
 /*
  *  NEC NL6448BC20-08.  6.5", 640x480. Active, color, single scan.
  */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
     3, 0, 0, 1, 1, 144, 2, 0, 33
 		/* wbl, vpw, lcdac, wbf */
@@ -179,7 +111,7 @@ static vidinfo_t panel_info = {
 /*
  *  NEC NL6448BC33-54. 10.4", 640x480. Active, color, single scan.
  */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     640, 480, 212, 158, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
     3, 0, 0, 1, 1, 144, 2, 0, 33
 		/* wbl, vpw, lcdac, wbf */
@@ -191,7 +123,7 @@ static vidinfo_t panel_info = {
 /*
  *  SHARP LQ104V7DS01. 6.5", 640x480. Active, color, single scan.
  */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_LOW,
     3, 0, 0, 1, 1, 25, 1, 0, 33
 		/* wbl, vpw, lcdac, wbf */
@@ -204,7 +136,7 @@ static vidinfo_t panel_info = {
  * Sharp 320x240. Active, color, single scan.  It isn't 16x9, and I am
  * not sure what it is.......
  */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH,
     3, 0, 0, 1, 1, 15, 4, 0, 3
 };
@@ -215,9 +147,10 @@ static vidinfo_t panel_info = {
 /*
  * Sharp LQ057Q3DC02 display. Active, color, single scan.
  */
+#undef LCD_DF
 #define LCD_DF 12
 
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
     3, 0, 0, 1, 1, 15, 4, 0, 3
 		/* wbl, vpw, lcdac, wbf */
@@ -230,7 +163,7 @@ static vidinfo_t panel_info = {
 /*
  * Sharp LQ64D341 display, 640x480. Active, color, single scan.
  */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     640, 480, 0, 0, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
     3, 0, 0, 1, 1, 128, 16, 0, 32
 		/* wbl, vpw, lcdac, wbf */
@@ -241,7 +174,7 @@ static vidinfo_t panel_info = {
 /*
  * Sharp LQ065T9DR51U display, 400x240. Active, color, single scan.
  */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     400, 240, 143, 79, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH,
     3, 0, 0, 1, 1, 248, 4, 0, 35
 		/* wbl, vpw, lcdac, wbf */
@@ -253,7 +186,7 @@ static vidinfo_t panel_info = {
 /*
  * Sharp LQ084V1DG21 display, 640x480. Active, color, single scan.
  */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     640, 480, 171, 129, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_LOW,
     3, 0, 0, 1, 1, 160, 3, 0, 48
 		/* wbl, vpw, lcdac, wbf */
@@ -266,7 +199,7 @@ static vidinfo_t panel_info = {
 /*
  * HLD1045 display, 640x480. Active, color, single scan.
  */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     640, 480, 0, 0, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
     3, 0, 0, 1, 1, 160, 3, 0, 48
 		/* wbl, vpw, lcdac, wbf */
@@ -278,7 +211,7 @@ static vidinfo_t panel_info = {
 /*
  * Prime View V16C6448AC
  */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     640, 480, 130, 98, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
     3, 0, 0, 1, 1, 144, 2, 0, 35
 		/* wbl, vpw, lcdac, wbf */
@@ -300,7 +233,7 @@ static vidinfo_t panel_info = {
 #define OPTREX_BPP	0	/* 0 - monochrome,     1 bpp */
 				/* 1 -  4 grey levels, 2 bpp */
 				/* 2 - 16 grey levels, 4 bpp */
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_LOW,
     OPTREX_BPP, 0, 0, 0, 0, 0, 0, 0, 0, 4
 };
@@ -314,525 +247,64 @@ static vidinfo_t panel_info = {
 #define LCD_BPP		LCD_MONOCHROME
 #define LCD_DF		10
 
-static vidinfo_t panel_info = {
+vidinfo_t panel_info = {
     320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_LOW,
     LCD_BPP,  0, 0, 0, 0, 33, 0, 0, 0
 };
 #endif
 /*----------------------------------------------------------------------*/
 
-#if defined(LCD_INFO_BELOW_LOGO)
-# define LCD_INFO_X		0
-# define LCD_INFO_Y		(BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
-#elif defined(CONFIG_LCD_LOGO)
-# define LCD_INFO_X		(BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
-# define LCD_INFO_Y		(VIDEO_FONT_HEIGHT)
-#else
-# define LCD_INFO_X		(VIDEO_FONT_WIDTH)
-# define LCD_INFO_Y		(VIDEO_FONT_HEIGHT)
-#endif
-
-#ifndef LCD_BPP
-#define LCD_BPP			LCD_COLOR8
-#endif
-#ifndef LCD_DF
-#define LCD_DF			1
-#endif
 
-#define NBITS(bit_code)		(1 << (bit_code))
-#define NCOLORS(bit_code)	(1 << NBITS(bit_code))
+int lcd_line_length;
 
-static int lcd_line_length;
-
-static int lcd_color_fg;
-static int lcd_color_bg;
-
-char lcd_is_enabled = 0;		/* Indicate that LCD is enabled	*/
+int lcd_color_fg;
+int lcd_color_bg;
 
 /*
  * Frame buffer memory information
  */
-static void *lcd_base;			/* Start of framebuffer memory	*/
-static void *lcd_console_address;	/* Start of console buffer	*/
-
-
-/************************************************************************/
-/* ** CONSOLE CONSTANTS							*/
-/************************************************************************/
-
-#if LCD_BPP == LCD_MONOCHROME
-
-/*
- * Simple color definitions
- */
-#define CONSOLE_COLOR_BLACK	 0
-#define CONSOLE_COLOR_WHITE	 1	/* Must remain last / highest */
-
-#else
-
-/*
- * Simple color definitions
- */
-#define CONSOLE_COLOR_BLACK	 0
-#define CONSOLE_COLOR_RED	 1
-#define CONSOLE_COLOR_GREEN	 2
-#define CONSOLE_COLOR_YELLOW	 3
-#define CONSOLE_COLOR_BLUE	 4
-#define CONSOLE_COLOR_MAGENTA	 5
-#define CONSOLE_COLOR_CYAN	 6
-#define CONSOLE_COLOR_GREY	14
-#define CONSOLE_COLOR_WHITE	15	/* Must remain last / highest */
-
-#endif
-
-#if defined(CONFIG_LCD_LOGO) && (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET)
-#error Default Color Map overlaps with Logo Color Map
-#endif
-
-/************************************************************************/
-
-#ifndef PAGE_SIZE
-#define	PAGE_SIZE	4096
-#endif
-
-
-/************************************************************************/
-/* ** CONSOLE DEFINITIONS & FUNCTIONS					*/
-/************************************************************************/
-
-#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
-#define CONSOLE_ROWS		((panel_info.vl_row-BMP_LOGO_HEIGHT) \
-					/ VIDEO_FONT_HEIGHT)
-#else
-#define CONSOLE_ROWS		(panel_info.vl_row / VIDEO_FONT_HEIGHT)
-#endif
-#define CONSOLE_COLS		(panel_info.vl_col / VIDEO_FONT_WIDTH)
-#define CONSOLE_ROW_SIZE	(VIDEO_FONT_HEIGHT * lcd_line_length)
-#define CONSOLE_ROW_FIRST	(lcd_console_address)
-#define CONSOLE_ROW_SECOND	(lcd_console_address + CONSOLE_ROW_SIZE)
-#define CONSOLE_ROW_LAST	(lcd_console_address + CONSOLE_SIZE \
-					- CONSOLE_ROW_SIZE)
-#define CONSOLE_SIZE		(CONSOLE_ROW_SIZE * CONSOLE_ROWS)
-#define CONSOLE_SCROLL_SIZE	(CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-
-#if  LCD_BPP == LCD_MONOCHROME
-#define COLOR_MASK(c)		((c)      | (c) << 1 | (c) << 2 | (c) << 3 | \
-				 (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
-#elif LCD_BPP == LCD_COLOR8
-#define COLOR_MASK(c)		(c)
-#else
-#error Unsupported LCD BPP.
-#endif
+void *lcd_base;			/* Start of framebuffer memory	*/
+void *lcd_console_address;	/* Start of console buffer	*/
 
-static short console_col;
-static short console_row;
+short console_col;
+short console_row;
 
 /************************************************************************/
 
-ulong	lcd_setmem (ulong addr);
-
-static void	lcd_drawchars  (ushort x, ushort y, uchar *str, int count);
-static inline void lcd_puts_xy (ushort x, ushort y, uchar *s);
-static inline void lcd_putc_xy (ushort x, ushort y, uchar  c);
-
-static int	lcd_init (void *lcdbase);
-
-static int	lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
-static void	lcd_ctrl_init (void *lcdbase);
-static void	lcd_enable (void);
-static void    *lcd_logo (void);
+void lcd_ctrl_init (void *lcdbase);
+void lcd_enable (void);
 #if LCD_BPP == LCD_COLOR8
-static void	lcd_setcolreg (ushort regno,
+void lcd_setcolreg (ushort regno,
 				ushort red, ushort green, ushort blue);
 #endif
 #if LCD_BPP == LCD_MONOCHROME
-static void	lcd_initcolregs (void);
+void lcd_initcolregs (void);
 #endif
-static int	lcd_getbgcolor (void);
-static void	lcd_setfgcolor (int color);
-static void	lcd_setbgcolor (int color);
 
 #if defined(CONFIG_RBC823)
-void	lcd_disable (void);
+void lcd_disable (void);
 #endif
 
-#ifdef	NOT_USED_SO_FAR
-static void	lcd_getcolreg (ushort regno,
-				ushort *red, ushort *green, ushort *blue);
-static int	lcd_getfgcolor (void);
-#endif	/* NOT_USED_SO_FAR */
-
-/************************************************************************/
-
-/*----------------------------------------------------------------------*/
-
-static void console_scrollup (void)
-{
-#if 1
-	/* Copy up rows ignoring the first one */
-	memcpy (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE);
-
-	/* Clear the last one */
-	memset (CONSOLE_ROW_LAST, COLOR_MASK(lcd_color_bg), CONSOLE_ROW_SIZE);
-#else
-	/*
-	 * Poor attempt to optimize speed by moving "long"s.
-	 * But the code is ugly, and not a bit faster :-(
-	 */
-	ulong *t = (ulong *)CONSOLE_ROW_FIRST;
-	ulong *s = (ulong *)CONSOLE_ROW_SECOND;
-	ulong    l = CONSOLE_SCROLL_SIZE / sizeof(ulong);
-	uchar  c = lcd_color_bg & 0xFF;
-	ulong val= (c<<24) | (c<<16) | (c<<8) | c;
-
-	while (l--)
-		*t++ = *s++;
-
-	t = (ulong *)CONSOLE_ROW_LAST;
-	l = CONSOLE_ROW_SIZE / sizeof(ulong);
-
-	while (l-- > 0)
-		*t++ = val;
-#endif
-}
-
-/*----------------------------------------------------------------------*/
-
-static inline void console_back (void)
-{
-	if (--console_col < 0) {
-		console_col = CONSOLE_COLS-1 ;
-		if (--console_row < 0) {
-			console_row = 0;
-		}
-	}
-
-	lcd_putc_xy (console_col * VIDEO_FONT_WIDTH,
-		     console_row * VIDEO_FONT_HEIGHT,
-		     ' ');
-}
-
-/*----------------------------------------------------------------------*/
-
-static inline void console_newline (void)
-{
-	++console_row;
-	console_col = 0;
-
-	/* Check if we need to scroll the terminal */
-	if (console_row >= CONSOLE_ROWS) {
-		/* Scroll everything up */
-		console_scrollup () ;
-		--console_row;
-	}
-}
-
-/*----------------------------------------------------------------------*/
-
-void lcd_putc (const char c)
-{
-	if (!lcd_is_enabled) {
-		serial_putc(c);
-		return;
-	}
-
-	switch (c) {
-	case '\r':	console_col = 0;
-			return;
-
-	case '\n':	console_newline();
-			return;
-
-	case '\t':	/* Tab (8 chars alignment) */
-			console_col |=  8;
-			console_col &= ~7;
-
-			if (console_col >= CONSOLE_COLS) {
-				console_newline();
-			}
-			return;
-
-	case '\b':	console_back();
-			return;
-
-	default:	lcd_putc_xy (console_col * VIDEO_FONT_WIDTH,
-				     console_row * VIDEO_FONT_HEIGHT,
-				     c);
-			if (++console_col >= CONSOLE_COLS) {
-				console_newline();
-			}
-			return;
-	}
-	/* NOTREACHED */
-}
-
-/*----------------------------------------------------------------------*/
-
-void lcd_puts (const char *s)
-{
-	if (!lcd_is_enabled) {
-		serial_puts (s);
-		return;
-	}
-
-	while (*s) {
-		lcd_putc (*s++);
-	}
-}
-
-/************************************************************************/
-/* ** Low-Level Graphics Routines					*/
-/************************************************************************/
-
-static void lcd_drawchars (ushort x, ushort y, uchar *str, int count)
-{
-	uchar *dest;
-	ushort off, row;
-
-	dest = (uchar *)(lcd_base + y * lcd_line_length + x * (1 << LCD_BPP) / 8);
-	off  = x * (1 << LCD_BPP) % 8;
-
-	for (row=0;  row < VIDEO_FONT_HEIGHT;  ++row, dest += lcd_line_length)  {
-		uchar *s = str;
-		uchar *d = dest;
-		int i;
-
-#if LCD_BPP == LCD_MONOCHROME
-		uchar rest = *d & -(1 << (8-off));
-		uchar sym;
-#endif
-		for (i=0; i<count; ++i) {
-			uchar c, bits;
-
-			c = *s++;
-			bits = video_fontdata[c * VIDEO_FONT_HEIGHT + row];
-
-#if LCD_BPP == LCD_MONOCHROME
-			sym  = (COLOR_MASK(lcd_color_fg) & bits) |
-			       (COLOR_MASK(lcd_color_bg) & ~bits);
-
-			*d++ = rest | (sym >> off);
-			rest = sym << (8-off);
-#elif LCD_BPP == LCD_COLOR8
-			for (c=0; c<8; ++c) {
-				*d++ = (bits & 0x80) ?
-						lcd_color_fg : lcd_color_bg;
-				bits <<= 1;
-			}
-#endif
-		}
-
-#if LCD_BPP == LCD_MONOCHROME
-		*d  = rest | (*d & ((1 << (8-off)) - 1));
-#endif
-	}
-}
-
-/*----------------------------------------------------------------------*/
-
-static inline void lcd_puts_xy (ushort x, ushort y, uchar *s)
-{
-#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
-	lcd_drawchars (x, y+BMP_LOGO_HEIGHT, s, strlen (s));
-#else
-	lcd_drawchars (x, y, s, strlen (s));
-#endif
-}
-
-/*----------------------------------------------------------------------*/
-
-static inline void lcd_putc_xy (ushort x, ushort y, uchar c)
-{
-#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
-	lcd_drawchars (x, y+BMP_LOGO_HEIGHT, &c, 1);
-#else
-	lcd_drawchars (x, y, &c, 1);
-#endif
-}
-
 /************************************************************************/
-/**  Small utility to check that you got the colours right		*/
-/************************************************************************/
-#ifdef LCD_TEST_PATTERN
-
-#define	N_BLK_VERT	2
-#define	N_BLK_HOR	3
-
-static int test_colors[N_BLK_HOR*N_BLK_VERT] = {
-	CONSOLE_COLOR_RED,	CONSOLE_COLOR_GREEN,	CONSOLE_COLOR_YELLOW,
-	CONSOLE_COLOR_BLUE,	CONSOLE_COLOR_MAGENTA,	CONSOLE_COLOR_CYAN,
-};
-
-static void test_pattern (void)
-{
-	ushort v_max  = panel_info.vl_row;
-	ushort h_max  = panel_info.vl_col;
-	ushort v_step = (v_max + N_BLK_VERT - 1) / N_BLK_VERT;
-	ushort h_step = (h_max + N_BLK_HOR  - 1) / N_BLK_HOR;
-	ushort v, h;
-	uchar *pix = (uchar *)lcd_base;
-
-	printf ("[LCD] Test Pattern: %d x %d [%d x %d]\n",
-		h_max, v_max, h_step, v_step);
-
-	/* WARNING: Code silently assumes 8bit/pixel */
-	for (v=0; v<v_max; ++v) {
-		uchar iy = v / v_step;
-		for (h=0; h<h_max; ++h) {
-			uchar ix = N_BLK_HOR * iy + (h/h_step);
-			*pix++ = test_colors[ix];
-		}
-	}
-}
-#endif /* LCD_TEST_PATTERN */
-
-
-/************************************************************************/
-/* ** GENERIC Initialization Routines					*/
-/************************************************************************/
-
-int drv_lcd_init (void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-
-	device_t lcddev;
-	int rc;
-
-	lcd_base = (void *)(gd->fb_base);
-
-	lcd_line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
-
-	lcd_init (lcd_base);		/* LCD initialization */
-
-	/* Device initialization */
-	memset (&lcddev, 0, sizeof (lcddev));
-
-	strcpy (lcddev.name, "lcd");
-	lcddev.ext   = 0;			/* No extensions */
-	lcddev.flags = DEV_FLAGS_OUTPUT;	/* Output only */
-	lcddev.putc  = lcd_putc;		/* 'putc' function */
-	lcddev.puts  = lcd_puts;		/* 'puts' function */
-
-	rc = device_register (&lcddev);
-
-	return (rc == 0) ? 1 : rc;
-}
-
-/*----------------------------------------------------------------------*/
-
-static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-#if LCD_BPP == LCD_MONOCHROME
-	/* Setting the palette */
-	lcd_initcolregs();
-
-#elif LCD_BPP == LCD_COLOR8
-	/* Setting the palette */
-	lcd_setcolreg  (CONSOLE_COLOR_BLACK,       0,    0,    0);
-	lcd_setcolreg  (CONSOLE_COLOR_RED,	0xFF,    0,    0);
-	lcd_setcolreg  (CONSOLE_COLOR_GREEN,       0, 0xFF,    0);
-	lcd_setcolreg  (CONSOLE_COLOR_YELLOW,	0xFF, 0xFF,    0);
-	lcd_setcolreg  (CONSOLE_COLOR_BLUE,        0,    0, 0xFF);
-	lcd_setcolreg  (CONSOLE_COLOR_MAGENTA,	0xFF,    0, 0xFF);
-	lcd_setcolreg  (CONSOLE_COLOR_CYAN,	   0, 0xFF, 0xFF);
-	lcd_setcolreg  (CONSOLE_COLOR_GREY,	0xAA, 0xAA, 0xAA);
-	lcd_setcolreg  (CONSOLE_COLOR_WHITE,	0xFF, 0xFF, 0xFF);
-#endif
-
-#ifndef CFG_WHITE_ON_BLACK
-	lcd_setfgcolor (CONSOLE_COLOR_BLACK);
-	lcd_setbgcolor (CONSOLE_COLOR_WHITE);
-#else
-	lcd_setfgcolor (CONSOLE_COLOR_WHITE);
-	lcd_setbgcolor (CONSOLE_COLOR_BLACK);
-#endif	/* CFG_WHITE_ON_BLACK */
-
-#ifdef	LCD_TEST_PATTERN
-	test_pattern();
-#else
-	/* set framebuffer to background color */
-	memset ((char *)lcd_base,
-		COLOR_MASK(lcd_getbgcolor()),
-		lcd_line_length*panel_info.vl_row);
-#endif
-	/* Paint the logo and retrieve LCD base address */
-	debug ("[LCD] Drawing the logo...\n");
-	lcd_console_address = lcd_logo ();
-
-	console_col = 0;
-	console_row = 0;
-
-	return (0);
-}
-
-U_BOOT_CMD(
-	cls,	1,	1,	lcd_clear,
-	"cls     - clear screen\n",
-	NULL
-);
-
-/*----------------------------------------------------------------------*/
-
-static int lcd_init (void *lcdbase)
-{
-	/* Initialize the lcd controller */
-	debug ("[LCD] Initializing LCD frambuffer at %p\n", lcdbase);
-
-	lcd_ctrl_init (lcdbase);
-	lcd_clear (NULL, 1, 1, NULL);	/* dummy args */
-	lcd_enable ();
-
-	/* Initialize the console */
-	console_col = 0;
-#ifdef LCD_INFO_BELOW_LOGO
-	console_row = 7 + BMP_LOGO_HEIGHT / VIDEO_FONT_HEIGHT;
-#else
-	console_row = 1;	/* leave 1 blank line below logo */
-#endif
-	lcd_is_enabled = 1;
-
-	return 0;
-}
-
 
 /************************************************************************/
-/* ** ROM capable initialization part - needed to reserve FB memory	*/
+/* ----------------- chipset specific functions ----------------------- */
 /************************************************************************/
 
 /*
- * This is called early in the system initialization to grab memory
- * for the LCD controller.
- * Returns new address for monitor, after reserving LCD buffer memory
- *
- * Note that this is running from ROM, so no write access to global data.
+ * Calculate fb size for VIDEOLFB_ATAG.
  */
-ulong lcd_setmem (ulong addr)
+ulong calc_fbsize (void)
 {
 	ulong size;
 	int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
 
-	debug ("LCD panel info: %d x %d, %d bit/pix\n",
-		panel_info.vl_col, panel_info.vl_row, NBITS (panel_info.vl_bpix) );
-
 	size = line_length * panel_info.vl_row;
 
-	/* Round up to nearest full page */
-	size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
-
-	/* Allocate pages for the frame buffer. */
-	addr -= size;
-
-	debug ("Reserving %ldk for LCD Framebuffer at: %08lx\n", size>>10, addr);
-
-	return (addr);
+	return size;
 }
 
-
-/************************************************************************/
-/* ----------------- chipset specific functions ----------------------- */
-/************************************************************************/
-
-static void lcd_ctrl_init (void *lcdbase)
+void lcd_ctrl_init (void *lcdbase)
 {
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 	volatile lcd823_t *lcdp = &immr->im_lcd;
@@ -983,7 +455,7 @@ lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue)
 /*----------------------------------------------------------------------*/
 
 #if LCD_BPP == LCD_COLOR8
-static void
+void
 lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
 {
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
@@ -1026,37 +498,7 @@ void lcd_initcolregs (void)
 
 /*----------------------------------------------------------------------*/
 
-static void lcd_setfgcolor (int color)
-{
-	lcd_color_fg = color & 0x0F;
-}
-
-/*----------------------------------------------------------------------*/
-
-static void lcd_setbgcolor (int color)
-{
-	lcd_color_bg = color & 0x0F;
-}
-
-/*----------------------------------------------------------------------*/
-
-#ifdef	NOT_USED_SO_FAR
-static int lcd_getfgcolor (void)
-{
-	return lcd_color_fg;
-}
-#endif	/* NOT_USED_SO_FAR */
-
-/*----------------------------------------------------------------------*/
-
-static int lcd_getbgcolor (void)
-{
-	return lcd_color_bg;
-}
-
-/*----------------------------------------------------------------------*/
-
-static void lcd_enable (void)
+void lcd_enable (void)
 {
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 	volatile lcd823_t *lcdp = &immr->im_lcd;
@@ -1174,223 +616,5 @@ void lcd_disable (void)
 
 
 /************************************************************************/
-/* ** Chipset depending Bitmap / Logo stuff...				*/
-/************************************************************************/
-
-
-#ifdef CONFIG_LCD_LOGO
-static void bitmap_plot (int x, int y)
-{
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-	volatile cpm8xx_t *cp = &(immr->im_cpm);
-	ushort *cmap;
-	ushort i;
-	uchar *bmap;
-	uchar *fb;
-
-	debug ("Logo: width %d  height %d  colors %d  cmap %d\n",
-		BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS,
-		sizeof(bmp_logo_palette)/(sizeof(ushort))
-	);
-
-	/* Leave room for default color map */
-	cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]);
-
-	WATCHDOG_RESET();
-
-	/* Set color map */
-	for (i=0; i<(sizeof(bmp_logo_palette)/(sizeof(ushort))); ++i) {
-		ushort colreg = bmp_logo_palette[i];
-#ifdef	CFG_INVERT_COLORS
-		colreg ^= 0xFFF;
-#endif
-		*cmap++ = colreg;
-	}
-
-	bmap = &bmp_logo_bitmap[0];
-	fb   = (char *)(lcd_base + y * lcd_line_length + x);
-
-	WATCHDOG_RESET();
-
-	for (i=0; i<BMP_LOGO_HEIGHT; ++i) {
-		memcpy (fb, bmap, BMP_LOGO_WIDTH);
-		bmap += BMP_LOGO_WIDTH;
-		fb   += panel_info.vl_col;
-	}
-
-	WATCHDOG_RESET();
-}
-#endif /* CONFIG_LCD_LOGO */
-
-#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
-/*
- * Display the BMP file located at address bmp_image.
- * Only uncompressed
- */
-int lcd_display_bitmap(ulong bmp_image, int x, int y)
-{
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-	volatile cpm8xx_t *cp = &(immr->im_cpm);
-	ushort *cmap;
-	ushort i, j;
-	uchar *fb;
-	bmp_image_t *bmp=(bmp_image_t *)bmp_image;
-	uchar *bmap;
-	ushort padded_line;
-	unsigned long width, height;
-	unsigned colors,bpix;
-	unsigned long compression;
-
-	WATCHDOG_RESET();
-
-	if (!((bmp->header.signature[0]=='B') &&
-	      (bmp->header.signature[1]=='M'))) {
-		printf ("Error: no valid bmp image at %lx\n", bmp_image);
-		return 1;
-	}
-
-	width = le32_to_cpu (bmp->header.width);
-	height = le32_to_cpu (bmp->header.height);
-	colors = 1<<le16_to_cpu (bmp->header.bit_count);
-	compression = le32_to_cpu (bmp->header.compression);
-
-	bpix = NBITS(panel_info.vl_bpix);
-
-	if ((bpix != 1) && (bpix != 8)) {
-		printf ("Error: %d bit/pixel mode not supported by U-Boot\n",
-			bpix);
-		return 1;
-	}
-
-	if (bpix != le16_to_cpu(bmp->header.bit_count)) {
-		printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n",
-			bpix,
-			le16_to_cpu(bmp->header.bit_count));
-		return 1;
-	}
-
-	if (compression!=BMP_BI_RGB) {
-		printf ("Error: compression type %ld not supported\n",
-			compression);
-		return 1;
-	}
-
-	debug ("Display-bmp: %d x %d  with %d colors\n",
-	       width, height, colors);
-
-	if (bpix==8) {
-		/* Fill the entire color map */
-		cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
-
-		/* Set color map */
-		for (i = 0; i < colors; ++i) {
-			bmp_color_table_entry_t cte = bmp->color_table[i];
-			ushort colreg =
-				((cte.red>>4)   << 8) |
-				((cte.green>>4) << 4) |
-				(cte.blue>>4) ;
-#ifdef	CFG_INVERT_COLORS
-			colreg ^= 0xFFF;
-#endif
-			*cmap-- = colreg;
-		}
-
-		WATCHDOG_RESET();
-	}
-
-	padded_line = (width&0x3) ? ((width&~0x3)+4) : (width);
-	if ((x + width)>panel_info.vl_col)
-		width = panel_info.vl_col - x;
-	if ((y + height)>panel_info.vl_row)
-		height = panel_info.vl_row - y;
-
-	bmap = (uchar *)bmp + le32_to_cpu (bmp->header.data_offset);
-	fb   = (uchar *) (lcd_base +
-		 (y + height - 1) * lcd_line_length + x);
-	for (i = 0; i < height; ++i) {
-		WATCHDOG_RESET();
-		for (j = 0; j < width ; j++)
-			*(fb++)=255-*(bmap++);
-		bmap += (width - padded_line);
-		fb   -= (width + lcd_line_length);
-	}
-
-	return (0);
-}
-#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
-
-/*----------------------------------------------------------------------*/
-
-static void *lcd_logo (void)
-{
-#ifdef LCD_INFO
-	DECLARE_GLOBAL_DATA_PTR;
-
-	char info[80];
-	char temp[32];
-#endif /* LCD_INFO */
-
-#ifdef CONFIG_SPLASH_SCREEN
-	char *s;
-	ulong addr;
-	static int do_splash = 1;
-
-	if (do_splash && (s = getenv("splashimage")) != NULL) {
-		addr = simple_strtoul(s, NULL, 16);
-		do_splash = 0;
-
-		if (lcd_display_bitmap (addr, 0, 0) == 0) {
-			return ((void *)lcd_base);
-		}
-	}
-#endif	/* CONFIG_SPLASH_SCREEN */
-
-#ifdef CONFIG_LCD_LOGO
-	bitmap_plot (0, 0);
-#endif /* CONFIG_LCD_LOGO */
-
-
-#ifdef LCD_INFO
-	sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__);
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, info, strlen(info));
-
-	sprintf (info, "(C) 2004 DENX Software Engineering");
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
-					info, strlen(info));
-
-	sprintf (info, "    Wolfgang DENK, wd@denx.de");
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
-					info, strlen(info));
-#ifdef LCD_INFO_BELOW_LOGO
-	sprintf (info, "MPC823 CPU at %s MHz",
-		strmhz(temp, gd->cpu_clk));
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
-					info, strlen(info));
-	sprintf (info, "  %ld MB RAM, %ld MB Flash",
-		gd->ram_size >> 20,
-		gd->bd->bi_flashsize >> 20 );
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
-					info, strlen(info));
-#else
-	/* leave one blank line */
-
-	sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
-		strmhz(temp, gd->cpu_clk),
-		gd->ram_size >> 20,
-		gd->bd->bi_flashsize >> 20 );
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
-					info, strlen(info));
-#endif /* LCD_INFO_BELOW_LOGO */
-#endif /* LCD_INFO */
-
-#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
-	return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length));
-#else
-	return ((void *)lcd_base);
-#endif	/* CONFIG_LCD_LOGO */
-}
-
-/************************************************************************/
-/************************************************************************/
 
 #endif /* CONFIG_LCD */
diff --git a/cpu/pxa/pxafb.c b/cpu/pxa/pxafb.c
index ef60d4a84..b2caa73c6 100644
--- a/cpu/pxa/pxafb.c
+++ b/cpu/pxa/pxafb.c
@@ -1,4 +1,6 @@
 /*
+ * PXA LCD Controller
+ *
  * (C) Copyright 2001-2002
  * Wolfgang Denk, DENX Software Engineering -- wd@denx.de
  *
@@ -25,701 +27,163 @@
 /* ** HEADER FILES							*/
 /************************************************************************/
 
-#define DEBUG 1
 #include <config.h>
 #include <common.h>
 #include <version.h>
 #include <stdarg.h>
-#include <lcdvideo.h>
 #include <linux/types.h>
 #include <devices.h>
+#include <lcd.h>
 #include <asm/arch/pxa-regs.h>
 
-#ifdef CONFIG_LCD
-
-/************************************************************************/
-/* ** CONFIG STUFF -- should be moved to board config file		*/
-/************************************************************************/
-#ifndef CONFIG_EDT32F10
-#define CONFIG_LCD_LOGO
-#define LCD_INFO		/* Display Logo, (C) and system info	*/
-#endif
-
-#ifdef CONFIG_V37
-#undef CONFIG_LCD_LOGO
-#undef LCD_INFO
-#endif
-
-#undef CONFIG_LCD_LOGO
+/* #define DEBUG */
 
-#define LCD_TEST_PATTERN
-/* #define LCD_TEST_PATTERN */	/* color backgnd for frame/color adjust */
-/* #define CFG_INVERT_COLORS */	/* Not needed - adjust vl_dp instead 	*/
-/************************************************************************/
-
-/************************************************************************/
-/* ** FONT AND LOGO DATA						*/
-/************************************************************************/
-
-#include <video_font.h>		/* Get font data, width and height	*/
-
-#ifdef CONFIG_LCD_LOGO
-# include <bmp_nexus.h>		/* Get logo data, width and height	*/
-#endif
-
-/************************************************************************/
-/************************************************************************/
-
-/*
- *  Information about displays we are using.  This is for configuring
- *  the LCD controller and memory allocation.  Someone has to know what
- *  is connected, as we can't autodetect anything.
- */
-#define CFG_HIGH	0	/* Pins are active high */
-#define CFG_LOW		1	/* Pins are active low */
-
-/* PXA LCD DMA descriptor */
-struct pxafb_dma_descriptor {
-	u_long fdadr;
-	u_long fsadr;
-	u_long fidr;
-	u_long ldcmd;
-};
-
-/* PXA LCD info */
-struct pxafb_info {
-
-	/* Misc registers */
-	u_long reg_lccr3;
-	u_long reg_lccr2;
-	u_long reg_lccr1;
-	u_long reg_lccr0;
-	u_long fdadr0;
-	u_long fdadr1;
-
-	/* DMA descriptors */
-	struct pxafb_dma_descriptor * 	dmadesc_fblow;
-	struct pxafb_dma_descriptor * 	dmadesc_fbhigh;
-	struct pxafb_dma_descriptor *	dmadesc_palette;
-
-	u_long		screen;		/* physical address of frame buffer */
-	u_long		palette;	/* physical address of palette memory */
-	u_int		palette_size;
-};
-
-typedef struct vidinfo {
-    ushort	vl_col;		/* Number of columns (i.e. 640) */
-    ushort	vl_row;		/* Number of rows (i.e. 480) */
-    ushort	vl_width;	/* Width of display area in millimeters */
-    ushort	vl_height;	/* Height of display area in millimeters */
-
-    /* LCD configuration register.
-    */
-    u_char	vl_clkp;	/* Clock polarity */
-    u_char	vl_oep;		/* Output Enable polarity */
-    u_char	vl_hsp;		/* Horizontal Sync polarity */
-    u_char	vl_vsp;		/* Vertical Sync polarity */
-    u_char	vl_dp;		/* Data polarity */
-    u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
-    u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
-    u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
-    u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
-    u_char	vl_tft;		/* 0 = passive, 1 = TFT */
-
-    /* Horizontal control register.  Timing from data sheet.
-    */
-    ushort	vl_hpw;		/* Horz sync pulse width */
-    u_char	vl_blw;		/* Wait before of line */
-    u_char	vl_elw;		/* Wait end of line */
-
-    /* Vertical control register.
-    */
-    u_char	vl_vpw;		/* Vertical sync pulse width */
-    u_char	vl_bfw;		/* Wait before of frame */
-    u_char	vl_efw;		/* Wait end of frame */
-
-    u_char	vl_lcdac;	/* LCD AC timing */
-
-    /* PXA LCD controller params
-     */
-    struct pxafb_info pxa;
-
-} vidinfo_t;
-
-#define LCD_MONOCHROME	0
-#define LCD_COLOR2	1
-#define LCD_COLOR4	2
-#define LCD_COLOR8	3
-#define LCD_COLOR16	4
+#ifdef CONFIG_LCD
 
 /*----------------------------------------------------------------------*/
-#define CONFIG_PXA_VGA
-#ifdef CONFIG_PXA_VGA
 /*
- *  LCD outputs connected to a video DAC
+ * Define panel bpp, LCCR0, LCCR3 and panel_info video struct for
+ * your display.
  */
 
-#define LCD_BPP	LCD_COLOR8
+#ifdef CONFIG_PXA_VGA
+/* LCD outputs connected to a video DAC  */
+# define LCD_BPP	LCD_COLOR8
 
 /* you have to set lccr0 and lccr3 (including pcd) */
-#define REG_LCCR0	0x003008f8
-#define REG_LCCR3	0x0300FF01
+# define REG_LCCR0	0x003008f8
+# define REG_LCCR3	0x0300FF01
 
 /* 640x480x16 @ 61 Hz */
-static vidinfo_t panel_info = {
-	vl_col: 	640,
-	vl_row: 	480,
-	vl_width: 	640,
-	vl_height: 	480,
-	vl_clkp: 	CFG_HIGH,
-	vl_oep: 	CFG_HIGH,
-	vl_hsp: 	CFG_HIGH,
-	vl_vsp: 	CFG_HIGH,
-	vl_dp: 		CFG_HIGH,
-	vl_bpix: 	LCD_BPP,
-	vl_lbw: 	0,
-	vl_splt: 	0,
-	vl_clor: 	0,
-	vl_lcdac: 	0,
-	vl_tft: 	1,
-	vl_hpw: 	40,
-	vl_blw: 	56,
-	vl_elw: 	56,
-	vl_vpw: 	20,
-	vl_bfw: 	8,
-	vl_efw: 	8,
+vidinfo_t panel_info = {
+	vl_col:		640,
+	vl_row:		480,
+	vl_width:	640,
+	vl_height:	480,
+	vl_clkp:	CFG_HIGH,
+	vl_oep:		CFG_HIGH,
+	vl_hsp:		CFG_HIGH,
+	vl_vsp:		CFG_HIGH,
+	vl_dp:		CFG_HIGH,
+	vl_bpix:	LCD_BPP,
+	vl_lbw:		0,
+	vl_splt:	0,
+	vl_clor:	0,
+	vl_tft:		1,
+	vl_hpw:		40,
+	vl_blw:		56,
+	vl_elw:		56,
+	vl_vpw:		20,
+	vl_bfw:		8,
+	vl_efw:		8,
 };
 #endif /* CONFIG_PXA_VIDEO */
 
+/*----------------------------------------------------------------------*/
 #ifdef CONFIG_SHARP_LM8V31
 
-#define LCD_BPP	LCD_COLOR8
-#define LCD_INVERT_COLORS	/* Needed for colors to be correct, but why? */
+# define LCD_BPP	LCD_COLOR8
+# define LCD_INVERT_COLORS	/* Needed for colors to be correct, but why?	*/
 
 /* you have to set lccr0 and lccr3 (including pcd) */
-#define REG_LCCR0	0x0030087C
-#define REG_LCCR3	0x0340FF08
-
-static vidinfo_t panel_info = {
-	vl_col: 	640,
-	vl_row: 	480,
-	vl_width: 	157,
-	vl_height: 	118,
-	vl_clkp: 	CFG_HIGH,
-	vl_oep: 	CFG_HIGH,
-	vl_hsp: 	CFG_HIGH,
-	vl_vsp: 	CFG_HIGH,
-	vl_dp: 		CFG_HIGH,
-	vl_bpix: 	LCD_BPP,
-	vl_lbw: 	0,
-	vl_splt: 	1,
-	vl_clor: 	1,
-	vl_lcdac: 	0,
-	vl_tft: 	0,
-	vl_hpw: 	1,
-	vl_blw: 	3,
-	vl_elw: 	3,
-	vl_vpw: 	1,
-	vl_bfw: 	0,
-	vl_efw: 	0,
+# define REG_LCCR0	0x0030087C
+# define REG_LCCR3	0x0340FF08
+
+vidinfo_t panel_info = {
+	vl_col:		640,
+	vl_row:		480,
+	vl_width:	157,
+	vl_height:	118,
+	vl_clkp:	CFG_HIGH,
+	vl_oep:		CFG_HIGH,
+	vl_hsp:		CFG_HIGH,
+	vl_vsp:		CFG_HIGH,
+	vl_dp:		CFG_HIGH,
+	vl_bpix:	LCD_BPP,
+	vl_lbw:		0,
+	vl_splt:	1,
+	vl_clor:	1,
+	vl_tft:		0,
+	vl_hpw:		1,
+	vl_blw:		3,
+	vl_elw:		3,
+	vl_vpw:		1,
+	vl_bfw:		0,
+	vl_efw:		0,
 };
 #endif /* CONFIG_SHARP_LM8V31 */
 
 /*----------------------------------------------------------------------*/
+#ifdef CONFIG_HITACHI_SX14
+/* Hitachi SX14Q004-ZZA color STN LCD */
+#define LCD_BPP		LCD_COLOR8
 
-/*----------------------------------------------------------------------*/
-
-#if defined(LCD_INFO_BELOW_LOGO)
-# define LCD_INFO_X		0
-# define LCD_INFO_Y		(BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
-#elif defined(CONFIG_LCD_LOGO)
-# define LCD_INFO_X		(BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
-# define LCD_INFO_Y		(VIDEO_FONT_HEIGHT)
-#else
-# define LCD_INFO_X		(VIDEO_FONT_WIDTH)
-# define LCD_INFO_Y		(VIDEO_FONT_HEIGHT)
-#endif
-
-#ifndef LCD_BPP
-#define LCD_BPP			LCD_COLOR8
-#endif
-#ifndef LCD_DF
-#define LCD_DF			1
-#endif
-
-#define NBITS(bit_code)		(1 << (bit_code))
-#define NCOLORS(bit_code)	(1 << NBITS(bit_code))
-
-static int lcd_line_length;
-
-static int lcd_color_fg;
-static int lcd_color_bg;
-
-static char lcd_is_enabled = 0;		/* Indicate that LCD is enabled	*/
-
-/*
- * Frame buffer memory information
- */
-static void *lcd_base;			/* Start of framebuffer memory	*/
-static void *lcd_console_address;	/* Start of console buffer	*/
-
-
-/************************************************************************/
-/* ** CONSOLE CONSTANTS							*/
-/************************************************************************/
-
-#if LCD_BPP == LCD_MONOCHROME
-
-/*
- * Simple color definitions
- */
-#define CONSOLE_COLOR_BLACK	 0
-#define CONSOLE_COLOR_WHITE	 1	/* Must remain last / highest */
-
-#elif 	LCD_BPP == LCD_COLOR8
-
-/*
- * Simple color definitions
- */
-#define CONSOLE_COLOR_BLACK	 0
-#define CONSOLE_COLOR_RED	 1
-#define CONSOLE_COLOR_GREEN	 2
-#define CONSOLE_COLOR_YELLOW	 3
-#define CONSOLE_COLOR_BLUE	 4
-#define CONSOLE_COLOR_MAGENTA	 5
-#define CONSOLE_COLOR_CYAN	 6
-#define CONSOLE_COLOR_GREY	14
-#define CONSOLE_COLOR_WHITE	15	/* Must remain last / highest */
-
-#else /* 16 bit */
-
-#define CONSOLE_COLOR_BLACK	 0x0000
-#define CONSOLE_COLOR_WHITE	 0xffff	/* Must remain last / highest */
-
-#endif
-
-#if defined(CONFIG_LCD_LOGO) && (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET)
-#error Default Color Map overlaps with Logo Color Map
-#endif
-
-/************************************************************************/
-
-#ifndef PAGE_SIZE
-#define	PAGE_SIZE	4096
-#endif
-
-
-/************************************************************************/
-/* ** CONSOLE DEFINITIONS & FUNCTIONS					*/
-/************************************************************************/
-
-#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
-#define CONSOLE_ROWS		((panel_info.vl_row-BMP_LOGO_HEIGHT) \
-					/ VIDEO_FONT_HEIGHT)
-#else
-#define CONSOLE_ROWS		(panel_info.vl_row / VIDEO_FONT_HEIGHT)
-#endif
-#define CONSOLE_COLS		(panel_info.vl_col / VIDEO_FONT_WIDTH)
-#define CONSOLE_ROW_SIZE	(VIDEO_FONT_HEIGHT * lcd_line_length)
-#define CONSOLE_ROW_FIRST	(lcd_console_address)
-#define CONSOLE_ROW_SECOND	(lcd_console_address + CONSOLE_ROW_SIZE)
-#define CONSOLE_ROW_LAST	(lcd_console_address + CONSOLE_SIZE \
-					- CONSOLE_ROW_SIZE)
-#define CONSOLE_SIZE		(CONSOLE_ROW_SIZE * CONSOLE_ROWS)
-#define CONSOLE_SCROLL_SIZE	(CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-
-#if  LCD_BPP == LCD_MONOCHROME
-#define COLOR_MASK(c)		((c)      | (c) << 1 | (c) << 2 | (c) << 3 | \
-				 (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
-#elif LCD_BPP == LCD_COLOR8
-#define COLOR_MASK(c)		(c)
-#elif LCD_BPP == LCD_COLOR16
-#define COLOR_MASK(c)		(c)
-#else
-#error Unsupported LCD BPP.
-#endif
-
-static short console_col;
-static short console_row;
-
-/************************************************************************/
-
-ulong	lcd_setmem (ulong addr);
-
-static void	lcd_drawchars  (ushort x, ushort y, uchar *str, int count);
-static inline void lcd_puts_xy (ushort x, ushort y, uchar *s);
-static inline void lcd_putc_xy (ushort x, ushort y, uchar  c);
-
-static int	lcd_init (void *lcdbase);
-static void	lcd_ctrl_init (void *lcdbase);
-static void	lcd_enable (void);
-static void    *lcd_logo (void);
-#if LCD_BPP == LCD_COLOR8
-static void	lcd_setcolreg (ushort regno,
-				ushort red, ushort green, ushort blue);
-#endif
-#if LCD_BPP == LCD_MONOCHROME
-static void	lcd_initcolregs (void);
-#endif
-static void	lcd_setfgcolor (int color);
-static void	lcd_setbgcolor (int color);
-
-#ifdef	NOT_USED_SO_FAR
-static int	lcd_getbgcolor (void);
-static void	lcd_disable (void);
-static void	lcd_getcolreg (ushort regno,
-				ushort *red, ushort *green, ushort *blue);
-static int	lcd_getfgcolor (void);
-#endif	/* NOT_USED_SO_FAR */
-
-
-static int pxafb_init_mem(void *lcdbase, vidinfo_t *vid);
-static void pxafb_setup_gpio(vidinfo_t *vid);
-static void pxafb_enable_controller(vidinfo_t *vid);
-static int pxafb_init(vidinfo_t *vid);
-
-/************************************************************************/
-
-/*----------------------------------------------------------------------*/
-
-static void console_scrollup (void)
-{
-	/* Copy up rows ignoring the first one */
-	memcpy (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE);
-
-	/* Clear the last one */
-	memset (CONSOLE_ROW_LAST, COLOR_MASK(lcd_color_bg), CONSOLE_ROW_SIZE);
-}
-
-/*----------------------------------------------------------------------*/
-
-static inline void console_back (void)
-{
-	if (--console_col < 0) {
-		console_col = CONSOLE_COLS-1 ;
-		if (--console_row < 0) {
-			console_row = 0;
-		}
-	}
-
-	lcd_putc_xy (console_col * VIDEO_FONT_WIDTH,
-		     console_row * VIDEO_FONT_HEIGHT,
-		     ' ');
-}
-
-/*----------------------------------------------------------------------*/
-
-static inline void console_newline (void)
-{
-	++console_row;
-	console_col = 0;
-
-	/* Check if we need to scroll the terminal */
-	if (console_row >= CONSOLE_ROWS) {
-		/* Scroll everything up */
-		console_scrollup () ;
-		--console_row;
-	}
-}
-
-/*----------------------------------------------------------------------*/
-
-void lcd_putc (const char c)
-{
-	if (!lcd_is_enabled) {
-		serial_putc(c);
-		return;
-	}
-
-	switch (c) {
-	case '\r':	console_col = 0;
-			return;
-
-	case '\n':	console_newline();
-			return;
-
-	case '\t':	/* Tab (8 chars alignment) */
-			console_col |=  8;
-			console_col &= ~7;
-
-			if (console_col >= CONSOLE_COLS) {
-				console_newline();
-			}
-			return;
-
-	case '\b':	console_back();
-			return;
-
-	default:	lcd_putc_xy (console_col * VIDEO_FONT_WIDTH,
-				     console_row * VIDEO_FONT_HEIGHT,
-				     c);
-			if (++console_col >= CONSOLE_COLS) {
-				console_newline();
-			}
-			return;
-	}
-	/* NOTREACHED */
-}
-
-/*----------------------------------------------------------------------*/
-
-void lcd_puts (const char *s)
-{
-	if (!lcd_is_enabled) {
-		serial_puts (s);
-		return;
-	}
-
-	while (*s) {
-		lcd_putc (*s++);
-	}
-}
-
-/************************************************************************/
-/* ** Low-Level Graphics Routines					*/
-/************************************************************************/
-
-static void lcd_drawchars (ushort x, ushort y, uchar *str, int count)
-{
-	uchar *dest;
-	ushort off, row;
-
-	dest = (uchar *)(lcd_base + y * lcd_line_length + x * (1 << LCD_BPP) / 8);
-	off  = x * (1 << LCD_BPP) % 8;
-
-	for (row=0;  row < VIDEO_FONT_HEIGHT;  ++row, dest += lcd_line_length)  {
-		uchar *s = str;
-		uchar *d = dest;
-		int i;
-
-#if LCD_BPP == LCD_MONOCHROME
-		uchar rest = *d & -(1 << (8-off));
-		uchar sym;
-#endif
-		for (i=0; i<count; ++i) {
-			uchar c, bits;
-
-			c = *s++;
-			bits = video_fontdata[c * VIDEO_FONT_HEIGHT + row];
-
-#if LCD_BPP == LCD_MONOCHROME
-			sym  = (COLOR_MASK(lcd_color_fg) & bits) |
-			       (COLOR_MASK(lcd_color_bg) & ~bits);
-
-			*d++ = rest | (sym >> off);
-			rest = sym << (8-off);
-#elif LCD_BPP == LCD_COLOR8
-			for (c=0; c<8; ++c) {
-				*d++ = (bits & 0x80) ?
-						lcd_color_fg : lcd_color_bg;
-				bits <<= 1;
-			}
-#elif LCD_BPP == LCD_COLOR16
-			for (c=0; c<16; ++c) {
-				*d++ = (bits & 0x80) ?
-						lcd_color_fg : lcd_color_bg;
-				bits <<= 1;
-			}
-#endif
-		}
-
-#if LCD_BPP == LCD_MONOCHROME
-		*d  = rest | (*d & ((1 << (8-off)) - 1));
-#endif
-	}
-}
-
-/*----------------------------------------------------------------------*/
-
-static inline void lcd_puts_xy (ushort x, ushort y, uchar *s)
-{
-#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
-	lcd_drawchars (x, y+BMP_LOGO_HEIGHT, s, strlen (s));
-#else
-	lcd_drawchars (x, y, s, strlen (s));
-#endif
-}
-
-/*----------------------------------------------------------------------*/
-
-static inline void lcd_putc_xy (ushort x, ushort y, uchar c)
-{
-#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
-	lcd_drawchars (x, y+BMP_LOGO_HEIGHT, &c, 1);
-#else
-	lcd_drawchars (x, y, &c, 1);
-#endif
-}
-
-/************************************************************************/
-/**  Small utility to check that you got the colours right		*/
-/************************************************************************/
-#ifdef LCD_TEST_PATTERN
-
-#define	N_BLK_VERT	2
-#define	N_BLK_HOR	3
-
-static int test_colors[N_BLK_HOR*N_BLK_VERT] = {
-	CONSOLE_COLOR_RED,	CONSOLE_COLOR_GREEN,	CONSOLE_COLOR_YELLOW,
-	CONSOLE_COLOR_BLUE,	CONSOLE_COLOR_MAGENTA,	CONSOLE_COLOR_CYAN,
+/* you have to set lccr0 and lccr3 (including pcd) */
+#define REG_LCCR0	0x00301079
+#define REG_LCCR3	0x0340FF20
+
+vidinfo_t panel_info = {
+	vl_col:		320,
+	vl_row:		240,
+	vl_width:	167,
+	vl_height:	109,
+	vl_clkp:	CFG_HIGH,
+	vl_oep:		CFG_HIGH,
+	vl_hsp:		CFG_HIGH,
+	vl_vsp:		CFG_HIGH,
+	vl_dp:		CFG_HIGH,
+	vl_bpix:	LCD_BPP,
+	vl_lbw:		1,
+	vl_splt:	0,
+	vl_clor:	1,
+	vl_tft:		0,
+	vl_hpw:		1,
+	vl_blw:		1,
+	vl_elw:		1,
+	vl_vpw:		7,
+	vl_bfw:		0,
+	vl_efw:		0,
 };
-
-static void test_pattern (void)
-{
-	ushort v_max  = panel_info.vl_row;
-	ushort h_max  = panel_info.vl_col;
-	ushort v_step = (v_max + N_BLK_VERT - 1) / N_BLK_VERT;
-	ushort h_step = (h_max + N_BLK_HOR  - 1) / N_BLK_HOR;
-	ushort v, h;
-	uchar *pix = (uchar *)lcd_base;
-
-	printf ("[LCD] Test Pattern: %d x %d [%d x %d]\n",
-		h_max, v_max, h_step, v_step);
-
-	/* WARNING: Code silently assumes 8bit/pixel */
-	for (v=0; v<v_max; ++v) {
-		uchar iy = v / v_step;
-		for (h=0; h<h_max; ++h) {
-			uchar ix = N_BLK_HOR * iy + (h/h_step);
-			*pix++ = test_colors[ix];
-		}
-	}
-}
-#endif /* LCD_TEST_PATTERN */
-
-
-/************************************************************************/
-/* ** GENERIC Initialization Routines					*/
-/************************************************************************/
-
-int drv_lcd_init (void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-
-	device_t lcddev;
-	int rc;
-
-	lcd_base = (void *)(gd->fb_base);
-
-	lcd_line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
-
-	lcd_init (lcd_base);		/* LCD initialization */
-
-	/* Device initialization */
-	memset (&lcddev, 0, sizeof (lcddev));
-
-	strcpy (lcddev.name, "lcd");
-	lcddev.ext   = 0;			/* No extensions */
-	lcddev.flags = DEV_FLAGS_OUTPUT;	/* Output only */
-	lcddev.putc  = lcd_putc;		/* 'putc' function */
-	lcddev.puts  = lcd_puts;		/* 'puts' function */
-
-	rc = device_register (&lcddev);
-	return (rc == 0) ? 1 : rc;
-}
+#endif /* CONFIG_HITACHI_SX14 */
 
 /*----------------------------------------------------------------------*/
 
-static int lcd_init (void *lcdbase)
-{
-	/* Initialize the lcd controller */
-	debug ("[LCD] Initializing LCD frambuffer at %p\n", lcdbase);
-
-	lcd_ctrl_init (lcdbase);
-
-#if LCD_BPP == LCD_MONOCHROME
-	/* Setting the palette */
-	lcd_initcolregs();
-
-#elif LCD_BPP == LCD_COLOR8
-	/* Setting the palette */
-	lcd_setcolreg  (CONSOLE_COLOR_BLACK,       0,    0,    0);
-	lcd_setcolreg  (CONSOLE_COLOR_RED,	0xFF,    0,    0);
-	lcd_setcolreg  (CONSOLE_COLOR_GREEN,       0, 0xFF,    0);
-	lcd_setcolreg  (CONSOLE_COLOR_YELLOW,	0xFF, 0xFF,    0);
-	lcd_setcolreg  (CONSOLE_COLOR_BLUE,	0,    0, 0xFF);
-	lcd_setcolreg  (CONSOLE_COLOR_MAGENTA,	0xFF,    0, 0xFF);
-	lcd_setcolreg  (CONSOLE_COLOR_CYAN,	   0, 0xFF, 0xFF);
-	lcd_setcolreg  (CONSOLE_COLOR_GREY,	0xAA, 0xAA, 0xAA);
-	lcd_setcolreg  (CONSOLE_COLOR_WHITE,	0xFF, 0xFF, 0xFF);
+#if LCD_BPP == LCD_COLOR8
+void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue);
 #endif
-
-#define CFG_WHITE_ON_BLACK
-#ifndef CFG_WHITE_ON_BLACK
-	lcd_setfgcolor (CONSOLE_COLOR_BLACK);
-	lcd_setbgcolor (CONSOLE_COLOR_WHITE);
-#else
-	lcd_setfgcolor (CONSOLE_COLOR_WHITE);
-	lcd_setbgcolor (CONSOLE_COLOR_BLACK);
-#endif	/* CFG_WHITE_ON_BLACK */
-
-#ifdef	LCD_TEST_PATTERN
-	test_pattern();
-#else
-	/* set framebuffer to background color */
-	memset ((char *)lcd_base,
-		COLOR_MASK(lcd_getbgcolor()),
-		lcd_line_length*panel_info.vl_row);
+#if LCD_BPP == LCD_MONOCHROME
+void lcd_initcolregs (void);
 #endif
 
-	lcd_enable ();
+#ifdef NOT_USED_SO_FAR
+void lcd_disable (void);
+void lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue);
+#endif /* NOT_USED_SO_FAR */
 
-	/* Paint the logo and retrieve LCD base address */
-	debug ("[LCD] Drawing the logo...\n");
-	lcd_console_address = lcd_logo ();
+void lcd_ctrl_init	(void *lcdbase);
+void lcd_enable	(void);
 
-	/* Initialize the console */
-	console_col = 0;
-#ifdef LCD_INFO_BELOW_LOGO
-	console_row = 7 + BMP_LOGO_HEIGHT / VIDEO_FONT_HEIGHT;
-#else
-	console_row = 1;	/* leave 1 blank line below logo */
-#endif
-	lcd_is_enabled = 1;
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
 
-	return 0;
-}
+void *lcd_base;			/* Start of framebuffer memory	*/
+void *lcd_console_address;		/* Start of console buffer	*/
 
+short console_col;
+short console_row;
 
-/************************************************************************/
-/* ** ROM capable initialization part - needed to reserve FB memory	*/
+static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid);
+static void pxafb_setup_gpio (vidinfo_t *vid);
+static void pxafb_enable_controller (vidinfo_t *vid);
+static int pxafb_init (vidinfo_t *vid);
 /************************************************************************/
 
-/*
- * This is called early in the system initialization to grab memory
- * for the LCD controller.
- * Returns new address for monitor, after reserving LCD buffer memory
- *
- * Note that this is running from ROM, so no write access to global data.
- */
-ulong lcd_setmem (ulong addr)
-{
-	ulong size;
-	int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
-
-	debug ("LCD panel info: %d x %d, %d bit/pix\n",
-		panel_info.vl_col, panel_info.vl_row, NBITS (panel_info.vl_bpix) );
-
-	/* extra page for dma descriptors and palette */
-	size = line_length * panel_info.vl_row + PAGE_SIZE;
-
-	/* Round up to nearest full page */
-	size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
-
-	/* Allocate pages for the frame buffer. */
-	addr -= size;
-
-	debug ("Reserving %ldk for LCD Framebuffer at: %08lx\n", size>>10, addr);
-
-	return (addr);
-}
-
-
 /************************************************************************/
-/* ----------------- chipset specific functions ----------------------- */
+/* ---------------  PXA chipset specific functions  ------------------- */
 /************************************************************************/
 
-static void lcd_ctrl_init (void *lcdbase)
+void lcd_ctrl_init (void *lcdbase)
 {
 	pxafb_init_mem(lcdbase, &panel_info);
 	pxafb_init(&panel_info);
@@ -728,18 +192,16 @@ static void lcd_ctrl_init (void *lcdbase)
 }
 
 /*----------------------------------------------------------------------*/
-
-#ifdef	NOT_USED_SO_FAR
-static void
+#ifdef NOT_USED_SO_FAR
+void
 lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue)
 {
 }
-#endif	/* NOT_USED_SO_FAR */
+#endif /* NOT_USED_SO_FAR */
 
 /*----------------------------------------------------------------------*/
-
 #if LCD_BPP == LCD_COLOR8
-static void
+void
 lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
 {
 	struct pxafb_info *fbi = &panel_info.pxa;
@@ -754,7 +216,7 @@ lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
 #ifdef LCD_INVERT_COLORS
 		palette[regno] = ~val;
 #else
-		palette[regno] = ~val;
+		palette[regno] = val;
 #endif
 	}
 
@@ -763,137 +225,57 @@ lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
 		red, green, blue,
 		palette[regno]);
 }
-#endif	/* LCD_COLOR8 */
+#endif /* LCD_COLOR8 */
 
 /*----------------------------------------------------------------------*/
-
 #if LCD_BPP == LCD_MONOCHROME
-static
 void lcd_initcolregs (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-	volatile cpm8xx_t *cp = &(immr->im_cpm);
+	struct pxafb_info *fbi = &panel_info.pxa;
+	cmap = (ushort *)fbi->palette;
 	ushort regno;
 
 	for (regno = 0; regno < 16; regno++) {
-		cp->lcd_cmap[regno * 2] = 0;
-		cp->lcd_cmap[(regno * 2) + 1] = regno & 0x0f;
+		cmap[regno * 2] = 0;
+		cmap[(regno * 2) + 1] = regno & 0x0f;
 	}
 }
-#endif
-
-/*----------------------------------------------------------------------*/
-
-static void lcd_setfgcolor (int color)
-{
-	lcd_color_fg = color & 0x0F;
-}
-
-/*----------------------------------------------------------------------*/
-
-static void lcd_setbgcolor (int color)
-{
-	lcd_color_bg = color & 0x0F;
-}
-
-/*----------------------------------------------------------------------*/
-
-#ifdef	NOT_USED_SO_FAR
-static int lcd_getfgcolor (void)
-{
-	return lcd_color_fg;
-}
-#endif	/* NOT_USED_SO_FAR */
+#endif /* LCD_MONOCHROME */
 
 /*----------------------------------------------------------------------*/
-
-#ifdef	NOT_USED_SO_FAR
-static int lcd_getbgcolor (void)
+void lcd_enable (void)
 {
-	return lcd_color_bg;
 }
-#endif	/* NOT_USED_SO_FAR */
 
 /*----------------------------------------------------------------------*/
-
-static void lcd_enable (void)
-{
-}
-
-/*----------------------------------------------------------------------*/
-
 #ifdef	NOT_USED_SO_FAR
 static void lcd_disable (void)
 {
 }
-#endif	/* NOT_USED_SO_FAR */
+#endif /* NOT_USED_SO_FAR */
 
+/*----------------------------------------------------------------------*/
 
 /************************************************************************/
-/* ** Chipset depending Bitmap / Logo stuff...				*/
+/* ** PXA255 specific routines						*/
 /************************************************************************/
 
-#ifdef CONFIG_LCD_LOGO
-static void bitmap_plot (int x, int y)
-{
-	ushort *cmap;
-	ushort i;
-	uchar *bmap;
-	uchar *fb;
-	struct pxafb_info *fbi = &panel_info.pxa;
-
-	debug ("Logo: width %d  height %d  colors %d  cmap %d\n",
-		BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS,
-		sizeof(bmp_logo_palette)/(sizeof(ushort))
-	);
-
-	/* Leave room for default color map */
-	cmap = (ushort *)fbi->palette;
-
-	/* Set color map */
-	for (i=0; i<(sizeof(bmp_logo_palette)/(sizeof(ushort))); ++i) {
-		ushort colreg = bmp_logo_palette[i];
-#ifdef	CFG_INVERT_COLORS
-		colreg ^= 0xFFF;
-#endif
-		*cmap++ = colreg;
-	}
-
-	bmap = &bmp_logo_bitmap[0];
-	fb   = (char *)(lcd_base + y * lcd_line_length + x);
-
-	for (i=0; i<BMP_LOGO_HEIGHT; ++i) {
-		memcpy (fb, bmap, BMP_LOGO_WIDTH);
-		bmap += BMP_LOGO_WIDTH;
-		fb   += panel_info.vl_col;
-	}
-}
-#endif /* CONFIG_LCD_LOGO */
-
-/*----------------------------------------------------------------------*/
-
-static void *lcd_logo (void)
+/*
+ * Calculate fb size for VIDEOLFB_ATAG. Size returned contains fb,
+ * descriptors and palette areas.
+ */
+ulong calc_fbsize (void)
 {
-#ifdef CONFIG_LCD_LOGO
-	DECLARE_GLOBAL_DATA_PTR;
-	char info[80];
-	char temp[32];
+	ulong size;
+	int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
 
-	bitmap_plot (0, 0);
-#endif /* CONFIG_LCD_LOGO */
+	size = line_length * panel_info.vl_row;
+	size += PAGE_SIZE;
 
-#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
-	return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length));
-#else
-	return ((void *)lcd_base);
-#endif	/* CONFIG_LCD_LOGO */
+	return size;
 }
 
-/************************************************************************
-   PXA255 specific routines
-************************************************************************/
-
-static int pxafb_init_mem(void *lcdbase, vidinfo_t *vid)
+static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid)
 {
 	u_long palette_mem_size;
 	struct pxafb_info *fbi = &vid->pxa;
@@ -903,14 +285,15 @@ static int pxafb_init_mem(void *lcdbase, vidinfo_t *vid)
 
 	fbi->palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16;
 	palette_mem_size = fbi->palette_size * sizeof(u16);
+
 	debug("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
 	/* locate palette and descs at end of page following fb */
-	fbi->palette = (u_long)lcdbase + fb_size + 2*PAGE_SIZE - palette_mem_size;
+	fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size;
 
 	return 0;
 }
 
-static void pxafb_setup_gpio(vidinfo_t *vid)
+static void pxafb_setup_gpio (vidinfo_t *vid)
 {
 	u_long lccr0;
 
@@ -935,7 +318,7 @@ static void pxafb_setup_gpio(vidinfo_t *vid)
 
 	/* 8 bit interface */
 	else if (((lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_DPD))) ||
-	    (!(lccr0 & LCCR0_CMS) && !(lccr0 & LCCR0_PAS) && !(lccr0 & LCCR0_SDS)))
+		(!(lccr0 & LCCR0_CMS) && !(lccr0 & LCCR0_PAS) && !(lccr0 & LCCR0_SDS)))
 	{
 		debug("Setting GPIO for 8 bit data\n");
 		/* bits 58-65 */
@@ -967,7 +350,7 @@ static void pxafb_setup_gpio(vidinfo_t *vid)
 	}
 }
 
-static void pxafb_enable_controller(vidinfo_t *vid)
+static void pxafb_enable_controller (vidinfo_t *vid)
 {
 	debug("Enabling LCD controller\n");
 
@@ -990,7 +373,7 @@ static void pxafb_enable_controller(vidinfo_t *vid)
 	debug("LCCR3 = 0x%08x\n", (unsigned int)LCCR3);
 }
 
-static int pxafb_init(vidinfo_t *vid)
+static int pxafb_init (vidinfo_t *vid)
 {
 	struct pxafb_info *fbi = &vid->pxa;
 
@@ -1019,9 +402,8 @@ static int pxafb_init(vidinfo_t *vid)
 		LCCR2_EndFrmDel(vid->vl_efw);
 
 	fbi->reg_lccr3 = REG_LCCR3 & ~(LCCR3_HSP | LCCR3_VSP);
-	fbi->reg_lccr3 |=
-		  (vid->vl_hsp ? LCCR3_HorSnchL : LCCR3_HorSnchH)
-		| (vid->vl_vsp ? LCCR3_VrtSnchL : LCCR3_VrtSnchH);
+	fbi->reg_lccr3 |= (vid->vl_hsp ? LCCR3_HorSnchL : LCCR3_HorSnchH)
+			| (vid->vl_vsp ? LCCR3_VrtSnchL : LCCR3_VrtSnchH);
 
 
 	/* setup dma descriptors */
diff --git a/include/bmp_logo.h b/include/bmp_logo.h
index 265f744d0..9c924b859 100644
--- a/include/bmp_logo.h
+++ b/include/bmp_logo.h
@@ -18,7 +18,7 @@ unsigned short bmp_logo_palette[] = {
 	0x0343,  0x0454,  0x0565,  0x0565,  0x0676,  0x0787,  0x0898,  0x0999,
 	0x0AAA,  0x0ABA,  0x0BCB,  0x0CCC,  0x0DDD,  0x0EEE,  0x0FFF,  0x0FB3,
 	0x0FB4,  0x0FC4,  0x0FC5,  0x0FC6,  0x0FD7,  0x0FD8,  0x0FD9,  0x0FDA,
-	0x0FEA,  0x0FEB,  0x0FEC,  0x0FFD,  0x0FFE,  0x0FFF,  0x0FFF,  
+	0x0FEA,  0x0FEB,  0x0FEC,  0x0FFD,  0x0FFE,  0x0FFF,  0x0FFF,
 };
 
 unsigned char bmp_logo_bitmap[] = {
diff --git a/include/lcd.h b/include/lcd.h
index e0e21840a..06feab335 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -1,5 +1,5 @@
 /*
- * MPC823 LCD Controller
+ * MPC823 and PXA LCD Controller
  *
  * Modeled after video interface by Paolo Scaffardi
  *
@@ -17,7 +17,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -29,17 +29,266 @@
 #ifndef _LCD_H_
 #define _LCD_H_
 
-#if defined(CONFIG_RBC823)
-void	lcd_disable (void);
-#endif
-
 extern char lcd_is_enabled;
 
+extern int lcd_line_length;
+extern int lcd_color_fg;
+extern int lcd_color_bg;
+
+/*
+ * Frame buffer memory information
+ */
+extern void *lcd_base;		/* Start of framebuffer memory	*/
+extern void *lcd_console_address;	/* Start of console buffer	*/
+
+extern short console_col;
+extern short console_row;
+
+#if defined CONFIG_MPC823
+/*
+ * LCD controller stucture for MPC823 CPU
+ */
+typedef struct vidinfo {
+	ushort	vl_col;		/* Number of columns (i.e. 640) */
+	ushort	vl_row;		/* Number of rows (i.e. 480) */
+	ushort	vl_width;	/* Width of display area in millimeters */
+	ushort	vl_height;	/* Height of display area in millimeters */
+
+	/* LCD configuration register */
+	u_char	vl_clkp;	/* Clock polarity */
+	u_char	vl_oep;		/* Output Enable polarity */
+	u_char	vl_hsp;		/* Horizontal Sync polarity */
+	u_char	vl_vsp;		/* Vertical Sync polarity */
+	u_char	vl_dp;		/* Data polarity */
+	u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
+	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
+	u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
+	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
+	u_char	vl_tft;		/* 0 = passive, 1 = TFT */
+
+	/* Horizontal control register. Timing from data sheet */
+	ushort	vl_wbl;		/* Wait between lines */
+
+	/* Vertical control register */
+	u_char	vl_vpw;		/* Vertical sync pulse width */
+	u_char	vl_lcdac;	/* LCD AC timing */
+	u_char	vl_wbf;		/* Wait between frames */
+} vidinfo_t;
+
+extern vidinfo_t panel_info;
+
+#elif defined CONFIG_PXA250
+/*
+ * PXA LCD DMA descriptor
+ */
+struct pxafb_dma_descriptor {
+	u_long	fdadr;		/* Frame descriptor address register */
+	u_long	fsadr;		/* Frame source address register */
+	u_long	fidr;		/* Frame ID register */
+	u_long	ldcmd;		/* Command register */
+};
+
+/*
+ * PXA LCD info
+ */
+struct pxafb_info {
+
+	/* Misc registers */
+	u_long	reg_lccr3;
+	u_long	reg_lccr2;
+	u_long	reg_lccr1;
+	u_long	reg_lccr0;
+	u_long	fdadr0;
+	u_long	fdadr1;
+
+	/* DMA descriptors */
+	struct	pxafb_dma_descriptor *	dmadesc_fblow;
+	struct	pxafb_dma_descriptor *	dmadesc_fbhigh;
+	struct	pxafb_dma_descriptor *	dmadesc_palette;
+
+	u_long	screen;		/* physical address of frame buffer */
+	u_long	palette;	/* physical address of palette memory */
+	u_int	palette_size;
+};
+
+/*
+ * LCD controller stucture for PXA CPU
+ */
+typedef struct vidinfo {
+	ushort	vl_col;		/* Number of columns (i.e. 640) */
+	ushort	vl_row;		/* Number of rows (i.e. 480) */
+	ushort	vl_width;	/* Width of display area in millimeters */
+	ushort	vl_height;	/* Height of display area in millimeters */
+
+	/* LCD configuration register */
+	u_char	vl_clkp;	/* Clock polarity */
+	u_char	vl_oep;		/* Output Enable polarity */
+	u_char	vl_hsp;		/* Horizontal Sync polarity */
+	u_char	vl_vsp;		/* Vertical Sync polarity */
+	u_char	vl_dp;		/* Data polarity */
+	u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
+	u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
+	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
+	u_char	vl_tft;		/* 0 = passive, 1 = TFT */
+
+	/* Horizontal control register. Timing from data sheet */
+	ushort	vl_hpw;		/* Horz sync pulse width */
+	u_char	vl_blw;		/* Wait before of line */
+	u_char	vl_elw;		/* Wait end of line */
+
+	/* Vertical control register. */
+	u_char	vl_vpw;		/* Vertical sync pulse width */
+	u_char	vl_bfw;		/* Wait before of frame */
+	u_char	vl_efw;		/* Wait end of frame */
+
+	/* PXA LCD controller params */
+	struct	pxafb_info pxa;
+} vidinfo_t;
+
+extern vidinfo_t panel_info;
+
+#endif /* CONFIG_MPC823 or CONFIG_PXA250 */
+
 /* Video functions */
 
+#if defined(CONFIG_RBC823)
+void	lcd_disable	(void);
+#endif
+
+
 /* int	lcd_init	(void *lcdbase); */
 void	lcd_putc	(const char c);
 void	lcd_puts	(const char *s);
 void	lcd_printf	(const char *fmt, ...);
 
+
+/************************************************************************/
+/* ** BITMAP DISPLAY SUPPORT						*/
+/************************************************************************/
+#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
+# include <bmp_layout.h>
+# include <asm/byteorder.h>
+#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
+
+/************************************************************************/
+/* ** LOGO DATA								*/
+/************************************************************************/
+#ifdef CONFIG_LCD_LOGO
+# include <bmp_logo.h>		/* Get logo data, width and height	*/
+#endif
+
+/*
+ *  Information about displays we are using. This is for configuring
+ *  the LCD controller and memory allocation. Someone has to know what
+ *  is connected, as we can't autodetect anything.
+ */
+#define CFG_HIGH	0	/* Pins are active high			*/
+#define CFG_LOW		1	/* Pins are active low			*/
+
+#define LCD_MONOCHROME	0
+#define LCD_COLOR2	1
+#define LCD_COLOR4	2
+#define LCD_COLOR8	3
+#define LCD_COLOR16	4
+
+/*----------------------------------------------------------------------*/
+#if defined(LCD_INFO_BELOW_LOGO)
+# define LCD_INFO_X		0
+# define LCD_INFO_Y		(BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
+#elif defined(CONFIG_LCD_LOGO)
+# define LCD_INFO_X		(BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
+# define LCD_INFO_Y		(VIDEO_FONT_HEIGHT)
+#else
+# define LCD_INFO_X		(VIDEO_FONT_WIDTH)
+# define LCD_INFO_Y		(VIDEO_FONT_HEIGHT)
+#endif
+
+/* Default to 8bpp if bit depth not specified */
+#ifndef LCD_BPP
+# define LCD_BPP			LCD_COLOR8
+#endif
+#ifndef LCD_DF
+# define LCD_DF			1
+#endif
+
+/* Calculate nr. of bits per pixel  and nr. of colors */
+#define NBITS(bit_code)		(1 << (bit_code))
+#define NCOLORS(bit_code)	(1 << NBITS(bit_code))
+
+/************************************************************************/
+/* ** CONSOLE CONSTANTS							*/
+/************************************************************************/
+#if LCD_BPP == LCD_MONOCHROME
+
+/*
+ * Simple black/white definitions
+ */
+# define CONSOLE_COLOR_BLACK	0
+# define CONSOLE_COLOR_WHITE	1	/* Must remain last / highest	*/
+
+#elif LCD_BPP == LCD_COLOR8
+
+/*
+ * 8bpp color definitions
+ */
+# define CONSOLE_COLOR_BLACK	0
+# define CONSOLE_COLOR_RED	1
+# define CONSOLE_COLOR_GREEN	2
+# define CONSOLE_COLOR_YELLOW	3
+# define CONSOLE_COLOR_BLUE	4
+# define CONSOLE_COLOR_MAGENTA	5
+# define CONSOLE_COLOR_CYAN	6
+# define CONSOLE_COLOR_GREY	14
+# define CONSOLE_COLOR_WHITE	15	/* Must remain last / highest	*/
+
+#else
+
+/*
+ * 16bpp color definitions
+ */
+# define CONSOLE_COLOR_BLACK	0x0000
+# define CONSOLE_COLOR_WHITE	0xffff	/* Must remain last / highest	*/
+
+#endif /* color definitions */
+
+#if defined(CONFIG_LCD_LOGO) && (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET)
+# error Default Color Map overlaps with Logo Color Map
 #endif
+
+/************************************************************************/
+#ifndef PAGE_SIZE
+# define PAGE_SIZE	4096
+#endif
+
+/************************************************************************/
+/* ** CONSOLE DEFINITIONS & FUNCTIONS					*/
+/************************************************************************/
+#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
+# define CONSOLE_ROWS		((panel_info.vl_row-BMP_LOGO_HEIGHT) \
+					/ VIDEO_FONT_HEIGHT)
+#else
+# define CONSOLE_ROWS		(panel_info.vl_row / VIDEO_FONT_HEIGHT)
+#endif
+
+#define CONSOLE_COLS		(panel_info.vl_col / VIDEO_FONT_WIDTH)
+#define CONSOLE_ROW_SIZE	(VIDEO_FONT_HEIGHT * lcd_line_length)
+#define CONSOLE_ROW_FIRST	(lcd_console_address)
+#define CONSOLE_ROW_SECOND	(lcd_console_address + CONSOLE_ROW_SIZE)
+#define CONSOLE_ROW_LAST	(lcd_console_address + CONSOLE_SIZE \
+					- CONSOLE_ROW_SIZE)
+#define CONSOLE_SIZE		(CONSOLE_ROW_SIZE * CONSOLE_ROWS)
+#define CONSOLE_SCROLL_SIZE	(CONSOLE_SIZE - CONSOLE_ROW_SIZE)
+
+#if LCD_BPP == LCD_MONOCHROME
+# define COLOR_MASK(c)		((c)	  | (c) << 1 | (c) << 2 | (c) << 3 | \
+				 (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
+#elif LCD_BPP == LCD_COLOR8
+# define COLOR_MASK(c)		(c)
+#else
+# error Unsupported LCD BPP.
+#endif
+
+/************************************************************************/
+
+#endif	/* _LCD_H_ */
diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c
index 6855d5f94..bf265666c 100644
--- a/lib_arm/armlinux.c
+++ b/lib_arm/armlinux.c
@@ -38,7 +38,8 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
     defined (CONFIG_INITRD_TAG) || \
     defined (CONFIG_SERIAL_TAG) || \
     defined (CONFIG_REVISION_TAG) || \
-    defined (CONFIG_VFD)
+    defined (CONFIG_VFD) || \
+    defined (CONFIG_LCD)
 static void setup_start_tag (bd_t *bd);
 
 # ifdef CONFIG_SETUP_MEMORY_TAGS
@@ -55,7 +56,7 @@ static void setup_initrd_tag (bd_t *bd, ulong initrd_start,
 # endif
 static void setup_end_tag (bd_t *bd);
 
-# if defined (CONFIG_VFD)
+# if defined (CONFIG_VFD) || defined (CONFIG_LCD)
 static void setup_videolfb_tag (gd_t *gd);
 # endif
 
@@ -229,6 +230,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
     defined (CONFIG_INITRD_TAG) || \
     defined (CONFIG_SERIAL_TAG) || \
     defined (CONFIG_REVISION_TAG) || \
+    defined (CONFIG_LCD) || \
     defined (CONFIG_VFD)
 	setup_start_tag (bd);
 #ifdef CONFIG_SERIAL_TAG
@@ -247,7 +249,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 	if (initrd_start && initrd_end)
 		setup_initrd_tag (bd, initrd_start, initrd_end);
 #endif
-#if defined (CONFIG_VFD)
+#if defined (CONFIG_VFD) || defined (CONFIG_LCD)
 	setup_videolfb_tag ((gd_t *) gd);
 #endif
 	setup_end_tag (bd);
@@ -274,6 +276,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
     defined (CONFIG_INITRD_TAG) || \
     defined (CONFIG_SERIAL_TAG) || \
     defined (CONFIG_REVISION_TAG) || \
+    defined (CONFIG_LCD) || \
     defined (CONFIG_VFD)
 static void setup_start_tag (bd_t *bd)
 {
@@ -351,7 +354,8 @@ static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end)
 #endif /* CONFIG_INITRD_TAG */
 
 
-#if defined (CONFIG_VFD)
+#if defined (CONFIG_VFD) || defined (CONFIG_LCD)
+extern ulong calc_fbsize (void);
 static void setup_videolfb_tag (gd_t *gd)
 {
 	/* An ATAG_VIDEOLFB node tells the kernel where and how large
@@ -365,12 +369,13 @@ static void setup_videolfb_tag (gd_t *gd)
 	params->hdr.size = tag_size (tag_videolfb);
 
 	params->u.videolfb.lfb_base = (u32) gd->fb_base;
-	/* 7168 = 256*4*56/8 - actually 2 pages (8192 bytes) are allocated */
-	params->u.videolfb.lfb_size = 7168;
+	/* Fb size is calculated according to parameters for our panel
+	 */
+	params->u.videolfb.lfb_size = calc_fbsize();
 
 	params = tag_next (params);
 }
-#endif
+#endif /* CONFIG_VFD || CONFIG_LCD */
 
 static void setup_end_tag (bd_t *bd)
 {
diff --git a/tools/bmp_logo.c b/tools/bmp_logo.c
index c473baa0d..8e728e23c 100644
--- a/tools/bmp_logo.c
+++ b/tools/bmp_logo.c
@@ -120,25 +120,13 @@ int main (int argc, char *argv[])
 		b->palette[(int)(i*3+0)] = fgetc(fp);
 		x=fgetc(fp);
 
-#if 0
-		if ((i%4) == 0)
-			putchar ('\t');
-		printf ("0x%02X, 0x%02X, 0x%02X,%s",
-			b->palette[(int)(i*3+0)],
-			b->palette[(int)(i*3+1)],
-			b->palette[(int)(i*3+2)],
-			((i%4) == 3) ? "\n" : "	   "
-		);
-#else
-		if ((i%8) == 0)
-			putchar ('\t');
-		printf ("0x0%X%X%X,%s",
+		printf ("%s0x0%X%X%X,%s",
+			((i%8) == 0) ? "\t" : "  ",
 			(b->palette[(int)(i*3+0)] >> 4) & 0x0F,
 			(b->palette[(int)(i*3+1)] >> 4) & 0x0F,
 			(b->palette[(int)(i*3+2)] >> 4) & 0x0F,
-			((i%8) == 7) ? "\n" : "  "
+			((i%8) == 7) ? "\n" : ""
 		);
-#endif
 	}
 
 	/* read the bitmap; leave room for default color map */