Cleanup build problems (on Fedora Core x86_64 build host)

8 files changed, 425 insertions, 102 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 343080c20..6d3bb93b0 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
 Changes for U-Boot 1.1.3:
 ======================================================================
 
+* Cleanup build problems on 64 bit build hosts
+
 * Update MAINTAINERS file
 
 * Patch by Stefan Roese, 01 Aug 2005:
diff --git a/MAINTAINERS b/MAINTAINERS
index 0bcad8e12..0fff4f608 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -129,6 +129,34 @@ Thomas Frieden <ThomasF@hyperion-entertainment.com>
 
 	AmigaOneG3SE		MPC7xx
 
+Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+	ADCIOP			IOP480 (PPC401)
+	APC405			PPC405GP
+	AR405			PPC405GP
+	ASH405			PPC405EP
+	CANBT			PPC405CR
+	CPCI405			PPC405GP
+	CPCI4052		PPC405GP
+	CPCI405AB		PPC405GP
+	CPCI405DT		PPC405GP
+	CPCI440			PPC440GP
+	CPCIISER4		PPC405GP
+	DASA_SIM		IOP480 (PPC401)
+	DP405			PPC405EP
+	DU405			PPC405GP
+	G2000			PPC405EP
+	HH405			PPC405EP
+	HUB405			PPC405EP
+	OCRTC			PPC405GP
+	ORSG			PPC405GP
+	PCI405			PPC405GP
+	PLU405			PPC405EP
+	PMC405			PPC405GP
+	VOH405			PPC405EP
+	VOM405			PPC405EP
+	WUH405			PPC405EP
+
 Frank Gottschling <fgottschling@eltec.de>
 
 	MHPC			MPC8xx
@@ -168,10 +196,6 @@ Sangmoon Kim <dogoil@etinsys.com>
 
 	debris			MPC8245
 
-Nye Liu <nyet@zumanetworks.com>
-
-	ZUMA			MPC7xx_74xx
-
 Thomas Lange <thomas@corelatus.se>
 
 	GTH			MPC860
@@ -180,6 +204,21 @@ The LEOX team <team@leox.org>
 
 	ELPT860			MPC860T
 
+Nye Liu <nyet@zumanetworks.com>
+
+	ZUMA			MPC7xx_74xx
+
+Jon Loeliger <jdl@freescale.com>
+
+	MPC8540ADS		MPC8540
+	MPC8560ADS		MPC8560
+	MPC8541CDS		MPC8541
+	MPC8555CDS		MPC8555
+
+Dan Malek <dan@embeddededge.com>
+
+	STxGP3			MPC85xx
+
 Eran Man <eran@nbase.co.il>
 
 	EVB64260_750CX		MPC750CX
@@ -194,6 +233,7 @@ Reinhard Meyer <r.meyer@emk-elektronik.de>
 	TOP5200			MPC5200
 
 Tolunay Orkun <torkun@nextio.com>
+
 	csb272			PPC405GP
 	csb472			PPC405GP
 
@@ -202,17 +242,6 @@ Keith Outwater <Keith_Outwater@mvis.com>
 	GEN860T			MPC860T
 	GEN860T_SC		MPC860T
 
-Stefan Roese <sr@denx.de>
-
-	bamboo			PPC440EP
-	bunbinga		PPC405EP
-	ebony			PPC440GP
-	ocotea			PPC440GX
-	sycamore		PPC405GPr
-	walnut			PPC405GP
-	yellowstone		PPC440GR
-	yosemite		PPC440EP
-
 Frank Panno <fpanno@delphintech.com>
 
 	ep8260			MPC8260
@@ -234,33 +263,20 @@ Daniel Poirot <dan.poirot@windriver.com>
 	sbc8240			MPC8240
 	sbc405			PPC405GP
 
-Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Stefan Roese <sr@denx.de>
 
-	ADCIOP			IOP480 (PPC401)
-	APC405			PPC405GP
-	AR405			PPC405GP
-	ASH405			PPC405EP
-	CANBT			PPC405CR
-	CPCI405			PPC405GP
-	CPCI4052		PPC405GP
-	CPCI405AB		PPC405GP
-	CPCI405DT		PPC405GP
-	CPCI440			PPC440GP
-	CPCIISER4		PPC405GP
-	DASA_SIM		IOP480 (PPC401)
-	DP405			PPC405EP
-	DU405			PPC405GP
-	G2000			PPC405EP
-	HH405			PPC405EP
-	HUB405			PPC405EP
-	OCRTC			PPC405GP
-	ORSG			PPC405GP
-	PCI405			PPC405GP
-	PLU405			PPC405EP
-	PMC405			PPC405GP
-	VOH405			PPC405EP
-	VOM405			PPC405EP
-	WUH405			PPC405EP
+	bamboo			PPC440EP
+	bunbinga		PPC405EP
+	ebony			PPC440GP
+	ocotea			PPC440GX
+	sycamore		PPC405GPr
+	walnut			PPC405GP
+	yellowstone		PPC440GR
+	yosemite		PPC440EP
+
+Yusdi Santoso <yusdi_santoso@adaptec.com>
+
+	HIDDEN_DRAGON	MPC8241/MPC8245
 
 Travis Sawyer (travis.sawyer@sandburst.com>
 
@@ -297,21 +313,6 @@ John Zhan <zhanz@sinovee.com>
 
 	svm_sc8xx		MPC8xx
 
-Jon Loeliger <jdl@freescale.com>
-
-	MPC8540ADS		MPC8540
-	MPC8560ADS		MPC8560
-	MPC8541CDS		MPC8541
-	MPC8555CDS		MPC8555
-
-Dan Malek <dan@embeddededge.com>
-
-	STxGP3			MPC85xx
-
-Yusdi Santoso <yusdi_santoso@adaptec.com>
-
-	HIDDEN_DRAGON	MPC8241/MPC8245
-
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
@@ -346,6 +347,10 @@ Unknown / orphaned boards:
 #	Board			CPU					#
 #########################################################################
 
+Rishi Bhattacharya <rishi@ti.com>
+
+	omap5912osk		ARM926EJS
+
 George G. Davis <gdavis@mvista.com>
 
 	assabet			SA1100
@@ -364,6 +369,11 @@ Marius Gröger <mag@sysgo.de>
 	impa7			ARM720T (EP7211)
 	ep7312			ARM720T (EP7312)
 
+Kshitij Gupta <kshitij@ti.com>
+
+	omap1510inn		ARM925T
+	omap1610inn		ARM926EJS
+
 Kyle Harris <kharris@nexus-tech.net>
 
 	lubbock			xscale
@@ -375,29 +385,13 @@ Gary Jennejohn <gj@denx.de>
 	smdk2400		ARM920T
 	trab			ARM920T
 
-Prakash Kumar <prakash@embedx.com>
-
-	cerf250			xscale
-
-Kshitij Gupta <kshitij@ti.com>
-
-	omap1510inn		ARM925T
-	omap1610inn		ARM926EJS
-
-Dave Peverley <dpeverley@mpc-data.co.uk>
-	omap730p2		ARM926EJS
-
 Nishant Kamat <nskamat@ti.com>
 
 	omap1610h2		ARM926EJS
 
-Rishi Bhattacharya <rishi@ti.com>
-
-	omap5912osk		ARM926EJS
-
-Richard Woodruff <r-woodruff2@ti.com>
+Prakash Kumar <prakash@embedx.com>
 
-	omap2420h4		ARM1136EJS
+	cerf250			xscale
 
 David Müller <d.mueller@elsoft.ch>
 
@@ -408,6 +402,10 @@ Rolf Offermanns <rof@sysgo.de>
 
 	shannon			SA1100
 
+Dave Peverley <dpeverley@mpc-data.co.uk>
+
+	omap730p2		ARM926EJS
+
 Robert Schwebel <r.schwebel@pengutronix.de>
 
 	csb226			xscale
@@ -415,7 +413,7 @@ Robert Schwebel <r.schwebel@pengutronix.de>
 
 Andrea Scian <andrea.scian@dave-tech.it>
 
-	B2				ARM7TDMI (S3C44B0X)
+	B2			ARM7TDMI (S3C44B0X)
 
 Greg Ungerer <greg.ungerer@opengear.com>
 
@@ -423,6 +421,10 @@ Greg Ungerer <greg.ungerer@opengear.com>
 	cm4116			ks8695p
 	cm4148			ks8695p
 
+Richard Woodruff <r-woodruff2@ti.com>
+
+	omap2420h4		ARM1136EJS
+
 Alex Züpke <azu@sysgo.de>
 
 	lart			SA1100
diff --git a/Makefile b/Makefile
index d23a6dde5..b24b26d10 100644
--- a/Makefile
+++ b/Makefile
@@ -881,15 +881,14 @@ yellowstone_config:	unconfig
 #########################################################################
 ## MPC8220 Systems
 #########################################################################
-Alaska8220_config:	unconfig
+
+Alaska8220_config	\
+Yukon8220_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8220 alaska
 
 sorcery_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8220 sorcery
 
-Yukon8220_config:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8220 yukon
-
 #########################################################################
 ## MPC824x Systems
 #########################################################################
diff --git a/board/amcc/yellowstone/flash.c b/board/amcc/yellowstone/flash.c
index 99fcfb5c7..cd6a2e61e 100644
--- a/board/amcc/yellowstone/flash.c
+++ b/board/amcc/yellowstone/flash.c
@@ -329,7 +329,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
 	volatile FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
-	int i;
 
 	if ((s_first < 0) || (s_first > s_last)) {
 		if (info->flash_id == FLASH_UNKNOWN) {
@@ -517,7 +516,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
  */
 static int write_word(flash_info_t * info, ulong dest, ulong data)
 {
-	volatile vu_long *addr2 = (vu_long *) (info->start[0]);
+	vu_long *addr2 = (vu_long *) (info->start[0]);
 	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
 	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
 	ulong start;
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
index 840a46c86..a6b81e600 100644
--- a/board/amcc/yellowstone/yellowstone.c
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -315,10 +315,6 @@ int pci_pre_init(struct pci_controller *hose)
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
-	u16 cmdstat;
-
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*--------------------------------------------------------------------------+
 	 * Set up Direct MMIO registers
 	 *--------------------------------------------------------------------------*/
diff --git a/common/environment.c b/common/environment.c
index 61a8d245f..c7f54c6bd 100644
--- a/common/environment.c
+++ b/common/environment.c
@@ -21,7 +21,12 @@
  * MA 02111-1307 USA
  */
 
+#ifndef __ASSEMBLY__
+#define	__ASSEMBLY__			/* Dirty trick to get only #defines	*/
+#endif
+#define	__ASM_STUB_PROCESSOR_H__	/* don't include asm/processor.		*/
 #include <config.h>
+#undef	__ASSEMBLY__
 #include <environment.h>
 
 /*
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
new file mode 100644
index 000000000..2d3c0e5a9
--- /dev/null
+++ b/include/configs/Yukon8220.h
@@ -0,0 +1,317 @@
+/*
+ * (C) Copyright 2004
+ * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MPC8220		1
+#define CONFIG_YUKON8220	1	/* ... on Yukon board	*/
+
+/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
+   determine the CPU speed. */
+#define CFG_MPC8220_CLKIN	30000000/* ... running at 30MHz */
+#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM		0x02	/* Software reboot	*/
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5   /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+
+/* Define this for PSC console
+#define CONFIG_PSC_CONSOLE	1
+*/
+
+#define CONFIG_EXTUART_CONSOLE	1
+
+#ifdef CONFIG_EXTUART_CONSOLE
+#   define CONFIG_CONS_INDEX	1
+#   define CFG_NS16550_SERIAL
+#   define CFG_NS16550
+#   define CFG_NS16550_REG_SIZE 1
+#   define CFG_NS16550_COM1	(CFG_CPLD_BASE + 0x1008)
+#   define CFG_NS16550_CLK	18432000
+#endif
+
+#define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define CONFIG_TIMESTAMP			/* Print image info with timestamp */
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_BOOTD	| \
+				CFG_CMD_CACHE	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO | \
+				CFG_CMD_SDRAM	| \
+				CFG_CMD_SNTP	)
+
+#define CONFIG_NET_MULTI
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	5    /* autoboot after 5 seconds */
+#define CONFIG_BOOTARGS		"root=/dev/ram rw"
+#define CONFIG_ETHADDR		00:e0:0c:bc:e0:60
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		00:e0:0c:bc:e0:61
+#define CONFIG_IPADDR		192.162.1.2
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_SERVERIP		192.162.1.1
+#define CONFIG_GATEWAYIP	192.162.1.1
+#define CONFIG_HOSTNAME		yukon
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1
+#define CFG_I2C_MODULE		1
+
+#define CFG_I2C_SPEED		100000 /* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR		0x52	/* 1011000xb */
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_PAGE_WRITE_BITS	3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+/*
+#define CFG_ENV_IS_IN_EEPROM	1
+#define CFG_ENV_OFFSET		0
+#define CFG_ENV_SIZE		256
+*/
+
+/* If CFG_AMD_BOOT is defined, the the system will boot from AMD.
+   else undefined it will boot from Intel Strata flash */
+#define CFG_AMD_BOOT		1
+
+/*
+ * Flexbus Chipselect configuration
+ */
+#if defined (CFG_AMD_BOOT)
+#define CFG_CS0_BASE		0xfff0
+#define CFG_CS0_MASK		0x00080000  /* 512 KB */
+#define CFG_CS0_CTRL		0x003f0d40
+
+#define CFG_CS1_BASE		0xfe00
+#define CFG_CS1_MASK		0x01000000  /* 16 MB */
+#define CFG_CS1_CTRL		0x003f1540
+#else
+#define CFG_CS0_BASE		0xff00
+#define CFG_CS0_MASK		0x01000000  /* 16 MB */
+#define CFG_CS0_CTRL		0x003f1540
+
+#define CFG_CS1_BASE		0xfe08
+#define CFG_CS1_MASK		0x00080000  /* 512 KB */
+#define CFG_CS1_CTRL		0x003f0d40
+#endif
+
+#define CFG_CS2_BASE		0xf100
+#define CFG_CS2_MASK		0x00040000
+#define CFG_CS2_CTRL		0x003f1140
+
+#define CFG_CS3_BASE		0xf200
+#define CFG_CS3_MASK		0x00040000
+#define CFG_CS3_CTRL		0x003f1100
+
+
+#define CFG_FLASH0_BASE		(CFG_CS0_BASE << 16)
+#define CFG_FLASH1_BASE		(CFG_CS1_BASE << 16)
+
+#if defined (CFG_AMD_BOOT)
+#define CFG_AMD_BASE		CFG_FLASH0_BASE
+#define CFG_INTEL_BASE		CFG_FLASH1_BASE + 0xf00000
+#define CFG_FLASH_BASE		CFG_AMD_BASE
+#else
+#define CFG_INTEL_BASE		CFG_FLASH0_BASE + 0xf00000
+#define CFG_AMD_BASE		CFG_FLASH1_BASE
+#define CFG_FLASH_BASE		CFG_INTEL_BASE
+#endif
+
+#define CFG_CPLD_BASE		(CFG_CS2_BASE << 16)
+#define CFG_FPGA_BASE		(CFG_CS3_BASE << 16)
+
+
+#define CFG_MAX_FLASH_BANKS	4	/* max num of memory banks	*/
+#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+
+#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CFG_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
+
+#define PHYS_AMD_SECT_SIZE	0x00010000 /*  64 KB sectors (x2) */
+#define PHYS_INTEL_SECT_SIZE	0x00020000 /* 128 KB sectors (x2) */
+
+#define CFG_FLASH_CHECKSUM
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#if defined (CFG_AMD_BOOT)
+#define CFG_ENV_ADDR		(CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE)
+#define CFG_ENV_SIZE		PHYS_AMD_SECT_SIZE
+#define CFG_ENV_SECT_SIZE	PHYS_AMD_SECT_SIZE
+#define CFG_ENV1_ADDR		(CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE)
+#define CFG_ENV1_SIZE		PHYS_INTEL_SECT_SIZE
+#define CFG_ENV1_SECT_SIZE	PHYS_INTEL_SECT_SIZE
+#else
+#define CFG_ENV_ADDR		(CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE)
+#define CFG_ENV_SIZE		PHYS_INTEL_SECT_SIZE
+#define CFG_ENV_SECT_SIZE	PHYS_INTEL_SECT_SIZE
+#define CFG_ENV1_ADDR		(CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE)
+#define CFG_ENV1_SIZE		PHYS_AMD_SECT_SIZE
+#define CFG_ENV1_SECT_SIZE	PHYS_AMD_SECT_SIZE
+#endif
+
+#define CONFIG_ENV_OVERWRITE	1
+
+#if defined CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_EEPROM
+#elif defined CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_IN_EEPROM
+#elif defined CFG_ENV_IS_IN_EEPROM
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#endif
+
+#ifndef CFG_JFFS2_FIRST_SECTOR
+#define CFG_JFFS2_FIRST_SECTOR	0
+#endif
+#ifndef CFG_JFFS2_FIRST_BANK
+#define CFG_JFFS2_FIRST_BANK	0
+#endif
+#ifndef CFG_JFFS2_NUM_BANKS
+#define CFG_JFFS2_NUM_BANKS	1
+#endif
+#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_DEFAULT_MBAR	0x80000000
+#define CFG_SRAM_BASE		(CFG_MBAR + 0x20000)
+#define CFG_SRAM_SIZE		0x8000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	(CFG_MBAR + 0x20000)
+#define CFG_INIT_RAM_END	0x8000	/* End of used area in DPRAM */
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#define CFG_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
+#define CFG_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
+#define CFG_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
+
+/* SDRAM configuration */
+#define CFG_SDRAM_TOTAL_BANKS		2
+#define CFG_SDRAM_SPD_I2C_ADDR		0x51		/* 7bit */
+#define CFG_SDRAM_SPD_SIZE		0x40
+#define CFG_SDRAM_CAS_LATENCY		4		/* (CL=2)x2 */
+
+/* SDRAM drive strength register */
+#define CFG_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_LOW  << SDRAMDS_SBE_SHIFT) | \
+					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
+					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBA_SHIFT) | \
+					 (DRIVE_STRENGTH_OFF  << SDRAMDS_SBS_SHIFT) | \
+					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBD_SHIFT))
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC8220_FEC	1
+#define CONFIG_FEC_10MBIT	1 /* Workaround for FEC 100Mbit problem */
+#define CONFIG_PHY_ADDR		0x18
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			    /* undef to save memory	*/
+#define CFG_PROMPT		"=> "	    /* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	    /* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE		256	    /* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16	    /* max number of command args   */
+#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size    */
+
+#define CFG_MEMTEST_START	0x00100000  /* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
+
+#define CFG_LOAD_ADDR		0x100000    /* default load address */
+
+#define CFG_HZ			1000	    /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+
+#endif /* __CONFIG_H */
diff --git a/tools/envcrc.c b/tools/envcrc.c
index 5f13a6393..7b7718324 100644
--- a/tools/envcrc.c
+++ b/tools/envcrc.c
@@ -25,7 +25,10 @@
 #include <stdlib.h>
 #include <unistd.h>
 
-#define	__ASSEMBLY__	/* Dirty trick to get only #defines */
+#ifndef __ASSEMBLY__
+#define	__ASSEMBLY__			/* Dirty trick to get only #defines	*/
+#endif
+#define	__ASM_STUB_PROCESSOR_H__	/* don't include asm/processor.		*/
 #include <config.h>
 #undef	__ASSEMBLY__
 
@@ -73,24 +76,24 @@ extern unsigned char environment;
 int main (int argc, char **argv)
 {
 #ifdef	ENV_IS_EMBEDDED
-    int crc ;
-    unsigned char 	*envptr 	= &environment,
-			*dataptr 	= envptr + ENV_HEADER_SIZE;
-    unsigned int	datasize 	= ENV_SIZE;
+	int crc;
+	unsigned char *envptr = &environment,
+		*dataptr = envptr + ENV_HEADER_SIZE;
+	unsigned int datasize = ENV_SIZE;
 
-    crc = crc32(0, dataptr, datasize) ;
+	crc = crc32 (0, dataptr, datasize);
 
-    /* Check if verbose mode is activated passing a parameter to the program */
-    if (argc > 1) {
-	printf("CRC32 from offset %08X to %08X of environment = %08X\n",
-	    (unsigned int)(dataptr - envptr),
-	    (unsigned int)(dataptr - envptr) + datasize,
-	    crc);
-    } else {
-	printf("0x%08X\n", crc);
-    }
+	/* Check if verbose mode is activated passing a parameter to the program */
+	if (argc > 1) {
+		printf ("CRC32 from offset %08X to %08X of environment = %08X\n",
+			(unsigned int) (dataptr - envptr),
+			(unsigned int) (dataptr - envptr) + datasize,
+			crc);
+	} else {
+		printf ("0x%08X\n", crc);
+	}
 #else
-	printf("0\n");
+	printf ("0\n");
 #endif
-    return EXIT_SUCCESS;
+	return EXIT_SUCCESS;
 }