Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux.git

37 files changed, 987 insertions, 249 deletions

diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
index eec3b9c4c713..7e091eaffc18 100644
--- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
@@ -18,6 +18,7 @@ properties:
     enum:
       - mediatek,mt8183-scp
       - mediatek,mt8186-scp
+      - mediatek,mt8188-scp
       - mediatek,mt8192-scp
       - mediatek,mt8195-scp
 
@@ -80,6 +81,7 @@ allOf:
           enum:
             - mediatek,mt8183-scp
             - mediatek,mt8186-scp
+            - mediatek,mt8188-scp
     then:
       properties:
         reg:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 947f94548d0e..3072af5f9d79 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -67,13 +67,28 @@ properties:
     minItems: 1
     maxItems: 8
 
+  interconnects:
+    maxItems: 1
+
   interrupts:
     minItems: 5
-    maxItems: 6
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
 
   interrupt-names:
     minItems: 5
-    maxItems: 6
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
 
   resets:
     minItems: 1
@@ -116,7 +131,6 @@ properties:
       - description: Stop the modem
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
     description: The names of the state bits used for SMP2P output
     items:
       - const: stop
@@ -134,13 +148,13 @@ properties:
       three offsets within syscon for q6, modem and nc halt registers.
 
   smd-edge:
-    type: object
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
     description:
       Qualcomm Shared Memory subnode which represents communication edge,
       channels and devices related to the ADSP.
 
   glink-edge:
-    type: object
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
     description:
       Qualcomm G-Link subnode which represents communication edge, channels
       and devices related to the ADSP.
@@ -315,19 +329,9 @@ allOf:
     then:
       properties:
         interrupts:
-          items:
-            - description: Watchdog interrupt
-            - description: Fatal interrupt
-            - description: Ready interrupt
-            - description: Handover interrupt
-            - description: Stop acknowledge interrupt
+          maxItems: 5
         interrupt-names:
-          items:
-            - const: wdog
-            - const: fatal
-            - const: ready
-            - const: handover
-            - const: stop-ack
+          maxItems: 5
 
   - if:
       properties:
@@ -345,21 +349,9 @@ allOf:
     then:
       properties:
         interrupts:
-          items:
-            - description: Watchdog interrupt
-            - description: Fatal interrupt
-            - description: Ready interrupt
-            - description: Handover interrupt
-            - description: Stop acknowledge interrupt
-            - description: Shutdown acknowledge interrupt
+          minItems: 6
         interrupt-names:
-          items:
-            - const: wdog
-            - const: fatal
-            - const: ready
-            - const: handover
-            - const: stop-ack
-            - const: shutdown-ack
+          minItems: 6
 
   - if:
       properties:
@@ -379,6 +371,8 @@ allOf:
               - qcom,msm8226-adsp-pil
               - qcom,msm8996-adsp-pil
               - qcom,msm8998-adsp-pas
+              - qcom,sm8150-adsp-pas
+              - qcom,sm8150-cdsp-pas
     then:
       properties:
         power-domains:
@@ -447,19 +441,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sm8150-adsp-pas
-              - qcom,sm8150-cdsp-pas
-    then:
-      properties:
-        power-domains:
-          items:
-            - description: CX power domain
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
               - qcom,sc7280-mpss-pas
               - qcom,sdx55-mpss-pas
               - qcom,sm6350-mpss-pas
@@ -594,11 +575,12 @@ allOf:
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     adsp {
         compatible = "qcom,msm8974-adsp-pil";
 
-        interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
                       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
                       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
                       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -620,7 +602,7 @@ examples:
         qcom,smem-state-names = "stop";
 
         smd-edge {
-            interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
+            interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 
             qcom,ipc = <&apcs 8 8>;
             qcom,smd-edge = <1>;
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
new file mode 100644
index 000000000000..fa69f7b21eed
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,glink-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm G-Link Edge communication channel nodes
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm G-Link subnode represents communication edge, channels and devices
+  related to the remote processor.
+
+properties:
+  $nodename:
+    const: "glink-edge"
+
+  apr:
+    $ref: /schemas/soc/qcom/qcom,apr.yaml#
+    description:
+      Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
+
+  fastrpc:
+    type: object
+    description:
+      See Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
+
+  interrupts:
+    maxItems: 1
+
+  label:
+    description: The names of the state bits used for SMP2P output
+
+  mboxes:
+    maxItems: 1
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      ID of the shared memory used by GLINK for communication with remote
+      processor.
+
+required:
+  - interrupts
+  - label
+  - mboxes
+  - qcom,remote-pid
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc@8a00000 {
+        reg = <0x08a00000 0x10000>;
+        // ...
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_WPSS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "wpss";
+            qcom,remote-pid = <13>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 658f96fbc4fe..d0ebd16ee0e1 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -14,8 +14,6 @@ on the Qualcomm Hexagon core.
 		    "qcom,msm8974-mss-pil"
 		    "qcom,msm8996-mss-pil"
 		    "qcom,msm8998-mss-pil"
-		    "qcom,sc7180-mss-pil"
-		    "qcom,sc7280-mss-pil"
 		    "qcom,sdm845-mss-pil"
 
 - reg:
@@ -47,8 +45,6 @@ on the Qualcomm Hexagon core.
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
-	qcom,sc7180-mss-pil:
-	qcom,sc7280-mss-pil:
 	qcom,sdm845-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
 		    "shutdown-ack"
@@ -86,11 +82,6 @@ on the Qualcomm Hexagon core.
 	qcom,msm8998-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "qdss"
-	qcom,sc7180-mss-pil:
-		    must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
-		    "nav"
-	qcom,sc7280-mss-pil:
-		    must be "iface", "xo", "snoc_axi", "offline", "pka"
 	qcom,sdm845-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "prng"
@@ -102,7 +93,7 @@ on the Qualcomm Hexagon core.
 		    reference to the list of 3 reset-controllers for the
 		    wcss sub-system
 		    reference to the list of 2 reset-controllers for the modem
-		    sub-system on SC7180, SC7280, SDM845 SoCs
+		    sub-system on SDM845 SoCs
 
 - reset-names:
 	Usage: required
@@ -111,7 +102,7 @@ on the Qualcomm Hexagon core.
 		    must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
 		    for the wcss sub-system
 		    must be "mss_restart", "pdc_reset" for the modem
-		    sub-system on SC7180, SC7280, SDM845 SoCs
+		    sub-system on SDM845 SoCs
 
 For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
 should be referenced as follows:
@@ -176,10 +167,6 @@ For the compatible string below the following supplies are required:
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
 		    must be "cx", "mx"
-	qcom,sc7180-mss-pil:
-		    must be "cx", "mx", "mss"
-	qcom,sc7280-mss-pil:
-		    must be "cx", "mss"
 	qcom,sdm845-mss-pil:
 		    must be "cx", "mx", "mss"
 
@@ -205,36 +192,6 @@ For the compatible string below the following supplies are required:
 	Definition: a phandle reference to a syscon representing TCSR followed
 		    by the three offsets within syscon for q6, modem and nc
 		    halt registers.
-		    a phandle reference to a syscon representing TCSR followed
-		    by the four offsets within syscon for q6, modem, nc and vq6
-		    halt registers on SC7280 SoCs.
-
-For the compatible strings below the following phandle references are required:
-  "qcom,sc7180-mss-pil"
-- qcom,spare-regs:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: a phandle reference to a syscon representing TCSR followed
-		    by the offset within syscon for conn_box_spare0 register
-		    used by the modem sub-system running on SC7180 SoC.
-
-For the compatible strings below the following phandle references are required:
-  "qcom,sc7280-mss-pil"
-- qcom,ext-regs:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: two phandle references to syscons representing TCSR_REG and
-		    TCSR register space followed by the two offsets within the syscon
-		    to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off
-		    registers respectively.
-
-- qcom,qaccept-regs:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: a phandle reference to a syscon representing TCSR followed
-		    by the three offsets within syscon for mdm, cx and axi
-		    qaccept registers used by the modem sub-system running on
-		    SC7280 SoC.
 
 The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
 on platforms which do not have TrustZone.
@@ -257,29 +214,23 @@ related to the Hexagon.  See ../soc/qcom/qcom,smd.yaml and
 The following example describes the resources needed to boot control the
 Hexagon, as it is found on MSM8974 boards.
 
-	modem-rproc@fc880000 {
-		compatible = "qcom,q6v5-pil";
-		reg = <0xfc880000 0x100>,
-		      <0xfc820000 0x020>;
+	remoteproc@fc880000 {
+		compatible = "qcom,msm8974-mss-pil";
+		reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
 		reg-names = "qdsp6", "rmb";
 
-		interrupts-extended = <&intc 0 24 1>,
-				      <&modem_smp2p_in 0 0>,
-				      <&modem_smp2p_in 1 0>,
-				      <&modem_smp2p_in 2 0>,
-				      <&modem_smp2p_in 3 0>;
-		interrupt-names = "wdog",
-				  "fatal",
-				  "ready",
-				  "handover",
-				  "stop-ack";
+		interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 
 		clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
 			 <&gcc GCC_MSS_CFG_AHB_CLK>,
-			 <&gcc GCC_BOOT_ROM_AHB_CLK>;
-		clock-names = "iface", "bus", "mem";
-
-		qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+			 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+			 <&xo_board>;
+		clock-names = "iface", "bus", "mem", "xo";
 
 		resets = <&gcc GCC_MSS_RESTART>;
 		reset-names = "mss_restart";
@@ -289,6 +240,8 @@ Hexagon, as it is found on MSM8974 boards.
 		mx-supply = <&pm8841_s1>;
 		pll-supply = <&pm8941_l12>;
 
+		qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
 		qcom,smem-states = <&modem_smp2p_out 0>;
 		qcom,smem-state-names = "stop";
 
@@ -299,4 +252,13 @@ Hexagon, as it is found on MSM8974 boards.
 		mpss {
 			memory-region = <&mpss_region>;
 		};
+
+		smd-edge {
+			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&apcs 8 12>;
+			qcom,smd-edge = <0>;
+
+			label = "modem";
+		};
 	};
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
index 31413cfe10db..06f5f93f62a9 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
@@ -90,7 +90,6 @@ properties:
       - description: Stop the modem
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string
     description: The names of the state bits used for SMP2P output
     items:
       - const: stop
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
new file mode 100644
index 000000000000..e76c861165dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
@@ -0,0 +1,245 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 MSS Peripheral Image Loader
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  This document describes the hardware for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. SC7180 Modem Hexagon Core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-mss-pil
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  iommus:
+    items:
+      - description: MSA Stream 1
+      - description: MSA Stream 2
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: GCC MSS IFACE clock
+      - description: GCC MSS BUS clock
+      - description: GCC MSS NAV clock
+      - description: GCC MSS SNOC_AXI clock
+      - description: GCC MSS MFAB_AXIS clock
+      - description: RPMH XO clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nav
+      - const: snoc_axi
+      - const: mnoc_axi
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+      - description: MSS power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+      - const: mss
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC reset
+
+  reset-names:
+    items:
+      - const: mss_restart
+      - const: pdc_reset
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: modem reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+
+  qcom,spare-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Spare registers are multipurpose registers used for errata
+      handling.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the conn_box_spare0 register
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the DSP.
+
+    properties:
+      interrupts:
+        items:
+          - description: IRQ from MSS to GLINK
+
+      mboxes:
+        items:
+          - description: Mailbox for communication between APPS and MSS
+
+      label:
+        const: modem
+
+      apr: false
+      fastrpc: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - iommus
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,spare-regs
+  - memory-region
+  - qcom,qmp
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - glink-edge
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+    remoteproc_mpss: remoteproc@4080000 {
+        compatible = "qcom,sc7180-mss-pil";
+        reg = <0x04080000 0x10000>, <0x04180000 0x48>;
+        reg-names = "qdsp6", "rmb";
+
+        iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+
+        interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+                 <&gcc GCC_MSS_NAV_AXI_CLK>,
+                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "bus", "nav", "snoc_axi",
+                      "mnoc_axi", "xo";
+
+        power-domains = <&rpmhpd SC7180_CX>,
+                        <&rpmhpd SC7180_MX>,
+                        <&rpmhpd SC7180_MSS>;
+        power-domain-names = "cx", "mx", "mss";
+
+        memory-region = <&mba_mem>, <&mpss_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+        reset-names = "mss_restart", "pdc_reset";
+
+        qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+        qcom,spare-regs = <&tcsr_regs 0xb3e4>;
+
+        glink-edge {
+            interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&apss_shared 12>;
+            qcom,remote-pid = <1>;
+            label = "modem";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
new file mode 100644
index 000000000000..da1a5de3d38b
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 MSS Peripheral Image Loader
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  This document describes the hardware for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. SC7280 Modem Hexagon Core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-mss-pil
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  iommus:
+    items:
+      - description: MSA Stream 1
+      - description: MSA Stream 2
+
+  interconnects:
+    items:
+      - description: Path leading to system memory
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: GCC MSS IFACE clock
+      - description: GCC MSS OFFLINE clock
+      - description: GCC MSS SNOC_AXI clock
+      - description: RPMH PKA clock
+      - description: RPMH XO clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: offline
+      - const: snoc_axi
+      - const: pka
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MSS power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mss
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC reset
+
+  reset-names:
+    items:
+      - const: mss_restart
+      - const: pdc_reset
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: modem reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+          - description: offset to the vq6 halt register
+
+  qcom,ext-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: EXT registers are used for various power related functionality
+    items:
+      - items:
+          - description: phandle to TCSR_REG registers
+          - description: offset to the force_clk_en register
+          - description: offset to the rscc_disable register
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the axim1_clk_off register
+          - description: offset to the crypto_clk_off register
+
+  qcom,qaccept-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: QACCEPT registers are used to bring up/down Q-channels
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the mdm qaccept register
+          - description: offset to the cx qaccept register
+          - description: offset to the axi qaccept register
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the DSP.
+
+    properties:
+      interrupts:
+        items:
+          - description: IRQ from MSS to GLINK
+
+      mboxes:
+        items:
+          - description: Mailbox for communication between APPS and MSS
+
+      label:
+        const: modem
+
+      apr: false
+      fastrpc: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - iommus
+  - interconnects
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,ext-regs
+  - qcom,qaccept-regs
+  - memory-region
+  - qcom,qmp
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - glink-edge
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+    remoteproc_mpss: remoteproc@4080000 {
+        compatible = "qcom,sc7280-mss-pil";
+        reg = <0x04080000 0x10000>, <0x04180000 0x48>;
+        reg-names = "qdsp6", "rmb";
+
+        iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+
+        interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+        interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
+                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                 <&rpmhcc RPMH_PKA_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
+
+        power-domains = <&rpmhpd SC7280_CX>,
+                        <&rpmhpd SC7280_MSS>;
+        power-domain-names = "cx", "mss";
+
+        memory-region = <&mba_mem>, <&mpss_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+        reset-names = "mss_restart", "pdc_reset";
+
+        qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+        qcom,ext-regs = <&tcsr 0x10000 0x10004>, <&tcsr_mutex 0x26004 0x26008>;
+        qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>;
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+                                   IPCC_MPROC_SIGNAL_GLINK_QMP
+                                   IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_MPSS
+                      IPCC_MPROC_SIGNAL_GLINK_QMP>;
+            label = "modem";
+            qcom,remote-pid = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index d99a729d2710..3f06d66cbe47 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -76,7 +76,7 @@ properties:
       - const: pdc_sync
 
   memory-region:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
@@ -102,13 +102,12 @@ properties:
       - description: Stop the modem
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string
     description: The names of the state bits used for SMP2P output
     const: stop
 
   glink-edge:
-    type: object
-    description: |
+    $ref: qcom,glink-edge.yaml#
+    description:
       Qualcomm G-Link subnode which represents communication edge, channels
       and devices related to the ADSP.
 
@@ -122,21 +121,11 @@ properties:
           - description: Mailbox for communication between APPS and WPSS
 
       label:
-        description: The names of the state bits used for SMP2P output
         items:
           - const: wpss
 
-      qcom,remote-pid:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: ID of the shared memory used by GLINK for communication with WPSS
-
-    required:
-      - interrupts
-      - mboxes
-      - label
-      - qcom,remote-pid
-
-    additionalProperties: false
+      apr: false
+      fastrpc: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
index 1535bbbe25da..20df83a96ef3 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
@@ -90,7 +90,6 @@ properties:
       - description: Stop the modem
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string
     description: The names of the state bits used for SMP2P output
     items:
       - const: stop
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
new file mode 100644
index 000000000000..06eebf791e32
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,smd-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SMD Edge communication channel nodes
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm SMD subnode represents a remote subsystem or a remote processor of
+  some sort - or in SMD language an "edge". The name of the edges are not
+  important.
+  See also Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
+
+properties:
+  $nodename:
+    const: "smd-edge"
+
+  interrupts:
+    maxItems: 1
+
+  label:
+    description:
+      Name of the edge, used for debugging and identification purposes. The
+      node name will be used if this is not present.
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client.
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the
+      remote processor.
+
+  qcom,smd-edge:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the remote processor in the smd channel allocation
+      table.
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier for the remote processor as known by the rest of the
+      system.
+
+required:
+  - interrupts
+  - qcom,smd-edge
+
+oneOf:
+  - required:
+      - mboxes
+  - required:
+      - qcom,ipc
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc {
+        // ...
+
+        smd-edge {
+            interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,ipc = <&apcs 8 8>;
+            qcom,smd-edge = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
index d7c3a78e37e6..cd55d80137f7 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
@@ -36,17 +36,18 @@ properties:
     enum:
       - ti,am3356-pru   # for AM335x SoC family (AM3356+ SoCs only)
       - ti,am4376-pru   # for AM437x SoC family (AM4376+ SoCs only)
+      - ti,am5728-pru   # for AM57xx SoC family
+      - ti,am625-pru    # for PRUs in K3 AM62x SoC family
       - ti,am642-pru    # for PRUs in K3 AM64x SoC family
       - ti,am642-rtu    # for RTUs in K3 AM64x SoC family
       - ti,am642-tx-pru # for Tx_PRUs in K3 AM64x SoC family
-      - ti,am5728-pru   # for AM57xx SoC family
-      - ti,k2g-pru      # for 66AK2G SoC family
       - ti,am654-pru    # for PRUs in K3 AM65x SoC family
       - ti,am654-rtu    # for RTUs in K3 AM65x SoC family
       - ti,am654-tx-pru # for Tx_PRUs in K3 AM65x SR2.0 SoCs
       - ti,j721e-pru    # for PRUs in K3 J721E SoC family
       - ti,j721e-rtu    # for RTUs in K3 J721E SoC family
       - ti,j721e-tx-pru # for Tx_PRUs in K3 J721E SoC family
+      - ti,k2g-pru      # for 66AK2G SoC family
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
index bca07bb13ebf..62bebb5f83bc 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
@@ -28,44 +28,6 @@ patternProperties:
       edges are not important.
 
     properties:
-      interrupts:
-        maxItems: 1
-
-      label:
-        $ref: /schemas/types.yaml#/definitions/string
-        description:
-          Name of the edge, used for debugging and identification purposes. The
-          node name will be used if this is not present.
-
-      mboxes:
-        maxItems: 1
-        description:
-          Reference to the mailbox representing the outgoing doorbell in APCS for
-          this client.
-
-      qcom,ipc:
-        $ref: /schemas/types.yaml#/definitions/phandle-array
-        items:
-          - items:
-              - description: phandle to a syscon node representing the APCS registers
-              - description: u32 representing offset to the register within the syscon
-              - description: u32 representing the ipc bit within the register
-        description:
-          Three entries specifying the outgoing ipc bit used for signaling the
-          remote processor.
-
-      qcom,smd-edge:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description:
-          The identifier of the remote processor in the smd channel allocation
-          table.
-
-      qcom,remote-pid:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description:
-          The identifier for the remote processor as known by the rest of the
-          system.
-
       rpm-requests:
         type: object
         description:
@@ -89,17 +51,7 @@ patternProperties:
 
         additionalProperties: true
 
-    required:
-      - interrupts
-      - qcom,smd-edge
-
-    oneOf:
-      - required:
-          - mboxes
-      - required:
-          - qcom,ipc
-
-    additionalProperties: false
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/drivers/hwspinlock/omap_hwspinlock.c b/drivers/hwspinlock/omap_hwspinlock.c
index 33eeff94fc2a..1fb3a2550e29 100644
--- a/drivers/hwspinlock/omap_hwspinlock.c
+++ b/drivers/hwspinlock/omap_hwspinlock.c
@@ -94,11 +94,9 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 	 * the module SYSSTATUS register
 	 */
 	pm_runtime_enable(&pdev->dev);
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0)
 		goto runtime_err;
-	}
 
 	/* Determine number of locks */
 	i = readl(io_base + SYSSTATUS_OFFSET);
diff --git a/drivers/hwspinlock/qcom_hwspinlock.c b/drivers/hwspinlock/qcom_hwspinlock.c
index 364710966665..80ea45b3a815 100644
--- a/drivers/hwspinlock/qcom_hwspinlock.c
+++ b/drivers/hwspinlock/qcom_hwspinlock.c
@@ -19,6 +19,11 @@
 #define QCOM_MUTEX_APPS_PROC_ID	1
 #define QCOM_MUTEX_NUM_LOCKS	32
 
+struct qcom_hwspinlock_of_data {
+	u32 offset;
+	u32 stride;
+};
+
 static int qcom_hwspinlock_trylock(struct hwspinlock *lock)
 {
 	struct regmap_field *field = lock->priv;
@@ -63,9 +68,20 @@ static const struct hwspinlock_ops qcom_hwspinlock_ops = {
 	.unlock		= qcom_hwspinlock_unlock,
 };
 
+static const struct qcom_hwspinlock_of_data of_sfpb_mutex = {
+	.offset = 0x4,
+	.stride = 0x4,
+};
+
+/* All modern platform has offset 0 and stride of 4k */
+static const struct qcom_hwspinlock_of_data of_tcsr_mutex = {
+	.offset = 0,
+	.stride = 0x1000,
+};
+
 static const struct of_device_id qcom_hwspinlock_of_match[] = {
-	{ .compatible = "qcom,sfpb-mutex" },
-	{ .compatible = "qcom,tcsr-mutex" },
+	{ .compatible = "qcom,sfpb-mutex", .data = &of_sfpb_mutex },
+	{ .compatible = "qcom,tcsr-mutex", .data = &of_tcsr_mutex },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_hwspinlock_of_match);
@@ -112,12 +128,14 @@ static const struct regmap_config tcsr_mutex_config = {
 static struct regmap *qcom_hwspinlock_probe_mmio(struct platform_device *pdev,
 						 u32 *offset, u32 *stride)
 {
+	const struct qcom_hwspinlock_of_data *data;
 	struct device *dev = &pdev->dev;
 	void __iomem *base;
 
-	/* All modern platform has offset 0 and stride of 4k */
-	*offset = 0;
-	*stride = 0x1000;
+	data = of_device_get_match_data(dev);
+
+	*offset = data->offset;
+	*stride = data->stride;
 
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 4a3352821b1d..38383e7de3c1 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -594,16 +594,17 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
 
 		node = of_parse_phandle(np, "memory-region", a);
 		/* Not map vdevbuffer, vdevring region */
-		if (!strncmp(node->name, "vdev", strlen("vdev")))
+		if (!strncmp(node->name, "vdev", strlen("vdev"))) {
+			of_node_put(node);
 			continue;
+		}
 		err = of_address_to_resource(node, 0, &res);
+		of_node_put(node);
 		if (err) {
 			dev_err(dev, "unable to resolve memory region\n");
 			return err;
 		}
 
-		of_node_put(node);
-
 		if (b >= IMX_RPROC_MEM_MAX)
 			break;
 
diff --git a/drivers/remoteproc/keystone_remoteproc.c b/drivers/remoteproc/keystone_remoteproc.c
index 54781f553f4e..594a9b43b7ae 100644
--- a/drivers/remoteproc/keystone_remoteproc.c
+++ b/drivers/remoteproc/keystone_remoteproc.c
@@ -410,10 +410,9 @@ static int keystone_rproc_probe(struct platform_device *pdev)
 
 	/* enable clock for accessing DSP internal memories */
 	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0) {
 		dev_err(dev, "failed to enable clock, status = %d\n", ret);
-		pm_runtime_put_noidle(dev);
 		goto disable_rpm;
 	}
 
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index 47b2a40e1b4a..d421a2ccaa1e 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -401,6 +401,14 @@ static int mt8186_scp_before_load(struct mtk_scp *scp)
 	writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_P1);
 	writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_p2);
 
+	/*
+	 * Set I-cache and D-cache size before loading SCP FW.
+	 * SCP SRAM logical address may change when cache size setting differs.
+	 */
+	writel(MT8183_SCP_CACHE_CON_WAYEN | MT8183_SCP_CACHESIZE_8KB,
+	       scp->reg_base + MT8183_SCP_CACHE_CON);
+	writel(MT8183_SCP_CACHESIZE_8KB, scp->reg_base + MT8183_SCP_DCACHE_CON);
+
 	return 0;
 }
 
@@ -943,7 +951,19 @@ static const struct mtk_scp_of_data mt8186_of_data = {
 	.scp_da_to_va = mt8183_scp_da_to_va,
 	.host_to_scp_reg = MT8183_HOST_TO_SCP,
 	.host_to_scp_int_bit = MT8183_HOST_IPC_INT_BIT,
-	.ipi_buf_offset = 0x7bdb0,
+	.ipi_buf_offset = 0x3bdb0,
+};
+
+static const struct mtk_scp_of_data mt8188_of_data = {
+	.scp_clk_get = mt8195_scp_clk_get,
+	.scp_before_load = mt8192_scp_before_load,
+	.scp_irq_handler = mt8192_scp_irq_handler,
+	.scp_reset_assert = mt8192_scp_reset_assert,
+	.scp_reset_deassert = mt8192_scp_reset_deassert,
+	.scp_stop = mt8192_scp_stop,
+	.scp_da_to_va = mt8192_scp_da_to_va,
+	.host_to_scp_reg = MT8192_GIPC_IN_SET,
+	.host_to_scp_int_bit = MT8192_HOST_IPC_INT_BIT,
 };
 
 static const struct mtk_scp_of_data mt8192_of_data = {
@@ -973,6 +993,7 @@ static const struct mtk_scp_of_data mt8195_of_data = {
 static const struct of_device_id mtk_scp_of_match[] = {
 	{ .compatible = "mediatek,mt8183-scp", .data = &mt8183_of_data },
 	{ .compatible = "mediatek,mt8186-scp", .data = &mt8186_of_data },
+	{ .compatible = "mediatek,mt8188-scp", .data = &mt8188_of_data },
 	{ .compatible = "mediatek,mt8192-scp", .data = &mt8192_of_data },
 	{ .compatible = "mediatek,mt8195-scp", .data = &mt8195_of_data },
 	{},
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index 32a588fefbdc..430fab0266ed 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -243,7 +243,7 @@ static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer)
  * omap_rproc_ack_timer_irq() - acknowledge a timer irq
  * @timer: handle to a OMAP rproc timer
  *
- * This function is used to clear the irq associated with a watchdog timer. The
+ * This function is used to clear the irq associated with a watchdog timer.
  * The function is called by the OMAP remoteproc upon a watchdog event on the
  * remote processor to clear the interrupt status of the watchdog timer.
  */
@@ -303,7 +303,7 @@ static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data)
  * @configure: boolean flag used to acquire and configure the timer handle
  *
  * This function is used primarily to enable the timers associated with
- * a remoteproc. The configure flag is provided to allow the driver to
+ * a remoteproc. The configure flag is provided to allow the driver
  * to either acquire and start a timer (during device initialization) or
  * to just start a timer (during a resume operation).
  *
@@ -443,7 +443,7 @@ free_timers:
  * @configure: boolean flag used to release the timer handle
  *
  * This function is used primarily to disable the timers associated with
- * a remoteproc. The configure flag is provided to allow the driver to
+ * a remoteproc. The configure flag is provided to allow the driver
  * to either stop and release a timer (during device shutdown) or to just
  * stop a timer (during a suspend operation).
  *
diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index 1777a01fa84e..128bf9912f2c 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -897,6 +897,7 @@ static const struct of_device_id pru_rproc_match[] = {
 	{ .compatible = "ti,j721e-pru",		.data = &k3_pru_data },
 	{ .compatible = "ti,j721e-rtu",		.data = &k3_rtu_data },
 	{ .compatible = "ti,j721e-tx-pru",	.data = &k3_tx_pru_data },
+	{ .compatible = "ti,am625-pru",		.data = &k3_pru_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, pru_rproc_match);
diff --git a/drivers/remoteproc/qcom_common.c b/drivers/remoteproc/qcom_common.c
index 4b91e3c9eafa..020349f8979d 100644
--- a/drivers/remoteproc/qcom_common.c
+++ b/drivers/remoteproc/qcom_common.c
@@ -50,7 +50,7 @@ struct minidump_region {
 };
 
 /**
- * struct minidump_subsystem_toc: Subsystem's SMEM Table of content
+ * struct minidump_subsystem - Subsystem's SMEM Table of content
  * @status : Subsystem toc init status
  * @enabled : if set to 1, this region would be copied during coredump
  * @encryption_status: Encryption status for this subsystem
@@ -68,7 +68,7 @@ struct minidump_subsystem {
 };
 
 /**
- * struct minidump_global_toc: Global Table of Content
+ * struct minidump_global_toc - Global Table of Content
  * @status : Global Minidump init status
  * @md_revision : Minidump revision
  * @enabled : Minidump enable status
diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
index 5280ec9b5449..497acfb33f8f 100644
--- a/drivers/remoteproc/qcom_q6v5.c
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -112,6 +112,7 @@ static irqreturn_t q6v5_wdog_interrupt(int irq, void *data)
 	else
 		dev_err(q6v5->dev, "watchdog without message\n");
 
+	q6v5->running = false;
 	rproc_report_crash(q6v5->rproc, RPROC_WATCHDOG);
 
 	return IRQ_HANDLED;
@@ -123,6 +124,9 @@ static irqreturn_t q6v5_fatal_interrupt(int irq, void *data)
 	size_t len;
 	char *msg;
 
+	if (!q6v5->running)
+		return IRQ_HANDLED;
+
 	msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, q6v5->crash_reason, &len);
 	if (!IS_ERR(msg) && len > 0 && msg[0])
 		dev_err(q6v5->dev, "fatal error received: %s\n", msg);
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 2f3b9f54251e..4c9a1b99cd51 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -175,9 +175,8 @@ static int qcom_rproc_pds_enable(struct qcom_adsp *adsp, struct device **pds,
 
 	for (i = 0; i < pd_count; i++) {
 		dev_pm_genpd_set_performance_state(pds[i], INT_MAX);
-		ret = pm_runtime_get_sync(pds[i]);
+		ret = pm_runtime_resume_and_get(pds[i]);
 		if (ret < 0) {
-			pm_runtime_put_noidle(pds[i]);
 			dev_pm_genpd_set_performance_state(pds[i], 0);
 			goto unroll_pd_votes;
 		}
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index af217de75e4d..fddb63cffee0 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -10,6 +10,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/devcoredump.h>
+#include <linux/dma-map-ops.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -932,27 +933,52 @@ static void q6v5proc_halt_axi_port(struct q6v5 *qproc,
 static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
 				const char *fw_name)
 {
-	unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
+	unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS | DMA_ATTR_NO_KERNEL_MAPPING;
+	unsigned long flags = VM_DMA_COHERENT | VM_FLUSH_RESET_PERMS;
+	struct page **pages;
+	struct page *page;
 	dma_addr_t phys;
 	void *metadata;
 	int mdata_perm;
 	int xferop_ret;
 	size_t size;
-	void *ptr;
+	void *vaddr;
+	int count;
 	int ret;
+	int i;
 
 	metadata = qcom_mdt_read_metadata(fw, &size, fw_name, qproc->dev);
 	if (IS_ERR(metadata))
 		return PTR_ERR(metadata);
 
-	ptr = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
-	if (!ptr) {
+	page = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
+	if (!page) {
 		kfree(metadata);
 		dev_err(qproc->dev, "failed to allocate mdt buffer\n");
 		return -ENOMEM;
 	}
 
-	memcpy(ptr, metadata, size);
+	count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+	pages = kmalloc_array(count, sizeof(struct page *), GFP_KERNEL);
+	if (!pages) {
+		ret = -ENOMEM;
+		goto free_dma_attrs;
+	}
+
+	for (i = 0; i < count; i++)
+		pages[i] = nth_page(page, i);
+
+	vaddr = vmap(pages, count, flags, pgprot_dmacoherent(PAGE_KERNEL));
+	kfree(pages);
+	if (!vaddr) {
+		dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", &phys, size);
+		ret = -EBUSY;
+		goto free_dma_attrs;
+	}
+
+	memcpy(vaddr, metadata, size);
+
+	vunmap(vaddr);
 
 	/* Hypervisor mapping to access metadata by modem */
 	mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
@@ -982,7 +1008,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
 			 "mdt buffer not reclaimed system may become unstable\n");
 
 free_dma_attrs:
-	dma_free_attrs(qproc->dev, size, ptr, phys, dma_attrs);
+	dma_free_attrs(qproc->dev, size, page, phys, dma_attrs);
 	kfree(metadata);
 
 	return ret < 0 ? ret : 0;
@@ -1102,6 +1128,9 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	if (ret)
 		goto reclaim_mba;
 
+	if (qproc->has_mba_logs)
+		qcom_pil_info_store("mba", qproc->mba_phys, MBA_LOG_SIZE);
+
 	ret = q6v5_rmb_mba_wait(qproc, 0, 5000);
 	if (ret == -ETIMEDOUT) {
 		dev_err(qproc->dev, "MBA boot timed out\n");
@@ -1594,11 +1623,19 @@ static int qcom_q6v5_register_dump_segments(struct rproc *rproc,
 	return ret;
 }
 
+static unsigned long q6v5_panic(struct rproc *rproc)
+{
+	struct q6v5 *qproc = (struct q6v5 *)rproc->priv;
+
+	return qcom_q6v5_panic(&qproc->q6v5);
+}
+
 static const struct rproc_ops q6v5_ops = {
 	.start = q6v5_start,
 	.stop = q6v5_stop,
 	.parse_fw = qcom_q6v5_register_dump_segments,
 	.load = q6v5_load,
+	.panic = q6v5_panic,
 };
 
 static void qcom_msa_handover(struct qcom_q6v5 *q6v5)
@@ -2188,6 +2225,11 @@ static const struct rproc_hexagon_res msm8996_mss = {
 			"mnoc_axi",
 			NULL
 	},
+	.proxy_pd_names = (char*[]){
+			"mx",
+			"cx",
+			NULL
+	},
 	.need_mem_protection = true,
 	.has_alt_reset = false,
 	.has_mba_logs = false,
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 6ae39c5653b1..98f133f9bb60 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -29,6 +30,8 @@
 #include "qcom_q6v5.h"
 #include "remoteproc_internal.h"
 
+#define ADSP_DECRYPT_SHUTDOWN_DELAY_MS	100
+
 struct adsp_data {
 	int crash_reason_smem;
 	const char *firmware_name;
@@ -36,6 +39,7 @@ struct adsp_data {
 	unsigned int minidump_id;
 	bool has_aggre2_clk;
 	bool auto_boot;
+	bool decrypt_shutdown;
 
 	char **proxy_pd_names;
 
@@ -65,6 +69,7 @@ struct qcom_adsp {
 	unsigned int minidump_id;
 	int crash_reason_smem;
 	bool has_aggre2_clk;
+	bool decrypt_shutdown;
 	const char *info_name;
 
 	struct completion start_done;
@@ -87,6 +92,9 @@ static void adsp_minidump(struct rproc *rproc)
 {
 	struct qcom_adsp *adsp = rproc->priv;
 
+	if (rproc->dump_conf == RPROC_COREDUMP_DISABLED)
+		return;
+
 	qcom_minidump(rproc, adsp->minidump_id);
 }
 
@@ -128,6 +136,19 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds,
 	}
 }
 
+static int adsp_shutdown_poll_decrypt(struct qcom_adsp *adsp)
+{
+	unsigned int retry_num = 50;
+	int ret;
+
+	do {
+		msleep(ADSP_DECRYPT_SHUTDOWN_DELAY_MS);
+		ret = qcom_scm_pas_shutdown(adsp->pas_id);
+	} while (ret == -EINVAL && --retry_num);
+
+	return ret;
+}
+
 static int adsp_unprepare(struct rproc *rproc)
 {
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
@@ -185,13 +206,17 @@ static int adsp_start(struct rproc *rproc)
 	if (ret)
 		goto disable_xo_clk;
 
-	ret = regulator_enable(adsp->cx_supply);
-	if (ret)
-		goto disable_aggre2_clk;
+	if (adsp->cx_supply) {
+		ret = regulator_enable(adsp->cx_supply);
+		if (ret)
+			goto disable_aggre2_clk;
+	}
 
-	ret = regulator_enable(adsp->px_supply);
-	if (ret)
-		goto disable_cx_supply;
+	if (adsp->px_supply) {
+		ret = regulator_enable(adsp->px_supply);
+		if (ret)
+			goto disable_cx_supply;
+	}
 
 	ret = qcom_scm_pas_auth_and_reset(adsp->pas_id);
 	if (ret) {
@@ -212,9 +237,11 @@ static int adsp_start(struct rproc *rproc)
 	return 0;
 
 disable_px_supply:
-	regulator_disable(adsp->px_supply);
+	if (adsp->px_supply)
+		regulator_disable(adsp->px_supply);
 disable_cx_supply:
-	regulator_disable(adsp->cx_supply);
+	if (adsp->cx_supply)
+		regulator_disable(adsp->cx_supply);
 disable_aggre2_clk:
 	clk_disable_unprepare(adsp->aggre2_clk);
 disable_xo_clk:
@@ -231,8 +258,10 @@ static void qcom_pas_handover(struct qcom_q6v5 *q6v5)
 {
 	struct qcom_adsp *adsp = container_of(q6v5, struct qcom_adsp, q6v5);
 
-	regulator_disable(adsp->px_supply);
-	regulator_disable(adsp->cx_supply);
+	if (adsp->px_supply)
+		regulator_disable(adsp->px_supply);
+	if (adsp->cx_supply)
+		regulator_disable(adsp->cx_supply);
 	clk_disable_unprepare(adsp->aggre2_clk);
 	clk_disable_unprepare(adsp->xo);
 	adsp_pds_disable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
@@ -249,6 +278,9 @@ static int adsp_stop(struct rproc *rproc)
 		dev_err(adsp->dev, "timed out on wait\n");
 
 	ret = qcom_scm_pas_shutdown(adsp->pas_id);
+	if (ret && adsp->decrypt_shutdown)
+		ret = adsp_shutdown_poll_decrypt(adsp);
+
 	if (ret)
 		dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
 
@@ -268,6 +300,9 @@ static void *adsp_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iom
 	if (offset < 0 || offset + len > adsp->mem_size)
 		return NULL;
 
+	if (is_iomem)
+		*is_iomem = true;
+
 	return adsp->mem_region + offset;
 }
 
@@ -326,13 +361,13 @@ static int adsp_init_clock(struct qcom_adsp *adsp)
 
 static int adsp_init_regulator(struct qcom_adsp *adsp)
 {
-	adsp->cx_supply = devm_regulator_get(adsp->dev, "cx");
+	adsp->cx_supply = devm_regulator_get_optional(adsp->dev, "cx");
 	if (IS_ERR(adsp->cx_supply))
 		return PTR_ERR(adsp->cx_supply);
 
 	regulator_set_load(adsp->cx_supply, 100000);
 
-	adsp->px_supply = devm_regulator_get(adsp->dev, "px");
+	adsp->px_supply = devm_regulator_get_optional(adsp->dev, "px");
 	return PTR_ERR_OR_ZERO(adsp->px_supply);
 }
 
@@ -459,9 +494,12 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp->pas_id = desc->pas_id;
 	adsp->has_aggre2_clk = desc->has_aggre2_clk;
 	adsp->info_name = desc->sysmon_name;
+	adsp->decrypt_shutdown = desc->decrypt_shutdown;
 	platform_set_drvdata(pdev, adsp);
 
-	device_wakeup_enable(adsp->dev);
+	ret = device_init_wakeup(adsp->dev, true);
+	if (ret)
+		goto free_rproc;
 
 	ret = adsp_alloc_memory_region(adsp);
 	if (ret)
@@ -877,6 +915,25 @@ static const struct adsp_data sdx55_mpss_resource = {
 	.ssctl_id = 0x22,
 };
 
+static const struct adsp_data sm8450_mpss_resource = {
+	.crash_reason_smem = 421,
+	.firmware_name = "modem.mdt",
+	.pas_id = 4,
+	.minidump_id = 3,
+	.has_aggre2_clk = false,
+	.auto_boot = false,
+	.decrypt_shutdown = true,
+	.proxy_pd_names = (char*[]){
+		"cx",
+		"mss",
+		NULL
+	},
+	.load_state = "modem",
+	.ssr_name = "mpss",
+	.sysmon_name = "modem",
+	.ssctl_id = 0x12,
+};
+
 static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,msm8226-adsp-pil", .data = &adsp_resource_init},
 	{ .compatible = "qcom,msm8974-adsp-pil", .data = &adsp_resource_init},
@@ -916,7 +973,7 @@ static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,sm8450-adsp-pas", .data = &sm8350_adsp_resource},
 	{ .compatible = "qcom,sm8450-cdsp-pas", .data = &sm8350_cdsp_resource},
 	{ .compatible = "qcom,sm8450-slpi-pas", .data = &sm8350_slpi_resource},
-	{ .compatible = "qcom,sm8450-mpss-pas", .data = &mpss_resource_init},
+	{ .compatible = "qcom,sm8450-mpss-pas", .data = &sm8450_mpss_resource},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, adsp_of_match);
diff --git a/drivers/remoteproc/qcom_sysmon.c b/drivers/remoteproc/qcom_sysmon.c
index 9fca81492863..57dde2a69b9d 100644
--- a/drivers/remoteproc/qcom_sysmon.c
+++ b/drivers/remoteproc/qcom_sysmon.c
@@ -41,6 +41,7 @@ struct qcom_sysmon {
 	struct completion comp;
 	struct completion ind_comp;
 	struct completion shutdown_comp;
+	struct completion ssctl_comp;
 	struct mutex lock;
 
 	bool ssr_ack;
@@ -445,6 +446,8 @@ static int ssctl_new_server(struct qmi_handle *qmi, struct qmi_service *svc)
 
 	svc->priv = sysmon;
 
+	complete(&sysmon->ssctl_comp);
+
 	return 0;
 }
 
@@ -501,6 +504,7 @@ static int sysmon_start(struct rproc_subdev *subdev)
 		.ssr_event = SSCTL_SSR_EVENT_AFTER_POWERUP
 	};
 
+	reinit_completion(&sysmon->ssctl_comp);
 	mutex_lock(&sysmon->state_lock);
 	sysmon->state = SSCTL_SSR_EVENT_AFTER_POWERUP;
 	blocking_notifier_call_chain(&sysmon_notifiers, 0, (void *)&event);
@@ -508,10 +512,12 @@ static int sysmon_start(struct rproc_subdev *subdev)
 
 	mutex_lock(&sysmon_lock);
 	list_for_each_entry(target, &sysmon_list, node) {
-		if (target == sysmon)
+		mutex_lock(&target->state_lock);
+		if (target == sysmon || target->state != SSCTL_SSR_EVENT_AFTER_POWERUP) {
+			mutex_unlock(&target->state_lock);
 			continue;
+		}
 
-		mutex_lock(&target->state_lock);
 		event.subsys_name = target->name;
 		event.ssr_event = target->state;
 
@@ -545,6 +551,11 @@ static void sysmon_stop(struct rproc_subdev *subdev, bool crashed)
 	if (crashed)
 		return;
 
+	if (sysmon->ssctl_instance) {
+		if (!wait_for_completion_timeout(&sysmon->ssctl_comp, HZ / 2))
+			dev_err(sysmon->dev, "timeout waiting for ssctl service\n");
+	}
+
 	if (sysmon->ssctl_version)
 		sysmon->shutdown_acked = ssctl_request_shutdown(sysmon);
 	else if (sysmon->ept)
@@ -631,6 +642,7 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 	init_completion(&sysmon->comp);
 	init_completion(&sysmon->ind_comp);
 	init_completion(&sysmon->shutdown_comp);
+	init_completion(&sysmon->ssctl_comp);
 	mutex_init(&sysmon->lock);
 	mutex_init(&sysmon->state_lock);
 
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 9a223d394087..68f37296b151 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -467,6 +467,7 @@ static int wcnss_request_irq(struct qcom_wcnss *wcnss,
 			     irq_handler_t thread_fn)
 {
 	int ret;
+	int irq_number;
 
 	ret = platform_get_irq_byname(pdev, name);
 	if (ret < 0 && optional) {
@@ -477,14 +478,19 @@ static int wcnss_request_irq(struct qcom_wcnss *wcnss,
 		return ret;
 	}
 
+	irq_number = ret;
+
 	ret = devm_request_threaded_irq(&pdev->dev, ret,
 					NULL, thread_fn,
 					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 					"wcnss", wcnss);
-	if (ret)
+	if (ret) {
 		dev_err(&pdev->dev, "request %s IRQ failed\n", name);
+		return ret;
+	}
 
-	return ret;
+	/* Return the IRQ number if the IRQ was successfully acquired */
+	return irq_number;
 }
 
 static int wcnss_alloc_memory_region(struct qcom_wcnss *wcnss)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 2d2f3bab5888..e5279ed9a8d7 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -59,6 +59,7 @@ static int rproc_release_carveout(struct rproc *rproc,
 
 /* Unique indices for remoteproc devices */
 static DEFINE_IDA(rproc_dev_index);
+static struct workqueue_struct *rproc_recovery_wq;
 
 static const char * const rproc_crash_names[] = {
 	[RPROC_MMUFAULT]	= "mmufault",
@@ -461,6 +462,7 @@ static void rproc_rvdev_release(struct device *dev)
 	struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev);
 
 	of_reserved_mem_device_release(dev);
+	dma_release_coherent_memory(dev);
 
 	kfree(rvdev);
 }
@@ -970,7 +972,7 @@ static int rproc_handle_carveout(struct rproc *rproc,
 		return 0;
 	}
 
-	/* Register carveout in in list */
+	/* Register carveout in list */
 	carveout = rproc_mem_entry_init(dev, NULL, 0, rsc->len, rsc->da,
 					rproc_alloc_carveout,
 					rproc_release_carveout, rsc->name);
@@ -2434,7 +2436,7 @@ static void rproc_type_release(struct device *dev)
 	idr_destroy(&rproc->notifyids);
 
 	if (rproc->index >= 0)
-		ida_simple_remove(&rproc_dev_index, rproc->index);
+		ida_free(&rproc_dev_index, rproc->index);
 
 	kfree_const(rproc->firmware);
 	kfree_const(rproc->name);
@@ -2551,9 +2553,9 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 		goto put_device;
 
 	/* Assign a unique device index and name */
-	rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL);
+	rproc->index = ida_alloc(&rproc_dev_index, GFP_KERNEL);
 	if (rproc->index < 0) {
-		dev_err(dev, "ida_simple_get failed: %d\n", rproc->index);
+		dev_err(dev, "ida_alloc failed: %d\n", rproc->index);
 		goto put_device;
 	}
 
@@ -2762,8 +2764,7 @@ void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type)
 	dev_err(&rproc->dev, "crash detected in %s: type %s\n",
 		rproc->name, rproc_crash_to_string(type));
 
-	/* Have a worker handle the error; ensure system is not suspended */
-	queue_work(system_freezable_wq, &rproc->crash_handler);
+	queue_work(rproc_recovery_wq, &rproc->crash_handler);
 }
 EXPORT_SYMBOL(rproc_report_crash);
 
@@ -2812,6 +2813,13 @@ static void __exit rproc_exit_panic(void)
 
 static int __init remoteproc_init(void)
 {
+	rproc_recovery_wq = alloc_workqueue("rproc_recovery_wq",
+						WQ_UNBOUND | WQ_FREEZABLE, 0);
+	if (!rproc_recovery_wq) {
+		pr_err("remoteproc: creation of rproc_recovery_wq failed\n");
+		return -ENOMEM;
+	}
+
 	rproc_init_sysfs();
 	rproc_init_debugfs();
 	rproc_init_cdev();
@@ -2825,9 +2833,13 @@ static void __exit remoteproc_exit(void)
 {
 	ida_destroy(&rproc_dev_index);
 
+	if (!rproc_recovery_wq)
+		return;
+
 	rproc_exit_panic();
 	rproc_exit_debugfs();
 	rproc_exit_sysfs();
+	destroy_workqueue(rproc_recovery_wq);
 }
 module_exit(remoteproc_exit);
 
diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c
index 4840ad906018..0481926c6975 100644
--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
@@ -1655,6 +1655,7 @@ static int k3_r5_cluster_of_init(struct platform_device *pdev)
 		if (!cpdev) {
 			ret = -ENODEV;
 			dev_err(dev, "could not get R5 core platform device\n");
+			of_node_put(child);
 			goto fail;
 		}
 
@@ -1663,6 +1664,7 @@ static int k3_r5_cluster_of_init(struct platform_device *pdev)
 			dev_err(dev, "k3_r5_core_of_init failed, ret = %d\n",
 				ret);
 			put_device(&cpdev->dev);
+			of_node_put(child);
 			goto fail;
 		}
 
diff --git a/drivers/rpmsg/mtk_rpmsg.c b/drivers/rpmsg/mtk_rpmsg.c
index 5b4404b8be4c..d1213c33da20 100644
--- a/drivers/rpmsg/mtk_rpmsg.c
+++ b/drivers/rpmsg/mtk_rpmsg.c
@@ -234,7 +234,9 @@ static void mtk_register_device_work_function(struct work_struct *register_work)
 		if (info->registered)
 			continue;
 
+		mutex_unlock(&subdev->channels_lock);
 		ret = mtk_rpmsg_register_device(subdev, &info->info);
+		mutex_lock(&subdev->channels_lock);
 		if (ret) {
 			dev_err(&pdev->dev, "Can't create rpmsg_device\n");
 			continue;
diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 07586514991f..115c0a1eddb1 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -98,8 +98,6 @@ struct glink_core_rx_intent {
 struct qcom_glink {
 	struct device *dev;
 
-	const char *name;
-
 	struct mbox_client mbox_client;
 	struct mbox_chan *mbox_chan;
 
@@ -1546,7 +1544,7 @@ static void qcom_glink_rx_close(struct qcom_glink *glink, unsigned int rcid)
 	cancel_work_sync(&channel->intent_work);
 
 	if (channel->rpdev) {
-		strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
+		strscpy_pad(chinfo.name, channel->name, sizeof(chinfo.name));
 		chinfo.src = RPMSG_ADDR_ANY;
 		chinfo.dst = RPMSG_ADDR_ANY;
 
@@ -1674,7 +1672,7 @@ static ssize_t rpmsg_name_show(struct device *dev,
 	if (ret < 0)
 		name = dev->of_node->name;
 
-	return snprintf(buf, RPMSG_NAME_SIZE, "%s\n", name);
+	return sysfs_emit(buf, "%s\n", name);
 }
 static DEVICE_ATTR_RO(rpmsg_name);
 
@@ -1755,10 +1753,6 @@ struct qcom_glink *qcom_glink_native_probe(struct device *dev,
 	if (ret)
 		dev_err(dev, "failed to add groups\n");
 
-	ret = of_property_read_string(dev->of_node, "label", &glink->name);
-	if (ret < 0)
-		glink->name = dev->of_node->name;
-
 	glink->mbox_client.dev = dev;
 	glink->mbox_client.knows_txdone = true;
 	glink->mbox_chan = mbox_request_channel(&glink->mbox_client, 0);
diff --git a/drivers/rpmsg/qcom_glink_ssr.c b/drivers/rpmsg/qcom_glink_ssr.c
index dea929c6045d..776d64446879 100644
--- a/drivers/rpmsg/qcom_glink_ssr.c
+++ b/drivers/rpmsg/qcom_glink_ssr.c
@@ -39,7 +39,7 @@ struct cleanup_done_msg {
 	__le32 seq_num;
 };
 
-/**
+/*
  * G-Link SSR protocol commands
  */
 #define GLINK_SSR_DO_CLEANUP	0
diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
index 1957b27c4cf3..1044cf03c542 100644
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -729,11 +729,11 @@ static int qcom_smd_write_fifo(struct qcom_smd_channel *channel,
 }
 
 /**
- * qcom_smd_send - write data to smd channel
+ * __qcom_smd_send - write data to smd channel
  * @channel:	channel handle
  * @data:	buffer of data to write
  * @len:	number of bytes to write
- * @wait:	flag to indicate if write has ca wait
+ * @wait:	flag to indicate if write can wait
  *
  * This is a blocking write of len bytes into the channel's tx ring buffer and
  * signal the remote end. It will sleep until there is enough space available
@@ -1089,7 +1089,7 @@ static int qcom_smd_create_device(struct qcom_smd_channel *channel)
 
 	/* Assign public information to the rpmsg_device */
 	rpdev = &qsdev->rpdev;
-	strncpy(rpdev->id.name, channel->name, RPMSG_NAME_SIZE);
+	strscpy_pad(rpdev->id.name, channel->name, RPMSG_NAME_SIZE);
 	rpdev->src = RPMSG_ADDR_ANY;
 	rpdev->dst = RPMSG_ADDR_ANY;
 
@@ -1323,7 +1323,7 @@ static void qcom_channel_state_worker(struct work_struct *work)
 
 		spin_unlock_irqrestore(&edge->channels_lock, flags);
 
-		strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
+		strscpy_pad(chinfo.name, channel->name, sizeof(chinfo.name));
 		chinfo.src = RPMSG_ADDR_ANY;
 		chinfo.dst = RPMSG_ADDR_ANY;
 		rpmsg_unregister_device(&edge->dev, &chinfo);
@@ -1383,6 +1383,7 @@ static int qcom_smd_parse_edge(struct device *dev,
 		}
 
 		edge->ipc_regmap = syscon_node_to_regmap(syscon_np);
+		of_node_put(syscon_np);
 		if (IS_ERR(edge->ipc_regmap)) {
 			ret = PTR_ERR(edge->ipc_regmap);
 			goto put_node;
diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index b6183d4f62a2..4f2189111494 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -120,8 +120,11 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
 	struct rpmsg_device *rpdev = eptdev->rpdev;
 	struct device *dev = &eptdev->dev;
 
-	if (eptdev->ept)
+	mutex_lock(&eptdev->ept_lock);
+	if (eptdev->ept) {
+		mutex_unlock(&eptdev->ept_lock);
 		return -EBUSY;
+	}
 
 	get_device(dev);
 
@@ -137,11 +140,13 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
 	if (!ept) {
 		dev_err(dev, "failed to open %s\n", eptdev->chinfo.name);
 		put_device(dev);
+		mutex_unlock(&eptdev->ept_lock);
 		return -EINVAL;
 	}
 
 	eptdev->ept = ept;
 	filp->private_data = eptdev;
+	mutex_unlock(&eptdev->ept_lock);
 
 	return 0;
 }
diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
index 290c1f02da10..d6dde00efdae 100644
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -604,7 +604,7 @@ int rpmsg_register_device_override(struct rpmsg_device *rpdev,
 	int ret;
 
 	if (driver_override)
-		strcpy(rpdev->id.name, driver_override);
+		strscpy_pad(rpdev->id.name, driver_override, RPMSG_NAME_SIZE);
 
 	dev_set_name(dev, "%s.%s.%d.%d", dev_name(dev->parent),
 		     rpdev->id.name, rpdev->src, rpdev->dst);
@@ -618,6 +618,7 @@ int rpmsg_register_device_override(struct rpmsg_device *rpdev,
 					  strlen(driver_override));
 		if (ret) {
 			dev_err(dev, "device_set_override failed: %d\n", ret);
+			put_device(dev);
 			return ret;
 		}
 	}
diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
index a22cd4abe7d1..39b646d0d40d 100644
--- a/drivers/rpmsg/rpmsg_internal.h
+++ b/drivers/rpmsg/rpmsg_internal.h
@@ -41,8 +41,8 @@ struct rpmsg_device_ops {
 					    rpmsg_rx_cb_t cb, void *priv,
 					    struct rpmsg_channel_info chinfo);
 
-	int (*announce_create)(struct rpmsg_device *ept);
-	int (*announce_destroy)(struct rpmsg_device *ept);
+	int (*announce_create)(struct rpmsg_device *rpdev);
+	int (*announce_destroy)(struct rpmsg_device *rpdev);
 };
 
 /**
diff --git a/include/linux/dma-map-ops.h b/include/linux/dma-map-ops.h
index 010df04358aa..d678afeb8a13 100644
--- a/include/linux/dma-map-ops.h
+++ b/include/linux/dma-map-ops.h
@@ -177,6 +177,7 @@ static inline void dma_pernuma_cma_reserve(void) { }
 #ifdef CONFIG_DMA_DECLARE_COHERENT
 int dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr,
 		dma_addr_t device_addr, size_t size);
+void dma_release_coherent_memory(struct device *dev);
 int dma_alloc_from_dev_coherent(struct device *dev, ssize_t size,
 		dma_addr_t *dma_handle, void **ret);
 int dma_release_from_dev_coherent(struct device *dev, int order, void *vaddr);
@@ -188,9 +189,11 @@ static inline int dma_declare_coherent_memory(struct device *dev,
 {
 	return -ENOSYS;
 }
+
 #define dma_alloc_from_dev_coherent(dev, size, handle, ret) (0)
 #define dma_release_from_dev_coherent(dev, order, vaddr) (0)
 #define dma_mmap_from_dev_coherent(dev, vma, vaddr, order, ret) (0)
+static inline void dma_release_coherent_memory(struct device *dev) { }
 #endif /* CONFIG_DMA_DECLARE_COHERENT */
 
 #ifdef CONFIG_DMA_GLOBAL_POOL
diff --git a/kernel/dma/coherent.c b/kernel/dma/coherent.c
index 375fb3c9538d..c21abc77c53e 100644
--- a/kernel/dma/coherent.c
+++ b/kernel/dma/coherent.c
@@ -74,7 +74,7 @@ out_unmap_membase:
 	return ERR_PTR(-ENOMEM);
 }
 
-static void dma_release_coherent_memory(struct dma_coherent_mem *mem)
+static void _dma_release_coherent_memory(struct dma_coherent_mem *mem)
 {
 	if (!mem)
 		return;
@@ -126,10 +126,16 @@ int dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr,
 
 	ret = dma_assign_coherent_memory(dev, mem);
 	if (ret)
-		dma_release_coherent_memory(mem);
+		_dma_release_coherent_memory(mem);
 	return ret;
 }
 
+void dma_release_coherent_memory(struct device *dev)
+{
+	if (dev)
+		_dma_release_coherent_memory(dev->dma_mem);
+}
+
 static void *__dma_alloc_from_coherent(struct device *dev,
 				       struct dma_coherent_mem *mem,
 				       ssize_t size, dma_addr_t *dma_handle)