Merge tag 'thermal-v6.5-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermalthermal-6.5-rc1

Pull thermal control updates for 6.5-rc1 from Daniel Lezcano:

"- Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms (Konrad
   Dybcio)

 - Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)

 - Add DT bindings for QCom ipq9574 (Praveenkumar I)

 - Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)

 - Allow selecting the bang-bang governor as default (Thierry Reding)

 - Refactor and prepare the code to set the scene for RCar Gen4
   (Wolfram Sang)

 - Cleanup and fixes for the QCom tsens drivers. Add DT bindings and
   calibration for the MSM8909 platform (Stephan Gerhold)

 - Revert a patch introducing a wrong usage of devm_of_iomap() on the
   Mediatek platform (Ricardo Cañuelo)

 - Fix the clock vs reset ordering in order to conform to the
   documentation on the sun8i (Christophe JAILLET)

 - Prevent setting up undocumented registers, enable the only described
   sensors and add the version 2.1 on the Qoriq sensor (Peng Fan)

 - Add DT bindings and support for the Armada AP807 (Alex Leibovich)

 - Update the mlx5 driver with the recent thermal changes (Daniel
   Lezcano)

 - Convert to platform remove callback returning void on STM32 (Uwe
   Kleine-König)

 - Add an error information printing for devm_thermal_add_hwmon_sysfs()
   and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
   Qoriq, Mediateka and QCom (Yangtao Li)

 - Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)

 - Use the dev_err_probe() function in the QCom tsens alarm driver
   (Luca Weiss)"

* tag 'thermal-v6.5-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (38 commits)
  thermal/drivers/qcom/temp-alarm: Use dev_err_probe
  thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
  thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start()
  thermal/drivers/qcom: Remove redundant msg at probe time
  thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()
  thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone()
  thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()
  drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
  thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()
  thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()
  thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
  thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()
  thermal/drivers/stm32: Convert to platform remove callback returning void
  net/mlx5: Update the driver with the recent thermal changes
  thermal/drivers/armada: Add support for AP807 thermal data
  dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
  thermal/drivers/qoriq: Support version 2.1
  thermal/drivers/qoriq: Only enable supported sensors
  thermal/drivers/qoriq: No need to program site adjustment register
  thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors
  ...

30 files changed, 415 insertions, 295 deletions

diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
index b0bee7e42038..ab8b8fccc7af 100644
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
@@ -8,6 +8,7 @@ Required properties:
     * marvell,armada380-thermal
     * marvell,armadaxp-thermal
     * marvell,armada-ap806-thermal
+    * marvell,armada-ap807-thermal
     * marvell,armada-cp110-thermal
 
 Note: these bindings are deprecated for AP806/CP110 and should instead
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
deleted file mode 100644
index a3e9ec5dc7ac..000000000000
--- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Binding for Thermal Sensor driver for BCM2835 SoCs.
-
-Required parameters:
--------------------
-
-compatible: 		should be one of: "brcm,bcm2835-thermal",
-			"brcm,bcm2836-thermal" or "brcm,bcm2837-thermal"
-reg:			Address range of the thermal registers.
-clocks: 		Phandle of the clock used by the thermal sensor.
-#thermal-sensor-cells:	should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
-
-Example:
-
-thermal-zones {
-	cpu_thermal: cpu-thermal {
-		polling-delay-passive = <0>;
-		polling-delay = <1000>;
-
-		thermal-sensors = <&thermal>;
-
-		trips {
-			cpu-crit {
-				temperature	= <80000>;
-				hysteresis	= <0>;
-				type		= "critical";
-			};
-		};
-
-		coefficients = <(-538)	407000>;
-
-		cooling-maps {
-		};
-	};
-};
-
-thermal: thermal@7e212000 {
-	compatible = "brcm,bcm2835-thermal";
-	reg = <0x7e212000 0x8>;
-	clocks = <&clocks BCM2835_CLOCK_TSENS>;
-	#thermal-sensor-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
new file mode 100644
index 000000000000..2b6026d9fbcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,bcm2835-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 thermal sensor
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-thermal
+      - brcm,bcm2836-thermal
+      - brcm,bcm2837-thermal
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#thermal-sensor-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    thermal@7e212000 {
+      compatible = "brcm,bcm2835-thermal";
+      reg = <0x7e212000 0x8>;
+      clocks = <&clocks BCM2835_CLOCK_TSENS>;
+      #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d1ec963a6834..27e9e16e6455 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -29,6 +29,8 @@ properties:
         items:
           - enum:
               - qcom,mdm9607-tsens
+              - qcom,msm8226-tsens
+              - qcom,msm8909-tsens
               - qcom,msm8916-tsens
               - qcom,msm8939-tsens
               - qcom,msm8974-tsens
@@ -48,6 +50,7 @@ properties:
               - qcom,msm8953-tsens
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
+              - qcom,qcm2290-tsens
               - qcom,sc7180-tsens
               - qcom,sc7280-tsens
               - qcom,sc8180x-tsens
@@ -56,6 +59,7 @@ properties:
               - qcom,sdm845-tsens
               - qcom,sm6115-tsens
               - qcom,sm6350-tsens
+              - qcom,sm6375-tsens
               - qcom,sm8150-tsens
               - qcom,sm8250-tsens
               - qcom,sm8350-tsens
@@ -67,6 +71,12 @@ properties:
         enum:
           - qcom,ipq8074-tsens
 
+      - description: v2 of TSENS with combined interrupt
+        items:
+          - enum:
+              - qcom,ipq9574-tsens
+          - const: qcom,ipq8074-tsens
+
   reg:
     items:
       - description: TM registers
@@ -223,12 +233,7 @@ allOf:
           contains:
             enum:
               - qcom,ipq8064-tsens
-              - qcom,mdm9607-tsens
-              - qcom,msm8916-tsens
               - qcom,msm8960-tsens
-              - qcom,msm8974-tsens
-              - qcom,msm8976-tsens
-              - qcom,qcs404-tsens
               - qcom,tsens-v0_1
               - qcom,tsens-v1
     then:
@@ -244,22 +249,7 @@ allOf:
       properties:
         compatible:
           contains:
-            enum:
-              - qcom,msm8953-tsens
-              - qcom,msm8996-tsens
-              - qcom,msm8998-tsens
-              - qcom,sc7180-tsens
-              - qcom,sc7280-tsens
-              - qcom,sc8180x-tsens
-              - qcom,sc8280xp-tsens
-              - qcom,sdm630-tsens
-              - qcom,sdm845-tsens
-              - qcom,sm6350-tsens
-              - qcom,sm8150-tsens
-              - qcom,sm8250-tsens
-              - qcom,sm8350-tsens
-              - qcom,sm8450-tsens
-              - qcom,tsens-v2
+            const: qcom,tsens-v2
     then:
       properties:
         interrupts:
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/thermal.c b/drivers/net/ethernet/mellanox/mlx5/core/thermal.c
index e47fa6fb836f..20bb5eb266c1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/thermal.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/thermal.c
@@ -45,7 +45,7 @@ static int mlx5_thermal_get_mtmp_temp(struct mlx5_core_dev *mdev, u32 id, int *p
 static int mlx5_thermal_get_temp(struct thermal_zone_device *tzdev,
 				 int *p_temp)
 {
-	struct mlx5_thermal *thermal = tzdev->devdata;
+	struct mlx5_thermal *thermal = thermal_zone_device_priv(tzdev);
 	struct mlx5_core_dev *mdev = thermal->mdev;
 	int err;
 
@@ -81,12 +81,13 @@ int mlx5_thermal_init(struct mlx5_core_dev *mdev)
 		return -ENOMEM;
 
 	thermal->mdev = mdev;
-	thermal->tzdev = thermal_zone_device_register(data,
-						      MLX5_THERMAL_NUM_TRIPS,
-						      MLX5_THERMAL_TRIP_MASK,
-						      thermal,
-						      &mlx5_thermal_ops,
-						      NULL, 0, MLX5_THERMAL_POLL_INT_MSEC);
+	thermal->tzdev = thermal_zone_device_register_with_trips(data,
+								 NULL,
+								 MLX5_THERMAL_NUM_TRIPS,
+								 MLX5_THERMAL_TRIP_MASK,
+								 thermal,
+								 &mlx5_thermal_ops,
+								 NULL, 0, MLX5_THERMAL_POLL_INT_MSEC);
 	if (IS_ERR(thermal->tzdev)) {
 		dev_err(mdev->device, "Failed to register thermal zone device (%s) %ld\n",
 			data, PTR_ERR(thermal->tzdev));
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 4cd7ab707315..19a4b33cb564 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -130,6 +130,14 @@ config THERMAL_DEFAULT_GOV_POWER_ALLOCATOR
 	  system and device power allocation. This governor can only
 	  operate on cooling devices that implement the power API.
 
+config THERMAL_DEFAULT_GOV_BANG_BANG
+	bool "bang_bang"
+	depends on THERMAL_GOV_BANG_BANG
+	help
+	  Use the bang_bang governor as default. This throttles the
+	  devices one step at the time, taking into account the trip
+	  point hysteresis.
+
 endchoice
 
 config THERMAL_GOV_FAIR_SHARE
diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index 3abc2dcef408..756b218880a7 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -282,8 +282,7 @@ static int amlogic_thermal_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (devm_thermal_add_hwmon_sysfs(&pdev->dev, pdata->tzd))
-		dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
+	devm_thermal_add_hwmon_sysfs(&pdev->dev, pdata->tzd);
 
 	ret = amlogic_thermal_initialize(pdata);
 	if (ret)
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 0e8dfa6a7757..9f6dc4fc9112 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -231,7 +231,7 @@ static void armada380_init(struct platform_device *pdev,
 	regmap_write(priv->syscon, data->syscon_control0_off, reg);
 }
 
-static void armada_ap806_init(struct platform_device *pdev,
+static void armada_ap80x_init(struct platform_device *pdev,
 			      struct armada_thermal_priv *priv)
 {
 	struct armada_thermal_data *data = priv->data;
@@ -614,7 +614,7 @@ static const struct armada_thermal_data armada380_data = {
 };
 
 static const struct armada_thermal_data armada_ap806_data = {
-	.init = armada_ap806_init,
+	.init = armada_ap80x_init,
 	.is_valid_bit = BIT(16),
 	.temp_shift = 0,
 	.temp_mask = 0x3ff,
@@ -637,6 +637,30 @@ static const struct armada_thermal_data armada_ap806_data = {
 	.cpu_nr = 4,
 };
 
+static const struct armada_thermal_data armada_ap807_data = {
+	.init = armada_ap80x_init,
+	.is_valid_bit = BIT(16),
+	.temp_shift = 0,
+	.temp_mask = 0x3ff,
+	.thresh_shift = 3,
+	.hyst_shift = 19,
+	.hyst_mask = 0x3,
+	.coef_b = -128900LL,
+	.coef_m = 394ULL,
+	.coef_div = 1,
+	.inverted = true,
+	.signed_sample = true,
+	.syscon_control0_off = 0x84,
+	.syscon_control1_off = 0x88,
+	.syscon_status_off = 0x8C,
+	.dfx_irq_cause_off = 0x108,
+	.dfx_irq_mask_off = 0x10C,
+	.dfx_overheat_irq = BIT(22),
+	.dfx_server_irq_mask_off = 0x104,
+	.dfx_server_irq_en = BIT(1),
+	.cpu_nr = 4,
+};
+
 static const struct armada_thermal_data armada_cp110_data = {
 	.init = armada_cp110_init,
 	.is_valid_bit = BIT(10),
@@ -681,6 +705,10 @@ static const struct of_device_id armada_thermal_id_table[] = {
 		.data       = &armada_ap806_data,
 	},
 	{
+		.compatible = "marvell,armada-ap807-thermal",
+		.data       = &armada_ap807_data,
+	},
+	{
 		.compatible = "marvell,armada-cp110-thermal",
 		.data       = &armada_cp110_data,
 	},
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index d8005e9ec992..d4b40869c7d7 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -343,8 +343,7 @@ static int imx8mm_tmu_probe(struct platform_device *pdev)
 		}
 		tmu->sensors[i].hw_id = i;
 
-		if (devm_thermal_add_hwmon_sysfs(&pdev->dev, tmu->sensors[i].tzd))
-			dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
+		devm_thermal_add_hwmon_sysfs(&pdev->dev, tmu->sensors[i].tzd);
 	}
 
 	platform_set_drvdata(pdev, tmu);
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index 839bb9958f60..8d6b4ef23746 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -116,8 +116,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 			return ret;
 		}
 
-		if (devm_thermal_add_hwmon_sysfs(&pdev->dev, sensor->tzd))
-			dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
+		devm_thermal_add_hwmon_sysfs(&pdev->dev, sensor->tzd);
 	}
 
 	return 0;
diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c
index 791210458606..1c3e590157ec 100644
--- a/drivers/thermal/k3_bandgap.c
+++ b/drivers/thermal/k3_bandgap.c
@@ -222,8 +222,7 @@ static int k3_bandgap_probe(struct platform_device *pdev)
 			goto err_alloc;
 		}
 
-		if (devm_thermal_add_hwmon_sysfs(dev, data[id].tzd))
-			dev_warn(dev, "Failed to add hwmon sysfs attributes\n");
+		devm_thermal_add_hwmon_sysfs(dev, data[id].tzd);
 	}
 
 	platform_set_drvdata(pdev, bgp);
diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
index 0b5528804bbd..f59d36de20a0 100644
--- a/drivers/thermal/mediatek/auxadc_thermal.c
+++ b/drivers/thermal/mediatek/auxadc_thermal.c
@@ -1222,12 +1222,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	auxadc_base = devm_of_iomap(&pdev->dev, auxadc, 0, NULL);
-	if (IS_ERR(auxadc_base)) {
-		of_node_put(auxadc);
-		return PTR_ERR(auxadc_base);
-	}
-
+	auxadc_base = of_iomap(auxadc, 0);
 	auxadc_phys_base = of_get_phys_base(auxadc);
 
 	of_node_put(auxadc);
@@ -1243,12 +1238,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	apmixed_base = devm_of_iomap(&pdev->dev, apmixedsys, 0, NULL);
-	if (IS_ERR(apmixed_base)) {
-		of_node_put(apmixedsys);
-		return PTR_ERR(apmixed_base);
-	}
-
+	apmixed_base = of_iomap(apmixedsys, 0);
 	apmixed_phys_base = of_get_phys_base(apmixedsys);
 
 	of_node_put(apmixedsys);
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index d0a3f95b7884..b693fac2d677 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -19,6 +19,8 @@
 #include <linux/thermal.h>
 #include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
+#include "../thermal_hwmon.h"
+
 #define LVTS_MONCTL0(__base)	(__base + 0x0000)
 #define LVTS_MONCTL1(__base)	(__base + 0x0004)
 #define LVTS_MONCTL2(__base)	(__base + 0x0008)
@@ -996,6 +998,8 @@ static int lvts_ctrl_start(struct device *dev, struct lvts_ctrl *lvts_ctrl)
 			return PTR_ERR(tz);
 		}
 
+		devm_thermal_add_hwmon_sysfs(dev, tz);
+
 		/*
 		 * The thermal zone pointer will be needed in the
 		 * interrupt handler, we store it in the sensor
diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
index 5749149ae2e4..5ddc39b2be32 100644
--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -689,9 +689,7 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
 			return PTR_ERR(tzd);
 		}
 		adc_tm->channels[i].tzd = tzd;
-		if (devm_thermal_add_hwmon_sysfs(adc_tm->dev, tzd))
-			dev_warn(adc_tm->dev,
-				 "Failed to add hwmon sysfs attributes\n");
+		devm_thermal_add_hwmon_sysfs(adc_tm->dev, tzd);
 	}
 
 	return 0;
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index 0f88e98428ac..0e8ebfcd84c5 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -411,22 +411,19 @@ static int qpnp_tm_probe(struct platform_device *pdev)
 	chip->base = res;
 
 	ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "could not read type\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "could not read type\n");
 
 	ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "could not read subtype\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "could not read subtype\n");
 
 	ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "could not read dig_major\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "could not read dig_major\n");
 
 	if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
 				     && subtype != QPNP_TM_SUBTYPE_GEN2)) {
@@ -448,20 +445,15 @@ static int qpnp_tm_probe(struct platform_device *pdev)
 	 */
 	chip->tz_dev = devm_thermal_of_zone_register(
 		&pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
-	if (IS_ERR(chip->tz_dev)) {
-		dev_err(&pdev->dev, "failed to register sensor\n");
-		return PTR_ERR(chip->tz_dev);
-	}
+	if (IS_ERR(chip->tz_dev))
+		return dev_err_probe(&pdev->dev, PTR_ERR(chip->tz_dev),
+				     "failed to register sensor\n");
 
 	ret = qpnp_tm_init(chip);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "init failed\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "init failed\n");
 
-	if (devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev))
-		dev_warn(&pdev->dev,
-			 "Failed to add hwmon sysfs attributes\n");
+	devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev);
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr,
 					IRQF_ONESHOT, node->name, chip);
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index e89c6f39a3ae..a941b4241b0a 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -39,26 +39,6 @@ struct tsens_legacy_calibration_format tsens_8916_nvmem = {
 	},
 };
 
-struct tsens_legacy_calibration_format tsens_8939_nvmem = {
-	.base_len = 8,
-	.base_shift = 2,
-	.sp_len = 6,
-	.mode = { 12, 0 },
-	.invalid = { 12, 2 },
-	.base = { { 0, 0 }, { 1, 24 } },
-	.sp = {
-		{ { 12, 3 },  { 12, 9 } },
-		{ { 12, 15 }, { 12, 21 } },
-		{ { 12, 27 }, { 13, 1 } },
-		{ { 13, 7 },  { 13, 13 } },
-		{ { 13, 19 }, { 13, 25 } },
-		{ { 0, 8 },   { 0, 14 } },
-		{ { 0, 20 },  { 0, 26 } },
-		{ { 1, 0 },   { 1, 6 } },
-		{ { 1, 12 },  { 1, 18 } },
-	},
-};
-
 struct tsens_legacy_calibration_format tsens_8974_nvmem = {
 	.base_len = 8,
 	.base_shift = 2,
@@ -103,22 +83,6 @@ struct tsens_legacy_calibration_format tsens_8974_backup_nvmem = {
 	},
 };
 
-struct tsens_legacy_calibration_format tsens_9607_nvmem = {
-	.base_len = 8,
-	.base_shift = 2,
-	.sp_len = 6,
-	.mode = { 2, 20 },
-	.invalid = { 2, 22 },
-	.base = { { 0, 0 }, { 2, 12 } },
-	.sp = {
-		{ { 0, 8 },  { 0, 14 } },
-		{ { 0, 20 }, { 0, 26 } },
-		{ { 1, 0 },  { 1, 6 } },
-		{ { 1, 12 }, { 1, 18 } },
-		{ { 2, 0 },  { 2, 6 } },
-	},
-};
-
 static int calibrate_8916(struct tsens_priv *priv)
 {
 	u32 p1[5], p2[5];
@@ -243,6 +207,39 @@ static int calibrate_8974(struct tsens_priv *priv)
 	return 0;
 }
 
+static int __init init_8226(struct tsens_priv *priv)
+{
+	priv->sensor[0].slope = 2901;
+	priv->sensor[1].slope = 2846;
+	priv->sensor[2].slope = 3038;
+	priv->sensor[3].slope = 2955;
+	priv->sensor[4].slope = 2901;
+	priv->sensor[5].slope = 2846;
+
+	return init_common(priv);
+}
+
+static int __init init_8909(struct tsens_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < priv->num_sensors; ++i)
+		priv->sensor[i].slope = 3000;
+
+	priv->sensor[0].p1_calib_offset = 0;
+	priv->sensor[0].p2_calib_offset = 0;
+	priv->sensor[1].p1_calib_offset = -10;
+	priv->sensor[1].p2_calib_offset = -6;
+	priv->sensor[2].p1_calib_offset = 0;
+	priv->sensor[2].p2_calib_offset = 0;
+	priv->sensor[3].p1_calib_offset = -9;
+	priv->sensor[3].p2_calib_offset = -9;
+	priv->sensor[4].p1_calib_offset = -8;
+	priv->sensor[4].p2_calib_offset = -10;
+
+	return init_common(priv);
+}
+
 static int __init init_8939(struct tsens_priv *priv) {
 	priv->sensor[0].slope = 2911;
 	priv->sensor[1].slope = 2789;
@@ -258,7 +255,28 @@ static int __init init_8939(struct tsens_priv *priv) {
 	return init_common(priv);
 }
 
-/* v0.1: 8916, 8939, 8974, 9607 */
+static int __init init_9607(struct tsens_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < priv->num_sensors; ++i)
+		priv->sensor[i].slope = 3000;
+
+	priv->sensor[0].p1_calib_offset = 1;
+	priv->sensor[0].p2_calib_offset = 1;
+	priv->sensor[1].p1_calib_offset = -4;
+	priv->sensor[1].p2_calib_offset = -2;
+	priv->sensor[2].p1_calib_offset = 4;
+	priv->sensor[2].p2_calib_offset = 8;
+	priv->sensor[3].p1_calib_offset = -3;
+	priv->sensor[3].p2_calib_offset = -5;
+	priv->sensor[4].p1_calib_offset = -4;
+	priv->sensor[4].p2_calib_offset = -4;
+
+	return init_common(priv);
+}
+
+/* v0.1: 8226, 8909, 8916, 8939, 8974, 9607 */
 
 static struct tsens_features tsens_v0_1_feat = {
 	.ver_major	= VER_0_1,
@@ -313,6 +331,32 @@ static const struct tsens_ops ops_v0_1 = {
 	.get_temp	= get_temp_common,
 };
 
+static const struct tsens_ops ops_8226 = {
+	.init		= init_8226,
+	.calibrate	= tsens_calibrate_common,
+	.get_temp	= get_temp_common,
+};
+
+struct tsens_plat_data data_8226 = {
+	.num_sensors	= 6,
+	.ops		= &ops_8226,
+	.feat		= &tsens_v0_1_feat,
+	.fields	= tsens_v0_1_regfields,
+};
+
+static const struct tsens_ops ops_8909 = {
+	.init		= init_8909,
+	.calibrate	= tsens_calibrate_common,
+	.get_temp	= get_temp_common,
+};
+
+struct tsens_plat_data data_8909 = {
+	.num_sensors	= 5,
+	.ops		= &ops_8909,
+	.feat		= &tsens_v0_1_feat,
+	.fields	= tsens_v0_1_regfields,
+};
+
 static const struct tsens_ops ops_8916 = {
 	.init		= init_common,
 	.calibrate	= calibrate_8916,
@@ -356,9 +400,15 @@ struct tsens_plat_data data_8974 = {
 	.fields	= tsens_v0_1_regfields,
 };
 
+static const struct tsens_ops ops_9607 = {
+	.init		= init_9607,
+	.calibrate	= tsens_calibrate_common,
+	.get_temp	= get_temp_common,
+};
+
 struct tsens_plat_data data_9607 = {
 	.num_sensors	= 5,
-	.ops		= &ops_v0_1,
+	.ops		= &ops_9607,
 	.feat		= &tsens_v0_1_feat,
 	.fields	= tsens_v0_1_regfields,
 };
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index b822a426066d..51322430f1fe 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -42,28 +42,6 @@ struct tsens_legacy_calibration_format tsens_qcs404_nvmem = {
 	},
 };
 
-struct tsens_legacy_calibration_format tsens_8976_nvmem = {
-	.base_len = 8,
-	.base_shift = 2,
-	.sp_len = 6,
-	.mode = { 4, 0 },
-	.invalid = { 4, 2 },
-	.base = { { 0, 0 }, { 2, 8 } },
-	.sp = {
-		{ { 0, 8 },  { 0, 14 } },
-		{ { 0, 20 }, { 0, 26 } },
-		{ { 1, 0 },  { 1, 6 } },
-		{ { 1, 12 }, { 1, 18 } },
-		{ { 2, 8 },  { 2, 14 } },
-		{ { 2, 20 }, { 2, 26 } },
-		{ { 3, 0 },  { 3, 6 } },
-		{ { 3, 12 }, { 3, 18 } },
-		{ { 4, 2 },  { 4, 9 } },
-		{ { 4, 14 }, { 4, 21 } },
-		{ { 4, 26 }, { 5, 1 } },
-	},
-};
-
 static int calibrate_v1(struct tsens_priv *priv)
 {
 	u32 p1[10], p2[10];
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index d3218127e617..98c356acfe98 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -134,10 +134,12 @@ int tsens_read_calibration(struct tsens_priv *priv, int shift, u32 *p1, u32 *p2,
 			p1[i] = p1[i] + (base1 << shift);
 		break;
 	case TWO_PT_CALIB:
+	case TWO_PT_CALIB_NO_OFFSET:
 		for (i = 0; i < priv->num_sensors; i++)
 			p2[i] = (p2[i] + base2) << shift;
 		fallthrough;
 	case ONE_PT_CALIB2:
+	case ONE_PT_CALIB2_NO_OFFSET:
 		for (i = 0; i < priv->num_sensors; i++)
 			p1[i] = (p1[i] + base1) << shift;
 		break;
@@ -149,6 +151,18 @@ int tsens_read_calibration(struct tsens_priv *priv, int shift, u32 *p1, u32 *p2,
 		}
 	}
 
+	/* Apply calibration offset workaround except for _NO_OFFSET modes */
+	switch (mode) {
+	case TWO_PT_CALIB:
+		for (i = 0; i < priv->num_sensors; i++)
+			p2[i] += priv->sensor[i].p2_calib_offset;
+		fallthrough;
+	case ONE_PT_CALIB2:
+		for (i = 0; i < priv->num_sensors; i++)
+			p1[i] += priv->sensor[i].p1_calib_offset;
+		break;
+	}
+
 	return mode;
 }
 
@@ -254,7 +268,7 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
 
 		if (!priv->sensor[i].slope)
 			priv->sensor[i].slope = SLOPE_DEFAULT;
-		if (mode == TWO_PT_CALIB) {
+		if (mode == TWO_PT_CALIB || mode == TWO_PT_CALIB_NO_OFFSET) {
 			/*
 			 * slope (m) = adc_code2 - adc_code1 (y2 - y1)/
 			 *	temp_120_degc - temp_30_degc (x2 - x1)
@@ -1096,6 +1110,12 @@ static const struct of_device_id tsens_table[] = {
 		.compatible = "qcom,mdm9607-tsens",
 		.data = &data_9607,
 	}, {
+		.compatible = "qcom,msm8226-tsens",
+		.data = &data_8226,
+	}, {
+		.compatible = "qcom,msm8909-tsens",
+		.data = &data_8909,
+	}, {
 		.compatible = "qcom,msm8916-tsens",
 		.data = &data_8916,
 	}, {
@@ -1189,9 +1209,7 @@ static int tsens_register(struct tsens_priv *priv)
 		if (priv->ops->enable)
 			priv->ops->enable(priv, i);
 
-		if (devm_thermal_add_hwmon_sysfs(priv->dev, tzd))
-			dev_warn(priv->dev,
-				 "Failed to add hwmon sysfs attributes\n");
+		devm_thermal_add_hwmon_sysfs(priv->dev, tzd);
 	}
 
 	/* VER_0 require to set MIN and MAX THRESH
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index dba9cd38f637..2805de1c6827 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -10,6 +10,8 @@
 #define ONE_PT_CALIB		0x1
 #define ONE_PT_CALIB2		0x2
 #define TWO_PT_CALIB		0x3
+#define ONE_PT_CALIB2_NO_OFFSET	0x6
+#define TWO_PT_CALIB_NO_OFFSET	0x7
 #define CAL_DEGC_PT1		30
 #define CAL_DEGC_PT2		120
 #define SLOPE_FACTOR		1000
@@ -57,6 +59,8 @@ struct tsens_sensor {
 	unsigned int			hw_id;
 	int				slope;
 	u32				status;
+	int				p1_calib_offset;
+	int				p2_calib_offset;
 };
 
 /**
@@ -635,7 +639,7 @@ int get_temp_common(const struct tsens_sensor *s, int *temp);
 extern struct tsens_plat_data data_8960;
 
 /* TSENS v0.1 targets */
-extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607;
+extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8974, data_9607;
 
 /* TSENS v1 targets */
 extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index e58756323457..ccc2eea7f9f5 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -31,7 +31,6 @@
 #define TMR_DISABLE	0x0
 #define TMR_ME		0x80000000
 #define TMR_ALPF	0x0c000000
-#define TMR_MSITE_ALL	GENMASK(15, 0)
 
 #define REGS_TMTMIR	0x008	/* Temperature measurement interval Register */
 #define TMTMIR_DEFAULT	0x0000000f
@@ -51,6 +50,7 @@
 					    * Site Register
 					    */
 #define TRITSR_V	BIT(31)
+#define TRITSR_TP5	BIT(9)
 #define REGS_V2_TMSAR(n)	(0x304 + 16 * (n))	/* TMU monitoring
 						* site adjustment register
 						*/
@@ -105,6 +105,11 @@ static int tmu_get_temp(struct thermal_zone_device *tz, int *temp)
 	 * within sensor range. TEMP is an 9 bit value representing
 	 * temperature in KelVin.
 	 */
+
+	regmap_read(qdata->regmap, REGS_TMR, &val);
+	if (!(val & TMR_ME))
+		return -EAGAIN;
+
 	if (regmap_read_poll_timeout(qdata->regmap,
 				     REGS_TRITSR(qsensor->id),
 				     val,
@@ -113,10 +118,15 @@ static int tmu_get_temp(struct thermal_zone_device *tz, int *temp)
 				     10 * USEC_PER_MSEC))
 		return -ENODATA;
 
-	if (qdata->ver == TMU_VER1)
+	if (qdata->ver == TMU_VER1) {
 		*temp = (val & GENMASK(7, 0)) * MILLIDEGREE_PER_DEGREE;
-	else
-		*temp = kelvin_to_millicelsius(val & GENMASK(8, 0));
+	} else {
+		if (val & TRITSR_TP5)
+			*temp = milli_kelvin_to_millicelsius((val & GENMASK(8, 0)) *
+							     MILLIDEGREE_PER_DEGREE + 500);
+		else
+			*temp = kelvin_to_millicelsius(val & GENMASK(8, 0));
+	}
 
 	return 0;
 }
@@ -128,15 +138,7 @@ static const struct thermal_zone_device_ops tmu_tz_ops = {
 static int qoriq_tmu_register_tmu_zone(struct device *dev,
 				       struct qoriq_tmu_data *qdata)
 {
-	int id;
-
-	if (qdata->ver == TMU_VER1) {
-		regmap_write(qdata->regmap, REGS_TMR,
-			     TMR_MSITE_ALL | TMR_ME | TMR_ALPF);
-	} else {
-		regmap_write(qdata->regmap, REGS_V2_TMSR, TMR_MSITE_ALL);
-		regmap_write(qdata->regmap, REGS_TMR, TMR_ME | TMR_ALPF_V2);
-	}
+	int id, sites = 0;
 
 	for (id = 0; id < SITES_MAX; id++) {
 		struct thermal_zone_device *tzd;
@@ -153,14 +155,24 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 			if (ret == -ENODEV)
 				continue;
 
-			regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE);
 			return ret;
 		}
 
-		if (devm_thermal_add_hwmon_sysfs(dev, tzd))
-			dev_warn(dev,
-				 "Failed to add hwmon sysfs attributes\n");
+		if (qdata->ver == TMU_VER1)
+			sites |= 0x1 << (15 - id);
+		else
+			sites |= 0x1 << id;
+
+		devm_thermal_add_hwmon_sysfs(dev, tzd);
+	}
 
+	if (sites) {
+		if (qdata->ver == TMU_VER1) {
+			regmap_write(qdata->regmap, REGS_TMR, TMR_ME | TMR_ALPF | sites);
+		} else {
+			regmap_write(qdata->regmap, REGS_V2_TMSR, sites);
+			regmap_write(qdata->regmap, REGS_TMR, TMR_ME | TMR_ALPF_V2);
+		}
 	}
 
 	return 0;
@@ -208,8 +220,6 @@ static int qoriq_tmu_calibration(struct device *dev,
 
 static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
 {
-	int i;
-
 	/* Disable interrupt, using polling instead */
 	regmap_write(data->regmap, REGS_TIER, TIER_DISABLE);
 
@@ -220,8 +230,6 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
 	} else {
 		regmap_write(data->regmap, REGS_V2_TMTMIR, TMTMIR_DEFAULT);
 		regmap_write(data->regmap, REGS_V2_TEUMR(0), TEUMR0_V2);
-		for (i = 0; i < SITES_MAX; i++)
-			regmap_write(data->regmap, REGS_V2_TMSAR(i), TMSARA_V2);
 	}
 
 	/* Disable monitoring */
@@ -230,7 +238,7 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
 
 static const struct regmap_range qoriq_yes_ranges[] = {
 	regmap_reg_range(REGS_TMR, REGS_TSCFGR),
-	regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)),
+	regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(15)),
 	regmap_reg_range(REGS_V2_TEUMR(0), REGS_V2_TEUMR(2)),
 	regmap_reg_range(REGS_V2_TMSAR(0), REGS_V2_TMSAR(15)),
 	regmap_reg_range(REGS_IPBRR(0), REGS_IPBRR(1)),
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 42a4724d3920..9029d01e029b 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -35,6 +35,12 @@
 #define REG_GEN3_PTAT2		0x60
 #define REG_GEN3_PTAT3		0x64
 #define REG_GEN3_THSCP		0x68
+#define REG_GEN4_THSFMON00	0x180
+#define REG_GEN4_THSFMON01	0x184
+#define REG_GEN4_THSFMON02	0x188
+#define REG_GEN4_THSFMON15	0x1BC
+#define REG_GEN4_THSFMON16	0x1C0
+#define REG_GEN4_THSFMON17	0x1C4
 
 /* IRQ{STR,MSK,EN} bits */
 #define IRQ_TEMP1		BIT(0)
@@ -55,6 +61,7 @@
 
 #define MCELSIUS(temp)	((temp) * 1000)
 #define GEN3_FUSE_MASK	0xFFF
+#define GEN4_FUSE_MASK	0xFFF
 
 #define TSC_MAX_NUM	5
 
@@ -66,6 +73,13 @@ struct equation_coefs {
 	int b2;
 };
 
+struct rcar_gen3_thermal_priv;
+
+struct rcar_thermal_info {
+	int ths_tj_1;
+	void (*read_fuses)(struct rcar_gen3_thermal_priv *priv);
+};
+
 struct rcar_gen3_thermal_tsc {
 	void __iomem *base;
 	struct thermal_zone_device *zone;
@@ -79,6 +93,7 @@ struct rcar_gen3_thermal_priv {
 	struct thermal_zone_device_ops ops;
 	unsigned int num_tscs;
 	int ptat[3];
+	const struct rcar_thermal_info *info;
 };
 
 static inline u32 rcar_gen3_thermal_read(struct rcar_gen3_thermal_tsc *tsc,
@@ -236,6 +251,62 @@ static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static void rcar_gen3_thermal_read_fuses_gen3(struct rcar_gen3_thermal_priv *priv)
+{
+	unsigned int i;
+
+	/*
+	 * Set the pseudo calibration points with fused values.
+	 * PTAT is shared between all TSCs but only fused for the first
+	 * TSC while THCODEs are fused for each TSC.
+	 */
+	priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT1) &
+		GEN3_FUSE_MASK;
+	priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT2) &
+		GEN3_FUSE_MASK;
+	priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT3) &
+		GEN3_FUSE_MASK;
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+		tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE1) &
+			GEN3_FUSE_MASK;
+		tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE2) &
+			GEN3_FUSE_MASK;
+		tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE3) &
+			GEN3_FUSE_MASK;
+	}
+}
+
+static void rcar_gen3_thermal_read_fuses_gen4(struct rcar_gen3_thermal_priv *priv)
+{
+	unsigned int i;
+
+	/*
+	 * Set the pseudo calibration points with fused values.
+	 * PTAT is shared between all TSCs but only fused for the first
+	 * TSC while THCODEs are fused for each TSC.
+	 */
+	priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON16) &
+		GEN4_FUSE_MASK;
+	priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON17) &
+		GEN4_FUSE_MASK;
+	priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON15) &
+		GEN4_FUSE_MASK;
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+		tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON01) &
+			GEN4_FUSE_MASK;
+		tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON02) &
+			GEN4_FUSE_MASK;
+		tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON00) &
+			GEN4_FUSE_MASK;
+	}
+}
+
 static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
 {
 	unsigned int i;
@@ -243,7 +314,8 @@ static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
 
 	/* If fuses are not set, fallback to pseudo values. */
 	thscp = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_THSCP);
-	if ((thscp & THSCP_COR_PARA_VLD) != THSCP_COR_PARA_VLD) {
+	if (!priv->info->read_fuses ||
+	    (thscp & THSCP_COR_PARA_VLD) != THSCP_COR_PARA_VLD) {
 		/* Default THCODE values in case FUSEs are not set. */
 		static const int thcodes[TSC_MAX_NUM][3] = {
 			{ 3397, 2800, 2221 },
@@ -268,29 +340,7 @@ static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
 		return false;
 	}
 
-	/*
-	 * Set the pseudo calibration points with fused values.
-	 * PTAT is shared between all TSCs but only fused for the first
-	 * TSC while THCODEs are fused for each TSC.
-	 */
-	priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT1) &
-		GEN3_FUSE_MASK;
-	priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT2) &
-		GEN3_FUSE_MASK;
-	priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT3) &
-		GEN3_FUSE_MASK;
-
-	for (i = 0; i < priv->num_tscs; i++) {
-		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
-
-		tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE1) &
-			GEN3_FUSE_MASK;
-		tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE2) &
-			GEN3_FUSE_MASK;
-		tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE3) &
-			GEN3_FUSE_MASK;
-	}
-
+	priv->info->read_fuses(priv);
 	return true;
 }
 
@@ -318,52 +368,65 @@ static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_priv *priv,
 	usleep_range(1000, 2000);
 }
 
-static const int rcar_gen3_ths_tj_1 = 126;
-static const int rcar_gen3_ths_tj_1_m3_w = 116;
+static const struct rcar_thermal_info rcar_m3w_thermal_info = {
+	.ths_tj_1 = 116,
+	.read_fuses = rcar_gen3_thermal_read_fuses_gen3,
+};
+
+static const struct rcar_thermal_info rcar_gen3_thermal_info = {
+	.ths_tj_1 = 126,
+	.read_fuses = rcar_gen3_thermal_read_fuses_gen3,
+};
+
+static const struct rcar_thermal_info rcar_gen4_thermal_info = {
+	.ths_tj_1 = 126,
+	.read_fuses = rcar_gen3_thermal_read_fuses_gen4,
+};
+
 static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
 	{
 		.compatible = "renesas,r8a774a1-thermal",
-		.data = &rcar_gen3_ths_tj_1_m3_w,
+		.data = &rcar_m3w_thermal_info,
 	},
 	{
 		.compatible = "renesas,r8a774b1-thermal",
-		.data = &rcar_gen3_ths_tj_1,
+		.data = &rcar_gen3_thermal_info,
 	},
 	{
 		.compatible = "renesas,r8a774e1-thermal",
-		.data = &rcar_gen3_ths_tj_1,
+		.data = &rcar_gen3_thermal_info,
 	},
 	{
 		.compatible = "renesas,r8a7795-thermal",
-		.data = &rcar_gen3_ths_tj_1,
+		.data = &rcar_gen3_thermal_info,
 	},
 	{
 		.compatible = "renesas,r8a7796-thermal",
-		.data = &rcar_gen3_ths_tj_1_m3_w,
+		.data = &rcar_m3w_thermal_info,
 	},
 	{
 		.compatible = "renesas,r8a77961-thermal",
-		.data = &rcar_gen3_ths_tj_1_m3_w,
+		.data = &rcar_m3w_thermal_info,
 	},
 	{
 		.compatible = "renesas,r8a77965-thermal",
-		.data = &rcar_gen3_ths_tj_1,
+		.data = &rcar_gen3_thermal_info,
 	},
 	{
 		.compatible = "renesas,r8a77980-thermal",
-		.data = &rcar_gen3_ths_tj_1,
+		.data = &rcar_gen3_thermal_info,
 	},
 	{
 		.compatible = "renesas,r8a779a0-thermal",
-		.data = &rcar_gen3_ths_tj_1,
+		.data = &rcar_gen3_thermal_info,
 	},
 	{
 		.compatible = "renesas,r8a779f0-thermal",
-		.data = &rcar_gen3_ths_tj_1,
+		.data = &rcar_gen4_thermal_info,
 	},
 	{
 		.compatible = "renesas,r8a779g0-thermal",
-		.data = &rcar_gen3_ths_tj_1,
+		.data = &rcar_gen4_thermal_info,
 	},
 	{},
 };
@@ -418,7 +481,6 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 {
 	struct rcar_gen3_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
-	const int *ths_tj_1 = of_device_get_match_data(dev);
 	struct resource *res;
 	struct thermal_zone_device *zone;
 	unsigned int i;
@@ -430,6 +492,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 
 	priv->ops = rcar_gen3_tz_of_ops;
 
+	priv->info = of_device_get_match_data(dev);
 	platform_set_drvdata(pdev, priv);
 
 	if (rcar_gen3_thermal_request_irqs(priv, pdev))
@@ -469,7 +532,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
 
 		rcar_gen3_thermal_init(priv, tsc);
-		rcar_gen3_thermal_calc_coefs(priv, tsc, *ths_tj_1);
+		rcar_gen3_thermal_calc_coefs(priv, tsc, priv->info->ths_tj_1);
 
 		zone = devm_thermal_of_zone_register(dev, i, tsc, &priv->ops);
 		if (IS_ERR(zone)) {
diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
index 2d3042098445..0d6249b36609 100644
--- a/drivers/thermal/st/st_thermal.c
+++ b/drivers/thermal/st/st_thermal.c
@@ -227,14 +227,12 @@ sensor_off:
 }
 EXPORT_SYMBOL_GPL(st_thermal_register);
 
-int st_thermal_unregister(struct platform_device *pdev)
+void st_thermal_unregister(struct platform_device *pdev)
 {
 	struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
 
 	st_thermal_sensor_off(sensor);
 	thermal_zone_device_unregister(sensor->thermal_dev);
-
-	return 0;
 }
 EXPORT_SYMBOL_GPL(st_thermal_unregister);
 
diff --git a/drivers/thermal/st/st_thermal.h b/drivers/thermal/st/st_thermal.h
index d661b2f2ef29..75a84e6ec6a7 100644
--- a/drivers/thermal/st/st_thermal.h
+++ b/drivers/thermal/st/st_thermal.h
@@ -94,7 +94,7 @@ struct st_thermal_sensor {
 
 extern int st_thermal_register(struct platform_device *pdev,
 			       const struct of_device_id *st_thermal_of_match);
-extern int st_thermal_unregister(struct platform_device *pdev);
+extern void st_thermal_unregister(struct platform_device *pdev);
 extern const struct dev_pm_ops st_thermal_pm_ops;
 
 #endif /* __STI_RESET_SYSCFG_H */
diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c
index d68596c40be9..e8cfa83b724a 100644
--- a/drivers/thermal/st/st_thermal_memmap.c
+++ b/drivers/thermal/st/st_thermal_memmap.c
@@ -172,9 +172,9 @@ static int st_mmap_probe(struct platform_device *pdev)
 	return st_thermal_register(pdev,  st_mmap_thermal_of_match);
 }
 
-static int st_mmap_remove(struct platform_device *pdev)
+static void st_mmap_remove(struct platform_device *pdev)
 {
-	return st_thermal_unregister(pdev);
+	st_thermal_unregister(pdev);
 }
 
 static struct platform_driver st_mmap_thermal_driver = {
@@ -184,7 +184,7 @@ static struct platform_driver st_mmap_thermal_driver = {
 		.of_match_table = st_mmap_thermal_of_match,
 	},
 	.probe		= st_mmap_probe,
-	.remove		= st_mmap_remove,
+	.remove_new	= st_mmap_remove,
 };
 
 module_platform_driver(st_mmap_thermal_driver);
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 793ddce72132..195f3c5d0b38 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -319,6 +319,11 @@ out:
 	return ret;
 }
 
+static void sun8i_ths_reset_control_assert(void *data)
+{
+	reset_control_assert(data);
+}
+
 static int sun8i_ths_resource_init(struct ths_device *tmdev)
 {
 	struct device *dev = tmdev->dev;
@@ -339,47 +344,35 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
 		if (IS_ERR(tmdev->reset))
 			return PTR_ERR(tmdev->reset);
 
-		tmdev->bus_clk = devm_clk_get(&pdev->dev, "bus");
+		ret = reset_control_deassert(tmdev->reset);
+		if (ret)
+			return ret;
+
+		ret = devm_add_action_or_reset(dev, sun8i_ths_reset_control_assert,
+					       tmdev->reset);
+		if (ret)
+			return ret;
+
+		tmdev->bus_clk = devm_clk_get_enabled(&pdev->dev, "bus");
 		if (IS_ERR(tmdev->bus_clk))
 			return PTR_ERR(tmdev->bus_clk);
 	}
 
 	if (tmdev->chip->has_mod_clk) {
-		tmdev->mod_clk = devm_clk_get(&pdev->dev, "mod");
+		tmdev->mod_clk = devm_clk_get_enabled(&pdev->dev, "mod");
 		if (IS_ERR(tmdev->mod_clk))
 			return PTR_ERR(tmdev->mod_clk);
 	}
 
-	ret = reset_control_deassert(tmdev->reset);
-	if (ret)
-		return ret;
-
-	ret = clk_prepare_enable(tmdev->bus_clk);
-	if (ret)
-		goto assert_reset;
-
 	ret = clk_set_rate(tmdev->mod_clk, 24000000);
 	if (ret)
-		goto bus_disable;
-
-	ret = clk_prepare_enable(tmdev->mod_clk);
-	if (ret)
-		goto bus_disable;
+		return ret;
 
 	ret = sun8i_ths_calibrate(tmdev);
 	if (ret)
-		goto mod_disable;
+		return ret;
 
 	return 0;
-
-mod_disable:
-	clk_disable_unprepare(tmdev->mod_clk);
-bus_disable:
-	clk_disable_unprepare(tmdev->bus_clk);
-assert_reset:
-	reset_control_assert(tmdev->reset);
-
-	return ret;
 }
 
 static int sun8i_h3_thermal_init(struct ths_device *tmdev)
@@ -475,9 +468,7 @@ static int sun8i_ths_register(struct ths_device *tmdev)
 		if (IS_ERR(tmdev->sensor[i].tzd))
 			return PTR_ERR(tmdev->sensor[i].tzd);
 
-		if (devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd))
-			dev_warn(tmdev->dev,
-				 "Failed to add hwmon sysfs attributes\n");
+		devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd);
 	}
 
 	return 0;
@@ -530,17 +521,6 @@ static int sun8i_ths_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int sun8i_ths_remove(struct platform_device *pdev)
-{
-	struct ths_device *tmdev = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(tmdev->mod_clk);
-	clk_disable_unprepare(tmdev->bus_clk);
-	reset_control_assert(tmdev->reset);
-
-	return 0;
-}
-
 static const struct ths_thermal_chip sun8i_a83t_ths = {
 	.sensor_num = 3,
 	.scale = 705,
@@ -642,7 +622,6 @@ MODULE_DEVICE_TABLE(of, of_ths_match);
 
 static struct platform_driver ths_driver = {
 	.probe = sun8i_ths_probe,
-	.remove = sun8i_ths_remove,
 	.driver = {
 		.name = "sun8i-thermal",
 		.of_match_table = of_ths_match,
diff --git a/drivers/thermal/tegra/tegra30-tsensor.c b/drivers/thermal/tegra/tegra30-tsensor.c
index cb584a5735ed..c243e9d76d3c 100644
--- a/drivers/thermal/tegra/tegra30-tsensor.c
+++ b/drivers/thermal/tegra/tegra30-tsensor.c
@@ -523,8 +523,7 @@ static int tegra_tsensor_register_channel(struct tegra_tsensor *ts,
 		return 0;
 	}
 
-	if (devm_thermal_add_hwmon_sysfs(ts->dev, tsc->tzd))
-		dev_warn(ts->dev, "failed to add hwmon sysfs attributes\n");
+	devm_thermal_add_hwmon_sysfs(ts->dev, tsc->tzd);
 
 	return 0;
 }
diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
index 017b0ce52122..f4f1a04f8c0f 100644
--- a/drivers/thermal/thermal-generic-adc.c
+++ b/drivers/thermal/thermal-generic-adc.c
@@ -13,6 +13,8 @@
 #include <linux/slab.h>
 #include <linux/thermal.h>
 
+#include "thermal_hwmon.h"
+
 struct gadc_thermal_info {
 	struct device *dev;
 	struct thermal_zone_device *tz_dev;
@@ -153,6 +155,8 @@ static int gadc_thermal_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	devm_thermal_add_hwmon_sysfs(&pdev->dev, gti->tz_dev);
+
 	return 0;
 }
 
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 3d4a787c6b28..17c1bbed734d 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -23,6 +23,8 @@
 #define DEFAULT_THERMAL_GOVERNOR       "user_space"
 #elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR)
 #define DEFAULT_THERMAL_GOVERNOR       "power_allocator"
+#elif defined(CONFIG_THERMAL_DEFAULT_GOV_BANG_BANG)
+#define DEFAULT_THERMAL_GOVERNOR       "bang_bang"
 #endif
 
 /* Initial state of a cooling device during binding */
diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c
index fbe55509e307..c3ae44659b81 100644
--- a/drivers/thermal/thermal_hwmon.c
+++ b/drivers/thermal/thermal_hwmon.c
@@ -271,11 +271,14 @@ int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device
 
 	ptr = devres_alloc(devm_thermal_hwmon_release, sizeof(*ptr),
 			   GFP_KERNEL);
-	if (!ptr)
+	if (!ptr) {
+		dev_warn(dev, "Failed to allocate device resource data\n");
 		return -ENOMEM;
+	}
 
 	ret = thermal_add_hwmon_sysfs(tz);
 	if (ret) {
+		dev_warn(dev, "Failed to add hwmon sysfs attributes\n");
 		devres_free(ptr);
 		return ret;
 	}
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 6a5335931f4d..d414a4b7a94a 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -182,8 +182,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 	ti_bandgap_write_update_interval(bgp, data->sensor_id,
 					 TI_BANDGAP_UPDATE_INTERVAL_MS);
 
-	if (devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal))
-		dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");
+	devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal);
 
 	return 0;
 }