diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/imx7d-nitrogen7.dts | 9 | ||||
-rw-r--r-- | arch/arm/mach-imx/cpuidle-imx6sx.c | 2 | ||||
-rw-r--r-- | arch/arm64/Makefile | 2 | ||||
-rw-r--r-- | arch/arm64/kernel/image.h | 44 | ||||
-rw-r--r-- | arch/arm64/kernel/vmlinux.lds.S | 9 | ||||
-rw-r--r-- | arch/powerpc/Makefile | 7 | ||||
-rw-r--r-- | arch/powerpc/boot/Makefile | 5 | ||||
-rw-r--r-- | arch/powerpc/boot/crt0.S | 4 | ||||
-rw-r--r-- | arch/powerpc/kernel/Makefile | 3 | ||||
-rw-r--r-- | arch/powerpc/kernel/signal_32.c | 20 | ||||
-rw-r--r-- | arch/powerpc/kernel/signal_64.c | 44 | ||||
-rw-r--r-- | arch/powerpc/mm/dump_linuxpagetables.c | 1 | ||||
-rw-r--r-- | arch/powerpc/xmon/Makefile | 5 | ||||
-rw-r--r-- | arch/x86/include/asm/pgtable_64_types.h | 5 | ||||
-rw-r--r-- | arch/x86/mm/dump_pagetables.c | 15 | ||||
-rw-r--r-- | arch/x86/xen/mmu_pv.c | 11 |
16 files changed, 119 insertions, 67 deletions
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index e7998308861f..f8caea16bc2d 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -117,13 +117,17 @@ compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - clocks = <&clks IMX7D_CLKO2_ROOT_DIV>; - clock-names = "slow"; regulator-name = "reg_wlan"; startup-delay-us = <70000>; gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + usdhc2_pwrseq: usdhc2_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&clks IMX7D_CLKO2_ROOT_DIV>; + clock-names = "ext_clock"; + }; }; &adc1 { @@ -430,6 +434,7 @@ bus-width = <4>; non-removable; vmmc-supply = <®_wlan>; + mmc-pwrseq = <&usdhc2_pwrseq>; cap-power-off-card; keep-power-in-suspend; status = "okay"; diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c index c5a5c3a70ab1..edb888ac5ad3 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sx.c +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -108,7 +108,7 @@ int __init imx6sx_cpuidle_init(void) * except for power up sw2iso which need to be * larger than LDO ramp up time. */ - imx_gpc_set_arm_power_up_timing(2, 1); + imx_gpc_set_arm_power_up_timing(0xf, 1); imx_gpc_set_arm_power_down_timing(1, 1); return cpuidle_register(&imx6sx_cpuidle_driver, NULL); diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 186461b0130c..36b9c3ec9a30 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -18,7 +18,7 @@ ifeq ($(CONFIG_RELOCATABLE), y) # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour # for relative relocs, since this leads to better Image compression # with the relocation offsets always being zero. -LDFLAGS_vmlinux += -pie -shared -Bsymbolic \ +LDFLAGS_vmlinux += -shared -Bsymbolic -z notext -z norelro \ $(call ld-option, --no-apply-dynamic-relocs) endif diff --git a/arch/arm64/kernel/image.h b/arch/arm64/kernel/image.h index c7fcb232fe47..40f9f0b078a4 100644 --- a/arch/arm64/kernel/image.h +++ b/arch/arm64/kernel/image.h @@ -76,16 +76,6 @@ __efistub_stext_offset = stext - _text; /* - * Prevent the symbol aliases below from being emitted into the kallsyms - * table, by forcing them to be absolute symbols (which are conveniently - * ignored by scripts/kallsyms) rather than section relative symbols. - * The distinction is only relevant for partial linking, and only for symbols - * that are defined within a section declaration (which is not the case for - * the definitions below) so the resulting values will be identical. - */ -#define KALLSYMS_HIDE(sym) ABSOLUTE(sym) - -/* * The EFI stub has its own symbol namespace prefixed by __efistub_, to * isolate it from the kernel proper. The following symbols are legally * accessed by the stub, so provide some aliases to make them accessible. @@ -94,27 +84,27 @@ __efistub_stext_offset = stext - _text; * linked at. The routines below are all implemented in assembler in a * position independent manner */ -__efistub_memcmp = KALLSYMS_HIDE(__pi_memcmp); -__efistub_memchr = KALLSYMS_HIDE(__pi_memchr); -__efistub_memcpy = KALLSYMS_HIDE(__pi_memcpy); -__efistub_memmove = KALLSYMS_HIDE(__pi_memmove); -__efistub_memset = KALLSYMS_HIDE(__pi_memset); -__efistub_strlen = KALLSYMS_HIDE(__pi_strlen); -__efistub_strnlen = KALLSYMS_HIDE(__pi_strnlen); -__efistub_strcmp = KALLSYMS_HIDE(__pi_strcmp); -__efistub_strncmp = KALLSYMS_HIDE(__pi_strncmp); -__efistub___flush_dcache_area = KALLSYMS_HIDE(__pi___flush_dcache_area); +__efistub_memcmp = __pi_memcmp; +__efistub_memchr = __pi_memchr; +__efistub_memcpy = __pi_memcpy; +__efistub_memmove = __pi_memmove; +__efistub_memset = __pi_memset; +__efistub_strlen = __pi_strlen; +__efistub_strnlen = __pi_strnlen; +__efistub_strcmp = __pi_strcmp; +__efistub_strncmp = __pi_strncmp; +__efistub___flush_dcache_area = __pi___flush_dcache_area; #ifdef CONFIG_KASAN -__efistub___memcpy = KALLSYMS_HIDE(__pi_memcpy); -__efistub___memmove = KALLSYMS_HIDE(__pi_memmove); -__efistub___memset = KALLSYMS_HIDE(__pi_memset); +__efistub___memcpy = __pi_memcpy; +__efistub___memmove = __pi_memmove; +__efistub___memset = __pi_memset; #endif -__efistub__text = KALLSYMS_HIDE(_text); -__efistub__end = KALLSYMS_HIDE(_end); -__efistub__edata = KALLSYMS_HIDE(_edata); -__efistub_screen_info = KALLSYMS_HIDE(screen_info); +__efistub__text = _text; +__efistub__end = _end; +__efistub__edata = _edata; +__efistub_screen_info = screen_info; #endif diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index cb3e4393b412..a2e6d19cbd16 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -99,7 +99,8 @@ SECTIONS *(.discard) *(.discard.*) *(.interp .dynamic) - *(.dynsym .dynstr .hash) + *(.dynsym .dynstr .hash .gnu.hash) + *(.eh_frame) } . = KIMAGE_VADDR + TEXT_OFFSET; @@ -176,12 +177,12 @@ SECTIONS PERCPU_SECTION(L1_CACHE_BYTES) - .rela : ALIGN(8) { + .rela.dyn : ALIGN(8) { *(.rela .rela*) } - __rela_offset = ABSOLUTE(ADDR(.rela) - KIMAGE_VADDR); - __rela_size = SIZEOF(.rela); + __rela_offset = ABSOLUTE(ADDR(.rela.dyn) - KIMAGE_VADDR); + __rela_size = SIZEOF(.rela.dyn); . = ALIGN(SEGMENT_ALIGN); __initdata_end = .; diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 1381693a4a51..7452e50f4d1f 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -236,7 +236,12 @@ endif # Work around a gcc code-gen bug with -fno-omit-frame-pointer. ifeq ($(CONFIG_FUNCTION_TRACER),y) -KBUILD_CFLAGS += -mno-sched-epilog +# Work around gcc code-gen bugs with -pg / -fno-omit-frame-pointer in gcc <= 4.8 +# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=44199 +# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=52828 +ifneq ($(cc-name),clang) +KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, -mno-sched-epilog) +endif endif cpu-as-$(CONFIG_4xx) += -Wa,-m405 diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index b479926f0167..e2a5a932c24a 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -49,6 +49,11 @@ endif BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc +ifeq ($(cc-name),clang) +BOOTCFLAGS += $(CLANG_FLAGS) +BOOTAFLAGS += $(CLANG_FLAGS) +endif + ifdef CONFIG_DEBUG_INFO BOOTCFLAGS += -g endif diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S index 32dfe6d083f3..9b9d17437373 100644 --- a/arch/powerpc/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -15,7 +15,7 @@ RELA = 7 RELACOUNT = 0x6ffffff9 - .text + .data /* A procedure descriptor used when booting this as a COFF file. * When making COFF, this comes first in the link and we're * linked at 0x500000. @@ -23,6 +23,8 @@ RELACOUNT = 0x6ffffff9 .globl _zimage_start_opd _zimage_start_opd: .long 0x500000, 0, 0, 0 + .text + b _zimage_start #ifdef __powerpc64__ .balign 8 diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 1479c61e29c5..a1089c9a9aa5 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -5,6 +5,9 @@ CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"' +# Disable clang warning for using setjmp without setjmp.h header +CFLAGS_crash.o += $(call cc-disable-warning, builtin-requires-header) + subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror ifeq ($(CONFIG_PPC64),y) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 92fb1c8dbbd8..636ea854808e 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -866,7 +866,23 @@ static long restore_tm_user_regs(struct pt_regs *regs, /* If TM bits are set to the reserved value, it's an invalid context */ if (MSR_TM_RESV(msr_hi)) return 1; - /* Pull in the MSR TM bits from the user context */ + + /* + * Disabling preemption, since it is unsafe to be preempted + * with MSR[TS] set without recheckpointing. + */ + preempt_disable(); + + /* + * CAUTION: + * After regs->MSR[TS] being updated, make sure that get_user(), + * put_user() or similar functions are *not* called. These + * functions can generate page faults which will cause the process + * to be de-scheduled with MSR[TS] set but without calling + * tm_recheckpoint(). This can cause a bug. + * + * Pull in the MSR TM bits from the user context + */ regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr_hi & MSR_TS_MASK); /* Now, recheckpoint. This loads up all of the checkpointed (older) * registers, including FP and V[S]Rs. After recheckpointing, the @@ -891,6 +907,8 @@ static long restore_tm_user_regs(struct pt_regs *regs, } #endif + preempt_enable(); + return 0; } #endif diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index b2c002993d78..979b9463e17b 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -452,20 +452,6 @@ static long restore_tm_sigcontexts(struct task_struct *tsk, if (MSR_TM_RESV(msr)) return -EINVAL; - /* pull in MSR TS bits from user context */ - regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr & MSR_TS_MASK); - - /* - * Ensure that TM is enabled in regs->msr before we leave the signal - * handler. It could be the case that (a) user disabled the TM bit - * through the manipulation of the MSR bits in uc_mcontext or (b) the - * TM bit was disabled because a sufficient number of context switches - * happened whilst in the signal handler and load_tm overflowed, - * disabling the TM bit. In either case we can end up with an illegal - * TM state leading to a TM Bad Thing when we return to userspace. - */ - regs->msr |= MSR_TM; - /* pull in MSR LE from user context */ regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); @@ -557,6 +543,34 @@ static long restore_tm_sigcontexts(struct task_struct *tsk, tm_enable(); /* Make sure the transaction is marked as failed */ tsk->thread.tm_texasr |= TEXASR_FS; + + /* + * Disabling preemption, since it is unsafe to be preempted + * with MSR[TS] set without recheckpointing. + */ + preempt_disable(); + + /* pull in MSR TS bits from user context */ + regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr & MSR_TS_MASK); + + /* + * Ensure that TM is enabled in regs->msr before we leave the signal + * handler. It could be the case that (a) user disabled the TM bit + * through the manipulation of the MSR bits in uc_mcontext or (b) the + * TM bit was disabled because a sufficient number of context switches + * happened whilst in the signal handler and load_tm overflowed, + * disabling the TM bit. In either case we can end up with an illegal + * TM state leading to a TM Bad Thing when we return to userspace. + * + * CAUTION: + * After regs->MSR[TS] being updated, make sure that get_user(), + * put_user() or similar functions are *not* called. These + * functions can generate page faults which will cause the process + * to be de-scheduled with MSR[TS] set but without calling + * tm_recheckpoint(). This can cause a bug. + */ + regs->msr |= MSR_TM; + /* This loads the checkpointed FP/VEC state, if used */ tm_recheckpoint(&tsk->thread, msr); @@ -570,6 +584,8 @@ static long restore_tm_sigcontexts(struct task_struct *tsk, regs->msr |= MSR_VEC; } + preempt_enable(); + return err; } #endif diff --git a/arch/powerpc/mm/dump_linuxpagetables.c b/arch/powerpc/mm/dump_linuxpagetables.c index 31c1c61afaa4..0bbaf7344872 100644 --- a/arch/powerpc/mm/dump_linuxpagetables.c +++ b/arch/powerpc/mm/dump_linuxpagetables.c @@ -19,6 +19,7 @@ #include <linux/hugetlb.h> #include <linux/io.h> #include <linux/mm.h> +#include <linux/highmem.h> #include <linux/sched.h> #include <linux/seq_file.h> #include <asm/fixmap.h> diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index 1bc3abb237cd..549e99e71112 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -1,7 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for xmon -subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror +# Disable clang warning for using setjmp without setjmp.h header +subdir-ccflags-y := $(call cc-disable-warning, builtin-requires-header) + +subdir-ccflags-$(CONFIG_PPC_WERROR) += -Werror GCOV_PROFILE := n UBSAN_SANITIZE := n diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h index 7764617b8f9c..bf6d2692fc60 100644 --- a/arch/x86/include/asm/pgtable_64_types.h +++ b/arch/x86/include/asm/pgtable_64_types.h @@ -94,6 +94,11 @@ typedef struct { pteval_t pte; } pte_t; # define __VMEMMAP_BASE _AC(0xffffea0000000000, UL) #endif +#define GUARD_HOLE_PGD_ENTRY -256UL +#define GUARD_HOLE_SIZE (16UL << PGDIR_SHIFT) +#define GUARD_HOLE_BASE_ADDR (GUARD_HOLE_PGD_ENTRY << PGDIR_SHIFT) +#define GUARD_HOLE_END_ADDR (GUARD_HOLE_BASE_ADDR + GUARD_HOLE_SIZE) + #define LDT_PGD_ENTRY -240UL #define LDT_BASE_ADDR (LDT_PGD_ENTRY << PGDIR_SHIFT) diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c index 2a4849e92831..6bca45d06676 100644 --- a/arch/x86/mm/dump_pagetables.c +++ b/arch/x86/mm/dump_pagetables.c @@ -51,10 +51,10 @@ struct addr_marker { enum address_markers_idx { USER_SPACE_NR = 0, KERNEL_SPACE_NR, - LOW_KERNEL_NR, -#if defined(CONFIG_MODIFY_LDT_SYSCALL) && defined(CONFIG_X86_5LEVEL) +#ifdef CONFIG_MODIFY_LDT_SYSCALL LDT_NR, #endif + LOW_KERNEL_NR, VMALLOC_START_NR, VMEMMAP_START_NR, #ifdef CONFIG_KASAN @@ -62,9 +62,6 @@ enum address_markers_idx { KASAN_SHADOW_END_NR, #endif CPU_ENTRY_AREA_NR, -#if defined(CONFIG_MODIFY_LDT_SYSCALL) && !defined(CONFIG_X86_5LEVEL) - LDT_NR, -#endif #ifdef CONFIG_X86_ESPFIX64 ESPFIX_START_NR, #endif @@ -465,11 +462,11 @@ static inline bool is_hypervisor_range(int idx) { #ifdef CONFIG_X86_64 /* - * ffff800000000000 - ffff87ffffffffff is reserved for - * the hypervisor. + * A hole in the beginning of kernel address space reserved + * for a hypervisor. */ - return (idx >= pgd_index(__PAGE_OFFSET) - 16) && - (idx < pgd_index(__PAGE_OFFSET)); + return (idx >= pgd_index(GUARD_HOLE_BASE_ADDR)) && + (idx < pgd_index(GUARD_HOLE_END_ADDR)); #else return false; #endif diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c index b33fa127a613..7631e6130d44 100644 --- a/arch/x86/xen/mmu_pv.c +++ b/arch/x86/xen/mmu_pv.c @@ -614,19 +614,20 @@ static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd, unsigned long limit) { int i, nr, flush = 0; - unsigned hole_low, hole_high; + unsigned hole_low = 0, hole_high = 0; /* The limit is the last byte to be touched */ limit--; BUG_ON(limit >= FIXADDR_TOP); +#ifdef CONFIG_X86_64 /* * 64-bit has a great big hole in the middle of the address - * space, which contains the Xen mappings. On 32-bit these - * will end up making a zero-sized hole and so is a no-op. + * space, which contains the Xen mappings. */ - hole_low = pgd_index(USER_LIMIT); - hole_high = pgd_index(PAGE_OFFSET); + hole_low = pgd_index(GUARD_HOLE_BASE_ADDR); + hole_high = pgd_index(GUARD_HOLE_END_ADDR); +#endif nr = pgd_index(limit) + 1; for (i = 0; i < nr; i++) { |