path: root/sound
AgeCommit message (Collapse)Author
2017-01-06ALSA: hda - fix headset-mic problem on a Dell laptopHui Wang
commit 989dbe4a30728c047316ab87e5fa8b609951ce7c upstream. This group of new pins is not in the pin quirk table yet, adding them to the pin quirk table to fix the headset-mic problem. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ALSA: hda - ignore the assoc and seq when comparing pin configurationsHui Wang
commit 64047d7f4912de1769d1bf0d34c6322494b13779 upstream. More and more pin configurations have been adding to the pin quirk table, lots of them are only different from assoc and seq, but they all apply to the same QUIRK_FIXUP, if we don't compare assoc and seq when matching pin configurations, it will greatly reduce the pin quirk table size. We have tested this change on a couple of Dell laptops, it worked well. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ALSA: hda/ca0132 - Add quirk for Alienware 15 R2 2016Sven Hahne
commit b5337cfe067e96b8a98699da90c7dcd2bec21133 upstream. I'm using an Alienware 15 R2 and had to use the alienware quirks to get my headphone output working. I fixed it by adding, SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE) to the patch. Signed-off-by: Sven Hahne <hahne@zeitkunst.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ALSA: hiface: Fix M2Tech hiFace driver sampling rate changeJussi Laako
commit 995c6a7fd9b9212abdf01160f6ce3193176be503 upstream. Sampling rate changes after first set one are not reflected to the hardware, while driver and ALSA think the rate has been changed. Fix the problem by properly stopping the interface at the beginning of prepare call, allowing new rate to be set to the hardware. This keeps the hardware in sync with the driver. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirksCon Kolivas
commit 82ffb6fc637150b279f49e174166d2aa3853eaf4 upstream. The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the following warning. [ 6.778995] usb 2- Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [ 6.778996] usb 2- [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Adding it to the list of devices in volume_control_quirks makes it work properly, fixing related typo. Signed-off-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06dbri: move dereference after check for NULLDan Carpenter
We accidentally introduced a dereference before the NULL check in xmit_descs() as part of silencing a GCC warning. Fixes: 16f46050e709 ("dbri: Fix compiler warning") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Two ugly build warning fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: dbri: Fix compiler warning qlogicpti: Fix compiler warnings
2016-11-28dbri: Fix compiler warningTushar Dave
dbri uses 'u32' for dma handle while invoking kernel DMA APIs, instead of using dma_addr_t. This hasn't caused any 'incompatible pointer type' warning on SPARC because until now dma_addr_t is of type u32. However, recent changes in SPARC ATU (iommu) enabled 64bit DMA and therefore dma_addr_t became of type u64. This makes 'incompatible pointer type' warnings inevitable. e.g. sound/sparc/dbri.c: In function ‘snd_dbri_create’: sound/sparc/dbri.c:2538: warning: passing argument 3 of ‘dma_zalloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:608: note: expected ‘dma_addr_t *’ but argument is of type ‘u32 *’ For the record, dbri(sbus) driver never executes on sun4v. Therefore even though 64bit DMA is enabled on SPARC, dbri continues to use legacy iommu that guarantees DMA address is always in 32bit range. This patch resolves above compiler warning. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Reviewed-by: thomas tai <thomas.tai@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18Merge tag 'sound-4.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Three trivial fixes: A regression fix for ASRock mobo, a use-after-free fix at hot-unplug of USB-audio, and a quirk for new Thinkpad models" * tag 'sound-4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Fix use-after-free of usb_device at disconnect ALSA: hda - Fix mic regression by ASRock mobo fixup ALSA: hda - add a new condition to check if it is thinkpad
2016-11-14ALSA: usb-audio: Fix use-after-free of usb_device at disconnectTakashi Iwai
The usb-audio driver implements the deferred device disconnection for the device in use. In this mode, the disconnection callback returns immediately while the actual ALSA card object removal happens later when all files get closed. As Shuah reported, this code flow, however, leads to a use-after-free, detected by KASAN: BUG: KASAN: use-after-free in snd_usb_audio_free+0x134/0x160 [snd_usb_audio] at addr ffff8801c863ce10 Write of size 8 by task pulseaudio/2244 Call Trace: [<ffffffff81b31473>] dump_stack+0x67/0x94 [<ffffffff81564ef1>] kasan_object_err+0x21/0x70 [<ffffffff8156518a>] kasan_report_error+0x1fa/0x4e0 [<ffffffff81564ad7>] ? kasan_slab_free+0x87/0xb0 [<ffffffff81565733>] __asan_report_store8_noabort+0x43/0x50 [<ffffffffa0fc0f54>] ? snd_usb_audio_free+0x134/0x160 [snd_usb_audio] [<ffffffffa0fc0f54>] snd_usb_audio_free+0x134/0x160 [snd_usb_audio] [<ffffffffa0fc0fb1>] snd_usb_audio_dev_free+0x31/0x40 [snd_usb_audio] [<ffffffff8243c78a>] __snd_device_free+0x12a/0x210 [<ffffffff8243d1f5>] snd_device_free_all+0x85/0xd0 [<ffffffff8242cae4>] release_card_device+0x34/0x130 [<ffffffff81ef1846>] device_release+0x76/0x1e0 [<ffffffff81b37ad7>] kobject_release+0x107/0x370 ..... Object at ffff8801c863cc80, in cache kmalloc-2048 size: 2048 Allocated: [<ffffffff810804eb>] save_stack_trace+0x2b/0x50 [<ffffffff81564296>] save_stack+0x46/0xd0 [<ffffffff8156450d>] kasan_kmalloc+0xad/0xe0 [<ffffffff81560d1a>] kmem_cache_alloc_trace+0xfa/0x240 [<ffffffff8214ea47>] usb_alloc_dev+0x57/0xc90 [<ffffffff8216349d>] hub_event+0xf1d/0x35f0 .... Freed: [<ffffffff810804eb>] save_stack_trace+0x2b/0x50 [<ffffffff81564296>] save_stack+0x46/0xd0 [<ffffffff81564ac1>] kasan_slab_free+0x71/0xb0 [<ffffffff81560929>] kfree+0xd9/0x280 [<ffffffff8214de6e>] usb_release_dev+0xde/0x110 [<ffffffff81ef1846>] device_release+0x76/0x1e0 .... It's the code trying to clear drvdata of the assigned usb_device where the usb_device itself was already released in usb_release_dev() after the disconnect callback. This patch fixes it by checking whether the code path is via the disconnect callback, i.e. chip->shutdown flag is set. Fixes: 79289e24194a ('ALSA: usb-audio: Refer to chip->usb_id for quirks...') Reported-and-tested-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-14ASoC: lpass-platform: fix uninitialized variableLinus Torvalds
In commit 022d00ee0b55 ("ASoC: lpass-platform: Fix broken pcm data usage") the stream specific information initialization was broken, with the dma channel information not being initialized if there was no alloc_dma_channel() helper function. Before that, the DMA channel number was implicitly initialized to zero because the backing store was allocated with devm_kzalloc(). When the init code was rewritten, that implicit initialization was lost, and gcc rightfully complains about an uninitialized variable being used. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-11ALSA: hda - Fix mic regression by ASRock mobo fixupTakashi Iwai
The commit [1a3f099101b8: ALSA: hda - Fix surround output pins for ASRock B150M mobo] introduced a fixup of pin configs for ASRock mobos to fix the surround outputs. However, this overrides the pin configs of the mic pins as if they are outputs-only, effectively disabling the mic inputs. Of course, it's a regression wrt mic functionality. Actually the pins 0x18 and 0x1a don't need to be changed; we just need to disable the bogus pins 0x14 and 0x15. Then the auto-parser will pick up mic pins as switchable and assign the surround outputs there. This patch removes the incorrect pin overrides of NID 0x18 and 0x1a from the ASRock fixup. Fixes: 1a3f099101b8 ('ALSA: hda - Fix surround output pins for ASRock...') Reported-and-tested-by: Vitor Antunes <vitor.hda@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=187431 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-10ALSA: hda - add a new condition to check if it is thinkpadHui Wang
Latest Thinkpad laptops use the HKEY_HID LEN0268 instead of the LEN0068, as a result neither audio mute led nor mic mute led can work any more. After adding the new HKEY_HID into the is_thinkpad(), both of them works well as before. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-08ALSA: info: Return error for invalid read/writeTakashi Iwai
Currently the ALSA proc handler allows read or write even if the proc file were write-only or read-only. It's mostly harmless, does thing but allocating memory and ignores the input/output. But it doesn't tell user about the invalid use, and it's confusing and inconsistent in comparison with other proc files. This patch adds some sanity checks and let the proc handler returning an -EIO error when the invalid read/write is performed. Cc: <stable@vger.kernel.org> # v4.2+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-08ALSA: info: Limit the proc text input sizeTakashi Iwai
The ALSA proc handler allows currently the write in the unlimited size until kmalloc() fails. But basically the write is supposed to be only for small inputs, mostly for one line inputs, and we don't have to handle too large sizes at all. Since the kmalloc error results in the kernel warning, it's better to limit the size beforehand. This patch adds the limit of 16kB, which must be large enough for the currently existing code. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-04Merge remote-tracking branches 'asoc/fix/rt5663', 'asoc/fix/samsung', ↵Mark Brown
'asoc/fix/sti', 'asoc/fix/sti-codec', 'asoc/fix/sunxi' and 'asoc/fix/tas571x' into asoc-linus
2016-11-04Merge remote-tracking branches 'asoc/fix/cs4270', 'asoc/fix/da7219', ↵Mark Brown
'asoc/fix/hdmi-codec', 'asoc/fix/pxa', 'asoc/fix/qcom' and 'asoc/fix/rt298' into asoc-linus
2016-11-04Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown
2016-11-02ASoC: samsung: spdif: Fix DMA filter initializationSylwester Nawrocki
This patch fixes issues introduced in commit 73f5dfc68316bef2ab7062ec "ASoC: samsung: get access to DMA engine early to defer probe properly" and indicated by a following compilation warning: CC [M] sound/soc/samsung/spdif.o sound/soc/samsung/spdif.c: In function ‘spdif_probe’: sound/soc/samsung/spdif.c:419:6: warning: ‘filter’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-01ASoC: sun4i-codec: Enable bus clock after getting GPIOChen-Yu Tsai
In the current probe function the GPIO is acquired after the codec's bus clock is enabled. However if it fails to acquire the GPIO due to a deferred probe, it does not disable the bus clock before bailing out. This would result in the clock being enabled multiple times. Move the code that enables the bus clock after the part that gets the GPIO, maintaining a separation between resource acquisition and device enablement in the probe function. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-31ASoC: lpass-cpu: add module licence and descriptionSrinivas Kandagatla
This patch adds module licence to lpass-cpu driver, without this patch lpass-cpu module would taint with below error: snd_soc_lpass_cpu: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint snd_soc_lpass_cpu: Unknown symbol regmap_write (err 0) snd_soc_lpass_cpu: Unknown symbol devm_kmalloc (err 0) ... Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-31ASoC: lpass-platform: Fix broken pcm data usageSrinivas Kandagatla
This patch fixes lpass-platform driver which was broken in v4.9-rc1. lpass_pcm_data data structure holds information specific to stream. Holding a single private pointer to it in global lpass_data will not work, because it would be overwritten by for each pcm instance. This code was breaking playback when we have both playback and capture pcm streams, as playback settings are over written by capture settings. Fix this by moving channel allocation logic out of pcm_new to pcm_open so that we can store the stream specific information in private_data of snd_pcm_runtime. Fixes: 6adcbdcd4b6e ("ASoC: lpass-platform: don't use snd_soc_pcm_set_drvdata()") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-31ASoC: sun4i-codec: return error code instead of NULL when create_card failsChen-Yu Tsai
When sun4i_codec_create_card fails, we do not assign a proper error code to the return value. The return value would be 0 from the previous function call, or we would have bailed out sooner. This would confuse the driver core into thinking the device probe succeeded, when in fact it didn't, leaving various devres based resources lingering. Make the create_card function pass back a meaningful error code, and assign it to the return value. Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28ASoC: hdmi-codec: Fix hdmi_of_xlate_dai_name when #sound-dai-cells = <0>Jon Medhurst (Tixy)
If a DAI specifies "#sound-dai-cells = <0>" in device-tree then hdmi_of_xlate_dai_name() will be called with zero args, which it isn't implemented to cope with. The resulting use of an uninitialised variable for the id will usually result in an error like: asoc-simple-card sound: parse error -11 asoc-simple-card: probe of sound failed with error -11 Fix this by using and id of zero if no arg is provided. Fixes: 9731f82d6016 ("ASoC: hdmi-codec: enable multi probe for same device") Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28ASoC: samsung: get access to DMA engine early to defer probe properlyMarek Szyprowski
ASoC Samsung sub-drivers tried to get access to their DMA engine controllers as a last step in driver probe. If a DMA engine was not available yet, samsung_asoc_dma_platform_register() function ended in -EPROBE_DEFER, but the driver already registered its component to ASoC core. This patch moves samsung_asoc_dma_platform_register() call before registering any components, to the common place, where driver was gathering all needed resources. In case of Samsung Exynos i2s driver the issue was even worse. The driver managed already to register its secondary DAI platform device before even getting the DMA engine access. That together with -EPROBE_DEFER error code from samsung_i2s_probe() immediately triggered another round of deferred probe retry and in turn endless loop of driver probing. This patch fixes broken boot on Odroid XU3 and other Exynos5422-based boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28ASoC: da7219: Connect output enable register to DAIOUTStephen Barber
da7219 output (for headset capture) should be set to high-impedance when not in use, since it will otherwise interfere with output from other codecs attached to the same DAI. Signed-off-by: Stephen Barber <smbarber@chromium.org> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28ASoC: Intel: Skylake: Fix to turn off hdmi power on probe failureSodhi, VunnyX
HDMI codec is required to be powered up before controller initialization for successful enumeration of codec. If the probe fails it needs to be powered off to balance the power state of HDMI codec. This fix balances the reference count in the error path before turning off the codec. Reported-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Sodhi, VunnyX <vunnyx.sodhi@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-27ALSA: usb-audio: Add quirk for Syntek STK1160Marcel Hasler
The stk1160 chip needs QUIRK_AUDIO_ALIGN_TRANSFER. This patch resolves the issue reported on the mailing list (http://marc.info/?l=linux-sound&m=139223599126215&w=2) and also fixes bug 180071 (https://bugzilla.kernel.org/show_bug.cgi?id=180071). Signed-off-by: Marcel Hasler <mahasler@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-26ASoC: sti-sas: enable fast io for regmapArnaud Pouliquen
Some registers accesses are done in atomic context. Enable fast io to use spinlock instead of mutex to protect access. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: sti: fix channel status update after playback startArnaud Pouliquen
If 'IEC958 Playback Default' control is updated during playback, Channel status needs to be set according to the runtime structure. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-25ALSA: seq: Fix time account regressionTakashi Iwai
The recent rewrite of the sequencer time accounting using timespec64 in the commit [3915bf294652: ALSA: seq_timer: use monotonic times internally] introduced a bad regression. Namely, the time reported back doesn't increase but goes back and forth. The culprit was obvious: the delta is stored to the result (cur_time = delta), instead of adding the delta (cur_time += delta)! Let's fix it. Fixes: 3915bf294652 ('ALSA: seq_timer: use monotonic times internally') Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=177571 Reported-by: Yves Guillemot <yc.guillemot@wanadoo.fr> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-25ALSA: hda - Fix surround output pins for ASRock B150M moboTakashi Iwai
ASRock B150M Pro4/D3 mobo with ALC892 codec doesn't seem to provide proper pins for the surround outputs, hence we need to specify the pincfgs manually with a couple of other corrections. Reported-and-tested-by: Benjamin Valentin <benpicco@googlemail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-24ASoC: PXA: Brownstone needs I2CArnd Bergmann
I rand into a new build error with SND_MMP_SOC_BROWNSTONE: warning: (SND_MMP_SOC_BROWNSTONE && SND_SOC_SAMSUNG_SMDK_WM8994 && SND_SOC_SMDK_WM8994_PCM && SND_SOC_LITTLEMILL) selects MFD_WM8994 which has unmet direct dependencies (HAS_IOMEM && I2C) drivers/mfd/wm8994-core.c:688:1: error: data definition has no type or storage class [-Werror] drivers/mfd/wm8994-core.c:688:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] I don't see why this never showed up before, as the dependency seems to have been missing since the symbol was first introduced several years ago. This adds a dependency like the other drivers have. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24ASoC: Intel: Skylake: Always acquire runtime pm ref on unloadLukas Wunner
skl_probe() releases a runtime pm ref unconditionally wheras skl_remove() acquires one only if the device is wakeup capable. Thus if the device is not wakeup capable, unloading and reloading the module will result in the refcount being decreased below 0. Fix it. Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver") Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24ASoC: Intel: Atom: add terminate entry for dmi_system_id tablesWei Yongjun
Make sure dmi_system_id tables are NULL terminated. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24ASoC: rt298: fix jack type detect errorBard Liao
rt298_jack_detect may be called before card is instantiated. And snd_soc_dapm_force_enable_pin will not work in that case. So, update bit manually by regmap_update_bits. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-20ALSA: hda - Fix headset mic detection problem for two Dell laptopsHui Wang
They uses the codec ALC255, and have the different pin cfg definition from the ones in the existing pin quirk table. Now adding them into the table to fix the problem. Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-18ALSA: asihpi: fix kernel memory disclosureVlad Tsyrklevich
Some elements in hr are not cleared before being copied to user space, leaking kernel heap memory to user space. For example, this happens in the error handling code for the HPI_ADAPTER_DELETE case. Zero the memory before it's copied. Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-18ALSA: hda - Adding a new group of pin cfg into ALC295 pin quirk tableHui Wang
We have a new Dell laptop model which uses ALC295, the pin definition is different from the existing ones in the pin quirk table, to fix the headset mic detection and mic mute led's problem, we need to add the new pin defintion into the pin quirk table. Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-18ALSA: hda - allow 40 bit DMA mask for NVidia devicesArd Biesheuvel
Commit 49d9e77e72cf ("ALSA: hda - Fix system panic when DMA > 40 bits for Nvidia audio controllers") simply disabled any DMA exceeding 32 bits for NVidia devices, even though they are capable of performing DMA up to 40 bits. On some architectures (such as arm64), system memory is not guaranteed to be 32-bit addressable by PCI devices, and so this change prevents NVidia devices from working on platforms such as AMD Seattle. Since the original commit already mentioned that up to 40 bits of DMA is supported, and given that the code has been updated in the meantime to support a 40 bit DMA mask on other devices, revert commit 49d9e77e72cf and explicitly set the DMA mask to 40 bits for NVidia devices. Fixes: 49d9e77e72cf ('ALSA: hda - Fix system panic when DMA > 40 bits...') Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-15Merge tag 'sound-fix-4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few trivial small fixes" * tag 'sound-fix-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: line6: fix a crash in line6_hwdep_write() ALSA: seq: fix passing wrong pointer in function call of compatibility layer ALSA: hda - Fix a failure of micmute led when having multi adcs ALSA: line6: Fix POD X3 Live audio input
2016-10-13ASoC: rt5663: fix a debug statementDan Carpenter
We increment "i" before printing the debug statement. That makes it the wrong sleep_time[] information and Smatch complains that the last increment could be beyond the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-12ALSA: line6: fix a crash in line6_hwdep_write()Dan Carpenter
The error checking here is messed up so we could end up dereferencing -EFAULT. Fixes: a16039cbf1a1 ('ALSA: line6: Add hwdep interface to access the POD control messages') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-12ALSA: seq: fix passing wrong pointer in function call of compatibility layerTakashi Sakamoto
This commit is a fix for Linux 4.9-rc1. In former commit, a function call of compatibility layer for ALSA sequencer core was obsoleted by an alternative. Although, the alternative gets a pointer to kernel stack due to mis-programming. As a result, ALSA sequencer core unexpectedly refers over kernel stack. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 8ce8eb601c71 ("ALSA: seq: add an alternative way to handle ioctl requests") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-12ALSA: hda - Fix a failure of micmute led when having multi adcsHui Wang
On a Dell laptop, there is no global adcs for all input devices, so the input devices use the different adc, as a result, dyn_adc_switch is set to true. In this situation, it is safe to control the micmute led according to user's choice of muting/unmuting the current input device, since only current input device path is active, while other input device paths are inactive and powered down. Fixes: 00ef99408b6c ('ALSA: hda - add mic mute led hook for dell machines') Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-11treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11kthread: kthread worker API cleanupPetr Mladek
A good practice is to prefix the names of functions by the name of the subsystem. The kthread worker API is a mix of classic kthreads and workqueues. Each worker has a dedicated kthread. It runs a generic function that process queued works. It is implemented as part of the kthread subsystem. This patch renames the existing kthread worker API to use the corresponding name from the workqueues API prefixed by kthread_: __init_kthread_worker() -> __kthread_init_worker() init_kthread_worker() -> kthread_init_worker() init_kthread_work() -> kthread_init_work() insert_kthread_work() -> kthread_insert_work() queue_kthread_work() -> kthread_queue_work() flush_kthread_work() -> kthread_flush_work() flush_kthread_worker() -> kthread_flush_worker() Note that the names of DEFINE_KTHREAD_WORK*() macros stay as they are. It is common that the "DEFINE_" prefix has precedence over the subsystem names. Note that INIT() macros and init() functions use different naming scheme. There is no good solution. There are several reasons for this solution: + "init" in the function names stands for the verb "initialize" aka "initialize worker". While "INIT" in the macro names stands for the noun "INITIALIZER" aka "worker initializer". + INIT() macros are used only in DEFINE() macros + init() functions are used close to the other kthread() functions. It looks much better if all the functions use the same scheme. + There will be also kthread_destroy_worker() that will be used close to kthread_cancel_work(). It is related to the init() function. Again it looks better if all functions use the same naming scheme. + there are several precedents for such init() function names, e.g. amd_iommu_init_device(), free_area_init_node(), jump_label_init_type(), regmap_init_mmio_clk(), + It is not an argument but it was inconsistent even before. [arnd@arndb.de: fix linux-next merge conflict] Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.com Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11ASoC: cs4270: fix DAPM stream name mismatchmurray foster
Mismatching stream names in DAPM route and widget definitions are causing compilation errors. Fixing these names allows the cs4270 driver to compile and function. [Errors must be at probe time not compile time -- broonie] Signed-off-by: Murray Foster <mrafoster@gmail.com> Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-10-11ASoC: Intel: haswell depends on sst-firmwareArnd Bergmann
The Intel Haswell audio support fails to link if CONFIG_SND_SOC_INTEL_SST_FIRMWARE is disabled: sst-haswell-dsp.c: undefined reference to `sst_mem_block_register' sst-haswell-dsp.c: undefined reference to `sst_mem_block_unregister_all' sst-haswell-dsp.c: undefined reference to `sst_module_alloc_blocks' sst-haswell-dsp.c: undefined reference to `sst_module_free' sst-haswell-dsp.c: undefined reference to `sst_module_new' sst-haswell-pcm.c: undefined reference to `sst_module_get_from_id' sst-haswell-pcm.c: undefined reference to `sst_module_runtime_restore' sst-haswell-pcm.c: undefined reference to `sst_module_runtime_save' ERROR: "sst_block_alloc_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_block_free_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_copyfrom" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_copyto" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_get_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_put_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_free" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_get_offset" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_free_all" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_reload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_unload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_alloc_blocks" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_get_from_id" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! This moves the 'select' statement from two of the three haswell based users into the line that is used by all of them, so make it harder to get wrong and to fix the existing randconfig regressions. Fixes: 2d995e5dc283 ("ASoC: Intel: boards: Add bdw-rt5677 machine driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-10ALSA: line6: Fix POD X3 Live audio inputAndrej Krutak
The commit c039aaa77a7d1d9375665a8b59ec16dc7d23e259 was incomplete, missing part of the setup for Live. This makes also audio input work, in addition to audio output. Fixes: c039aaa77a7d1d9375665a8b59ec16dc7d23e259 Reported-by: Eddi De Pieri <eddi@depieri.net> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>