Merge branch 'tracking-armlt-arm64' into integration-linaro-vexpress

19 files changed, 1050 insertions, 109 deletions

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index c04454876bcb..e89200322630 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -160,6 +160,13 @@ config NR_CPUS
 	default "8" if ARCH_XGENE
 	default "4"
 
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP
+	help
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
 source kernel/Kconfig.preempt
 
 config HZ
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index c52bdb051f66..13338169fe30 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,4 +1,4 @@
-dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb fvp-base-gicv2legacy-psci.dtb fvp-base-gicv2-psci.dtb fvp-base-gicv3-psci.dtb
 dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
 
 targets += dtbs
diff --git a/arch/arm64/boot/dts/fvp-base-gicv2-psci.dts b/arch/arm64/boot/dts/fvp-base-gicv2-psci.dts
new file mode 100644
index 000000000000..1f855d8120ea
--- /dev/null
+++ b/arch/arm64/boot/dts/fvp-base-gicv2-psci.dts
@@ -0,0 +1,215 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+};
+
+/ {
+	model = "FVP Base";
+	compatible = "arm,vfp-base", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		/*
+		      <0x00000008 0x80000000 0 0x80000000>;
+		*/
+	};
+
+	gic: interrupt-controller@2f000000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x2f000000 0 0x10000>,
+		      <0x0 0x2c000000 0 0x2000>,
+		      <0x0 0x2c010000 0 0x2000>,
+		      <0x0 0x2c02f000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xff01>,
+			     <1 14 0xff01>,
+			     <1 11 0xff01>,
+			     <1 10 0xff01>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+
+		/include/ "rtsm_ve-motherboard.dtsi"
+	};
+
+	panels {
+		panel@0 {
+			compatible	= "panel";
+			mode		= "XVGA";
+			refresh		= <60>;
+			xres		= <1024>;
+			yres		= <768>;
+			pixclock	= <15748>;
+			left_margin	= <152>;
+			right_margin	= <48>;
+			upper_margin	= <23>;
+			lower_margin	= <3>;
+			hsync_len	= <104>;
+			vsync_len	= <4>;
+			sync		= <0>;
+			vmode		= "FB_VMODE_NONINTERLACED";
+			tim2		= "TIM2_BCD", "TIM2_IPC";
+			cntl		= "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+			caps		= "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+			bpp		= <16>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/fvp-base-gicv2legacy-psci.dts b/arch/arm64/boot/dts/fvp-base-gicv2legacy-psci.dts
new file mode 100644
index 000000000000..aa1986dcc8dc
--- /dev/null
+++ b/arch/arm64/boot/dts/fvp-base-gicv2legacy-psci.dts
@@ -0,0 +1,215 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+};
+
+/ {
+	model = "FVP Base";
+	compatible = "arm,vfp-base", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		/*
+		      <0x00000008 0x80000000 0 0x80000000>;
+		*/
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x2c001000 0 0x1000>,
+		      <0x0 0x2c002000 0 0x1000>,
+		      <0x0 0x2c004000 0 0x2000>,
+		      <0x0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xff01>,
+			     <1 14 0xff01>,
+			     <1 11 0xff01>,
+			     <1 10 0xff01>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+
+		/include/ "rtsm_ve-motherboard.dtsi"
+	};
+
+	panels {
+		panel@0 {
+			compatible	= "panel";
+			mode		= "XVGA";
+			refresh		= <60>;
+			xres		= <1024>;
+			yres		= <768>;
+			pixclock	= <15748>;
+			left_margin	= <152>;
+			right_margin	= <48>;
+			upper_margin	= <23>;
+			lower_margin	= <3>;
+			hsync_len	= <104>;
+			vsync_len	= <4>;
+			sync		= <0>;
+			vmode		= "FB_VMODE_NONINTERLACED";
+			tim2		= "TIM2_BCD", "TIM2_IPC";
+			cntl		= "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+			caps		= "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+			bpp		= <16>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/fvp-base-gicv3-psci.dts b/arch/arm64/boot/dts/fvp-base-gicv3-psci.dts
new file mode 100644
index 000000000000..6d491391cbb5
--- /dev/null
+++ b/arch/arm64/boot/dts/fvp-base-gicv3-psci.dts
@@ -0,0 +1,215 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+};
+
+/ {
+	model = "FVP Base";
+	compatible = "arm,vfp-base", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		/*
+		      <0x00000008 0x80000000 0 0x80000000>;
+		*/
+	};
+
+	gic: interrupt-controller@2cf00000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x2f000000 0 0x10000>,	// GICD
+		      <0x0 0x2f100000 0 0x200000>,	// GICR
+		      <0x0 0x2c000000 0 0x2000>,	// GICC
+		      <0x0 0x2c010000 0 0x2000>,	// GICH
+		      <0x0 0x2c02f000 0 0x2000>;	// GICV
+		interrupts = <1 9 4>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xff01>,
+			     <1 14 0xff01>,
+			     <1 11 0xff01>,
+			     <1 10 0xff01>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+
+		/include/ "rtsm_ve-motherboard.dtsi"
+	};
+
+	panels {
+		panel@0 {
+			compatible	= "panel";
+			mode		= "XVGA";
+			refresh		= <60>;
+			xres		= <1024>;
+			yres		= <768>;
+			pixclock	= <15748>;
+			left_margin	= <152>;
+			right_margin	= <48>;
+			upper_margin	= <23>;
+			lower_margin	= <3>;
+			hsync_len	= <104>;
+			vsync_len	= <4>;
+			sync		= <0>;
+			vmode		= "FB_VMODE_NONINTERLACED";
+			tim2		= "TIM2_BCD", "TIM2_IPC";
+			cntl		= "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+			caps		= "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+			bpp		= <16>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
index 572005ea2217..86f67bfc3e41 100644
--- a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
@@ -12,6 +12,9 @@
 /memreserve/ 0x80000000 0x00010000;
 
 / {
+};
+
+/ {
 	model = "RTSM_VE_AEMv8A";
 	compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
 	interrupt-parent = <&gic>;
@@ -156,4 +159,27 @@
 
 		/include/ "rtsm_ve-motherboard.dtsi"
 	};
+
+	panels {
+		panel@0 {
+			compatible	= "panel";
+			mode		= "XVGA";
+			refresh		= <60>;
+			xres		= <1024>;
+			yres		= <768>;
+			pixclock	= <15748>;
+			left_margin	= <152>;
+			right_margin	= <48>;
+			upper_margin	= <23>;
+			lower_margin	= <3>;
+			hsync_len	= <104>;
+			vsync_len	= <4>;
+			sync		= <0>;
+			vmode		= "FB_VMODE_NONINTERLACED";
+			tim2		= "TIM2_BCD", "TIM2_IPC";
+			cntl		= "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+			caps		= "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+			bpp		= <16>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
index b45e5f39f577..61c6879dd221 100644
--- a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
@@ -182,7 +182,16 @@
 				interrupts = <14>;
 				clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
 				clock-names = "clcdclk", "apb_pclk";
+				mode = "XVGA";
+				use_dma = <0>;
+				framebuffer = <0x18000000 0x00180000>;
 			};
+
+                        virtio_block@0130000 {
+                                compatible = "virtio,mmio";
+                                reg = <0x130000 0x1000>;
+                                interrupts = <42>;
+                        };
 		};
 
 		v2m_fixed_3v3: fixedregulator@0 {
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 31c81e9b792e..7e776373c6df 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -26,6 +26,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_XGENE=y
 CONFIG_SMP=y
+CONFIG_HOTPLUG_CPU=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_CMDLINE="console=ttyAMA0"
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
index 0332fc077f6e..e1f7ecdde11f 100644
--- a/arch/arm64/include/asm/irq.h
+++ b/arch/arm64/include/asm/irq.h
@@ -4,6 +4,7 @@
 #include <asm-generic/irq.h>
 
 extern void (*handle_arch_irq)(struct pt_regs *);
+extern void migrate_irqs(void);
 extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 
 #endif
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index 4b8023c5d146..d2ef02e67f61 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -60,21 +60,50 @@ struct secondary_data {
 	void *stack;
 };
 extern struct secondary_data secondary_data;
-extern void secondary_holding_pen(void);
-extern volatile unsigned long secondary_holding_pen_release;
+extern void secondary_entry(void);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
 struct device_node;
 
-struct smp_enable_ops {
+extern int __cpu_disable(void);
+
+extern void __cpu_die(unsigned int cpu);
+extern void cpu_die(void);
+
+/**
+ * struct smp_operations - Callback operations for hotplugging CPUs.
+ *
+ * @name:	Name of the property as appears in a devicetree cpu node's
+ *		enable-method property.
+ * @cpu_init:	Reads any data necessary for a specific enable-method form the
+ *		devicetree, for a given cpu node and proposed logical id.
+ * @cpu_prepare: Early one-time preparation step for a cpu. If there is a
+ *		mechanism for doing so, tests whether it is possible to boot
+ *		the given CPU.
+ * @cpu_boot:	Boots a cpu into the kernel.
+ * @cpu_postboot: Optionally, perform any post-boot cleanup or necesary
+ *		synchronisation. Called from the cpu being booted.
+ * @cpu_disable: Prepares a cpu to die. May fail for some mechanism-specific
+ * 		reason, which will cause the hot unplug to be aborted. Called
+ * 		from the cpu to be killed.
+ * @cpu_die:	Makes the a leave the kernel. Must not fail. Called from the
+ *		cpu being killed.
+ */
+struct smp_operations {
 	const char	*name;
-	int		(*init_cpu)(struct device_node *, int);
-	int		(*prepare_cpu)(int);
+	int		(*cpu_init)(struct device_node *, unsigned int);
+	int		(*cpu_prepare)(unsigned int);
+	int		(*cpu_boot)(unsigned int);
+	void		(*cpu_postboot)(void);
+#ifdef CONFIG_HOTPLUG_CPU
+	int  (*cpu_disable)(unsigned int cpu);
+	void (*cpu_die)(unsigned int cpu);
+#endif
 };
 
-extern const struct smp_enable_ops smp_spin_table_ops;
-extern const struct smp_enable_ops smp_psci_ops;
+extern const struct smp_operations smp_spin_table_ops;
+extern const struct smp_operations smp_psci_ops;
 
 #endif /* ifndef __ASM_SMP_H */
diff --git a/arch/arm64/kernel/cputable.c b/arch/arm64/kernel/cputable.c
index 63cfc4a43f4e..fd3993cb060f 100644
--- a/arch/arm64/kernel/cputable.c
+++ b/arch/arm64/kernel/cputable.c
@@ -22,7 +22,7 @@
 
 extern unsigned long __cpu_setup(void);
 
-struct cpu_info __initdata cpu_table[] = {
+struct cpu_info cpu_table[] = {
 	{
 		.cpu_id_val	= 0x000f0000,
 		.cpu_id_mask	= 0x000f0000,
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 7090c126797c..bf7efdf2d7e7 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -225,7 +225,6 @@ ENTRY(__boot_cpu_mode)
 	.quad	PAGE_OFFSET
 
 #ifdef CONFIG_SMP
-	.pushsection    .smp.pen.text, "ax"
 	.align	3
 1:	.quad	.
 	.quad	secondary_holding_pen_release
@@ -250,7 +249,16 @@ pen:	ldr	x4, [x3]
 	wfe
 	b	pen
 ENDPROC(secondary_holding_pen)
-	.popsection
+
+	/*
+	 * Secondary entry point that jumps straight into the kernel. Only to
+	 * be used where CPUs are brought online dynamically by the kernel.
+	 */
+ENTRY(secondary_entry)
+	bl	__calc_phys_offset		// x2=phys offset
+	bl	el2_setup			// Drop to EL1
+	b	secondary_startup
+ENDPROC(secondary_entry)
 
 ENTRY(secondary_startup)
 	/*
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index ecb3354292ed..473e5dbf8f39 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -81,3 +81,64 @@ void __init init_IRQ(void)
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
 }
+
+#ifdef CONFIG_HOTPLUG_CPU
+static bool migrate_one_irq(struct irq_desc *desc)
+{
+	struct irq_data *d = irq_desc_get_irq_data(desc);
+	const struct cpumask *affinity = d->affinity;
+	struct irq_chip *c;
+	bool ret = false;
+
+	/*
+	 * If this is a per-CPU interrupt, or the affinity does not
+	 * include this CPU, then we have nothing to do.
+	 */
+	if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
+		return false;
+
+	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
+		affinity = cpu_online_mask;
+		ret = true;
+	}
+
+	c = irq_data_get_irq_chip(d);
+	if (!c->irq_set_affinity)
+		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+		cpumask_copy(d->affinity, affinity);
+
+	return ret;
+}
+
+/*
+ * The current CPU has been marked offline.  Migrate IRQs off this CPU.
+ * If the affinity settings do not allow other CPUs, force them onto any
+ * available CPU.
+ *
+ * Note: we must iterate over all IRQs, whether they have an attached
+ * action structure or not, as we need to get chained interrupts too.
+ */
+void migrate_irqs(void)
+{
+	unsigned int i;
+	struct irq_desc *desc;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	for_each_irq_desc(i, desc) {
+		bool affinity_broken;
+
+		raw_spin_lock(&desc->lock);
+		affinity_broken = migrate_one_irq(desc);
+		raw_spin_unlock(&desc->lock);
+
+		if (affinity_broken)
+			pr_warn_ratelimited("IRQ%u no longer affine to CPU%u\n",
+					    i, smp_processor_id());
+	}
+
+	local_irq_restore(flags);
+}
+#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 7ae8a1f00c3c..de17c89985db 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -102,6 +102,13 @@ void arch_cpu_idle(void)
 	local_irq_enable();
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+void arch_cpu_idle_dead(void)
+{
+       cpu_die();
+}
+#endif
+
 void machine_shutdown(void)
 {
 #ifdef CONFIG_SMP
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 78db90dcc910..ffc78bbfa7ca 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -54,7 +54,6 @@
  * where to place its SVC stack
  */
 struct secondary_data secondary_data;
-volatile unsigned long secondary_holding_pen_release = INVALID_HWID;
 
 enum ipi_msg_type {
 	IPI_RESCHEDULE,
@@ -63,22 +62,7 @@ enum ipi_msg_type {
 	IPI_CPU_STOP,
 };
 
-static DEFINE_RAW_SPINLOCK(boot_lock);
-
-/*
- * Write secondary_holding_pen_release in a way that is guaranteed to be
- * visible to all observers, irrespective of whether they're taking part
- * in coherency or not.  This is necessary for the hotplug code to work
- * reliably.
- */
-static void write_pen_release(u64 val)
-{
-	void *start = (void *)&secondary_holding_pen_release;
-	unsigned long size = sizeof(secondary_holding_pen_release);
-
-	secondary_holding_pen_release = val;
-	__flush_dcache_area(start, size);
-}
+static const struct smp_operations *smp_ops[NR_CPUS];
 
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
@@ -86,38 +70,10 @@ static void write_pen_release(u64 val)
  */
 static int boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	unsigned long timeout;
-
-	/*
-	 * Set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	raw_spin_lock(&boot_lock);
-
-	/*
-	 * Update the pen release flag.
-	 */
-	write_pen_release(cpu_logical_map(cpu));
-
-	/*
-	 * Send an event, causing the secondaries to read pen_release.
-	 */
-	sev();
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		if (secondary_holding_pen_release == INVALID_HWID)
-			break;
-		udelay(10);
-	}
-
-	/*
-	 * Now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	raw_spin_unlock(&boot_lock);
+	if (smp_ops[cpu]->cpu_boot)
+		return smp_ops[cpu]->cpu_boot(cpu);
 
-	return secondary_holding_pen_release != INVALID_HWID ? -ENOSYS : 0;
+	return -EOPNOTSUPP;
 }
 
 static DECLARE_COMPLETION(cpu_running);
@@ -187,17 +143,8 @@ asmlinkage void secondary_start_kernel(void)
 	preempt_disable();
 	trace_hardirqs_off();
 
-	/*
-	 * Let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	write_pen_release(INVALID_HWID);
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	raw_spin_lock(&boot_lock);
-	raw_spin_unlock(&boot_lock);
+	if (smp_ops[cpu]->cpu_postboot)
+		smp_ops[cpu]->cpu_postboot();
 
 	/*
 	 * OK, now it's safe to let the boot CPU continue.  Wait for
@@ -221,6 +168,103 @@ asmlinkage void secondary_start_kernel(void)
 	cpu_startup_entry(CPUHP_ONLINE);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static int op_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * If we don't have a cpu_die method, abort before we reach the point
+	 * of no return. CPU0 may not have an smp_ops, so test for it.
+	 */
+	if (!smp_ops[cpu] || !smp_ops[cpu]->cpu_die)
+		return -EOPNOTSUPP;
+
+	/*
+	 * We may need to abort a hot unplug for some other mechanism-specific
+	 * reason.
+	 */
+	if (smp_ops[cpu]->cpu_disable)
+		return smp_ops[cpu]->cpu_disable(cpu);
+
+	return 0;
+}
+
+/*
+ * __cpu_disable runs on the processor to be shutdown.
+ */
+int __cpu_disable(void)
+{
+	unsigned int cpu = smp_processor_id();
+	int ret;
+
+	ret = op_cpu_disable(cpu);
+	if (ret)
+		return ret;
+
+	/*
+	 * Take this CPU offline.  Once we clear this, we can't return,
+	 * and we must not schedule until we're ready to give up the cpu.
+	 */
+	set_cpu_online(cpu, false);
+
+	/*
+	 * OK - migrate IRQs away from this CPU
+	 */
+	migrate_irqs();
+
+	/*
+	 * Remove this CPU from the vm mask set of all processes.
+	 */
+	clear_tasks_mm_cpumask(cpu);
+
+	return 0;
+}
+
+static DECLARE_COMPLETION(cpu_died);
+
+/*
+ * called on the thread which is asking for a CPU to be shutdown -
+ * waits until shutdown has completed, or it is timed out.
+ */
+void __cpu_die(unsigned int cpu)
+{
+	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
+		pr_crit("CPU%u: cpu didn't die\n", cpu);
+		return;
+	}
+	pr_notice("CPU%u: shutdown\n", cpu);
+}
+
+/*
+ * Called from the idle thread for the CPU which has been shutdown.
+ *
+ * Note that we disable IRQs here, but do not re-enable them
+ * before returning to the caller. This is also the behaviour
+ * of the other hotplug-cpu capable cores, so presumably coming
+ * out of idle fixes this.
+ */
+void __ref cpu_die(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	idle_task_exit();
+
+	local_irq_disable();
+	mb();
+
+	/* Tell __cpu_die() that this CPU is now safe to dispose of */
+	complete(&cpu_died);
+
+	/*
+	 * Actually shutdown the CPU. This must never fail. The specific hotplug
+	 * mechanism must perform all required cache maintenance to ensure that
+	 * no dirty lines are lost in the process of shutting down the CPU.
+	 */
+	smp_ops[cpu]->cpu_die(cpu);
+
+	BUG();
+}
+#endif
+
 void __init smp_cpus_done(unsigned int max_cpus)
 {
 	pr_info("SMP: Total of %d processors activated.\n", num_online_cpus());
@@ -232,17 +276,15 @@ void __init smp_prepare_boot_cpu(void)
 
 static void (*smp_cross_call)(const struct cpumask *, unsigned int);
 
-static const struct smp_enable_ops *enable_ops[] __initconst = {
+static const struct smp_operations *supported_smp_ops[] __initconst = {
 	&smp_spin_table_ops,
 	&smp_psci_ops,
 	NULL,
 };
 
-static const struct smp_enable_ops *smp_enable_ops[NR_CPUS];
-
-static const struct smp_enable_ops * __init smp_get_enable_ops(const char *name)
+static const struct smp_operations * __init smp_get_ops(const char *name)
 {
-	const struct smp_enable_ops **ops = enable_ops;
+	const struct smp_operations **ops = supported_smp_ops;
 
 	while (*ops) {
 		if (!strcmp(name, (*ops)->name))
@@ -263,7 +305,7 @@ void __init smp_init_cpus(void)
 {
 	const char *enable_method;
 	struct device_node *dn = NULL;
-	int i, cpu = 1;
+	unsigned int i, cpu = 1;
 	bool bootcpu_valid = false;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
@@ -305,6 +347,8 @@ void __init smp_init_cpus(void)
 			}
 		}
 
+		enable_method = of_get_property(dn, "enable-method", NULL);
+
 		/*
 		 * The numbering scheme requires that the boot CPU
 		 * must be assigned logical id 0. Record it so that
@@ -320,11 +364,12 @@ void __init smp_init_cpus(void)
 
 			bootcpu_valid = true;
 
+			if (enable_method)
+				smp_ops[0] = smp_get_ops(enable_method);
+
 			/*
-			 * cpu_logical_map has already been
-			 * initialized and the boot cpu doesn't need
-			 * the enable-method so continue without
-			 * incrementing cpu.
+			 * cpu_logical_map has already been initialized so
+			 * continue without incrementing cpu.
 			 */
 			continue;
 		}
@@ -332,25 +377,21 @@ void __init smp_init_cpus(void)
 		if (cpu >= NR_CPUS)
 			goto next;
 
-		/*
-		 * We currently support only the "spin-table" enable-method.
-		 */
-		enable_method = of_get_property(dn, "enable-method", NULL);
 		if (!enable_method) {
 			pr_err("%s: missing enable-method property\n",
 				dn->full_name);
 			goto next;
 		}
 
-		smp_enable_ops[cpu] = smp_get_enable_ops(enable_method);
+		smp_ops[cpu] = smp_get_ops(enable_method);
 
-		if (!smp_enable_ops[cpu]) {
+		if (!smp_ops[cpu]) {
 			pr_err("%s: invalid enable-method property: %s\n",
 			       dn->full_name, enable_method);
 			goto next;
 		}
 
-		if (smp_enable_ops[cpu]->init_cpu(dn, cpu))
+		if (smp_ops[cpu]->cpu_init(dn, cpu))
 			goto next;
 
 		pr_debug("cpu logical map 0x%llx\n", hwid);
@@ -380,8 +421,8 @@ next:
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	int cpu, err;
-	unsigned int ncores = num_possible_cpus();
+	int err;
+	unsigned int cpu, ncores = num_possible_cpus();
 
 	/*
 	 * are we trying to boot more cores than exist?
@@ -408,10 +449,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		if (cpu == smp_processor_id())
 			continue;
 
-		if (!smp_enable_ops[cpu])
+		if (!smp_ops[cpu])
 			continue;
 
-		err = smp_enable_ops[cpu]->prepare_cpu(cpu);
+		err = smp_ops[cpu]->cpu_prepare(cpu);
 		if (err)
 			continue;
 
diff --git a/arch/arm64/kernel/smp_psci.c b/arch/arm64/kernel/smp_psci.c
index 0c533301be77..e9e5890a26f5 100644
--- a/arch/arm64/kernel/smp_psci.c
+++ b/arch/arm64/kernel/smp_psci.c
@@ -23,31 +23,63 @@
 #include <asm/psci.h>
 #include <asm/smp_plat.h>
 
-static int __init smp_psci_init_cpu(struct device_node *dn, int cpu)
+static int smp_psci_cpu_init(struct device_node *dn, unsigned int cpu)
 {
 	return 0;
 }
 
-static int __init smp_psci_prepare_cpu(int cpu)
+static int smp_psci_cpu_prepare(unsigned int cpu)
 {
-	int err;
-
 	if (!psci_ops.cpu_on) {
 		pr_err("psci: no cpu_on method, not booting CPU%d\n", cpu);
 		return -ENODEV;
 	}
 
-	err = psci_ops.cpu_on(cpu_logical_map(cpu), __pa(secondary_holding_pen));
-	if (err) {
+	return 0;
+}
+
+static int smp_psci_cpu_boot(unsigned int cpu)
+{
+	int err = psci_ops.cpu_on(cpu_logical_map(cpu), __pa(secondary_entry));
+	if (err)
 		pr_err("psci: failed to boot CPU%d (%d)\n", cpu, err);
-		return err;
-	}
 
+	return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int smp_psci_cpu_disable(unsigned int cpu)
+{
+	/* Fail early if we don't have CPU_OFF support */
+	if (!psci_ops.cpu_off)
+		return -EOPNOTSUPP;
 	return 0;
 }
 
-const struct smp_enable_ops smp_psci_ops __initconst = {
+static void smp_psci_cpu_die(unsigned int cpu)
+{
+	int ret;
+	/*
+	 * There are no known implementations of PSCI actually using the
+	 * power state field, pass a sensible default for now.
+	 */
+	struct psci_power_state state = {
+		.type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+	};
+
+	ret = psci_ops.cpu_off(state);
+
+	pr_crit("psci: unable to power off CPU%u (%d)\n", cpu, ret);
+}
+#endif
+
+const struct smp_operations smp_psci_ops = {
 	.name		= "psci",
-	.init_cpu	= smp_psci_init_cpu,
-	.prepare_cpu	= smp_psci_prepare_cpu,
+	.cpu_init	= smp_psci_cpu_init,
+	.cpu_prepare	= smp_psci_cpu_prepare,
+	.cpu_boot	= smp_psci_cpu_boot,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable	= smp_psci_cpu_disable,
+	.cpu_die	= smp_psci_cpu_die,
+#endif
 };
diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c
index 7c35fa682f76..87af6bb551a7 100644
--- a/arch/arm64/kernel/smp_spin_table.c
+++ b/arch/arm64/kernel/smp_spin_table.c
@@ -16,15 +16,38 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/smp_plat.h>
+
+extern void secondary_holding_pen(void);
+volatile unsigned long secondary_holding_pen_release = INVALID_HWID;
 
 static phys_addr_t cpu_release_addr[NR_CPUS];
+static DEFINE_RAW_SPINLOCK(boot_lock);
 
-static int __init smp_spin_table_init_cpu(struct device_node *dn, int cpu)
+/*
+ * Write secondary_holding_pen_release in a way that is guaranteed to be
+ * visible to all observers, irrespective of whether they're taking part
+ * in coherency or not.  This is necessary for the hotplug code to work
+ * reliably.
+ */
+static void write_pen_release(u64 val)
+{
+	void *start = (void *)&secondary_holding_pen_release;
+	unsigned long size = sizeof(secondary_holding_pen_release);
+
+	secondary_holding_pen_release = val;
+	__flush_dcache_area(start, size);
+}
+
+
+static int smp_spin_table_cpu_init(struct device_node *dn, unsigned int cpu)
 {
 	/*
 	 * Determine the address from which the CPU is polling.
@@ -40,7 +63,7 @@ static int __init smp_spin_table_init_cpu(struct device_node *dn, int cpu)
 	return 0;
 }
 
-static int __init smp_spin_table_prepare_cpu(int cpu)
+static int smp_spin_table_cpu_prepare(unsigned int cpu)
 {
 	void **release_addr;
 
@@ -59,8 +82,60 @@ static int __init smp_spin_table_prepare_cpu(int cpu)
 	return 0;
 }
 
-const struct smp_enable_ops smp_spin_table_ops __initconst = {
+static int smp_spin_table_cpu_boot(unsigned int cpu)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	raw_spin_lock(&boot_lock);
+
+	/*
+	 * Update the pen release flag.
+	 */
+	write_pen_release(cpu_logical_map(cpu));
+
+	/*
+	 * Send an event, causing the secondaries to read pen_release.
+	 */
+	sev();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (secondary_holding_pen_release == INVALID_HWID)
+			break;
+		udelay(10);
+	}
+
+	/*
+	 * Now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	raw_spin_unlock(&boot_lock);
+
+	return secondary_holding_pen_release != INVALID_HWID ? -ENOSYS : 0;
+}
+
+void smp_spin_table_cpu_postboot(void)
+{
+	/*
+	 * Let the primary processor know we're out of the pen.
+	 */
+	write_pen_release(INVALID_HWID);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	raw_spin_lock(&boot_lock);
+	raw_spin_unlock(&boot_lock);
+}
+
+const struct smp_operations smp_spin_table_ops = {
 	.name		= "spin-table",
-	.init_cpu 	= smp_spin_table_init_cpu,
-	.prepare_cpu	= smp_spin_table_prepare_cpu,
+	.cpu_init	= smp_spin_table_cpu_init,
+	.cpu_prepare	= smp_spin_table_cpu_prepare,
+	.cpu_boot	= smp_spin_table_cpu_boot,
+	.cpu_postboot	= smp_spin_table_cpu_postboot,
 };
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index f8ab9d8e2ea3..991ffddf49df 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -54,7 +54,6 @@ SECTIONS
 	}
 	.text : {			/* Real text segment		*/
 		_stext = .;		/* Text and read-only data	*/
-			*(.smp.pen.text)
 			__exception_text_start = .;
 			*(.exception.text)
 			__exception_text_end = .;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 914a22080953..ff1aa6c2ff97 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -319,7 +319,7 @@ config FB_PM2_FIFO_DISCONNECT
 
 config FB_ARMCLCD
 	tristate "ARM PrimeCell PL110 support"
-	depends on FB && ARM && ARM_AMBA
+	depends on FB && (ARM || ARM64) && ARM_AMBA
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT