diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8450-qrd.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 94 |
1 files changed, 89 insertions, 5 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index e58fc7399799..017bc48430ba 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -7,6 +7,13 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8450.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8450 QRD"; @@ -14,6 +21,7 @@ aliases { serial0 = &uart7; + serial1 = &uart20; }; chosen { @@ -29,6 +37,24 @@ regulator-always-on; regulator-boot-on; }; + + wcn6856: wcn6856 { + compatible = "qcom,wcn6855"; + #power-domain-cells = <0>; + + vddaon-supply = <&vreg_s11b_0p95>; + vddcx-supply = <&vreg_s11b_0p95>; + vddmx-supply = <&vreg_s2e_0p85>; + vddrfa1-supply = <&vreg_s1c_1p86>; + vddrfa2-supply = <&vreg_s12b_1p25>; + vddio-supply = <&vreg_s10b_1p8>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_state &xo_clk_state>; + + xo-clk-gpios = <&tlmm 204 GPIO_ACTIVE_HIGH>; + wlan-en-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; + }; }; &apps_rsc { @@ -63,13 +89,13 @@ vreg_s11b_0p95: smps11 { regulator-name = "vreg_s11b_0p95"; - regulator-min-microvolt = <848000>; + regulator-min-microvolt = <966000>; regulator-max-microvolt = <1104000>; }; vreg_s12b_1p25: smps12 { regulator-name = "vreg_s12b_1p25"; - regulator-min-microvolt = <1224000>; + regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1400000>; }; @@ -147,7 +173,7 @@ vreg_s1c_1p86: smps1 { regulator-name = "vreg_s1c_1p86"; - regulator-min-microvolt = <1800000>; + regulator-min-microvolt = <1900000>; regulator-max-microvolt = <2024000>; }; @@ -300,8 +326,8 @@ vreg_s2e_0p85: smps2 { regulator-name = "vreg_s2e_0p85"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1040000>; + regulator-min-microvolt = <1012000>; + regulator-max-microvolt = <1012000>; }; vreg_l1e_0p8: ldo1 { @@ -339,17 +365,26 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + + vreg_l7e_2p8: ldo7 { + regulator-name = "vreg_l7e_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; }; }; &pcie0 { status = "okay"; + max-link-speed = <2>; }; &pcie0_phy { status = "okay"; vdda-phy-supply = <&vreg_l5b_0p88>; vdda-pll-supply = <&vreg_l6b_1p2>; + + power-domains = <&wcn6856>; }; &gpi_dma0 { @@ -368,6 +403,10 @@ status = "okay"; }; +&qupv3_id_2 { + status = "okay"; +}; + &remoteproc_adsp { status = "okay"; firmware-name = "qcom/sm8450/adsp.mbn"; @@ -402,12 +441,57 @@ &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; + + bt_en_state: bt-default-state { + bt-en { + pins = "gpio81"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-up; + }; + }; + + xo_clk_state: xo_clk_state { + pinconf { + pins = "gpio204"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-down; + }; + }; + + wlan_en_state: wlan_en_state { + pinconf { + pins = "gpio80"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-down; + }; + }; }; &uart7 { status = "okay"; }; +&uart20 { + status = "okay"; + bluetooth { + /* a little lie */ + compatible = "qcom,wcn6855-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>; + power-domains = <&wcn6856>; + enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + }; +}; + &ufs_mem_hc { status = "okay"; |