diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8250-mtp.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 417 |
1 files changed, 408 insertions, 9 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index cff7a85890ee..f9c750cdf6b1 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -7,19 +7,121 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" / { model = "Qualcomm Technologies, Inc. SM8250 MTP"; compatible = "qcom,sm8250-mtp"; aliases { - serial0 = &uart2; + serial0 = &uart12; }; chosen { stdout-path = "serial0:115200n8"; }; + thermal-zones { + xo-therm { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 0>; + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-therm { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 1>; + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa1 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-therm { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + camera-therm { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-msm-therm { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa2 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -49,6 +151,25 @@ regulator-always-on; vin-supply = <&vph_pwr>; }; + + display_panel_avdd: display_gpio_regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "display_panel_avdd"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 61 0>; + enable-active-high; + regulator-boot-on; + pinctrl-names = "default"; + pinctrl-0 = <&display_panel_avdd_default>; + }; + +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/sm8250/adsp.mdt"; }; &apps_rsc { @@ -136,13 +257,6 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - vreg_l11a_0p75: ldo11 { - regulator-name = "vreg_l11a_0p75"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vreg_l12a_1p8: ldo12 { regulator-name = "vreg_l12a_1p8"; regulator-min-microvolt = <1800000>; @@ -184,6 +298,13 @@ regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; }; pm8150l-rpmh-regulators { @@ -351,11 +472,243 @@ }; }; +&dsi0 { + status = "okay"; + vdda-supply = <&display_panel_avdd>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + port@1 { + endpoint { + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l5a_0p875>; +}; + +#if 0 +&dsi1 { + status = "okay"; + vdda-supply = <&display_panel_avdd>; + + ports { + port@1 { + endpoint { + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi1_phy { + status = "okay"; + vdds-supply = <&vreg_l5a_0p875>; +}; +#endif + +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/a650_zap.mdt"; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <1000000>; + + /* NQ NFC chip @28 */ +}; + +&i2c13 { + status = "okay"; + + /* st,stmfts @ 49 */ +}; + +&i2c15 { + status = "okay"; + + /* smb1390 @ 10 */ + /* rtc6226 @ 64 */ +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pm8150_adc { + xo-therm@4c { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-therm@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm1@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc { + conn-therm@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150l_adc { + camera-flash-therm@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-msm-therm@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm2@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150_adc_tm { + status = "okay"; + io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>, + <&pm8150_adc ADC5_AMUX_THM1_100K_PU>, + <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; + io-channel-names = "xo-therm", "skin-therm", "pa-therm1"; + + xo-therm@0 { + reg = <0>; + qcom,adc-channel = <ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-therm@1 { + reg = <1>; + qcom,adc-channel = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm1@2 { + reg = <2>; + qcom,adc-channel = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc_tm { + status = "okay"; + io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>; + io-channel-names = "conn-therm"; + + conn-therm@0 { + reg = <0>; + qcom,adc-channel = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150l_adc_tm { + status = "okay"; + io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>, + <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>, + <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>; + io-channel-names = "camera-flash-therm", "skin-msm-therm", "pa-therm2"; + + camera-flash-therm@0 { + reg = <0>; + qcom,adc-channel = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-msm-therm@1 { + reg = <1>; + qcom,adc-channel = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm2@2 { + reg = <2>; + qcom,adc-channel = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8250/cdsp.mbn"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; -&uart2 { +&qupv3_id_2 { + status = "okay"; +}; + +&slpi { + status = "okay"; + firmware-name = "qcom/sm8250/slpi.mbn"; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <40 4>; + + display_panel_avdd_default: display_panel_avdd_default { + mux { + pins = "gpio61"; + function = "gpio"; + }; + + config { + pins = "gpio61"; + drive-strength = <8>; + bias-disable = <0>; + output-high; + }; + }; + +}; + +&uart12 { status = "okay"; }; @@ -378,3 +731,49 @@ vdda-pll-supply = <&vreg_l9a_1p2>; vdda-pll-max-microamp = <19000>; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; |