diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound/qcom,wcd9335.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/sound/qcom,wcd9335.txt | 30 |
1 files changed, 25 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt index 1d8d49e30af7..4d56c3ca9fa8 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt +++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt @@ -34,12 +34,12 @@ Required properties with SLIMbus Interface: Definition: Interrupt names of WCD INTR1 and INTR2 Should be: "intr1", "intr2" -- reset-gpio: +- reset-gpios: Usage: required Value type: <String Array> Definition: Reset gpio line -- qcom,ifd: +- slim-ifc-dev: Usage: required Value type: <phandle> Definition: SLIM interface device @@ -55,6 +55,26 @@ Required properties with SLIMbus Interface: Value type: <string> Definition: Must contain "mclk", "mclk2" and "slimbus" strings. +- qcom,mbhc-vthreshold: + Usage: Optional, only required if headset button support required. + Value type: <u32 array> + Definition: Must contain an array of 8 threshold voltages in mV for + 8 buttons detection on headset. + +- qcom,hphl-jack-type-normally-open: + Usage: Optional, only required if headset button support required. + Value type: <boolean> + Definition: present if hphl pin on jack is a NO (Normally Open). + If not specified, then its assumed that hphl pin on jack + is NC (Normally Closed). + +- qcom,gnd-jack-type-normally-open: + Usage: Optional, only required if headset button support required. + Value type: <boolean> + Definition: present if gnd pin on jack is NO (Normally Open). + If not specified, then its assumed that gnd pin on + jack is NC (Normally Closed). + - vdd-buck-supply: Usage: required Value type: <phandle> @@ -104,13 +124,13 @@ Required properties with SLIMbus Interface: Value type: <u32> Definition: Must be 1 -codec@1{ +audio-codec@1{ compatible = "slim217,1a0"; reg = <1 0>; interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr2" - reset-gpio = <&msmgpio 64 0>; - qcom,ifd = <&wc9335_ifd>; + reset-gpios = <&msmgpio 64 0>; + slim-ifc-dev = <&wc9335_ifd>; clock-names = "mclk", "native"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>, <&rpmcc RPM_SMD_BB_CLK1>; |