Merge remote-tracking branch 'fixes/tracking-qcomlt-fixes-without-devfreq-reverts' into integration-linux-qcomlt

6 files changed, 32 insertions, 13 deletions

diff --git a/drivers/clk/qcom/mmcc-msm8996.c b/drivers/clk/qcom/mmcc-msm8996.c
index 6c7592ddf8bb..dcf3026e0466 100644
--- a/drivers/clk/qcom/mmcc-msm8996.c
+++ b/drivers/clk/qcom/mmcc-msm8996.c
@@ -3045,16 +3045,6 @@ static struct gdsc mdss_gdsc = {
 	.pwrsts = PWRSTS_OFF_ON,
 };
 
-static struct gdsc gpu_gdsc = {
-	.gdscr = 0x4034,
-	.gds_hw_ctrl = 0x4038,
-	.pd = {
-		.name = "gpu",
-	},
-	.pwrsts = PWRSTS_OFF_ON,
-	.flags = VOTABLE,
-};
-
 static struct gdsc gpu_gx_gdsc = {
 	.gdscr = 0x4024,
 	.clamp_io_ctrl = 0x4300,
@@ -3067,6 +3057,17 @@ static struct gdsc gpu_gx_gdsc = {
 	.flags = CLAMP_IO,
 };
 
+static struct gdsc gpu_gdsc = {
+	.gdscr = 0x4034,
+	.gds_hw_ctrl = 0x4038,
+	.pd = {
+		.name = "gpu",
+	},
+	.parent = &gpu_gx_gdsc.pd,
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
 static struct clk_regmap *mmcc_msm8996_clocks[] = {
 	[MMPLL0_EARLY] = &mmpll0_early.clkr,
 	[MMPLL0_PLL] = &mmpll0.clkr,
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index e247d6942a49..af9072ace23c 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -39,6 +39,8 @@ void msm_hdmi_set_mode(struct hdmi *hdmi, bool power_on)
 		}
 	} else {
 		ctrl = HDMI_CTRL_HDMI;
+		if (hdmi->config->keep_ctrl_on)
+			ctrl |= HDMI_CTRL_ENABLE;
 	}
 
 	hdmi_write(hdmi, REG_HDMI_CTRL, ctrl);
@@ -420,6 +422,7 @@ static struct hdmi_platform_config hdmi_tx_8996_config = {
 		HDMI_CFG(pwr_clk, 8x74),
 		HDMI_CFG(hpd_clk, 8x74),
 		.hpd_freq      = hpd_clk_freq_8x74,
+		.keep_ctrl_on  = true,
 };
 
 static const struct {
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 5c5df6ab2a57..342103d7d91e 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -121,6 +121,9 @@ struct hdmi_platform_config {
 
 	/* gpio's: */
 	struct hdmi_gpio_data gpios[HDMI_MAX_NUM_GPIO];
+
+	/* caps, etc. */
+	bool keep_ctrl_on;
 };
 
 void msm_hdmi_set_mode(struct hdmi *hdmi, bool power_on);
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
index a6eeab2c4dc3..151c8549173f 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
@@ -224,6 +224,13 @@ int msm_hdmi_hpd_enable(struct drm_connector *connector)
 			HDMI_HPD_CTRL_ENABLE | hpd_ctrl);
 	spin_unlock_irqrestore(&hdmi->reg_lock, flags);
 
+	/*
+	 * wait for a bit so that HPD is sensed if there is a cable already
+	 * connected. Returning early will result in someone calling the
+	 * connnector func's detect() callback too early
+	 */
+	msleep(15);
+
 	return 0;
 
 fail:
@@ -465,8 +472,7 @@ struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi)
 			DRM_MODE_CONNECTOR_HDMIA);
 	drm_connector_helper_add(connector, &msm_hdmi_connector_helper_funcs);
 
-	connector->polled = DRM_CONNECTOR_POLL_CONNECT |
-			DRM_CONNECTOR_POLL_DISCONNECT;
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
 
 	connector->interlace_allowed = 0;
 	connector->doublescan_allowed = 0;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 356833a606d5..4b5ef3c96e7d 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -221,6 +221,7 @@ static struct variant_data variant_ux500v2 = {
 	.start_err		= MCI_STARTBITERR,
 	.opendrain		= MCI_OD,
 	.init			= ux500v2_variant_init,
+	.any_blksize		= true,
 };
 
 static struct variant_data variant_stm32 = {
@@ -292,6 +293,7 @@ static struct variant_data variant_qcom = {
 	.start_err		= MCI_STARTBITERR,
 	.opendrain		= MCI_ROD,
 	.init			= qcom_variant_init,
+	.any_blksize		= true,
 };
 
 /* Busy detection for the ST Micro variant */
@@ -450,10 +452,12 @@ void mmci_dma_setup(struct mmci_host *host)
 static int mmci_validate_data(struct mmci_host *host,
 			      struct mmc_data *data)
 {
+	struct variant_data *variant = host->variant;
+
 	if (!data)
 		return 0;
 
-	if (!is_power_of_2(data->blksz)) {
+	if (!is_power_of_2(data->blksz) && !variant->any_blksize) {
 		dev_err(mmc_dev(host->mmc),
 			"unsupported block size (%d bytes)\n", data->blksz);
 		return -EINVAL;
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 4f071bd34e59..a7dc2c0e095a 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -308,6 +308,7 @@ struct mmci_host;
  * @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register
  * @dma_lli: true if variant has dma link list feature.
  * @stm32_idmabsize_mask: stm32 sdmmc idma buffer size.
+ * @any_blksize: true if block any sizes are supported
  */
 struct variant_data {
 	unsigned int		clkreg;
@@ -350,6 +351,7 @@ struct variant_data {
 	u32			opendrain;
 	u8			dma_lli:1;
 	u32			stm32_idmabsize_mask;
+	bool			any_blksize;
 	void (*init)(struct mmci_host *host);
 };