Merge remote-tracking branch 'tsens-thermal/integration/thermal-automerge' into integration-linux-qcomlt

20 files changed, 809 insertions, 116 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
index c81993f8d8c3..c8787688122a 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
@@ -13,6 +13,7 @@ VADC node:
     Definition: Should contain "qcom,spmi-vadc".
                 Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
                 Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
+                Should contain "qcom,pms405-adc" for PMS405 PMIC
 
 - reg:
     Usage: required
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 1d9e8cf61018..799de3062352 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -8,9 +8,12 @@ Required properties:
     - "qcom,msm8996-tsens" (MSM8996)
     - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
     - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
+    - "qcom,qcs404-tsens", "qcom,tsens-v1" (QCS404)
   The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
   with version 2 of the TSENS IP. MSM8996 is the only exception because the
   generic property did not exist when support was added.
+  Similarly, the generic "qcom,tsens-v1" property must be used as a fallback for
+  any SoC with version 1 of the TSENS IP.
 
 - reg: Address range of the thermal registers.
   New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index ad2b62dfc9f6..dd9f4cf425d6 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -3,6 +3,32 @@
 
 #include <dt-bindings/spmi/spmi.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pms405 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pms405_temp>;
+
+			trips {
+				pm8998_alert0: pms405-alert0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pm8998_crit: pms405-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
 
 &spmi_bus {
 	pms405_0: pms405@0 {
@@ -45,6 +71,59 @@
 			};
 		};
 
+		pms405_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pms405_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pms405_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			ref_gnd {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vref_1p25 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vph_pwr {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+			};
+
+			die_temp {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			xo_therm_100k_pu {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			amux_thm1_100k_pu {
+				reg = <ADC5_AMUX_THM1_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			amux_thm3_100k_pu {
+				reg = <ADC5_AMUX_THM3_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+			};
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index bd9a54349d66..da38a97730f1 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -30,6 +30,7 @@
 			reg = <0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU1: cpu@101 {
@@ -38,6 +39,7 @@
 			reg = <0x101>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU2: cpu@102 {
@@ -46,6 +48,7 @@
 			reg = <0x102>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU3: cpu@103 {
@@ -54,6 +57,7 @@
 			reg = <0x103>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		L2_0: l2-cache {
@@ -318,6 +322,16 @@
 			reg = <0x00060000 0x6000>;
 		};
 
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			tsens_caldata: caldata@d0 {
+				reg = <0x1f8 0x14>;
+			};
+		};
+
 		rng: rng@e3000 {
 			compatible = "qcom,prng-ee";
 			reg = <0x000e3000 0x1000>;
@@ -325,6 +339,16 @@
 			clock-names = "core";
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_caldata>;
+			nvmem-cell-names = "calib";
+			#qcom,sensors = <10>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,qcs404-pinctrl";
 			reg = <0x01000000 0x200000>,
@@ -552,4 +576,206 @@
 			#interrupt-cells = <2>;
 		};
 	};
+
+	thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				aoss_crit: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				dsp_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				dsp_crit: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		lpass-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				lpass_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				lpass_crit: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				wlan_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				wlan_crit: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cluster_alert: cluster_alert {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cluster_crit: cluster_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: cpu_crit0 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 6ac14c48b012..3dc5da799749 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -131,7 +132,10 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
 			L2_0: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -146,7 +150,10 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
 			L2_100: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -158,7 +165,10 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
 			L2_200: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -170,7 +180,10 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
 			L2_300: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -182,7 +195,10 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
 			L2_400: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -194,7 +210,10 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
 			L2_500: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -206,7 +225,10 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
 			L2_600: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -218,7 +240,10 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
 			L2_700: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -1904,6 +1929,18 @@
 				status = "disabled";
 			};
 		};
+
+		cpufreq_hw: cpufreq@17d43000 {
+			compatible = "qcom,cpufreq-hw";
+
+			reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
 	};
 
 	thermal-zones {
@@ -1914,18 +1951,41 @@
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
-				cpu_alert0: trip0 {
+				cpu0_alert1: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit0: trip1 {
+				cpu0_alert0: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu1-thermal {
@@ -1935,18 +1995,41 @@
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
-				cpu_alert1: trip0 {
+				cpu1_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit1: trip1 {
+				cpu1_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu2-thermal {
@@ -1956,18 +2039,41 @@
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				cpu_alert2: trip0 {
+				cpu2_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit2: trip1 {
+				cpu2_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu3-thermal {
@@ -1977,18 +2083,41 @@
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
-				cpu_alert3: trip0 {
+				cpu3_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit3: trip1 {
+				cpu3_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu4-thermal {
@@ -1998,18 +2127,41 @@
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
-				cpu_alert4: trip0 {
+				cpu4_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit4: trip1 {
+				cpu4_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu5-thermal {
@@ -2019,18 +2171,41 @@
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				cpu_alert5: trip0 {
+				cpu5_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit5: trip1 {
+				cpu5_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu6-thermal {
@@ -2040,18 +2215,41 @@
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
-				cpu_alert6: trip0 {
+				cpu6_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit6: trip1 {
+				cpu6_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu7-thermal {
@@ -2061,18 +2259,41 @@
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				cpu_alert7: trip0 {
+				cpu7_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit7: trip1 {
+				cpu7_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 };
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index e58bfcb1169e..2a4c4ea7980b 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -13,7 +13,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu.h>
-#include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/err.h>
@@ -30,7 +29,6 @@
 struct private_data {
 	struct opp_table *opp_table;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 	const char *reg_name;
 	bool have_static_opps;
 };
@@ -301,7 +299,6 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct private_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	if (priv->have_static_opps)
 		dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
@@ -314,21 +311,14 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct private_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver dt_cpufreq_driver = {
-	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		 CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = set_target,
 	.get = cpufreq_generic_get,
 	.init = cpufreq_init,
 	.exit = cpufreq_exit,
-	.ready = cpufreq_ready,
 	.name = "cpufreq-dt",
 	.attr = cpufreq_dt_attr,
 	.suspend = cpufreq_generic_suspend,
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index e35a886e00bc..cf1be057caf4 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1318,6 +1318,9 @@ static int cpufreq_online(unsigned int cpu)
 	if (cpufreq_driver->ready)
 		cpufreq_driver->ready(policy);
 
+	if (cpufreq_driver->flags & CPUFREQ_AUTO_REGISTER_COOLING_DEV)
+		register_cooling_device(policy);
+
 	pr_debug("initialization complete\n");
 
 	return 0;
@@ -1405,6 +1408,9 @@ static int cpufreq_offline(unsigned int cpu)
 		goto unlock;
 	}
 
+	if (cpufreq_driver->flags & CPUFREQ_AUTO_REGISTER_COOLING_DEV)
+		unregister_cooling_device(policy);
+
 	if (cpufreq_driver->stop_cpu)
 		cpufreq_driver->stop_cpu(policy);
 
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 9fedf627e000..9935df234fa1 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -9,7 +9,6 @@
 #include <linux/clk.h>
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
-#include <linux/cpu_cooling.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
@@ -52,7 +51,6 @@ static struct clk_bulk_data clks[] = {
 };
 
 static struct device *cpu_dev;
-static struct thermal_cooling_device *cdev;
 static bool free_opp;
 static struct cpufreq_frequency_table *freq_table;
 static unsigned int max_freq;
@@ -193,16 +191,6 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 	return 0;
 }
 
-static void imx6q_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	cdev = of_cpufreq_cooling_register(policy);
-
-	if (!cdev)
-		dev_err(cpu_dev,
-			"running cpufreq without cooling device: %ld\n",
-			PTR_ERR(cdev));
-}
-
 static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret;
@@ -214,22 +202,14 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 	return ret;
 }
 
-static int imx6q_cpufreq_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_cooling_unregister(cdev);
-
-	return 0;
-}
-
 static struct cpufreq_driver imx6q_cpufreq_driver = {
-	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		 CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = imx6q_set_target,
 	.get = cpufreq_generic_get,
 	.init = imx6q_cpufreq_init,
-	.exit = imx6q_cpufreq_exit,
 	.name = "imx6q-cpufreq",
-	.ready = imx6q_cpufreq_ready,
 	.attr = cpufreq_generic_attr,
 	.suspend = cpufreq_generic_suspend,
 };
diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index eb8920d39818..9a937f4c63e7 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -14,7 +14,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu.h>
-#include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/module.h>
@@ -48,7 +47,6 @@ struct mtk_cpu_dvfs_info {
 	struct regulator *sram_reg;
 	struct clk *cpu_clk;
 	struct clk *inter_clk;
-	struct thermal_cooling_device *cdev;
 	struct list_head list_head;
 	int intermediate_voltage;
 	bool need_voltage_tracking;
@@ -307,13 +305,6 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
 
 #define DYNAMIC_POWER "dynamic-power-coefficient"
 
-static void mtk_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct mtk_cpu_dvfs_info *info = policy->driver_data;
-
-	info->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 {
 	struct device *cpu_dev;
@@ -472,7 +463,6 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct mtk_cpu_dvfs_info *info = policy->driver_data;
 
-	cpufreq_cooling_unregister(info->cdev);
 	dev_pm_opp_free_cpufreq_table(info->cpu_dev, &policy->freq_table);
 
 	return 0;
@@ -480,13 +470,13 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
 
 static struct cpufreq_driver mtk_cpufreq_driver = {
 	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
-		 CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+		 CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+		 CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = mtk_cpufreq_set_target,
 	.get = cpufreq_generic_get,
 	.init = mtk_cpufreq_init,
 	.exit = mtk_cpufreq_exit,
-	.ready = mtk_cpufreq_ready,
 	.name = "mtk-cpufreq",
 	.attr = cpufreq_generic_attr,
 };
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index d83939a1b3d4..47c7cea22da1 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -231,7 +231,8 @@ static struct freq_attr *qcom_cpufreq_hw_attr[] = {
 
 static struct cpufreq_driver cpufreq_qcom_hw_driver = {
 	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
-			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+			  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= qcom_cpufreq_hw_target_index,
 	.get		= qcom_cpufreq_hw_get,
@@ -296,7 +297,7 @@ static int __init qcom_cpufreq_hw_init(void)
 {
 	return platform_driver_register(&qcom_cpufreq_hw_driver);
 }
-subsys_initcall(qcom_cpufreq_hw_init);
+device_initcall(qcom_cpufreq_hw_init);
 
 static void __exit qcom_cpufreq_hw_exit(void)
 {
diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c
index 3d773f64b4df..b206e6cb55f0 100644
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -13,7 +13,6 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/cpufreq.h>
-#include <linux/cpu_cooling.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -31,7 +30,6 @@
 struct cpu_data {
 	struct clk **pclk;
 	struct cpufreq_frequency_table *table;
-	struct thermal_cooling_device *cdev;
 };
 
 /*
@@ -239,7 +237,6 @@ static int qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
 	struct cpu_data *data = policy->driver_data;
 
-	cpufreq_cooling_unregister(data->cdev);
 	kfree(data->pclk);
 	kfree(data->table);
 	kfree(data);
@@ -258,23 +255,15 @@ static int qoriq_cpufreq_target(struct cpufreq_policy *policy,
 	return clk_set_parent(policy->clk, parent);
 }
 
-
-static void qoriq_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct cpu_data *cpud = policy->driver_data;
-
-	cpud->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver qoriq_cpufreq_driver = {
 	.name		= "qoriq_cpufreq",
-	.flags		= CPUFREQ_CONST_LOOPS,
+	.flags		= CPUFREQ_CONST_LOOPS |
+			  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.init		= qoriq_cpufreq_cpu_init,
 	.exit		= qoriq_cpufreq_cpu_exit,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= qoriq_cpufreq_target,
 	.get		= cpufreq_generic_get,
-	.ready		= qoriq_cpufreq_ready,
 	.attr		= cpufreq_generic_attr,
 };
 
diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 242c3370544e..b19e9d129f8f 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -11,7 +11,6 @@
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/pm_opp.h>
@@ -22,7 +21,6 @@
 struct scmi_data {
 	int domain_id;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 };
 
 static const struct scmi_handle *handle;
@@ -185,7 +183,6 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct scmi_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	kfree(priv);
 	dev_pm_opp_remove_all_dynamic(priv->cpu_dev);
@@ -193,17 +190,11 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void scmi_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct scmi_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver scmi_cpufreq_driver = {
 	.name	= "scmi",
 	.flags	= CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
-		  CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+		  CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify	= cpufreq_generic_frequency_table_verify,
 	.attr	= cpufreq_generic_attr,
 	.target_index	= scmi_cpufreq_set_target,
@@ -211,7 +202,6 @@ static struct cpufreq_driver scmi_cpufreq_driver = {
 	.get	= scmi_cpufreq_get_rate,
 	.init	= scmi_cpufreq_init,
 	.exit	= scmi_cpufreq_exit,
-	.ready	= scmi_cpufreq_ready,
 };
 
 static int scmi_cpufreq_probe(struct scmi_device *sdev)
diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c
index 99449738faa4..82420e8e5f0d 100644
--- a/drivers/cpufreq/scpi-cpufreq.c
+++ b/drivers/cpufreq/scpi-cpufreq.c
@@ -22,7 +22,6 @@
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
@@ -34,7 +33,6 @@
 struct scpi_data {
 	struct clk *clk;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 };
 
 static struct scpi_ops *scpi_ops;
@@ -186,7 +184,6 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct scpi_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	clk_put(priv->clk);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	kfree(priv);
@@ -195,23 +192,16 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void scpi_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct scpi_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver scpi_cpufreq_driver = {
 	.name	= "scpi-cpufreq",
 	.flags	= CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
-		  CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+		  CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify	= cpufreq_generic_frequency_table_verify,
 	.attr	= cpufreq_generic_attr,
 	.get	= scpi_cpufreq_get_rate,
 	.init	= scpi_cpufreq_init,
 	.exit	= scpi_cpufreq_exit,
-	.ready	= scpi_cpufreq_ready,
 	.target_index	= scpi_cpufreq_set_target,
 };
 
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 30323426902e..58bb7d72dc2b 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -152,6 +152,7 @@ config CPU_THERMAL
 	bool "generic cpu cooling support"
 	depends on CPU_FREQ
 	depends on THERMAL_OF
+	depends on THERMAL=y
 	help
 	  This implements the generic cpu cooling mechanism through frequency
 	  reduction. An ACPI version of this already exists
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index 717a08600bb5..29c7993e9d42 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -1,3 +1,3 @@
 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
-qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o
+qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o tsens-v1.o
 obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 78652cac7f3d..29db8aec1943 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -76,7 +76,7 @@ void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1,
 	}
 }
 
-static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
+int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
 {
 	int degc, num, den;
 
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
new file mode 100644
index 000000000000..1dbf4fde6da8
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include "tsens.h"
+
+/* eeprom layout data for qcs404 (v1) */
+#define BASE0_MASK	0x000007f8
+#define BASE1_MASK	0x0007f800
+#define BASE0_SHIFT	3
+#define BASE1_SHIFT	11
+
+#define S0_P1_MASK	0x0000003f
+#define S1_P1_MASK	0x0003f000
+#define S2_P1_MASK	0x3f000000
+#define S3_P1_MASK	0x000003f0
+#define S4_P1_MASK	0x003f0000
+#define S5_P1_MASK	0x0000003f
+#define S6_P1_MASK	0x0003f000
+#define S7_P1_MASK	0x3f000000
+#define S8_P1_MASK	0x000003f0
+#define S9_P1_MASK	0x003f0000
+
+#define S0_P2_MASK	0x00000fc0
+#define S1_P2_MASK	0x00fc0000
+#define S2_P2_MASK_1_0	0xc0000000
+#define S2_P2_MASK_5_2	0x0000000f
+#define S3_P2_MASK	0x0000fc00
+#define S4_P2_MASK	0x0fc00000
+#define S5_P2_MASK	0x00000fc0
+#define S6_P2_MASK	0x00fc0000
+#define S7_P2_MASK_1_0	0xc0000000
+#define S7_P2_MASK_5_2	0x0000000f
+#define S8_P2_MASK	0x0000fc00
+#define S9_P2_MASK	0x0fc00000
+
+#define S0_P1_SHIFT	0
+#define S0_P2_SHIFT	6
+#define S1_P1_SHIFT	12
+#define S1_P2_SHIFT	18
+#define S2_P1_SHIFT	24
+#define S2_P2_SHIFT_1_0	30
+
+#define S2_P2_SHIFT_5_2	0
+#define S3_P1_SHIFT	4
+#define S3_P2_SHIFT	10
+#define S4_P1_SHIFT	16
+#define S4_P2_SHIFT	22
+
+#define S5_P1_SHIFT	0
+#define S5_P2_SHIFT	6
+#define S6_P1_SHIFT	12
+#define S6_P2_SHIFT	18
+#define S7_P1_SHIFT	24
+#define S7_P2_SHIFT_1_0	30
+
+#define S7_P2_SHIFT_5_2	0
+#define S8_P1_SHIFT	4
+#define S8_P2_SHIFT	10
+#define S9_P1_SHIFT	16
+#define S9_P2_SHIFT	22
+
+#define CAL_SEL_MASK	7
+#define CAL_SEL_SHIFT	0
+
+static int calibrate_v1(struct tsens_device *tmdev)
+{
+	u32 base0 = 0, base1 = 0;
+	u32 p1[10], p2[10];
+	u32 mode = 0, lsb = 0, msb = 0;
+	u32 *qfprom_cdata;
+	int i;
+
+	qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib");
+	if (IS_ERR(qfprom_cdata))
+		return PTR_ERR(qfprom_cdata);
+
+	mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
+	dev_dbg(tmdev->dev, "calibration mode is %d\n", mode);
+
+	switch (mode) {
+	case TWO_PT_CALIB:
+		base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT;
+		p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
+		p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
+		/* This value is split over two registers, 2 bits and 4 bits */
+		lsb   = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0;
+		msb   = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2;
+		p2[2] = msb << 2 | lsb;
+		p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
+		p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
+		p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT;
+		p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT;
+		/* This value is split over two registers, 2 bits and 4 bits */
+		lsb   = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0;
+		msb   = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2;
+		p2[7] = msb << 2 | lsb;
+		p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT;
+		p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT;
+		for (i = 0; i < tmdev->num_sensors; i++)
+			p2[i] = ((base1 + p2[i]) << 2);
+		/* Fall through */
+	case ONE_PT_CALIB2:
+		base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT;
+		p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+		p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+		p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+		p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
+		p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
+		p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT;
+		p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT;
+		p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT;
+		p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT;
+		p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT;
+		for (i = 0; i < tmdev->num_sensors; i++)
+			p1[i] = (((base0) + p1[i]) << 2);
+		break;
+	default:
+		for (i = 0; i < tmdev->num_sensors; i++) {
+			p1[i] = 500;
+			p2[i] = 780;
+		}
+		break;
+	}
+
+	compute_intercept_slope(tmdev, p1, p2, mode);
+
+	return 0;
+}
+
+#define STATUS_OFFSET		0x44
+#define LAST_TEMP_MASK		0x3ff
+#define STATUS_VALID_BIT	BIT(14)
+
+static int get_temp_tsens_v1(struct tsens_device *tmdev, int id, int *temp)
+{
+	struct tsens_sensor *s = &tmdev->sensor[id];
+	u32 code;
+	unsigned int status_reg;
+	u32 last_temp = 0, last_temp2 = 0, last_temp3 = 0;
+	int ret;
+
+	status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4;
+	ret = regmap_read(tmdev->tm_map, status_reg, &code);
+	if (ret)
+		return ret;
+	last_temp = code & LAST_TEMP_MASK;
+	if (code & STATUS_VALID_BIT)
+		goto done;
+
+	/* Try a second time */
+	ret = regmap_read(tmdev->tm_map, status_reg, &code);
+	if (ret)
+		return ret;
+	if (code & STATUS_VALID_BIT) {
+		last_temp = code & LAST_TEMP_MASK;
+		goto done;
+	} else {
+		last_temp2 = code & LAST_TEMP_MASK;
+	}
+
+	/* Try a third/last time */
+	ret = regmap_read(tmdev->tm_map, status_reg, &code);
+	if (ret)
+		return ret;
+	if (code & STATUS_VALID_BIT) {
+		last_temp = code & LAST_TEMP_MASK;
+		goto done;
+	} else {
+		last_temp3 = code & LAST_TEMP_MASK;
+	}
+
+	if (last_temp == last_temp2)
+		last_temp = last_temp2;
+	else if (last_temp2 == last_temp3)
+		last_temp = last_temp3;
+done:
+	/* Convert temperature from ADC code to milliCelsius */
+	*temp = code_to_degc(last_temp, s) * 1000;
+
+	return 0;
+}
+
+static const struct tsens_ops ops_generic_v1 = {
+	.init		= init_common,
+	.calibrate	= calibrate_v1,
+	.get_temp	= get_temp_tsens_v1,
+};
+
+const struct tsens_data data_tsens_v1 = {
+	.ops		= &ops_generic_v1,
+	.reg_offsets	= { [SROT_CTRL_OFFSET] = 0x4 },
+};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index f1ec9bbe4717..d0cc0c09894a 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -64,6 +64,9 @@ static const struct of_device_id tsens_table[] = {
 		.compatible = "qcom,msm8996-tsens",
 		.data = &data_8996,
 	}, {
+		.compatible = "qcom,tsens-v1",
+		.data = &data_tsens_v1,
+	}, {
 		.compatible = "qcom,tsens-v2",
 		.data = &data_tsens_v2,
 	},
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 7b7feee5dc46..f8dc96c42b94 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -90,9 +90,10 @@ char *qfprom_read(struct device *, const char *);
 void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
 int init_common(struct tsens_device *);
 int get_temp_common(struct tsens_device *, int, int *);
+int code_to_degc(u32 adc_code, const struct tsens_sensor *s);
 
 /* TSENS v1 targets */
-extern const struct tsens_data data_8916, data_8974, data_8960;
+extern const struct tsens_data data_8916, data_8974, data_8960, data_tsens_v1;
 /* TSENS v2 targets */
 extern const struct tsens_data data_8996, data_tsens_v2;
 
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index c86d6d8bdfed..02fc9f210aee 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -13,6 +13,7 @@
 
 #include <linux/clk.h>
 #include <linux/cpumask.h>
+#include <linux/cpu_cooling.h>
 #include <linux/completion.h>
 #include <linux/kobject.h>
 #include <linux/notifier.h>
@@ -151,6 +152,11 @@ struct cpufreq_policy {
 
 	/* For cpufreq driver's internal use */
 	void			*driver_data;
+
+#ifdef CONFIG_CPU_THERMAL
+	/* Pointer to the cooling device if used for thermal mitigation */
+	struct thermal_cooling_device *cdev;
+#endif
 };
 
 /* Only for ACPI */
@@ -346,14 +352,15 @@ struct cpufreq_driver {
 };
 
 /* flags */
-#define CPUFREQ_STICKY		(1 << 0)	/* driver isn't removed even if
-						   all ->init() calls failed */
-#define CPUFREQ_CONST_LOOPS	(1 << 1)	/* loops_per_jiffy or other
-						   kernel "constants" aren't
-						   affected by frequency
-						   transitions */
-#define CPUFREQ_PM_NO_WARN	(1 << 2)	/* don't warn on suspend/resume
-						   speed mismatches */
+
+/* driver isn't removed even if all ->init() calls failed */
+#define CPUFREQ_STICKY				BIT(0)
+
+/* loops_per_jiffy or other kernel "constants" aren't affected by frequency transitions */
+#define CPUFREQ_CONST_LOOPS			BIT(1)
+
+/* don't warn on suspend/resume speed mismatches */
+#define CPUFREQ_PM_NO_WARN			BIT(2)
 
 /*
  * This should be set by platforms having multiple clock-domains, i.e.
@@ -361,14 +368,14 @@ struct cpufreq_driver {
  * be created in cpu/cpu<num>/cpufreq/ directory and so they can use the same
  * governor with different tunables for different clusters.
  */
-#define CPUFREQ_HAVE_GOVERNOR_PER_POLICY (1 << 3)
+#define CPUFREQ_HAVE_GOVERNOR_PER_POLICY	BIT(3)
 
 /*
  * Driver will do POSTCHANGE notifications from outside of their ->target()
  * routine and so must set cpufreq_driver->flags with this flag, so that core
  * can handle them specially.
  */
-#define CPUFREQ_ASYNC_NOTIFICATION  (1 << 4)
+#define CPUFREQ_ASYNC_NOTIFICATION		BIT(4)
 
 /*
  * Set by drivers which want cpufreq core to check if CPU is running at a
@@ -377,13 +384,19 @@ struct cpufreq_driver {
  * from the table. And if that fails, we will stop further boot process by
  * issuing a BUG_ON().
  */
-#define CPUFREQ_NEED_INITIAL_FREQ_CHECK	(1 << 5)
+#define CPUFREQ_NEED_INITIAL_FREQ_CHECK	BIT(5)
 
 /*
  * Set by drivers to disallow use of governors with "dynamic_switching" flag
  * set.
  */
-#define CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING (1 << 6)
+#define CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING	BIT(6)
+
+/*
+ * Set by drivers that want the core to automatically register the cpufreq
+ * driver as a thermal cooling device.
+ */
+#define CPUFREQ_AUTO_REGISTER_COOLING_DEV	BIT(7)
 
 int cpufreq_register_driver(struct cpufreq_driver *driver_data);
 int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
@@ -414,6 +427,19 @@ cpufreq_verify_within_cpu_limits(struct cpufreq_policy *policy)
 			policy->cpuinfo.max_freq);
 }
 
+#ifdef CONFIG_CPU_THERMAL
+static inline void register_cooling_device(struct cpufreq_policy *policy) {
+	policy->cdev = of_cpufreq_cooling_register(policy);
+}
+
+static inline void unregister_cooling_device(struct cpufreq_policy *policy) {
+	cpufreq_cooling_unregister(policy->cdev);
+	policy->cdev = NULL;
+}
+#else
+static inline void register_cooling_device(struct cpufreq_policy *policy) {}
+static inline void unregister_cooling_device(struct cpufreq_policy *policy) {}
+#endif
 #ifdef CONFIG_CPU_FREQ
 void cpufreq_suspend(void);
 void cpufreq_resume(void);