Merge remote-tracking branch 'qcs404-misc/tracking-qcomlt-qcs404-misc' into integration-linux-qcomlt

# Conflicts:
#	Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
#	drivers/firmware/qcom_scm.c
#	drivers/remoteproc/qcom_adsp_pil.c

15 files changed, 189 insertions, 40 deletions

diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
index 34ab5763f494..736fba3bad54 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
@@ -8,6 +8,7 @@ PROPERTIES
 	Definition: must be one of:
 		    "qcom,pm8941-pwrkey"
 		    "qcom,pm8941-resin"
+		    "qcom,pms405-pwrkey"
 
 - reg:
 	Usage: required
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt
index 6e8a9ab0fdae..1232fc9fc709 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt
@@ -11,6 +11,7 @@ platforms.
 		    "qcom,msm8916-apcs-kpss-global",
 		    "qcom,msm8996-apcs-hmss-global"
 		    "qcom,msm8998-apcs-hmss-global"
+		    "qcom,qcs404-apcs-apps-global"
 		    "qcom,sdm845-apss-shared"
 
 - reg:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index ffd4345415f3..ab4000eab07d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -19,6 +19,7 @@ PMIC's from Qualcomm.
 		    "qcom,pm8998-gpio"
 		    "qcom,pma8084-gpio"
 		    "qcom,pmi8994-gpio"
+		    "qcom,pms405-gpio"
 
 		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
 		    if the device is on an spmi bus or an ssbi bus respectively
@@ -91,6 +92,7 @@ to specify in a pin configuration subnode:
 		    gpio1-gpio26 for pm8998
 		    gpio1-gpio22 for pma8084
 		    gpio1-gpio10 for pmi8994
+		    gpio1-gpio11 for pms405
 
 - function:
 	Usage: required
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
index 651491bb63b7..5705f575862d 100644
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
@@ -6,7 +6,10 @@ and resin along with the Android reboot-mode.
 This DT node has pwrkey and resin as sub nodes.
 
 Required Properties:
--compatible: "qcom,pm8916-pon"
+-compatible: Must be one of:
+	"qcom,pm8916-pon"
+	"qcom,pms405-pon"
+
 -reg: Specifies the physical address of the pon register
 
 Optional subnode:
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
index 58a1d97972f5..45025b5b67f6 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
@@ -26,6 +26,7 @@ Regulator nodes are identified by their compatible:
 		    "qcom,rpm-pm8998-regulators"
 		    "qcom,rpm-pma8084-regulators"
 		    "qcom,rpm-pmi8998-regulators"
+		    "qcom,rpm-pms405-regulators"
 
 - vdd_s1-supply:
 - vdd_s2-supply:
@@ -188,6 +189,24 @@ Regulator nodes are identified by their compatible:
 	Definition: reference to regulator supplying the input pin, as
 		    described in the data sheet
 
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_l1_l2-supply:
+- vdd_l3_l8-supply:
+- vdd_l4-supply:
+- vdd_l5_l6-supply:
+- vdd_l7-supply:
+- vdd_l3_l8-supply:
+- vdd_l9-supply:
+- vdd_l10_l11_l12_l13-supply:
+	Usage: optional (pms405 only)
+	Value type: <phandle>
+	Definition: reference to regulator supplying the input pin, as
+		    described in the data sheet
+
 The regulator node houses sub-nodes for each regulator within the device. Each
 sub-node is identified using the node's name, with valid values listed for each
 of the pmics below.
@@ -222,6 +241,10 @@ pma8084:
 pmi8998:
 	bob
 
+pms405:
+	s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12,
+	l13
+
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt.
 
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
index b7d058228185..9c0cff3a5ed8 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
@@ -10,6 +10,9 @@ on the Qualcomm ADSP Hexagon core.
 		    "qcom,msm8974-adsp-pil"
 		    "qcom,msm8996-adsp-pil"
 		    "qcom,msm8996-slpi-pil"
+		    "qcom,qcs404-adsp-pas"
+		    "qcom,qcs404-cdsp-pas"
+		    "qcom,qcs404-wcss-pas"
 		    "qcom,sdm845-adsp-pas"
 		    "qcom,sdm845-cdsp-pas"
 
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
index 89e1cb9212f6..ec95705ba692 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
@@ -23,6 +23,7 @@ resources.
 		    "qcom,rpm-msm8916"
 		    "qcom,rpm-msm8974"
 		    "qcom,rpm-msm8998"
+		    "qcom,rpm-qcs404"
 
 - qcom,smd-channels:
 	Usage: required
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 97ad56db5a5a..5ef146a056d2 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -525,34 +525,44 @@ static int qcom_scm_probe(struct platform_device *pdev)
 		return ret;
 
 	clks = (unsigned long)of_device_get_match_data(&pdev->dev);
-	if (clks & SCM_HAS_CORE_CLK) {
-		scm->core_clk = devm_clk_get(&pdev->dev, "core");
-		if (IS_ERR(scm->core_clk)) {
-			if (PTR_ERR(scm->core_clk) != -EPROBE_DEFER)
-				dev_err(&pdev->dev,
-					"failed to acquire core clk\n");
+
+	scm->core_clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(scm->core_clk)) {
+		if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
+			return PTR_ERR(scm->core_clk);
+
+		if (clks & SCM_HAS_CORE_CLK) {
+			dev_err(&pdev->dev, "failed to acquire core clk\n");
 			return PTR_ERR(scm->core_clk);
 		}
+
+		scm->core_clk = NULL;
 	}
 
-	if (clks & SCM_HAS_IFACE_CLK) {
-		scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
-		if (IS_ERR(scm->iface_clk)) {
-			if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER)
-				dev_err(&pdev->dev,
-					"failed to acquire iface clk\n");
+	scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
+	if (IS_ERR(scm->iface_clk)) {
+		if (PTR_ERR(scm->iface_clk) == -EPROBE_DEFER)
+			return PTR_ERR(scm->iface_clk);
+
+		if (clks & SCM_HAS_IFACE_CLK) {
+			dev_err(&pdev->dev, "failed to acquire iface clk\n");
 			return PTR_ERR(scm->iface_clk);
 		}
+
+		scm->iface_clk = NULL;
 	}
 
-	if (clks & SCM_HAS_BUS_CLK) {
-		scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
-		if (IS_ERR(scm->bus_clk)) {
-			if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER)
-				dev_err(&pdev->dev,
-					"failed to acquire bus clk\n");
+	scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
+	if (IS_ERR(scm->bus_clk)) {
+		if (PTR_ERR(scm->bus_clk) == -EPROBE_DEFER)
+			return PTR_ERR(scm->bus_clk);
+
+		if (clks & SCM_HAS_BUS_CLK) {
+			dev_err(&pdev->dev, "failed to acquire bus clk\n");
 			return PTR_ERR(scm->bus_clk);
 		}
+
+		scm->bus_clk = NULL;
 	}
 
 	scm->reset.ops = &qcom_scm_pas_reset_ops;
@@ -594,26 +604,26 @@ static const struct of_device_id qcom_scm_dt_match[] = {
 	{ .compatible = "qcom,scm-apq8064",
 	  /* FIXME: This should have .data = (void *) SCM_HAS_CORE_CLK */
 	},
-	{ .compatible = "qcom,scm-msm8660",
-	  .data = (void *) SCM_HAS_CORE_CLK,
-	},
-	{ .compatible = "qcom,scm-msm8960",
-	  .data = (void *) SCM_HAS_CORE_CLK,
-	},
-	{ .compatible = "qcom,scm-msm8996",
-	  .data = NULL, /* no clocks */
+	{ .compatible = "qcom,scm-apq8084", .data = (void *)(SCM_HAS_CORE_CLK |
+							     SCM_HAS_IFACE_CLK |
+							     SCM_HAS_BUS_CLK)
 	},
-	{ .compatible = "qcom,scm-ipq4019",
-	  .data = NULL, /* no clocks */
+	{ .compatible = "qcom,scm-ipq4019" },
+	{ .compatible = "qcom,scm-msm8660", .data = (void *) SCM_HAS_CORE_CLK },
+	{ .compatible = "qcom,scm-msm8960", .data = (void *) SCM_HAS_CORE_CLK },
+	{ .compatible = "qcom,scm-msm8916", .data = (void *)(SCM_HAS_CORE_CLK |
+							     SCM_HAS_IFACE_CLK |
+							     SCM_HAS_BUS_CLK)
 	},
 	{ .compatible = "qcom,scm-sdm845",
 	  .data = NULL /* no clocks */
 	},
-	{ .compatible = "qcom,scm",
-	  .data = (void *)(SCM_HAS_CORE_CLK
-			   | SCM_HAS_IFACE_CLK
-			   | SCM_HAS_BUS_CLK),
+	{ .compatible = "qcom,scm-msm8974", .data = (void *)(SCM_HAS_CORE_CLK |
+							     SCM_HAS_IFACE_CLK |
+							     SCM_HAS_BUS_CLK)
 	},
+	{ .compatible = "qcom,scm-msm8996" },
+	{ .compatible = "qcom,scm" },
 	{}
 };
 
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index 48153e0ca19a..fccf63263c1c 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -317,6 +317,7 @@ static const struct pm8941_data resin_data = {
 static const struct of_device_id pm8941_pwr_key_id_table[] = {
 	{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
 	{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
+	{ .compatible = "qcom,pms405-pwrkey", .data = &pwrkey_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
diff --git a/drivers/mailbox/qcom-apcs-ipc-mailbox.c b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
index 333ed4a9d4b8..aed23ac9550d 100644
--- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c
+++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
@@ -126,6 +126,7 @@ static const struct of_device_id qcom_apcs_ipc_of_match[] = {
 	{ .compatible = "qcom,msm8916-apcs-kpss-global", .data = (void *)8 },
 	{ .compatible = "qcom,msm8996-apcs-hmss-global", .data = (void *)16 },
 	{ .compatible = "qcom,msm8998-apcs-hmss-global", .data = (void *)8 },
+	{ .compatible = "qcom,qcs404-apcs-apps-global", .data = (void *)8 },
 	{ .compatible = "qcom,sdm845-apss-shared", .data = (void *)12 },
 	{}
 };
diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c
index 0c4caaa7e88f..3fa1642d4c54 100644
--- a/drivers/power/reset/qcom-pon.c
+++ b/drivers/power/reset/qcom-pon.c
@@ -74,6 +74,7 @@ static int pm8916_pon_probe(struct platform_device *pdev)
 
 static const struct of_device_id pm8916_pon_id_table[] = {
 	{ .compatible = "qcom,pm8916-pon" },
+	{ .compatible = "qcom,pms405-pon" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 758812de2a50..2c35f993dfd5 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -472,6 +472,60 @@ static const struct regulator_desc pmi8998_bob = {
 	.ops = &rpm_bob_ops,
 };
 
+static const struct regulator_desc pms405_hfsmps3 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 216,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pms405_nldo300 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 128,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pms405_nldo1200 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 128,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pms405_pldo50 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 129,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pms405_pldo150 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 129,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pms405_pldo600 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(1256000, 0, 98, 8000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 99,
+	.ops = &rpm_smps_ldo_ops,
+};
+
 struct rpm_regulator_data {
 	const char *name;
 	u32 type;
@@ -713,6 +767,28 @@ static const struct rpm_regulator_data rpm_pmi8998_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pms405_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pms405_hfsmps3, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pms405_hfsmps3, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pms405_hfsmps3, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pms405_hfsmps3, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pms405_hfsmps3, "vdd_s5" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pms405_nldo1200, "vdd_l1_l2" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pms405_nldo1200, "vdd_l1_l2" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pms405_nldo1200, "vdd_l3_l8" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pms405_nldo300, "vdd_l4" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pms405_pldo600, "vdd_l5_l6" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pms405_pldo600, "vdd_l5_l6" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pms405_pldo150, "vdd_l7" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pms405_nldo1200, "vdd_l3_l8" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pms405_nldo1200, "vdd_l9" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pms405_pldo50, "vdd_l10_l11_l12_l13" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pms405_pldo150, "vdd_l10_l11_l12_l13" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pms405_pldo150, "vdd_l10_l11_l12_l13" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pms405_pldo150, "vdd_l10_l11_l12_l13" },
+	{}
+};
+
 static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
 	{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
@@ -721,6 +797,7 @@ static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-pm8998-regulators", .data = &rpm_pm8998_regulators },
 	{ .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators },
 	{ .compatible = "qcom,rpm-pmi8998-regulators", .data = &rpm_pmi8998_regulators },
+	{ .compatible = "qcom,rpm-pms405-regulators", .data = &rpm_pms405_regulators },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpm_of_match);
diff --git a/drivers/remoteproc/qcom_adsp_pil.c b/drivers/remoteproc/qcom_adsp_pil.c
index d15684504082..e4c6602993c6 100644
--- a/drivers/remoteproc/qcom_adsp_pil.c
+++ b/drivers/remoteproc/qcom_adsp_pil.c
@@ -343,13 +343,13 @@ static const struct adsp_data adsp_resource_init = {
 };
 
 static const struct adsp_data cdsp_resource_init = {
-		.crash_reason_smem = 601,
-		.firmware_name = "cdsp.mdt",
-		.pas_id = 18,
-		.has_aggre2_clk = false,
-		.ssr_name = "cdsp",
-		.sysmon_name = "cdsp",
-		.ssctl_id = 0x17,
+	.crash_reason_smem = 601,
+	.firmware_name = "cdsp.mdt",
+	.pas_id = 18,
+	.has_aggre2_clk = false,
+	.ssr_name = "cdsp",
+	.sysmon_name = "cdsp",
+	.ssctl_id = 0x17,
 };
 
 static const struct adsp_data slpi_resource_init = {
@@ -362,12 +362,24 @@ static const struct adsp_data slpi_resource_init = {
 		.ssctl_id = 0x16,
 };
 
+static const struct adsp_data wcss_resource_init = {
+	.crash_reason_smem = 421,
+	.firmware_name = "wcnss.mdt",
+	.pas_id = 6,
+	.ssr_name = "mpss",
+	.sysmon_name = "wcnss",
+	.ssctl_id = 0x12,
+};
+
 static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,msm8974-adsp-pil", .data = &adsp_resource_init},
 	{ .compatible = "qcom,msm8996-adsp-pil", .data = &adsp_resource_init},
 	{ .compatible = "qcom,sdm845-adsp-pas", .data = &adsp_resource_init},
 	{ .compatible = "qcom,sdm845-cdsp-pas", .data = &cdsp_resource_init},
 	{ .compatible = "qcom,msm8996-slpi-pil", .data = &slpi_resource_init},
+	{ .compatible = "qcom,qcs404-adsp-pas", .data = &adsp_resource_init },
+	{ .compatible = "qcom,qcs404-cdsp-pas", .data = &cdsp_resource_init },
+	{ .compatible = "qcom,qcs404-wcss-pas", .data = &wcss_resource_init },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, adsp_of_match);
diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
index 61a760ee4aac..e9ab90c19304 100644
--- a/drivers/remoteproc/qcom_q6v5.c
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -198,6 +198,9 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
 	}
 
 	q6v5->fatal_irq = platform_get_irq_byname(pdev, "fatal");
+	if (q6v5->fatal_irq == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
 	ret = devm_request_threaded_irq(&pdev->dev, q6v5->fatal_irq,
 					NULL, q6v5_fatal_interrupt,
 					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
@@ -208,6 +211,9 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
 	}
 
 	q6v5->ready_irq = platform_get_irq_byname(pdev, "ready");
+	if (q6v5->ready_irq == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
 	ret = devm_request_threaded_irq(&pdev->dev, q6v5->ready_irq,
 					NULL, q6v5_ready_interrupt,
 					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
@@ -218,6 +224,9 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
 	}
 
 	q6v5->handover_irq = platform_get_irq_byname(pdev, "handover");
+	if (q6v5->handover_irq == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
 	ret = devm_request_threaded_irq(&pdev->dev, q6v5->handover_irq,
 					NULL, q6v5_handover_interrupt,
 					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
@@ -229,6 +238,9 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
 	disable_irq(q6v5->handover_irq);
 
 	q6v5->stop_irq = platform_get_irq_byname(pdev, "stop-ack");
+	if (q6v5->stop_irq == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
 	ret = devm_request_threaded_irq(&pdev->dev, q6v5->stop_irq,
 					NULL, q6v5_stop_interrupt,
 					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index 93517ed83355..b8e63724a49d 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -227,6 +227,7 @@ static const struct of_device_id qcom_smd_rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-msm8974" },
 	{ .compatible = "qcom,rpm-msm8996" },
 	{ .compatible = "qcom,rpm-msm8998" },
+	{ .compatible = "qcom,rpm-qcs404" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match);