index
:
working/broadcom/kernel.git
llct/capri-support
master
public-review/ARM-bcm_defconfig-Do-not-expect-appended-DTB
public-review/ARM-dts-Leave-sdio1-as-disabled-on-bcm28155-ap
public-review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
public-review/Add-Broadcom-Kona-I2C-Support-v2-on-v3.13-rc2
public-review/Add-Broadcom-Kona-PWM-Support-v1
public-review/Add-Broadcom-Kona-PWM-Support-v1-on-v3.12-rc2
public-review/Add-Broadcom-Kona-PWM-Support-v2
public-review/Add-Broadcom-Kona-PWM-Support-v5
public-review/Enable-I2C-on-bcm-28155-ap
public-review/Improve-support-for-deferred-regulators-v2
public-review/Set-n_voltages-for-linear-reg
public-review/Try-other-signal-levels-during-power-up-v2
public-review/Update-Kona-drivers-to-use-clocks-v4
public-review/Update-bcm_defconfig
public-review/Use-mmc-core-regulator-infrastucture
public-review/clocksource-kona-Print-warning-rather-than-panic
pull/spear-clocksource-init
review/ARM-DT-Add-missing-UARTs-for-bcm11351-bcm281xx
review/ARM-bcm281xx-Board-specific-reboot-code-v1
review/ARM-bcm281xx-Board-specific-reboot-code-v2
review/ARM-bcm281xx-Board-specific-reboot-code-v3
review/ARM-bcm281xx-GPIO-driver-v1
review/ARM-bcm281xx-TMON-driver-v1
review/ARM-bcm281xx-TMON-driver-v2
review/ARM-bcm281xx-adding-bcm28155-ap-dts-v1
review/ARM-bcm281xx-thermal-v1
review/ARM-bcm281xx-thermal-v2
review/ARM-bcm281xx-turn-on-l2-cache-v1
review/ARM-bcm281xx-turn-on-socket-network-support-v1
review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
review/Add-Broadcom-Kona-I2C-Support-v1
review/Update-Kona-drivers-to-use-clocks-v1
review/Update-Kona-drivers-to-use-clocks-v2
review/arm-configs-bcm-remove-debug-ll-v1
review/bcm-bus-clk-v5
review/bcm-bus-clk-v6
review/bcm-smp-v4
review/bcm-smp-v5
review/bcm-smp-v6
review/bcm281xx-udc-v1
review/bcm281xx-udc-v3
review/bcm281xx-udc-v4
review/bcm281xx-udc-v5
review/bcm281xx-udc-v9
review/bcm2835
review/bcm59056-pmu-v1
review/bcm59056-pmu-v2
review/bcm59056-pmu-v3
review/bcm59056-pmu-v4
review/bcm59056-pmu-v5
review/bcm59056-reboot-fix
review/bcm590xx-add-addtl-regulators-v1
review/bcm590xx-add-addtl-regulators-v2
review/capri-boot-3.15-v1
review/capri-smp
review/clang-asm
review/do_syslog_tweak
review/dw8250_clock
review/dw8250_clock-v2
review/dw8250_clock-v3
review/enable-method-bindings-v3
review/enable-method-bindings-v4
review/gpio-centralize-locking-v1
review/gpio-fix-parameter-v1
review/gpio-get-v1
review/gpio-get-v2
review/gpio-irq-handler-v1
review/gpio-setup-message
review/gpio-unsigned-fix-v1
review/hawaii-v1
review/hawaii-v2
review/minor-printk-fixes
review/minor-printk-fixes-v2
review/mmc-card-event
review/mmc-for-tkryger-v2
review/mmc-for-tkryger-v3
review/mmc-for-tkryger-v4
review/mmc-sdhci-bcm-kona-fix-nonremovable-test-v1
review/mmc-sdhci-bcm-kona-linker-section-warning-v1
review/mmc-sdhci-bcm-kona-make-warning-go-away-v1
review/more-printk-flags
review/more-printk-flags-v2
review/printk-flags-v6
review/printk-flags-v7
review/sdhci-cd
review/sdhci-cd-v2
review/sdhci-cd-v3
review/serial-8250_dw-Improve-unwritable-LCR-workaround-v2
review/watchdog-v1
rfc/watchdog-resolution
wip/bcm59056-pmu-v3
Broadcom Landing Team Kernel
about
summary
refs
log
tree
commit
diff
log msg
author
committer
range
Branch
Commit message
Author
Age
llct/capri-support
printk: rename DEFAULT_MESSAGE_LOGLEVEL
Alex Elder
10 years
master
kexec: fix build error when hugetlbfs is disabled
David Rientjes
10 years
public-review/ARM-bcm_defconfig-Do-not-expect-appended-DTB
ARM: bcm_defconfig: Do not expect appended DTB
Tim Kryger
10 years
public-review/ARM-dts-Leave-sdio1-as-disabled-on-bcm28155-ap
ARM: dts: Leave sdio1 as disabled on bcm28155-ap
Tim Kryger
10 years
public-review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
ARM: dts: bcm28155-ap: Fix Card Detection GPIO
Tim Kryger
10 years
public-review/Add-Broadcom-Kona-I2C-Support-v2-on-v3.13-rc2
ARM: dts: bcm28155-ap: Enable all the i2c busses
Tim Kryger
10 years
public-review/Add-Broadcom-Kona-PWM-Support-v1
ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
10 years
public-review/Add-Broadcom-Kona-PWM-Support-v1-on-v3.12-rc2
ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
10 years
public-review/Add-Broadcom-Kona-PWM-Support-v2
ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
10 years
public-review/Add-Broadcom-Kona-PWM-Support-v5
ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
10 years
public-review/Enable-I2C-on-bcm-28155-ap
ARM: dts: bcm28155-ap: Enable all the i2c busses
Tim Kryger
10 years
public-review/Improve-support-for-deferred-regulators-v2
mmc: core: Improve support for deferred regulators
Tim Kryger
10 years
public-review/Set-n_voltages-for-linear-reg
regulator: bcm590xx: Set n_voltages for linear reg
Tim Kryger
10 years
public-review/Try-other-signal-levels-during-power-up-v2
mmc: core: Try other signal levels during power up
Tim Kryger
10 years
public-review/Update-Kona-drivers-to-use-clocks-v4
ARM: dts: Specify clocks for timer on bcm11351
Tim Kryger
10 years
public-review/Update-bcm_defconfig
ARM: bcm_defconfig: Unset CONFIG_CRYPTO_ANSI_CPRNG
Tim Kryger
10 years
public-review/Use-mmc-core-regulator-infrastucture
mmc: sdhci: Use mmc core regulator infrastucture
Tim Kryger
10 years
public-review/clocksource-kona-Print-warning-rather-than-panic
clocksource: kona: Print warning rather than panic
Tim Kryger
10 years
pull/spear-clocksource-init
ARM: spear: add __init to spear_clocksource_init()
Alex Elder
10 years
review/ARM-DT-Add-missing-UARTs-for-bcm11351-bcm281xx
ARM: DT: Add missing UARTs for bcm11351 (bcm281xx)
Tim Kryger
11 years
review/ARM-bcm281xx-Board-specific-reboot-code-v1
ARM: bcm281xx: DT changes for reboot code
Markus Mayer
11 years
review/ARM-bcm281xx-Board-specific-reboot-code-v2
ARM: bcm281xx: DT changes for reboot code
Markus Mayer
11 years
review/ARM-bcm281xx-Board-specific-reboot-code-v3
ARM: bcm281xx: DT changes for reboot code
Markus Mayer
11 years
review/ARM-bcm281xx-GPIO-driver-v1
ARM: bcm281xx: Enable GPIO driver
Markus Mayer
11 years
review/ARM-bcm281xx-TMON-driver-v1
ARM: dts: Add TMON driver support to bcm281xx
Wendy Ng
10 years
review/ARM-bcm281xx-TMON-driver-v2
ARM: dts: Add TMON driver support to bcm281xx
Wendy Ng
10 years
review/ARM-bcm281xx-adding-bcm28155-ap-dts-v1
ARM: bcm281xx: Adding bcm28155-ap.dts
Markus Mayer
11 years
review/ARM-bcm281xx-thermal-v1
ARM: bcm281xx: Add thermal driver to device tree.
Wendy Ng
11 years
review/ARM-bcm281xx-thermal-v2
ARM: bcm281xx: Add thermal driver to device tree.
Wendy Ng
11 years
review/ARM-bcm281xx-turn-on-l2-cache-v1
ARM: bcm281xx: Turn on L2 cache.
Markus Mayer
11 years
review/ARM-bcm281xx-turn-on-socket-network-support-v1
ARM bcm281xx: Turn on socket & network support.
Markus Mayer
11 years
review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
ARM: dts: bcm28155-ap: Fix Card Detection GPIO
Tim Kryger
10 years
review/Add-Broadcom-Kona-I2C-Support-v1
ARM: dts: bcm28155-ap: Enable all the i2c busses
Tim Kryger
10 years
review/Update-Kona-drivers-to-use-clocks-v1
mmc: sdhci-bcm-kona: Add basic use of clocks
Tim Kryger
10 years
review/Update-Kona-drivers-to-use-clocks-v2
mmc: sdhci-bcm-kona: Add basic use of clocks
Tim Kryger
10 years
review/arm-configs-bcm-remove-debug-ll-v1
ARM: configs: disable DEBUG_LL in bcm_defconfig
Matt Porter
11 years
review/bcm-bus-clk-v5
ARM: dts: add bus clock bsc3_apb for bcm281xx
Alex Elder
10 years
review/bcm-bus-clk-v6
ARM: dts: add bus clock bsc3_apb for bcm281xx
Alex Elder
10 years
review/bcm-smp-v4
ARM: dts: enable SMP support for bcm21664
Alex Elder
10 years
review/bcm-smp-v5
ARM: dts: enable SMP support for bcm21664
Alex Elder
10 years
review/bcm-smp-v6
ARM: dts: enable SMP support for bcm21664
Alex Elder
10 years
review/bcm281xx-udc-v1
ARM: dts: add usb udc support to bcm281xx
Matt Porter
10 years
review/bcm281xx-udc-v3
ARM: dts: add usb udc support to bcm281xx
Matt Porter
10 years
review/bcm281xx-udc-v4
ARM: dts: add usb udc support to bcm281xx
Matt Porter
10 years
review/bcm281xx-udc-v5
ARM: dts: add usb udc support to bcm281xx
Matt Porter
10 years
review/bcm281xx-udc-v9
ARM: dts: add usb udc support to bcm281xx
Matt Porter
10 years
review/bcm2835
ARM: bcm2835: Move to mach-bcm directory
Markus Mayer
10 years
review/bcm59056-pmu-v1
ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap
Matt Porter
10 years
review/bcm59056-pmu-v2
ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
Matt Porter
10 years
review/bcm59056-pmu-v3
ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
Matt Porter
10 years
review/bcm59056-pmu-v4
ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
Matt Porter
10 years
review/bcm59056-pmu-v5
ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
Matt Porter
10 years
review/bcm59056-reboot-fix
ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
Matt Porter
10 years
review/bcm590xx-add-addtl-regulators-v1
ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators
Matt Porter
10 years
review/bcm590xx-add-addtl-regulators-v2
ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators
Matt Porter
10 years
review/capri-boot-3.15-v1
ARM: bcm281xx: Rename board_init() function
Markus Mayer
10 years
review/capri-smp
ARM: dts: enable SMP support for BCM11351 dts
Ray Jui
10 years
review/clang-asm
mach-bcm SMC: address clang inline asm incompatibility
Alex Elder
10 years
review/do_syslog_tweak
printk: tweak do_syslog() to match comments
Alex Elder
10 years
review/dw8250_clock
serial: 8250_dw: support high baudrates if possible
Alex Elder
10 years
review/dw8250_clock-v2
serial: 8250_dw: support high baudrates if possible
Alex Elder
10 years
review/dw8250_clock-v3
serial: 8250_dw: support high baudrates if possible
Alex Elder
10 years
review/enable-method-bindings-v3
devicetree: bindings: separate CPU enable method descriptions
Alex Elder
10 years
review/enable-method-bindings-v4
devicetree: bindings: separate CPU enable method descriptions
Alex Elder
10 years
review/gpio-centralize-locking-v1
gpio: bcm281xx: Centralize register locking
Markus Mayer
10 years
review/gpio-fix-parameter-v1
gpio: bcm281xx: Fix parameter name for GPIO_CONTROL macro
Markus Mayer
10 years
review/gpio-get-v1
gpio: bcm281xx: Fix return value of bcm_kona_gpio_get()
Markus Mayer
10 years
review/gpio-get-v2
gpio: bcm281xx: Fix return value of bcm_kona_gpio_get()
Markus Mayer
10 years
review/gpio-irq-handler-v1
gpio: bcm281xx: Fix nested interrupt handler issue
Markus Mayer
10 years
review/gpio-setup-message
gpio: bcm281xx: Don't print addresses of GPIO area in probe()
Markus Mayer
10 years
review/gpio-unsigned-fix-v1
gpio: bcm281xx: Use "unsigned gpio" consistently throughout the code
Markus Mayer
10 years
review/hawaii-v1
ARM: dts: bcm21664: Add device tree files.
Markus Mayer
10 years
review/hawaii-v2
ARM: dts: bcm21664: Add device tree files.
Markus Mayer
10 years
review/minor-printk-fixes
printk: miscellaneous cleanups
Alex Elder
10 years
review/minor-printk-fixes-v2
printk: miscellaneous cleanups
Alex Elder
10 years
review/mmc-card-event
mmc: Delay the card_event callback into the mmc_rescan worker
Markus Mayer
10 years
review/mmc-for-tkryger-v2
mmc: sdhci: Replace host->mmc with mmc where possible
Markus Mayer
10 years
review/mmc-for-tkryger-v3
mmc: sdhci: Replace host->mmc with mmc where possible
Markus Mayer
10 years
review/mmc-for-tkryger-v4
mmc: sdhci: Replace host->mmc with mmc where possible
Markus Mayer
10 years
review/mmc-sdhci-bcm-kona-fix-nonremovable-test-v1
ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona
Christian Daudt
11 years
review/mmc-sdhci-bcm-kona-linker-section-warning-v1
mmc: sdhci-bcm-kona: make linker-section warning go away
Markus Mayer
11 years
review/mmc-sdhci-bcm-kona-make-warning-go-away-v1
mmc: sdhci-bcm-kona: make linker-section warning go away
Markus Mayer
11 years
review/more-printk-flags
printk: rename LOG_NEWLINE and tidy up
Alex Elder
10 years
review/more-printk-flags-v2
printk: improve some commentary; tidy up
Alex Elder
10 years
review/printk-flags-v6
printk: correct some more typos
Alex Elder
10 years
review/printk-flags-v7
printk: correct some more typos
Alex Elder
10 years
review/sdhci-cd
ARM: dts: bcm281xx: Add change disk GPIO
Markus Mayer
11 years
review/sdhci-cd-v2
ARM: dts: bcm281xx: Add card detect GPIO
Markus Mayer
11 years
review/sdhci-cd-v3
ARM: dts: bcm281xx: Add card detect GPIO
Markus Mayer
10 years
review/serial-8250_dw-Improve-unwritable-LCR-workaround-v2
serial: 8250_dw: Improve unwritable LCR workaround
Tim Kryger
10 years
review/watchdog-v1
ARM: bcm281xx: watchdog configuration
Markus Mayer
10 years
rfc/watchdog-resolution
watchdog: bcm281xx: Support for timer resolution ioctls
Markus Mayer
10 years
wip/bcm59056-pmu-v3
allow mfd to be built as a module
Matt Porter
10 years