diff options
-rw-r--r-- | arch/arm64/boot/dts/Makefile | 3 | ||||
-rw-r--r-- | arch/arm64/boot/dts/juno_mali_fpga_TMIM_VP550_DP650_SMMU550.dts | 71 |
2 files changed, 73 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 06db106890d..73e88047d71 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,7 +1,8 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb \ fvp-base-gicv2-psci.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb \ - juno_mali_fpga_T860_VP550_DP550_SMMU550.dtb + juno_mali_fpga_T860_VP550_DP550_SMMU550.dtb \ + juno_mali_fpga_TMIM_VP550_DP650_SMMU550.dtb dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb targets += dtbs diff --git a/arch/arm64/boot/dts/juno_mali_fpga_TMIM_VP550_DP650_SMMU550.dts b/arch/arm64/boot/dts/juno_mali_fpga_TMIM_VP550_DP650_SMMU550.dts new file mode 100644 index 00000000000..d640ab42e17 --- /dev/null +++ b/arch/arm64/boot/dts/juno_mali_fpga_TMIM_VP550_DP650_SMMU550.dts @@ -0,0 +1,71 @@ +/* + * ARM Ltd. Juno Plaform + * + * Fast Models FVP v2 support + */ + +#include "juno-common.dtsi" + +/ { + aliases { + malidp0 = &dp0; + }; + + gpu: gpu@0x6e000000 { + compatible = "arm,mali-midgard", "arm,mali"; + reg = <0x0 0x6e000000 0x0 0x4000>; + interrupts = <0 168 4>, <0 168 4>, <0 168 4>; + interrupt-names = "JOB", "MMU", "GPU"; + snoop_enable_smc = <0x8200ff04>; + snoop_disable_smc = <0x8200ff05>; + }; + + dp0: display@6f200000 { + compatible = "arm,mali-dp650"; + reg = <0 0x6f200000 0 0x40000>; + interrupts = <0 168 4>, <0 168 4>; + interrupt-names = "DE", "SE"; + clocks = <&db2oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; + clock-names = "pxclk", "mclk", "aclk", "pclk"; + de-axi-burst-length = <32>; + de-axi-outstanding-transactions = <15>; + se-axi-burst-length = <32>; + se-axi-outstanding-transactions = <15>; + se-axi-awqos = <0>; + se-axi-awcache = <0>; + #stream-id-cells = <5>; + port { + dp0_out: endpoint { + remote-endpoint = <&tx0_in>; + }; + }; + }; + + test-transmitters { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + tx0: video_tx@0 { + compatible = "generic,slave_enc_video_tx"; + reg = <0>; + i2c-slave = <&dvi2>; + type = "HDMI"; + type-idx = <0>; + port { + tx0_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; + }; + + smmu0: smmu@6f300000 { + compatible = "arm,mmu-500"; + reg = <0 0x6f300000 0 0x10000>; + #global-interrupts = <1>; + interrupts = <0 168 4>, <0 168 4>, <0 168 4>; + mmu-masters = <&dp0 0x000 0x400 0x800 0xc00 0x1000>; + status = "okay"; + }; +}; |