From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/i386/kernel/cpu/cpufreq/speedstep-ich.c | 424 +++++++++++++++++++++++++++ 1 file changed, 424 insertions(+) create mode 100644 arch/i386/kernel/cpu/cpufreq/speedstep-ich.c (limited to 'arch/i386/kernel/cpu/cpufreq/speedstep-ich.c') diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c new file mode 100644 index 00000000000..5b7d18a06af --- /dev/null +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c @@ -0,0 +1,424 @@ +/* + * (C) 2001 Dave Jones, Arjan van de ven. + * (C) 2002 - 2003 Dominik Brodowski + * + * Licensed under the terms of the GNU GPL License version 2. + * Based upon reverse engineered information, and on Intel documentation + * for chipsets ICH2-M and ICH3-M. + * + * Many thanks to Ducrot Bruno for finding and fixing the last + * "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler + * for extensive testing. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + + +/********************************************************************* + * SPEEDSTEP - DEFINITIONS * + *********************************************************************/ + +#include +#include +#include +#include +#include +#include + +#include "speedstep-lib.h" + + +/* speedstep_chipset: + * It is necessary to know which chipset is used. As accesses to + * this device occur at various places in this module, we need a + * static struct pci_dev * pointing to that device. + */ +static struct pci_dev *speedstep_chipset_dev; + + +/* speedstep_processor + */ +static unsigned int speedstep_processor = 0; + + +/* + * There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +static struct cpufreq_frequency_table speedstep_freqs[] = { + {SPEEDSTEP_HIGH, 0}, + {SPEEDSTEP_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg) + + +/** + * speedstep_set_state - set the SpeedStep state + * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) + * + * Tries to change the SpeedStep state. + */ +static void speedstep_set_state (unsigned int state) +{ + u32 pmbase; + u8 pm2_blk; + u8 value; + unsigned long flags; + + if (!speedstep_chipset_dev || (state > 0x1)) + return; + + /* get PMBASE */ + pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); + if (!(pmbase & 0x01)) { + printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); + return; + } + + pmbase &= 0xFFFFFFFE; + if (!pmbase) { + printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); + return; + } + + /* Disable IRQs */ + local_irq_save(flags); + + /* read state */ + value = inb(pmbase + 0x50); + + dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); + + /* write new state */ + value &= 0xFE; + value |= state; + + dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase); + + /* Disable bus master arbitration */ + pm2_blk = inb(pmbase + 0x20); + pm2_blk |= 0x01; + outb(pm2_blk, (pmbase + 0x20)); + + /* Actual transition */ + outb(value, (pmbase + 0x50)); + + /* Restore bus master arbitration */ + pm2_blk &= 0xfe; + outb(pm2_blk, (pmbase + 0x20)); + + /* check if transition was successful */ + value = inb(pmbase + 0x50); + + /* Enable IRQs */ + local_irq_restore(flags); + + dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); + + if (state == (value & 0x1)) { + dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000)); + } else { + printk (KERN_ERR "cpufreq: change failed - I/O error\n"); + } + + return; +} + + +/** + * speedstep_activate - activate SpeedStep control in the chipset + * + * Tries to activate the SpeedStep status and control registers. + * Returns -EINVAL on an unsupported chipset, and zero on success. + */ +static int speedstep_activate (void) +{ + u16 value = 0; + + if (!speedstep_chipset_dev) + return -EINVAL; + + pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value); + if (!(value & 0x08)) { + value |= 0x08; + dprintk("activating SpeedStep (TM) registers\n"); + pci_write_config_word(speedstep_chipset_dev, 0x00A0, value); + } + + return 0; +} + + +/** + * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic + * + * Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to + * the LPC bridge / PM module which contains all power-management + * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected + * chipset, or zero on failure. + */ +static unsigned int speedstep_detect_chipset (void) +{ + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801DB_12, + PCI_ANY_ID, + PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) + return 4; /* 4-M */ + + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801CA_12, + PCI_ANY_ID, + PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) + return 3; /* 3-M */ + + + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801BA_10, + PCI_ANY_ID, + PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) { + /* speedstep.c causes lockups on Dell Inspirons 8000 and + * 8100 which use a pretty old revision of the 82815 + * host brige. Abort on these systems. + */ + static struct pci_dev *hostbridge; + u8 rev = 0; + + hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82815_MC, + PCI_ANY_ID, + PCI_ANY_ID, + NULL); + + if (!hostbridge) + return 2; /* 2-M */ + + pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev); + if (rev < 5) { + dprintk("hostbridge does not support speedstep\n"); + speedstep_chipset_dev = NULL; + pci_dev_put(hostbridge); + return 0; + } + + pci_dev_put(hostbridge); + return 2; /* 2-M */ + } + + return 0; +} + +static unsigned int _speedstep_get(cpumask_t cpus) +{ + unsigned int speed; + cpumask_t cpus_allowed; + + cpus_allowed = current->cpus_allowed; + set_cpus_allowed(current, cpus); + speed = speedstep_get_processor_frequency(speedstep_processor); + set_cpus_allowed(current, cpus_allowed); + dprintk("detected %u kHz as current frequency\n", speed); + return speed; +} + +static unsigned int speedstep_get(unsigned int cpu) +{ + return _speedstep_get(cpumask_of_cpu(cpu)); +} + +/** + * speedstep_target - set a new CPUFreq policy + * @policy: new policy + * @target_freq: the target frequency + * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * + * Sets a new CPUFreq policy. + */ +static int speedstep_target (struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + struct cpufreq_freqs freqs; + cpumask_t cpus_allowed; + int i; + + if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) + return -EINVAL; + + freqs.old = _speedstep_get(policy->cpus); + freqs.new = speedstep_freqs[newstate].frequency; + freqs.cpu = policy->cpu; + + dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new); + + /* no transition necessary */ + if (freqs.old == freqs.new) + return 0; + + cpus_allowed = current->cpus_allowed; + + for_each_cpu_mask(i, policy->cpus) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } + + /* switch to physical CPU where state is to be changed */ + set_cpus_allowed(current, policy->cpus); + + speedstep_set_state(newstate); + + /* allow to be run on all CPUs */ + set_cpus_allowed(current, cpus_allowed); + + for_each_cpu_mask(i, policy->cpus) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + + return 0; +} + + +/** + * speedstep_verify - verifies a new CPUFreq policy + * @policy: new policy + * + * Limit must be within speedstep_low_freq and speedstep_high_freq, with + * at least one border included. + */ +static int speedstep_verify (struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); +} + + +static int speedstep_cpu_init(struct cpufreq_policy *policy) +{ + int result = 0; + unsigned int speed; + cpumask_t cpus_allowed; + + /* only run on CPU to be set, or on its sibling */ +#ifdef CONFIG_SMP + policy->cpus = cpu_sibling_map[policy->cpu]; +#endif + + cpus_allowed = current->cpus_allowed; + set_cpus_allowed(current, policy->cpus); + + /* detect low and high frequency */ + result = speedstep_get_freqs(speedstep_processor, + &speedstep_freqs[SPEEDSTEP_LOW].frequency, + &speedstep_freqs[SPEEDSTEP_HIGH].frequency, + &speedstep_set_state); + set_cpus_allowed(current, cpus_allowed); + if (result) + return result; + + /* get current speed setting */ + speed = _speedstep_get(policy->cpus); + if (!speed) + return -EIO; + + dprintk("currently at %s speed setting - %i MHz\n", + (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", + (speed / 1000)); + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = speed; + + result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); + + return 0; +} + + +static int speedstep_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct freq_attr* speedstep_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + + +static struct cpufreq_driver speedstep_driver = { + .name = "speedstep-ich", + .verify = speedstep_verify, + .target = speedstep_target, + .init = speedstep_cpu_init, + .exit = speedstep_cpu_exit, + .get = speedstep_get, + .owner = THIS_MODULE, + .attr = speedstep_attr, +}; + + +/** + * speedstep_init - initializes the SpeedStep CPUFreq driver + * + * Initializes the SpeedStep support. Returns -ENODEV on unsupported + * devices, -EINVAL on problems during initiatization, and zero on + * success. + */ +static int __init speedstep_init(void) +{ + /* detect processor */ + speedstep_processor = speedstep_detect_processor(); + if (!speedstep_processor) { + dprintk("Intel(R) SpeedStep(TM) capable processor not found\n"); + return -ENODEV; + } + + /* detect chipset */ + if (!speedstep_detect_chipset()) { + dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n"); + return -ENODEV; + } + + /* activate speedstep support */ + if (speedstep_activate()) { + pci_dev_put(speedstep_chipset_dev); + return -EINVAL; + } + + return cpufreq_register_driver(&speedstep_driver); +} + + +/** + * speedstep_exit - unregisters SpeedStep support + * + * Unregisters SpeedStep support. + */ +static void __exit speedstep_exit(void) +{ + pci_dev_put(speedstep_chipset_dev); + cpufreq_unregister_driver(&speedstep_driver); +} + + +MODULE_AUTHOR ("Dave Jones , Dominik Brodowski "); +MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges."); +MODULE_LICENSE ("GPL"); + +module_init(speedstep_init); +module_exit(speedstep_exit); -- cgit v1.2.3