From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/arm/mach-iop3xx/iop331-pci.c | 222 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 222 insertions(+) create mode 100644 arch/arm/mach-iop3xx/iop331-pci.c (limited to 'arch/arm/mach-iop3xx/iop331-pci.c') diff --git a/arch/arm/mach-iop3xx/iop331-pci.c b/arch/arm/mach-iop3xx/iop331-pci.c new file mode 100644 index 00000000000..44dd213b48a --- /dev/null +++ b/arch/arm/mach-iop3xx/iop331-pci.c @@ -0,0 +1,222 @@ +/* + * arch/arm/mach-iop3xx/iop331-pci.c + * + * PCI support for the Intel IOP331 chipset + * + * Author: Dave Jiang (dave.jiang@intel.com) + * Copyright (C) 2003, 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +#undef DEBUG +#undef DEBUG1 + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) do { } while (0) +#endif + +#ifdef DEBUG1 +#define DBG1(x...) printk(x) +#else +#define DBG1(x...) do { } while (0) +#endif + +/* + * This routine builds either a type0 or type1 configuration command. If the + * bus is on the 80331 then a type0 made, else a type1 is created. + */ +static u32 iop331_cfg_address(struct pci_bus *bus, int devfn, int where) +{ + struct pci_sys_data *sys = bus->sysdata; + u32 addr; + + if (sys->busnr == bus->number) + addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); + else + addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; + + addr |= PCI_FUNC(devfn) << 8 | (where & ~3); + + return addr; +} + +/* + * This routine checks the status of the last configuration cycle. If an error + * was detected it returns a 1, else it returns a 0. The errors being checked + * are parity, master abort, target abort (master and target). These types of + * errors occure during a config cycle where there is no device, like during + * the discovery stage. + */ +static int iop331_pci_status(void) +{ + unsigned int status; + int ret = 0; + + /* + * Check the status registers. + */ + status = *IOP331_ATUSR; + if (status & 0xf900) + { + DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); + *IOP331_ATUSR = status & 0xf900; + ret = 1; + } + status = *IOP331_ATUISR; + if (status & 0x679f) + { + DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); + *IOP331_ATUISR = status & 0x679f; + ret = 1; + } + return ret; +} + +/* + * Simply write the address register and read the configuration + * data. Note that the 4 nop's ensure that we are able to handle + * a delayed abort (in theory.) + */ +static inline u32 iop331_read(unsigned long addr) +{ + u32 val; + + __asm__ __volatile__( + "str %1, [%2]\n\t" + "ldr %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : "=r" (val) + : "r" (addr), "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); + + return val; +} + +/* + * The read routines must check the error status of the last configuration + * cycle. If there was an error, the routine returns all hex f's. + */ +static int +iop331_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + unsigned long addr = iop331_cfg_address(bus, devfn, where); + u32 val = iop331_read(addr) >> ((where & 3) * 8); + + if( iop331_pci_status() ) + val = 0xffffffff; + + *value = val; + + return PCIBIOS_SUCCESSFUL; +} + +static int +iop331_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + unsigned long addr = iop331_cfg_address(bus, devfn, where); + u32 val; + + if (size != 4) { + val = iop331_read(addr); + if (!iop331_pci_status() == 0) + return PCIBIOS_SUCCESSFUL; + + where = (where & 3) * 8; + + if (size == 1) + val &= ~(0xff << where); + else + val &= ~(0xffff << where); + + *IOP331_OCCDR = val | value << where; + } else { + asm volatile( + "str %1, [%2]\n\t" + "str %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : + : "r" (value), "r" (addr), + "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops iop331_ops = { + .read = iop331_read_config, + .write = iop331_write_config, +}; + +/* + * When a PCI device does not exist during config cycles, the XScale gets a + * bus error instead of returning 0xffffffff. This handler simply returns. + */ +int +iop331_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", + addr, fsr, regs->ARM_pc, regs->ARM_lr); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +/* + * Scan an IOP331 PCI bus. sys->bus defines which bus we scan. + */ +struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &iop331_ops, sys); +} + +void iop331_init(void) +{ + DBG1("PCI: Intel 80331 PCI init code.\n"); + DBG1("\tATU: IOP331_ATUCMD=0x%04x\n", *IOP331_ATUCMD); + DBG1("\tATU: IOP331_OMWTVR0=0x%04x, IOP331_OIOWTVR=0x%04x\n", + *IOP331_OMWTVR0, + *IOP331_OIOWTVR); + DBG1("\tATU: IOP331_OMWTVR1=0x%04x\n", *IOP331_OMWTVR1); + DBG1("\tATU: IOP331_ATUCR=0x%08x\n", *IOP331_ATUCR); + DBG1("\tATU: IOP331_IABAR0=0x%08x IOP331_IALR0=0x%08x IOP331_IATVR0=%08x\n", *IOP331_IABAR0, *IOP331_IALR0, *IOP331_IATVR0); + DBG1("\tATU: IOP31_IABAR1=0x%08x IOP331_IALR1=0x%08x\n", *IOP331_IABAR1, *IOP331_IALR1); + DBG1("\tATU: IOP331_ERBAR=0x%08x IOP331_ERLR=0x%08x IOP331_ERTVR=%08x\n", *IOP331_ERBAR, *IOP331_ERLR, *IOP331_ERTVR); + DBG1("\tATU: IOP331_IABAR2=0x%08x IOP331_IALR2=0x%08x IOP331_IATVR2=%08x\n", *IOP331_IABAR2, *IOP331_IALR2, *IOP331_IATVR2); + DBG1("\tATU: IOP331_IABAR3=0x%08x IOP331_IALR3=0x%08x IOP331_IATVR3=%08x\n", *IOP331_IABAR3, *IOP331_IALR3, *IOP331_IATVR3); + + hook_fault_code(16+6, iop331_pci_abort, SIGBUS, "imprecise external abort"); +} + -- cgit v1.2.3