From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/cli-sti-removal.txt | 133 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 Documentation/cli-sti-removal.txt (limited to 'Documentation/cli-sti-removal.txt') diff --git a/Documentation/cli-sti-removal.txt b/Documentation/cli-sti-removal.txt new file mode 100644 index 00000000000..0223c9d2033 --- /dev/null +++ b/Documentation/cli-sti-removal.txt @@ -0,0 +1,133 @@ + +#### cli()/sti() removal guide, started by Ingo Molnar + + +as of 2.5.28, five popular macros have been removed on SMP, and +are being phased out on UP: + + cli(), sti(), save_flags(flags), save_flags_cli(flags), restore_flags(flags) + +until now it was possible to protect driver code against interrupt +handlers via a cli(), but from now on other, more lightweight methods +have to be used for synchronization, such as spinlocks or semaphores. + +for example, driver code that used to do something like: + + struct driver_data; + + irq_handler (...) + { + .... + driver_data.finish = 1; + driver_data.new_work = 0; + .... + } + + ... + + ioctl_func (...) + { + ... + cli(); + ... + driver_data.finish = 0; + driver_data.new_work = 2; + ... + sti(); + ... + } + +was SMP-correct because the cli() function ensured that no +interrupt handler (amongst them the above irq_handler()) function +would execute while the cli()-ed section is executing. + +but from now on a more direct method of locking has to be used: + + spinlock_t driver_lock = SPIN_LOCK_UNLOCKED; + struct driver_data; + + irq_handler (...) + { + unsigned long flags; + .... + spin_lock_irqsave(&driver_lock, flags); + .... + driver_data.finish = 1; + driver_data.new_work = 0; + .... + spin_unlock_irqrestore(&driver_lock, flags); + .... + } + + ... + + ioctl_func (...) + { + ... + spin_lock_irq(&driver_lock); + ... + driver_data.finish = 0; + driver_data.new_work = 2; + ... + spin_unlock_irq(&driver_lock); + ... + } + +the above code has a number of advantages: + +- the locking relation is easier to understand - actual lock usage + pinpoints the critical sections. cli() usage is too opaque. + Easier to understand means it's easier to debug. + +- it's faster, because spinlocks are faster to acquire than the + potentially heavily-used IRQ lock. Furthermore, your driver does + not have to wait eg. for a big heavy SCSI interrupt to finish, + because the driver_lock spinlock is only used by your driver. + cli() on the other hand was used by many drivers, and extended + the critical section to the whole IRQ handler function - creating + serious lock contention. + + +to make the transition easier, we've still kept the cli(), sti(), +save_flags(), save_flags_cli() and restore_flags() macros defined +on UP systems - but their usage will be phased out until 2.6 is +released. + +drivers that want to disable local interrupts (interrupts on the +current CPU), can use the following five macros: + + local_irq_disable(), local_irq_enable(), local_save_flags(flags), + local_irq_save(flags), local_irq_restore(flags) + +but beware, their meaning and semantics are much simpler, far from +that of the old cli(), sti(), save_flags(flags) and restore_flags(flags) +SMP meaning: + + local_irq_disable() => turn local IRQs off + + local_irq_enable() => turn local IRQs on + + local_save_flags(flags) => save the current IRQ state into flags. The + state can be on or off. (on some + architectures there's even more bits in it.) + + local_irq_save(flags) => save the current IRQ state into flags and + disable interrupts. + + local_irq_restore(flags) => restore the IRQ state from flags. + +(local_irq_save can save both irqs on and irqs off state, and +local_irq_restore can restore into both irqs on and irqs off state.) + +another related change is that synchronize_irq() now takes a parameter: +synchronize_irq(irq). This change too has the purpose of making SMP +synchronization more lightweight - this way you can wait for your own +interrupt handler to finish, no need to wait for other IRQ sources. + + +why were these changes done? The main reason was the architectural burden +of maintaining the cli()/sti() interface - it became a real problem. The +new interrupt system is much more streamlined, easier to understand, debug, +and it's also a bit faster - the same happened to it that will happen to +cli()/sti() using drivers once they convert to spinlocks :-) + -- cgit v1.2.3