From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/arm/SA1100/ADSBitsy | 43 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/arm/SA1100/ADSBitsy (limited to 'Documentation/arm/SA1100/ADSBitsy') diff --git a/Documentation/arm/SA1100/ADSBitsy b/Documentation/arm/SA1100/ADSBitsy new file mode 100644 index 00000000000..ab47c383390 --- /dev/null +++ b/Documentation/arm/SA1100/ADSBitsy @@ -0,0 +1,43 @@ +ADS Bitsy Single Board Computer +(It is different from Bitsy(iPAQ) of Compaq) + +For more details, contact Applied Data Systems or see +http://www.applieddata.net/products.html + +The Linux support for this product has been provided by +Woojung Huh + +Use 'make adsbitsy_config' before any 'make config'. +This will set up defaults for ADS Bitsy support. + +The kernel zImage is linked to be loaded and executed at 0xc0400000. + +Linux can be used with the ADS BootLoader that ships with the +newer rev boards. See their documentation on how to load Linux. + +Supported peripherals: +- SA1100 LCD frame buffer (8/16bpp...sort of) +- SA1111 USB Master +- SA1100 serial port +- pcmcia, compact flash +- touchscreen(ucb1200) +- console on LCD screen +- serial ports (ttyS[0-2]) + - ttyS0 is default for serial console + +To do: +- everything else! :-) + +Notes: + +- The flash on board is divided into 3 partitions. + You should be careful to use flash on board. + It's partition is different from GraphicsClient Plus and GraphicsMaster + +- 16bpp mode requires a different cable than what ships with the board. + Contact ADS or look through the manual to wire your own. Currently, + if you compile with 16bit mode support and switch into a lower bpp + mode, the timing is off so the image is corrupted. This will be + fixed soon. + +Any contribution can be sent to nico@cam.org and will be greatly welcome! -- cgit v1.2.3